优化RFID流程逻辑、修改自检流程，关闭循环阀
This commit is contained in:
+316
-187
@@ -37,8 +37,8 @@ InkJetPrinter::InkJetPrinter(QWidget* parent)
|
||||
QThread::sleep(3);
|
||||
qApp->installEventFilter(this);
|
||||
|
||||
QString ARM_Version;
|
||||
ARM_Version.sprintf("%d.%d.%02d%s%s", UP_PRINTER_MAJOR_VER, UP_PRINTER_MINOR_VER,UP_PRINTER_RIVISION_VER,SUB_VERSION,SUB_RFID);
|
||||
// QString ARM_Version;
|
||||
// ARM_Version.sprintf("%d.%d.%02d%s%s", UP_PRINTER_MAJOR_VER, UP_PRINTER_MINOR_VER,UP_PRINTER_RIVISION_VER,SUB_VERSION,SUB_RFID);
|
||||
// ui.label_version->setText(QString("A%1/F%2.%3.%4").arg(ARM_Version).arg(sysPara->status.fpgaVersionNum >> 12)
|
||||
// .arg((sysPara->status.fpgaVersionNum>>8) & 0x0f).arg(sysPara->status.fpgaVersionNum&0xff) );
|
||||
|
||||
@@ -174,6 +174,8 @@ void InkJetPrinter::init()
|
||||
|
||||
connect(m_MainInstruction,&MainInstruction::newFileBtnClick,m_TestPrintWidget,&TestPrintWidget::on_newfileButton_pressed);
|
||||
|
||||
connect(m_MainInstruction, &MainInstruction::superJmAccepted, this, &InkJetPrinter::resetRFIDStatus);
|
||||
|
||||
// connect(myInputMethod,&MyInputMethod::sendEnterClickedSignal,&TestPrintWidget::onEditItemDone);
|
||||
// connect(myInputMethod,SIGNAL(sendEnterClickedSignal()),m_TestPrintWidget,SLOT(onEditItemDone()));
|
||||
connect(m_DateVarSet,SIGNAL(backSpaceBtn()),myInputMethod,SLOT(backSapceButtonDel()));
|
||||
@@ -292,7 +294,7 @@ void InkJetPrinter::slt_warningMaintenance()
|
||||
{
|
||||
// 距离维护时间结束大于30天，判断运行时间的检测
|
||||
if (timeoutDay >= 30) {
|
||||
double runHours = sysPara->RFIDPara.runTime / 60.0 / 60.0;
|
||||
double runHours = sysPara->RFIDPara.runtimeMs / 1000.0 / 60.0 / 60.0;
|
||||
double hours = sysPara->RFIDPara.maintenanceHours - runHours;
|
||||
QString str;
|
||||
if (hours >= 0) {
|
||||
@@ -1039,10 +1041,11 @@ void InkJetPrinter::timerHandler(void){
|
||||
// 自检完成后管道恢复正常阻力，重置软启动让压力重新平稳收敛
|
||||
// 不清零 u，从当前控制字开始，避免突变
|
||||
u = (float)sysPara->para.gearPumpValue;
|
||||
m_rampDone = false;
|
||||
m_adjSkip = 0;
|
||||
m_lastPressure = 0;
|
||||
m_stableCount = 0;
|
||||
// m_rampDone = false;
|
||||
// m_adjSkip = 0;
|
||||
// m_lastPressure = 0;
|
||||
// m_stableCount = 0;
|
||||
autoControlValvePump();
|
||||
for(int i = 0; i < 10; i++) m_pressureBuf[i] = 0;
|
||||
m_bufIdx = 0;
|
||||
|
||||
@@ -2174,28 +2177,13 @@ void InkJetPrinter::autoControlValvePump(void)
|
||||
}
|
||||
|
||||
/*----------------------------------循环阀-------------------------------------------*/
|
||||
if(!sysPara->status.selfCheckDone || (sysPara->status.needPowerOffTimerout && sysPara->para.gearPumpEnable)){
|
||||
// if(!sysPara->devOp->isCycleValveOpen()){ //循环阀 //定时开机循环时隔膜泵不开关循环阀
|
||||
// sysPara->devOp->controlCycleValve(true);
|
||||
// }
|
||||
cycleValveRunForSelfCheck();
|
||||
if(sysPara->status.needPowerOffTimerout)
|
||||
{
|
||||
if(sysPara->devOp->isMixValveOpen()) { //
|
||||
sysPara->devOp->controlMixValve(false);
|
||||
}
|
||||
if(!sysPara->status.selfCheckDone) {
|
||||
if(!sysPara->devOp->isCycleValveOpen()) {
|
||||
sysPara->devOp->controlCycleValve(false);
|
||||
}
|
||||
}
|
||||
else {
|
||||
if(sysPara->status.cycleValveOpenCntAfterSWintOff){ // 开循环阀
|
||||
if(!sysPara->devOp->isCycleValveOpen()){
|
||||
sysPara->devOp->controlCycleValve(true);
|
||||
}
|
||||
sysPara->status.cycleValveOpenCntAfterSWintOff --;
|
||||
}
|
||||
else if(sysPara->devOp->isCycleValveOpen()){ // 关循环阀
|
||||
sysPara->devOp->controlCycleValve(false);
|
||||
}
|
||||
autoControlCycleValve();
|
||||
}
|
||||
|
||||
/*----------------------------------泄压阀-------------------------------------------*/
|
||||
@@ -2438,6 +2426,33 @@ void InkJetPrinter::autoControlValvePump(void)
|
||||
}
|
||||
}
|
||||
|
||||
void InkJetPrinter::autoControlCycleValve()
|
||||
{
|
||||
if(!sysPara->status.selfCheckDone || (sysPara->status.flagOfPowerOnMode && sysPara->para.gearPumpEnable)){
|
||||
// if(!sysPara->devOp->isCycleValveOpen()){ //循环阀 //定时开机循环时隔膜泵不开关循环阀
|
||||
// sysPara->devOp->controlCycleValve(true);
|
||||
// }
|
||||
cycleValveRunForSelfCheck();
|
||||
if(sysPara->status.flagOfPowerOnMode)
|
||||
{
|
||||
if(sysPara->devOp->isMixValveOpen()) { //
|
||||
sysPara->devOp->controlMixValve(false);
|
||||
}
|
||||
}
|
||||
}
|
||||
else {
|
||||
if(sysPara->status.cycleValveOpenCntAfterSWintOff){ // 开循环阀
|
||||
if(!sysPara->devOp->isCycleValveOpen()){
|
||||
sysPara->devOp->controlCycleValve(true);
|
||||
}
|
||||
sysPara->status.cycleValveOpenCntAfterSWintOff --;
|
||||
}
|
||||
else if(sysPara->devOp->isCycleValveOpen()){ // 关循环阀
|
||||
sysPara->devOp->controlCycleValve(false);
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
//在开机自检过程中交替打开和关闭循环阀
|
||||
void InkJetPrinter::cycleValveRunForSelfCheck(){
|
||||
static int cycleValveOpenCnt = 0;
|
||||
@@ -2862,52 +2877,9 @@ void InkJetPrinter::warningHandler(int type){
|
||||
LogInfo::setRunStatusText("Next Hour Warning");
|
||||
}
|
||||
int inkTime = 0, solventTime = 0;
|
||||
if (type == CARD_TYPE::INK) {
|
||||
// 只有当报警标志为true时，文件的时间才会更新，此时才读取
|
||||
if(sysPara->para.flagOfInkWarning) {
|
||||
int dateTimeDiff = updateWarningTime(type);
|
||||
if (dateTimeDiff > 60*60*24*2) {
|
||||
sysPara->RFIDPara.inkCardTimeOut = true;
|
||||
}
|
||||
inkTime = sysPara->RFIDPara.inkCardTimeOut ? 49 : (48 - dateTimeDiff/60/60);
|
||||
}
|
||||
if(sysPara->RFIDPara.inkCardTimeOut && flagOfWarning){
|
||||
if(++sysPara->status.showInkWarningNumber >= INTERVAL_AFTER48H){
|
||||
warningShow(CARD_TYPE::INK,49);
|
||||
sysPara->status.showInkWarningNumber = 0;//是否有必要保存?
