hlp/vx4-GuiLin-Gear
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
main
vx4-GuiLin-Gear/.svn/pristine/1d/1dc7cb5e65e3b4bf96791147779c571d17989e19.svn-base
T

3161 lines
141 KiB
Plaintext
Raw Permalink Blame History

#include "InkJetPrinter.h"
#include "ui_inkjetprinter.h"
#include "QDebug"
#include "LogInfo.h"
#include "mainwindow.h"
#include "./Network/NetworkManager.h"
#include "ZkEdit.h"
#include "myinclude.h"
//#include "PIDController/fuzzy_PID.h"
#include <QFile>
// ℃℉㎡±ΦφΩ◆✪@☢*✿❧
#include<iostream>
#include<string>
//#define DEBUG_CNT
#define MAX_VOL 300
#define MIN_VOL 0
void PID_init();
#define ONLYCNTCLEAR
extern MyInputMethod *myInputMethod;
static bool firstTime = 1;
InkJetPrinter::InkJetPrinter(QWidget *parent) :
QTabWidget(parent),
ui(new Ui::InkJetPrinter)
{
system("ifconfig eth1 down");
system("rm /usr/local/Trolltech/QtEmbedded-4.6.3-arm/lib/fonts/*.ttf > tty1");
ui->setupUi(this);
SysPara *para = new SysPara();
// t_label = new QLabel();
// t_label->setWindowFlags(Qt::WindowStaysOnTopHint);
// t_label->setGeometry(0,0,640,480);
// t_label->setPixmap(QPixmap(QString::fromUtf8(":/image/Turkey_logo.png")));
bindSysPara(para);
ui->tabMainWindow->bindSysPara(para);
sysPara->status.InkOrSOLVEmptyCnt=0;
t1.start();//calandar_and_dat_t
fileTransceiv = new FileTranseceiver(5001);
QObject::connect(fileTransceiv,SIGNAL(fileRecieved(QString)),this,SLOT(recievedFile2Save(QString)));
fileTransceiv->start();
//edit@12-30
tcpTransceiv = new FileTranseceiver(5002);
tcpTransceiv->start();
connect(ui->tabPrintSetting,SIGNAL(HiddenFunction(bool)),ui->tabMainWindow->getTexteditOption(),SLOT(SetHiddenValue(bool)));
ui->tabMainWindow->SetEditMode(sysPara->para.EditMode);
ui->tabOtherInfo->bindSysPara(para);
ui->tabPrintSetting->bindSysPara(para);
ui->tabSystemSetting->bindSysPara(para);
ui->tabOtherInfo->bindSysPara(para);
ui->tabTriggerMode->bindSysPara(para);
ui->tabSystemManage->bindSysPara(para);
ui->tabPicEdit->bindSysPara(para);
//#ifdef __NETWORKMANAGER__
#if 1
ui->tabNetworkManager->bindSysPara(para);
#else
//ui->tabNetworkManager->deleteLater();
removeTab(9);
#endif
//以下两个信号要在(ui->tabMainWindow->updateSysParaToUI();)之前绑定,否则获取不到文本框的更新值
connect (ui->tabTriggerMode,SIGNAL(autoUpdateFontWidthByTriggerCtrl(const unsigned int)),ui->tabPrintSetting,SLOT(autoUpdateFontWidth(const unsigned int)));
connect (ui->tabMainWindow,SIGNAL(autoUpdateFontWidthByMainWindow(const unsigned int)),ui->tabPrintSetting,SLOT(autoUpdateFontWidth(const unsigned int)));
ui->tabMainWindow->updateSysParaToUI();
ui->tabPrintSetting->updateSysParaToUI();
ui->tabPrintSetting->getFpgaVersionSetDisable();
ui->tabSystemSetting->updateSysParaToUI();
ui->tabOtherInfo->updateSysParaToUI();
ui->tabTriggerMode->updateSysParaToUI();
dlgShowMsg =new DlgShowMsg;
dlgShowMsg->hide();
timer = new QTimer();
connect(timer, SIGNAL(timeout()), this, SLOT(timerHandler()));
timer->start(10);
viscosity_timer = new QTimer();
connect(viscosity_timer, SIGNAL(timeout()), this, SLOT(viscosity_timerHandler()));
jd_timer = new QTimer();
connect(jd_timer, SIGNAL(timeout()), this, SLOT(jd_timerHandler()));
jd_timer->start(500);
jd_res = 0;
if(sysPara->para.gearPumpEnable)
{
pushButtonStartFlag = true;
}
//connect(this,SIGNAL(SpeedOver(int)),this,SLOT(OnSpeedOver(int)));
connect(this,SIGNAL(currentChanged(int)),this,SLOT(onInkJetPrinterCurrentChanged(int)));
connect(this,SIGNAL(setReclaimTankCurrentPos(int)),ui->tabMainWindow,SLOT(onReclainTankPositionChanged(int)));
connect(this,SIGNAL(reclaimTankCloseDone()),ui->tabMainWindow,SLOT(checkForPowerOff()));
connect(this,SIGNAL(reclaimTankBlock()),this,SLOT(onReclaimTankBlock()));
connect(ui->tabPrintSetting,SIGNAL(authChanged(int)),this,SLOT(onAuthChanged(int)));
connect (this,SIGNAL(sendPicScene(PicScene*)),ui->tabPrintSetting,SLOT(updateUIForSpecialCondition(PicScene*)));
connect(ui->tabPrintSetting,SIGNAL(authChanged(int)),ui->tabOtherInfo,SLOT(onAuthChanged(int)));
//test
connect(ui->tabMainWindow,SIGNAL(InkjetCleanUP()),ui->tabSystemSetting,SLOT(on_pushButtonCleanUP_pressed()));
connect(ui->tabMainWindow,SIGNAL(clearPressureFault()),this,SLOT(resetPressureCnt()));
connect(ui->tabSystemSetting,SIGNAL(pressureAdjust()),this,SLOT(pressureAdjustForsystemseeting()));
#ifdef COUNTER1_BY_GROUP /* 分段计米 */
connect(this,SIGNAL(updateCnt1GroupDisp(bool)),ui->tabPrintSetting,SLOT(onUpdateCnt1GroupDisp(bool)));
#endif
#ifdef COUNTER2_BY_GROUP /* 分段计米2 */
connect(this,SIGNAL(updateCnt2GroupDisp(bool)),ui->tabPrintSetting,SLOT(onUpdateCnt2GroupDisp(bool)));
#endif
msgtest = new QMessageBox(this);
connect(msgtest, SIGNAL(finished(int)), this, SLOT(OnFinished(int)));
#ifdef MIMA
connect(ui->tabPrintSetting->dlgInputAddr,SIGNAL(printErrorStatus(QString,unsigned int)),this,SLOT(onPrintErrorStatus(QString,unsigned int)));//
#endif
connect(ui->tabSystemSetting,SIGNAL(changeEditMode(int)),this,SLOT(onchangeEditMode(int)));
// connect(ui->tabSystemSetting,SIGNAL(changeEditMode(int)),ui->tabMainWindow,SLOT(changeEditMode(int)));
connect(ui->tabSystemSetting,SIGNAL(setRunStatus(QString )),ui->tabMainWindow,SLOT(setRunStatus(QString)));
connect(ui->tabSystemManage,SIGNAL(enableReclaimButton(bool)),ui->tabMainWindow,SLOT(onEnableReclaimCtrlButton(bool)));
connect(ui->tabSystemManage,SIGNAL(configChanged(void)),this,SLOT(onConfigChanged(void)));
connect(ui->tabPrintSetting, SIGNAL(change_OutputPulse()), ui->tabTriggerMode, SLOT(OutputPulse()));
connect (ui->tabMainWindow,SIGNAL(openFileChange()),ui->tabPrintSetting,SLOT( PrintupdateSysParaToUI() ));
connect (ui->tabMainWindow,SIGNAL(openFileChange()),ui->tabSystemSetting,SLOT( SystemupdateSysParaToUI() ));
connect (ui->tabMainWindow,SIGNAL(openFileChange()),ui->tabOtherInfo,SLOT( OtherupdateSysParaToUI() ));
connect (ui->tabMainWindow,SIGNAL(openFileChange()),ui->tabTriggerMode,SLOT( TriggerupdateSysParaToUI() ));
connect (ui->tabMainWindow,SIGNAL(openFileChange()),ui->tabMainWindow->getTexteditOption(),SLOT( updateSysParaToZero() ));
connect (ui->tabMainWindow,SIGNAL(setMainTabNow(int)),this,SLOT(setCurrentIndex(int)));
//if(sysPara->para.EditMode==PICFILE){
connect(ui->tabPrintSetting,SIGNAL(authChanged(int)),ui->tabPicEdit,SLOT(updateAuthorization(int)));// 字库编辑使能
connect (ui->tabPicEdit,SIGNAL(setMainTabNow(int)),this,SLOT(setCurrentIndex(int)));
connect (ui->tabPicEdit ,SIGNAL(openCurrentFile (QString ,bool )),ui->tabMainWindow,SLOT(openPicFIleOpen(QString ,bool )));
connect (ui->tabMainWindow,SIGNAL(openCurrFile(QString)),ui->tabPicEdit,SLOT( EditCurrFile(QString)));
connect (ui->tabPicEdit ,SIGNAL(setMainTabEdit (int)),ui->tabMainWindow,SLOT(SetMainTabEdit(int)));
//}
//connect (ui->tabPrintSetting,SIGNAL(setMainTabNow(int)),this,SLOT(setCurrentIndex(int)));
connect (ui->tabMainWindow,SIGNAL(openCurrFile(QString)),this,SLOT(onChangeTab(QString)));
connect (ui->tabMainWindow,SIGNAL(CloseJd()),this,SLOT(close_jd_timer()));
connect (ui->tabMainWindow,SIGNAL(pushButtonStartPressed(bool)),this,SLOT(handlePushButtonStartPressed(bool)));
connect (ui->tabMainWindow,SIGNAL(repeatInitedPid()),this,SLOT(handleInitedPID()));
connect (ui->tabMainWindow,SIGNAL(setCNT1Select(bool)),ui->tabPrintSetting,SLOT(setCNT1BackColor(bool)));
connect (ui->tabMainWindow,SIGNAL(setCNT2Select(bool)),ui->tabPrintSetting,SLOT(setCNT2BackColor(bool)));
connect (ui->tabMainWindow,SIGNAL(setCNT3Select(bool)),ui->tabPrintSetting,SLOT(setCNT3BackColor(bool)));
connect(ui->tabMainWindow,SIGNAL(setDisableAll()),this,SLOT(disableTabClick()));
sysPara->status.rWarnViscoReady=0;
#ifdef SYS_LINUX
onAuthChanged(AUTH_NONE);
#else
onAuthChanged(AUTH_NONE | AUTH_SUPER_USER2 |AUTH_DISPLAY_SYSTEM_SETTING| 0xffff);
#endif
sysPara->status.WorkTimeOut=0;
ui->tabMainWindow->changeEditMode(0);
emit onchangeEditMode(0); // 20140912
sysPara->devOp->printCtrl( PRINT_CTRL_STOP);
#ifdef MYTEST
onAuthChanged(AUTH_NONE | AUTH_SUPER_USER2 |AUTH_DISPLAY_SYSTEM_SETTING| 0xffff);
#else
ui->tabMainWindow->on_pushButtonReclaimTankClose_pressed();
#endif
sysPara->status.viscosityFaultCnt=0;
setCurrentIndex(0);
sysPara->status.updateSoftEN=0;
sysPara->status.adjHightVolInitEN=0;
sysPara->status.FileChangeRestCntFlag=0;
sysPara->status.HVFaultCloseEn=0;
sysPara->devOp->printCtrl( PRINT_CTRL_STOP);
sysPara->devOp->writeFpgaCalandar(1);//
//qDebug()<<sysPara->para.calandar_and_dat.year;
sysPara->status.cnt1GroupRunningIndex=0;
//sysPara->status.cnt1RepeatCurrent=0;
sysPara->status.cnt1GroupCurrentLoop=0;
//JSON data
connect(ui->tabNetworkManager, SIGNAL(updateJSONData()), ui->tabMainWindow, SLOT(JSON_UpdateDATA()), Qt::QueuedConnection);
connect(ui->tabNetworkManager,SIGNAL(net_stopPrint()),ui->tabMainWindow,SLOT(on_pushButtonStopPrint_pressed()), Qt::QueuedConnection);
connect(ui->tabMainWindow,SIGNAL(getJSONData()),ui->tabNetworkManager,SLOT(on_GetJsonpushButton_clicked()), Qt::QueuedConnection);
connect(ui->tabNetworkManager,SIGNAL(OpenNewFile()),ui->tabMainWindow->getTexteditOption(),SLOT(onOpenNewFile()), Qt::QueuedConnection);
//JSON data
#ifdef MODBUS
modbus = NULL;
memset((uint8_t *)&sysPara->modbusParas, 0, sizeof(sysPara->modbusParas));
sysPara->modbusStatus.receiveEnbleFlag = 1;
snprintf((char *)sysPara->modbusParas.selectFileName, sizeof(sysPara->modbusParas.selectFileName), "%s",QFileInfo(sysPara->para.lastOpenedFileName).fileName().toAscii().constData());
modbus = new ModbusTcp(&sysPara->modbusParas, &sysPara->modbusStatus);
connect(modbus, SIGNAL(updateQRcode()), ui->tabMainWindow, SLOT(modbusUpdateQRCode()), Qt::QueuedConnection);
connect(modbus, SIGNAL(openFile(QString,bool)), ui->tabMainWindow->getTexteditOption(), SLOT(onFileOpen(QString,bool)), Qt::QueuedConnection);
connect(modbus, SIGNAL(startPrint()), ui->tabMainWindow, SLOT(on_pushButtonStartPrint_pressed()), Qt::QueuedConnection);
connect(modbus, SIGNAL(pausePrint()), ui->tabMainWindow, SLOT(on_pushButtonPausePrint_pressed()), Qt::QueuedConnection);//暂时屏蔽排除问题
connect(modbus,SIGNAL(stopPrint()),ui->tabMainWindow,SLOT(on_pushButtonStopPrint_pressed()), Qt::QueuedConnection);
connect(modbus,SIGNAL(writeCalendar()),this,SLOT(onModbusWriteCalendar()), Qt::QueuedConnection);
connect(modbus,SIGNAL(writeCalendar1()),this,SLOT(onModbusWriteCalendar1CurrValue()), Qt::QueuedConnection);
connect(modbus,SIGNAL(writeCalendar1EndValue()),this,SLOT(onModbusWriteCalendar1EndValue()), Qt::QueuedConnection);
connect(modbus,SIGNAL(writeCalendar2EndValue()),this,SLOT(onModbusWriteCalendar2EndValue()), Qt::QueuedConnection);
connect(modbus,SIGNAL(writeCalendar2RepeatValue()),this,SLOT(onModbusWriteCalendar2RepeatValue()), Qt::QueuedConnection);
connect(modbus,SIGNAL(writeCalendar2InitValue()),this,SLOT(onModbusWriteCalendar2InitValue()), Qt::QueuedConnection);
connect(modbus,SIGNAL(CNTResetNow()),ui->tabMainWindow,SLOT(onModbusCNTResetNowPressed()), Qt::QueuedConnection);
connect(modbus,SIGNAL(faultResume()),ui->tabMainWindow,SLOT(onLabelFaultRusumePressed()), Qt::QueuedConnection);
connect(modbus,SIGNAL(receivedPrintContent(int)),ui->tabMainWindow,SLOT(onModbusPrintReceivedContent(int)), Qt::QueuedConnection);
connect(modbus,SIGNAL(mbLineAndCharSpace(int, int)),ui->tabMainWindow->getTexteditOption(),SLOT(onMbSetLineAndChar(int, int)), Qt::QueuedConnection);
connect(this,SIGNAL(updataPara2UI()),ui->tabPrintSetting,SLOT( PrintupdateSysParaToUI() ), Qt::QueuedConnection);
connect(this, SIGNAL(openFile(QString,bool)), ui->tabMainWindow->getTexteditOption(), SLOT(onFileOpen(QString,bool)), Qt::QueuedConnection);
connect(this, SIGNAL(startPrint()), ui->tabMainWindow, SLOT(on_pushButtonStartPrint_pressed()), Qt::QueuedConnection);
#endif
ui->tabMainWindow->enableReclaimCtrlButton(false);
//edit@12-14
connect(this,SIGNAL(currentChanged(int)),ui->tabMainWindow,SLOT(onInkJetPrinterCurrentChanged(int)), Qt::QueuedConnection);
#ifdef __STC_POWER__
if(sysPara->devOp->getPowerSource() == POWER_SOURCE_TIMER)
{
sysPara->status.powerSource = POWER_SOURCE_TIMER;
sysPara->status.needPowerOffTimerout = 1;
sysPara->status.waitPowerOffTime = 18; //运行半个钟
LogInfo::setRunStatusText(tr("定时开机"));
//qDebug()<<"power by:"<< sysPara->status.powerSource;
}
else
{
sysPara->status.powerSource = POWER_SOURCE_KEY;
sysPara->status.needPowerOffTimerout = 0;
}
//sysPara->devOp->setWakeUpTimer(3);
qDebug()<<"power by:"<< sysPara->status.powerSource;
#endif
//pidControllerInit();
PID_init();
#ifndef __DAC_ADJ_FUNCTION__
qDebug()<<"__DAC_ADJ_FUNCTION__";
removeTab(indexOf(ui->tabDacAdjust));
removeTab(indexOf(ui->tabFpgaDebug));
#else
// qDebug()<<"!!!!!!!!!!!!!!!!!!!!deleteLater";
removeTab(indexOf(ui->tabDacAdjust));
removeTab(indexOf(ui->tabFpgaDebug));
// removeTab(indexOf(ui->tabNetworkManager));
ui->tabWidget->removeTab(ui->tabWidget->indexOf(ui->tab_3));
ui->vol0SpinBox->setMinimum(0);
ui->vol1SpinBox->setMinimum(0);
ui->vol2SpinBox->setMinimum(0);
ui->vol3SpinBox->setMinimum(0);
ui->vol4SpinBox->setMinimum(0);
ui->vol5SpinBox->setMinimum(0);
ui->vol6SpinBox->setMinimum(0);
ui->vol7SpinBox->setMinimum(0);
ui->vol8SpinBox->setMinimum(0);
ui->vol9SpinBox->setMinimum(0);
ui->vol10SpinBox->setMinimum(0);
ui->vol11SpinBox->setMinimum(0);
ui->vol12SpinBox->setMinimum(0);
ui->vol13SpinBox->setMinimum(0);
ui->vol14SpinBox->setMinimum(0);
ui->vol15SpinBox->setMinimum(0);
ui->vol16SpinBox->setMinimum(0);
ui->vol17SpinBox->setMinimum(0);
ui->vol18SpinBox->setMinimum(0);
ui->vol19SpinBox->setMinimum(0);
ui->vol20SpinBox->setMinimum(0);
ui->vol21SpinBox->setMinimum(0);
