hlp:更新翻译，开机报警不可以开回收槽，运行中报警缺少3h后自动收喷嘴;新增粘度阈值设置界面，提醒粘度异常情况，严重越界自动收喷嘴

hlp:新增粘度报警界面（未完成）
hlp:最多添加两个计数器，编辑计数器图元，只显示当前计数器的修改tab
2026-09-24 10:19:15 +08:00 · 2026-09-21 10:46:02 +08:00 · 2026-09-19 08:16:46 +08:00 · 2026-09-18 15:20:13 +08:00 · 2026-09-16 16:53:19 +08:00 · 2026-09-16 14:13:36 +08:00
52 changed files with 5860 additions and 3662 deletions
@@ -70,3 +70,4 @@ QtUI.r668
 800X600_New_SystemProject-_NewInterface.zip
 bnsTest.png
 printSceneView.png
+docs/
@@ -91,7 +91,7 @@ void CounterVarSet::onDigitsChanged(int digits)
    endValueBox->setValue(maxValue);
 }

-void CounterVarSet::setCounterConfig(CounterViewModel viewModel)
+void CounterVarSet::setCounterConfig(CounterViewModel viewModel, bool isChange)
 {
    m_vm = viewModel;

@@ -101,7 +101,7 @@ void CounterVarSet::setCounterConfig(CounterViewModel viewModel)
    ui->tabWidget->setCurrentIndex(viewModel.counterType == COUNTER_TYPE_1 ? 1 : 2);
    ui->letterSpaceSpinBox->setValue(viewModel.letterSpace);

-    updateSysParaToUI();
+    updateSysParaToUI(isChange);
 }

 void CounterVarSet::getValue(int *varType,int *digitalWidth,unsigned char *splitMode){
@@ -139,8 +139,10 @@ void CounterVarSet::applyUIPara()
    m_vm.cnt2Settings.currValue = ui->spinBoxCnt2CurrValue->value();
 }

-void CounterVarSet::updateSysParaToUI()
+void CounterVarSet::updateSysParaToUI(bool isChange)
 {
+    handleChange(isChange);
+
    ui->spinBoxCnt1EndValue->setValue(m_vm.cnt1Settings.endValue);
    ui->spinBoxCnt1RepeateCnt->setValue(m_vm.cnt1Settings.repeatValue);
    ui->spinBoxCnt1StartValue->setValue(m_vm.cnt1Settings.startValue);
@@ -154,6 +156,42 @@ void CounterVarSet::updateSysParaToUI()
    ui->spinBoxCnt2CurrValue->setValue(m_vm.cnt2Settings.currValue);
 }

+void CounterVarSet::handleChange(bool isChange)
+{
+    if (isChange) {
+        const bool useCnt1 = ui->radioButtonVar1->isChecked();
+        if (useCnt1) {
+            // 只显示 cnt1Tab
+            if (ui->tabWidget->indexOf(ui->cnt2Tab) >= 0)
+                ui->tabWidget->removeTab(ui->tabWidget->indexOf(ui->cnt2Tab));
+            if (ui->tabWidget->indexOf(ui->cnt1Tab) < 0)
+                ui->tabWidget->insertTab(1, ui->cnt1Tab, tr("计数器1"));
+
+            ui->tabWidget->setCurrentWidget(ui->cnt1Tab);
+            ui->radioButtonVar1->setEnabled(true);
+            ui->radioButtonVar2->setEnabled(false);
+        } else {
+            // 只显示 cnt2Tab
+            if (ui->tabWidget->indexOf(ui->cnt1Tab) >= 0)
+                ui->tabWidget->removeTab(ui->tabWidget->indexOf(ui->cnt1Tab));
+            if (ui->tabWidget->indexOf(ui->cnt2Tab) < 0)
+                ui->tabWidget->insertTab(1, ui->cnt2Tab, tr("计数器2"));
+
+            ui->tabWidget->setCurrentWidget(ui->cnt2Tab);
+            ui->radioButtonVar1->setEnabled(false);
+            ui->radioButtonVar2->setEnabled(true);
+        }
+    } else {
+        // 两个都显示
+        if (ui->tabWidget->indexOf(ui->cnt1Tab) < 0)
+            ui->tabWidget->insertTab(1, ui->cnt1Tab, tr("计数器1"));
+        if (ui->tabWidget->indexOf(ui->cnt2Tab) < 0)
+            ui->tabWidget->insertTab(2, ui->cnt2Tab, tr("计数器2"));
+        ui->radioButtonVar1->setEnabled(true);
+        ui->radioButtonVar2->setEnabled(true);
+    }
+}
+
 void CounterVarSet::applyStyleSheet()
 {
    QString styleSheet =
@@ -353,4 +391,4 @@ void CounterVarSet::applyStyleSheet()
            )";

    this->setStyleSheet(styleSheet);
-}
+}
@@ -25,14 +25,15 @@ public:
    void applyStyleSheet();
    void getValue(int *varType,int *digitalWidth,unsigned char *splitMode);

-    void updateSysParaToUI();			//重载
+    void updateSysParaToUI(bool isChange);			//重载
+    void handleChange(bool isChange);
    void applyUIPara();					//重载

    // 获取当前计数器配置：varType(7或8) 和 digitalNum(位数)
    CounterViewModel getCounterConfig();

    // 设置ui，用户编辑计数器item时，会调用此函数显示计数器的配置
-    void setCounterConfig(CounterViewModel viewModel);
+    void setCounterConfig(CounterViewModel viewModel, bool isChange);
 signals:
   void sendButtonClickedSignal(int);

@@ -0,0 +1,24 @@
+
+#ifndef _CUSTOM_DOUBLE_SPIN_BOX_H_
+#define _CUSTOM_DOUBLE_SPIN_BOX_H_
+
+#include <QDoubleSpinBox>
+#include <QString>
+
+class CustomDoubleSpinBox : public QDoubleSpinBox {
+public:
+    explicit CustomDoubleSpinBox(QWidget *parent = nullptr) : QDoubleSpinBox(parent) {
+        // 设置一个较大的最大位数，让用户有足够的输入精度
+        setDecimals(10);
+    }
+
+protected:
+    // 重写此方法，自定义数值如何显示在输入框中
+    QString textFromValue(double value) const override {
+        // 使用 'g' 格式可以自动去掉末尾不必要的零
+        // 或者使用 QString::number 配合手动处理
+        return QString::number(value, 'g', decimals());
+    }
+};
+
+#endif // _CUSTOM_DOUBLE_SPIN_BOX_H_
@@ -3,7 +3,9 @@
 #include "MyInputMethod.h"
 #include <QObject>
 #include <QSpinBox>
+#include <QDoubleSpinBox>
 #include <QSpinBox>
+#include <QRegularExpression>
 #include <QDebug>
 #include <QKeyEvent>

@@ -52,8 +54,7 @@ DigitalInput::~DigitalInput()
 void DigitalInput::onCharPressed(){
    QPushButton * button = qobject_cast<QPushButton *>(sender());
    QString ch = button->text();
-
-    if (!m_currSpinBox) {       
+    if (!m_currSpinBox && !m_currDoubleSpinBox) {
        ui->traceEdit->insert(ch);
        return;
    }
@@ -62,34 +63,60 @@ void DigitalInput::onCharPressed(){
    QString currentText = ui->traceEdit->text();
    QString newText = currentText.left(cursorPos) + ch + currentText.mid(cursorPos);

-    if (newText.isEmpty()) {     
+    if (newText.isEmpty()) {
+        ui->traceEdit->insert(ch);
+        return;
+    }
+
+    if(m_currDoubleSpinBox) {
+        // 用正则表达式判定 newText是否是一个浮点数或部分浮点输入。
+        // 允许的示例: 0.2251, 15.335, 15, -924.02, 5. (末尾点为临时状态), .5
+        // 也允许单独的正负号作为正在输入中的状态: "-" 或 "+"
+        QString simulated = newText;
+
+        // Allow single sign while typing
+        if (simulated == "-" || simulated == "+") {
+            ui->traceEdit->insert(ch);
+            return;
+        }
+
+        // Regular expression: optional sign, then either digits with optional dot+digits, or dot+digits, or digits+dot (partial)
+        // 不限制小数位数；最终的最小/最大以及精度由 hideEvent 写回时决定
+        QRegularExpression re("^[+-]?((\\d+(\\.\\d*)?)|(\\.\\d*))$");
+        QRegularExpressionMatch match = re.match(simulated);
+        if (!match.hasMatch()) {
+            // not a valid float format (even partial) -> reject
+            return;
+        }
+
+        // acceptable -> insert
+        ui->traceEdit->insert(ch);
+        return;
+    }
+
+    if(ch == "." && m_currSpinBox) {
+        // SpinBox不能输入 .
+        return;
+    }
+
+    if(ch == "-" && m_currSpinBox->minimum() < 0 && currentText.isEmpty()) {
        ui->traceEdit->insert(ch);
        return;
    }

    bool ok = false;
    int value = newText.toInt(&ok);
-    if (!ok) {                    
-        ui->traceEdit->insert(ch);
+    if (!ok) {
        return;
    }

    int max = m_currSpinBox->maximum();
-    if (value <= max) {  
+    if (value <= max) {
        ui->traceEdit->insert(ch);
    }
 }

 void DigitalInput::onKeyBackspacePressed(){
-
-//     if(m_currSpinBox && QString::number(m_currSpinBox->value()).size() == 1) {
-//         ui->traceEdit->clear();
-//     }
-
-// #ifndef Q_OS_WIN32
-// //QWSServer::sendKeyEvent(0,Qt::Key_Backspace,Qt::NoModifier,true,false);		//锟斤拷系统锟斤拷锟酵硷拷锟斤拷锟铰硷拷
-//     MyInputMethod::sendEvent(Qt::Key_Backspace,Qt::NoModifier);
-// #endif
    int cursorPos = ui->traceEdit->cursorPosition();
    if (cursorPos > 0) {
        QString text = ui->traceEdit->text();
@@ -131,12 +158,6 @@ void DigitalInput::onEnterPressed()

 void DigitalInput::onClrPressed()
 {
-    // if(m_currSpinBox) {
-    //     m_currSpinBox->setValue(std::min(m_currSpinBox->maximum(), std::max(m_currSpinBox->minimum(), 0)));
-    //     ui->traceEdit->setText(m_currSpinBox->value());
-    //     // ui->traceEdit->setFocus();
-    // }
-
    ui->traceEdit->clear();
    ui->traceEdit->setFocus();
 }
@@ -147,14 +168,28 @@ void DigitalInput::showEvent(QShowEvent *event)
    raise();

    auto focusWidget = qApp->focusWidget();
+
+    QDoubleSpinBox* dbox = dynamic_cast<QDoubleSpinBox*>(focusWidget);
+    if (dbox) {
+        m_currDoubleSpinBox = dbox;
+        m_currSpinBox = nullptr;
+        // Show value without padding trailing zeros (avoid decimals() padding)
+        ui->traceEdit->setText(QString::number(dbox->value(), 'g', 15));
+        ui->traceEdit->setFocus();
+        qDebug() << "The traceEdit has connected to the QDoubleSpinBox: " << dbox->objectName();
+        return;
+    }
+
    QSpinBox* box = dynamic_cast<QSpinBox*>(focusWidget);
    if(!box) {
-        qWarning() << "focusWidget is not QSpinBox";
+        qWarning() << "focusWidget is not QSpinBox or QDoubleSpinBox";
        m_currSpinBox = nullptr;
+        m_currDoubleSpinBox = nullptr;
        return;
    }

    m_currSpinBox = box;
+    m_currDoubleSpinBox = nullptr;
    ui->traceEdit->setText(box->text());
    // focusWidget->clearFocus();
    ui->traceEdit->setFocus();
@@ -167,6 +202,18 @@ void DigitalInput::hideEvent(QHideEvent * event)
 {
    QWidget::hideEvent(event);

+    if (m_currDoubleSpinBox) {
+        bool ok = false;
+        double value = ui->traceEdit->text().toDouble(&ok);
+        if (!ok) value = m_currDoubleSpinBox->value();
+        double min = m_currDoubleSpinBox->minimum();
+        double max = m_currDoubleSpinBox->maximum();
+        value = qBound(min, value, max);
+        m_currDoubleSpinBox->setValue(value);
+        m_currDoubleSpinBox->clearFocus();
+        return;
+    }
+
    if(m_currSpinBox) {
        int value = ui->traceEdit->text().toInt();
        int min = m_currSpinBox->minimum();
@@ -175,4 +222,4 @@ void DigitalInput::hideEvent(QHideEvent * event)
        m_currSpinBox->setValue(value);
        m_currSpinBox->clearFocus();
    }
-}
+}
@@ -3,6 +3,7 @@

 #include <QWidget>
 #include <QSpinBox>
+#include <QDoubleSpinBox>

 class MyInputMethod;
 namespace Ui {
@@ -36,6 +37,7 @@ private:

 	MyInputMethod *myInputMethod;
 	QSpinBox* m_currSpinBox = nullptr;
+	QDoubleSpinBox* m_currDoubleSpinBox = nullptr;
 };

 #endif // DIGITALINPUT_H
@@ -144,9 +144,7 @@ void InkJetPrinter::init()
    connect(m_CounterVarSet,&CounterVarSet::sig_updateSelectedCounter,this,&InkJetPrinter::slt_counterVarUpdate);
    
    connect(m_MainInstruction,&MainInstruction::newFileBtnClick,m_TestPrintWidget,&TestPrintWidget::on_newfileButton_pressed);
-
    connect(m_MainInstruction, &MainInstruction::superJmAccepted, this, &InkJetPrinter::resetRFIDStatus);
-
 //    connect(myInputMethod,&MyInputMethod::sendEnterClickedSignal,&TestPrintWidget::onEditItemDone);
    // connect(myInputMethod,SIGNAL(sendEnterClickedSignal()),m_TestPrintWidget,SLOT(onEditItemDone()));
    connect(m_DateVarSet,SIGNAL(backSpaceBtn()),myInputMethod,SLOT(backSapceButtonDel()));
@@ -187,7 +185,7 @@ void InkJetPrinter::init()
    m_PrintSetting->updateModelToUI();
    m_SystemSetting->updateSysParaToUI();
    m_OtherInfo->updateSysParaToUI();
-    m_CounterVarSet->updateSysParaToUI();
+    m_CounterVarSet->updateSysParaToUI(false);

    m_SystemManage->loadKeyBoardType();
    
@@ -256,11 +254,11 @@ void InkJetPrinter::init()
 }

 // type 1,2: 分别显示计数器1或2的界面
-void InkJetPrinter::slt_editCounter(CounterViewModel vm)
+void InkJetPrinter::slt_editCounter(CounterViewModel vm, bool isChange)
 {
    if (m_CounterVarSet) {
-        m_CounterVarSet->updateSysParaToUI();
-        m_CounterVarSet->setCounterConfig(vm);
+//        m_CounterVarSet->updateSysParaToUI(isChange);
+        m_CounterVarSet->setCounterConfig(vm,isChange);
        m_StackedWidget->setCurrentWidget(m_CounterVarSet);
    }
 }
@@ -311,7 +309,7 @@ void InkJetPrinter::showEvent(QShowEvent *e)
                fpgaReadyTimer = nullptr;
            }
            else {
-                qDebug() << "FPGA not connected yet.";
+//                qDebug() << "FPGA not connected yet.";
            }
        });

@@ -789,7 +787,7 @@ void InkJetPrinter::timerHandler(void){
                checkPressureControl();

            if((QTime::currentTime()>=QTime(00,00,00))&&(QTime::currentTime()<=QTime(00,00,02))&&sysPara->para.Reciclar){
-                if(m_MainWidget->getCurrPrintStatus() != 1){
+                if(sysPara->status.isPrinting == false){
                    m_MainWidget->_on_pushButtonPowerOff_pressed(false);
                    LogInfo::setRunStatusText(tr("定时开机循环完成，准备关机"));
                }
@@ -889,29 +887,6 @@ void InkJetPrinter::timerHandler(void){
            sysPara->devOp->readFgaStatus();
        }

-        /**************桂澳增加超速提示*****************************/
-        static int logCtrl = 0;
-        if((sysPara->para.printTriggerMode == PRINT_TRIGGER_SYNCHRONIZER || sysPara->para.eleEyeTriggerSynPrintEn)
-                && sysPara->status.lesslen_warn == 1){ //置1表示超速了
-            if(logCtrl++ % 500 == 0){
-//                LogInfo::setRunStatusText(tr("速度过快,请检查是否漏喷!!!"));
-                qDebug()<<"速度过快,请检查是否漏喷!!!";
-            }
-
-            /*if(msgBox1->isHidden()){ //桂澳的超速提示先保留
-                msgBox1->setText(tr("速度过快,请检查是否漏喷!!!"));
-                msgBox1->show();
-                LogInfo::setRunStatusText(tr("速度过快,请检查是否漏喷!!!"));
-                qDebug()<<"速度过快,请检查是否漏喷!!!";
-            }*/
-            sysPara->devOp->controlRedLight(true);
-            sysPara->devOp->controlGreenLight(false);
-        }
-        else{
-//            if(!msgBox1->isHidden())
-//                sysPara->devOp->controlRedLight(false);
-        }
-
        sysPara->status.gearPumpRunSpeed = (PulseCnt * 60 * 1000) / (500 * 2);
        if(!sysPara->para.gearPumpEnable)
            sysPara->status.PRESSURE *= 5;			//响应群众号召，数值放大五倍
@@ -923,7 +898,7 @@ void InkJetPrinter::timerHandler(void){

        if(sysPara->status.delay10ms%5 == 0)
        {//复位发送打印数据
-            if((m_MainWidget->getCurrPrintStatus() == 1)&&sysPara->para.ResetSendData)
+            if(sysPara->status.isPrinting && sysPara->para.ResetSendData)
            {
                static bool oneTimeFlag = false;
                if(sysPara->status.productCnt== 0 && (oneTimeFlag==false))//计米复位发送打印数据
@@ -950,7 +925,6 @@ void InkJetPrinter::timerHandler(void){
                lastProductCount = sysPara->status.productCnt;

                if(vartypeR != 0){     //更新替换变量的值
-//                    LogInfo::setRunStatusText("vartypeR");
                    MySleep(100);
                    m_MainWidget->onPreviewScene();
                    m_MainWidget->SendPrintDataToFpga(0);
@@ -969,15 +943,6 @@ void InkJetPrinter::timerHandler(void){
            }

            if (!updateAreas.isEmpty() && m_StackedWidget->currentWidget() == m_MainWidget) {
-                // // 统计追踪更新频率
-                // static QElapsedTimer bnsTimer;
-                // static int toogleCount = 0;
-                // ++toogleCount;
-                // if(toogleCount > 10) {
-                //     auto elapsed = bnsTimer.restart();
-                //     qDebug() << (QString("timeHandler avg elapsed: %1 s").arg(elapsed / qreal(toogleCount) / 1000.0));
-                //     toogleCount = 0;
-                // }
                m_MainWidget->updatePrintDisplayLabel();
            }

@@ -989,9 +954,7 @@ void InkJetPrinter::timerHandler(void){
            if(gearPumpRunFlag || sysPara->para.gearPumpEnable == 0)
            {
                if(!sysPara->status.selfCheckDone && sysPara->status.isPrinting){
-                    // sysPara->status.selfCheckDone = true;
                    m_MainWidget->updatePrintDisplayLabel();
-//                    sysPara->status.flagOfAbnormalStatus = true;
                    qDebug()<<"打印过程中死机了!!!";
                    
                    m_MainWidget->on_m_StopBtn_clicked();
@@ -1011,7 +974,6 @@ void InkJetPrinter::timerHandler(void){
                        m_MainWidget->setReclaimOpenBtnStatus(false);
                        m_MainWidget->setReclaimCloseBtnStatus(false);

-//                        m_MainWidget->enablePrintButton(false);
                        sysPara->devOp->mainInkCtrl();
                        sysPara->para.TrunOnPowerCnt++;// 20151218 开机次数加1
                        sysPara->saveParaToFile();     // 保存开机次数值
@@ -1032,11 +994,11 @@ void InkJetPrinter::timerHandler(void){
                    if(sysPara->status.selfCheckCnt >= MAX_SELF_CHECK_CNT)
 #endif
                    {
-                        sysPara->status.selfCheckDone = true;
+                        // 自检完成 selfCheckDone=true
                        // 通过状态管理器发送事件，在 onStateChanged 中更新 sysPara
-                        // if (m_stateManager && m_stateManager->isState(PrinterState::SELF_CHECK)) {
-                        //     m_stateManager->requestTransition(PrinterEvent::SelfCheckDone);
-                        // }
+                        if (m_stateManager && m_stateManager->isState(PrinterState::IDLE)) {
+                            m_stateManager->requestTransition(PrinterEvent::PowerOn);
+                        }