|
||||
sysPara->saveRFIDPara();
|
||||
flagOfWarning = false;
|
||||
return;
|
||||
}
|
||||
}
|
||||
sysPara->saveRFIDPara();
|
||||
}
|
||||
else if(type == CARD_TYPE::SOLVENT) {
|
||||
//只有当报警标志为true时，文件的时间才会更新，此时才读取
|
||||
if (sysPara->para.flagOfSolventWarning) {
|
||||
int dateTimeDiff = updateWarningTime(type);
|
||||
if (dateTimeDiff > 60*60*24*2) {
|
||||
sysPara->RFIDPara.solventCardTimeOut = true;
|
||||
}
|
||||
|
||||
if (!sysPara->RFIDPara.solventCardTimeOut)
|
||||
solventTime = 48- dateTimeDiff / 60 / 60;
|
||||
}
|
||||
|
||||
if(sysPara->RFIDPara.solventCardTimeOut && flagOfWarning){
|
||||
if(++sysPara->status.showSolventWarningNumber >= INTERVAL_AFTER48H){
|
||||
warningShow(CARD_TYPE::SOLVENT,49);
|
||||
sysPara->status.showSolventWarningNumber = 0;
|
||||
sysPara->saveRFIDPara();
|
||||
flagOfWarning = false;
|
||||
return;
|
||||
}
|
||||
}
|
||||
|
||||
sysPara->saveRFIDPara();
|
||||
}
|
||||
/***********处理保养到期提示start******************/
|
||||
else if(type == CARD_TYPE::MAINTENANCE){
|
||||
if(type == CARD_TYPE::MAINTENANCE){
|
||||
if(sysPara->RFIDPara.needMaintenance){//保养到期,喷码机禁用
|
||||
warningShow(CARD_TYPE::MAINTENANCE,timeoutDay);
|
||||
}
|
||||
@@ -2925,11 +2897,6 @@ void InkJetPrinter::warningHandler(int type){
|
||||
// 超过48小时后，不会执行这一段
|
||||
if(flagOfWarning){
|
||||
//48小时后禁用，小时=第一次提示时间到当前时间的间隔秒数/60/60
|
||||
if (type == INK && sysPara->para.flagOfInkWarning)
|
||||
warningShow(type,inkTime);
|
||||
else if (type == SOLVENT && sysPara->para.flagOfSolventWarning)
|
||||
warningShow(type,solventTime);
|
||||
|
||||
flagOfWarning = false;
|
||||
}
|
||||
}
|
||||
@@ -3077,9 +3044,10 @@ void InkJetPrinter::initRunTimeCtrl()
|
||||
});
|
||||
connect(ctrl_runTime, &RunTimeCtrl::sig_saveRunTime, this, [=]() {
|
||||
// 运行时间处理
|
||||
sysPara->RFIDPara.runTime += 30;
|
||||
sysPara->RFIDPara.runtimeMs = ctrl_runTime->totalRuntimeMs();
|
||||
sysPara->saveRFIDPara();
|
||||
});
|
||||
|
||||
// 弹窗提示
|
||||
connect(ctrl_runTime, &RunTimeCtrl::sig_alertTimeout,
|
||||
this, &InkJetPrinter::slt_warningMaintenance);
|
||||
@@ -3098,175 +3066,336 @@ void InkJetPrinter::initRFIDManager()
|
||||
{
|
||||
if (manager_rfid == nullptr) {
|
||||
manager_rfid = RFIDManager::instance();
|
||||
}
|
||||
|
||||
connect(manager_rfid, &RFIDManager::sig_showMsg,
|
||||
this, &InkJetPrinter::slt_showMsg);
|
||||
connect(manager_rfid,SIGNAL(sig_maintenanceShow()),
|
||||
m_MainInstruction,SLOT(maintenanceDialogShow()));
|
||||
|
||||
auto checkReclaimOpenBtn = [this]() {
|
||||
if(sysPara->status.selfCheckDone && (sysPara->status.reclaimTankstatus == 2 || sysPara->status.reclaimTankstatus == 6)) {
|
||||
m_MainWidget->setReclaimOpenBtnStatus(true);
|
||||
}
|
||||
// if(sysPara->status.selfCheckDone && (sysPara->status.reclaimTankstatus == 2 || sysPara->status.reclaimTankstatus == 6)) {
|
||||
// m_MainWidget->setReclaimOpenBtnStatus(true);
|
||||
// }
|
||||
};
|
||||
|
||||
connect(manager_rfid, &RFIDManager::sig_inkCardProgressFinished, this, checkReclaimOpenBtn);
|
||||
connect(manager_rfid, &RFIDManager::sig_solventProgressFinished, this, checkReclaimOpenBtn);
|
||||
connect(manager_rfid, &RFIDManager::sig_inkCardProgressFinished, this, [this](){
|
||||
sysPara->RFIDPara.needInkCard = false;
|
||||
sysPara->saveRFIDPara();
|
||||
|
||||
if(!sysPara->RFIDPara.addedInk) {
|
||||
slt_showMsg(tr("刷墨水卡成功, 请及时将该墨水卡对应的墨水添加到机器中"));
|
||||
}
|
||||
else {
|
||||
slt_showMsg(tr("刷墨水卡成功!"));
|
||||
}
|
||||
});
|
||||
|
||||
connect(manager_rfid, &RFIDManager::sig_solventProgressFinished, this, [this](){
|
||||
sysPara->RFIDPara.needSolventCard = false;
|
||||
sysPara->saveRFIDPara();
|
||||
|
||||
if(!sysPara->RFIDPara.addedSolvent) {
|
||||
slt_showMsg(tr("刷溶剂卡成功, 请及时将该溶剂卡对应的溶剂添加到机器中"));
|
||||
}
|
||||
else {
|
||||
slt_showMsg(tr("刷溶剂卡成功!"));
|
||||
}
|
||||
});
|
||||
}
|
||||
|
||||
|
||||
#define MAX_WARNING_TIME_HOUR 48
|
||||
#define WARNING_INTERVAL_SEC 3600
|
||||
|
||||
#ifdef BNS_DEBUG
|
||||
|
||||
#undef MAX_WARNING_TIME_HOUR
|
||||
#undef WARNING_INTERVAL_SEC
|
||||
|
||||
#define MAX_WARNING_TIME_HOUR 10
|
||||
#define WARNING_INTERVAL_SEC 20
|
||||
|
||||
#endif
|
||||
|
||||
void InkJetPrinter::resetRFIDStatus()
|
||||
{
|
||||
if(!sysPara)
|
||||
return;
|
||||
|
||||
// 停止刷卡请求
|
||||
if(manager_rfid) {
|
||||
manager_rfid->requireInkCard(false);
|
||||
manager_rfid->requireSolventCard(false);
|
||||
}
|
||||
|
||||
sysPara->RFIDPara.needInkCard = false;
|
||||
sysPara->RFIDPara.needSolventCard = false;
|
||||
|
||||
sysPara->RFIDPara.inkCardTimeOut = false;
|
||||
sysPara->RFIDPara.solventCardTimeOut = false;
|
||||
|
||||
sysPara->saveRFIDPara();
|
||||
sysPara->saveParaToFile();
|
||||
|
||||
LogInfo::setRunStatusText("RFID/ink/solvent flows terminated by resetRFIDStatus");
|
||||
QMessageBox::information(this, "", "RFID progress has been cleaned.", QMessageBox::Ok);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief 处理墨水警告
|
||||
* 如果发生墨水警告，则进入 加墨水&刷卡 流程。
|
||||
* 该流程要求 用户加入墨水并且刷了对应的墨水卡 才退出流程。
|
||||
* 如果流程没有完成，则每隔一个小时提示一次，如果超过48小时，则sysPara->RFIDPara.inkCardTimeOut = true，禁用喷码机
|
||||
* 该流程不受关机影响
|
||||
*
|
||||
* 该函数 使用定时器 1s 调用一次
|
||||
*
|
||||
*/
|
||||
void InkJetPrinter::handleWarnInk()
|
||||
{
|
||||
static bool logFlag_inkCard = 1; // 每次启动提示一次即可
|
||||
if(!sysPara->para.flagOfInkWarning){
|
||||
if(sysPara->status.statWarn & WARN_STATUS_INK_WARN)
|
||||
if(!sysPara || !manager_rfid)
|
||||
return;
|
||||
|
||||
// 墨水盒警告抖动处理
|
||||
if(sysPara->status.statWarn & WARN_STATUS_INK_WARN) {
|
||||
sysPara->status.inkWarningCnt = qMax(0, sysPara->status.inkWarningCnt);
|
||||
sysPara->status.inkWarningCnt++; // 累计警报10次就提示
|
||||
}
|
||||
else {
|
||||
sysPara->status.inkWarningCnt = 0;
|
||||
sysPara->status.inkWarningCnt = qMin(0, sysPara->status.inkWarningCnt);