ui->vol22SpinBox->setMinimum(0);
ui->vol23SpinBox->setMinimum(0);
ui->vol24SpinBox->setMinimum(0);
ui->vol25SpinBox->setMinimum(0);
ui->vol26SpinBox->setMinimum(0);
ui->vol27SpinBox->setMinimum(0);
ui->vol28SpinBox->setMinimum(0);
ui->vol29SpinBox->setMinimum(0);
ui->vol30SpinBox->setMinimum(0);
ui->vol31SpinBox->setMinimum(0);
ui->vol32SpinBox->setMinimum(0);
ui->vol33SpinBox->setMinimum(0);
ui->vol34SpinBox->setMinimum(0);
ui->vol35SpinBox->setMinimum(0);
ui->vol36SpinBox->setMinimum(0);
ui->vol37SpinBox->setMinimum(0);
ui->vol38SpinBox->setMinimum(0);
ui->vol39SpinBox->setMinimum(0);
ui->vol0SpinBox->setMaximum(MAX_VOL);
ui->vol1SpinBox->setMaximum(MAX_VOL);
ui->vol2SpinBox->setMaximum(MAX_VOL);
ui->vol3SpinBox->setMaximum(MAX_VOL);
ui->vol4SpinBox->setMaximum(MAX_VOL);
ui->vol5SpinBox->setMaximum(MAX_VOL);
ui->vol6SpinBox->setMaximum(MAX_VOL);
ui->vol7SpinBox->setMaximum(MAX_VOL);
ui->vol8SpinBox->setMaximum(MAX_VOL);
ui->vol9SpinBox->setMaximum(MAX_VOL);
ui->vol10SpinBox->setMaximum(MAX_VOL);
ui->vol11SpinBox->setMaximum(MAX_VOL);
ui->vol12SpinBox->setMaximum(MAX_VOL);
ui->vol13SpinBox->setMaximum(MAX_VOL);
ui->vol14SpinBox->setMaximum(MAX_VOL);
ui->vol15SpinBox->setMaximum(MAX_VOL);
ui->vol16SpinBox->setMaximum(MAX_VOL);
ui->vol17SpinBox->setMaximum(MAX_VOL);
ui->vol18SpinBox->setMaximum(MAX_VOL);
ui->vol19SpinBox->setMaximum(MAX_VOL);
ui->vol20SpinBox->setMaximum(MAX_VOL);
ui->vol21SpinBox->setMaximum(MAX_VOL);
ui->vol22SpinBox->setMaximum(MAX_VOL);
ui->vol23SpinBox->setMaximum(MAX_VOL);
ui->vol24SpinBox->setMaximum(MAX_VOL);
ui->vol25SpinBox->setMaximum(MAX_VOL);
ui->vol26SpinBox->setMaximum(MAX_VOL);
ui->vol27SpinBox->setMaximum(MAX_VOL);
ui->vol28SpinBox->setMaximum(MAX_VOL);
ui->vol29SpinBox->setMaximum(MAX_VOL);
ui->vol30SpinBox->setMaximum(MAX_VOL);
ui->vol31SpinBox->setMaximum(MAX_VOL);
ui->vol32SpinBox->setMaximum(MAX_VOL);
ui->vol33SpinBox->setMaximum(MAX_VOL);
ui->vol34SpinBox->setMaximum(MAX_VOL);
ui->vol35SpinBox->setMaximum(MAX_VOL);
ui->vol36SpinBox->setMaximum(MAX_VOL);
ui->vol37SpinBox->setMaximum(MAX_VOL);
ui->vol38SpinBox->setMaximum(MAX_VOL);
ui->vol39SpinBox->setMaximum(MAX_VOL);
ui->fvol0SpinBox->setMinimum(0);
ui->fvol1SpinBox->setMinimum(0);
ui->fvol2SpinBox->setMinimum(0);
ui->fvol3SpinBox->setMinimum(0);
ui->fvol4SpinBox->setMinimum(0);
ui->fvol5SpinBox->setMinimum(0);
ui->fvol6SpinBox->setMinimum(0);
ui->fvol7SpinBox->setMinimum(0);
ui->fvol8SpinBox->setMinimum(0);
ui->fvol9SpinBox->setMinimum(0);
ui->fvol10SpinBox->setMinimum(0);
ui->fvol11SpinBox->setMinimum(0);
ui->fvol12SpinBox->setMinimum(0);
ui->fvol13SpinBox->setMinimum(0);
ui->fvol14SpinBox->setMinimum(0);
ui->fvol15SpinBox->setMinimum(0);
ui->fvol16SpinBox->setMinimum(0);
ui->fvol17SpinBox->setMinimum(0);
ui->fvol18SpinBox->setMinimum(0);
ui->fvol19SpinBox->setMinimum(0);
ui->fvol20SpinBox->setMinimum(0);
ui->fvol21SpinBox->setMinimum(0);
ui->fvol22SpinBox->setMinimum(0);
ui->fvol23SpinBox->setMinimum(0);
ui->fvol24SpinBox->setMinimum(0);
ui->fvol25SpinBox->setMinimum(0);
ui->fvol26SpinBox->setMinimum(0);
ui->fvol27SpinBox->setMinimum(0);
ui->fvol28SpinBox->setMinimum(0);
ui->fvol29SpinBox->setMinimum(0);
ui->fvol30SpinBox->setMinimum(0);
ui->fvol31SpinBox->setMinimum(0);
ui->fvol32SpinBox->setMinimum(0);
ui->fvol33SpinBox->setMinimum(0);
ui->fvol34SpinBox->setMinimum(0);
ui->fvol35SpinBox->setMinimum(0);
ui->fvol36SpinBox->setMinimum(0);
ui->fvol37SpinBox->setMinimum(0);
ui->fvol38SpinBox->setMinimum(0);
ui->fvol39SpinBox->setMinimum(0);
ui->fvol0SpinBox->setMaximum(MAX_VOL);
ui->fvol1SpinBox->setMaximum(MAX_VOL);
ui->fvol2SpinBox->setMaximum(MAX_VOL);
ui->fvol3SpinBox->setMaximum(MAX_VOL);
ui->fvol4SpinBox->setMaximum(MAX_VOL);
ui->fvol5SpinBox->setMaximum(MAX_VOL);
ui->fvol6SpinBox->setMaximum(MAX_VOL);
ui->fvol7SpinBox->setMaximum(MAX_VOL);
ui->fvol8SpinBox->setMaximum(MAX_VOL);
ui->fvol9SpinBox->setMaximum(MAX_VOL);
ui->fvol10SpinBox->setMaximum(MAX_VOL);
ui->fvol11SpinBox->setMaximum(MAX_VOL);
ui->fvol12SpinBox->setMaximum(MAX_VOL);
ui->fvol13SpinBox->setMaximum(MAX_VOL);
ui->fvol14SpinBox->setMaximum(MAX_VOL);
ui->fvol15SpinBox->setMaximum(MAX_VOL);
ui->fvol16SpinBox->setMaximum(MAX_VOL);
ui->fvol17SpinBox->setMaximum(MAX_VOL);
ui->fvol18SpinBox->setMaximum(MAX_VOL);
ui->fvol19SpinBox->setMaximum(MAX_VOL);
ui->fvol20SpinBox->setMaximum(MAX_VOL);
ui->fvol21SpinBox->setMaximum(MAX_VOL);
ui->fvol22SpinBox->setMaximum(MAX_VOL);
ui->fvol23SpinBox->setMaximum(MAX_VOL);
ui->fvol24SpinBox->setMaximum(MAX_VOL);
ui->fvol25SpinBox->setMaximum(MAX_VOL);
ui->fvol26SpinBox->setMaximum(MAX_VOL);
ui->fvol27SpinBox->setMaximum(MAX_VOL);
ui->fvol28SpinBox->setMaximum(MAX_VOL);
ui->fvol29SpinBox->setMaximum(MAX_VOL);
ui->fvol30SpinBox->setMaximum(MAX_VOL);
ui->fvol31SpinBox->setMaximum(MAX_VOL);
ui->fvol32SpinBox->setMaximum(MAX_VOL);
ui->fvol33SpinBox->setMaximum(MAX_VOL);
ui->fvol34SpinBox->setMaximum(MAX_VOL);
ui->fvol35SpinBox->setMaximum(MAX_VOL);
ui->fvol36SpinBox->setMaximum(MAX_VOL);
ui->fvol37SpinBox->setMaximum(MAX_VOL);
ui->fvol38SpinBox->setMaximum(MAX_VOL);
ui->fvol39SpinBox->setMaximum(MAX_VOL);
ui->cVol0SpinBox->setMinimum(0);
ui->cVol1SpinBox->setMinimum(0);
ui->cVol2SpinBox->setMinimum(0);
ui->cVol3SpinBox->setMinimum(0);
ui->cVol4SpinBox->setMinimum(0);
ui->cVol5SpinBox->setMinimum(0);
ui->cVol6SpinBox->setMinimum(0);
ui->cVol7SpinBox->setMinimum(0);
ui->cVol8SpinBox->setMinimum(0);
ui->cVol9SpinBox->setMinimum(0);
ui->cVol10SpinBox->setMinimum(0);
ui->cVol11SpinBox->setMinimum(0);
ui->cVol12SpinBox->setMinimum(0);
ui->cVol13SpinBox->setMinimum(0);
ui->cVol14SpinBox->setMinimum(0);
ui->cVol15SpinBox->setMinimum(0);
ui->cVol16SpinBox->setMinimum(0);
ui->cVol17SpinBox->setMinimum(0);
ui->cVol18SpinBox->setMinimum(0);
ui->cVol19SpinBox->setMinimum(0);
ui->cVol20SpinBox->setMinimum(0);
ui->cVol21SpinBox->setMinimum(0);
ui->cVol22SpinBox->setMinimum(0);
ui->cVol23SpinBox->setMinimum(0);
ui->cVol24SpinBox->setMinimum(0);
ui->cVol25SpinBox->setMinimum(0);
ui->cVol26SpinBox->setMinimum(0);
ui->cVol27SpinBox->setMinimum(0);
ui->cVol28SpinBox->setMinimum(0);
ui->cVol29SpinBox->setMinimum(0);
ui->cVol30SpinBox->setMinimum(0);
ui->cVol31SpinBox->setMinimum(0);
ui->cVol32SpinBox->setMinimum(0);
ui->cVol33SpinBox->setMinimum(0);
ui->cVol34SpinBox->setMinimum(0);
ui->cVol35SpinBox->setMinimum(0);
ui->cVol36SpinBox->setMinimum(0);
ui->cVol37SpinBox->setMinimum(0);
ui->cVol38SpinBox->setMinimum(0);
ui->cVol39SpinBox->setMinimum(0);
ui->cVol0SpinBox->setMaximum(MAX_VOL);
ui->cVol1SpinBox->setMaximum(MAX_VOL);
ui->cVol2SpinBox->setMaximum(MAX_VOL);
ui->cVol3SpinBox->setMaximum(MAX_VOL);
ui->cVol4SpinBox->setMaximum(MAX_VOL);
ui->cVol5SpinBox->setMaximum(MAX_VOL);
ui->cVol6SpinBox->setMaximum(MAX_VOL);
ui->cVol7SpinBox->setMaximum(MAX_VOL);
ui->cVol8SpinBox->setMaximum(MAX_VOL);
ui->cVol9SpinBox->setMaximum(MAX_VOL);
ui->cVol10SpinBox->setMaximum(MAX_VOL);
ui->cVol11SpinBox->setMaximum(MAX_VOL);
ui->cVol12SpinBox->setMaximum(MAX_VOL);
ui->cVol13SpinBox->setMaximum(MAX_VOL);
ui->cVol14SpinBox->setMaximum(MAX_VOL);
ui->cVol15SpinBox->setMaximum(MAX_VOL);
ui->cVol16SpinBox->setMaximum(MAX_VOL);
ui->cVol17SpinBox->setMaximum(MAX_VOL);
ui->cVol18SpinBox->setMaximum(MAX_VOL);
ui->cVol19SpinBox->setMaximum(MAX_VOL);
ui->cVol20SpinBox->setMaximum(MAX_VOL);
ui->cVol21SpinBox->setMaximum(MAX_VOL);
ui->cVol22SpinBox->setMaximum(MAX_VOL);
ui->cVol23SpinBox->setMaximum(MAX_VOL);
ui->cVol24SpinBox->setMaximum(MAX_VOL);
ui->cVol25SpinBox->setMaximum(MAX_VOL);
ui->cVol26SpinBox->setMaximum(MAX_VOL);
ui->cVol27SpinBox->setMaximum(MAX_VOL);
ui->cVol28SpinBox->setMaximum(MAX_VOL);
ui->cVol29SpinBox->setMaximum(MAX_VOL);
ui->cVol30SpinBox->setMaximum(MAX_VOL);
ui->cVol31SpinBox->setMaximum(MAX_VOL);
ui->cVol32SpinBox->setMaximum(MAX_VOL);
ui->cVol33SpinBox->setMaximum(MAX_VOL);
ui->cVol34SpinBox->setMaximum(MAX_VOL);
ui->cVol35SpinBox->setMaximum(MAX_VOL);
ui->cVol36SpinBox->setMaximum(MAX_VOL);
ui->cVol37SpinBox->setMaximum(MAX_VOL);
ui->cVol38SpinBox->setMaximum(MAX_VOL);
ui->cVol39SpinBox->setMaximum(MAX_VOL);
loadVoltageValue();
connect(ui->savePushButton,SIGNAL(clicked()), this,SLOT( DacAdjustStore()));
#endif
#ifdef __FPGA_DEBUG__
connect(ui->fpgaWriteBytePushButton,SIGNAL(clicked()), this,SLOT( fpgaDebugWriteByte()));
connect(ui->fpgaReadBytePushButton,SIGNAL(clicked()), this,SLOT( fpgaDebugReadByte()));
connect(ui->fpgaWriteWordPushButton,SIGNAL(clicked()), this,SLOT( fpgaDebugWriteWord()));
connect(ui->fpgaReadWordPushButton,SIGNAL(clicked()), this,SLOT( fpgaDebugReadWord()));
connect(ui->fpgaWriteDWordPushButton,SIGNAL(clicked()), this,SLOT( fpgaDebugWriteDWord()));
connect(ui->fpgaReadDWordPushButton,SIGNAL(clicked()), this,SLOT( fpgaDebugReadDWord()));
#endif
sysPara->status.statWarn = sysPara->status.statWarn | WARN_STATUS_INK_WARN; //先置墨水标示为1
sleep(3);
}
void InkJetPrinter::loadVoltageValue()
{
#ifdef __DAC_ADJ_FUNCTION__
ui->vol0SpinBox->setValue(sysPara->para.printed_adj_dac[0]);
ui->vol1SpinBox->setValue(sysPara->para.printed_adj_dac[1]);
ui->vol2SpinBox->setValue(sysPara->para.printed_adj_dac[2]);
ui->vol3SpinBox->setValue(sysPara->para.printed_adj_dac[3]);
ui->vol4SpinBox->setValue(sysPara->para.printed_adj_dac[4]);
ui->vol5SpinBox->setValue(sysPara->para.printed_adj_dac[5]);
ui->vol6SpinBox->setValue(sysPara->para.printed_adj_dac[6]);
ui->vol7SpinBox->setValue(sysPara->para.printed_adj_dac[7]);
ui->vol8SpinBox->setValue(sysPara->para.printed_adj_dac[8]);
ui->vol9SpinBox->setValue(sysPara->para.printed_adj_dac[9]);
ui->vol10SpinBox->setValue(sysPara->para.printed_adj_dac[10]);
ui->vol11SpinBox->setValue(sysPara->para.printed_adj_dac[11]);
ui->vol12SpinBox->setValue(sysPara->para.printed_adj_dac[12]);
ui->vol13SpinBox->setValue(sysPara->para.printed_adj_dac[13]);
ui->vol14SpinBox->setValue(sysPara->para.printed_adj_dac[14]);
ui->vol15SpinBox->setValue(sysPara->para.printed_adj_dac[15]);
ui->vol16SpinBox->setValue(sysPara->para.printed_adj_dac[16]);
ui->vol17SpinBox->setValue(sysPara->para.printed_adj_dac[17]);
ui->vol18SpinBox->setValue(sysPara->para.printed_adj_dac[18]);
ui->vol19SpinBox->setValue(sysPara->para.printed_adj_dac[19]);
ui->vol20SpinBox->setValue(sysPara->para.printed_adj_dac[20]);
ui->vol21SpinBox->setValue(sysPara->para.printed_adj_dac[21]);
ui->vol22SpinBox->setValue(sysPara->para.printed_adj_dac[22]);
ui->vol23SpinBox->setValue(sysPara->para.printed_adj_dac[23]);
ui->vol24SpinBox->setValue(sysPara->para.printed_adj_dac[24]);
ui->vol25SpinBox->setValue(sysPara->para.printed_adj_dac[25]);
ui->vol26SpinBox->setValue(sysPara->para.printed_adj_dac[26]);
ui->vol27SpinBox->setValue(sysPara->para.printed_adj_dac[27]);
ui->vol28SpinBox->setValue(sysPara->para.printed_adj_dac[28]);
ui->vol29SpinBox->setValue(sysPara->para.printed_adj_dac[29]);
ui->vol30SpinBox->setValue(sysPara->para.printed_adj_dac[30]);
ui->vol31SpinBox->setValue(sysPara->para.printed_adj_dac[31]);
ui->vol32SpinBox->setValue(sysPara->para.printed_adj_dac[32]);
ui->vol33SpinBox->setValue(sysPara->para.printed_adj_dac[33]);
ui->vol34SpinBox->setValue(sysPara->para.printed_adj_dac[34]);
ui->vol35SpinBox->setValue(sysPara->para.printed_adj_dac[35]);
ui->vol36SpinBox->setValue(sysPara->para.printed_adj_dac[36]);
ui->vol37SpinBox->setValue(sysPara->para.printed_adj_dac[37]);
ui->vol38SpinBox->setValue(sysPara->para.printed_adj_dac[38]);
ui->vol39SpinBox->setValue(sysPara->para.printed_adj_dac[39]);
ui->cVol0SpinBox->setValue(sysPara->para.printed_continue_col_dac[0]);
ui->cVol1SpinBox->setValue(sysPara->para.printed_continue_col_dac[1]);
ui->cVol2SpinBox->setValue(sysPara->para.printed_continue_col_dac[2]);
ui->cVol3SpinBox->setValue(sysPara->para.printed_continue_col_dac[3]);
ui->cVol4SpinBox->setValue(sysPara->para.printed_continue_col_dac[4]);
ui->cVol5SpinBox->setValue(sysPara->para.printed_continue_col_dac[5]);
ui->cVol6SpinBox->setValue(sysPara->para.printed_continue_col_dac[6]);
ui->cVol7SpinBox->setValue(sysPara->para.printed_continue_col_dac[7]);
ui->cVol8SpinBox->setValue(sysPara->para.printed_continue_col_dac[8]);
ui->cVol9SpinBox->setValue(sysPara->para.printed_continue_col_dac[9]);
ui->cVol10SpinBox->setValue(sysPara->para.printed_continue_col_dac[10]);
ui->cVol11SpinBox->setValue(sysPara->para.printed_continue_col_dac[11]);
ui->cVol12SpinBox->setValue(sysPara->para.printed_continue_col_dac[12]);
ui->cVol13SpinBox->setValue(sysPara->para.printed_continue_col_dac[13]);
ui->cVol14SpinBox->setValue(sysPara->para.printed_continue_col_dac[14]);
ui->cVol15SpinBox->setValue(sysPara->para.printed_continue_col_dac[15]);
ui->cVol16SpinBox->setValue(sysPara->para.printed_continue_col_dac[16]);
ui->cVol17SpinBox->setValue(sysPara->para.printed_continue_col_dac[17]);
ui->cVol18SpinBox->setValue(sysPara->para.printed_continue_col_dac[18]);
ui->cVol19SpinBox->setValue(sysPara->para.printed_continue_col_dac[19]);
ui->cVol20SpinBox->setValue(sysPara->para.printed_continue_col_dac[20]);
ui->cVol21SpinBox->setValue(sysPara->para.printed_continue_col_dac[21]);
ui->cVol22SpinBox->setValue(sysPara->para.printed_continue_col_dac[22]);
ui->cVol23SpinBox->setValue(sysPara->para.printed_continue_col_dac[23]);
ui->cVol24SpinBox->setValue(sysPara->para.printed_continue_col_dac[24]);
ui->cVol25SpinBox->setValue(sysPara->para.printed_continue_col_dac[25]);
ui->cVol26SpinBox->setValue(sysPara->para.printed_continue_col_dac[26]);
ui->cVol27SpinBox->setValue(sysPara->para.printed_continue_col_dac[27]);