                        // 自检完成后管道恢复正常阻力，重置软启动让压力重新平稳收敛
                        // 不清零 u，从当前控制字开始，避免突变
@@ -1049,29 +1011,15 @@ void InkJetPrinter::timerHandler(void){
                        for(int i = 0; i < 10; i++) m_pressureBuf[i] = 0;
                        m_bufIdx = 0;
                        
-                        m_MainWidget->setReclaimOpenBtnStatus(true);
-                        m_MainWidget->setReclaimCloseBtnStatus(false);
-
                        sysPara->devOp->mainInkCtrl();
                        sysPara->status.canRunAirPushing = true;

                        // 自检完成后，关闭高电压，不知道为什么，有时候开机自检都有高压
                        sysPara->devOp->highVoltageCtrl(0);

-                        m_MainWidget->on_m_StopBtn_clicked();
-
-                        LogInfo::setRunStatusText(tr("自检完成!!!"));
-                        m_MainWidget->setRunStatus(tr("自检完成!!!"));
-                        qDebug()<<"自检完成!!!";
-
                        if(sysPara->para.Reciclar)
                            test_flag = 1;
                    }
-                    else {
-                        if((sysPara->status.selfCheckCnt % 200) == 0)
-                            m_MainWidget->setReclaimOpenBtnStatus(false);
-                            m_MainWidget->setReclaimCloseBtnStatus(false);
-                    }

                }
                else{
@@ -1161,8 +1109,7 @@ void InkJetPrinter::timerHandler(void){
 //            cnt1GroupCheck();//分段计米
 #endif
            //reserved
-            QWidget *widget = m_StackedWidget->currentWidget();
-            static bool read_flag =  false;    
+            QWidget *widget = m_StackedWidget->currentWidget();  
            if((widget == m_MainWidget || widget == m_LogInfo) && pulse_100ms) {
                m_MainWidget->updateSysStatusToUI();
                m_MainWidget->updateGeneralState(m_MainWidget->alarmStatus);
@@ -1172,11 +1119,6 @@ void InkJetPrinter::timerHandler(void){
            else if(widget == m_PrintSetting)
            {
                m_PrintSetting->updateSysStatusToUI();
-//                if(!read_flag)
-//                {
-//                    emit sendPicScene(ui->tabMainWindow->getPicScene());
-//                }
-                read_flag = true;
            }
            else if(widget == m_SystemSetting){

@@ -1194,10 +1136,6 @@ void InkJetPrinter::timerHandler(void){
 //                    ui->tabNetworkManager->updateSysStatusToUI();
 //                }
 //            }
-            if(widget  !=  m_PrintSetting)
-            {
-                read_flag = false;
-            }

            //  20140306
            static int last_lesslen_warn=0,lesslen_cnt=0;
@@ -1228,6 +1166,9 @@ void InkJetPrinter::timerHandler(void){

        if(pulse_100ms && sysPara->status.selfCheckDone){
                detectAndcontrolReclaimTank();			//控制回收槽
+                if (m_stateManager) {
+                    m_stateManager->checkReadyState();
+                }
        }

        /*---------------------------------处理警告--------------------------------------------*/
@@ -1252,7 +1193,6 @@ void InkJetPrinter::timerHandler(void){
 //            if(sysPara->status.needMaintenanceRemind){
 //                warningHandler(3);
 //            }
-//            LogInfo::setRunStatusText(tr("处理警告:%1").arg(QDateTime::currentDateTime()));

            handleWarnInk(); // 处理墨水警告
            handleWarnSolvent(); // 处理溶剂警告
@@ -1838,63 +1778,76 @@ void InkJetPrinter::initStateManager()
    m_stateManager = PrinterStateManager::instance();

    // 连接状态变化信号 DirectConnection:确保相关状态实时更新
-    // connect(m_stateManager, &PrinterStateManager::sig_stateChanged,
-    //         this, &InkJetPrinter::slt_stateChanged, Qt::DirectConnection);
+    connect(m_stateManager, &PrinterStateManager::sig_stateChanged,
+            this, &InkJetPrinter::slt_stateChanged, Qt::DirectConnection);
+    // 使能开始打印、停止打印、开回收槽、关回收槽按钮
+    connect(m_stateManager, &PrinterStateManager::sig_enableStartPrint,
+            this, &InkJetPrinter::slt_enableStartPrint, Qt::DirectConnection);
+    connect(m_stateManager, &PrinterStateManager::sig_enableStopPrint,
+            this, &InkJetPrinter::slt_enableStopPrint, Qt::DirectConnection);
+    connect(m_stateManager, &PrinterStateManager::sig_enableOpenTank,
+            this, &InkJetPrinter::slt_enableOpenTank, Qt::DirectConnection);
+    connect(m_stateManager, &PrinterStateManager::sig_enableCloseTank,
+            this, &InkJetPrinter::slt_enableCloseTank, Qt::DirectConnection);
+    // 更新回收槽状态
+    connect(m_stateManager, &PrinterStateManager::sig_updateReclaimStatus,
+            this, [=](){m_MainWidget->updateReclaimText();});
+    // 不能进入准备状态，关回收槽
+    connect(m_stateManager, &PrinterStateManager::sig_closeTank,
+            this, [=](){m_MainWidget->on_m_LeftBtn_clicked();});
+    // 信息
+    connect(m_stateManager, &PrinterStateManager::sig_infoMsg,
+            this, [=](QString msg){m_MainWidget->setRunStatus(msg);});
+

    // ============ 开机时重置状态 ============
    m_stateManager->initFromSysPara();
    sysPara->status.selfCheckDone = false;      // 自检是否完成
    sysPara->status.isPrinting = false;         // 是否正在打印
-    sysPara->status.powerOffAppending = false;   // 是否正在关机
-
-    // 发送 PowerOn 事件进入自检状态
-//    if (!sysPara->status.selfCheckDone) {
-//        m_stateManager->requestTransition(PrinterEvent::PowerOn);
-//    }
-
-//    initStateTimer();
-}
-
-void InkJetPrinter::initStateTimer()
-{
-    // ============ 测试定时器 ============
-    m_testTimer = new QTimer(this);
-    connect(m_testTimer, &QTimer::timeout, this, &InkJetPrinter::slt_stateTest);
-    m_testTimer->start(3000);  // 3秒切换一次
+    sysPara->status.powerOffAppending = false;  // 是否正在关机
+    m_stateManager->bindSysPara(sysPara);
 }

 void InkJetPrinter::handleSelfCheck()
 {
-    sysPara->status.selfCheckDone = false;
-    sysPara->status.selfCheckCnt = 0;
-    m_MainWidget->enablePrintButton(false);
+    // 自检完成，非打印状态，回收槽放下后使能打印按钮
+    if (!sysPara->status.selfCheckDone) {
+        sysPara->status.selfCheckDone = true;
+        LogInfo::setRunStatusText(tr("自检完成!!!"));
+        m_MainWidget->setRunStatus(tr("自检完成!!!"));
+    }
 }

 void InkJetPrinter::handleReady()
 {
-    // 自检完成，非打印状态，回收槽放下后使能打印按钮
-    sysPara->status.selfCheckDone = true;
    sysPara->status.isPrinting = false;
-    if(sysPara->status.reclaimTankstatus == 5) {
-        m_MainWidget->enablePrintButton(true);
-    } else {
-        m_MainWidget->enablePrintButton(false);
-    }
-
+//    MySleep(50);
+//    m_MainWidget->updateReclaimStatus();
 }

 void InkJetPrinter::handleStartPrint()
 {
    sysPara->status.isPrinting = true;
+    sysPara->status.waitHightVolOff = 0;
+    sysPara->status.lastSynColDelay = -1;			//目的是为了清空原来的数据
    sysPara->devOp->highVoltageCtrl(1);
    sysPara->devOp->setHighVoltageAmplitudetoSTM32();
-    sysPara->status.waitHightVolOff = 0;
+    sysPara->devOp->printCtrl(PRINT_CTRL_START);
+//    MySleep(50);
+//    m_MainWidget->updateReclaimStatus();
 }

 void InkJetPrinter::handleStopPrint()
 {
    sysPara->status.isPrinting = false;
-//    LogInfo::setRunStatusText("Stop print...");
+    sysPara->devOp->printCtrl2(1);
+    sysPara->devOp->printCtrl( PRINT_CTRL_STOP);
+    sysPara->status.waitHightVolOff = 1;
+    sysPara->saveParaToFile();					// 将相关配置保存
+    // 停止完毕后再进入就绪状态，允许开始打印
+    m_stateManager->requestTransition(PrinterEvent::StopComplete);
+//    MySleep(50);
+//    m_MainWidget->updateReclaimStatus();
 }

 void InkJetPrinter::handlePowerOff()
@@ -1903,101 +1856,40 @@ void InkJetPrinter::handlePowerOff()
    m_MainWidget->checkForPowerOff();
 }

-void InkJetPrinter::slt_stateTest()
-{
-    if (!m_stateManager) return;
-
-    PrinterState currentState = m_stateManager->currentState();
-
-    qDebug() << "=== Test Step:" << m_testStep << "Current:" << m_stateManager->stateName();
-
-    // 根据当前状态发送不同的事件
-    switch (currentState) {
-    case PrinterState::IDLE:
-        // IDLE → SELF_CHECK
-        qDebug() << "▶ Send: PowerOn";
-        m_stateManager->requestTransition(PrinterEvent::PowerOn);
-        break;
-
-    case PrinterState::SELF_CHECK:
-        // SELF_CHECK → READY
-        qDebug() << "▶ Send: SelfCheckDone";
-        m_stateManager->requestTransition(PrinterEvent::SelfCheckDone);
-        break;
-
-    case PrinterState::READY:
-        // READY → PRINTING
-        qDebug() << "▶ Send: StartPrint";
-        m_stateManager->requestTransition(PrinterEvent::StartPrint);
-        break;
-
-    case PrinterState::PRINTING:
-        // PRINTING → STOPPING → READY（两步完成）
-        if (m_testStep % 2 == 0) {
-            qDebug() << "▶ Send: StopPrint";
-            m_stateManager->requestTransition(PrinterEvent::StopPrint);
-        } else {
-            qDebug() << "▶ Send: StopComplete";
-            m_stateManager->requestTransition(PrinterEvent::StopComplete);
-        }
-        break;
-
-    case PrinterState::STOPPING:
-        // STOPPING → READY
-        qDebug() << "▶ Send: StopComplete";
-        m_stateManager->requestTransition(PrinterEvent::StopComplete);
-        break;
-
-    case PrinterState::ERROR:
-        // ERROR → READY
-        qDebug() << "▶ Send: ErrorCleared";
-        m_stateManager->requestTransition(PrinterEvent::ErrorCleared);
-        break;
-
-    case PrinterState::POWER_OFF:
-        // POWER_OFF → IDLE
-        qDebug() << "▶ Send: PowerOffDone";
-        m_stateManager->requestTransition(PrinterEvent::PowerOffDone);
-        break;
-
-    default:
-        break;
-    }
-
-    m_testStep++;
-}
-
 // ============ 状态机槽函数 ============
 void InkJetPrinter::slt_stateChanged(PrinterState newState, PrinterState oldState, QString reason)
 {
-    qDebug() << "State:" << m_stateManager->stateName() << "Reason:" << reason;
+    Q_UNUSED(oldState)
+    LogInfo::setRunStatusText(reason);

    // ============ 统一更新 sysPara 状态 ============
    switch (newState) {
    case PrinterState::SELF_CHECK:
-        // 进入自检状态
+        // 进入自检完成状态
        handleSelfCheck();
+        LogInfo::setRunStatusText("SELF_CHECK_DONE");
        break;

    case PrinterState::READY:
        // 进入就绪状态
        handleReady();
+        LogInfo::setRunStatusText("READY");
        break;

    case PrinterState::PRINTING:
        // 进入打印状态
        handleStartPrint();
+        LogInfo::setRunStatusText("PRINTING");
        break;

    case PrinterState::STOPPING:
        // 进入停止状态
        handleStopPrint();
+        LogInfo::setRunStatusText("STOPPING");
        break;

    case PrinterState::ERROR:
        // 进入故障状态
-//        m_MainWidget->setRunStatus("故障！请检查");
-//        m_MainWidget->enablePrintButton(false);
        break;

    case PrinterState::POWER_OFF:
@@ -2008,9 +1900,32 @@ void InkJetPrinter::slt_stateChanged(PrinterState newState, PrinterState oldStat
    default:
        break;
    }
+}

-    // 保存参数
-    //sysPara->saveParaToFile();
+void InkJetPrinter::slt_enableStartPrint(bool able)
+{
+    m_MainWidget->enabeleStartBtn(able);
+}
+
+void InkJetPrinter::slt_enableStopPrint(bool able)
+{
+    m_MainWidget->enabeleStopBtn(able);
+}
+
+// 排气过程中不使能
+void InkJetPrinter::slt_enableOpenTank(bool able)
+{
+    m_MainWidget->setReclaimOpenBtnStatus(able);
+}
+
+void InkJetPrinter::slt_enableCloseTank(bool able)
+{
+    m_MainWidget->setReclaimCloseBtnStatus(able);
+}
+
+void InkJetPrinter::slt_infoBox(QString msg)
+{
+    QMessageBox::information(this, tr("提示"), msg);
 }

 /*************************FPGA通过串口读取状态赋值给status-start******************************************/
@@ -2637,7 +2552,7 @@ void InkJetPrinter::autoControlViscosityPumpForSelfCheck(int selfCheckCnt)
        if(!sysPara->devOp->isViscosityPumpOpen()) {
            sysPara->devOp->controlViscosityPump(true);
            qDebug() << "Start test viscosity pump.";
-            LogInfo::setRunStatusText("Start test viscosity pump.");
+//            LogInfo::setRunStatusText("Start test viscosity pump.");
        }
    }

@@ -2645,7 +2560,7 @@ void InkJetPrinter::autoControlViscosityPumpForSelfCheck(int selfCheckCnt)
        if(sysPara->devOp->isViscosityPumpOpen()) {
            sysPara->devOp->controlViscosityPump(false);
            qDebug() << "Stop test viscosity pump.";
-            LogInfo::setRunStatusText("Stop test viscosity pump.");
+//            LogInfo::setRunStatusText("Stop test viscosity pump.");
        }
    }
 }
@@ -2768,60 +2683,47 @@ void InkJetPrinter::detectAndcontrolReclaimTank(){
        if(sysPara->devOp->isReclaimTankOpenEnable())
            sysPara->devOp->controlReclaimTankOpen(false);		//到头，关闭
        sysPara->status.reclainTankReachEnd = true;
-            m_MainWidget->setRunStatus(tr("回收槽到头"));
-            m_MainWidget->setReclaimStatus(true, 100);
-        m_MainWidget->enablePrintButton(true);			//仅仅在此时能使能打印按钮  
-            sysPara->devOp->highVoltageCtrl(0);
+        m_MainWidget->setRunStatus(tr("回收槽到头"));
+        sysPara->devOp->highVoltageCtrl(0);

-            m_MainWidget->stopFlashReclaimOpenBtn();
+        m_MainWidget->stopFlashReclaimOpenBtn();

-//        emit reclaimTankOpenDone();
-            /*回收槽开关时间校正*/
-            sysPara->para.reclaimTankTime =( sysPara->status.currReclaimTankPos>120 )? sysPara->status.currReclaimTankPos/10-1:12;
-            m_SystemSetting->updateReclaimTime( sysPara->para.reclaimTankTime );
+        /*回收槽开关时间校正*/
+        sysPara->para.reclaimTankTime =( sysPara->status.currReclaimTankPos>120 )? sysPara->status.currReclaimTankPos/10-1:12;
+        m_SystemSetting->updateReclaimTime( sysPara->para.reclaimTankTime );

-            qDebug()<<"reclaimTankOpenDone currReclaimTankPos:"<<sysPara->status.currReclaimTankPos;
-            qDebug()<<"reclaimTankOpenDone curr_reclaimTankTime:"<<sysPara->status.curr_reclaimTankTime;
-
-            LogInfo::setRunStatusText("reclaimTankOpenDone currReclaimTankPos:"+QString::number(sysPara->status.currReclaimTankPos));
+        LogInfo::setRunStatusText("reclaimTankOpenDone currReclaimTankPos:"+QString::number(sysPara->status.currReclaimTankPos));
    }
    else  if(sysPara->status.reclaimTankstatus == 0x11 )//7 故障，6 关完成，5开完成，4 保持， 3 停止， 2 关， 1 开，0-无操作
    {
        sysPara->devOp->controlReclaimTankOpen(false);		//卡住，关闭
        m_MainWidget->stopFlashReclaimOpenBtn();
-//        ui->tabMainWindow->setRunStatus(tr("回收槽卡住或者回收槽开关时间设置错误"));
+        //        ui->tabMainWindow->setRunStatus(tr("回收槽卡住或者回收槽开关时间设置错误"));
    }
    else  if(sysPara->status.reclaimTankstatus == 1 || sysPara->status.reclaimTankstatus == 2)//7 故障，6 关完成，5开完成，4 保持， 3 停止， 2 关， 1 开，0-无操作
    {
-        auto recliamTime = (sysPara->para.reclaimTankTime != 0 ? sysPara->para.reclaimTankTime : 15.0f) * 10.0f;
-        int rate = qBound(0, 100, int((sysPara->status.currReclaimTankPos / recliamTime) * 100));
+//        auto recliamTime = (sysPara->para.reclaimTankTime != 0 ? sysPara->para.reclaimTankTime : 15.0f) * 10.0f;
+//        int rate = qBound(0, 100, int((sysPara->status.currReclaimTankPos / recliamTime) * 100));

-        // 不知道为什么会有rate为0，且 sysPara->status.reclaimTankstatus == 2 ，也就是 关的状态。 回收槽位置在0处，而状态却是 关 ，很奇怪
-        if(sysPara->status.reclaimTankstatus != 2 && rate != 0) {
-            m_MainWidget->setReclaimStatus(sysPara->status.reclaimTankstatus == 1, rate);
+        if(sysPara->status.reclaimTankstatus != 2) {

-            #ifdef BNS_DEBUG
+#ifdef BNS_DEBUG
            if(rate == 100) {
                m_MainWidget->enablePrintButton(true);
                m_MainWidget->stopFlashReclaimOpenBtn();
                sysPara->status.reclaimTankstatus = 5;
            }
-            #endif
+#endif
        }

        m_MainWidget->setReclaimOpenBtnStatus(sysPara->status.reclaimTankstatus == 2);
        m_MainWidget->setReclaimCloseBtnStatus(sysPara->status.reclaimTankstatus == 1);
-
-        sysPara->status.reclaimBlockedCnt = 0;
    }
    else  if(sysPara->status.reclaimTankstatus == 6 )//7 故障，6 关完成，5开完成，4 保持， 3 停止， 2 关， 1 开，0-无操作
    {
        if(sysPara->devOp->isReclaimTankCloseEnable())
            sysPara->devOp->controlReclaimTankClose(false);		//到头，关闭
-        m_MainWidget->setReclaimStatus(false, 0);
        m_MainWidget->stopFlashReclaimOpenBtn();
-        //sysPara->status.currReclaimTankPos = 0;				//将回收槽的时间置为零
-//        emit reclaimTankCloseDone();
        sysPara->status.lastRecycleWarn = 0;
        sysPara->status.HVFaultCloseEn=0;
        sysPara->status.reclainCloseAppending=false;
@@ -2839,6 +2741,7 @@ void InkJetPrinter::detectAndcontrolReclaimTank(){
        m_MainWidget->setReclaimCloseBtnStatus(true);
        LogInfo::setRunStatusText("Reclaim tank hold on "+QString::number(sysPara->status.currReclaimTankPos));
    }
+
 }

 void InkJetPrinter::viscosity_timerHandler()
@@ -3007,7 +2910,7 @@ bool InkJetPrinter::loadWorkFileAndPreparePrint(const QString &filename)

    PrintSettingModel::applyToSysPara(model, sysPara);
    