|
||||
--sysPara->status.inkWarningCnt;
|
||||
}
|
||||
|
||||
if(sysPara->status.inkWarningCnt >= DETECT_WARNING_TIME){
|
||||
// 墨水被加入后处理
|
||||
if(sysPara->status.inkWarningCnt <= -5 && sysPara->RFIDPara.inInkAndRFIDProgress) {
|
||||
if(!sysPara->RFIDPara.addedInk) {
|
||||
sysPara->RFIDPara.addedInk = true;
|
||||
sysPara->saveRFIDPara();
|
||||
|
||||
// TO RFIDManager
|
||||
if(sysPara->RFIDPara.needInkCard) {
|
||||
slt_showMsg(tr("请及时使用墨水盒附带的IC卡激活墨水盒"));
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
// 墨水盒空，进入 刷卡&加墨水 流程
|
||||
if(sysPara->status.inkWarningCnt >= DETECT_WARNING_TIME && sysPara->RFIDPara.inInkAndRFIDProgress == 0) {
|
||||
|
||||
sysPara->RFIDPara.addedInk = false;
|
||||
sysPara->RFIDPara.needInkCard = true;
|
||||
sysPara->status.showInkWarningNumber = 0;
|
||||
sysPara->RFIDPara.inInkAndRFIDProgress = 1;
|
||||
|
||||
sysPara->para.flagOfInkWarning = true;
|
||||
manager_rfid->setInkCardFirstPrompt(true);
|
||||
QString strCurDateTime = QDateTime::currentDateTime().toString("yyMMddhhmmss");
|
||||
LogInfo::setRunStatusText("Ink warning.");
|
||||
qDebug()<<"墨水液位报警";
|
||||
if(sysPara->para.inkWarnDate == 0){
|
||||
|
||||
sysPara->para.inkWarnDate = strCurDateTime.mid(0,6).toInt();
|
||||
sysPara->para.inkWarnTime = strCurDateTime.mid(6,6).toInt();
|
||||
}
|
||||
|
||||
warningShow(1, 48);
|
||||
slt_showMsg(tr("请刷墨水卡,请使用原厂墨水耗材,否则机器将在%1小时后禁止使用!").arg(MAX_WARNING_TIME_HOUR));
|
||||
|
||||
sysPara->saveParaToFile();
|
||||
}
|
||||
}
|
||||
else{
|
||||
|
||||
if(logFlag_inkCard){
|
||||
logFlag_inkCard = 0;
|
||||
QString strDate = QString::number(sysPara->para.inkWarnDate);
|
||||
QString strTime = QString::number(sysPara->para.inkWarnTime);
|
||||
QString str1 = QString::number(strDate.mid(0,2).toInt()).rightJustified(2,'0');
|
||||
QString str2 = QString::number(strDate.mid(2,2).toInt()).rightJustified(2,'0');
|
||||
QString str3 = QString::number(strDate.mid(4,2).toInt()).rightJustified(2,'0');
|
||||
QString str4 = QString::number(strTime.mid(0,2).toInt()).rightJustified(2,'0');
|
||||
QString str5 = QString::number(strTime.mid(2,2).toInt()).rightJustified(2,'0');
|
||||
QString str6 = QString::number(strTime.mid(4,2).toInt()).rightJustified(2,'0');
|
||||
QString strDateTime = str1 + "-" + str2 + "-" + str3 + " " + str4 + ":" + str5 + ":" + str6;
|
||||
LogInfo::setRunStatusText(tr("ink Warning at: %1").arg(strDateTime));
|
||||
qDebug()<<"ink Warning at:"<<strDateTime;
|
||||
}
|
||||
}
|
||||
|
||||
if(sysPara->para.flagOfInkWarning){
|
||||
if(!sysPara->RFIDPara.needInkCard){
|
||||
// 软件启动后第一次提示的时间
|
||||
QDateTime curDateTime = QDateTime::currentDateTime();
|
||||
QByteArray curDateTimestr = curDateTime.toString("yyyy-MM-dd HH::mm::ss").toUtf8();
|
||||
QFile file("/home/plg/inkRFIDTime.txt");
|
||||
if(!file.open(QIODevice::WriteOnly | QIODevice::Truncate)){
|
||||
qDebug()<<"Open inkRFIDTime Failure.";
|
||||
LogInfo::setRunStatusText("Open inkRFIDTime Failure.");
|
||||
}
|
||||
int ret = file.write(curDateTimestr);
|
||||
if(ret <= 0){
|
||||
qDebug()<<"Write inkRFIDTime Failure.";
|
||||
LogInfo::setRunStatusText("Write inkRFIDTime Failure.");
|
||||
}
|
||||
file.close();
|
||||
|
||||
sysPara->RFIDPara.needInkCard = true;
|
||||
sysPara->saveRFIDPara();
|
||||
}
|
||||
warningHandler(CARD_TYPE::INK);
|
||||
// 状态正常但是需要刷卡，说明此时先加的墨水，后面再刷卡
|
||||
if(!(sysPara->status.statWarn & WARN_STATUS_INK_WARN)
|
||||
&& sysPara->RFIDPara.needInkCard){
|
||||
|
||||
sysPara->RFIDPara.addedInk = true;
|
||||
// 放在这里是为了防止在 刷卡&加墨水 流程中，用户没有刷卡就关机了。关机后再开机，仍然需要 刷卡&加墨水 才能继续使用喷码机。
|
||||
if(sysPara->RFIDPara.needInkCard)
|
||||
manager_rfid->requireInkCard();
|
||||
|
||||
|
||||
// 计算刷卡时间间隔
|
||||
|
||||
QDateTime inkWarnDateTime = QDateTime::fromString(QString("20%1%2").
|
||||
arg(sysPara->para.inkWarnDate, 6, 10, QChar('0')).
|
||||
arg(sysPara->para.inkWarnTime, 6, 10, QChar('0')), "yyyyMMddhhmmss");
|
||||
|
||||
if (!inkWarnDateTime.isValid()) {
|
||||
// 数据异常时，重置为当前时间并持久化
|
||||
QDateTime now = QDateTime::currentDateTime();
|
||||
QString s = now.toString("yyMMddhhmmss");
|
||||
sysPara->para.inkWarnDate = s.mid(0,6).toInt();
|
||||
sysPara->para.inkWarnTime = s.mid(6,6).toInt();
|
||||
sysPara->saveParaToFile();
|
||||
inkWarnDateTime = now;
|
||||
}
|
||||
|
||||
// 墨水卡未刷，或者没有加墨水，每隔一个小时提示一次。
|
||||
if((!sysPara->RFIDPara.addedInk || sysPara->RFIDPara.needInkCard) && sysPara->RFIDPara.inInkAndRFIDProgress != 0) {
|
||||
|
||||
auto differHours = inkWarnDateTime.secsTo(QDateTime::currentDateTime()) / WARNING_INTERVAL_SEC;
|
||||
|
||||
// 如果differHours小于sysPara->status.showInkWarningNumber，说明系统时间被往前修改过。此时调整开始时间，直接进入超时状态。
|
||||
// 我们让用户承担这个风险，直接进入超时状态，用户需要刷卡才能继续使用喷码机。
|
||||
if(differHours < sysPara->status.showInkWarningNumber) {
|
||||
auto now = QDateTime::currentDateTime();
|
||||
auto newWarnDateTime = now.addSecs(-(MAX_WARNING_TIME_HOUR + 1) * 3600); // 直接进入超时状态，设置为当前时间的前49小时
|
||||
auto str = newWarnDateTime.toString("yyMMddhhmmss");
|
||||
sysPara->para.inkWarnDate = str.mid(0,6).toInt();
|
||||
sysPara->para.inkWarnTime = str.mid(6,6).toInt();
|
||||
|
||||
LogInfo::setRunStatusText("Detected system time rollback; forcing ink warn timeout.");
|
||||
differHours = newWarnDateTime.secsTo(now) / WARNING_INTERVAL_SEC;
|
||||
sysPara->status.showInkWarningNumber = differHours - 1;
|
||||
sysPara->saveParaToFile();
|
||||
sysPara->saveRFIDPara();
|
||||
}
|
||||
|
||||
// if(differHours >= sysPara->status.showInkWarningNumber) {
|
||||
if(differHours > sysPara->status.showInkWarningNumber) {
|
||||
|
||||
// 理论上differHours只会比 sysPara->status.showInkWarningNumber 大 1， 如果大于1，说明系统时间被被往后修改过或者关过机。
|
||||
|
||||
if(differHours > MAX_WARNING_TIME_HOUR)
|
||||
slt_showMsg(tr("墨水液位报警超过%1小时,机器无法正常打印,请先添加原厂墨水再刷墨水卡,以恢复喷码机的正常工作!").arg(MAX_WARNING_TIME_HOUR));
|
||||