ui->cVol28SpinBox->setValue(sysPara->para.printed_continue_col_dac[28]);
ui->cVol29SpinBox->setValue(sysPara->para.printed_continue_col_dac[29]);
ui->cVol30SpinBox->setValue(sysPara->para.printed_continue_col_dac[30]);
ui->cVol31SpinBox->setValue(sysPara->para.printed_continue_col_dac[31]);
ui->cVol32SpinBox->setValue(sysPara->para.printed_continue_col_dac[32]);
ui->cVol33SpinBox->setValue(sysPara->para.printed_continue_col_dac[33]);
ui->cVol34SpinBox->setValue(sysPara->para.printed_continue_col_dac[34]);
ui->cVol35SpinBox->setValue(sysPara->para.printed_continue_col_dac[35]);
ui->cVol36SpinBox->setValue(sysPara->para.printed_continue_col_dac[36]);
ui->cVol37SpinBox->setValue(sysPara->para.printed_continue_col_dac[37]);
ui->cVol38SpinBox->setValue(sysPara->para.printed_continue_col_dac[38]);
ui->cVol39SpinBox->setValue(sysPara->para.printed_continue_col_dac[39]);
ui->fvol0SpinBox->setValue(sysPara->para.printed_full_col_dac[0]);
ui->fvol1SpinBox->setValue(sysPara->para.printed_full_col_dac[1]);
ui->fvol2SpinBox->setValue(sysPara->para.printed_full_col_dac[2]);
ui->fvol3SpinBox->setValue(sysPara->para.printed_full_col_dac[3]);
ui->fvol4SpinBox->setValue(sysPara->para.printed_full_col_dac[4]);
ui->fvol5SpinBox->setValue(sysPara->para.printed_full_col_dac[5]);
ui->fvol6SpinBox->setValue(sysPara->para.printed_full_col_dac[6]);
ui->fvol7SpinBox->setValue(sysPara->para.printed_full_col_dac[7]);
ui->fvol8SpinBox->setValue(sysPara->para.printed_full_col_dac[8]);
ui->fvol9SpinBox->setValue(sysPara->para.printed_full_col_dac[9]);
ui->fvol10SpinBox->setValue(sysPara->para.printed_full_col_dac[10]);
ui->fvol11SpinBox->setValue(sysPara->para.printed_full_col_dac[11]);
ui->fvol12SpinBox->setValue(sysPara->para.printed_full_col_dac[12]);
ui->fvol13SpinBox->setValue(sysPara->para.printed_full_col_dac[13]);
ui->fvol14SpinBox->setValue(sysPara->para.printed_full_col_dac[14]);
ui->fvol15SpinBox->setValue(sysPara->para.printed_full_col_dac[15]);
ui->fvol16SpinBox->setValue(sysPara->para.printed_full_col_dac[16]);
ui->fvol17SpinBox->setValue(sysPara->para.printed_full_col_dac[17]);
ui->fvol18SpinBox->setValue(sysPara->para.printed_full_col_dac[18]);
ui->fvol19SpinBox->setValue(sysPara->para.printed_full_col_dac[19]);
ui->fvol20SpinBox->setValue(sysPara->para.printed_full_col_dac[20]);
ui->fvol21SpinBox->setValue(sysPara->para.printed_full_col_dac[21]);
ui->fvol22SpinBox->setValue(sysPara->para.printed_full_col_dac[22]);
ui->fvol23SpinBox->setValue(sysPara->para.printed_full_col_dac[23]);
ui->fvol24SpinBox->setValue(sysPara->para.printed_full_col_dac[24]);
ui->fvol25SpinBox->setValue(sysPara->para.printed_full_col_dac[25]);
ui->fvol26SpinBox->setValue(sysPara->para.printed_full_col_dac[26]);
ui->fvol27SpinBox->setValue(sysPara->para.printed_full_col_dac[27]);
ui->fvol28SpinBox->setValue(sysPara->para.printed_full_col_dac[28]);
ui->fvol29SpinBox->setValue(sysPara->para.printed_full_col_dac[29]);
ui->fvol30SpinBox->setValue(sysPara->para.printed_full_col_dac[30]);
ui->fvol31SpinBox->setValue(sysPara->para.printed_full_col_dac[31]);
ui->fvol32SpinBox->setValue(sysPara->para.printed_full_col_dac[32]);
ui->fvol33SpinBox->setValue(sysPara->para.printed_full_col_dac[33]);
ui->fvol34SpinBox->setValue(sysPara->para.printed_full_col_dac[34]);
ui->fvol35SpinBox->setValue(sysPara->para.printed_full_col_dac[35]);
ui->fvol36SpinBox->setValue(sysPara->para.printed_full_col_dac[36]);
ui->fvol37SpinBox->setValue(sysPara->para.printed_full_col_dac[37]);
ui->fvol38SpinBox->setValue(sysPara->para.printed_full_col_dac[38]);
ui->fvol39SpinBox->setValue(sysPara->para.printed_full_col_dac[39]);
if(sysPara->para.dacScale < 40 || sysPara->para.dacScale>150)
sysPara->para.dacScale = 100;
//ui->dacScaledSpinBox->setValue(sysPara->para.dacScale);
//memcpy(sysPara->status.printed_adj_dac, sysPara->para.printed_adj_dac, sizeof(sysPara->para.printed_adj_dac));
#endif
}
float PID_realize(float speed);
#if 1
struct _pid{
float SetSpeed;//定义设定值
float ActualSpeed;//定义实际值
float err;//定义偏差值
float err_last;//定义上一个偏差值
float Kp,Ki,Kd;//定义比例、积分、微分系数
float voltage;//定义电压值(控制执行器的变量)
float integral;//定义积分值
float integral_max; //积分限幅（根据实际调整）
}pid;
#if 0
int main()
{
cout<<"System begin \n";
PID_init();
int count=0;
while(count<1000)
{
float speed=PID_realize(200.0);
cout<<"第 "<<count<<" 次的速度为: "<<speed<<endl;
count++;
}
return 0;
}
#endif
void PID_init(){
//cout<<"PID_init begin \n";
pid.SetSpeed=0.0;
pid.ActualSpeed=0.0;
pid.err=0.0;
pid.err_last=0.0;
pid.voltage=0.0;
pid.integral=0.0;
pid.Kp=0.21; //0.25
pid.Ki=0.006; //0.015
pid.Kd=0.0;
//cout<<"PID_init end \n";
}
static float u = 1.0;
float PID_realize(float speed, float act){
unsigned char index = 1;
pid.SetSpeed=speed;
pid.ActualSpeed = act;
pid.err=pid.SetSpeed-pid.ActualSpeed;
if(u < 900)
{
pid.integral+=pid.err;
}
pid.voltage=pid.Kp*pid.err + index*pid.Ki*pid.integral + pid.Kd*(pid.err-pid.err_last);
pid.err_last=pid.err;
pid.ActualSpeed =pid.voltage*1.0;
return pid.ActualSpeed;
}
#endif
float PID_realize2(float speed, float act){
pid.Kp = 0.8;
pid.Ki = 0.02;
pid.Kd = 0.5;
pid.integral_max = 10000;
pid.SetSpeed=speed;
pid.ActualSpeed = act;
pid.err=pid.SetSpeed-pid.ActualSpeed;
float Pout = pid.Kp * pid.err;
pid.integral += pid.err;
if (pid.integral > pid.integral_max) {
pid.integral = pid.integral_max;
} else if (pid.integral < -pid.integral_max) {
pid.integral = -pid.integral_max;
}
float Iout = pid.Ki * pid.integral;
float Dout = pid.Kd * ((pid.err + pid.err_last)/2 - pid.err_last);
pid.voltage = Pout + Iout + Dout;
pid.err_last=pid.err;
return pid.voltage;
}
void InkJetPrinter::pressureAdj(int type)
{
//float u, actual;
signed short delta_u;
signed short old = (signed short)sysPara->para.gearPumpValue;
static unsigned int oldPressure = 0;
static qint32 printOut = 0;
if(printOut++%2 !=0) {
return;
}
int oldTargetPresuure = sysPara->para.pressure;
if(type == 1){
sysPara->para.pressure = sysPara->para.pressure*1.2;
}
if(!sysPara->status.gearPumpRunStopFlag)
{
if(sysPara->para.gearPumpEnable && sysPara->para.flagOfReclaimPumEnable)
u=PID_realize2((float)sysPara->para.pressure,(float)sysPara->status.PRESSURE);
else if(u > 0 || ((sysPara->para.pressure - sysPara->status.PRESSURE) > 0) )
{
u=PID_realize((float)sysPara->para.pressure,(float)sysPara->status.PRESSURE);
}
}
if(u > 0)
{
sysPara->para.gearPumpValue = (unsigned short)u;
}
else
{
sysPara->para.gearPumpValue = 0;
}
if(sysPara->para.gearPumpValue>800) {
sysPara->para.gearPumpValue = 800;
}
/*********************改回收泵后压力调整*********************************/
if(sysPara->para.gearPumpValue && sysPara->para.flagOfReclaimPumEnable){
if(sysPara->para.gearPumpValue < 60)
sysPara->para.gearPumpValue = 75;
else if(sysPara->para.gearPumpValue > 200)
sysPara->para.gearPumpValue = 200;
}
/************************************************************/
if(sysPara->status.gearPumpRunStopFlag)
{
sysPara->para.gearPumpValue = 0;
}
if(sysPara->status.flagOfSpeedAlarm)
sysPara->para.gearPumpValue = 0;
sysPara->devOp->WriteMoterPump();
oldPressure = sysPara->status.PRESSURE;
sysPara->para.pressure = oldTargetPresuure;
}
void InkJetPrinter::DacAdjustStore()
{
#ifdef __DAC_ADJ_FUNCTION__
sysPara->para.printed_adj_dac[0] = ui->vol0SpinBox->value();
sysPara->para.printed_adj_dac[1] = ui->vol1SpinBox->value();
sysPara->para.printed_adj_dac[2] = ui->vol2SpinBox->value();
sysPara->para.printed_adj_dac[3] = ui->vol3SpinBox->value();
sysPara->para.printed_adj_dac[4] = ui->vol4SpinBox->value();
sysPara->para.printed_adj_dac[5] = ui->vol5SpinBox->value();
sysPara->para.printed_adj_dac[6] = ui->vol6SpinBox->value();
sysPara->para.printed_adj_dac[7] = ui->vol7SpinBox->value();
sysPara->para.printed_adj_dac[8] = ui->vol8SpinBox->value();
sysPara->para.printed_adj_dac[9] = ui->vol9SpinBox->value();
sysPara->para.printed_adj_dac[10] = ui->vol10SpinBox->value();
sysPara->para.printed_adj_dac[11] = ui->vol11SpinBox->value();
sysPara->para.printed_adj_dac[12] = ui->vol12SpinBox->value();
sysPara->para.printed_adj_dac[13] = ui->vol13SpinBox->value();
sysPara->para.printed_adj_dac[14] = ui->vol14SpinBox->value();
sysPara->para.printed_adj_dac[15] = ui->vol15SpinBox->value();
sysPara->para.printed_adj_dac[16] = ui->vol16SpinBox->value();
sysPara->para.printed_adj_dac[17] = ui->vol17SpinBox->value();
sysPara->para.printed_adj_dac[18] = ui->vol18SpinBox->value();
sysPara->para.printed_adj_dac[19] = ui->vol19SpinBox->value();
sysPara->para.printed_adj_dac[20] = ui->vol20SpinBox->value();
sysPara->para.printed_adj_dac[21] = ui->vol21SpinBox->value();
sysPara->para.printed_adj_dac[22] = ui->vol22SpinBox->value();
sysPara->para.printed_adj_dac[23] = ui->vol23SpinBox->value();
sysPara->para.printed_adj_dac[24] = ui->vol24SpinBox->value();
sysPara->para.printed_adj_dac[25] = ui->vol25SpinBox->value();
sysPara->para.printed_adj_dac[26] = ui->vol26SpinBox->value();
sysPara->para.printed_adj_dac[27] = ui->vol27SpinBox->value();
sysPara->para.printed_adj_dac[28] = ui->vol28SpinBox->value();
sysPara->para.printed_adj_dac[29] = ui->vol29SpinBox->value();
sysPara->para.printed_adj_dac[30] = ui->vol30SpinBox->value();
sysPara->para.printed_adj_dac[31] = ui->vol31SpinBox->value();
sysPara->para.printed_adj_dac[32] = ui->vol32SpinBox->value();
sysPara->para.printed_adj_dac[33] = ui->vol33SpinBox->value();
sysPara->para.printed_adj_dac[34] = ui->vol34SpinBox->value();
sysPara->para.printed_adj_dac[35] = ui->vol35SpinBox->value();
sysPara->para.printed_adj_dac[36] = ui->vol36SpinBox->value();
sysPara->para.printed_adj_dac[37] = ui->vol37SpinBox->value();
sysPara->para.printed_adj_dac[38] = ui->vol38SpinBox->value();
sysPara->para.printed_adj_dac[39] = ui->vol39SpinBox->value();
//memcpy(sysPara->para.printed_adj_dac, sysPara->status.printed_adj_dac, sizeof(sysPara->para.printed_adj_dac));
sysPara->para.printed_continue_col_dac[0] = ui->cVol0SpinBox->value();
sysPara->para.printed_continue_col_dac[1] = ui->cVol1SpinBox->value();
sysPara->para.printed_continue_col_dac[2] = ui->cVol2SpinBox->value();
sysPara->para.printed_continue_col_dac[3] = ui->cVol3SpinBox->value();
sysPara->para.printed_continue_col_dac[4] = ui->cVol4SpinBox->value();
sysPara->para.printed_continue_col_dac[5] = ui->cVol5SpinBox->value();
sysPara->para.printed_continue_col_dac[6] = ui->cVol6SpinBox->value();
sysPara->para.printed_continue_col_dac[7] = ui->cVol7SpinBox->value();
sysPara->para.printed_continue_col_dac[8] = ui->cVol8SpinBox->value();
sysPara->para.printed_continue_col_dac[9] = ui->cVol9SpinBox->value();
sysPara->para.printed_continue_col_dac[10] = ui->cVol10SpinBox->value();
sysPara->para.printed_continue_col_dac[11] = ui->cVol11SpinBox->value();
sysPara->para.printed_continue_col_dac[12] = ui->cVol12SpinBox->value();
sysPara->para.printed_continue_col_dac[13] = ui->cVol13SpinBox->value();
sysPara->para.printed_continue_col_dac[14] = ui->cVol14SpinBox->value();
sysPara->para.printed_continue_col_dac[15] = ui->cVol15SpinBox->value();
sysPara->para.printed_continue_col_dac[16] = ui->cVol16SpinBox->value();
sysPara->para.printed_continue_col_dac[17] = ui->cVol17SpinBox->value();
sysPara->para.printed_continue_col_dac[18] = ui->cVol18SpinBox->value();
sysPara->para.printed_continue_col_dac[19] = ui->cVol19SpinBox->value();
sysPara->para.printed_continue_col_dac[20] = ui->cVol20SpinBox->value();
sysPara->para.printed_continue_col_dac[21] = ui->cVol21SpinBox->value();
sysPara->para.printed_continue_col_dac[22] = ui->cVol22SpinBox->value();
sysPara->para.printed_continue_col_dac[23] = ui->cVol23SpinBox->value();
sysPara->para.printed_continue_col_dac[24] = ui->cVol24SpinBox->value();
sysPara->para.printed_continue_col_dac[25] = ui->cVol25SpinBox->value();
sysPara->para.printed_continue_col_dac[26] = ui->cVol26SpinBox->value();
sysPara->para.printed_continue_col_dac[27] = ui->cVol27SpinBox->value();
sysPara->para.printed_continue_col_dac[28] = ui->cVol28SpinBox->value();
sysPara->para.printed_continue_col_dac[29] = ui->cVol29SpinBox->value();
sysPara->para.printed_continue_col_dac[30] = ui->cVol30SpinBox->value();
sysPara->para.printed_continue_col_dac[31] = ui->cVol31SpinBox->value();
sysPara->para.printed_continue_col_dac[32] = ui->cVol32SpinBox->value();
sysPara->para.printed_continue_col_dac[33] = ui->cVol33SpinBox->value();
sysPara->para.printed_continue_col_dac[34] = ui->cVol34SpinBox->value();
sysPara->para.printed_continue_col_dac[35] = ui->cVol35SpinBox->value();
sysPara->para.printed_continue_col_dac[36] = ui->cVol36SpinBox->value();
sysPara->para.printed_continue_col_dac[37] = ui->cVol37SpinBox->value();
sysPara->para.printed_continue_col_dac[38] = ui->cVol38SpinBox->value();
sysPara->para.printed_continue_col_dac[39] = ui->cVol39SpinBox->value();
sysPara->para.printed_full_col_dac[0] = ui->fvol0SpinBox->value();
sysPara->para.printed_full_col_dac[1] = ui->fvol1SpinBox->value();
sysPara->para.printed_full_col_dac[2] = ui->fvol2SpinBox->value();
sysPara->para.printed_full_col_dac[3] = ui->fvol3SpinBox->value();
sysPara->para.printed_full_col_dac[4] = ui->fvol4SpinBox->value();
sysPara->para.printed_full_col_dac[5] = ui->fvol5SpinBox->value();
sysPara->para.printed_full_col_dac[6] = ui->fvol6SpinBox->value();
sysPara->para.printed_full_col_dac[7] = ui->fvol7SpinBox->value();
sysPara->para.printed_full_col_dac[8] = ui->fvol8SpinBox->value();
sysPara->para.printed_full_col_dac[9] = ui->fvol9SpinBox->value();