-    ret = m_MainWidget->generatePrintContent(scene);
+    ret = m_MainWidget->generatePrintContent(scene, model);
    if(!ret) {
        LogInfo::setRunStatusText(QString("Failed to generate print content from work file: %1").arg(filename));
        delete scene;
@@ -3300,12 +3203,6 @@ void InkJetPrinter::initRFIDManager()
    connect(manager_rfid,SIGNAL(sig_maintenanceShow()),
            m_MainInstruction,SLOT(maintenanceDialogShow()));

-    auto checkReclaimOpenBtn = [this]() {
-        // if(sysPara->status.selfCheckDone && (sysPara->status.reclaimTankstatus == 2 || sysPara->status.reclaimTankstatus == 6)) {
-        //     m_MainWidget->setReclaimOpenBtnStatus(true);
-        // }
-    };
-
    connect(manager_rfid, &RFIDManager::sig_inkCardProgressFinished, this, [this](){
        sysPara->RFIDPara.needInkCard = false;
        sysPara->saveRFIDPara();
@@ -3333,7 +3230,8 @@ void InkJetPrinter::initRFIDManager()


 #define MAX_WARNING_TIME_HOUR 48
-#define WARNING_INTERVAL_SEC 3600
+//#define WARNING_INTERVAL_SEC 3600
+#define WARNING_INTERVAL_SEC 10

 #ifdef BNS_DEBUG

@@ -3369,6 +3267,39 @@ void InkJetPrinter::resetRFIDStatus()
    QMessageBox::information(this, "", "RFID progress has been cleaned.", QMessageBox::Ok);
 }

+void InkJetPrinter::slt_close(bool height)
+{
+    QString str = "";
+    if (height) {
+        str = tr("粘度过高,即将关闭喷嘴");
+    } else {
+        str = tr("粘度过低,即将关闭喷嘴");
+    }
+    if (sysPara && sysPara->status.selfCheckDone) {
+        QMessageBox::warning(this, tr("警告"), str);
+        if (sysPara->status.reclainTankReachEnd || sysPara->status.reclaimTankstatus == 1) {
+            // 关闭喷嘴
+            m_MainWidget->on_m_LeftBtn_clicked();
+        }
+    }
+
+    return;
+}
+
+void InkJetPrinter::slt_alert(bool height)
+{
+    QString str = "";
+    if (height) {
+        str = tr("粘度较高,请注意调整粘度");
+    } else {
+        str = tr("粘度较低,请注意调整粘度");
+    }
+    if (sysPara && sysPara->status.selfCheckDone)
+        QMessageBox::information(this, tr("提示"), str);
+
+    return;
+}
+
 /**
 * @brief 处理墨水警告
 * 如果发生墨水警告，则进入 加墨水&刷卡 流程。
@@ -3403,11 +3334,16 @@ void InkJetPrinter::handleWarnInk()
            if(sysPara->RFIDPara.needInkCard) {
                slt_showMsg(tr("请及时使用墨水盒附带的IC卡激活墨水盒"));
            }
+            m_MainWidget->powerOnWarn = false;
        }
    }

    // 墨水盒空，进入 刷卡&加墨水 流程
    if(sysPara->status.inkWarningCnt >= DETECT_WARNING_TIME && sysPara->RFIDPara.inInkAndRFIDProgress == 0) {
+        // 只处理自检期间出现的问题
+        if (!sysPara->status.selfCheckDone) {
+            m_MainWidget->powerOnWarn = true;
+        }

        sysPara->RFIDPara.addedInk = false;
        sysPara->RFIDPara.needInkCard = true;
@@ -3474,10 +3410,23 @@ void InkJetPrinter::handleWarnInk()

            // 理论上differHours只会比 sysPara->status.showInkWarningNumber 大 1， 如果大于1，说明系统时间被被往后修改过或者关过机。

-            if(differHours > MAX_WARNING_TIME_HOUR)
-                slt_showMsg(tr("墨水液位报警超过%1小时,机器无法正常打印,请先添加原厂墨水再刷墨水卡,以恢复喷码机的正常工作!").arg(MAX_WARNING_TIME_HOUR));
-            else 
-                slt_showMsg(tr("请刷墨水卡,请使用原厂墨水耗材,否则机器将在%1小时后禁止使用!").arg(MAX_WARNING_TIME_HOUR - differHours));
+            if(differHours > MAX_WARNING_TIME_HOUR) {
+                slt_showMsg(tr("墨水液位报警超过%1小时,机器无法正常打印,请添加墨水并刷卡.").arg(MAX_WARNING_TIME_HOUR));
+            }
+            else {
+                // 累计 3 小时未补充，自动关喷嘴
+                if ((differHours > 0 && differHours % 3 == 0)
+                        && differHours < MAX_WARNING_TIME_HOUR
+                        && (sysPara->status.statWarn & WARN_STATUS_INK_WARN)) {
+                    slt_showMsg(tr("墨水告警已累计3小时，自动关喷嘴。"));
+                    if (sysPara->status.isPrinting)
+                        m_MainWidget->on_m_StopBtn_clicked();
+                    if (sysPara->status.reclaimTankstatus != 2)
+                        m_MainWidget->on_m_LeftBtn_clicked();
+                } else {
+                    slt_showMsg(tr("请刷墨水卡,请使用原厂墨水耗材,否则机器将在%1小时后禁止使用!").arg(MAX_WARNING_TIME_HOUR - differHours));
+                }
+            }

            sysPara->status.showInkWarningNumber = differHours;
            sysPara->saveRFIDPara();
@@ -3530,11 +3479,17 @@ void InkJetPrinter::handleWarnSolvent()
            if(sysPara->RFIDPara.needSolventCard) {
                slt_showMsg(tr("请及时使用溶剂盒附带的IC卡激活溶剂盒"));
            }
+            m_MainWidget->powerOnWarn = false;
        }
    }

    // 溶剂盒空，进入 刷卡&加溶剂 流程
    if(sysPara->status.solventWarningCnt >= DETECT_WARNING_TIME && sysPara->RFIDPara.inSolventAndRFIDProgress == 0) {
+        // 只处理自检期间出现的问题
+        if (!sysPara->status.selfCheckDone) {
+            m_MainWidget->powerOnWarn = true;
+        }
+
        QDateTime curDateTime = QDateTime::currentDateTime();
        QString strCurDateTime = curDateTime.toString("yyMMddhhmmss");
        LogInfo::setRunStatusText("Solvent warning.");
@@ -3593,10 +3548,22 @@ void InkJetPrinter::handleWarnSolvent()
        }

        if(differHours > sysPara->status.showSolventWarningNumber) {
-            if(differHours > MAX_WARNING_TIME_HOUR) 
-                slt_showMsg(tr("溶剂液位报警超过%1小时,机器无法正常打印,请先添加溶剂再刷溶剂卡以恢复喷码机的正常工作!").arg(MAX_WARNING_TIME_HOUR));
-            else 
-                slt_showMsg(tr("请刷溶剂卡,请使用原厂溶剂耗材,否则机器将在%1小时后禁止使用!").arg(MAX_WARNING_TIME_HOUR - differHours));
+            if(differHours > MAX_WARNING_TIME_HOUR) {
+                slt_showMsg(tr("溶剂液位报警超过%1小时,机器无法正常打印,请添加溶剂并刷卡.").arg(MAX_WARNING_TIME_HOUR));
+            }else {
+                // 累计 3 小时未补充，自动关喷嘴
+                if ((differHours > 0 && differHours % 3 == 0)
+                        && differHours < MAX_WARNING_TIME_HOUR
+                        && (sysPara->status.statWarn & WARN_STATUS_SOLV_WARN)) {
+                    slt_showMsg(tr("溶剂告警已累计3小时，自动关喷嘴。"));
+                    if (sysPara->status.isPrinting)
+                        m_MainWidget->on_m_StopBtn_clicked();
+                    if (sysPara->status.reclaimTankstatus != 2)
+                        m_MainWidget->on_m_LeftBtn_clicked();
+                } else {
+                    slt_showMsg(tr("请刷溶剂卡,请使用原厂溶剂耗材,否则机器将在%1小时后禁止使用!").arg(MAX_WARNING_TIME_HOUR - differHours));
+                }
+            }

            sysPara->status.showSolventWarningNumber = differHours;
            sysPara->saveRFIDPara();
@@ -3610,7 +3577,8 @@ void InkJetPrinter::handleWarnSolvent()
    }

    // 如果用户已经刷了溶剂卡，并且加了溶剂，则清除 刷卡&加溶剂 流程
-    if(sysPara->RFIDPara.addedSolvent && !sysPara->RFIDPara.needSolventCard && sysPara->RFIDPara.inSolventAndRFIDProgress != 0) {
+    if(sysPara->RFIDPara.addedSolvent && !sysPara->RFIDPara.needSolventCard
+            && sysPara->RFIDPara.inSolventAndRFIDProgress != 0) {
        sysPara->status.showSolventWarningNumber = 0;
        sysPara->RFIDPara.inSolventAndRFIDProgress = 0;
        sysPara->RFIDPara.solventCardTimeOut = false;
@@ -170,6 +170,9 @@ private:
 private slots:

    void resetRFIDStatus();
+    // 粘度告警
+    void slt_close(bool);
+    void slt_alert(bool);

    void onDlgFileOpen(const QString& filename);

@@ -234,7 +237,7 @@ private slots:

    void OnFinished(int event);

-    void slt_editCounter(CounterViewModel vm);
+    void slt_editCounter(CounterViewModel vm, bool isChange);

    // 保养警告
    void slt_warningMaintenance();
@@ -284,18 +287,17 @@ private:
    bool gearPumpStartFlag = false;


-    // 状态机
+    // ===================状态机====================
    PrinterStateManager* m_stateManager = nullptr;
-    // 测试定时器
-    QTimer* m_testTimer = nullptr;
-    int m_testStep = 0;
 private:
    void initStateManager();
-    void initStateTimer();
    // 不同状态的处理
    // 自检
    void handleSelfCheck();

+    // 自检完成
+    void handleToReady();
+
    // 就绪
    void handleReady();

@@ -306,7 +308,14 @@ private:
    // 关机
    void handlePowerOff();
 private slots:
-    void slt_stateTest();
+    // 切换状态
    void slt_stateChanged(PrinterState newState, PrinterState oldState, QString reason);

+    // 使能开始打印、停止打印、开回收槽、关回收槽按钮
+    void slt_enableStartPrint(bool);
+    void slt_enableStopPrint(bool);
+    void slt_enableOpenTank(bool);
+    void slt_enableCloseTank(bool);
+    // 处理告警
+    void slt_infoBox(QString);
 };
@@ -84,6 +84,7 @@ MainInstruction::~MainInstruction()

 void MainInstruction::bindSysPara(SysPara *sysPara){
    this->sysPara = sysPara;
+    initDlgVis();
 }

 void MainInstruction::onGraphicsEditBtnClicked()
@@ -189,7 +190,7 @@ void MainInstruction::ondialogAuthorizationAccepted(){
    } else {
        QMessageBox box(QMessageBox::Warning, tr("警告"),
                tr("密码错误:%1").arg(authString), QMessageBox::Ok,
-                this);
+                0);
        box.exec();
    }
 }
@@ -424,4 +425,23 @@ void MainInstruction::applyStyleSheet()
            )";

    this->setStyleSheet(styleSheet);
-}
+}
+void MainInstruction::on_visSetBtn_clicked()
+{
+    initDlgVis();
+    if (dlgVisSetting)
+        dlgVisSetting->show();
+}
+
+
+void MainInstruction::initDlgVis()
+{
+    if (dlgVisSetting == nullptr) {
+        dlgVisSetting = new DlgViscositySetting(this);
+        dlgVisSetting->bindSysPara(sysPara);
+        connect(dlgVisSetting, &DlgViscositySetting::sig_alert,
+                this, &MainInstruction::sig_alert);
+        connect(dlgVisSetting, &DlgViscositySetting::sig_close,
+                this, &MainInstruction::sig_close);
+    }
+}
@@ -11,6 +11,7 @@
 #include "dialogmaintenancetimesetting.h"
 #include "LogInfo.h"
 #include "TimeSettingDialog.h"
+#include "dlgviscositysetting.h"

 class DlgRFIDConfig;
 class DlgCanvasHeightEditor;
@@ -30,7 +31,7 @@ public:

    void bindSysPara(SysPara *SysPara);

-     DlgInputAddr *dlgInputAddr;
+    DlgInputAddr *dlgInputAddr;

 signals:
    void sendButtonClickedSignal(int index);
@@ -38,6 +39,8 @@ signals:

    void superJmAccepted();

+    void sig_close(bool);
+    void sig_alert(bool);
 private slots:
    void onGraphicsEditBtnClicked();

@@ -60,6 +63,7 @@ private slots:

    void onCanvasCfgBtnClicked();

+    void on_visSetBtn_clicked();
 private:
    Ui::MainInstruction *ui;
    SysPara* sysPara = nullptr;
@@ -75,6 +79,10 @@ private:
    // 时间设置
    TimeSettingDialog timeDia;

+    //粘度预警界面
+    DlgViscositySetting* dlgVisSetting = nullptr;
+    void initDlgVis();
+
    void applyStyleSheet();    // 应用样式表
 };

@@ -98,7 +98,7 @@
    </rect>
   </property>
   <property name="currentIndex">
-    <number>0</number>
+    <number>2</number>
   </property>
   <widget class="QWidget" name="tabBasic">
    <attribute name="title">
@@ -304,6 +304,19 @@
      <string>窗口点阵设置</string>
     </property>
    </widget>
+    <widget class="QPushButton" name="visSetBtn">
+     <property name="geometry">
+      <rect>
+       <x>310</x>
+       <y>230</y>
+       <width>254</width>
+       <height>92</height>
+      </rect>
+     </property>
+     <property name="text">
+      <string>粘度设置</string>
+     </property>
+    </widget>
   </widget>
  </widget>
  <widget class="QPushButton" name="closeBtn">
@@ -217,7 +217,7 @@ QScrollBar::add-line:horizontal { bottom: 0px; }</string>
           <x>0</x>
           <y>0</y>
           <width>780</width>
-           <height>177</height>
+           <height>169</height>
          </rect>
         </property>
        </widget>
@@ -255,7 +255,7 @@ QScrollBar::add-line:horizontal { bottom: 0px; }</string>
              <property name="minimumSize">
               <size>
                <width>150</width>
-                <height>130</height>
+                <height>128</height>
               </size>
              </property>
              <property name="maximumSize">
@@ -439,7 +439,7 @@ QScrollBar::add-line:horizontal { bottom: 0px; }</string>
              <property name="minimumSize">
               <size>
                <width>0</width>
-                <height>130</height>
+                <height>128</height>
               </size>
              </property>
              <property name="maximumSize">
@@ -124,7 +124,7 @@ void MyInputMethod::updateHandler ( int type ){
    switch(type){
    case 0:break;
    case 1:
-			if(widget && (dynamic_cast<QSpinBox *>(widget))){
+			if(widget && (dynamic_cast<QSpinBox *>(widget) || dynamic_cast<QDoubleSpinBox *>(widget))){
 				if(digitalInput->isHidden()){
                    QWidget *hostWindow = widget->window();
 					QRect rec = QApplication::desktop()->screenGeometry();
@@ -0,0 +1,111 @@
+#include "PressureMonitor.h"
+#include <cmath>
+
+PressureMonitor::PressureMonitor()
+    : m_tickCounter(0)
+    , m_sampleCount(0)
+    , m_bufIdx(0)
+    , m_totalTickCount(0)
+    , m_timeout(false)
+{
+    for (int i = 0; i < BUF_SIZE; i++) {
+        m_buf[i] = 0.0f;
+    }
+}
+
+bool PressureMonitor::tick(float realtimePressure, float calibratedPressure)
+{
+    m_totalTickCount++;
+
+    if (m_totalTickCount >= TIMEOUT_TICKS) {
+        m_timeout = true;
+        return true;
+    }
+
+    if (m_tickCounter != 0) {
+        m_tickCounter = (m_tickCounter + 1) % SAMPLE_INTERVAL_TICKS;
+        return false;
+    }
+    m_tickCounter = (m_tickCounter + 1) % SAMPLE_INTERVAL_TICKS;
+
+    if (calibratedPressure <= 0.0f) {
+        return false;
+    }
+
+    m_buf[m_bufIdx] = realtimePressure;
+    m_bufIdx = (m_bufIdx + 1) % BUF_SIZE;
+    m_sampleCount++;
+
+    if (m_sampleCount < BUF_SIZE) {
+        return false;
+    }
+
+    float rangeMin = calibratedPressure - 10.0f;
+    float rangeMax = calibratedPressure + 10.0f;
+
+    if (!checkFirst4InRange(rangeMin, rangeMax)) {
+        return false;
+    }
+
+    float avg = computeTrimmedMean();
+    return (avg >= rangeMin && avg <= rangeMax);
+}
+
+void PressureMonitor::reset()
+{
+    m_tickCounter = 0;
+    m_sampleCount = 0;
+    m_bufIdx = 0;
+    m_totalTickCount = 0;
+    m_timeout = false;
+    for (int i = 0; i < BUF_SIZE; i++) {
+        m_buf[i] = 0.0f;
+    }
+}
+
+bool PressureMonitor::isCurrentlyInRange() const
+{
+    return (m_sampleCount >= BUF_SIZE);
+}
+
+int PressureMonitor::stableTickCount() const
+{
+    return m_sampleCount;
+}
+
+bool PressureMonitor::wasTimeout() const
+{
+    return m_timeout;
+}
+
+const float* PressureMonitor::buffer() const
+{
+    return m_buf;
+}
+
+bool PressureMonitor::checkFirst4InRange(float rangeMin, float rangeMax) const
+{
+    for (int i = 0; i < 4; i++) {
+        float val = m_buf[(m_bufIdx + i) % BUF_SIZE];
+        if (val < rangeMin || val > rangeMax) {
+            return false;
+        }
+    }
+    return true;
+}
+
+float PressureMonitor::computeTrimmedMean() const
+{
+    float minVal = m_buf[0];
+    float maxVal = m_buf[0];
+    float sum = 0.0f;
+
+    for (int i = 0; i < BUF_SIZE; i++) {
+        float val = m_buf[i];
+        sum += val;
+        if (val < minVal) minVal = val;
+        if (val > maxVal) maxVal = val;
+    }
+
+    return (sum - minVal - maxVal) / (float)(BUF_SIZE - 2);
+}
@@ -0,0 +1,47 @@
+#ifndef PRESSUREMONITOR_H
+#define PRESSUREMONITOR_H
+
+class PressureMonitor
+{
+public:
+    PressureMonitor();
+
+    // 每个100ms tick 调用一次（外部调用频率不变）
+    // realtimePressure: 实时压力 (sysPara->status.PRESSURE)
+    // calibratedPressure: 标定压力 (sysPara->para.pressure)
+    //
+    // 内部逻辑：每500ms采样一次，维护最近12个采样的环形缓冲区。
+    // 缓冲区满12个后，先检查最旧的4个采样是否各自在标定值 ±10 范围内，
+    // 满足后去掉全部12个中的最大值和最小值取平均，判断均值是否在 ±10 内。
+    // 每次新采样入队、最旧采样出队后立即重新判定。
+    // 返回 true 表示：
+    //   1) 前4入界且去极值均值在 ±10 范围内，或
+    //   2) 超过 2 分钟仍未稳定，兜底超时结束
+    bool tick(float realtimePressure, float calibratedPressure);
+
+    void reset();
+
+    bool isCurrentlyInRange() const;
+    int stableTickCount() const;
+    bool wasTimeout() const;
+
+    // 返回环形缓冲区（12个压力值）
+    const float* buffer() const;
+
+private:
+    float computeTrimmedMean() const;
+    bool checkFirst4InRange(float rangeMin, float rangeMax) const;
+
+    static const int SAMPLE_INTERVAL_TICKS = 5;  // 500ms / 100ms
+    static const int BUF_SIZE = 12;               // 缓冲区大小
+    static const int TIMEOUT_TICKS = 1200;        // 2分钟 / 100ms
+
+    int m_tickCounter;        // 100ms tick 计数，==0 时采样
+    int m_sampleCount;        // 已采集样本总数
+    int m_bufIdx;             // 环形缓冲区下一次写入位置
+    float m_buf[12];          // 环形缓冲区
+    int m_totalTickCount;     // 超时用总 tick 计数
+    bool m_timeout;           // 是否已超时
+};
+
+#endif // PRESSUREMONITOR_H
@@ -296,7 +296,8 @@ void PrintTextDisplay::paintEvent(QPaintEvent *event){
                    if(val>base-1)jmin=Num-j-1;
                    base *= 10;
                }
-                str= QString("%1").arg(val%base,Num,10,QLatin1Char('0'))+str;
+                int r = (base != 0) ? (val % base) : 0;
+                str= QString("%1").arg(r,Num,10,QLatin1Char('0'))+str;
            }