else
|
||||
slt_showMsg(tr("请刷墨水卡,请使用原厂墨水耗材,否则机器将在%1小时后禁止使用!").arg(MAX_WARNING_TIME_HOUR - differHours));
|
||||
|
||||
sysPara->status.showInkWarningNumber = differHours;
|
||||
sysPara->saveRFIDPara();
|
||||
}
|
||||
|
||||
// 进入超时状态，禁用喷码机
|
||||
if(differHours > MAX_WARNING_TIME_HOUR) {
|
||||
sysPara->RFIDPara.inkCardTimeOut = true;
|
||||
sysPara->saveRFIDPara();
|
||||
}
|
||||
}
|
||||
|
||||
// 如果用户已经刷了墨水卡，并且加了墨水，则清除 刷卡&加墨水 流程
|
||||
if(sysPara->RFIDPara.addedInk && !sysPara->RFIDPara.needInkCard && sysPara->RFIDPara.inInkAndRFIDProgress != 0) {
|
||||
sysPara->status.showInkWarningNumber = 0;
|
||||
sysPara->RFIDPara.inkCardTimeOut = false;
|
||||
sysPara->RFIDPara.inInkAndRFIDProgress = 0;
|
||||
sysPara->saveRFIDPara();
|
||||
manager_rfid->requireInkCard(false);
|
||||
|
||||
LogInfo::setRunStatusText("Ink card has been added, and the ink card requirement has been cleared.");
|
||||
|
||||
if(sysPara->status.selfCheckDone && (sysPara->status.reclaimTankstatus == 2 || sysPara->status.reclaimTankstatus == 6)) {
|
||||
m_MainWidget->setReclaimOpenBtnStatus(true);
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
void InkJetPrinter::handleWarnSolvent()
|
||||
{
|
||||
static bool logFlag_solventCard = 1; // 每次启动提示一次即可
|
||||
if(!sysPara->para.flagOfSolventWarning){
|
||||
if(sysPara->status.statWarn & WARN_STATUS_SOLV_WARN)
|
||||
sysPara->status.solventWarningCnt++;
|
||||
if(!sysPara || !manager_rfid)
|
||||
return;
|
||||
|
||||
// 溶剂液位抖动处理
|
||||
if(sysPara->status.statWarn & WARN_STATUS_SOLV_WARN) {
|
||||
sysPara->status.solventWarningCnt = qMax(0, sysPara->status.solventWarningCnt);
|
||||
sysPara->status.solventWarningCnt++; // 累计警报10次就提示
|
||||
}
|
||||
else {
|
||||
sysPara->status.solventWarningCnt = 0;
|
||||
sysPara->status.solventWarningCnt = qMin(0, sysPara->status.solventWarningCnt);
|
||||
--sysPara->status.solventWarningCnt;
|
||||
}
|
||||
|
||||
if(sysPara->status.solventWarningCnt >= DETECT_WARNING_TIME){
|
||||
sysPara->para.flagOfSolventWarning = true;
|
||||
manager_rfid->setSolventCardFirstPrompt(true);
|
||||
// 溶剂被加入后处理
|
||||
if(sysPara->status.solventWarningCnt <= -5 && sysPara->RFIDPara.inSolventAndRFIDProgress) {
|
||||
if(!sysPara->RFIDPara.addedSolvent) {
|
||||
sysPara->RFIDPara.addedSolvent = true;
|
||||
sysPara->saveRFIDPara();
|
||||
|
||||
if(sysPara->RFIDPara.needSolventCard) {
|
||||
slt_showMsg(tr("请及时使用溶剂盒附带的IC卡激活溶剂盒"));
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
// 溶剂盒空，进入 刷卡&加溶剂 流程
|
||||
if(sysPara->status.solventWarningCnt >= DETECT_WARNING_TIME && sysPara->RFIDPara.inSolventAndRFIDProgress == 0) {
|
||||
QDateTime curDateTime = QDateTime::currentDateTime();
|
||||
QString strCurDateTime = curDateTime.toString("yyMMddhhmmss");
|
||||
LogInfo::setRunStatusText("Solvent warning.");
|
||||
qDebug()<<"溶剂液位报警";
|
||||
if(sysPara->para.solventWarnDate == 0){
|
||||
sysPara->para.solventWarnDate = strCurDateTime.mid(0,6).toInt();
|
||||
sysPara->para.solventWarnTime = strCurDateTime.mid(6,6).toInt();
|
||||
}
|
||||
|
||||
warningShow(2, 48);
|
||||
sysPara->RFIDPara.addedSolvent = false;
|
||||
sysPara->RFIDPara.needSolventCard = true;
|
||||
sysPara->status.showSolventWarningNumber = 0;
|
||||
|
||||
sysPara->RFIDPara.inSolventAndRFIDProgress = 1;
|
||||
|
||||
slt_showMsg(tr("请刷溶剂卡,请使用原厂溶剂耗材,否则机器将在%1小时后禁止使用!").arg(MAX_WARNING_TIME_HOUR));
|
||||
|
||||
sysPara->saveParaToFile();
|
||||
}
|
||||
}
|
||||
else{
|
||||
if(logFlag_solventCard){
|
||||
logFlag_solventCard = 0;
|
||||
QString strDate = QString::number(sysPara->para.solventWarnDate);
|
||||
QString strTime = QString::number(sysPara->para.solventWarnTime);
|
||||
QString str1 = QString::number(strDate.mid(0,2).toInt()).rightJustified(2,'0');
|
||||
QString str2 = QString::number(strDate.mid(2,2).toInt()).rightJustified(2,'0');
|
||||
QString str3 = QString::number(strDate.mid(4,2).toInt()).rightJustified(2,'0');
|
||||
QString str4 = QString::number(strTime.mid(0,2).toInt()).rightJustified(2,'0');
|
||||
QString str5 = QString::number(strTime.mid(2,2).toInt()).rightJustified(2,'0');
|
||||
QString str6 = QString::number(strTime.mid(4,2).toInt()).rightJustified(2,'0');
|
||||
QString strDateTime = str1 + "-" + str2 + "-" + str3 + " " + str4 + ":" + str5 + ":" + str6;
|
||||
LogInfo::setRunStatusText(tr("solvent Warning at: %1").arg(strDateTime));
|
||||
qDebug()<<"solvent Warning at:"<<strDateTime;
|
||||
}
|
||||
}
|
||||
|
||||
if(sysPara->para.flagOfSolventWarning){
|
||||
if(!sysPara->RFIDPara.needSolventCard){
|
||||
QDateTime curDateTime = QDateTime::currentDateTime();
|
||||
QByteArray curDateTimestr = curDateTime.toString("yyyy-MM-dd HH::mm::ss").toUtf8();
|
||||
QFile file("/home/plg/solventRFIDTime.txt");
|
||||
if(!file.open(QIODevice::WriteOnly | QIODevice::Truncate)){
|
||||
qDebug()<<"Open solventRFIDTime Failure.";
|
||||
LogInfo::setRunStatusText("Open solventRFIDTime Failure.");
|
||||
}
|
||||
int ret = file.write(curDateTimestr);
|
||||
if(ret <= 0){
|
||||
qDebug()<<"Write solventRFIDTime Failure.";
|
||||
LogInfo::setRunStatusText("Write solventRFIDTime Failure.");
|
||||
}
|
||||
file.close();
|
||||
|
||||
sysPara->RFIDPara.needSolventCard = true;
|
||||
sysPara->saveRFIDPara();
|
||||
}
|
||||
warningHandler(CARD_TYPE::SOLVENT);
|
||||
// 如果溶剂报警，说明此时先加的溶剂，后面再刷卡
|
||||
if(!(sysPara->status.statWarn & WARN_STATUS_SOLV_WARN)
|
||||
&& sysPara->RFIDPara.needSolventCard){
|
||||
|
||||
sysPara->RFIDPara.addedSolvent = true;
|
||||
// 放在这里是为了防止在 刷卡&加溶剂 流程中，用户没有刷卡就关机了。关机后再开机，仍然需要 刷卡&加溶剂 才能继续使用喷码机。
|
||||
if(sysPara->RFIDPara.needSolventCard)
|
||||
manager_rfid->requireSolventCard();
|
||||
|
||||
// 计算刷卡时间间隔
|
||||
|
||||
QDateTime solventWarnDateTime = QDateTime::fromString(QString("20%1%2").
|
||||
arg(sysPara->para.solventWarnDate, 6, 10, QChar('0')).