sysPara->para.printed_full_col_dac[10] = ui->fvol10SpinBox->value();
sysPara->para.printed_full_col_dac[11] = ui->fvol11SpinBox->value();
sysPara->para.printed_full_col_dac[12] = ui->fvol12SpinBox->value();
sysPara->para.printed_full_col_dac[13] = ui->fvol13SpinBox->value();
sysPara->para.printed_full_col_dac[14] = ui->fvol14SpinBox->value();
sysPara->para.printed_full_col_dac[15] = ui->fvol15SpinBox->value();
sysPara->para.printed_full_col_dac[16] = ui->fvol16SpinBox->value();
sysPara->para.printed_full_col_dac[17] = ui->fvol17SpinBox->value();
sysPara->para.printed_full_col_dac[18] = ui->fvol18SpinBox->value();
sysPara->para.printed_full_col_dac[19] = ui->fvol19SpinBox->value();
sysPara->para.printed_full_col_dac[20] = ui->fvol20SpinBox->value();
sysPara->para.printed_full_col_dac[21] = ui->fvol21SpinBox->value();
sysPara->para.printed_full_col_dac[22] = ui->fvol22SpinBox->value();
sysPara->para.printed_full_col_dac[23] = ui->fvol23SpinBox->value();
sysPara->para.printed_full_col_dac[24] = ui->fvol24SpinBox->value();
sysPara->para.printed_full_col_dac[25] = ui->fvol25SpinBox->value();
sysPara->para.printed_full_col_dac[26] = ui->fvol26SpinBox->value();
sysPara->para.printed_full_col_dac[27] = ui->fvol27SpinBox->value();
sysPara->para.printed_full_col_dac[28] = ui->fvol28SpinBox->value();
sysPara->para.printed_full_col_dac[29] = ui->fvol29SpinBox->value();
sysPara->para.printed_full_col_dac[30] = ui->fvol30SpinBox->value();
sysPara->para.printed_full_col_dac[31] = ui->fvol31SpinBox->value();
sysPara->para.printed_full_col_dac[32] = ui->fvol32SpinBox->value();
sysPara->para.printed_full_col_dac[33] = ui->fvol33SpinBox->value();
sysPara->para.printed_full_col_dac[34] = ui->fvol34SpinBox->value();
sysPara->para.printed_full_col_dac[35] = ui->fvol35SpinBox->value();
sysPara->para.printed_full_col_dac[36] = ui->fvol36SpinBox->value();
sysPara->para.printed_full_col_dac[37] = ui->fvol37SpinBox->value();
sysPara->para.printed_full_col_dac[38] = ui->fvol38SpinBox->value();
sysPara->para.printed_full_col_dac[39] = ui->fvol39SpinBox->value();
//sysPara->para.dacScale = ui->dacScaledSpinBox->value();
sysPara->devOp->writeFpgaPrintPara();
#endif
}
InkJetPrinter::~InkJetPrinter()
{
delete ui;
delete timer;
#ifdef MODBUS
if (modbus) {
delete modbus;
}
#endif
if (fileTransceiv) {
fileTransceiv->deleteLater();
}
//edit@01-03
if (tcpTransceiv) {
tcpTransceiv->deleteLater();
}
}
void InkJetPrinter::jd_timerHandler(void)
{
static int count_time = 0;
count_time++;
if(count_time>= 20){ //each 10s
count_time = 0;
#ifdef MIMA
jd_res = ui->tabPrintSetting->dlgInputAddr->isEnabled();
// qDebug()<<"jd_timerHandler";
#endif
#ifdef __RFID_CARD
static uint lastSecondes = QDateTime::currentDateTime().toTime_t();
static uint noticeICReaderErrorTime = QDateTime::currentDateTime().toTime_t();
QString str = "";
unsigned char showFlag = 0;
if(QDateTime::currentDateTime().toTime_t() - noticeICReaderErrorTime > 1800)
{
noticeICReaderErrorTime = QDateTime::currentDateTime().toTime_t();
sysPara->devOp->setICReaderModeFlag = true;
//if(sysPara->devOp->noticeICReaderError)
if(sysPara->devOp->queryReadRFID_address() == 2)
{
msgtest->setText(tr("读卡器故障!"));
msgtest->show();
LogInfo::setRunStatusText(tr("13.读卡器故障!"));
}
sysPara->devOp->setICReaderModeFlag = false;
}
#endif
}
}
extern void MySleep(unsigned int msec);
extern unsigned char test_flag;
bool gearPumpRunNormalFlag = false;
void InkJetPrinter::timerHandler(void){
// QFile file("/usr/local/Trolltech/QtEmbedded-4.6.3-arm/lib/libQtssl.o");
int pulse_100ms = 0;
int pulse_1s = 0;
int pulse_10s = 0;
int pulse_100s = 0;
int pulse_300ms = 0;
static int pulse_3s = 0;
static int pulse_4s = 0;
static int pulse_5s = 0;
static int reciclar_30s = 0;
static int pulse_30s = 0;
static int xxxm=0;
// static char res=0;
static int save_weeknum = 0;
static bool gearPumpRunFlag = false;
static bool ControledSwitchFlag = false;
static bool gearPumpStartFlag = false;
static bool delay3s;
//gearPumpRunStopFlag = false;
bool InkSwintFlag = false,lastInkSwintFlag = false;
static float gearPumpRunNormalValue = 0.0;
#ifdef DEBUG1
sysPara->status.selfCheckDone=1;
#endif
if(sysPara){
#ifdef MODBUS
// processCommands();
#endif
#ifdef MIMA
if(xxxm==0)
{
#ifdef AM335TEST
#else
#ifdef MYTEST
xxxm=1;
#else
QFile file("/usr/local/Trolltech/QtEmbedded-4.6.3-arm/lib/libQtssl.o");
if(!file.exists()) return;
#endif
#endif
}
xxxm=1;
#endif
sysPara->para.ReadFileErrorCnt=0; // 正常打开文件
// /opt/FriendlyARM/mini2440/rootfs_qtopia_qt4/usr/local/Trolltech/QtEmbedded-4.6.3-arm/lib
if(sysPara->para.gearPumpEnable)
{
ui->tabMainWindow->enablePushButtonStart(true);
if(!pushButtonStartFlag)
{
gearPumpRunNormalFlag = false;
}
//ui->tabSystemSetting->setSpinBoxPressureMaxValue(900);
if(!gearPumpRunFlag)
{
ui->tabMainWindow->enableReclaimCtrlButton(false);
}
}
else
{
ui->tabMainWindow->enablePushButtonStart(false);
//ui->tabSystemSetting->setSpinBoxPressureMaxValue(5000);
}
/*-----------------------形成脉冲-----------------------------*/
sysPara->status.delay10ms ++;
if(sysPara->status.delay10ms == 10){
pulse_100ms = 1;
sysPara->status.delay10ms = 0;
}
if(pulse_100ms){
sysPara->status.delay100ms ++;
if(sysPara->status.delay100ms == 10){
pulse_1s = 1;
sysPara->status.delay100ms = 0;
}
pulse_300ms = (sysPara->status.delay100ms%3) == 0; //1秒3次，并非精确的300ms
}
if((sysPara->status.delay10ms%3) == 0) //读取状态后再检測
{
if(!(sysPara->status.statWarn & WARN_STATUS_INK_WARN) && !gearPumpRunFlag && !sysPara->status.isPumpValveControledByHand)//刚启动前3秒
{
if(sysPara->para.gearPumpEnable) {
sysPara->para.gearPumpValue = 150;
sysPara->devOp->WriteMoterPump();
gearPumpStartFlag = true;
}
}
}
if(pushButtonStartFlag && sysPara->status.selfCheckDone)
{
if((sysPara->status.PRESSURE > (sysPara->para.pressure -10)) && (sysPara->status.PRESSURE < (sysPara->para.pressure +10)))
{
if(pulse_1s)
{
pulse_5s++;
}
if( pulse_5s == 5)
{
pulse_5s = 0;
gearPumpRunNormalFlag = true;
gearPumpRunNormalValue = u;
}
}
}
if(sysPara->status.isPumpValveControledByHand)
{
gearPumpRunNormalFlag = false;
ControledSwitchFlag = false;
pulse_3s = 0;
}
if(!(sysPara->status.statWarn & WARN_STATUS_INK_SWINT)){//墨线开关,压力抖动
InkSwintFlag = true;
}
else
{
InkSwintFlag = false;
}
if(lastInkSwintFlag != InkSwintFlag)
{
lastInkSwintFlag = InkSwintFlag;
gearPumpRunNormalFlag = false;
}
if(gearPumpRunNormalFlag && !sysPara->status.isPumpValveControledByHand && sysPara->para.gearPumpEnable)
{
static int count_3s = 0;
if(u > gearPumpRunNormalValue*1.5)//改大一点
{
if(pulse_1s)
{
count_3s++;
if(count_3s == 3)
{
count_3s = 0;
ui->tabMainWindow->setRunStatus(tr("压力泄漏或压力传感器故障!"));
sysPara->status.gearPumpRunStopFlag = true;
gearPumpRunNormalFlag = false;
LogInfo::setRunStatusText(tr("运行中压力泄漏，停齿轮泵!"));
}
}
}
else
{
count_3s = 0;
}
}
if(sysPara->para.gearPumpEnable && (sysPara->status.gearPumpRunSpeed < 100) && test_flag){
if(test_flag % 2)
ui->tabMainWindow->on_pushButtonReclaimTankClose_pressed();
test_flag = 0;
}
if(pulse_1s) {
if(sysPara->status.selfCheckDone && sysPara->para.gearPumpEnable && sysPara->para.flagOfReclaimPumEnable)
checkPressureControl();
if((QTime::currentTime()>=QTime(00,00,00))&&(QTime::currentTime()<=QTime(00,00,02))&&sysPara->para.Reciclar){
if(ui->tabMainWindow->getCurrPrintStatus() != 1){
ui->tabMainWindow->_on_pushButtonPowerOff_pressed(false);
LogInfo::setRunStatusText(tr("测试时间结束，准备关机"));
ui->tabMainWindow->setRunStatus(tr("测试时间结束，准备关机"));
}
}
if(sysPara->status.selfCheckDone && sysPara->para.Reciclar && test_flag){
reciclar_30s++;
if(reciclar_30s > 30){
reciclar_30s = 0;
test_flag++;
}
}
else if(reciclar_30s){
reciclar_30s = 0;
}
QDate d = QDate::currentDate();
if(save_weeknum == 0)
{
save_weeknum = d.weekNumber();
}
if(save_weeknum != d.weekNumber())
{
sysPara->devOp->writeFpgaCalandar(1);
save_weeknum = d.weekNumber();
}
sysPara->status.delay1s ++;
if(sysPara->status.delay1s == 3 && !delay3s)
delay3s = true;
if(sysPara->status.delay1s == 10){
pulse_10s = 1;
sysPara->status.delay1s = 0;
}
//if(pushButtonStartFlag)
pulse_4s++;
if(gearPumpStartFlag)
{
pulse_3s ++;
if(pulse_3s == 3)
{
pulse_3s = 0;
gearPumpRunFlag = true;
ControledSwitchFlag = true;
}
}
#ifdef QTV4
if( sysPara->status.reclainTankReachEnd) sysPara->para.openInkLineTime++;
#else
if( sysPara->status.reclainTankReachEnd) sysPara->para.openInkLineTime++;
#endif
}
if(pulse_10s){
#ifdef __STC_POWER__
{
sysPara->devOp->Heartbeat(1);
}
#endif
sysPara->status.delay10s ++;
if(sysPara->status.delay10s == 10){
pulse_100s = 1;
sysPara->status.delay10s = 0;
#ifdef __STC_POWER__
if(!sysPara->status.selfCheckDone){
qDebug()<<"gearPumpRunFlag: "<<gearPumpRunFlag;
qDebug()<<"gearPumpEnable: "<<sysPara->para.gearPumpEnable;
}
qDebug()<<"needPowerOffTimerout: "<<sysPara->status.needPowerOffTimerout;
qDebug()<<"getCurrPrintStatus: "<<ui->tabMainWindow->getCurrPrintStatus();
if(sysPara->status.needPowerOffTimerout && (ui->tabMainWindow->getCurrPrintStatus() != 1))
{
qDebug()<<"waitPowerOffTime: "<<sysPara->status.waitPowerOffTime;
if(sysPara->status.waitPowerOffTime)
{
sysPara->status.waitPowerOffTime--;
if(!sysPara->status.waitPowerOffTime)
{
ui->tabMainWindow->_on_pushButtonPowerOff_pressed(false);
LogInfo::setRunStatusText(tr("定时开机循环完成，准备关机"));
ui->tabMainWindow->setRunStatus(tr("准备关机"));
}
}
}
#endif
}
#ifdef AM335TEST
jd_res =0;
#else
#endif
}
/*------------------------------------------------------*/
#ifdef UART2
static bool Flag300=0;
if(sysPara->status.ExtScreenEn && sysPara->para.ExtScreenType)
{
if(sysPara->para.ExtScreenType==2)
{
if(pulse_300ms)
{
if(Flag300) sysPara->devOp->RecDim();
else sysPara->devOp->DatToDisp2();
Flag300 = !Flag300;
}
}
else if(pulse_1s)
{
if(Flag300) sysPara->devOp->RecDim();
else sysPara->devOp->DatToDisp2();
Flag300 = !Flag300;
}
sysPara->devOp->recUart2();
}
#endif
sysPara->devOp->readFgaStatus();
sysPara->status.gearPumpRunSpeed = 0;
#if 0
unsigned char ByteData = 0;
static unsigned char lastByteData = 0;
sysPara->devOp->fpgaRd(0x00fc,(unsigned char *)&ByteData,1);//读取1字节
//ui->tabMainWindow->setRunStatus(tr("ByteData:<%1>").arg(ByteData));
if((ByteData & 0x80) != lastByteData)
{
//LogInfo::setRunStatusText(tr("结果:%1").arg(ByteData & 0x80));
lastByteData = ByteData & 0x80;
if(sysPara->status.selfCheckDone)
{
if(ui->tabMainWindow->getCurrPrintStatus() == 3)
{
ui->tabMainWindow->on_pushButtonStartPrint_pressed();
}
else
{
ui->tabMainWindow->on_pushButtonStopPrint_pressed();
}
}
}
#endif
// unsigned int PulseMs = 0; //时间间隔
unsigned int PulseCnt = 0; //时间间隔内的脉冲累计数
sysPara->devOp->fpgaRd(0x004E,(unsigned char *)&PulseCnt,2);//读取脉冲个数低字节
{
sysPara->status.gearPumpRunSpeed = (PulseCnt * 60 * 1000) / (500 * 2);
}
if(!sysPara->para.gearPumpEnable)
sysPara->status.PRESSURE *= 5; //响应群众号召，数值放大五倍
sysPara->devOp->ReadSomeDataForLostPrint();
#ifdef UART1
if(pulse_100ms){
//static int uartReadcnt=0;
emit sysPara->devOp->readUart1();
}
#endif
/*-------------------------------------------------------*/
bool lostCommuFlag = 0;
if(sysPara->status.configDone){
lostCommuFlag = sysPara->status.maginNum != FPGA_MAGIC_NUM_AFTER_CONF;
}
else {
lostCommuFlag = sysPara->status.maginNum != FPAG_INIT_MAGIC_NUM;
}
#ifdef AM335TEST
sysPara->status.WorkTimeOut=0;
#else
#ifdef MIMAgearPumpRunFlag
if(jd_res &(1<<2)) {
sysPara->status.WorkTimeOut=1;
}
#endif
#endif
#ifdef X86TEST
lostCommuFlag=0;
#endif
#ifdef MODBUS
if(sysPara->status.delay10ms%5 == 0)
{
#if 1 //复位发送打印数据
if((ui->tabMainWindow->getCurrPrintStatus() == 1)&&sysPara->para.ResetSendData)
{
static bool oneTimeFlag = false;
if(sysPara->status.productCnt== 0 && (oneTimeFlag==false))//计米复位发送打印数据
{
oneTimeFlag = true;
ui->tabMainWindow->on_pushButtonStartPrint_pressed();
//复位重设起始值
if(sysPara->para.cnt1ResetToInitValue)
{
sysPara->para.cnt1CurrValue = sysPara->para.cnt1StartValue;
sysPara->status.cnt1CurrentValueInitDoneFlag = false;
sysPara->devOp->writeFpgaCalandar(0);
}
}
if(sysPara->status.productCnt != 0)
{
oneTimeFlag = false;
}
}
#endif
static unsigned int lastProductCount=0;
if(sysPara->status.productCnt != lastProductCount || sysPara->status.printDoneFlag)
{
sysPara->status.printDoneFlag = false;
lastProductCount = sysPara->status.productCnt;
sysPara->modbusStatus.printFinishFlag = 1;
memcpy((void*)(&sysPara->modbusStatus.orderCode), (void*)(&sysPara->modbusParas.QRcode_buf), 2);//写返回序列号
ui->tabMainWindow->UpdateDateTimeQRCode(QDateTime::currentDateTime().toString("hh:mm"));
/*************************************
if(sysPara->para.alterPrint.enable){
sysPara->status.alterPrintCnt++;
if(sysPara->status.alterPrintCnt == sysPara->para.alterPrint.repeatValue){
sysPara->status.alterPrintCnt =0;
sysPara->para.AlterMode = 1;
}
if(sysPara->status.alterPrintCnt <=sysPara->para.alterPrint.repeatValue - sysPara->para.alterPrint.repeatPrintTimes)
sysPara->para.AlterMode = 1;
else
sysPara->para.AlterMode = 2;
ui->tabMainWindow->alterDataPrint (sysPara->para.AlterMode);
}
/**************************************/
}
if (modbus->getModbusStatus() == 1) {
refreshModbusStatus();
}
}
#endif
if(lostCommuFlag){
static unsigned char lostCommuCnt=0;
if(sysPara->status.currentRunStatus != RUN_STATUS_LOST_COMMUNICATION_WITH_FPGA) {
// 增加FPGA通信异常判别阀值，避免产生误判。2017.8.30
if(lostCommuCnt<10) lostCommuCnt ++;
else {
sysPara->status.fpgaVersionNum = 0;
LogInfo::setRunStatusText(tr("与FPGA失去通信!!!"));
sysPara->devOp->controlCompressPump(false);
sysPara->devOp->controlCycleValve(false);
sysPara->devOp->controlInkValve(false);
sysPara->devOp->controlInkValvePWM(false);