@@ -89,6 +89,14 @@ void PrintSetting::init()
        if(b)
            on_radioButtonSynTriggerExternal_clicked();
    });
+
+    connect(ui->dsb_diameter, QOverload<double>::of(&QDoubleSpinBox::valueChanged), this, [this](double v){
+        updateTriggerPPM();
+    });
+
+    connect(ui->dsb_pulsePerCycle, QOverload<double>::of(&QDoubleSpinBox::valueChanged), this, [this](double v){
+        updateTriggerPPM();
+    });
 }

 extern void MySleep(unsigned int msec);
@@ -124,8 +132,13 @@ void PrintSetting::updateModelFromUI(){
    m_model.eleEyeTriggerPrintDelay = ui->spinBoxEleEyeTriggerPrintDelay->value();
    m_model.timeTriggerPrintMode = 0;
    m_model.triggerInterval = ui->spinBoxEleEyeTriggerIntervalMs->value();
+
+    updateTriggerPPM();
    m_model.encoderPulsePerMm = ui->lineEditTriggerPulsePerMm->text().toFloat();

+    m_model.encoderDiameter = ui->dsb_diameter->value();
+    m_model.encoderPulsePerCycle = ui->dsb_pulsePerCycle->value();
+
    if(ui->eleEyeEdgetTriggerExternal->isChecked() && ui->radioButtonSynTriggerExternal->isChecked()) {
        m_model.triggerMode = ui->radioButtonEleEyeEdgetTrigger->isChecked() ? PRINT_TRIGGER_ELEC_EYE_EDGE : PRINT_TRIGGER_ELEC_EYE_VOLTATE_LEVEL;
    }
@@ -215,7 +228,16 @@ void PrintSetting::TriggerupdateModelToUI()
    ui->spinBoxEleEyeTriggerRepeatCnt->setValue(m_model.eleEyeRepeatCnt);

    ui->spinBoxSynTriggerPrintLen->setText(QString::number(m_model.triggerInterval));
-    ui->lineEditTriggerPulsePerMm->setText(QString::number((double)m_model.encoderPulsePerMm));
+    
+    auto b = ui->dsb_diameter->blockSignals(true);
+    ui->dsb_diameter->setValue(m_model.encoderDiameter);
+    ui->dsb_diameter->blockSignals(b);
+
+    b = ui->dsb_pulsePerCycle->blockSignals(true);
+    ui->dsb_pulsePerCycle->setValue(m_model.encoderPulsePerCycle);
+    ui->dsb_pulsePerCycle->blockSignals(b);
+
+    updateTriggerPPM();

    ui->comboBoxEleEyeMakeClean->setCurrentIndex(0);

@@ -241,10 +263,10 @@ void PrintSetting::TriggerupdateModelToUI()
 void PrintSetting::updateSysStatusToUI(){
 }

-void PrintSetting::on_pushButtonApplyPulseFix_clicked()
+void PrintSetting::updateTriggerPPM()
 {
-    float circle = ui->lineEditDiameter->text().toFloat() * 3.1415926;
-    float pulseNum = ui->lineEditPulsePerCycle->text().toFloat();
+    double circle = ui->dsb_diameter->value() * 3.1415926;
+    double pulseNum = ui->dsb_pulsePerCycle->value();
    if(circle != 0){
        auto pulseNumPerMM = 4*pulseNum/circle; //电路和Fpga做了4倍频处理，这里乘以4是为了匹配4倍频的处理进行正确的显示
        m_model.encoderPulsePerMm = pulseNumPerMM;
@@ -252,15 +274,6 @@ void PrintSetting::on_pushButtonApplyPulseFix_clicked()
        ui->lineEditTriggerPulsePerMm->setText(QString::number(pulseNumPerMM));
        ui->lineEditTriggerPulsePerMm->blockSignals(b);
    }
-
-    return;
-
-    if(!sysPara)
-        return;
-
-    pulseNumFix->bindSysPara(sysPara);
-    pulseNumFix->hide();
-    pulseNumFix->show();
 }

 void PrintSetting::onPulseNumFixDone(float value){
@@ -304,16 +317,6 @@ void PrintSetting::on_radioButtonEleEyeLevelTrigger_pressed()
 void PrintSetting::on_radioButtonSynTrigger_pressed()
 {
    setTriggerUI(PRINT_TRIGGER_SYNCHRONIZER);
-    //edit@11-19
-    //    const unsigned short &FpgaVer=sysPara->status.build_dat.builTime;
-    //    //72版本禁用字符宽度
-    //    if(72 == FpgaVer){
-    //        ui->spinBoxSynTriggerPrintLenRatio->setValue(0);
-    //        ui->spinBoxSynTriggerPrintLenRatio->setEnabled(0);
-    //    }else if (67 == FpgaVer)
-    //        ui->spinBoxSynTriggerPrintLenRatio->setEnabled(1);
-    //    emit synDisableFontWidth(true);
-
 }

 void PrintSetting::on_checkEyeTriggerSynPrintEn_clicked(bool checked)
@@ -327,16 +330,6 @@ void PrintSetting::on_checkEyeTriggerSynPrintEn_clicked(bool checked)
 #ifndef NON_CABLE
            // ui->spinBoxSynTriggerPrintLen->setEnabled(1);
 #endif
-            // ui->labelSynTriggerPrintLen->setEnabled(1);
-            // ui->lineEditTriggerPulsePerMm->setEnabled(1);
-            // ui->labelTriggerPulsePerMm->setEnabled(1);
-            // ui->spinBoxSynTriggerPrintLenRatio->setEnabled(1);
-            // ui->labelSynTriggerPrintLenRatio->setEnabled(1);
-            // ui->checkBoxEleEyeMakeClean->setEnabled(1);
-            // ui->pushButtonApplyPulseFix->setEnabled(1);
-            // ui->comboBoxSynPrintMode->setEnabled(1);
-            // ui->labelSynPrintMode->setEnabled(1);
-            // ui->spinBoxEleEyeTriggerIntervalMs->setEnabled(0);
            ui->labelEleEyeTriggerPrintDelay->setText(tr("触发延时(毫米)"));
            ui->labelEleEyeTriggerIntervalMs->setText(tr("重复间隔(毫米)"));
            ui->labelEleMaskTime->setText(tr("抑止距离(毫米)"));
@@ -351,16 +344,6 @@ void PrintSetting::on_checkEyeTriggerSynPrintEn_clicked(bool checked)
 #ifndef NON_CABLE
            // ui->spinBoxSynTriggerPrintLen->setEnabled(triggerMode == PRINT_TRIGGER_SYNCHRONIZER);
 #endif
-            // ui->labelSynTriggerPrintLen->setEnabled(triggerMode == PRINT_TRIGGER_SYNCHRONIZER);
-            // ui->lineEditTriggerPulsePerMm->setEnabled(triggerMode == PRINT_TRIGGER_SYNCHRONIZER);
-            // ui->labelTriggerPulsePerMm->setEnabled(triggerMode == PRINT_TRIGGER_SYNCHRONIZER);
-            // ui->spinBoxSynTriggerPrintLenRatio->setEnabled(triggerMode == PRINT_TRIGGER_SYNCHRONIZER);
-            // ui->labelSynTriggerPrintLenRatio->setEnabled(triggerMode == PRINT_TRIGGER_SYNCHRONIZER);
-            // ui->checkBoxEleEyeMakeClean->setEnabled(triggerMode == PRINT_TRIGGER_SYNCHRONIZER);
-            // ui->pushButtonApplyPulseFix->setEnabled(triggerMode == PRINT_TRIGGER_SYNCHRONIZER);
-            // ui->comboBoxSynPrintMode->setEnabled(triggerMode == PRINT_TRIGGER_SYNCHRONIZER);
-            // ui->labelSynPrintMode->setEnabled(triggerMode == PRINT_TRIGGER_SYNCHRONIZER);
-            // ui->spinBoxEleEyeTriggerIntervalMs->setEnabled(1);
            ui->labelEleEyeTriggerPrintDelay->setText(tr("触发延时(毫秒)"));
            ui->labelEleEyeTriggerIntervalMs->setText(tr("重复间隔(毫秒)"));
            ui->labelEleMaskTime->setText(tr("抑止距离(毫秒)"));
@@ -602,8 +585,8 @@ void PrintSetting::on_eleEyeEdgetTriggerExternal_clicked()
 void PrintSetting::setEnableSynTriggerSetting(bool flag){

    // ui->labelTriggerPulsePerMm->setEnabled(flag);
-    ui->lineEditTriggerPulsePerMm->setEnabled(flag);
-    ui->pushButtonApplyPulseFix->setEnabled(flag);
+    ui->lineEditTriggerPulsePerMm->setEnabled(false);
+    // ui->pushButtonApplyPulseFix->setEnabled(flag);
    // ui->labelSynTriggerPrintLen->setEnabled(flag);
    ui->spinBoxSynTriggerPrintLen->setEnabled(flag);
    ui->comboBoxSyncActType->setEnabled(flag);
@@ -732,6 +715,8 @@ void PrintSettingModel::loadFromXml(PrintSettingModel& model, const QXmlStreamAt
    model.unlimitedRepeat = attrs.value("unlimitedRepeat").toInt() != 0;
    model.triggerMode = attrs.value("triggerMode").toUInt();
    model.encoderPulsePerMm = attrs.value("encoderPulsePerMm").toFloat();
+    model.encoderDiameter = attrs.value("encoderDiameter").toDouble();
+    model.encoderPulsePerCycle = attrs.value("encoderPulsePerCycle").toDouble();
    model.printColDelay = attrs.value("printColDelay").toUInt();
    model.volParaIndex = (unsigned short)attrs.value("volParaIndex").toUInt();
    model.eleEyeTriggerPrintDelay = (unsigned short)attrs.value("eleEyeTriggerPrintDelay").toUInt();
@@ -773,6 +758,8 @@ void PrintSettingModel::saveToXml(const PrintSettingModel& model, QXmlStreamWrit
    writer.writeAttribute("unlimitedRepeat", QString::number(model.unlimitedRepeat));
    writer.writeAttribute("triggerMode", QString::number(model.triggerMode));
    writer.writeAttribute("encoderPulsePerMm", QString::number((double)model.encoderPulsePerMm));
+    writer.writeAttribute("encoderPulsePerCycle", QString::number(model.encoderPulsePerCycle));
+    writer.writeAttribute("encoderDiameter", QString::number(model.encoderDiameter));
    writer.writeAttribute("printColDelay", QString::number(model.printColDelay));
    writer.writeAttribute("volParaIndex", QString::number(model.volParaIndex));
    writer.writeAttribute("eleEyeTriggerPrintDelay", QString::number(model.eleEyeTriggerPrintDelay));
@@ -42,6 +42,10 @@ struct PrintSettingModel

    float encoderPulsePerMm = 40;     // 编码器的每毫米脉冲数

+    double encoderDiameter = 10;    // 编码器的直径，单位毫米
+
+    double encoderPulsePerCycle = 5000;  // 编码器每圈的脉冲数
+
    unsigned printColDelay = 6;     // 打印列延迟，（字宽）

    unsigned short volParaIndex = 0;  // 喷印模式的索引, 决定选择哪组电压参数
@@ -145,7 +149,7 @@ public:
 private slots:
    void buttonClickedSlot();

-    void on_pushButtonApplyPulseFix_clicked();
+    void updateTriggerPPM();

    void onPulseNumFixDone(float);

@@ -592,6 +592,9 @@
      </item>
      <item row="0" column="1">
       <widget class="QLineEdit" name="lineEditTriggerPulsePerMm">
+        <property name="enabled">
+         <bool>false</bool>
+        </property>
        <property name="sizePolicy">
         <sizepolicy hsizetype="Preferred" vsizetype="Preferred">
          <horstretch>0</horstretch>
@@ -816,19 +819,6 @@
      <set>Qt::AlignRight|Qt::AlignTrailing|Qt::AlignVCenter</set>
     </property>
    </widget>
-    <widget class="QLineEdit" name="lineEditDiameter">
-     <property name="geometry">
-      <rect>
-       <x>400</x>
-       <y>220</y>
-       <width>161</width>
-       <height>31</height>
-      </rect>
-     </property>
-     <property name="inputMethodHints">
-      <set>Qt::ImhNone</set>
-     </property>
-    </widget>
    <widget class="QLabel" name="labelDiameter">
     <property name="geometry">
      <rect>
@@ -861,49 +851,57 @@
      <set>Qt::AlignRight|Qt::AlignTrailing|Qt::AlignVCenter</set>
     </property>
    </widget>
-    <widget class="QLineEdit" name="lineEditPulsePerCycle">
+    <widget class="CustomDoubleSpinBox" name="dsb_pulsePerCycle">
     <property name="geometry">
      <rect>
       <x>400</x>
       <y>170</y>
-       <width>161</width>
+       <width>171</width>
       <height>31</height>
      </rect>
     </property>
-     <property name="inputMethodHints">
-      <set>Qt::ImhNone</set>
+     <property name="buttonSymbols">
+      <enum>QAbstractSpinBox::NoButtons</enum>
+     </property>
+     <property name="decimals">
+      <number>10</number>
+     </property>
+     <property name="minimum">
+      <double>1.000000000000000</double>
+     </property>
+     <property name="maximum">
+      <double>10000000.000000000000000</double>
+     </property>
+     <property name="singleStep">
+      <double>100.000000000000000</double>
+     </property>
+     <property name="value">
+      <double>5000.000000000000000</double>
     </property>
    </widget>
-    <widget class="QPushButton" name="pushButtonApplyPulseFix">
+    <widget class="CustomDoubleSpinBox" name="dsb_diameter">
     <property name="geometry">
      <rect>
       <x>400</x>
-       <y>260</y>
-       <width>161</width>
-       <height>37</height>
+       <y>220</y>
+       <width>171</width>
+       <height>31</height>
      </rect>
     </property>
-     <property name="sizePolicy">
-      <sizepolicy hsizetype="Minimum" vsizetype="Preferred">
-       <horstretch>0</horstretch>
-       <verstretch>0</verstretch>
-      </sizepolicy>
+     <property name="buttonSymbols">
+      <enum>QAbstractSpinBox::NoButtons</enum>
     </property>
-     <property name="minimumSize">
-      <size>
-       <width>150</width>
-       <height>0</height>
-      </size>
+     <property name="decimals">
+      <number>10</number>
     </property>
-     <property name="layoutDirection">
-      <enum>Qt::LeftToRight</enum>
+     <property name="minimum">
+      <double>5.000000000000000</double>
     </property>
-     <property name="text">
-      <string>脉冲数修正</string>
+     <property name="maximum">
+      <double>10000.000000000000000</double>
     </property>
-     <property name="icon">
-      <iconset resource="image.qrc">
-       <normaloff>:/icon/pulse.png</normaloff>:/icon/pulse.png</iconset>
+     <property name="value">
+      <double>100.000000000000000</double>
     </property>
    </widget>
   </widget>
@@ -1484,6 +1482,11 @@
    <signal>pressed()</signal>
   </slots>
  </customwidget>
+  <customwidget>
+   <class>CustomDoubleSpinBox</class>
+   <extends>QDoubleSpinBox</extends>
+   <header>CustomDoubleSpinBox.h</header>
+  </customwidget>
 </customwidgets>
 <resources>
  <include location="image.qrc"/>
@@ -96,6 +96,7 @@ HEADERS +=  Public.h \
 #    ParaSettingUI.h \
    DevOp.h \
    posix_qextserialport.h \
+    PressureMonitor.h \
    rfid/sm4.h \
    rfid/sm3.h \
    rfid/rfidfunction.h \
@@ -184,7 +185,9 @@ HEADERS +=  Public.h \
    runtimectrl.h \
    dump.h \
    DlgCanvasHeightEditor.h \
-    StateMachine/PrinterStateManager.h
+    StateMachine/PrinterStateManager.h \
+    CustomDoubleSpinBox.h \
+    dlgviscositysetting.h


 FORMS += \
@@ -234,7 +237,8 @@ FORMS += \
    scene/DlgBarcodeFormat.ui \
    scene/DlgQrcodeFormat.ui \
    dlgQrCode.ui \
-    DlgCanvasHeightEditor.ui
+    DlgCanvasHeightEditor.ui \
+    dlgviscositysetting.ui

 SOURCES +=\
    mainwidget.cpp \
@@ -253,6 +257,7 @@ SOURCES +=\
 #    ParaSettingUI.cpp \
    DevOp.cpp \
    posix_qextserialport.cpp \
+    PressureMonitor.cpp \
    rfid/sm4.cpp \
    rfid/sm3.cpp \
    rfid/rfidfunction.cpp \
@@ -347,7 +352,8 @@ SOURCES +=\
    loginfoctrl.cpp \
    runtimectrl.cpp \
    DlgCanvasHeightEditor.cpp \
-    StateMachine/PrinterStateManager.cpp
+    StateMachine/PrinterStateManager.cpp \
+    dlgviscositysetting.cpp



@@ -394,4 +400,4 @@ if(contains(DEFINES,__2451WIFI__))
    #SOURCES += /home/student/newDisk/2451_linux/wpa_supplicant_hostapd/wpa_supplicant_hostapd-0.8/src/common/wpa_ctrl.c
    #INCLUDEPATH += /home/student/newDisk/2451_linux/wpa_supplicant_hostapd/wpa_supplicant_hostapd-0.8/src
    #INCLUDEPATH += /home/student/newDisk/2451_linux/wpa_supplicant_hostapd/wpa_supplicant_hostapd-0.8/src/utils
-}
+}
@@ -1,5 +1,6 @@
-#include "PrinterStateManager.h"
+#include "PrinterStateManager.h"
 #include <QDebug>
+#include "LogInfo.h"

 PrinterStateManager* PrinterStateManager::s_instance = nullptr;

@@ -15,17 +16,26 @@ PrinterStateManager::PrinterStateManager()
 {
    initTransitions();
    m_currentState = PrinterState::IDLE;
+    initTimer();
 }

 PrinterStateManager::~PrinterStateManager()
 {
+    if (m_updateUITimer) {
+        m_updateUITimer->stop();
+        m_updateUITimer->deleteLater();
+        m_updateUITimer = NULL;
+    }
+    if (m_sysPara) {
+        m_sysPara = NULL;
+    }
 }

 QString PrinterStateManager::stateName() const
 {
    switch (m_currentState) {
    case PrinterState::IDLE: return "空闲";
-    case PrinterState::SELF_CHECK: return "自检中";
+    case PrinterState::SELF_CHECK: return "自检完成";
    case PrinterState::READY: return "就绪";
    case PrinterState::PRINTING: return "打印中";
    case PrinterState::STOPPING: return "停止中";
@@ -38,7 +48,7 @@ QString PrinterStateManager::stateName() const
 // ============ 初始化状态（开机时调用一次） ============
 void PrinterStateManager::initFromSysPara()
 {
-    setState(PrinterState::SELF_CHECK, "Init from sysPara");
+    setState(PrinterState::IDLE, "Init from sysPara");
 }

 // ============ 状态转移表 ============
@@ -49,9 +59,13 @@ void PrinterStateManager::initTransitions()
        {PrinterState::IDLE, PrinterEvent::PowerOn,
         PrinterState::SELF_CHECK, "IDLE → SELF_CHECK", nullptr},
        {PrinterState::SELF_CHECK, PrinterEvent::SelfCheckDone,
-         PrinterState::READY, "SELF_CHECK → READY", nullptr},
+         PrinterState::READY, "SELF_CHECK → READY",
+         [this]() -> bool { return guardReclaimTankOpen(); }},
        {PrinterState::SELF_CHECK, PrinterEvent::SelfCheckFailed,
         PrinterState::ERROR, "SELF_CHECK → ERROR", nullptr},
+        // 注意，逆清洗和关回收槽时，需要把状态重新切换回自检
+        {PrinterState::READY, PrinterEvent::ReSelfCheck,
+         PrinterState::SELF_CHECK, "READY → SELF_CHECK", nullptr},