|
||||
arg(sysPara->para.solventWarnTime, 6, 10, QChar('0')), "yyyyMMddhhmmss");
|
||||
|
||||
if (!solventWarnDateTime.isValid()) {
|
||||
// 数据异常时，重置为当前时间并持久化
|
||||
QDateTime now = QDateTime::currentDateTime();
|
||||
QString s = now.toString("yyMMddhhmmss");
|
||||
sysPara->para.solventWarnDate = s.mid(0,6).toInt();
|
||||
sysPara->para.solventWarnTime = s.mid(6,6).toInt();
|
||||
sysPara->saveParaToFile();
|
||||
solventWarnDateTime = now;
|
||||
}
|
||||
|
||||
// 溶剂卡未刷，或者没有加溶剂，每隔一个小时提示一次。
|
||||
if((!sysPara->RFIDPara.addedSolvent || sysPara->RFIDPara.needSolventCard) && sysPara->RFIDPara.inSolventAndRFIDProgress != 0) {
|
||||
auto differHours = solventWarnDateTime.secsTo(QDateTime::currentDateTime()) / WARNING_INTERVAL_SEC;
|
||||
|
||||
// 如果differHours小于sysPara->status.showSolventWarningNumber，说明系统时间被往前修改过。此时调整开始时间，直接进入超时状态。
|
||||
if(differHours < sysPara->status.showSolventWarningNumber) {
|
||||
auto now = QDateTime::currentDateTime();
|
||||
auto newWarnDateTime = now.addSecs(-(MAX_WARNING_TIME_HOUR + 1) * 3600); // 直接进入超时状态，设置为当前时间的前49小时
|
||||
auto str = newWarnDateTime.toString("yyMMddhhmmss");
|
||||
sysPara->para.solventWarnDate = str.mid(0,6).toInt();
|
||||
sysPara->para.solventWarnTime = str.mid(6,6).toInt();
|
||||
|
||||
LogInfo::setRunStatusText("Detected system time rollback; forcing solvent warn timeout.");
|
||||
differHours = newWarnDateTime.secsTo(now) / WARNING_INTERVAL_SEC;
|
||||
sysPara->status.showSolventWarningNumber = differHours - 1;
|
||||
sysPara->saveParaToFile();
|
||||
}
|
||||
|
||||
if(differHours > sysPara->status.showSolventWarningNumber) {
|
||||
if(differHours > MAX_WARNING_TIME_HOUR)
|
||||
slt_showMsg(tr("溶剂液位报警超过%1小时,机器无法正常打印,请先添加溶剂再刷溶剂卡以恢复喷码机的正常工作!").arg(MAX_WARNING_TIME_HOUR));
|
||||
else
|
||||
slt_showMsg(tr("请刷溶剂卡,请使用原厂溶剂耗材,否则机器将在%1小时后禁止使用!").arg(MAX_WARNING_TIME_HOUR - differHours));
|
||||
|
||||
sysPara->status.showSolventWarningNumber = differHours;
|
||||
sysPara->saveRFIDPara();
|
||||
}
|
||||
|
||||
// 进入超时状态，禁用喷码机
|
||||
if(differHours > MAX_WARNING_TIME_HOUR) {
|
||||
sysPara->RFIDPara.solventCardTimeOut = true;
|
||||
sysPara->saveRFIDPara();
|
||||
}
|
||||
}
|
||||
|
||||
// 如果用户已经刷了溶剂卡，并且加了溶剂，则清除 刷卡&加溶剂 流程
|
||||
if(sysPara->RFIDPara.addedSolvent && !sysPara->RFIDPara.needSolventCard && sysPara->RFIDPara.inSolventAndRFIDProgress != 0) {
|
||||
sysPara->status.showSolventWarningNumber = 0;
|
||||
sysPara->RFIDPara.inSolventAndRFIDProgress = 0;
|
||||
sysPara->RFIDPara.solventCardTimeOut = false;
|
||||
sysPara->saveRFIDPara();
|
||||
manager_rfid->requireSolventCard(false);
|
||||
|
||||
LogInfo::setRunStatusText("Solvent card has been added, and the solvent card requirement has been cleared.");
|
||||
|
||||
if(sysPara->status.selfCheckDone && (sysPara->status.reclaimTankstatus == 2 || sysPara->status.reclaimTankstatus == 6)) {
|
||||
m_MainWidget->setReclaimOpenBtnStatus(true);
|
||||
}
|
||||
}
|
||||
}
|
||||
#endif
|
||||
|
||||
|
||||
@@ -108,6 +108,9 @@ private:
|
||||
void init();
|
||||
void initSerialPorts();
|
||||
void autoControlValvePump();
|
||||
|
||||
void autoControlCycleValve();
|
||||
|
||||
void pressureAdj();
|
||||
void autoControlHeater();
|
||||
void cycleValveRunForSelfCheck();
|
||||
@@ -156,6 +159,9 @@ private:
|
||||
QDateTime solventWarnTime = QDateTime();
|
||||
#endif
|
||||
private slots:
|
||||
|
||||
void resetRFIDStatus();
|
||||
|
||||
void onDlgFileOpen(const QString& filename);
|
||||
|
||||
void restartPrintWhenSwitchedWorkFile(bool isPrinting);
|
||||
|
||||
+16
-8
@@ -47,11 +47,13 @@ MainInstruction::MainInstruction(QWidget *parent) :
|
||||
//30s刷新一次总运行时间
|
||||
connect(RunTimeCtrl::instance(), &RunTimeCtrl::sig_saveRunTime
|
||||
, this, [=]() {
|
||||
if (sysPara)
|
||||
MTimeSetting->updateUI(sysPara->RFIDPara);
|
||||
if (sysPara){
|
||||
RFIDPara_t rfidPara = sysPara->RFIDPara;
|
||||
rfidPara.runtimeMs = RunTimeCtrl::instance()->totalRuntimeMs();
|
||||
MTimeSetting->updateUI(rfidPara);
|
||||
}
|
||||
});
|
||||
|
||||
|
||||
applyStyleSheet();
|
||||
|
||||
// 授权
|
||||
@@ -142,7 +144,7 @@ void MainInstruction::ondialogAuthorizationAccepted(){
|
||||
{
|
||||
#ifdef __RFID_CARD
|
||||
/**********超级密码，除了维护时间的5个参数，其他参数清零*****************/
|
||||
memset(&sysPara->RFIDPara,0,sizeof(sysPara->RFIDPara));
|
||||
sysPara->RFIDPara = RFIDPara_t();
|
||||
RunTimeCtrl::instance()->authorizationAccepted(&sysPara->RFIDPara);
|
||||
sysPara->saveRFIDPara();
|
||||
QMessageBox::warning(0,tr("提示"),tr("RFID卡清零!") );
|
||||
@@ -150,11 +152,15 @@ void MainInstruction::ondialogAuthorizationAccepted(){
|
||||
sysPara->para.flagOfInkWarning = false;
|
||||
sysPara->para.flagOfSolventWarning = false;
|
||||
sysPara->status.needMaintenanceRemind = false;
|
||||
sysPara->RFIDPara.inkCardTimeOut = false;
|
||||
sysPara->RFIDPara.solventCardTimeOut = false;
|
||||
|
||||
// sysPara->RFIDPara.inkCardTimeOut = false;
|
||||
// sysPara->RFIDPara.solventCardTimeOut = false;
|
||||
|
||||
sysPara->RFIDPara.needMaintenance = false;
|
||||
sysPara->RFIDPara.needInkCard = false;
|
||||
sysPara->RFIDPara.needSolventCard = false;
|
||||
|
||||
// sysPara->RFIDPara.needInkCard = false;
|
||||
// sysPara->RFIDPara.needSolventCard = false;
|
||||
|
||||
QDate curDate = QDate::currentDate();
|
||||
int curdate = curDate.toString("yyMMdd").toInt();
|
||||
sysPara->RFIDPara.maintenanceDate = curdate; // 维护日期
|
||||
@@ -166,6 +172,8 @@ void MainInstruction::ondialogAuthorizationAccepted(){
|
||||
sysPara->para.solventWarnTime = 0;
|
||||
sysPara->saveParaToFile();
|
||||
sysPara->saveRFIDPara();
|
||||
|
||||
emit superJmAccepted();
|
||||
#endif
|
||||
}
|
||||
else if( dlgInputAddr->checkSupperJm(authString))
|
||||
|
||||
@@ -36,6 +36,8 @@ signals:
|
||||
void sendButtonClickedSignal(int index);
|
||||
void newFileBtnClick();
|
||||
|
||||
void superJmAccepted();
|
||||
|
||||
private slots:
|
||||
void onGraphicsEditBtnClicked();
|
||||
|
||||
|
||||
+16
-3
@@ -70,7 +70,7 @@ SysPara::SysPara(void):
|
||||
status.flagOfNo67FPGA=false;
|
||||
#ifdef __RFID_CARD
|
||||
if(!loadRFIDPara()){
|
||||
memset(&RFIDPara,0,sizeof(RFIDPara));
|
||||
RFIDPara = RFIDPara_t{};
|
||||
saveRFIDPara();
|
||||
}
|
||||
#endif
|
||||
@@ -1024,7 +1024,7 @@ void SysPara::saveRFIDPara()
|
||||
out << RFIDPara.maintenanceInterval;
|
||||
out << RFIDPara.maintenanceEndDate;
|
||||
out << RFIDPara.needMaintenance;
|
||||
out << RFIDPara.runTime;
|
||||
out << (unsigned int)(RFIDPara.runtimeMs / 1000);
|
||||
out << RFIDPara.maintenanceHours;
|
||||
out << RFIDPara.addedInk;
|
||||
out << RFIDPara.addedSolvent;
|
||||
@@ -1032,6 +1032,7 @@ void SysPara::saveRFIDPara()
|
||||
out << RFIDPara.cardSolvent;
|
||||
out << para.rfidCountDown;
|
||||
out << status.showInkWarningNumber << status.showSolventWarningNumber;
|
||||
out << RFIDPara.inInkAndRFIDProgress << RFIDPara.inSolventAndRFIDProgress << RFIDPara.runtimeMs;
|
||||
|
||||
if(!file.flush()){
|
||||
LogInfo::setRunStatusText("RFID Para save Failed 1");
|
||||
@@ -1057,6 +1058,11 @@ bool SysPara::loadRFIDPara()
|
||||
|
||||
QDataStream in(&file);
|
||||
in.setVersion(QDataStream::Qt_4_6); // Set the version compatible with Qt 4.8.5
|
||||
uint oldRuntimeSec = 0;
|
||||
|
||||
RFIDPara.inInkAndRFIDProgress = 0;
|
||||
RFIDPara.inSolventAndRFIDProgress = 0;
|
||||
RFIDPara.runtimeMs = 0;
|
||||
|
||||
in >> RFIDPara.PrintInkDots;
|
||||
in >> RFIDPara.InkEmptyCnt;
|
||||
@@ -1072,7 +1078,7 @@ bool SysPara::loadRFIDPara()
|
||||
in >> RFIDPara.maintenanceInterval;
|
||||
in >> RFIDPara.maintenanceEndDate;
|
||||
in >> RFIDPara.needMaintenance;
|
||||
in >> RFIDPara.runTime;
|
||||
in >> oldRuntimeSec;
|
||||
in >> RFIDPara.maintenanceHours;
|
||||
in >> RFIDPara.addedInk;
|
||||
in >> RFIDPara.addedSolvent;
|
||||
@@ -1080,6 +1086,13 @@ bool SysPara::loadRFIDPara()
|
||||
in >> RFIDPara.cardSolvent;
|
||||
in >> para.rfidCountDown;
|
||||
in >> status.showInkWarningNumber >> status.showSolventWarningNumber;
|
||||
in >> RFIDPara.inInkAndRFIDProgress >> RFIDPara.inSolventAndRFIDProgress >> RFIDPara.runtimeMs;
|
||||
|
||||
// 兼容获取旧的运行时间，如果新的运行时间为0且旧的运行时间大于0，则使用旧的运行时间
|
||||
// 新时间所占用的8字节空间，在旧实现上也是没有用的，它们总是被写入为0，因此RFIDPara.runtimeMs为 0 ，表示软件刚刚升级，第一次运行，应该使用旧的运行时间
|
||||
if(RFIDPara.runtimeMs == 0){
|
||||
RFIDPara.runtimeMs = oldRuntimeSec * 1000;
|
||||
}
|
||||
|
||||
file.close();
|
||||
return true;
|
||||
|
||||