sysPara->devOp->controlMainInkPump(false);
sysPara->devOp->controlMixValve(false);
//sysPara->devOp->controlReclaimPump(false);
sysPara->devOp->controlViscosityPump(false);
sysPara->devOp->controlReleaseValve(false);
sysPara->devOp->controlHeater(false);
qDebug()<<"lostCommuteCation now."<<sysPara->status.maginNum;
}
}
sysPara->status.currentRunStatus = RUN_STATUS_LOST_COMMUNICATION_WITH_FPGA;
}
else if(!sysPara->status.lostCommuFlag && !SIMULATE_PRINTING_MODE) {
if(sysPara->status.currentRunStatus == RUN_STATUS_LOST_COMMUNICATION_WITH_FPGA)
LogInfo::setRunStatusText(tr("与FPGA通信恢复正常"));
sysPara->status.currentRunStatus = RUN_STATUS_IDLE;
if(gearPumpRunFlag || sysPara->para.gearPumpEnable == 0)
{
if(!sysPara->status.selfCheckDone)
{ /*开机自检*/
autoControlValvePump();
pressureAdj(0);
/*-----------------------------------------------------*/
if(!sysPara->status.selfCheckCnt) {
LogInfo::setRunStatusText(tr("开始自检,请等待60秒..............."));
ui->tabMainWindow->enableReclaimCtrlButton(false);
ui->tabMainWindow->enablePrintButton(false);
sysPara->devOp->mainInkCtrl();
sysPara->para.TrunOnPowerCnt++;// 20151218 开机次数加1
sysPara->saveParaToFile(); // 保存开机次数值
sysPara->status.lastProductCnt = sysPara->status.productCnt ; //这会让产品计数显示出来
ui->tabMainWindow->updateTotalCnt(0);
#ifdef X86TEST
// if(sysPara->status.selfCheckCnt < MAX_SELF_CHECK_CNT-2)sysPara->status.selfCheckCnt = MAX_SELF_CHECK_CNT-2;
#endif
}
if((sysPara->status.selfCheckCnt % 100) == 0)
ui->tabMainWindow->setRunStatus(tr("开始自检,请等待%1秒...............").arg((MAX_SELF_CHECK_CNT - sysPara->status.selfCheckCnt)/100));
sysPara->status.selfCheckCnt ++;
if(sysPara->status.selfCheckCnt >= MAX_SELF_CHECK_CNT)
{
sysPara->status.selfCheckDone = 1;
LogInfo::setRunStatusText(tr("自检完成!!!"));
ui->tabMainWindow->setRunStatus(tr("自检完成!!!"));
qDebug()<<"自检完成!!!";
ui->tabPrintSetting->PrintSettingLog();
ui->tabMainWindow->enableReclaimCtrlButton(true);
sysPara->devOp->mainInkCtrl();
sysPara->status.canRunAirPushing = true;
if(sysPara->para.Reciclar)
test_flag = 1;
}
else {
if((sysPara->status.selfCheckCnt % 200) == 0)
// sysPara->devOp->controlReclaimTankOpen(false);
ui->tabMainWindow->enableReclaimCtrlButton(false);
}
}
else {
// 开机自检完成的前提下
if (!sysPara->status.airPushing || ui->tabMainWindow->m_2sFlag) {
autoControlValvePump();
}
if(sysPara->para.gearPumpEnable && !sysPara->status.isPumpValveControledByHand && ControledSwitchFlag) {
pressureAdj(0);
}
}
}
else{
static bool flag = 1;
if(delay3s){
if(flag){
flag = 0;
LogInfo::setRunStatusText(tr("缺少墨水,喷码机不能正常工作!"));
qDebug()<<"缺少墨水,喷码机不能正常工作!";
}
ui->tabMainWindow->setRunStatus(tr("缺少墨水,喷码机不能正常工作!"));
}
}
/*----------------------------控制温度--------------------------------------*/
if(pulse_100ms){
autoControlHeater();
sysPara->devOp->readSyncCounterAtZero();
}
}
sysPara->status.lostCommuFlag = lostCommuFlag; //务必放在后面
static unsigned int lastProductCnt =0;
static int lastalterMode=-1;
if(sysPara->para.alterPrint.enable)
{
sysPara->para.AlterMode=sysPara->status.AlterMode; // 电眼触发交替功能：新增这一行
if( (sysPara->para.AlterMode!=lastalterMode)
// || (lastProductCnt != sysPara->status.productCnt)
)
{
ui->tabMainWindow->alterDataPrint (sysPara->para.AlterMode);
}
}
else sysPara->para.AlterMode=0;
lastalterMode = sysPara->para.AlterMode;
lastProductCnt = sysPara->status.productCnt;
ui->tabMainWindow->CheckStatus(pulse_300ms); //
/*----------------------------------界面更新状态---------------------------------------*/
if(pulse_300ms){
#ifdef __RFID_CARD
if(!sysPara->devOp->setICReaderModeFlag)
{
sysPara->devOp->strRevdata ="";
sysPara->devOp->receiveReadRFID_data();
if(sysPara->devOp->strRevdata.length() > 1)
{
if((sysPara->devOp->strRevdata.left(3) == QString::number(ui->tabPrintSetting->dlgInputAddr->jd.addr).left(3))\
|| sysPara->devOp->strRevdata.left(3) == "100")
{
if(sysPara->devOp->strRevdata.at(3) == 'A')
{
if(sysPara->devOp->comWriteRFID_data() == 1)//把卡数据清零
{
sysPara->RFIDPara.InkRFIDCnt = 0;
sysPara->RFIDPara.PrintInkDots = 0;
sysPara->saveRFIDPara();
sysPara->devOp->checkCardIntervalTime = QDateTime::currentDateTime().toTime_t();
msgtest->setText(tr("刷墨水卡成功!"));
msgtest->show();
ui->tabMainWindow->setRunStatus(tr("刷墨水卡成功!"));
LogInfo::setRunStatusText(tr("刷墨水卡成功!"));
}
}
else if(sysPara->devOp->strRevdata.at(3) == 'B')
{
if(sysPara->devOp->comWriteRFID_data() == 1)//把卡数据清零
{
sysPara->RFIDPara.SOLVRFIDCnt = 0;
sysPara->RFIDPara.solventNumber = 0;
sysPara->saveRFIDPara();
sysPara->devOp->checkCardIntervalTime = QDateTime::currentDateTime().toTime_t();
msgtest->setText(tr("刷溶剂卡成功!"));
msgtest->show();
ui->tabMainWindow->setRunStatus(tr("刷溶剂卡成功!"));
LogInfo::setRunStatusText(tr("刷溶剂卡成功!"));
}
}
else
{
msgtest->setText(tr("MAC无效卡!"));
msgtest->show();
LogInfo::setRunStatusText(tr("MAC无效卡!"));
}
}
else
{
msgtest->setText(tr("无效卡!"));
msgtest->show();
LogInfo::setRunStatusText(tr("无效卡!"));
}
}
}
#endif
sysPara->devOp->readCalandarDat(); //务必读一下此数据
#ifdef RANDDEBUG
if(sysPara->status.RandomNum>0)
sysPara->devOp->Read_RanddomFromFpga();
#endif
#ifdef COUNTER1_BY_GROUP /* 分段计米 */
cnt1GroupCheck();//分段计米
#endif
#ifdef COUNTER2_BY_GROUP /* 分段计米2 */
cnt2GroupCheck();//分段计米2
#endif
QWidget *widget = this->currentWidget();
/*-------移植RFID卡功能模块之前的代码
//无墨水或溶剂3小时，自动关机
if(sysPara->status.InkOrSOLVEmptyCnt>MAX_INK_SOLV_EMTYTIME-10)
{
if(!sysPara->status.powerOffAfterInkOrSOLVEmptyAppending){
sysPara->status.powerOffAfterInkOrSOLVEmptyAppending = 1;
ui->tabMainWindow->_on_pushButtonPowerOff_pressed(false);
LogInfo::setRunStatusText(tr("墨水或溶剂空，准备关机"));
ui->tabMainWindow->setRunStatus(tr("墨水或溶剂空，准备关机"));
}
}*/
#ifdef __RFID_CARD
//无墨水或溶剂3小时，自动关机
if(sysPara->RFIDPara.InkEmptyCnt == MAX_INK_EMTYTIME)
{
if(!sysPara->status.powerOffAfterInkOrSOLVEmptyAppending){
sysPara->RFIDPara.InkEmptyCnt = MAX_INK_EMTYTIME + 10;
sysPara->status.powerOffAfterInkOrSOLVEmptyAppending = 1;
LogInfo::setRunStatusText(tr("9.墨水空,机器自动关机"));
ui->tabMainWindow->setRunStatus(tr("9.墨水空,机器自动关机"));
ui->tabMainWindow->_on_pushButtonPowerOff_pressed(false);
}
}
else if(sysPara->RFIDPara.SOLVEmptyCnt == MAX_SOLV_EMTYTIME)
{
if(!sysPara->status.powerOffAfterInkOrSOLVEmptyAppending){
sysPara->RFIDPara.SOLVEmptyCnt = MAX_SOLV_EMTYTIME + 10;
sysPara->status.powerOffAfterInkOrSOLVEmptyAppending = 1;
LogInfo::setRunStatusText(tr("10.溶剂空,机器自动关机"));
ui->tabMainWindow->setRunStatus(tr("10.溶剂空,机器自动关机"));
ui->tabMainWindow->_on_pushButtonPowerOff_pressed(false);
}
}
else if(sysPara->RFIDPara.InkEmptyCnt >= (MAX_INK_EMTYTIME + 130))
{
if(!sysPara->status.powerOffAfterInkOrSOLVEmptyAppending){
sysPara->RFIDPara.InkEmptyCnt = MAX_INK_EMTYTIME + 10;
sysPara->status.powerOffAfterInkOrSOLVEmptyAppending = 1;
LogInfo::setRunStatusText(tr("11.墨水空,机器再次自动关机"));
ui->tabMainWindow->setRunStatus(tr("11.墨水空,机器再次自动关机"));
ui->tabMainWindow->_on_pushButtonPowerOff_pressed(false);
}
}
else if(sysPara->RFIDPara.SOLVEmptyCnt >= (MAX_SOLV_EMTYTIME + 130))
{
if(!sysPara->status.powerOffAfterInkOrSOLVEmptyAppending){
sysPara->RFIDPara.SOLVEmptyCnt = MAX_SOLV_EMTYTIME + 10;
sysPara->status.powerOffAfterInkOrSOLVEmptyAppending = 1;
LogInfo::setRunStatusText(tr("12.溶剂空,机器再次自动关机"));
ui->tabMainWindow->setRunStatus(tr("12.溶剂空,机器再次自动关机"));
ui->tabMainWindow->_on_pushButtonPowerOff_pressed(false);
}
}
else if(sysPara->RFIDPara.InkRFIDCnt == MAX_INK_RFIDTIME)
{
if(!sysPara->status.powerOffAfterInkOrSOLVEmptyAppending){
sysPara->RFIDPara.InkRFIDCnt = MAX_INK_RFIDTIME + 10;
sysPara->status.powerOffAfterInkOrSOLVEmptyAppending = 1;
LogInfo::setRunStatusText(tr("21.没有使用原厂墨水耗材,机器自动关机"));
ui->tabMainWindow->setRunStatus(tr("21.没有使用原厂墨水耗材,机器自动关机"));
ui->tabMainWindow->_on_pushButtonPowerOff_pressed(false);
}
}
else if(sysPara->RFIDPara.SOLVRFIDCnt == MAX_SOLV_RFIDTIME)
{
if(!sysPara->status.powerOffAfterInkOrSOLVEmptyAppending){
sysPara->RFIDPara.SOLVRFIDCnt = MAX_SOLV_RFIDTIME + 10;
sysPara->status.powerOffAfterInkOrSOLVEmptyAppending = 1;
LogInfo::setRunStatusText(tr("22.没有使用原厂溶剂耗材,机器自动关机"));
ui->tabMainWindow->setRunStatus(tr("22.没有使用原厂溶剂耗材,机器自动关机"));
ui->tabMainWindow->_on_pushButtonPowerOff_pressed(false);
}
}
else if(sysPara->RFIDPara.InkRFIDCnt >= (MAX_INK_RFIDTIME + 130))
{
if(!sysPara->status.powerOffAfterInkOrSOLVEmptyAppending){
sysPara->RFIDPara.InkRFIDCnt = MAX_INK_RFIDTIME + 10;
sysPara->status.powerOffAfterInkOrSOLVEmptyAppending = 1;
LogInfo::setRunStatusText(tr("23.没有使用原厂墨水耗材,机器再次自动关机"));
ui->tabMainWindow->setRunStatus(tr("23.没有使用原厂墨水耗材,机器再次自动关机"));
ui->tabMainWindow->_on_pushButtonPowerOff_pressed(false);
}
}
else if(sysPara->RFIDPara.SOLVRFIDCnt >= (MAX_SOLV_RFIDTIME + 130))
{
if(!sysPara->status.powerOffAfterInkOrSOLVEmptyAppending){
sysPara->RFIDPara.SOLVRFIDCnt = MAX_SOLV_RFIDTIME + 10;
sysPara->status.powerOffAfterInkOrSOLVEmptyAppending = 1;
LogInfo::setRunStatusText(tr("24.没有使用原厂溶剂耗材,机器再次自动关机"));
ui->tabMainWindow->setRunStatus(tr("24.没有使用原厂溶剂耗材,机器再次自动关机"));
ui->tabMainWindow->_on_pushButtonPowerOff_pressed(false);
}
}
#endif
static bool read_flag = false;
if(widget == ui->tabMainWindow) {
ui->tabMainWindow->updateSysStatusToUI();
}
else if(widget == ui->tabTriggerMode){
ui->tabTriggerMode->updateSysStatusToUI();
if(sysPara->status.build_dat.builTime ==0) sysPara->devOp->readbuilDat();
else
{
QString strFPGADate;
if(sysPara->status.build_dat.year!=0xff && sysPara->status.build_dat.month!=0xff && sysPara->status.build_dat.day!=0xff)
{
strFPGADate = QString("(%1-%2-%3)").arg(sysPara->status.build_dat.year).arg(sysPara->status.build_dat.month).arg(sysPara->status.build_dat.day);
}
if(sysPara->status.flagOfNo67FPGA && sysPara->para.flagOfFastMode)
ui->tabTriggerMode->setBuildTime(QString(" No66") + "_" + strFPGADate);
else if(sysPara->status.flagOfNo67FPGA && !sysPara->para.flagOfFastMode)
ui->tabTriggerMode->setBuildTime(QString(" No67") + "_" +strFPGADate);
else
ui->tabTriggerMode->setBuildTime(QString(" No%1").arg(sysPara->status.build_dat.builTime) + "_"+ strFPGADate);
}
}
else if(widget == ui->tabPrintSetting)
{
ui->tabPrintSetting->updateSysStatusToUI();
if(!read_flag)
{
emit sendPicScene(ui->tabMainWindow->getPicScene());
}
read_flag = true;
bool flag = ui->tabPrintSetting->getCurrentTabWidget();
if(flag){
myInputMethod->flagOfSecMiInput = true;
}else{
myInputMethod->flagOfSecMiInput = false;
}
}
else if(widget == ui->tabSystemSetting){
ui->tabSystemSetting->updateSysStatusToUI();
}
else if(widget == ui->tabSystemManage){
ui->tabSystemManage->updateSysStatusToUI();
}
else if(widget == ui->tabOtherInfo){
ui->tabOtherInfo->updateSysStatusToUI();
}
else if(widget == ui->tabNetworkManager){
if(!sysPara->status.bLanConfigManual)
{
ui->tabNetworkManager->updateSysStatusToUI();
}
}
if(widget != ui->tabPrintSetting)
{
read_flag = false;
myInputMethod->flagOfSecMiInput = false;
}
// 20140306
static int last_lesslen_warn=0,lesslen_cnt=0;
if(sysPara->status.lesslen_warn && (sysPara->para.printTriggerMode != PRINT_TRIGGER_TIME))
{
if(last_lesslen_warn==0)
{
last_lesslen_warn =lesslen_cnt;
if(lesslen_cnt<60)lesslen_cnt +=6;
if(lesslen_cnt>40) sysPara->devOp->resumeFault();
if(sysPara->para.speedoverPaushPrint) {
ui->tabMainWindow->on_pushButtonPausePrint_pressed();// 2014-03-19
emit OnSpeedOver(2);//QMessageBox::warning(NULL,tr("警告"),tr("喷印速度过快！无法喷印完全，自动暂停喷印!!!"));
ui->tabMainWindow->setRunStatus(tr("喷印速度过快！无法喷印完全，自动暂停喷印!!!"));
}
else {
emit OnSpeedOver(1);//QMessageBox::warning(NULL,tr("警告"),tr("喷印速度过快！无法喷印完全!!!"));
ui->tabMainWindow->setRunStatus(tr("喷印速度过快！无法喷印完全!!!"));
}
}
}
else { last_lesslen_warn=0;lesslen_cnt=30;}
if(last_lesslen_warn) last_lesslen_warn--;
}
if(pulse_100ms){
detectAndcontrolReclaimTank(); //控制回收槽
}
/*---------------------------------处理警告--------------------------------------------*/
if(pulse_1s){
if(sysPara->para.gearPumpEnable && sysPara->status.selfCheckDone && gearPumpRunNormalFlag)
{
if((sysPara->status.PRESSURE < (sysPara->para.pressure -8)) || (sysPara->status.PRESSURE > (sysPara->para.pressure +8)))
{
LogInfo::setRunStatusText(tr("压力波动超过设定的5个值."));
}
}
/*-------移植RFID卡功能模块之前的代码
if(sysPara->status.statWarn &WARN_STATUS_INK_WARN )
{
if(sysPara->status.InkOrSOLVEmptyCnt<MAX_INK_SOLV_EMTYTIME) sysPara->status.InkOrSOLVEmptyCnt=t1.elapsed()/1000 ;//
}
else {
sysPara->status.InkOrSOLVEmptyCnt=0;
t1.start();//
}*/
#ifdef __RFID_CARD
if(sysPara->status.statWarn & WARN_STATUS_INK_WARN )
{
if(sysPara->RFIDPara.InkEmptyCnt < MAX_INK_EMTYTIME){
if(sysPara->RFIDPara.InkEmptyCnt == 0){
ui->tabMainWindow->setRunStatus(tr("1.请添加墨水,否则机器将在24小时后自动关机!"));
LogInfo::setRunStatusText(tr("1.请添加墨水,否则机器将在24小时后自动关机!"));
}
sysPara->RFIDPara.InkEmptyCnt = t1.elapsed()/1000 ;
if(sysPara->RFIDPara.InkEmptyCnt % 1800 == 0){
unsigned int InkEndTime;
InkEndTime = MAX_INK_EMTYTIME - sysPara->RFIDPara.InkEmptyCnt;
if(InkEndTime > 3600){
InkEndTime = InkEndTime / 3600;
ui->tabMainWindow->setRunStatus(tr("2.请添加墨水,否则机器将在%1小时后自动关机!").arg(InkEndTime));
LogInfo::setRunStatusText(tr("2.请添加墨水,否则机器将在%1小时后自动关机!").arg(InkEndTime));
}
else if(InkEndTime > 60){
InkEndTime = InkEndTime / 60;
ui->tabMainWindow->setRunStatus(tr("3.请添加墨水,否则机器将在%1分钟后自动关机!").arg(InkEndTime));
LogInfo::setRunStatusText(tr("3.请添加墨水,否则机器将在%1分钟后自动关机!").arg(InkEndTime));
}
}
}
else if(sysPara->RFIDPara.InkEmptyCnt >= (MAX_INK_EMTYTIME + 10)){
if(sysPara->RFIDPara.InkEmptyCnt == (MAX_INK_EMTYTIME + 10)){
ui->tabMainWindow->setRunStatus(tr("4.请添加墨水,否则机器将在2分钟后自动关机!"));
LogInfo::setRunStatusText(tr("4.请添加墨水,否则机器将在2分钟后自动关机!"));
}
sysPara->RFIDPara.InkEmptyCnt++;
}
}
else {
sysPara->RFIDPara.InkEmptyCnt = 0;