        // 打印流程
        {PrinterState::READY, PrinterEvent::StartPrint,
@@ -101,8 +115,9 @@ PrinterStateManager::Transition* PrinterStateManager::findTransition(PrinterEven
 // ============ 请求切换状态（外部唯一接口） ============
 void PrinterStateManager::requestTransition(PrinterEvent event)
 {
-    qDebug() << "Request event:" << static_cast<int>(event)
-             << "Current:" << stateName();
+    LogInfo::setRunStatusText(QString("Transition %1:%2")
+                              .arg(stateName())
+                              .arg(m_sysPara->status.reclaimTankstatus));

    Transition* trans = findTransition(event);
    if (!trans) {
@@ -123,11 +138,44 @@ void PrinterStateManager::requestTransition(PrinterEvent event)
    setState(trans->toState, trans->description);
 }

+void PrinterStateManager::checkReadyState()
+{
+    // 自检完成后，随时检查能否进入READY状态
+    if (m_currentState == PrinterState::SELF_CHECK) {
+        if (m_sysPara) {
+            // 现在还有个压力稳定期，期间也不能切换状态
+            if (m_sysPara->status.airPushing) {
+                return;
+            }
+
+            switch (m_sysPara->status.reclaimTankstatus) {
+            case 5:
+                emit sig_updateReclaimStatus();
+                // 检测压力波动 -10~10，检测 3 秒,相位故障 检测3秒,总时长不超过60秒
+                if (!isState(PrinterState::READY)) {
+                    if (m_canReadyTimer) m_canReadyTimer->start();
+                }
+                break;
+            default:
+                // 回收槽状态变化后就更新一次
+                if (lastState != m_sysPara->status.reclaimTankstatus
+                        && m_sysPara->status.reclaimTankstatus != 0) {
+                    if (m_updateUITimer && !m_updateUITimer->isActive()) {
+                        m_updateUITimer->start();
+                    }
+                    lastState = m_sysPara->status.reclaimTankstatus;
+                    emit sig_updateReclaimStatus();
+                }
+                break;
+            }
+        }
+    }
+}
+
 // ============ 内部状态切换 ============
 void PrinterStateManager::setState(PrinterState newState, const QString& reason)
 {
    if (m_currentState == newState) {
-        qDebug() << "State already:" << stateName();
        return;
    }

@@ -136,8 +184,13 @@ void PrinterStateManager::setState(PrinterState newState, const QString& reason)

    qDebug() << "State changed:" << stateName() << "Reason:" << reason;

+    if (m_updateUITimer && !m_updateUITimer->isActive()) {
+        m_updateUITimer->start();
+    }
+
    // 发送信号通知外部
    emit sig_stateChanged(newState, m_previousState, reason);
+    emit sig_updateReclaimStatus();
 }

 // ============ 辅助函数 ============
@@ -160,7 +213,8 @@ QString PrinterStateManager::stateNameFromEnum(PrinterState state) const
 bool PrinterStateManager::guardReclaimTankOpen()
 {
    if (!m_sysPara) return false;
-    return m_sysPara->status.reclainTankReachEnd == true;
+    // 开完成和关完成后，回收槽状态会变成0
+    return m_sysPara->status.reclainTankReachEnd || (m_sysPara->status.reclaimTankstatus == 5);
 }

 bool PrinterStateManager::guardInkSwintOpen()
@@ -190,7 +244,7 @@ bool PrinterStateManager::guardNoSolventWarn()
 bool PrinterStateManager::guardSelfCheckDone()
 {
    if (!m_sysPara) return false;
-    return m_sysPara->status.selfCheckDone == true;
+    return m_sysPara->status.selfCheckDone;
 }

 bool PrinterStateManager::guardCanStartPrint()
@@ -201,3 +255,110 @@ bool PrinterStateManager::guardCanStartPrint()
    return guardReclaimTankOpen() && guardInkSwintOpen() &&
            guardNoError() && guardSelfCheckDone();
 }
+
+void PrinterStateManager::initTimer()
+{
+    if (m_updateUITimer == NULL) {
+        m_updateUITimer = new QTimer();
+        connect(m_updateUITimer, &QTimer::timeout, this,
+                &PrinterStateManager::slt_timeoutUI);
+        m_updateUITimer->setInterval(50);
+        m_updateUITimer->setSingleShot(true);
+    }
+    if (m_canReadyTimer == NULL) {
+        m_canReadyTimer = new QTimer();
+        connect(m_canReadyTimer, &QTimer::timeout, this,
+                &PrinterStateManager::slt_timeoutReady);
+        m_canReadyTimer->setInterval(500);
+    }
+}
+
+void PrinterStateManager::slt_timeoutUI()
+{
+    if (m_sysPara) {
+        LogInfo::setRunStatusText(QString("slt_timeout ENTER:%1--state:%2")
+                                  .arg(stateName())
+                                  .arg(m_sysPara->status.reclaimTankstatus));
+
+        switch (m_sysPara->status.reclaimTankstatus) {
+        case 0:
+            emit sig_updateReclaimStatus();
+            break;
+        case 1: // 开
+            emit sig_enableOpenTank(false);
+            emit sig_enableCloseTank(true);
+            break;
+        case 2: // 关
+            emit sig_enableOpenTank(true);
+            emit sig_enableCloseTank(false);
+            break;
+        case 3:
+        case 4:
+            break;
+        case 5: // 开完成
+            emit sig_enableOpenTank(false);
+            emit sig_enableCloseTank(true);
+            break;
+        case 6: // 6关完成
+            emit sig_enableOpenTank(true);
+            emit sig_enableCloseTank(false);
+            break;
+        case 0x10: // 故障
+            emit sig_enableStartPrint(false);
+            emit sig_enableStopPrint(false);
+            emit sig_enableOpenTank(false);
+            emit sig_enableCloseTank(true);
+            break;
+        case 0x11: // 卡住，关闭
+        default:
+            break;
+        }
+    }
+
+    // STATE
+    switch (m_currentState) {
+    case PrinterState::SELF_CHECK:
+        emit sig_enableStartPrint(false);
+        emit sig_enableStopPrint(false);
+        break;
+    // 需要确认开完成时，状态是否一定是READY，然后避免重复操作 TODO
+    case PrinterState::READY:
+        emit sig_enableStartPrint(true);
+        emit sig_enableStopPrint(true);
+        break;
+    default:
+        break;
+    }
+
+    // 避免发出太多信号
+    if (m_updateUITimer) m_updateUITimer->stop();
+}
+
+static short allTimes = 0;
+static short checkTimes = 0;
+void PrinterStateManager::slt_timeoutReady()
+{
+    allTimes++; //3s(checkTimes=6)一个周期，不超过60秒
+    if (allTimes > 120) {
+        if (m_canReadyTimer) m_canReadyTimer->stop();
+
+        allTimes = 0;
+        checkTimes = 0;
+        emit sig_closeTank();
+        emit sig_infoMsg(tr("相位故障，回收喷嘴"));
+    }
+
+    emit sig_infoMsg(tr("检查相位中..."));
+
+    // 检查相位，如果有一个错误，就重新开始累计
+    if (m_sysPara->status.lastPhaseFault) { checkTimes = 0; }
+
+    // 累计6次（3秒）后，再进入READY状态
+    if (checkTimes++ > 5){
+        if (m_canReadyTimer) m_canReadyTimer->stop();
+
+        checkTimes = 0;
+        setState(PrinterState::READY, "READY");
+        emit sig_infoMsg(tr("检查完毕"));
+    }
+}
@@ -2,12 +2,13 @@
 #define PRINTERSTATEMANAGER_H

 #include <QObject>
+#include <QTimer>
 #include <QVector>
 #include "SysPara.h"

 enum class PrinterState {
    IDLE,           // 空闲
-    SELF_CHECK,     // 自检中
+    SELF_CHECK,     // 自检完成
    READY,          // 就绪
    PRINTING,       // 打印中
    STOPPING,       // 停止中
@@ -20,6 +21,7 @@ enum class PrinterEvent {
    PowerOn,
    SelfCheckDone,
    SelfCheckFailed,
+    ReSelfCheck,
    StartPrint,
    StopPrint,
    StopComplete,
@@ -52,10 +54,30 @@ public:
    // 外部唯一接口：请求切换状态
    void requestTransition(PrinterEvent event);

+    // 检查状态
+    void checkReadyState();
 signals:
    // 状态变化信号（外部监听执行具体业务）
    void sig_stateChanged(PrinterState newState, PrinterState oldState, QString reason);

+    //使能开始和停止打印按钮
+    void sig_enableStartPrint(bool);
+    void sig_enableStopPrint(bool);
+    //使能开关回收槽
+    void sig_enableOpenTank(bool);
+    void sig_enableCloseTank(bool);
+
+    // 更新回收槽状态
+    void sig_updateReclaimStatus();
+
+    // 收回收槽
+    void sig_closeTank();
+    // 提示信息
+    void sig_infoMsg(QString);
+
+    // 墨水告警
+    void sig_infoBox(QString);
+
 private:
    PrinterStateManager();
    ~PrinterStateManager();
@@ -80,6 +102,9 @@ private:

    QVector<Transition> m_transitions;

+    // 记录上一次回收槽状态
+    unsigned char lastState = 0;
+
    void initTransitions();
    Transition* findTransition(PrinterEvent event);

@@ -88,7 +113,7 @@ private:

    QString stateNameFromEnum(PrinterState state) const;

-    // ============ 守卫条件函数 ============
+    // ============ guard 守卫条件函数 ============
    // 检查回收槽是否已打开
    bool guardReclaimTankOpen();

@@ -98,10 +123,10 @@ private:
    // 检查是否无故障
    bool guardNoError();

-    // 检查是否无墨水警告
+    // 检查是否无墨水警告 true:正常
    bool guardNoInkWarn();

-    // 检查是否无溶剂警告
+    // 检查是否无溶剂警告 true:正常
    bool guardNoSolventWarn();

    // 检查自检是否已完成
@@ -110,5 +135,12 @@ private:
    // 检查是否满足所有打印条件
    bool guardCanStartPrint();

+private:
+    QTimer* m_updateUITimer = NULL; //更新按钮UI
+    QTimer* m_canReadyTimer = NULL; //回收槽到底后检查是否满足打印条件
+    void initTimer();
+private slots:
+    void slt_timeoutUI();
+    void slt_timeoutReady();
 };
 #endif // PRINTERSTATEMANAGER_H
@@ -1115,7 +1115,7 @@ typedef struct{
    int viscosityFault;// 0 正常，1－粘度值高，2－粘度值低
    int lastViscosityFault;		//用来记录上一次的粘度错误状态
    int lastStatWarn;
-    int lastPhaseFault;
+    int lastPhaseFault;         //相位
    int phaseErrorCnt;

    /*  Yang */
@@ -340,14 +340,6 @@ void SystemManage::on_pushButtonControlByHand_pressed()
 void SystemManage::on_pushButtonReclaimTankOpen_pressed()
 {
    if(sysPara){
-        // if(!sysPara->para.isCheckMagnet)
-        // {
-        //     if(!(sysPara->status.statWarn & WARN_STATUS_HDINT)){
-        //                     QMessageBox::warning(this, tr("警告"),
-        //                                          tr("请先移开喷头盖!"));
-        //         return ;
-        //     }
-        // }
        sysPara->devOp->controlReclaimTankOpen(!sysPara->devOp->isReclaimTankOpenEnable());
        ui->labelReclaimTankOpen->setText(sysPara->devOp->isReclaimTankOpenEnable()?tr("启动"):tr("停止"));
        sysPara->devOp->highVoltageCtrl(0);
@@ -355,20 +347,13 @@ void SystemManage::on_pushButtonReclaimTankOpen_pressed()
        sysPara->status.reclainCloseAppending = false;
        sysPara->status.currReclaimOperationCnt = 0;
        sysPara->status.reclainTankReachEnd = false;
+        sysPara->status.reclaimTankstatus = 1;
    }
 }

 void SystemManage::on_pushButtonReclaimTankClose_pressed()
 {
    if(sysPara){
-        // if(!sysPara->para.isCheckMagnet)
-        // {
-        //     if(!(sysPara->status.statWarn & WARN_STATUS_HDINT)){
-        //         QMessageBox::warning(this, tr("警告"),
-        //                              tr("请先移开喷头盖!"));
-        //         return ;
-        //     }
-        // }
        sysPara->devOp->controlReclaimTankClose(!sysPara->devOp->isReclaimTankCloseEnable());
        ui->labelReclaimTankClose->setText(sysPara->devOp->isReclaimTankCloseEnable()?tr("启动"):tr("停止"));
        sysPara->devOp->highVoltageCtrl(0);
@@ -376,6 +361,7 @@ void SystemManage::on_pushButtonReclaimTankClose_pressed()
        sysPara->status.reclainCloseAppending = true;
        sysPara->status.currReclaimOperationCnt = 0;
        sysPara->status.reclainTankReachEnd = false;
+        sysPara->status.reclaimTankstatus = 2;
    }
 }
 #include <time.h>
@@ -581,12 +567,19 @@ fi\n"	;