@@ -804,8 +804,8 @@ typedef struct {
|
||||
bool eleEyeEdgetTriggerExternal;
|
||||
bool synTriggerInner;
|
||||
bool synTriggerExternal;
|
||||
bool flagOfInkWarning; //报错累计次数达标，报警标志设为true
|
||||
bool flagOfSolventWarning; //报错累计次数达标，报警标志设为true
|
||||
bool flagOfInkWarning __attribute_deprecated_msg__("已经由 RFIDPara_t::inInkAndRFIDProgress 替代, 现在已经不使用"); //报错累计次数达标，报警标志设为true
|
||||
bool flagOfSolventWarning __attribute_deprecated_msg__("已经由 RFIDPara_t::inSolventAndRFIDProgress 替代, 现在已经不使用"); //报错累计次数达标，报警标志设为true
|
||||
unsigned short rfidCountDown;
|
||||
unsigned int canvasHeight; // 韩国需求中，要求可以设定打印区域的高度，默认为32。
|
||||
|
||||
@@ -876,31 +876,36 @@ typedef struct
|
||||
qint16 full_row_delay_table[48];
|
||||
qint16 pixel_general_dac_parameter[64];
|
||||
}voltePara_t_No73;
|
||||
|
||||
typedef struct
|
||||
{
|
||||
unsigned int PrintInkDots;
|
||||
unsigned int InkEmptyCnt;
|
||||
unsigned int SOLVEmptyCnt;
|
||||
unsigned int PrintInkDots __attribute_deprecated_msg__("可能是从 VX5 祖传过来的, 但是现在韩国没有用");
|
||||
unsigned int InkEmptyCnt __attribute_deprecated_msg__("可能是从 VX4 祖传过来的, 但是现在韩国没有用, VX5也没用");
|
||||
unsigned int SOLVEmptyCnt __attribute_deprecated_msg__("可能是从 VX4 祖传过来的, 但是现在韩国没有用, VX5也没用");
|
||||
unsigned int InkRFIDCnt;
|
||||
unsigned int SOLVRFIDCnt;
|
||||
unsigned short solventNumber;
|
||||
bool needInkCard;
|
||||
bool needSolventCard;
|
||||
bool inkCardTimeOut;
|
||||
bool solventCardTimeOut;
|
||||
unsigned int maintenanceDate;
|
||||
unsigned int maintenanceInterval;
|
||||
unsigned int maintenanceEndDate;
|
||||
bool needMaintenance;
|
||||
// 运行时间与保养间隔时间 runTime>=maintenanceHours 时提示保养
|
||||
unsigned int runTime; // 单位：秒
|
||||
unsigned int maintenanceHours;
|
||||
unsigned short solventNumber __attribute_deprecated_msg__("可能是从 VX5 祖传过来的, 但是现在韩国没有用");
|
||||
bool needInkCard = false;
|
||||
bool needSolventCard = false;
|
||||
bool inkCardTimeOut = false;
|
||||
bool solventCardTimeOut = false;
|
||||
unsigned int maintenanceDate = 0;
|
||||
unsigned int maintenanceInterval = 0;
|
||||
unsigned int maintenanceEndDate = 0;
|
||||
bool needMaintenance = false;
|
||||
// 运行时间与保养间隔时间 runtimeMs>=maintenanceHours 时提示保养
|
||||
unsigned int unused_runTime __attribute_deprecated_msg__("改由 runtimeMs 维护"); // 单位：秒
|
||||
unsigned int maintenanceHours = 0;
|
||||
// 已经加过墨水或溶剂
|
||||
bool addedInk;
|
||||
bool addedSolvent;
|
||||
bool addedInk = false;
|
||||
bool addedSolvent = false;
|
||||
// 已经刷过墨水或溶剂卡
|
||||
bool cardInk;
|
||||
bool cardSolvent;
|
||||
bool cardInk __attribute_deprecated_msg__("这个字段与 needInkCard 逻辑重复");
|
||||
bool cardSolvent __attribute_deprecated_msg__("这个字段与 needSolventCard 逻辑重复");
|
||||
unsigned int inInkAndRFIDProgress = 0;
|
||||
unsigned int inSolventAndRFIDProgress = 0;
|
||||
qint64 runtimeMs = 0; // 运行时间，单位毫秒 .这个字段占用的是上面俩弃用字段的空间，兼容VX5的序列化数据
|
||||
|
||||
}RFIDPara_t;
|
||||
|
||||
#define MDT 0
|
||||
@@ -1019,6 +1024,7 @@ typedef struct{
|
||||
unsigned short synPulseCntPer1sH:8;
|
||||
unsigned short synPulseCntPer1s:16;
|
||||
*/
|
||||
|
||||
unsigned int ink_dot_num:6; //飞过相检头上的墨点数 0x20
|
||||
unsigned int detect_phase_error:1;
|
||||
unsigned int flight_tm_error:1;
|
||||
@@ -1261,8 +1267,8 @@ typedef struct{
|
||||
bool flagOfNeedSolventCard;
|
||||
bool flagOfKeyBoardType;
|
||||
unsigned char changed;
|
||||
unsigned int inkWarningCnt;
|
||||
unsigned int solventWarningCnt;
|
||||
int inkWarningCnt;
|
||||
int solventWarningCnt;
|
||||
unsigned int showInkWarningNumber;
|
||||
unsigned int showSolventWarningNumber;
|
||||
bool needMaintenanceRemind;
|
||||
|
||||
+132
-113
@@ -1043,12 +1043,12 @@
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="dialogmaintenancetimesetting.cpp" line="42"/>
|
||||
<location filename="dialogmaintenancetimesetting.cpp" line="46"/>
|
||||
<source>警告</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="dialogmaintenancetimesetting.cpp" line="43"/>
|
||||
<location filename="dialogmaintenancetimesetting.cpp" line="47"/>
|
||||
<source>确定要设置今天为新的保养日期吗？</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
@@ -1943,163 +1943,197 @@
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="1029"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1031"/>
|
||||
<source>开始自检,请等待%1秒...</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="1066"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1067"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1068"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1069"/>
|
||||
<location filename="mainwidget.cpp" line="400"/>
|
||||
<source>自检完成!!!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3041"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2995"/>
|
||||
<source>警告</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="104"/>
|
||||
<location filename="InkJetPrinter.cpp" line="3277"/>
|
||||
<location filename="InkJetPrinter.cpp" line="3393"/>
|
||||
<source>提示</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="299"/>
|
||||
<location filename="InkJetPrinter.cpp" line="301"/>
|
||||
<source>保养期还有%1小时到期,请及时保养,否则喷码机容易损坏</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="303"/>
|
||||
<location filename="InkJetPrinter.cpp" line="305"/>
|
||||
<source>保养期已超过%1小时,请及时保养,否则喷码机容易损坏</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="1012"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1014"/>
|
||||
<source>开始自检,请等待60秒...</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2633"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2666"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2692"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2635"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2668"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2694"/>
|
||||
<source>正在准备重启,请等待%1秒......</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3159"/>
|
||||
<source>ink Warning at: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3236"/>
|
||||
<source>solvent Warning at: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="776"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1295"/>
|
||||
<location filename="InkJetPrinter.cpp" line="778"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1297"/>
|
||||
<source>压力泄漏或压力传感器故障!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="779"/>
|
||||
<location filename="InkJetPrinter.cpp" line="781"/>
|
||||
<source>运行中压力泄漏，停齿轮泵!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="799"/>
|
||||
<location filename="InkJetPrinter.cpp" line="881"/>
|
||||
<location filename="InkJetPrinter.cpp" line="801"/>
|
||||
<location filename="InkJetPrinter.cpp" line="883"/>
|
||||
<source>定时开机循环完成，准备关机</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="874"/>
|
||||
<location filename="InkJetPrinter.cpp" line="876"/>
|
||||
<source>waitPowerOffTime: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="882"/>
|
||||
<location filename="InkJetPrinter.cpp" line="884"/>
|
||||
<source>准备关机</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="1110"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1112"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1114"/>
|
||||
<source>缺少墨水,喷码机不能正常工作!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="1354"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1356"/>
|
||||
<location filename="mainwidget.cpp" line="401"/>
|
||||
<source>停止打印，自动关闭高压.</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="1991"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1993"/>
|
||||
<source>flagOfPowerOnMode: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2514"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2515"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2516"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2517"/>
|
||||
<source>电机故障</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2532"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2534"/>
|
||||
<source>回收槽到头</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2586"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2587"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2588"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2589"/>
|
||||
<source>回收槽卡住或者回收槽开关时间设置错误</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2809"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2811"/>
|
||||
<source>压力过高,请检查管路是否堵塞,然后点击故障恢复按钮</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2942"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2896"/>