t1.start();
}
if(sysPara->status.statWarn & WARN_STATUS_SOLV_WARN){
if(sysPara->RFIDPara.SOLVEmptyCnt < MAX_SOLV_EMTYTIME){
if(sysPara->RFIDPara.SOLVEmptyCnt == 0){
ui->tabMainWindow->setRunStatus(tr("5.请添加溶剂,否则机器将在6小时后自动关机!"));
LogInfo::setRunStatusText(tr("5.请添加溶剂,否则机器将在6小时后自动关机!"));
}
sysPara->RFIDPara.SOLVEmptyCnt++;
if(sysPara->RFIDPara.SOLVEmptyCnt % 1800 == 0){
unsigned int SolvEndTime;
SolvEndTime = MAX_SOLV_EMTYTIME - sysPara->RFIDPara.SOLVEmptyCnt;
if(SolvEndTime > 3600){
SolvEndTime = SolvEndTime / 3600;
ui->tabMainWindow->setRunStatus(tr("6.请添加溶剂,否则机器将在%1小时后自动关机!").arg(SolvEndTime));
LogInfo::setRunStatusText(tr("6.请添加溶剂,否则机器将在%1小时后自动关机!").arg(SolvEndTime));
}
else if(SolvEndTime > 60){
SolvEndTime = SolvEndTime / 60;
ui->tabMainWindow->setRunStatus(tr("7.请添加溶剂,否则机器将在%1分钟后自动关机!").arg(SolvEndTime));
LogInfo::setRunStatusText(tr("7.请添加溶剂,否则机器将在%1分钟后自动关机!").arg(SolvEndTime));
}
}
}
else if(sysPara->RFIDPara.SOLVEmptyCnt >= (MAX_SOLV_EMTYTIME + 10)){
if(sysPara->RFIDPara.SOLVEmptyCnt == (MAX_SOLV_EMTYTIME + 10)){
ui->tabMainWindow->setRunStatus(tr("8.请添加溶剂,否则机器将在2分钟后自动关机!"));
LogInfo::setRunStatusText(tr("8.请添加溶剂,否则机器将在2分钟后自动关机!"));
}
sysPara->RFIDPara.SOLVEmptyCnt++;
}
}
else{
sysPara->RFIDPara.SOLVEmptyCnt = 0;
}
if(sysPara->RFIDPara.PrintInkDots >= MAX_INK_DOTS){
if(sysPara->RFIDPara.InkRFIDCnt < MAX_INK_RFIDTIME){
if(sysPara->RFIDPara.InkRFIDCnt == 0){
sysPara->saveRFIDPara();
msgtest->setText(tr("13.请刷墨水卡,请使用原厂墨水耗材,否则机器将在24小时后自动关机!"));
msgtest->show();
ui->tabMainWindow->setRunStatus(tr("13.请刷墨水卡,请使用原厂墨水耗材,否则机器将在24小时后自动关机!"));
LogInfo::setRunStatusText(tr("13.请刷墨水卡,请使用原厂墨水耗材,否则机器将在24小时后自动关机!"));
}
sysPara->RFIDPara.InkRFIDCnt++;
if(sysPara->RFIDPara.InkRFIDCnt % 1800 == 0){
unsigned int InkEndRFID;
InkEndRFID = MAX_INK_RFIDTIME - sysPara->RFIDPara.InkRFIDCnt;
if(InkEndRFID > 3600){
InkEndRFID = InkEndRFID / 3600;
ui->tabMainWindow->setRunStatus(tr("14.请刷墨水卡,请使用原厂墨水耗材,否则机器将在%1小时后自动关机!").arg(InkEndRFID));
LogInfo::setRunStatusText(tr("14.请刷墨水卡,请使用原厂墨水耗材,否则机器将在%1小时后自动关机!").arg(InkEndRFID));
}
else if(InkEndRFID > 60){
InkEndRFID = InkEndRFID / 60;
ui->tabMainWindow->setRunStatus(tr("15.请刷墨水卡,请使用原厂墨水耗材,否则机器将在%1分钟后自动关机!").arg(InkEndRFID));
LogInfo::setRunStatusText(tr("15.请刷墨水卡,请使用原厂墨水耗材,否则机器将在%1分钟后自动关机!").arg(InkEndRFID));
}
}
}
else if(sysPara->RFIDPara.InkRFIDCnt >= (MAX_INK_RFIDTIME + 10)){
if(sysPara->RFIDPara.InkRFIDCnt == (MAX_INK_RFIDTIME + 10)){
msgtest->setText(tr("16.请刷墨水卡水,请使用原厂墨水耗材,否则机器将在2分钟后自动关机!"));
msgtest->show();
ui->tabMainWindow->setRunStatus(tr("16.请刷墨水卡水,请使用原厂墨水耗材,否则机器将在2分钟后自动关机!"));
LogInfo::setRunStatusText(tr("16.请刷墨水卡水,请使用原厂墨水耗材,否则机器将在2分钟后自动关机!"));
}
sysPara->RFIDPara.InkRFIDCnt++;
}
}
else{
sysPara->RFIDPara.InkRFIDCnt = 0;
}
if(sysPara->RFIDPara.solventNumber >= MAX_SOLV_OPENNUM){
if(sysPara->RFIDPara.SOLVRFIDCnt < MAX_SOLV_RFIDTIME){
if(sysPara->RFIDPara.SOLVRFIDCnt == 0){
sysPara->saveRFIDPara();
msgtest->setText(tr("17.请刷溶剂卡,请使用原厂溶剂耗材,否则机器将在2小时后自动关机!"));
msgtest->show();
ui->tabMainWindow->setRunStatus(tr("17.请刷溶剂卡,请使用原厂溶剂耗材,否则机器将在2小时后自动关机!"));
LogInfo::setRunStatusText(tr("17.请刷溶剂卡,请使用原厂溶剂耗材,否则机器将在2小时后自动关机!"));
}
sysPara->RFIDPara.SOLVRFIDCnt++;
if(sysPara->RFIDPara.SOLVRFIDCnt % 1800 == 0){
unsigned int SolvEndRFID;
SolvEndRFID = MAX_SOLV_RFIDTIME - sysPara->RFIDPara.SOLVRFIDCnt;
if(SolvEndRFID > 3600){
SolvEndRFID = SolvEndRFID / 3600;
ui->tabMainWindow->setRunStatus(tr("18.请刷溶剂卡,请使用原厂溶剂耗材,否则机器将在%1小时后自动关机!").arg(SolvEndRFID));
LogInfo::setRunStatusText(tr("18.请刷溶剂卡,请使用原厂溶剂耗材,否则机器将在%1小时后自动关机!").arg(SolvEndRFID));
}
else if(SolvEndRFID > 60){
SolvEndRFID = SolvEndRFID / 60;
ui->tabMainWindow->setRunStatus(tr("19.请刷溶剂卡,请使用原厂溶剂耗材,否则机器将在%1分钟后自动关机!").arg(SolvEndRFID));
LogInfo::setRunStatusText(tr("19.请刷溶剂卡,请使用原厂溶剂耗材,否则机器将在%1分钟后自动关机!").arg(SolvEndRFID));
}
}
}
else if(sysPara->RFIDPara.SOLVRFIDCnt >= (MAX_SOLV_RFIDTIME + 10)){
if(sysPara->RFIDPara.SOLVRFIDCnt == (MAX_SOLV_RFIDTIME + 10)){
msgtest->setText(tr("20.请刷溶剂卡,请使用原厂溶剂耗材,否则机器将在2分钟后自动关机!"));
msgtest->show();
ui->tabMainWindow->setRunStatus(tr("20.请刷溶剂卡,请使用原厂溶剂耗材,否则机器将在2分钟后自动关机!"));
LogInfo::setRunStatusText(tr("20.请刷溶剂卡,请使用原厂溶剂耗材,否则机器将在2分钟后自动关机!"));
}
sysPara->RFIDPara.SOLVRFIDCnt++;
}
}
else{
sysPara->RFIDPara.SOLVRFIDCnt = 0;
}
#endif
static bool resumeFlag = false;
if(lostCommuFlag || ui->tabMainWindow->updatePhaseIndicatorLight() || (sysPara->status.statWarn & (WARN_STATUS_POWER_MON|WARN_STATUS_INK_WARN|WARN_STATUS_SUMP_WARN
|WARN_STATUS_SOLV_WARN|WARN_STATUS_POWER_MON)) || (sysPara->status.gearPumpRunStopFlag && pushButtonStartFlag) ||sysPara->status.lastHighVoltageFault)
{ //updatePhaseIndicatorLight（）务必放前面
sysPara->status.beeperOnFlag = true;
if(sysPara->status.gearPumpRunStopFlag && pushButtonStartFlag)
{
ui->tabMainWindow->setRunStatus(tr("压力泄漏或压力传感器故障!"));
}
if(!resumeFlag)
{
resumeFlag = true;
pulse_4s = 0;
if(!sysPara->status.lastHighVoltageFault)
{
ui->tabMainWindow->onLabelFaultRusumePressed();
}
}
}
else {
sysPara->status.beeperOnFlag = false;
sysPara->devOp->controlBeeper(false);
if(pulse_4s >= 20)
{
pulse_4s = 0;
resumeFlag = false;
}
}
if(sysPara->status.beeperOnFlag){ //报警会时有时无
sysPara->devOp->controlBeeper(!sysPara->devOp->isBeeperEnable());
}
if((sysPara->status.statWarn & (WARN_STATUS_POWER_MON))
||sysPara->status.lastwarmInkPump||sysPara->status.lastwarmInkPump||sysPara->status.mainInkPumpError
||sysPara->status.compressPumpError||sysPara->status.lastPhaseFault||sysPara->status.lastRecycleWarn||sysPara->status.lastHighVoltageFault)
{ //2013-12-12故障报警灯 杨
sysPara->status.RedLightOnFlag = true;
}
else {
sysPara->status.RedLightOnFlag = false;
sysPara->devOp->controlRedLight(false);
//sysPara->devOp->controlRedLight(true);
}
if(sysPara->status.RedLightOnFlag){ //报警会时有时无
sysPara->devOp->controlRedLight(!sysPara->devOp->isRedLightEnable());
}
if((sysPara->status.statWarn & (WARN_STATUS_INK_WARN|WARN_STATUS_SOLV_WARN |WARN_STATUS_RECYCLE_FAULT|WARN_STATUS_SUMP_WARN))
&& !sysPara->status.RedLightOnFlag){
//if(!sysPara->status.RedLightOnFlag){
sysPara->status.YellowLightOnFlag = true;
}
else {
sysPara->status.YellowLightOnFlag = false;
sysPara->devOp->controlYellowLight(false);
//sysPara->devOp->controlYellowLight(true);
}
if(sysPara->status.YellowLightOnFlag){ //报警会时有时无
sysPara->devOp->controlYellowLight(!sysPara->devOp->isYellowLightEnable());
}
if(sysPara->status.waitHightVolOff>0){
sysPara->status.waitHightVolOff--;
if(sysPara->status.waitHightVolOff==0){
sysPara->devOp->highVoltageCtrl(0);
ui->tabMainWindow->setRunStatus(tr("停止打印，自动关闭高压."));
}
}
}// 1s
#ifdef WARNING
static int pre_pressed=0,pre_hvcurrent=0,press_err_cnt=0;
if(pulse_1s)
{
if((pre_pressed > sysPara->status.PRESSURE+70))
{
if(++press_err_cnt>3)
{
LogInfo::setRunStatusText(tr("压力异常:上次压力值%1,当前压力值%2").arg(pre_pressed).arg(sysPara->status.PRESSURE));
}
}
else
{
press_err_cnt = 0;
}
pre_pressed = sysPara->status.PRESSURE;
}
if(pulse_100ms)
{
if(pre_hvcurrent>150 && ( sysPara->status.HV_DETOUT> pre_hvcurrent+20) && (sysPara->status.waitHightVolOn==8 || sysPara->status.waitHightVolOff==1) && sysPara->status.isPrinting )
pre_hvcurrent = sysPara->status.HV_DETOUT;
if(sysPara->status.waitHightVolOn<8)sysPara->status.waitHightVolOn++;
if(sysPara->status.isPrinting==0) sysPara->status.waitHightVolOn=0;
}
#endif
if(sysPara->devOp->color_flag ==3){
sysPara->devOp->color_flag = 0;
pulse_30s = 0;
}
else if(pulse_1s && sysPara->para.gearPumpEnable && sysPara->status.selfCheckDone
&& (!sysPara->status.statWarn) && !sysPara->status.powerOffAppending){
if((!sysPara->para.flagOfReclaimPumEnable && sysPara->status.gearPumpRunSpeed <= 2000)
||(sysPara->para.flagOfReclaimPumEnable && sysPara->status.gearPumpRunSpeed <= sysPara->para.gearPumpSpeedAlarm))
{
pulse_30s = 0;
}
else{
pulse_30s++;
if(pulse_30s >= 5){
if((sysPara->status.gearPumpRunSpeed >= 3000)||(sysPara->devOp->color_flag == 2)
||(sysPara->para.flagOfReclaimPumEnable && sysPara->status.gearPumpRunSpeed > sysPara->para.gearPumpSpeedAlarm))
{
sysPara->status.flagOfSpeedAlarm = true;
sysPara->devOp->color_flag = 2;
if(pulse_30s % 500 == 0){
LogInfo::setRunStatusText(tr("齿轮泵转速过高，请立即停机并联系供应商!"));
qDebug()<<"齿轮泵转速过高，请立即停机并联系供应商!";
}
ui->tabMainWindow->setRunStatus(tr("齿轮泵转速过高，请立即停机并联系供应商!"));
sysPara->devOp->controlRedLight(true);
if(sysPara->status.isPrinting)
ui->tabMainWindow->on_pushButtonStopPrint_pressed();
}
else{
sysPara->devOp->color_flag = 1;
if(pulse_30s % 500 == 0){
LogInfo::setRunStatusText(tr("齿轮泵转速过高，请清理过滤器或者检查是否泄露!"));
qDebug()<<"齿轮泵转速过高，请清理过滤器或者检查是否泄露!";
}
ui->tabMainWindow->setRunStatus(tr("齿轮泵转速过高，请清理过滤器或者检查是否泄露!"));
sysPara->devOp->controlYellowLight(true);
}
}
if(pulse_30s % 10 == 0)
qDebug()<<"粘度: "<<QString::number(sysPara->status.viscosity);
}
}
else if(sysPara->status.statWarn & 0xFE){
sysPara->devOp->color_flag = 3;
pulse_30s = 0;
}
}
//测试代码,发布模式自动忽略
}
void InkJetPrinter::autoControlHeater(){
//100ms
static int tempDly=1830;
if(tempDly) tempDly--;
if(tempDly>=1800)
{
if(tempDly==1800)
{
sysPara->status.indoorTemperature = sysPara->status.TEMP_ADIN/4;
sysPara->devOp->pumpValveCtrl(1);
if(sysPara->status.indoorTemperature-35>0)
ui->tabSystemSetting->updateViscosityAdjust((sysPara->status.indoorTemperature-35));
else
ui->tabSystemSetting->updateViscosityAdjust(0);
}
return;
}
if(sysPara->status.TEMP_ADIN/4 < sysPara->para.temperature && sysPara->status.heaterONTimeCnt < MAX_HEATER_TIME){
if(tempDly==0) sysPara->status.heaterONTimeCnt ++;
if(!sysPara->devOp->isHearterEnable())
sysPara->devOp->controlHeater(true);
if(sysPara->status.heaterONTimeCnt == MAX_HEATER_TIME){
LogInfo::setRunStatusText(tr("警告:加热器长时间无法达到预期温度，故障或设置错误！"));
ui->tabMainWindow->setRunStatus("加热器长时间无法达到预期温度，故障或设置错误！");//20150105 no check
sysPara->devOp->controlHeater(false);
}
}
else {
if(sysPara->status.heaterONTimeCnt < MAX_HEATER_TIME)
{
sysPara->status.heaterONTimeCnt = 0;
}
if(sysPara->devOp->isHearterEnable())
sysPara->devOp->controlHeater(false);
}
}
void InkJetPrinter::cnt1GroupCheck(void)
{
#ifdef COUNTER1_BY_GROUP /* 分段计米 */
static unsigned char lastGroupRunningIndex = 0;
if(sysPara->para.cnt1ByGroupEnalbe)
{
sysPara->devOp->ReadCnt1GroupStatus();
if(lastGroupRunningIndex == sysPara->status.cnt1GroupRunningIndex)
return;
lastGroupRunningIndex = sysPara->status.cnt1GroupRunningIndex;
emit updateCnt1GroupDisp(1);
}
#endif
}
void InkJetPrinter::cnt2GroupCheck(void)
{
#ifdef COUNTER2_BY_GROUP /* 分段计米2 */
static unsigned char lastGroupRunningIndex = 0;
if(sysPara->para.cnt2ByGroupEnalbe)
{
sysPara->devOp->ReadCnt2GroupStatus();
if(lastGroupRunningIndex == sysPara->status.cnt2GroupRunningIndex)
return;
lastGroupRunningIndex = sysPara->status.cnt2GroupRunningIndex;
emit updateCnt2GroupDisp(1);
}
#endif
}
void InkJetPrinter::autoControlValvePump(void)
{
if(sysPara){
if(!sysPara->status.isPumpValveControledByHand){
/*---------------------------------供墨阀--------------------------------------------*/
bool enableFlag = ((sysPara->status.statWarn & WARN_STATUS_INK_SWINT)
|| (sysPara->status.lastRecycleWarn && sysPara->para.RecycleWarnAction) // 2017.8.15版本回收故障关供墨阀问题
|| ( sysPara->status.HVFaultCloseEn ) //高压故障关闭墨线
)?false:true; //墨线开关
// if(enableFlag != sysPara->devOp->isInkValveOpen()){
// sysPara->devOp->controlInkValve(enableFlag); //供墨阀
// if(enableFlag == false){ //关闭
// sysPara->status.cycleValveOpenCntAfterSWintOff = MAX_CYCLEVALVE_OPEN_TIME_AFTER_SWITN_OFF;
// }
// }
if(enableFlag != sysPara->devOp->isInkValveOpen()){
if(enableFlag == false) { //关闭供墨阀的顺序 先开循环阀后关闭供墨阀
//#ifdef __AIR_RELEASE_OLD__ // 旧管路关闭墨线后 开粘度泵和循环阀一段时间
if (sysPara->status.cycleValveOpenCntAfterSWintOff == 0) {
sysPara->status.cycleValveOpenCntAfterSWintOff = MAX_CYCLEVALVE_OPEN_TIME_AFTER_SWITN_OFF;
}
if (sysPara->status.cycleValveOpenCntAfterSWintOff < 60) { //在准备关闭循环阀的时候关闭供墨阀
sysPara->devOp->controlInkValve(enableFlag); //关供墨
sysPara->devOp->controlInkValvePWM(enableFlag); //关供墨
}
//#else
// // 新管路直接关闭墨线
// sysPara->devOp->controlInkValve(enableFlag); //关供墨
//#endif
}
else { //开供墨阀
if(!sysPara->devOp->isReclaimPumpOpen()) //开供墨阀之前要判断回收泵有没有开，没开就提前打开
{
sysPara->devOp->controlReclaimPump(true, false); // 回收泵开
}
if(!ui->tabMainWindow->m_2sFlag)
{
sysPara->devOp->controlInkValve(enableFlag);
sysPara->devOp->controlInkValvePWM(enableFlag);
}
}
}
/*----------------------------------循环阀-------------------------------------------*/
if(!sysPara->status.selfCheckDone || (sysPara->status.needPowerOffTimerout && sysPara->para.gearPumpEnable)){
// if(!sysPara->devOp->isCycleValveOpen()){ //循环阀 //定时开机循环时隔膜泵不开关循环阀
// sysPara->devOp->controlCycleValve(true);
// }
cycleValveRunForSelfCheck();
if(sysPara->status.needPowerOffTimerout)
{
if(sysPara->devOp->isMixValveOpen()) { //
sysPara->devOp->controlMixValve(false);
}
}
}
else {
if(sysPara->status.cycleValveOpenCntAfterSWintOff){ // 开循环阀
if(!sysPara->devOp->isCycleValveOpen()){
sysPara->devOp->controlCycleValve(true);
}
sysPara->status.cycleValveOpenCntAfterSWintOff --;
}
else if(sysPara->devOp->isCycleValveOpen()){ // 关循环阀
sysPara->devOp->controlCycleValve(false);
}
}
/*----------------------------------泄压阀-------------------------------------------*/
//=====================================================================================================
if(sysPara->status.PRESSURE - sysPara->para.pressure > MAX_PRESSURE_RELEASE_DIFF)
sysPara->status.pressureOverFlowCnt ++;
else
sysPara->status.pressureOverFlowCnt = 0;
if((
sysPara->status.releaseValveOpenApending ||
sysPara->status.pressureOverFlowCnt > 2