 void SystemManage::on_pushButtonUpdateSoftware_pressed()
 {
-   if(sysPara->status.updateSoftEN==0){
-      dialogUpateMm->clearAuth();
-       dialogUpateMm->show();
-   }
-   else  ondialogAuthorizationAccepted();
+    if(sysPara->status.updateSoftEN==0){
+        dialogUpateMm->clearAuth();
+        dialogUpateMm->show();
+
+        QPoint topLeft = this->mapToGlobal(QPoint(0, 0));
+        int x = topLeft.x() + (this->width()  - dialogUpateMm->width())  / 2;
+        int y = topLeft.y() + (this->height() - dialogUpateMm->height()) / 2 - 200;
+        dialogUpateMm->move(x, y);
+
+    }
+    else  ondialogAuthorizationAccepted();
 }
+
 void SystemManage::ondialogAuthorizationAccepted()
 {
    QString authString= dialogUpateMm->getAuth();
@@ -498,6 +498,39 @@
            </property>
           </widget>
          </item>
+          <item>
+           <widget class="QPushButton" name="btnSaveAs">
+            <property name="styleSheet">
+             <string notr="true">QPushButton {
+            background: qlineargradient(x1: 0.5, y1: 0, x2: 0.5, y2: 1, stop: 0 #6F9CD6, stop: 1 #FFFFFF);
+            border: 1px solid #a0a0a0;
+            border-radius: 8px;
+            padding: 8px 12px;
+            min-width: 90px;
+            min-height: 50px;
+        }
+        QPushButton:hover {
+            background-color: #d0d0d0;
+        }
+        QPushButton:pressed {
+            background-color: #c0c0c0;
+        }</string>
+            </property>
+            <property name="text">
+             <string>另存为</string>
+            </property>
+            <property name="icon">
+             <iconset resource="image.qrc">
+              <normaloff>:/image/saveAs.png</normaloff>:/image/saveAs.png</iconset>
+            </property>
+            <property name="iconSize">
+             <size>
+              <width>62</width>
+              <height>62</height>
+             </size>
+            </property>
+           </widget>
+          </item>
          <item>
           <widget class="QPushButton" name="btnListConfig">
            <property name="styleSheet">
@@ -6,7 +6,7 @@
 */
 #define UP_PRINTER_MAJOR_VER  6
 #define UP_PRINTER_MINOR_VER  9
-#define UP_PRINTER_RIVISION_VER  1
+#define UP_PRINTER_RIVISION_VER  5
 #define SUB_VERSION "_KOR"
 #ifdef __RFID_OLD
 #define SUB_RFID "_RO"
@@ -0,0 +1,215 @@
+#include "dlgviscositysetting.h"
+#include "ui_dlgviscositysetting.h"
+
+#include <QDir>
+#include <QSettings>
+#include <QDebug>
+
+#define WAITTIMEMAX 20
+
+DlgViscositySetting::DlgViscositySetting(QWidget *parent) :
+    QDialog(parent),
+    ui(new Ui::DlgViscositySetting)
+{
+    ui->setupUi(this);
+}
+
+DlgViscositySetting::~DlgViscositySetting()
+{
+    if (timer) {
+        timer->stop();
+        delete timer;
+        timer = nullptr;
+    }
+    delete ui;
+}
+
+void DlgViscositySetting::bindSysPara(SysPara *sysPara)
+{
+    this->sysPara = sysPara;
+    init();
+}
+
+int DlgViscositySetting::getAlertValue()
+{
+    return ui->sb_alert->value();
+}
+
+int DlgViscositySetting::getCloseValue()
+{
+    return ui->sb_close->value();
+}
+
+void DlgViscositySetting::init()
+{
+    if (sysPara) {
+        loadConfig();
+        initTimer();
+    }
+}
+
+void DlgViscositySetting::initTimer()
+{
+    if (timer == nullptr) {
+        timer = new QTimer(this);
+        connect(timer, &QTimer::timeout,
+                this, &DlgViscositySetting::onTimeOut);
+        timer->start(1000);
+    }
+}
+
+void DlgViscositySetting::loadConfig()
+{
+    QSettings settings(kConfDir+kConfFile, QSettings::IniFormat);
+
+    // 若 ini 中没有值，使用 SpinBox 当前默认值
+    alertV = settings.value(kGroupViscosity + "/" + kKeyAlertThreshold,
+                               ui->sb_alert->value()).toInt();
+    closeV = settings.value(kGroupViscosity + "/" + kKeyCloseThreshold,
+                               ui->sb_close->value()).toInt();
+    if (alertV < 100) alertV = 250;
+    if (closeV < 160) closeV = 300;
+    ui->sb_alert->setValue(alertV);
+    ui->sb_close->setValue(closeV);
+}
+
+void DlgViscositySetting::saveConfig()
+{
+    // 确保目录存在
+    QDir dir(kConfDir);
+    if (!dir.exists()) {
+        if (!dir.mkpath(".")) {
+//            qWarning() << "无法创建配置目录:" << kConfDir;
+            return;
+        }
+    }
+
+    QSettings settings(kConfDir+kConfFile, QSettings::IniFormat);
+    settings.setValue(kGroupViscosity + "/" + kKeyAlertThreshold, ui->sb_alert->value());
+    settings.setValue(kGroupViscosity + "/" + kKeyCloseThreshold, ui->sb_close->value());
+    settings.sync();
+
+    if (settings.status() != QSettings::NoError) {
+        qWarning() << "写入配置文件失败:" << kConfDir+kConfFile;
+    } else {
+        qDebug() << "配置已保存到:" << kConfDir+kConfFile;
+    }
+}
+
+short DlgViscositySetting::checkClose(int visCurr, int visSetting)
+{
+    if (visCurr == 0) return 0;
+
+    if (visCurr - closeV >= visSetting) {
+        return 1;
+    } else if (visCurr + closeV <= visSetting) {
+        return 2;
+    }
+    return 0;
+}
+
+short DlgViscositySetting::checkAlert(int visCurr, int visSetting)
+{
+    if (visCurr == 0) return 0;
+
+    if (visCurr - alertV >= visSetting) {
+        return 1;
+    } else if (visCurr + alertV <= visSetting) {
+        return 2;
+    }
+    return 0;
+}
+
+static short alertTimes = 0;
+static short closeTimes = 0;
+// 如果提示了，就等10分钟后再重新检查,WAITTIMEMAX = 600
+static short waitTimes = 0;
+void DlgViscositySetting::onTimeOut()
+{
+    // 1秒一次，5秒防抖
+    if (sysPara) {
+        visSetting = sysPara->para.viscosity;
+        visCurr = sysPara->status.viscosity;
+        // test
+//        sysPara->status.viscosity = 1000;
+//        sysPara->status.selfCheckDone = 1;
+//        visCurr = sysPara->status.viscosity;
+
+        ui->lb_settings->setText(QString::number(visSetting));
+        ui->lb_current->setText(QString::number(visCurr));
+
+        if (waitTimes-- > 0) {
+            return;
+        }
+
+        // 虽然处理并不严谨，但是直接最低值切换到最高值的情况几乎不会发生
+        // 是否触发关闭喷嘴
+        short closeV = checkClose(visCurr, visSetting);
+        if (closeV != 0) {
+            if (closeTimes++ > 5) {
+                bool closeFlag = closeV == 1? true : false;
+                emit sig_close(closeFlag);
+                closeTimes = 0;
+                waitTimes = WAITTIMEMAX;
+                alertTimes = 0;
+                return;
+            }
+        } else {
+            closeTimes = 0;
+        }
+
+        // 是否触发报警
+        short alertV = checkAlert(visCurr, visSetting);
+        if (alertV != 0) {
+            if (alertTimes++ > 5) {
+                bool alertFlag = alertV == 1? true : false;
+                emit sig_alert(alertFlag);
+                alertTimes = 0;
+                waitTimes = WAITTIMEMAX;
+            }
+        } else {
+            alertTimes = 0;
+        }
+    }
+}
+
+
+void DlgViscositySetting::on_checkBtn_clicked()
+{
+    saveConfig();
+    visSetting = sysPara->para.viscosity;
+    visCurr = sysPara->status.viscosity;
+    closeV = ui->sb_close->value();
+    alertV = ui->sb_alert->value();
+}
+
+void DlgViscositySetting::on_closeBtn_clicked()
+{
+    this->hide();
+}
+
+void DlgViscositySetting::on_sb_alert_editingFinished()
+{
+    int tmp = ui->sb_alert->value();
+    // 告警阈值最小100，关闭阈值至少比告警大60
+    if (tmp < 100) {
+        ui->sb_alert->setValue(100);
+        tmp = 100;
+    }
+    if (tmp > ui->sb_close->value()) {
+        ui->sb_close->setValue(tmp+60);
+    }
+}
+
+void DlgViscositySetting::on_sb_close_editingFinished()
+{
+    int tmp = ui->sb_close->value();
+    // 告警阈值最小100，关闭阈值至少比告警大60
+    if (tmp < 160) {
+        ui->sb_close->setValue(160);
+        tmp = 160;
+    }
+    if (tmp < ui->sb_alert->value()) {
+        ui->sb_alert->setValue(tmp-60);
+    }
+}
@@ -0,0 +1,74 @@
+#ifndef DLGVISCOSITYSETTING_H
+#define DLGVISCOSITYSETTING_H
+
+#include "SysPara.h"
+
+#include <QDialog>
+#include <QTimer>
+
+/**
+ 功能简单，不分层实现功能
+ 在此界面设置告警阈值和关回收槽阈值
+ 定时器连续5次检测报警，就发出对应信号
+*/
+
+namespace Ui {
+class DlgViscositySetting;
+}
+
+class DlgViscositySetting : public QDialog
+{
+    Q_OBJECT
+
+public:
+    explicit DlgViscositySetting(QWidget *parent = 0);
+    ~DlgViscositySetting();
+
+    void bindSysPara(SysPara *sysPara);
+
+    int getAlertValue();
+    int getCloseValue();
+private slots:
+    void on_checkBtn_clicked();
+
+private:
+    Ui::DlgViscositySetting *ui;
+    SysPara* sysPara = nullptr;
+    // 公共配置目录与文件名
+    const QString kConfDir  = QStringLiteral("/home/plg/conf/");
+    const QString kConfFile = QStringLiteral("software_ui.ini");
+    // ini 中的分组与键名
+    const QString kGroupViscosity     = QStringLiteral("Viscosity");
+    const QString kKeyAlertThreshold  = QStringLiteral("alertThreshold");
+    const QString kKeyCloseThreshold  = QStringLiteral("closeThreshold");
+
+    QTimer* timer = nullptr;
+    int visSetting = 0;
+    int visCurr = 0;
+    int closeV = 0;
+    int alertV = 0;
+
+private:
+    void init();
+    void initTimer();
+    void loadConfig();       // 从 ini 读取
+    void saveConfig();       // 写入 ini
+
+    short checkClose(int visCurr, int visSetting);
+    short checkAlert(int visCurr, int visSetting);
+private slots:
+    void onTimeOut();
+
+    void on_closeBtn_clicked();
+
+    void on_sb_alert_editingFinished();
+
+    void on_sb_close_editingFinished();
+
+signals:
+    // true:比设定值高 false:比设定值低
+    void sig_alert(bool);
+    void sig_close(bool);
+};
+
+#endif // DLGVISCOSITYSETTING_H
@@ -0,0 +1,251 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<ui version="4.0">
+ <class>DlgViscositySetting</class>
+ <widget class="QDialog" name="DlgViscositySetting">
+  <property name="geometry">
+   <rect>
+    <x>0</x>
+    <y>0</y>
+    <width>430</width>
+    <height>233</height>
+   </rect>
+  </property>
+  <property name="windowTitle">
+   <string>告警浮动范围设置</string>
+  </property>
+  <widget class="QPushButton" name="closeBtn">
+   <property name="geometry">
+    <rect>
+     <x>310</x>
+     <y>170</y>
+     <width>101</width>
+     <height>50</height>
+    </rect>
+   </property>
+   <property name="text">
+    <string>✕</string>
+   </property>
+  </widget>
+  <widget class="QPushButton" name="checkBtn">
+   <property name="geometry">
+    <rect>
+     <x>170</x>
+     <y>170</y>
+     <width>101</width>
+     <height>50</height>
+    </rect>
+   </property>
+   <property name="text">
+    <string>✓</string>
+   </property>
+  </widget>
+  <widget class="QLabel" name="lb_alertThreshold">
+   <property name="geometry">
+    <rect>
+     <x>60</x>
+     <y>60</y>
+     <width>141</width>
+     <height>41</height>
+    </rect>
+   </property>
+   <property name="text">
+    <string>告警阈值:</string>
+   </property>
+   <property name="alignment">
+    <set>Qt::AlignRight|Qt::AlignTrailing|Qt::AlignVCenter</set>
+   </property>
+  </widget>
+  <widget class="QLabel" name="lb_closeThreshold">
+   <property name="geometry">
+    <rect>
+     <x>60</x>
+     <y>110</y>
+     <width>141</width>
+     <height>41</height>
+    </rect>
+   </property>
+   <property name="text">
+    <string>关喷嘴阈值:</string>
+   </property>
+   <property name="alignment">
+    <set>Qt::AlignRight|Qt::AlignTrailing|Qt::AlignVCenter</set>
+   </property>
+  </widget>
+  <widget class="QSpinBox" name="sb_alert">
+   <property name="geometry">
+    <rect>
+     <x>220</x>
+     <y>60</y>
+     <width>91</width>
+     <height>37</height>
+    </rect>
+   </property>
+   <property name="sizePolicy">
+    <sizepolicy hsizetype="Minimum" vsizetype="Preferred">
+     <horstretch>0</horstretch>
+     <verstretch>0</verstretch>
+    </sizepolicy>
+   </property>
+   <property name="minimumSize">
+    <size>
+     <width>0</width>
+     <height>37</height>
+    </size>
+   </property>
+   <property name="maximumSize">
+    <size>
+     <width>16777215</width>
+     <height>37</height>
+    </size>
+   </property>
+   <property name="minimum">
+    <number>80</number>
+   </property>
+   <property name="maximum">
+    <number>750</number>
+   </property>
+   <property name="singleStep">
+    <number>10</number>
+   </property>
+   <property name="value">
+    <number>250</number>
+   </property>
+   <property name="displayIntegerBase">
+    <number>10</number>
+   </property>
+  </widget>
+  <widget class="QSpinBox" name="sb_close">
+   <property name="geometry">
+    <rect>
+     <x>220</x>
+     <y>110</y>
+     <width>91</width>
+     <height>37</height>
+    </rect>
+   </property>
+   <property name="sizePolicy">
+    <sizepolicy hsizetype="Minimum" vsizetype="Preferred">
+     <horstretch>0</horstretch>
+     <verstretch>0</verstretch>
+    </sizepolicy>
+   </property>
+   <property name="minimumSize">
+    <size>
+     <width>0</width>
+     <height>37</height>
+    </size>
+   </property>
+   <property name="maximumSize">
+    <size>
+     <width>16777215</width>
+     <height>37</height>
+    </size>
+   </property>
+   <property name="minimum">
+    <number>80</number>
+   </property>
+   <property name="maximum">
+    <number>750</number>
+   </property>
+   <property name="singleStep">
+    <number>10</number>
+   </property>
+   <property name="value">
+    <number>310</number>
+   </property>
+  </widget>
+  <widget class="QLabel" name="label">
+   <property name="geometry">
+    <rect>
+     <x>30</x>
+     <y>10</y>
+     <width>81</width>
+     <height>41</height>
+    </rect>
+   </property>
+   <property name="text">
+    <string>设定值:</string>
+   </property>
+   <property name="alignment">
+    <set>Qt::AlignRight|Qt::AlignTrailing|Qt::AlignVCenter</set>
+   </property>
+  </widget>
+  <widget class="QLabel" name="lb_settings">
+   <property name="geometry">
+    <rect>
+     <x>120</x>
+     <y>10</y>
+     <width>81</width>
+     <height>41</height>
+    </rect>
+   </property>
+   <property name="text">
+    <string>TextLabel</string>
+   </property>
+  </widget>
+  <widget class="QLabel" name="lb_current">
+   <property name="geometry">
+    <rect>
+     <x>320</x>
+     <y>10</y>
+     <width>81</width>
+     <height>41</height>
+    </rect>
+   </property>
+   <property name="text">
+    <string>TextLabel</string>
+   </property>
+  </widget>
+  <widget class="QLabel" name="label_4">
+   <property name="geometry">
+    <rect>
+     <x>220</x>
+     <y>10</y>
+     <width>81</width>
+     <height>41</height>
+    </rect>
+   </property>
+   <property name="text">
+    <string>当前值:</string>
+   </property>
+   <property name="alignment">
+    <set>Qt::AlignRight|Qt::AlignTrailing|Qt::AlignVCenter</set>
+   </property>
+  </widget>
+ </widget>
+ <resources/>
+ <connections>
+  <connection>
+   <sender>checkBtn</sender>
+   <signal>clicked()</signal>
+   <receiver>DlgViscositySetting</receiver>
+   <slot>accept()</slot>
+   <hints>
+    <hint type="sourcelabel">
+     <x>220</x>
+     <y>174</y>
+    </hint>
+    <hint type="destinationlabel">
+     <x>214</x>
+     <y>116</y>
+    </hint>
+   </hints>
+  </connection>
+  <connection>
+   <sender>closeBtn</sender>
+   <signal>clicked()</signal>
+   <receiver>DlgViscositySetting</receiver>
+   <slot>reject()</slot>
+   <hints>
+    <hint type="sourcelabel">
+     <x>360</x>
+     <y>174</y>
+    </hint>
+    <hint type="destinationlabel">
+     <x>214</x>
+     <y>116</y>
+    </hint>
+   </hints>
+  </connection>
+ </connections>
+</ui>
@@ -149,5 +149,6 @@
        <file>image/up_white.png</file>
        <file>image/RePipeClose.png</file>
        <file>image/RePipeOpen.png</file>
+        <file>image/saveAs.png</file>
    </qresource>
 </RCC>
@@ -129,6 +129,8 @@ void MainWidget::init()
    airPushTimer = new QTimer(this);
    connect(airPushTimer, SIGNAL(timeout()), this, SLOT(airPushingProcess()));

+    m_pressureMonitor = new PressureMonitor();
+
    timerPowerOff = new QTimer(this);
    connect(timerPowerOff,SIGNAL(timeout()),this,SLOT(sendPowerOffCmd()));

@@ -144,6 +146,9 @@ void MainWidget::init()
    }
    connect(m_setNumDlg, &SetNumDlg::sig_setNum, this, &MainWidget::slt_setNum);
    connect(m_setNumDlg, &SetNumDlg::sig_clearCnt, this, &MainWidget::slt_clearCnt);
+
+    connect(m_setNumDlg, &SetNumDlg::sig_resetCNT1, this, &MainWidget::slt_resetCNT1);
+    connect(m_setNumDlg, &SetNumDlg::sig_resetCNT2, this, &MainWidget::slt_resetCNT2);
 }

 void MainWidget::buttonClickedSlot()
@@ -185,7 +190,7 @@ void MySleep(unsigned int msec)

 }

-bool MainWidget::generatePrintContent(PicScene *scene)
+bool MainWidget::generatePrintContent(PicScene *scene, const PrintSettingModel& printSettings)
 {
    if(!scene) {
        qWarning() << "Scene is empty!";
@@ -200,7 +205,34 @@ bool MainWidget::generatePrintContent(PicScene *scene)
    this->pPicScene = scene;
    onPreviewScene();

+    this->printSettingsModel = printSettings;
+    PrintSettingModel::applyToSysPara(printSettings, sysPara);
+
    SendPrintDataToFpga(0);
+
+
+    // 检查场景内是否有计数器，根据是否有对应计数器，显示或禁用setNumDlg中对应的按钮。
+    bool hasCNT1 = false;
+    bool hasCNT2 = false;
+    auto items = pPicScene->items();
+    for(auto item : items) {
+        auto cntItem = dynamic_cast<PicCounterItem*>(item);
+        if(!cntItem)
+            continue;
+        
+        if(cntItem->counterType() == COUNTER_TYPE_1) {
+            hasCNT1 = true;
+            continue;
+        }
+
+        if(cntItem->counterType() == COUNTER_TYPE_2) {
+            hasCNT2 = true;
+            continue;
+        }
+    }
+
+    m_setNumDlg->setCNTResetBtnsEnable(hasCNT1, hasCNT2);
+
    return true;
 }

@@ -238,8 +270,8 @@ void MainWidget::_on_pushButtonPowerOff_pressed(bool notice)
            sysPara->status.reclaimCloseCnt=10;
            //on_pushButtonStopPrint_pressed();
            on_m_StopBtn_clicked();
+            MySleep(10);
            on_m_LeftBtn_clicked();
-            //on_pushButtonReclaimTankClose_pressed();
            sysPara->status.powerOffAppending = true;
            setReclaimCloseBtnStatus(false);
            setReclaimOpenBtnStatus(false);
@@ -924,8 +956,19 @@ void MainWidget::enablePrintButton(bool enable){
    m_StopBtn->setEnabled(enable);
 }

+void MainWidget::enabeleStartBtn(bool enable)
+{
+    m_StartBtn->setEnabled(enable);
+}
+
+void MainWidget::enabeleStopBtn(bool enable)
+{
+    m_StopBtn->setEnabled(enable);
+}
+
 void MainWidget::updateTotalCnt(int en)
 {
+    Q_UNUSED(en)
    // No50 USEING
    //sysPara->para.totalProductCnt += (sysPara->status.productCnt>sysPara->status.lastProductCnt)?sysPara->status.productCnt-sysPara->status.lastProductCnt:
    //                                                                                             (sysPara->status.productCnt>=0&&sysPara->status.productCnt<20)?sysPara->status.productCnt:0;
@@ -947,95 +990,56 @@ void MainWidget::updateTotalCnt(int en)
 void MainWidget::on_m_StartBtn_clicked()
 {
    if(sysPara){
-    test_flag = 0;
+        test_flag = 0;

-        if (!checkTriggerMode()) return;
+        if (!checkTriggerMode()) {
+            return;
+        }

-    // 打印状态交给状态机修改
-    sysPara->status.isPrinting=false;
-        // auto mgr = PrinterStateManager::instance();
-#if !defined(FPGA_TEST) && !defined(QT_DEBUG)
-        // if (mgr && mgr->canStopPrint()) {
-        //     mgr->requestTransition(PrinterEvent::StopPrint);
-        // } else {return;}
-#endif
+        // 按原来逻辑，只修改打印标志，不使用状态机做多余的操作
+        sysPara->status.isPrinting=false;

-        // SendPrintDataToFpga(0);  // 0－－正常打印，1－－打印交替部分信息1; 2－－打印交替部分信息2,
-
-        /*-------------------------------------------------------------------*/
-        sysPara->status.lastSynColDelay = -1;			//目的是为了清空原来的数据
+        SendPrintDataToFpga(0);  // 0－－正常打印，1－－打印交替部分信息1; 2－－打印交替部分信息2,

        /*---------------------------------开关回收槽------------------------------*/
-        
-        setReclaimCloseBtnStatus(false);
-        setReclaimOpenBtnStatus(false);

        updatePrintDisplayLabel();

-        sysPara->devOp->highVoltageCtrl(1);
-        sysPara->devOp->setHighVoltageAmplitudetoSTM32();
-
-        // 20170717 移动此，以观察条形码打印异常问题。
-        if(!startPrintingFlag)
-        {
-            sysPara->devOp->printCtrl(PRINT_CTRL_START);
-            printintFlag = true;
+        auto mgr = PrinterStateManager::instance();
+        if (mgr->canStartPrint() || mgr->isState(PrinterState::PRINTING)) {
+            mgr->requestTransition(PrinterEvent::StartPrint);
        }

-        startPrintingFlag = true;
-//        sysPara->status.isPrinting=true;
-        // if (mgr->canStartPrint() || mgr->isState(PrinterState::PRINTING)) {
-        //     mgr->requestTransition(PrinterEvent::StartPrint);
-        // }
-        sysPara->status.isPrinting = true;
-        sysPara->status.waitHightVolOff = 0;
-
        // 高亮切换
        changeHighLight(true);
-}
+
+        LogInfo::setRunStatusText(tr("print:%1--print:%2--state:%3")
+                                  .arg(sysPara->status.reclaimTankstatus)
+                                  .arg(sysPara->status.isPrinting)
+                                  .arg(mgr->stateName()));
+    }
 }

 void MainWidget::on_m_StopBtn_clicked()
 {
    if(sysPara){
-        if (!sysPara->status.reclainTankReachEnd && !SIMULATE_PRINTING_MODE) {
-            return;
+//       sysPara->status.isPrinting=false;// 打印状态交给状态机修改
+        auto mgr = PrinterStateManager::instance();
+        if (mgr && mgr->canStopPrint()) {
+            mgr->requestTransition(PrinterEvent::StopPrint);
        }
-       sysPara->status.isPrinting=false;// 打印状态交给状态机修改
-        // auto mgr = PrinterStateManager::instance();
-#if !defined(FPGA_TEST) && !defined(QT_DEBUG)
-        // if (mgr && mgr->canStopPrint()) {
-        //     mgr->requestTransition(PrinterEvent::StopPrint);
-        // } else {
-        //     return;
-        // }
-#endif
-
-        sysPara->devOp->printCtrl2(1);
-        sysPara->devOp->printCtrl( PRINT_CTRL_STOP);//:PRINT_CTRL_STOPSYNCNT
-

        setReclaimCloseBtnStatus(sysPara->status.currReclaimTankPos != 0);
        setReclaimOpenBtnStatus(sysPara->status.currReclaimTankPos == 0);
-
-        printintFlag = false;
-        startPrintingFlag = false;
        updatePrintDisplayLabel();
-        sysPara->status.waitHightVolOff = 1;
-        sysPara->saveParaToFile();					// 将相关配置保存

-        if(sysPara->status.RandomBackCnt>5 && (sysPara->status.RandomNum>0))
-        {
-            QMessageBox::StandardButton ret;
-            ret = QMessageBox::warning(this, tr("提示"),
-                                       tr("随机码文本将展出到U盘，请插入U盘"),
-                                       QMessageBox::Ok | QMessageBox::Cancel);
-            if (ret == QMessageBox::Ok){
-                sysPara->devOp->RandTxtBakup(0); //备份到U盘
-            }
-        }
        // 高亮切换
        changeHighLight(false);
+
+        LogInfo::setRunStatusText(tr("stop:%1--print:%2--state:%3")
+                                  .arg(sysPara->status.reclaimTankstatus)
+                                  .arg(sysPara->status.isPrinting)
+                                  .arg(mgr->stateName()));
    }
 }

@@ -1085,25 +1089,12 @@ void MainWidget::SendPrintDataToFpga(unsigned char alterEnable, bool isUpdate)
    }
 }

-int MainWidget::getCurrPrintStatus()
-{
-    int printStatus;
-    if (startPrintingFlag ) {
-        if(printintFlag) {
-            printStatus = 1;   // 正在打印
-        }
-        else {
-            printStatus = 2;   // 暂停喷印
-        }
-    }
-    else {
-        printStatus = 3;      // 停止打印
-    }
-    return printStatus;
-}
-
 void MainWidget::setReclaimOpenBtnStatus(bool enable)
 {
+    if (airPushTimer && airPushTimer->isActive()) {
+        return;
+    }
+
    #ifdef __RFID_CARD
    if(sysPara->RFIDPara.inkCardTimeOut
            || sysPara->RFIDPara.solventCardTimeOut
@@ -1119,6 +1110,11 @@ void MainWidget::setReclaimOpenBtnStatus(bool enable)

 void MainWidget::setReclaimCloseBtnStatus(bool enable)
 {
+    if (airPushTimer && airPushTimer->isActive()) {
+        return;
+    }
+
+    enable = !sysPara->status.airPushing && enable;
    ui.m_LeftBtn->setEnabled(enable);
 }