|
||||
<location filename="InkJetPrinter.cpp" line="3184"/>
|
||||
<location filename="InkJetPrinter.cpp" line="3240"/>
|
||||
<source>请刷墨水卡,请使用原厂墨水耗材,否则机器将在%1小时后禁止使用!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2944"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2898"/>
|
||||
<source>墨水液位报警超过48小时,机器无法正常打印,请先添加原厂墨水再刷墨水卡,以恢复喷码机的正常工作!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2952"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2906"/>
|
||||
<location filename="InkJetPrinter.cpp" line="3311"/>
|
||||
<location filename="InkJetPrinter.cpp" line="3359"/>
|
||||
<source>请刷溶剂卡,请使用原厂溶剂耗材,否则机器将在%1小时后禁止使用!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2954"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2908"/>
|
||||
<source>溶剂液位报警超过48小时,机器无法正常打印,请先添加溶剂再刷溶剂卡以恢复喷码机的正常工作!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2962"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2916"/>
|
||||
<source>保养期还有%1天到期,请及时保养,否则喷码机容易损坏</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2964"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2918"/>
|
||||
<source>保养期已超过%1天,请进行保养以恢复喷码机的正常使用</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3301"/>
|
||||
<location filename="InkJetPrinter.cpp" line="3074"/>
|
||||
<source>刷墨水卡成功, 请及时将该墨水卡对应的墨水添加到机器中</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3077"/>
|
||||
<source>刷墨水卡成功!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3086"/>
|
||||
<source>刷溶剂卡成功, 请及时将该溶剂卡对应的溶剂添加到机器中</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3089"/>
|
||||
<source>刷溶剂卡成功!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3164"/>
|
||||
<source>请及时使用墨水盒附带的IC卡激活墨水盒</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3238"/>
|
||||
<source>墨水液位报警超过%1小时,机器无法正常打印,请先添加原厂墨水再刷墨水卡,以恢复喷码机的正常工作!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3291"/>
|
||||
<source>请及时使用溶剂盒附带的IC卡激活溶剂盒</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3357"/>
|
||||
<source>溶剂液位报警超过%1小时,机器无法正常打印,请先添加溶剂再刷溶剂卡以恢复喷码机的正常工作!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3417"/>
|
||||
<source>File not found: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2993"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2947"/>
|
||||
<source>刷卡倒计时起始时间文件不存在</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
@@ -2882,7 +2916,7 @@
|
||||
</message>
|
||||
<message>
|
||||
<location filename="MainInstruction.ui" line="266"/>
|
||||
<location filename="MainInstruction.cpp" line="179"/>
|
||||
<location filename="MainInstruction.cpp" line="187"/>
|
||||
<source>额外设置</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
@@ -2903,7 +2937,7 @@
|
||||
</message>
|
||||
<message>
|
||||
<location filename="MainInstruction.ui" line="205"/>
|
||||
<location filename="MainInstruction.cpp" line="192"/>
|
||||
<location filename="MainInstruction.cpp" line="200"/>
|
||||
<source>系统授权</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
@@ -2928,28 +2962,28 @@
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="MainInstruction.cpp" line="148"/>
|
||||
<location filename="MainInstruction.cpp" line="150"/>
|
||||
<source>提示</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="MainInstruction.cpp" line="148"/>
|
||||
<location filename="MainInstruction.cpp" line="150"/>
|
||||
<source>RFID卡清零!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="MainInstruction.cpp" line="180"/>
|
||||
<location filename="MainInstruction.cpp" line="191"/>
|
||||
<location filename="MainInstruction.cpp" line="188"/>
|
||||
<location filename="MainInstruction.cpp" line="199"/>
|
||||
<source>取消授权</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="MainInstruction.cpp" line="182"/>
|
||||
<location filename="MainInstruction.cpp" line="190"/>
|
||||
<source>警告</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="MainInstruction.cpp" line="183"/>
|
||||
<location filename="MainInstruction.cpp" line="191"/>
|
||||
<source>密码错误:%1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
@@ -4335,217 +4369,202 @@ p, li { white-space: pre-wrap; }
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="570"/>
|
||||
<source>已经刷过墨水卡,需添加墨水</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="575"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="571"/>
|
||||
<source>不需要刷墨水卡!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="579"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="576"/>
|
||||
<source>确认要刷墨水卡吗?</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="579"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="576"/>
|
||||
<source>确认要刷墨水卡吗? %1 秒后将自动确认</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1113"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1104"/>
|
||||
<source>刷墨水卡成功!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1113"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1104"/>
|
||||
<source>刷墨水卡成功, 请及时将该墨水卡对应的墨水添加到机器中</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1119"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1110"/>
|
||||
<source>刷超级墨水卡失败，请联系厂商。</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="587"/>
|
||||
<source>已经刷过溶剂卡,需添加溶剂</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="592"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="583"/>
|
||||
<source>不需要刷溶剂卡!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="596"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="588"/>
|
||||
<source>确认要刷溶剂卡吗?</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="596"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="588"/>
|
||||
<source>确认要刷溶剂卡吗? %1 秒后将自动确认</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1127"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1118"/>
|
||||
<source>刷溶剂卡成功!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1127"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1118"/>
|
||||
<source>刷溶剂卡成功, 请及时将该溶剂卡对应的溶剂添加到机器中</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1133"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1124"/>
|
||||
<source>刷超级溶剂水卡失败，请联系厂商。</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="605"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="596"/>
|
||||
<source>确认要刷保养卡吗?</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="605"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="596"/>
|
||||
<source>确认要刷保养卡吗? %1 秒后将自动确认</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1157"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1148"/>
|
||||
<source>刷超级保养卡失败，请联系厂商。</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="611"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="602"/>
|
||||
<source>MAC无效卡!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="623"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="614"/>
|
||||
<source>无效卡,这张卡已经在%1时使用过</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="773"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="764"/>
|
||||
<source>设置读写器密码失败!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="791"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="782"/>
|
||||
<source>设置读写器密码成功!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="839"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="830"/>
|
||||
<source>设置读写器原始密码失败!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="902"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="893"/>
|
||||
<source>设置读写器工作模式失败!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="933"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="924"/>
|
||||
<source>设置读写器工作模式成功!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1016"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1007"/>
|
||||
<source>查询读写器地址失败</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="19"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1063"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1054"/>
|
||||
<source>警告</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1234"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1225"/>
|
||||
<source>先加墨水后刷卡：成功</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1249"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1240"/>
|
||||
<source>先加溶剂后刷卡：成功</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1274"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1265"/>
|
||||
<source>13.读卡器故障!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1288"/>