) //防止干扰和误动作
&& !sysPara->status.releaseValveDelayCnt)
{
if(!sysPara->devOp->isReleaseValveOpen())
{ //泄压阀
sysPara->devOp->controlReleaseValve(true);
}
sysPara->status.releaseValveDelayCnt = MAX_RELEASE_VALVE_DELAY_CNT;
sysPara->status.releaseValveOpenApending = true;
}
else
{
if(sysPara->devOp->isReleaseValveOpen())
{ //
//sysPara->devOp->controlReleaseValve(false);
}
if(sysPara->status.releaseValveDelayCnt)
sysPara->status.releaseValveDelayCnt --;
if(sysPara->status.PRESSURE < sysPara->para.pressure)
{
sysPara->status.releaseValveOpenApending = false;
if(sysPara->devOp->isReleaseValveOpen()){ sysPara->devOp->controlReleaseValve(false);
}
}
}
//=======================================================================
/*
if(sysPara->status.PRESSURE - sysPara->para.pressure > MAX_PRESSURE_RELEASE_DIFF)
sysPara->status.pressureOverFlowCnt ++;
else
sysPara->status.pressureOverFlowCnt = 0;
if((sysPara->status.releaseValveOpenApending ||
sysPara->status.pressureOverFlowCnt > 2) //防止干扰和误动作
&& !sysPara->status.releaseValveDelayCnt){
if(!sysPara->devOp->isReleaseValveOpen()){ //泄压阀
sysPara->devOp->controlReleaseValve(true);
}
sysPara->status.releaseValveDelayCnt = MAX_RELEASE_VALVE_DELAY_CNT;
sysPara->status.releaseValveOpenApending = true;
}
else {
if(sysPara->devOp->isReleaseValveOpen()){ //
sysPara->devOp->controlReleaseValve(false);
}
if(sysPara->status.releaseValveDelayCnt)
sysPara->status.releaseValveDelayCnt --;
if(sysPara->status.PRESSURE < sysPara->para.pressure){
sysPara->status.releaseValveOpenApending = false;
}
}
* */
/*----------------------------------混合阀-------------------------------------------*/
/*备忘内容：主板的型号与软件版本
`define JETV3 // EP4F15 V3板子
`define JETV32 // EP3C10 V4板子
`define JETV23 // V23板子 EP3C25
*/
/*-----------------------------------主墨泵------------------------------------------*/
if(PRODUCT_VERSION(sysPara->status.fpgaVersionNum) == JETV3 || PRODUCT_VERSION(sysPara->status.fpgaVersionNum) >= JETV23 ){
//20170830修改主板硬件版本号，以便与主板硬件版本编号对应, V7主板编号为7
if(sysPara->status.warm_InkPump){
if(!sysPara->status.lastwarmInkPump){
if(!sysPara->para.gearPumpEnable)
{
LogInfo::setRunStatusText(tr("错误!!!!!!!!!!!主墨泵故障"));
ui->tabMainWindow->setRunStatus(tr("主墨泵故障!!!"));
sysPara->status.lastwarmInkPump = 1;
}
}
}
}
else
{
if(sysPara->status.SEPTAL_POSITION < (sysPara->para.septalPostion - DIFF_SEPTAL_POSITION))
sysPara->status.septalPositionOverFlowCnt ++;
else
sysPara->status.septalPositionOverFlowCnt = 0;
if(sysPara->status.septalPositionOverFlowCnt > 2 && !sysPara->status.mainInkPumpError){ //主墨泵
if(!sysPara->devOp->isMainInkPumpOpen()){
sysPara->devOp->controlMainInkPump(true);
sysPara->status.mainInkPumpRunTmCnt = 0;
/*备忘内容：主板的型号与软件版本
`define JETV3 // EP4F15 V3板子
`define JETV32 // EP3C10 V4板子
`define JETV23 // V23板子 EP3C25
*/
/*-----------------------------------老管路的溶剂随主墨泵一起动作---------------------------*/
if(sysPara->status.selfCheckDone && !sysPara->para.mixValveisNewVersion && PRODUCT_VERSION(sysPara->status.fpgaVersionNum) == JETV1){
if(sysPara->devOp->isMixValveOpen())
checkMixValveClose();
else
checkMixValveOpen();
}
/*--------------------------------------------------------------------------------------*/
}
else if(sysPara->status.selfCheckDone){
if(sysPara->status.mainInkPumpRunTmCnt < MAX_MAIN_INK_PUMP_RUN_TIME){ //
sysPara->status.mainInkPumpRunTmCnt ++;
}
else {
if(!sysPara->para.gearPumpEnable)
{
sysPara->status.mainInkPumpError = true;
sysPara->devOp->controlMainInkPump(false);
LogInfo::setRunStatusText(tr("错误!!!!!!!!!!!主墨泵故障"));
ui->tabMainWindow->setRunStatus(tr("主墨泵故障!!!"));
}
}
}
}
else if(sysPara->status.SEPTAL_POSITION > sysPara->para.septalPostion){
if(sysPara->devOp->isMainInkPumpOpen())
sysPara->devOp->controlMainInkPump(false);
}
}
/*-----------------------------------压缩机------------------------------------------*/
if((sysPara->para.pressure - sysPara->status.PRESSURE > MAX_PRESSURE_DIFF) && !sysPara->status.compressPumpError){ //压缩机
if(!sysPara->devOp->isCompressPumpOpen()){
sysPara->devOp->controlCompressPump(true);
sysPara->status.compressPumpRunTmCnt = 0;
}
else if(sysPara->status.selfCheckDone){
if(sysPara->status.compressPumpRunTmCnt < MAX_COMPRESS_PUMP_RUN_TIME){ //如果长时间开压缩机，考虑设备故障
sysPara->status.compressPumpRunTmCnt ++;
}
else {
sysPara->status.compressPumpError = true;
sysPara->devOp->controlCompressPump(false);
if(!sysPara->para.gearPumpEnable)
{
LogInfo::setRunStatusText(tr("错误!!!!!!!!!!!压缩机故障"));
ui->tabMainWindow->setRunStatus(tr("压缩机故障!!!"));
}
}
}
}
else if(sysPara->para.pressure <= sysPara->status.PRESSURE){ //压力到达预期的压力
if(sysPara->devOp->isCompressPumpOpen())
sysPara->devOp->controlCompressPump(false);
}
/*------------------------------------粘度泵,混合阀-----------------------------------------*/
if(!sysPara->status.selfCheckDone){
#ifdef __AIR_RELEASE_OLD__
// 开机自检过程, 粘度泵跟随循环阀动作
if ((sysPara->devOp->isCycleValveOpen() ^ sysPara->devOp->isViscosityPumpOpen()) && !sysPara->status.ink_Ctrl) {
sysPara->devOp->controlViscosityPump(sysPara->devOp->isCycleValveOpen());
}
#endif
}
/*-----------------------------每30s打开一次粘度泵以及相关处理--------------------------------------*/
else {
// static int viscosity_flag = 0;
static bool hasDetectedBellow = false; // 检测到下位灯
static bool hasDetectedTop = false; // 检测到上位灯
static int viscosity_low = 0; //统计粘度连续偏低10%次数
static unsigned char Mixing_valve_open = 0; //统计粘度连续偏高5%次数
static unsigned char viscosity_faulty_num = 0; //统计粘度连续偏高13%次数
static bool flag = 0;
if(sysPara->status.cycleValveOpenCntAfterSWintOff) { //关闭墨线的时候要提前开粘度泵
sysPara->status.viscosityDelayCnt = sysPara->para.viscosityPumpInterval*100 + 100;
}
++sysPara->status.viscosityDelayCnt;
int mixer_open_threshold = (105*sysPara->para.viscosity)/100;
int viscosity_faulty_threshold =(113*sysPara->para.viscosity)/100;
if(sysPara->status.viscosityDelayCnt >= sysPara->para.viscosityPumpInterval*100 && flag == 0)
{
flag=1;
if (!sysPara->devOp->isViscosityPumpOpen())
{
sysPara->devOp->controlViscosityPump(true);
viscosity_timer->start(10000);
qDebug()<<"粘度: "<<QString::number(sysPara->status.viscosity);
}
if((sysPara->status.viscosity >= 90*sysPara->para.viscosity/100) && (sysPara->status.viscosity <= mixer_open_threshold))
{
sysPara->status.viscosityFault = 0;
viscosity_low=0;
Mixing_valve_open = 0;
viscosity_faulty_num = 0;
}
if(sysPara->status.viscosity < 90*sysPara->para.viscosity/100)
{
viscosity_low++;
viscosity_faulty_num = 0;
Mixing_valve_open = 0;
}
if(sysPara->status.viscosity > mixer_open_threshold && sysPara->status.viscosity <= viscosity_faulty_threshold)
{
Mixing_valve_open++;
viscosity_low = 0;
viscosity_faulty_num = 0;
}
if(sysPara->status.viscosity > viscosity_faulty_threshold){
Mixing_valve_open++;
viscosity_faulty_num++;
viscosity_low = 0;
}
if((!sysPara->devOp->isMixValveOpen()) && (((Mixing_valve_open > 1) && (!sysPara->para.gearPumpEnable)) || ((Mixing_valve_open > 4) && sysPara->para.gearPumpEnable))) { //
sysPara->devOp->controlMixValve(true);
Mixing_valve_open = 0;
LogInfo::setRunStatusText(tr("添加溶剂:")+QString::number(sysPara->status.viscosity));
qDebug()<<"添加溶剂";
}
if(viscosity_low >= 60)
{
LogInfo::setRunStatusText(tr("警告!!!!!!!!!!!粘度值偏低")+QString::number(sysPara->status.viscosity));
qDebug()<<"粘度值偏低";
sysPara->status.viscosityFault = 2;
}
if(viscosity_faulty_num >= 5)
{
LogInfo::setRunStatusText(tr("错误!!!!!!!!!!!粘度偏大故障")+QString::number(sysPara->status.viscosity));
qDebug()<<"粘度偏大故障";
sysPara->status.viscosityFault = 1;
}
}
if((sysPara->status.viscosityDelayCnt >= (sysPara->para.viscosityPumpInterval*100+120)) && flag==1)
{
if(sysPara->devOp->isMixValveOpen()) {
sysPara->devOp->controlMixValve(false);
}
}
if((sysPara->status.viscosityDelayCnt >= (sysPara->para.viscosityPumpInterval*100+130)) && flag==1)
{
if (sysPara->devOp->isViscosityPumpOpen()) {
sysPara->devOp->controlViscosityPump(false);
}
sysPara->status.viscosityDelayCnt = 0;
flag=0;
}
if(sysPara->status.statWarn & WARN_STATUS_VISCOTITY_MEASURE_READY){ //上位灯检测标志位
viscosity_timer->stop();
}
if(sysPara->status.viscosityDelayCnt < sysPara->para.viscosityPumpInterval*100) {
static int detectBelow = 0;
if (++detectBelow%400 == 0) {
if(sysPara->status.statWarn & WARN_STATUS_VISCOTITY_MEASURE_READY)
{
if(sysPara->status.rWarnViscoReady>=15){
sysPara->status.viscosityFault = 1;
sysPara->status.viscosity=0;
if(!firstTime)
qDebug()<<"错误!粘度计下位灯故障."+QString::number(sysPara->status.viscosity);
// LogInfo::setRunStatusText(tr("错误!粘度计下位灯故障.")+QString::number(sysPara->status.viscosity));
hasDetectedBellow = true;
}
else sysPara->status.rWarnViscoReady++;
}
else {
sysPara->status.rWarnViscoReady = 0;
sysPara->status.viscosityFault = 0;
}
}
}
if(hasDetectedBellow && hasDetectedTop)
{
if(sysPara->devOp->isMixValveOpen()) { //
sysPara->devOp->controlMixValve(false); //如果检测不到上下位灯就关掉混合阀
}
}
if(sysPara->status.viscosityFault==0)
{
hasDetectedBellow = false;
hasDetectedTop = false;
}
}
/*-----------------------------------回收泵------------------------------------------*/
if(!sysPara->status.autoCtlReclaimAfterSWintOff)
{
if(!sysPara->devOp->isReclaimPumpOpen() ){ //回收泵
// ui->tabMainWindow->setRunStatus(tr("全速回收泵!!!"));
sysPara->status.reclaimPumpFullSpeedCnt = 0;
sysPara->devOp->controlReclaimPump(true,true); //先全速，后降速
}
else if(sysPara->status.reclaimPumpFullSpeedCnt <= RECLAIM_PUMP_FULL_SPEED_CNT){
sysPara->status.reclaimPumpFullSpeedCnt ++;
if(sysPara->status.reclaimPumpFullSpeedCnt == RECLAIM_PUMP_FULL_SPEED_CNT){ //降速
// ui->tabMainWindow->setRunStatus(tr("降速回收泵!!!"));
sysPara->devOp->controlReclaimPump(true,false);
}
}
}
/*-----------------------------------------------------------------------------*/
}
}
}
//==========================
// 放在10ms的定时器运行,但和粘度泵工作周期一致
void InkJetPrinter::checkMixValveOpen(){
//混合阀
if(sysPara->status.viscosity>40000){
sysPara->status.viscosityMaxFaultCnt++;
if(sysPara->status.viscosityMaxFaultCnt>5)
{
sysPara->status.viscosityMaxFaultCnt=0;
if(sysPara->status.viscosityFault ==0 ) LogInfo::setRunStatusText(tr("粘度检测异常,粘度值太大!!!"));
sysPara->status.viscosityFault=1;
}
sysPara->status.viscosity=0;
}
int mixer_open_threshold = MAX_VISICOSITY_RATIO*sysPara->para.viscosity/100;
int mixer_open_threshold_high = (MAX_VISICOSITY_RATIO + 11)*sysPara->para.viscosity/100;
if(sysPara->status.viscosity > mixer_open_threshold)
{// 粘度值高报警： 条件＠高于设定值的1.05，时间：120个测量周期
sysPara->status.visocityValueOverflowNum ++;
if(sysPara->status.visocityValueOverflowNum >= (MAX_VISICOSITY_VALUE_OVERFLOW_NUM/3)){
if((sysPara->status.viscosity >= mixer_open_threshold_high)//超出太多加得快，否则隔三下，加一下
|| ((sysPara->status.visocityValueOverflowNum % 3) == 0)){
if(!sysPara->devOp->isMixValveOpen()){ //
sysPara->devOp->controlMixValve(true);
LogInfo::setRunStatusText(tr("混合阀打开2:")+QString::number(sysPara->status.viscosity));
}
}
}
if(sysPara->status.visocityValueOverflowNum > MAX_ALLOW_VISICOSITY_OVERFLOW_NUM){
if(sysPara->status.viscosityFault ==0 )
LogInfo::setRunStatusText(tr("错误!!!!!!!!!!!粘度偏大故障"));
sysPara->status.viscosityFault = 1;
}
}
else if(sysPara->status.viscosity > 90*sysPara->para.viscosity/100){
// 粘度值正常
sysPara->status.visocityValueOverflowNum = 0;
sysPara->status.viscosityFault = 0; // 20160922 粘度低报警不能复位问题
}
else {// 粘度值低报警： 条件＠ 低于设定值的0.9，时间：60个测量周期
sysPara->status.visocityValueOverflowNum ++;
if(sysPara->status.visocityValueOverflowNum > (MAX_ALLOW_VISICOSITY_OVERFLOW_NUM/2)){
if(sysPara->status.viscosityFault ==0 ) LogInfo::setRunStatusText(tr("警告!!!!!!!!!!!粘度值偏低"));
sysPara->status.viscosityFault = 2;
sysPara->status.visocityValueOverflowNum=MAX_ALLOW_VISICOSITY_OVERFLOW_NUM-10;
}
}
}
void InkJetPrinter::checkMixValveClose(){
if(sysPara->devOp->isMixValveOpen()){ // 关闭混合阀
sysPara->devOp->controlMixValve(false);
}
}
//在开机自检过程中交替打开和关闭循环阀
void InkJetPrinter::cycleValveRunForSelfCheck(){
static int cycleValveOpenCnt = 0;
if (++cycleValveOpenCnt%300 > 150) {
if(!sysPara->devOp->isCycleValveOpen()){ //循环阀 开
sysPara->devOp->controlCycleValve(true);
}
}
else {
if(sysPara->devOp->isCycleValveOpen()){ //循环阀 关
sysPara->devOp->controlCycleValve(false);
}
}
}
void InkJetPrinter::onReclaimTankBlock(){
if(sysPara){
ui->tabMainWindow->enableReclaimCtrlButton(true);
sysPara->status.reclaimTankBlockedAppending = true;
if(sysPara->status.powerOffAppending && sysPara->status.powerOffAfterPhaseFaultAppending)
ui->tabMainWindow->checkForPowerOff();
sysPara->status.powerOffAppending = false; //如果有关机动作，终止
}
}
/*
*
* 控制回收槽
*
* */
void InkJetPrinter::detectAndcontrolReclaimTank(){
sysPara->status.currReclaimTankPos =10*sysPara->status.curr_reclaimTankTime;
sysPara->status.reclaimTankBlockedAppending =0;
//qDebug()<<sysPara->status.reclaimTankstatus;
if(sysPara->status.reclaimTankstatus == 0x10) //7 故障，6 关完成，5开完成，4 保持， 3 停止， 2 关， 1 开，0-无操作
{
if(sysPara->devOp->isReclaimTankCloseEnable())
{
LogInfo::setRunStatusText(tr("电机故障"));
ui->tabMainWindow->setRunStatus(tr("电机故障"));
sysPara->devOp->controlReclaimTankClose(false);
ui->tabMainWindow->resetReclaimCtrlButtonText();
emit reclaimTankBlock();
}
else {
LogInfo::setRunStatusText(tr("电机故障"));
ui->tabMainWindow->setRunStatus(tr("电机故障!!!"));
sysPara->devOp->controlReclaimTankOpen(false);
ui->tabMainWindow->resetReclaimCtrlButtonText();
emit reclaimTankBlock();
}
}
else if(sysPara->status.reclaimTankstatus == 5 )//7 故障，6 关完成，5开完成，4 保持， 3 停止， 2 关， 1 开，0-无操作
{
sysPara->devOp->controlReclaimTankOpen(false); //到头，关闭
sysPara->status.reclainTankReachEnd = true;
/*应要求去掉多余到信息 LogInfo::setRunStatusText(tr("回收槽到头"));*/
ui->tabMainWindow->setRunStatus(tr("回收槽到头"));