@@ -1149,27 +1145,40 @@ void MainWidget::stopFlashReclaimOpenBtn()
    flashReclaimOpenBtn();
 }

-void MainWidget::setReclaimStatus(bool isOpen, int rate)
+void MainWidget::updateReclaimText()
 {
-    if (isOpen) {
-        if (!sysPara->status.airPushing) {
-            QString str = rate == 100? tr("喷嘴已开启"):tr("喷嘴开启中");
-            ui.lb_RightBtn->setText(str);
-        }
-        ui.lb_LeftBtn->setText(tr("喷嘴关闭"));
-
-    } else {
-        QString str = rate == 0? tr("喷嘴已关闭"):tr("喷嘴关闭中");
-        ui.lb_LeftBtn->setText(str);
-
-        if (!sysPara->status.airPushing) {
-            ui.lb_RightBtn->setText(tr("喷嘴开启"));
-        }
+    QString strR = "";
+    QString strL = "";
+    switch (sysPara->status.reclaimTankstatus) {
+    case 1:
+        strR = tr("喷嘴开启中");
+        strL = tr("喷嘴关闭");
+        break;
+    case 2:
+        strR = tr("喷嘴开启");
+        strL = tr("喷嘴关闭中");
+        break;
+    case 5:
+        strR = tr("喷嘴已开启");
+        strL = tr("喷嘴关闭");
+        break;
+    case 6:
+        strR = tr("喷嘴开启");
+        strL = tr("喷嘴已关闭");
+        break;
+    case 0: // 后续运行中5和6状态之后会自动置为0，所以加额外逻辑
+        strR = ui.lb_RightBtn->text();
+        strL = ui.lb_LeftBtn->text();
+        break;
+    default:
+        break;
+    }
+    if (strR!="" && strL!="") {
+        ui.lb_RightBtn->setText(strR);
+        ui.lb_LeftBtn->setText(strL);
    }
 }

-static int mainInkPumpCtrlStatus = 0;
-static int mainInkPumpCtrlCnt = 0;
 //100ms 为单位
 void MainWidget::airPushingProcess()
 {
@@ -1179,10 +1188,7 @@ void MainWidget::airPushingProcess()
            QString labelTxt = tr("正在排气...");
            setRunStatus(labelTxt);
            ui.lb_RightBtn->setText(labelTxt);
-            setReclaimOpenBtnStatus(false);
-            setReclaimCloseBtnStatus(false);

-            //qDebug()<< "start airPushingProcess "<<sysPara->status.airPushingOnTime;
            // 执行排气 4 秒
            sysPara->status.airPushingOnTime += 100;
            
@@ -1191,18 +1197,6 @@ void MainWidget::airPushingProcess()
                sysPara->saveParaToFile();
            }

-            // 延迟 半秒后才开回收槽，正式结束排气阶段
-            if(sysPara->status.airPushingOnTime >= sysPara->para.airPushDurationSec * 1000 + 500){
-                //qDebug()<< "start stop";
-                reclaimTanOpen();
-                sysPara->status.airPushingDone = 1;
-                sysPara->status.airPushing = 0;
-                sysPara->status.airPushingOnTime = 0;
-                airPushTimer->stop();
-                setRunStatus(tr("喷嘴开启中"));
-                return;
-            }
-
            if(sysPara->status.airPushingOnTime >= sysPara->para.airPushDurationSec * 1000){
                sysPara->devOp->controlViscosityPump(false);
                sysPara->devOp->controlCycleValve(false);
@@ -1210,6 +1204,42 @@ void MainWidget::airPushingProcess()
                if(!sysPara->devOp->isReclaimPumpOpen())
                    sysPara->devOp->controlReclaimPump(true, false);

+                // 切换回自动模式
+                sysPara->status.isPumpValveControledByHand = false;
+
+                setRunStatus(tr("等待压力稳定..."));
+
+                if(m_pressureMonitor->tick((float)sysPara->status.PRESSURE, (float)sysPara->para.pressure)) {
+                    reclaimTanOpen();
+                    sysPara->status.airPushingDone = 1;
+                    sysPara->status.airPushing = 0;
+                    sysPara->status.airPushingOnTime = 0;
+                    airPushTimer->stop();
+                    bool isTimeout = m_pressureMonitor->wasTimeout();
+                    float bufCopy[12];
+                    memcpy(bufCopy, m_pressureMonitor->buffer(), sizeof(bufCopy));
+                    m_pressureMonitor->reset();
+                    setRunStatus(tr("喷嘴开启中"));
+
+                    LogInfo::setRunStatusText(isTimeout
+                        ? "Pressure unstable timeout, fallback open the reclaim tank."
+                        : "Pressure has stabled, will open the reclaim tank.");
+
+                    QString pressureSet = QString("Pressure buffer: [%1, %2, %3, %4, %5, %6, %7, %8, %9, %10, %11, %12]")
+                        .arg(bufCopy[0], 0, 'f', 1)
+                        .arg(bufCopy[1], 0, 'f', 1)
+                        .arg(bufCopy[2], 0, 'f', 1)
+                        .arg(bufCopy[3], 0, 'f', 1)
+                        .arg(bufCopy[4], 0, 'f', 1)
+                        .arg(bufCopy[5], 0, 'f', 1)
+                        .arg(bufCopy[6], 0, 'f', 1)
+                        .arg(bufCopy[7], 0, 'f', 1)
+                        .arg(bufCopy[8], 0, 'f', 1)
+                        .arg(bufCopy[9], 0, 'f', 1)
+                        .arg(bufCopy[10], 0, 'f', 1)
+                        .arg(bufCopy[11], 0, 'f', 1);
+                    LogInfo::setRunStatusText(pressureSet);
+                }
                return;
            }
        }
@@ -1219,33 +1249,22 @@ void MainWidget::airPushingProcess()
 void MainWidget::reclaimTanOpen()
 {
    // 还原当前模式
-    if (sysPara->status.airPushing) {
-        sysPara->status.isPumpValveControledByHand = sysPara->status.byHandStore;
-    }
    sysPara->status.isPumpValveControledByHand = false;
    sysPara->devOp->mainInkCtrl();
-    sysPara->devOp->controlReclaimTankClose(false);//开回收槽之前先让关回收槽停止
-    MySleep(1000);
+    if (sysPara->status.reclaimTankstatus == 2) {
+        sysPara->devOp->controlReclaimTankClose(false);//开回收槽之前先让关回收槽停止
+        MySleep(1000);
+    }
    sysPara->devOp->controlReclaimTankOpen(!sysPara->devOp->isReclaimTankOpenEnable());
    sysPara->devOp->highVoltageCtrl(0);		/*回收槽动作的时候务必关高压*/
-//    sysPara->status.reclaimTankstatus = 1;
-//    setRunStatus(sysPara->devOp->isReclaimTankOpenEnable()?tr("正在打开回收槽..."):tr("停止打开"));
-    setReclaimStatus(true, 0);
-    if (!sysPara->para.reclaimTankTime) {
-//        LogInfo::setRunStatusText(tr("警告!回收槽开关时间未设置!"));
-    } else {
-        
-    }
+    sysPara->status.reclaimTankstatus = 1;
+//    updateReclaimStatus();

    sysPara->status.currReclaimOperationCnt = 0;
    sysPara->status.reclainTankReachEnd = false;
    sysPara->status.reclainOpenAppending = true;
    sysPara->status.reclainCloseAppending = false;
-    sysPara->status.reclaimBlockedCnt = 0;
    sysPara->status.canRunAirPushing = false;
-
-    if (sysPara->status.reclainTankReachEnd)
-        enablePrintButton(SIMULATE_PRINTING_MODE);
 }

 void MainWidget::initSheet()
@@ -1321,13 +1340,6 @@ void MainWidget::initSheet()
    ui.m_RightBtn->setStyleSheet(reclaimBtnNormalStyle);
    ui.m_LeftBtn->setStyleSheet(reclaimBtnNormalStyle);

-    // QString lbSheet = R"(
-    //                   QLabel {
-    //                   border: 1px solid #95a5a6; /* 灰色边框 */
-    //                   }
-    //                   )";
-    // ui.lb_LeftBtn->setStyleSheet(lbSheet);
-    // ui.lb_RightBtn->setStyleSheet(lbSheet);
 }

 void MainWidget::changeHighLight(bool isStart)
@@ -1376,14 +1388,19 @@ void MainWidget::changeHighLight(bool isStart)
 void MainWidget::on_m_RightBtn_clicked()
 {
    if(sysPara){
+        if ((sysPara->status.statWarn & WARN_STATUS_INK_WARN) ||
+                (sysPara->status.statWarn & WARN_STATUS_SOLV_WARN)
+                && powerOnWarn){
+            setRunStatus(tr("墨水或溶剂不足,请先添加"));
+            return;
+        }
+        if (powerOnWarn) powerOnWarn = false;
+
        if (!sysPara->status.reclaimTankBlockedAppending) {
            if (sysPara->status.canRunAirPushing &&
                    (sysPara->status.currReclaimTankPos == 0)) { //2019/10/24 当回收槽未在顶的位置，不需要排气
                // Pos == 0 回收槽关闭的情况下才可以执行排气; 先执行排气后开回收槽
                if (!sysPara->status.airPushing) {
-                    //排气：打印、暂停打印置灰
-                    enablePrintButton(false);
-
                    sysPara->status.byHandStore = sysPara->status.isPumpValveControledByHand;
                    sysPara->status.isPumpValveControledByHand = true;
                    sysPara->devOp->mainInkCtrl();
@@ -1394,13 +1411,21 @@ void MainWidget::on_m_RightBtn_clicked()
                    sysPara->devOp->controlReclaimPump(true, false); // 回收泵开
                    sysPara->devOp->controlInkValve(true); //墨水阀
                    sysPara->devOp->controlInkValvePWM(true); //墨水阀
-                    //qDebug()<< "start airpushings";

                    sysPara->status.airPushing = 1;
                    sysPara->status.airPushingDone = 0;
                    sysPara->status.airPushingOnTime = 0;

                    airPushTimer->start(100); // 100ms
+                    m_pressureMonitor->reset();
+
+                    // 喷嘴开启中
+                    if (m_reclaimOpenBtnFlashTimer && !m_reclaimOpenBtnFlashTimer->isActive()){
+                        ui.lb_RightBtn->setText(tr("正在排气..."));
+                        m_reclaimFlashState = true;
+                        m_reclaimOpenBtnFlashTimer->start();
+                        LogInfo::setRunStatusText("m_reclaimOpenBtnFlashTimer start");
+                    }
                }
            }
            else {
@@ -1415,17 +1440,10 @@ void MainWidget::on_m_RightBtn_clicked()
                                       QMessageBox::Ok | QMessageBox::Cancel);
            if (ret == QMessageBox::Ok){
                sysPara->para.reclaimTankTime = sysPara->status.currReclaimTankPos/10;
-//                onReclainTankPositionChanged(sysPara->para.reclaimTankTime * 10);
            }
        }

-        // 喷嘴开启中
-        if (m_reclaimOpenBtnFlashTimer && !m_reclaimOpenBtnFlashTimer->isActive()){
-            ui.lb_RightBtn->setText(tr("正在排气..."));
-            m_reclaimFlashState = true;
-            m_reclaimOpenBtnFlashTimer->start();
-            LogInfo::setRunStatusText("m_reclaimOpenBtnFlashTimer start");
-        }
+
    }
 }

@@ -1440,28 +1458,24 @@ void MainWidget::on_m_LeftBtn_clicked()
                                       QMessageBox::Ok | QMessageBox::Cancel);
            if (ret == QMessageBox::Ok){
                sysPara->status.currReclaimTankPos = 0;
-//                onReclainTankPositionChanged(0);
            }
        }

        sysPara->devOp->controlReclaimTankClose(!sysPara->devOp->isReclaimTankCloseEnable());
-        enablePrintButton(SIMULATE_PRINTING_MODE);
        sysPara->devOp->highVoltageCtrl(0);
-//        sysPara->status.reclaimTankstatus = 2;
-//        setRunStatus(sysPara->devOp->isReclaimTankCloseEnable()?tr("正在关闭回收槽..."):tr("停止关闭"));
-        setReclaimStatus(false, 100);
-        if(!sysPara->para.reclaimTankTime){
-//            LogInfo::setRunStatusText(tr("警告!回收槽开关时间未设置!"));
-        }
+
        sysPara->status.currReclaimOperationCnt = 0;
        sysPara->status.reclainTankReachEnd = false;
        sysPara->status.reclainOpenAppending = false;
        sysPara->status.reclainCloseAppending = true;
-        sysPara->status.reclaimBlockedCnt = 0;
-
-        enablePrintButton(false);
-
+        sysPara->status.reclaimTankstatus = 2;
        stopFlashReclaimOpenBtn();
+
+        // 收回收槽，把READY状态切换回自检状态（仅仅状态机的自检状态，不自检）
+        auto mgr = PrinterStateManager::instance();
+        if (mgr && mgr->isState(PrinterState::READY)) {
+            mgr->requestTransition(PrinterEvent::ReSelfCheck);
+        }
    }
 }

@@ -1680,20 +1694,9 @@ void MainWidget::updateSysStatusToUI(){ //100ms
                m_PrintDisplay->updateSysStatusToUI();
            }
        }
-//        emit setCNT1Select(found_CNT1);
-//        emit setCNT2Select(found_CNT2);
-//        emit setCNT3Select(found_CNT3);
-        if(sysPara->para.isEnableGetDataButton)
-        {
-        //    ui->pushButtonGetData->setEnabled(true);
-        }
-        else
-        {
-        //    ui->pushButtonGetData->setEnabled(false);
-        }
-        if(TEST_MODE)
-            enablePrintButton(true);
-//        ui->label_size->setText(tr("%1/%2/%3").arg(sysPara->status.sizeFPGA).arg(sysPara->status.sizequeueFPGA).arg(sysPara->status.sizeSTM32));
+
+//        if(TEST_MODE)
+//            enablePrintButton(true);
        if(oldSizeFpga != sysPara->status.sizeFPGA){
            oldSizeFpga = sysPara->status.sizeFPGA;
        }
@@ -2130,45 +2133,22 @@ void MainWidget::updatePrintDisplayLabel()
    m_PrintDisplay->update();
 }

+static short recycleWarnTimes = 0;
 void MainWidget::RefreshStatusLight(){//100ms
    if(sysPara){
-        static int hdint = 0;
-        static int reclainTankReachEnd = 0;
-        if((!(sysPara->status.statWarn & WARN_STATUS_HDINT)) && (hdint == 0)) { //喷头盖由开变关
-            // 检查回收槽是否到底，到底才能打印
-            if (sysPara->status.reclainTankReachEnd) {
-                // sysPara->devOp->highVoltageCtrl(sysPara->para.HighVoltageAmplitude);
-                enablePrintButton(true);
-            } else {
-                enablePrintButton(false);
-            }
-        }
-        hdint = !(sysPara->status.statWarn & WARN_STATUS_HDINT);
-
-        if(sysPara->status.reclainTankReachEnd && reclainTankReachEnd == 0) { //开回收槽到底
-            if (!(sysPara->status.statWarn & WARN_STATUS_HDINT)) { //喷头盖是关闭的状态
-                // sysPara->devOp->highVoltageCtrl(sysPara->para.HighVoltageAmplitude);
-            }
-        }
-        reclainTankReachEnd = sysPara->status.reclainTankReachEnd;
-
        if(sysPara->status.lastStatWarn != sysPara->status.statWarn || flagOfClearHighVltageWarnning){
            if(!(sysPara->status.statWarn & WARN_STATUS_INK_SWINT)){//墨线开关
-//                ui->labelStatusInkSwint->setPixmap(QPixmap(QString::fromUtf8(":/image/ALARMGreen.PNG")));
                alarmStatus.inkSwint = DEV_STATUS_GREEN;
            }
            else {
-//                ui->labelStatusInkSwint->setPixmap(QPixmap(QString::fromUtf8(":/image/ALARMRed.PNG")));
               alarmStatus.inkSwint = DEV_STATUS_RED;
            }


            if(!(sysPara->status.statWarn & WARN_STATUS_SUMP_WARN)){		//液位渗漏，高电平警告
-//                ui->labelStatusInkLeak->setPixmap(QPixmap(QString::fromUtf8(":/image/ALARMGreen.PNG")));
                 alarmStatus.inkLeak = DEV_STATUS_GREEN;
            }
            else {
-//                ui->labelStatusInkLeak->setPixmap(QPixmap(QString::fromUtf8(":/image/ALARMRed.PNG")));
                alarmStatus.inkLeak = DEV_STATUS_RED;
                strTitle = tr("墨水缸满报警");
                if(sysPara->devOp->isMixValveOpen()) {
@@ -2176,70 +2156,55 @@ void MainWidget::RefreshStatusLight(){//100ms
                }
            }
            if(!(sysPara->status.statWarn & WARN_STATUS_INK_WARN)){
-//                ui->labelStatusInkWaterLevel->setPixmap(QPixmap(QString::fromUtf8(":/image/ALARMGreen.PNG")));
                alarmStatus.inkWaterLevel = DEV_STATUS_GREEN;
            }
            else {
-//                ui->labelStatusInkWaterLevel->setPixmap(QPixmap(QString::fromUtf8(":/image/ALARMRed.PNG")));
                 alarmStatus.inkWaterLevel = DEV_STATUS_RED;
-                strTitle = tr("墨水液位报警");
-
-
+                 strTitle = tr("墨水液位报警");
            }
            if(!(sysPara->status.statWarn & WARN_STATUS_SOLV_WARN)){
-//                ui->labelStatusSolvLevelWarn->setPixmap(QPixmap(QString::fromUtf8(":/image/ALARMGreen.PNG")));
                 alarmStatus.solveLevelWarn = DEV_STATUS_GREEN;
            }
            else {
-//                ui->labelStatusSolvLevelWarn->setPixmap(QPixmap(QString::fromUtf8(":/image/ALARMRed.PNG")));
                alarmStatus.solveLevelWarn = DEV_STATUS_RED;
                strTitle = tr("溶剂液位报警");
-
            }

            if(!(sysPara->status.statWarn & WARN_STATUS_RECYCLE_FAULT) ){
-//                ui->labelStatusRecycleWarn->setPixmap(QPixmap(QString::fromUtf8(":/image/ALARMGreen.PNG")));
                 alarmStatus.recycleWarn = DEV_STATUS_GREEN;
-
+                 recycleWarnTimes = 0;
            }
            else {
-//                ui->labelStatusRecycleWarn->setPixmap(QPixmap(QString::fromUtf8(":/image/ALARMRed.PNG")));
-                alarmStatus.recycleWarn = DEV_STATUS_RED;
+                // 实际使用中这个报警很容易触发，决定添加防抖
+                if (recycleWarnTimes++ > 30) {
+                    alarmStatus.recycleWarn = DEV_STATUS_RED;
+                }
            }

-            //static int HVfaultCnt=0;
            if(!(sysPara->status.statWarn & WARN_STATUS_POWER_MON)){
                if(!sysPara->status.lastHighVoltageFault)
                {
                    flagOfClearHighVltageWarnning = false;
-//                    ui->labelStatusHighVoltageFault->setPixmap(QPixmap(QString::fromUtf8(":/image/ALARMGreen.PNG")));
-                      alarmStatus.highVoltageFault = DEV_STATUS_GREEN;
+                    alarmStatus.highVoltageFault = DEV_STATUS_GREEN;
                }
-                //  HVfaultCnt=0;
                //sysPara->status.HVFaultCloseEn=0;
            }
            else {
-//                ui->labelStatusHighVoltageFault->setPixmap(QPixmap(QString::fromUtf8(":/image/ALARMRed.PNG")));
-                 alarmStatus.highVoltageFault = DEV_STATUS_RED;
-                if(startPrintingFlag && printintFlag){		//已经在打印，则暂停打印                               2013-9-15高压报警停止充电
-//                    on_pushButtonPausePrint_pressed();
+                alarmStatus.highVoltageFault = DEV_STATUS_RED;
+                if(sysPara->status.isPrinting){		//已经在打印，则暂停打印                               2013-9-15高压报警停止充电
                    on_m_StopBtn_clicked();
                    LogInfo::setRunStatusText(tr("高压故障，暂停打印"));
                    setRunStatus(tr("高压故障，暂停打印"));
-
                    strTitle = tr("高压故障，暂停打印.");
-
                    sysPara->status.lastHighVoltageFault = true;
                }

                if((sysPara->status.currReclaimTankPos != 0) &&  sysPara->para.HVFaultCloseEn )
                {
-                    //HVfaultCnt++;
                    //  高压故障关回收槽
                    if(sysPara->status.HVFaultCloseEn==0){
                        sysPara->status.reclaimTankBlockedAppending=0;
                        sysPara->status.reclaimCloseCnt=100;
-//                        on_pushButtonReclaimTankClose_pressed();
                        on_m_LeftBtn_clicked();
                        sysPara->status.reclaimTankBlockedAppending=1;
                        LogInfo::setRunStatusText(tr("高压故障，关回收槽"));
@@ -2255,17 +2220,14 @@ void MainWidget::RefreshStatusLight(){//100ms
        sysPara->status.lastStatWarn = sysPara->status.statWarn;
        if(sysPara->status.lastViscosityFault != sysPara->status.viscosityFault){
            if(sysPara->status.viscosityFault==0){
-//                ui->labelStatusViscosityWarn->setPixmap(QPixmap(QString::fromUtf8(":/image/ALARMGreen.PNG")));
                 alarmStatus.viscosityWarn = DEV_STATUS_GREEN;
            }
            else {
                if(sysPara->status.viscosityFault==1){