ui->tabMainWindow->enablePrintButton(true); //仅仅在此时能使能打印按钮
ui->tabMainWindow->resetReclaimCtrlButtonText();
emit reclaimTankOpenDone();
/*回收槽开关时间校正*/
sysPara->para.reclaimTankTime =( sysPara->status.currReclaimTankPos>120 )? sysPara->status.currReclaimTankPos/10-1:12;
ui->tabSystemSetting->updateReclaimTime( sysPara->para.reclaimTankTime );
}
else if(sysPara->status.reclaimTankstatus == 0x11 )//7 故障，6 关完成，5开完成，4 保持， 3 停止， 2 关， 1 开，0-无操作
{
sysPara->devOp->controlReclaimTankOpen(false); //卡住，关闭
ui->tabMainWindow->resetReclaimCtrlButtonText();
LogInfo::setRunStatusText(tr("回收槽卡住或者回收槽开关时间设置错误"));
ui->tabMainWindow->setRunStatus(tr("回收槽卡住或者回收槽开关时间设置错误"));
emit reclaimTankBlock();
}
else if(sysPara->status.reclaimTankstatus == 1 || sysPara->status.reclaimTankstatus == 2)//7 故障，6 关完成，5开完成，4 保持， 3 停止， 2 关， 1 开，0-无操作
{
emit setReclaimTankCurrentPos(sysPara->status.currReclaimTankPos);
sysPara->status.reclaimBlockedCnt = 0;
}
else if(sysPara->status.reclaimTankstatus == 6 )//7 故障，6 关完成，5开完成，4 保持， 3 停止， 2 关， 1 开，0-无操作
{
sysPara->devOp->controlReclaimTankClose(false); //到头，关闭
/*应要求去掉多余到信息 LogInfo::setRunStatusText(tr("回收槽到头"));*/
ui->tabMainWindow->setRunStatus(tr("回收槽到头"));
//sysPara->status.currReclaimTankPos = 0; //将回收槽的时间置为零
ui->tabMainWindow->resetReclaimCtrlButtonText();
emit reclaimTankCloseDone();
sysPara->status.lastRecycleWarn = 0;
sysPara->status.HVFaultCloseEn=0;
sysPara->status.reclainCloseAppending=false;
sysPara->status.canRunAirPushing = true; //下次开回收槽就执行排气程序
//emit reclaimTankBlock();
}
else if(sysPara->status.reclaimTankstatus == 0x12 )//7 故障，6 关完成，5开完成，4 保持， 3 停止， 2 关， 1 开，0-无操作
{
sysPara->devOp->controlReclaimTankOpen(false); //到头，关闭
LogInfo::setRunStatusText(tr("回收槽卡住或者回收槽开关时间设置错误"));
ui->tabMainWindow->setRunStatus(tr("回收槽卡住或者回收槽开关时间设置错误"));
ui->tabMainWindow->resetReclaimCtrlButtonText();
emit reclaimTankBlock();
}
else // if(sysPara->status.reclaimTankstatus == 7 )//7 故障，6 关完成，5开完成，4 保持， 3 停止， 2 关， 1 开，0-无操作
{
emit setReclaimTankCurrentPos(sysPara->status.currReclaimTankPos);
}
}
static void controlTabDisplay(QTabWidget *tab,QWidget *page,QString name,int enable){
if(enable){
if(tab->indexOf(page) == -1){
tab->addTab(page,name);
}
}
else {
int index = tab->indexOf(page);
if(index != -1)
tab->removeTab(index);
}
}
static void controlTabDisplay(QTabWidget *tab,QWidget *page,QString name,int enable,int Pos){
if(enable){
if(tab->indexOf(page) == -1){
tab->insertTab(Pos,page,name);
}
}
else {
int index = tab->indexOf(page);
if(index != -1)
tab->removeTab(index);
}
}
void InkJetPrinter::onAuthChanged(int auth){
controlTabDisplay(this,ui->tabSystemSetting,tr("系统设置"),auth&AUTH_DISPLAY_SYSTEM_SETTING);
controlTabDisplay(this,ui->tabSystemManage,tr("系统管理"),auth&AUTH_DISPLAY_SYSTEM_MANAGE);
controlTabDisplay(this,ui->tabOtherInfo,tr("其他信息"),auth& AUTH_DISPLAY_OTHER_INFO);
controlTabDisplay(this,ui->tabLogInfo,tr("日志信息"),auth&AUTH_DISPLAY_LOG_INFO);
controlTabDisplay(this,ui->tabNetworkManager,tr("网络管理"),auth&AUTH_SUPER_USER1);
// controlTabDisplay(this,ui->tabZkEdit,tr("图案编辑"),auth);
ui->tabPrintSetting->updateAuthorization(auth);
ui->tabSystemSetting->updateAuthorization(auth);
ui->tabNetworkManager->updateAuthorization(auth);
}
void InkJetPrinter::onConfigChanged(void){
sysPara->loadParaFromFile();
}
/*
* 这个方法的主要目的是在切换tab时不要弹出输入法
*
*/
void InkJetPrinter::onInkJetPrinterCurrentChanged(int index)
{
QWidget *w = widget(index);
if(w){
QWidget *subWidget = w->focusWidget();
if(subWidget)
subWidget->clearFocus();
}
//if(index == 3||index == 3) //刷新打印设置这个界面
{
ui->tabPrintSetting->update();
}
}
void InkJetPrinter::closeEvent(QCloseEvent *event)
{
#ifdef SYS_LINUX
event->ignore();
#else
exit(1);
#endif
}
void InkJetPrinter::resizeEvent(QResizeEvent *event){
event->ignore();
}
void InkJetPrinter::onChangeTab(QString)
{
this->setCurrentIndex (indexOf( ui->tabPicEdit));
}
void InkJetPrinter::onchangeEditMode(int)
{
if(sysPara){
if(sysPara->para.EditMode == PICFILE) {
insertTab(1,ui->tabPicEdit,tr("信息编辑"));
// controlTabDisplay(this,ui->tabZkEdit,tr("图案编辑"),0);
}
else if(sysPara->para.EditMode == TXTFILE|| sysPara->para.EditMode == SCENE){
controlTabDisplay(this,ui->tabPicEdit,tr("信息编辑"),0);
// controlTabDisplay(this,ui->tabZkEdit,tr("图案编辑"),1,1);
}
ui->tabMainWindow->changeEditMode(sysPara->para.EditMode);
}
else{
}
}
void InkJetPrinter::OnSpeedOver(int mode)
{
if(mode==2){
//emit QMessageBox::warning(NULL,tr("警告"),tr("喷印速度过快或间隔太短！无法喷印完全，自动暂停喷印!!!"));
msgtest->setText(tr("喷印速度过快或间隔太短！无法喷印完全，自动暂停喷印!!!"));
msgtest->show();
}
else if(mode==1){
//emit QMessageBox::warning(NULL,tr("警告"),tr("喷印速度过快或间隔太短！无法喷印完全!!!"));
msgtest->setText(tr("喷印速度过快或间隔太短！无法喷印完全!!!"));
msgtest->show();
}
}
void InkJetPrinter::onPrintErrorStatus(QString s,unsigned int res)
{
if(res==1 || sysPara->status.WorkTimeOut ){
sysPara->status.WorkTimeOut =1;
sysPara->devOp->printCtrl( PRINT_CTRL_STOP);
//emit QMessageBox::warning(NULL,tr("警告"),s);
msgtest->setText(s);
msgtest->show();
}
else if(res==2) {
//emit QMessageBox::warning(NULL,tr("警告"),s);
msgtest->setText(s);
msgtest->show();
}
else if(res==3) { sysPara->status.WorkTimeOut =0; }
}
void InkJetPrinter::OnFinished(int event){
//msgtest->setText(" ");msgtest->show();
Q_UNUSED(event);
msgtest->hide();
}
unsigned char BCDtoHEX(unsigned char BCD)
{
unsigned char tempData;
tempData = (BCD >> 4) * 10 + (BCD & 0x0F);
return (tempData);
}
void InkJetPrinter::refreshModbusStatus(void)
{
#ifdef MODBUS
if (modbus->getModbusStatus() != 1) {
qDebug()<<"refresh get modbus error";
return;
}
qint16 fileNameSize = QFileInfo(sysPara->para.lastOpenedFileName).fileName().size();
if (fileNameSize) {
if (fileNameSize > 100) {
fileNameSize = 100;
}
}
QString str = QFileInfo(sysPara->para.lastOpenedFileName).fileName();
snprintf((char *)sysPara->modbusStatus.usedFileName, sizeof(sysPara->modbusStatus.usedFileName), "%s",(char *)str.toAscii().constData());
sysPara->modbusStatus.printStatus = ui->tabMainWindow->getCurrPrintStatus();
memcpy(&sysPara->modbusStatus.curCalendarAndDate, &sysPara->status.calandar_and_dat, sizeof(sysPara->status.calandar_and_dat));
unsigned char tmp[4];
memcpy(&tmp,&sysPara->modbusStatus.curCalendarAndDate.cnt1CurrValue,4);
tmp[0] = BCDtoHEX(tmp[0]);
tmp[1] = BCDtoHEX(tmp[1]);
tmp[2] = BCDtoHEX(tmp[2]);
tmp[3] = BCDtoHEX(tmp[3]);
//memcpy(&sysPara->modbusStatus.curCalendarAndDate.cnt1CurrValue,&tmp,4);
sysPara->modbusStatus.curCalendarAndDate.cnt1CurrValue = tmp[3]*1000000 + tmp[2]*10000+ tmp[1]*100 + tmp[0] ;
//sysPara->modbusStatus.curCalendarAndDate.cnt1CurrValue = QString::number(sysPara->modbusStatus.curCalendarAndDate.cnt1CurrValue).toUInt(0,16);
sysPara->modbusStatus.curCalendarAndDate.cnt1CurrValue = QString::number(sysPara->status.calandar_and_dat.cnt1CurrValue,16).toInt();
sysPara->modbusStatus.curCalendarAndDate.cnt2CurrValue = QString::number(sysPara->status.calandar_and_dat.cnt2CurrValue,16).toInt();
sysPara->modbusStatus.curCalendarAndDate.cnt1End = sysPara->para.cnt1EndValue;
sysPara->modbusStatus.curCalendarAndDate.cnt2End = sysPara->para.cnt2EndValue;
sysPara->modbusStatus.curCalendarAndDate.cnt2Repeat = sysPara->para.cnt2RepeateValue;
sysPara->modbusStatus.curCalendarAndDate.cnt2InitValue = sysPara->para.cnt2StartValue;
sysPara->modbusStatus.productCnt = sysPara->status.productCnt;
sysPara->modbusStatus.statWarn = sysPara->status.RedLightOnFlag ;
// 显示正在打印内容的行数和列数
int wmax = sysPara->status.currPrintRow;
if (sysPara->para.AlterMode) {
wmax = sysPara->status.currAlterPrintRow;
}
sysPara->modbusStatus.mbCurrPrintRow = wmax;
sysPara->modbusStatus.mbCurrPrintCol = sysPara->status.currPrintCol;
#endif
}
void InkJetPrinter::onModbusWriteCalendar()
{
#ifdef MODBUS
if (modbus->getModbusStatus() == -1) {
qDebug()<<"get modbus error";
return;
}
sysPara->para.cnt1StartValue = sysPara->modbusParas.setCalendar.cnt1CurrValue;
sysPara->para.cnt1EndValue = sysPara->modbusParas.setCalendar.cnt1End;
sysPara->para.cnt1CurrValue = sysPara->modbusParas.setCalendar.cnt1Repeat;
sysPara->para.cnt1StepValue = sysPara->modbusParas.setCalendar.cnt1Step;
sysPara->para.cnt2StartValue = sysPara->modbusParas.setCalendar.cnt2InitValue;
sysPara->para.cnt2EndValue = sysPara->modbusParas.setCalendar.cnt2End;
sysPara->para.cnt2StepValue = sysPara->modbusParas.setCalendar.cnt2Repeat;
sysPara->para.cnt2RepeateValue = sysPara->modbusParas.setCalendar.cnt2Step;
if (sysPara->modbusParas.setCalendar.cntCurrValueInitEnable & 0x02) {
sysPara->status.cnt2CurrentValueInitDoneFlag = 0;
}
if (sysPara->modbusParas.setCalendar.cntCurrValueInitEnable & 0x01) {
sysPara->status.cnt1CurrentValueInitDoneFlag = 0;
}
sysPara->para.cnt1CurrValue = sysPara->modbusParas.setCalendar.cnt1CurrValue;
sysPara->para.cnt2CurrValue = sysPara->modbusParas.setCalendar.cnt2CurrValue;
sysPara->devOp->writeFpgaCalandar(0);
emit updataPara2UI();
#endif
}
void InkJetPrinter::close_jd_timer()
{
jd_timer->stop();
timer->stop();
}
void InkJetPrinter::handlePushButtonStartPressed(bool flag)
{
pushButtonStartFlag = flag;
if(flag)
{
PID_init();
}
sysPara->status.gearPumpRunStopFlag = !flag;//齿轮泵开关
}
void InkJetPrinter::handleInitedPID()
{
PID_init();
}
void InkJetPrinter::fpgaDebugWriteByte()
{
#ifdef __FPGA_DEBUG__
if(sysPara == NULL) {
return;
}
int fpgaAddr = ui->fpgaByteAddrSpinBox->value();
unsigned char fpgaValue = ui->fpgaByteValueSpinBox->value();
sysPara->devOp->fpgaWr(fpgaAddr, &fpgaValue, 1);
#endif
}
void InkJetPrinter::fpgaDebugReadByte()
{
#ifdef __FPGA_DEBUG__
if(sysPara == NULL) {
return;
}
int fpgaAddr = ui->fpgaByteAddrSpinBox->value();
unsigned char fpgaValue;
sysPara->devOp->fpgaRd(fpgaAddr, &fpgaValue, 1);
ui->fpgaByteValueSpinBox->setValue(fpgaValue);
#endif
}
void InkJetPrinter::fpgaDebugWriteWord()
{
#ifdef __FPGA_DEBUG__
if(sysPara == NULL) {
return;
}
int fpgaAddr = ui->fpgaWordAddrSpinBox->value();
unsigned int fpgaValue = ui->fpgaWorldValueSpinBox->value();
unsigned char buff[2];
buff[0] = fpgaValue & 0xFF;
buff[1] = (fpgaValue >> 8) & 0xFF;
sysPara->devOp->fpgaWr(fpgaAddr, buff, 2);
#endif
}
void InkJetPrinter::fpgaDebugReadWord()
{
#ifdef __FPGA_DEBUG__
if(sysPara == NULL) {
return;
}
int fpgaAddr = ui->fpgaWordAddrSpinBox->value();
unsigned int fpgaValue;
unsigned char buff[2];
sysPara->devOp->fpgaRd(fpgaAddr, buff, 2);
fpgaValue = buff[1]<<8|buff[0];
ui->fpgaWorldValueSpinBox->setValue(fpgaValue);
#endif
}
void InkJetPrinter::fpgaDebugWriteDWord()
{
#ifdef __FPGA_DEBUG__
if(sysPara == NULL) {
return;
}
int fpgaAddr = ui->fpgaDWordAddrSpinBox->value();
unsigned int fpgaValueH = ui->fpgaDWorldValueHSpinBox->value();
unsigned int fpgaValueL = ui->fpgaDWorldValueLSpinBox->value();
unsigned char buff[4];
buff[0] = fpgaValueL & 0xFF;
buff[1] = (fpgaValueL >> 8) & 0xFF;
buff[2] = fpgaValueH & 0xFF;
buff[3] = (fpgaValueH >> 8) & 0xFF;
sysPara->devOp->fpgaWr(fpgaAddr, buff, 4);
#endif
}
void InkJetPrinter::fpgaDebugReadDWord()
{
#ifdef __FPGA_DEBUG__
if(sysPara == NULL) {
return;
}
int fpgaAddr = ui->fpgaDWordAddrSpinBox->value();
unsigned char buff[4];
sysPara->devOp->fpgaRd(fpgaAddr, buff, 4);
unsigned int fpgaValueL = buff[1]<<8|buff[0];
unsigned int fpgaValueH = buff[3]<<8|buff[2];
ui->fpgaDWorldValueHSpinBox->setValue(fpgaValueH);
ui->fpgaDWorldValueLSpinBox->setValue(fpgaValueL);
#endif
}
void InkJetPrinter::recievedFile2Save(QString fileName)
{
//qDebug() << "recieveFile2Save:"<<fileName;
QMessageBox::StandardButton ret;
ret = QMessageBox::question(this, tr("提示"),
tr("是否接收新的信息!"),
QMessageBox::Ok | QMessageBox::Cancel);
if (ret == QMessageBox::Ok){
QString sourceName = "/tmp/" + fileName;
QString saveName = DOC_DIR;
saveName = saveName + "/";
saveName = saveName + fileName;
qDebug()<<"sourceName "<<sourceName<<"saveName "<<saveName;
QDir *createfile = new QDir;
bool exist = createfile->exists(saveName);
if (exist)
{
createfile->remove(saveName);
}//end if
QFile::copy ( sourceName,saveName );
emit openFile(saveName,false);
//emit startPrint();确认接收到消息立即打印
//ui->tabMainWindow->getTexteditOption()->onFileOpen(saveName,false);
//ui->tabMainWindow->on_pushButtonStartPrint_pressed();
}
else {
}
}
void InkJetPrinter::viscosity_timerHandler()
{
if(!firstTime)
qDebug()<<"错误!粘度计故障:检测不到上位灯";
// LogInfo::setRunStatusText(tr("错误!粘度计故障:检测不到上位灯"));
viscosity_timer->stop();
firstTime = 0;
}
void InkJetPrinter::disableTabClick(){
this->setDisabled(true);
this->setCurrentIndex(0);
}
static int highPressureCnt = 0;
static unsigned int logCnt = 0;
void InkJetPrinter::checkPressureControl(){ //1s
unsigned int alarmPressure = 0;
if(sysPara->para.pressure <= 700)
alarmPressure = 800;
else
alarmPressure = 900;
if(sysPara->status.PRESSURE > alarmPressure)
highPressureCnt++;
else
highPressureCnt = 0;
if(highPressureCnt >= 4 && sysPara->status.PRESSURE > 1000){
QString str = tr("压力过高,请检查管路是否堵塞,然后点击故障恢复按钮");
showMessage(str);
sysPara->para.gearPumpValue = 0;
sysPara->devOp->WriteMoterPump();
sysPara->status.isPumpValveControledByHand = true;
sysPara->devOp->mainInkCtrl();
sysPara->status.flagOfPressureFault = true;
}
}
void InkJetPrinter::showMessage(QString str){
if(logCnt++ % 30 == 0){
LogInfo::setRunStatusText(str);
qDebug()<<str;
}
sysPara->devOp->color_flag = 2;
ui->tabMainWindow->setRunStatus(str);
}
void InkJetPrinter::resetPressureCnt(){
logCnt = 0;
highPressureCnt = 0;
sysPara->status.isPumpValveControledByHand = false;
}
void InkJetPrinter::pressureAdjustForsystemseeting(){
pressureAdj(1);
}
Reference in New Issue View Git Blame Copy Permalink