-//                    ui->labelStatusViscosityWarn->setPixmap(QPixmap(QString::fromUtf8(":/image/ALARMRed.PNG")));
                    alarmStatus.viscosityWarn = DEV_STATUS_RED;
                }
                else if(sysPara->status.viscosityFault==2) {
-//                    ui->labelStatusViscosityWarn->setPixmap(QPixmap(QString::fromUtf8(":/image/ALARMYellow.PNG")));
                    alarmStatus.viscosityWarn = DEV_STATUS_YELLOW;
                }
            }
@@ -2275,7 +2237,6 @@ void MainWidget::RefreshStatusLight(){//100ms
        if(!(sysPara->status.statWarn & WARN_STATUS_RECYCLE_FAULT)){                                            //20140211 nie
            if(sysPara->status.RecycleWarnCnt)
                alarmStatus.recycleWarn = DEV_STATUS_GREEN;
-//                ui->labelStatusRecycleWarn->setPixmap(QPixmap(QString::fromUtf8(":/image/ALARMGreen.PNG")));
            sysPara->status.RecycleWarnCnt = 0;
            sysPara->status.lastRecycleWarn = 0;
        }
@@ -2286,7 +2247,6 @@ void MainWidget::RefreshStatusLight(){//100ms
                {
                    sysPara->status.lastRecycleWarn = RECYCLE_WARN_DELAY;//5s
                    alarmStatus.recycleWarn = DEV_STATUS_RED;
-//                    ui->labelStatusRecycleWarn->setPixmap(QPixmap(QString::fromUtf8(":/image/ALARMRed.PNG")));
                    sysPara->status.reclaimCloseCnt=100;
                    if(sysPara->para.RecycleWarnAction)
                    {
@@ -2314,12 +2274,6 @@ void MainWidget::RefreshStatusLight(){//100ms
            else if(sysPara->status.lastRecycleWarn)sysPara->status.lastRecycleWarn--;
        }

-//        if(startPrintingFlag ){
-//            if(printintFlag)
-//                setRunStatus(tr("正在喷印..."));
-//            else
-//                setRunStatus(tr("暂停喷印..."));
-//        }

        if(sysPara->status.isPrinting && sysPara->status.selfCheckDone){
                setRunStatus(tr("正在喷印......."));
@@ -2347,7 +2301,7 @@ bool MainWidget::updatePhaseIndicatorLight(){
    if(sysPara==0) return 0;

    /*------------------------------------------喷头盖未关或回收槽未全部打开的时候不报相位故障-------------------------------------------------*/
-    if((!sysPara->status.flight_tm_error && !sysPara->status.detect_phase_error) || (sysPara->status.statWarn & WARN_STATUS_HDINT) || !sysPara->status.reclainTankReachEnd){
+    if((!sysPara->status.flight_tm_error && !sysPara->status.detect_phase_error) || !sysPara->status.reclainTankReachEnd){
        //故障后必须等手动按故障恢复才会继续
        if(!sysPara->para.suspendAfterPhaseFault && !sysPara->para.powerOffAfterPhaseFault){
            if(sysPara->status.lastPhaseFault){
@@ -2538,11 +2492,8 @@ bool MainWidget::checkTriggerMode()
    }
 #endif

-    bool MaxCol4000;
-    if(sysPara->status.flagOfNo67FPGA)
-        MaxCol4000 = true;
-    else
-        MaxCol4000 = false;
+    bool MaxCol4000 = sysPara->status.flagOfNo67FPGA;
+
    if(sysPara->status.currPrintCol > (MaxCol4000?MAX_PRINT_COL_NUM_Normal:MAX_PRINT_COL_NUM_Wide)){
        QMessageBox::critical(0,tr("错误"),tr("当前总列数 %1 ,支持的总列数为 %2,请减少打印串的长度").arg(sysPara->status.currPrintCol).arg((MaxCol4000?MAX_PRINT_COL_NUM_Normal:MAX_PRINT_COL_NUM_Wide)));
        return false;
@@ -2622,12 +2573,26 @@ void MainWidget::onLabelFaultRusumePressed(){
            sysPara->devOp->mainInkCtrl();
            emit clearPressureFault();
        }
-        if(printintFlag) {
+        if(sysPara->status.isPrinting) {
            sysPara->devOp->highVoltageCtrl(sysPara->para.HighVoltageAmplitude);
        }
    }
 }

+void MainWidget::slt_resetCNT1()
+{
+    sysPara->para.cnt1CurrValue = printSettingsModel.cnt1Settings.currValue;
+    sysPara->para.cnt2CurrValue =  QString::number(sysPara->status.calandar_and_dat.cnt2CurrValue,16).toInt();
+    sysPara->devOp->writeFpgaCalandar(false);
+}
+
+void MainWidget::slt_resetCNT2()
+{
+    sysPara->para.cnt1CurrValue = QString::number(sysPara->status.calandar_and_dat.cnt1CurrValue,16).toInt();
+    sysPara->para.cnt2CurrValue = printSettingsModel.cnt2Settings.currValue;
+    sysPara->devOp->writeFpgaCalandar(false);
+}
+
 extern int baudRateValue;
 void MainWidget::UpdateUIVersion(){
    int fpgaType = sysPara->status.fpgaVersionNum>>12;
@@ -29,6 +29,8 @@
 #include "fileManage/FileManageWidget.h"

 #include "setnumdlg.h"
+#include "PrintSetting.h"
+#include "PressureMonitor.h"

 class MainWidget : public QWidget
 {
@@ -45,9 +47,10 @@ public:
     * @brief 生成打印内容，并发送打印内容到 FPGA
     * 
     * @param pPicScene 包含打印内容的场景
+     * @param printSettings 打印内容所需要的打印设置
     * @return 成功返回true，否则false，查看日志
     */
-    bool generatePrintContent(PicScene* pPicScene);
+    bool generatePrintContent(PicScene* pPicScene, const PrintSettingModel& printSettings);

    /**
     * @brief 重新生成打印内容，所用场景是由调用 generatePrintContent 时设置的，generatePrintContent 也会调用此函数
@@ -60,8 +63,6 @@ public:

    QString strWarring,strTitle;
    bool m_2sFlag;
-    bool printintFlag;			//判断当前是否在打印
-    bool startPrintingFlag;

    bool pushButtonFlag;
    
@@ -89,7 +90,8 @@ public:

    void setRunStatus(QString str, bool enbRoll = true, bool warn = false);
    void enablePrintButton(bool);
-    int getCurrPrintStatus();
+    void enabeleStartBtn(bool);
+    void enabeleStopBtn(bool);

    // 回收槽开启按钮状态设置
    void setReclaimOpenBtnStatus(bool enable);
@@ -107,10 +109,8 @@ public:

    /**
     * @brief 设置回收槽开关状态
-     * @param isOpen true：开；false：关
-     * @param rate 回收槽开启程度，0~100；
     */
-    void setReclaimStatus(bool isOpen, int rate = 0);
+    void updateReclaimText();

    void updateSysStatusToUI();		//重载
    //Mainwindow获取机器总状态
@@ -138,8 +138,7 @@ public:
    bool flagOfClearHighVltageWarnning;

    AlarmStatus alarmStatus;
-
-//    void mouseDoubleClickEvent(QMouseEvent *event) override;
+    bool powerOnWarn = false;

 private:
    // UI对象
@@ -163,8 +162,11 @@ private:
    int r_ExpiryDay;
    QTimer *airPushTimer;

+    PressureMonitor *m_pressureMonitor = nullptr;
+
    PicScene *pPicScene = nullptr;
    QGraphicsView *view;
+    PrintSettingModel printSettingsModel;

    FileManageWidget *m_fileManageWidget = nullptr;

@@ -192,7 +194,8 @@ public slots:
    void _on_pushButtonPowerOff_pressed(bool notice);

    void onLabelFaultRusumePressed();
-
+    void slt_resetCNT1();
+    void slt_resetCNT2();
    void UpdateUIVersion();

    void on_m_RightBtn_clicked();
@@ -196,17 +196,20 @@ private:
    std::function<void()> m_confirmCallback;
    int waitStatus();
    bool waitCard();
+
 signals:
    void sig_showMsg(QString msg);

    void sig_maintenanceShow();

-        // 墨水流程已完成，（墨水、刷卡均已完成）
+    // 墨水流程已完成，（墨水、刷卡均已完成）
    void sig_inkCardProgressFinished();

    // 溶剂流程已完成
    void sig_solventProgressFinished();

+    // 告警累计 3 小时，请求关喷嘴
+    void sig_warnTimeout(QString);

 private slots:
    //接收刷卡数据槽函数
@@ -219,4 +222,4 @@ private slots:
    // void slt_intervalTimerHandle();
 };

-#endif // RFIDMANAGER_H
+#endif // RFIDMANAGER_H
@@ -125,7 +125,7 @@ void PicCounterItem::setCustomAttrs(const QXmlStreamAttributes &attrs)

    ok = false;
    int displayNum = displayNumRef.toInt(&ok);
-    if(!ok || displayNum <= 0) {
+    if(!ok /*|| displayNum <= 0*/) {
        qWarning() << "Invalied counter display number: " << displayNum;
        return;
    }
@@ -14,6 +14,12 @@ SetNumDlg::SetNumDlg(QWidget *parent) :

    ui->btn_confirm->setAutoDefault(false);  // 禁止回车自动触发
    ui->btn_confirm->setDefault(false);      // 彻底取消默认按钮
+
+    connect(ui->btn_resetCnt1, &QPushButton::clicked, this, &SetNumDlg::sig_resetCNT1);
+    connect(ui->btn_resetCnt2, &QPushButton::clicked, this, &SetNumDlg::sig_resetCNT2);
+
+    // 默认禁用 重置计数器1 重置计数器2 的按钮
+    setCNTResetBtnsEnable(false, false);
 }

 SetNumDlg::~SetNumDlg()
@@ -40,6 +46,12 @@ void SetNumDlg::on_btn_confirm_clicked()
    emit sig_setNum();
 }

+void SetNumDlg::setCNTResetBtnsEnable(bool cnt1Btn, bool cnt2Btn)
+{
+    ui->btn_resetCnt1->setEnabled(cnt1Btn);
+    ui->btn_resetCnt2->setEnabled(cnt2Btn);
+}
+
 void SetNumDlg::on_btn_clearProductCnt_clicked()
 {
    emit sig_clearCnt();
@@ -19,6 +19,14 @@ public:

    int getNum();

+    /**
+     * @brief 设置对话框中，重置计数器1/2 的两个按钮的可用性
+     * 
+     * @param cnt1Btn 重置计数器1 按钮的可用性
+     * @param cnt2Btn 重置计数器2 按钮的可用性
+     */
+    void setCNTResetBtnsEnable(bool cnt1Btn, bool cnt2Btn);
+
 private slots:
    void on_btn_confirm_clicked();

@@ -34,6 +42,10 @@ signals:
    void sig_setNum();

    void sig_clearCnt();
+
+    void sig_resetCNT1();
+
+    void sig_resetCNT2();
 };

 #endif // SETNUMDLG_H
@@ -87,7 +87,7 @@
   <property name="geometry">
    <rect>
     <x>20</x>
-     <y>160</y>
+     <y>130</y>
     <width>111</width>
     <height>61</height>
    </rect>
@@ -96,6 +96,32 @@
    <string>清空产品计数</string>
   </property>
  </widget>
+  <widget class="QPushButton" name="btn_resetCnt1">
+   <property name="geometry">
+    <rect>
+     <x>20</x>
+     <y>220</y>
+     <width>131</width>
+     <height>41</height>
+    </rect>
+   </property>
+   <property name="text">
+    <string>重置计数器1</string>
+   </property>
+  </widget>
+  <widget class="QPushButton" name="btn_resetCnt2">
+   <property name="geometry">
+    <rect>
+     <x>160</x>
+     <y>220</y>
+     <width>131</width>
+     <height>41</height>
+    </rect>
+   </property>
+   <property name="text">
+    <string>重置计数器2</string>
+   </property>
+  </widget>
 </widget>
 <tabstops>
  <tabstop>cb_setNum</tabstop>
@@ -146,7 +146,7 @@ TestPrintWidget::TestPrintWidget(QWidget* parent)
        vm.letterSpace = 1;
        vm.cnt1Settings = m_printSettingModel.cnt1Settings;
        vm.cnt2Settings = m_printSettingModel.cnt2Settings;
-        emit sig_showEditCounter(vm);
+        emit sig_showEditCounter(vm, false);
    });

    connect(ui.btnBarcode, &QPushButton::clicked, [this](){
@@ -201,6 +201,8 @@ TestPrintWidget::TestPrintWidget(QWidget* parent)
    
    // 网络通信，暂时屏蔽
    // ui.btnList->hide();
+
+    connect(ui.btnSaveAs, &QPushButton::clicked, this, &TestPrintWidget::onBtnSaveAsClicked);
 }

 void TestPrintWidget::bindSysPara(SysPara *sysPara)
@@ -713,7 +715,7 @@ void TestPrintWidget::onBtnItemConfigClicked()
        vm.charWidth = counterItem->charWidth();
        vm.cnt1Settings = m_printSettingModel.cnt1Settings;
        vm.cnt2Settings = m_printSettingModel.cnt2Settings;
-        emit sig_showEditCounter(vm);
+        emit sig_showEditCounter(vm, true);
        }
        return;
    }
@@ -1048,6 +1050,12 @@ void TestPrintWidget::addCounterItem(CounterViewModel vm, QSharedPointer<QFont>
        }
    }

+    // 最多两个计数器
+    if (getCounterNum() >= 2 && !flag) {
+        QMessageBox::warning(this, tr("警告"),tr("无法创建更多计数器"));
+        return;
+    }
+
    QVector<int> currVals{vm.cnt1Settings.currValue, vm.cnt2Settings.currValue};

    QFont font;
@@ -1098,6 +1106,19 @@ void TestPrintWidget::addCounterItem(CounterViewModel vm, QSharedPointer<QFont>
    updateCountersCurrVal(currVals);
 }

+int TestPrintWidget::getCounterNum()
+{
+    int count = 0;
+    const QList<QGraphicsItem *> items = pPicScene->items();
+    for (QGraphicsItem *it : items) {
+        if (auto *counter = dynamic_cast<PicCounterItem *>(it)) {
+            Q_UNUSED(counter);
+            ++count;
+        }
+    }
+    return count;
+}
+
 QString TestPrintWidget::currentFile()
 {
    return xmlfileName;
@@ -1159,3 +1180,18 @@ void TestPrintWidget::on_btn_paste_clicked()
 {
    pasteCopiedLayer();
 }
+
+void TestPrintWidget::onBtnSaveAsClicked()
+{
+    dialogSaveFile->refreshListView(SCENE);
+    dialogSaveFile->setEnterFileName("");
+    auto ret = dialogSaveFile->exec();
+    
+    if(ret == QDialog::Accepted) {
+        auto filename = dialogSaveFile->filename();
+        if(!filename.endsWith(".xml",Qt::CaseInsensitive))
+            filename += ".xml";
+
+        saveFile(filename);
+    }
+}
@@ -58,6 +58,8 @@ public:

    void addCounterItem(CounterViewModel vm, QSharedPointer<QFont> font = nullptr);

+    int getCounterNum();
+
    QString currentFile();

    // 更新编辑界面内所有计数器的当前值
@@ -108,6 +110,8 @@ private slots:
    // 粘贴
    void on_btn_paste_clicked();

+    void onBtnSaveAsClicked();
+
 private:
    // UI对象
    Ui::TestPrintWidget ui;
@@ -174,7 +178,7 @@ signals:

    void sendButtonClickedSignal(int index);

-    void sig_showEditCounter(CounterViewModel viewModel);
+    void sig_showEditCounter(CounterViewModel viewModel, bool isChange);

    // 用户请求打开日期类型图元编辑窗口时发送此信号
    void sig_showEditDateTime(DateItemModel dateModel, TextItemModel textModel);
@@ -1,5 +0,0 @@
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
-<html><head><meta name="qrichtext" content="1" /><meta http-equiv="Content-Type" content="text/html; charset=UTF-8" /><style type="text/css">
-p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'songti'; font-size:12pt; font-weight:400; font-style:normal;">
-<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">f</p></body></html>
@@ -1,5 +0,0 @@
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
-<html><head><meta name="qrichtext" content="1" /><meta http-equiv="Content-Type" content="text/html; charset=UTF-8" /><style type="text/css">
-p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'songti'; font-size:12pt; font-weight:400; font-style:normal;">
-<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">fdafdsa</p></body></html>
@@ -1,5 +0,0 @@
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
-<html><head><meta name="qrichtext" content="1" /><meta http-equiv="Content-Type" content="text/html; charset=UTF-8" /><style type="text/css">
-p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'songti'; font-size:12pt; font-weight:400; font-style:normal;">
-<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">化公为私于机构改革讨价还价液恭恭敬敬用同方</p></body></html>
@@ -1,5 +0,0 @@
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
-<html><head><meta name="qrichtext" content="1" /><meta http-equiv="Content-Type" content="text/html; charset=UTF-8" /><style type="text/css">
-p, li { white-space: pre-wrap; }
-</style></head><body style=" font-family:'songti'; font-size:12pt; font-weight:400; font-style:normal;">
-<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'helvetica'; font-size:8pt; font-weight:200;">yujhfdddeef</span><img src=":/6/image/digitalWidth2.png" width="10" height="8" /></p></body></html>
Author	SHA1	Message	Date
kite_lucs	a126db221b	hlp:更新翻译，开机报警不可以开回收槽，运行中报警缺少3h后自动收喷嘴;新增粘度阈值设置界面，提醒粘度异常情况，严重越界自动收喷嘴	2026-09-24 10:19:15 +08:00
kite_lucs	7ec427097e	hlp:新增粘度报警界面（未完成）	2026-09-21 10:46:02 +08:00
kite_lucs	a18665b5f9	hlp:最多添加两个计数器，编辑计数器图元，只显示当前计数器的修改tab	2026-09-19 08:16:46 +08:00
kite_lucs	b7e155d063	hlp:更新翻译、喷嘴到底后等至少3秒检查相检、状态机统一打印和回收槽状态、修复数字键盘输入bug	2026-09-18 15:20:13 +08:00
kite_lucs	af37661b74	hlp:状态机初版，统一管理回收槽状态，启动和停止打印时的状态	2026-09-16 16:53:19 +08:00
byons	888c1cd724	更新检查翻译、更新版本号	2026-09-16 14:13:36 +08:00
byons	5942564f5e	更新压力稳定判定算法	2026-09-15 17:07:46 +08:00
byons	d48826b028	更新韩语翻译	2026-09-15 09:32:21 +08:00
byons	7c755537a1	为压力检测器添加超时机制、更新翻译	2026-09-15 09:14:17 +08:00
byons	0bc587e989	压力监视等待初版	2026-09-14 17:08:21 +08:00
byons	96c5fab758	主界面小对话框中添加计数器重置按钮	2026-09-12 08:34:25 +08:00
byons	7d411deab0	修改外部同步器的编辑逻辑、添加‘另存为’ 按钮	2026-09-11 16:12:28 +08:00