|
||||
<source>请及时使用墨水盒附带的IC卡激活墨水盒</source>
|
||||
<oldsource>请及时刷墨水卡</oldsource>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1293"/>
|
||||
<source>请及时使用溶剂盒附带的IC卡激活溶剂盒</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
</context>
|
||||
<context>
|
||||
<name>RunTimeCtrl</name>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="135"/>
|
||||
<location filename="runtimectrl.cpp" line="136"/>
|
||||
<source>mtDate: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="136"/>
|
||||
<location filename="runtimectrl.cpp" line="137"/>
|
||||
<source>mtInterval: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="137"/>
|
||||
<location filename="runtimectrl.cpp" line="138"/>
|
||||
<source>mtEndDate: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="138"/>
|
||||
<location filename="runtimectrl.cpp" line="139"/>
|
||||
<source>mtFlag: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="139"/>
|
||||
<location filename="runtimectrl.cpp" line="140"/>
|
||||
<source>timeoutDay: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="140"/>
|
||||
<source>runTime: %1</source>
|
||||
<source>timeoutDay: %1</source>
|
||||
<oldsource>runTime: %1</oldsource>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="141"/>
|
||||
<source>runtimeMs: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="142"/>
|
||||
<source>maintenanceHours: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="158"/>
|
||||
<location filename="runtimectrl.cpp" line="159"/>
|
||||
<source>mtDate1: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="159"/>
|
||||
<location filename="runtimectrl.cpp" line="160"/>
|
||||
<source>mtInterval1: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="160"/>
|
||||
<location filename="runtimectrl.cpp" line="161"/>
|
||||
<source>mtEndDate1: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="161"/>
|
||||
<location filename="runtimectrl.cpp" line="162"/>
|
||||
<source>mtFlog1: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
|
||||
@@ -9,6 +9,10 @@ DialogMaintenanceTimeSetting::DialogMaintenanceTimeSetting(QWidget *parent) :
|
||||
{
|
||||
ui->setupUi(this);
|
||||
resetSchedule = false;
|
||||
|
||||
#ifdef BNS_DEBUG
|
||||
ui->spinBoxRuntime->setMinimum(0);
|
||||
#endif
|
||||
}
|
||||
|
||||
DialogMaintenanceTimeSetting::~DialogMaintenanceTimeSetting()
|
||||
@@ -25,7 +29,7 @@ int DialogMaintenanceTimeSetting::getInterval(RFIDPara_t* para)
|
||||
QDate curDate = QDate::currentDate();
|
||||
int curdate = curDate.toString("yyMMdd").toInt();
|
||||
para->maintenanceDate = curdate; // 维护日期
|
||||
para->runTime = 0;
|
||||
para->runtimeMs = 0;
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
@@ -65,7 +69,7 @@ void DialogMaintenanceTimeSetting::updateUI(RFIDPara_t para)
|
||||
int timeoutDay = curDate.daysTo(mtEndDate);
|
||||
ui->label_MaintenanceTime->setText(QString("%1 Days").arg(timeoutDay));
|
||||
ui->spinBox->setValue(para.maintenanceInterval);
|
||||
double h = para.runTime / 60.0 / 60.0;
|
||||
double h = para.runtimeMs / 1000.0 / 60.0 / 60.0;
|
||||
// 保留两位小数
|
||||
ui->label_CurRunTime->setText(QString("%1 Hours").arg(QString::number(h, 'f', 2)));
|
||||
ui->spinBoxRuntime->setValue(para.maintenanceHours);
|
||||
|
||||
@@ -179,7 +179,7 @@ QPushButton {
|
||||
<bool>true</bool>
|
||||
</property>
|
||||
<property name="minimum">
|
||||
<number>3000</number>
|
||||
<number>0</number>
|
||||
</property>
|
||||
<property name="maximum">
|
||||
<number>20000</number>
|
||||
|
||||
+132
-113
@@ -1043,12 +1043,12 @@
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="dialogmaintenancetimesetting.cpp" line="42"/>
|
||||
<location filename="dialogmaintenancetimesetting.cpp" line="46"/>
|
||||
<source>警告</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="dialogmaintenancetimesetting.cpp" line="43"/>
|
||||
<location filename="dialogmaintenancetimesetting.cpp" line="47"/>
|
||||
<source>确定要设置今天为新的保养日期吗？</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
@@ -1943,163 +1943,197 @@
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="1029"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1031"/>
|
||||
<source>开始自检,请等待%1秒...</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="1066"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1067"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1068"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1069"/>
|
||||
<location filename="mainwidget.cpp" line="400"/>
|
||||
<source>自检完成!!!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3041"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2995"/>
|
||||
<source>警告</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="104"/>
|
||||
<location filename="InkJetPrinter.cpp" line="3277"/>
|
||||
<location filename="InkJetPrinter.cpp" line="3393"/>
|
||||
<source>提示</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="299"/>
|
||||
<location filename="InkJetPrinter.cpp" line="301"/>
|
||||
<source>保养期还有%1小时到期,请及时保养,否则喷码机容易损坏</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="303"/>
|
||||
<location filename="InkJetPrinter.cpp" line="305"/>
|
||||
<source>保养期已超过%1小时,请及时保养,否则喷码机容易损坏</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="1012"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1014"/>
|
||||
<source>开始自检,请等待60秒...</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2633"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2666"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2692"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2635"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2668"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2694"/>
|
||||
<source>正在准备重启,请等待%1秒......</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3159"/>
|
||||
<source>ink Warning at: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3236"/>
|
||||
<source>solvent Warning at: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="776"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1295"/>
|
||||
<location filename="InkJetPrinter.cpp" line="778"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1297"/>
|
||||
<source>压力泄漏或压力传感器故障!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="779"/>
|
||||
<location filename="InkJetPrinter.cpp" line="781"/>
|
||||
<source>运行中压力泄漏，停齿轮泵!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="799"/>
|
||||
<location filename="InkJetPrinter.cpp" line="881"/>
|
||||
<location filename="InkJetPrinter.cpp" line="801"/>
|
||||
<location filename="InkJetPrinter.cpp" line="883"/>
|
||||
<source>定时开机循环完成，准备关机</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="874"/>
|
||||
<location filename="InkJetPrinter.cpp" line="876"/>
|
||||
<source>waitPowerOffTime: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="882"/>
|
||||
<location filename="InkJetPrinter.cpp" line="884"/>
|
||||
<source>准备关机</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="1110"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1112"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1114"/>
|
||||
<source>缺少墨水,喷码机不能正常工作!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="1354"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1356"/>
|
||||
<location filename="mainwidget.cpp" line="401"/>
|
||||
<source>停止打印，自动关闭高压.</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="1991"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1993"/>
|
||||
<source>flagOfPowerOnMode: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2514"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2515"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2516"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2517"/>
|
||||
<source>电机故障</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2532"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2534"/>
|
||||
<source>回收槽到头</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2586"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2587"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2588"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2589"/>
|
||||
<source>回收槽卡住或者回收槽开关时间设置错误</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2809"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2811"/>
|
||||
<source>压力过高,请检查管路是否堵塞,然后点击故障恢复按钮</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2942"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2896"/>
|
||||
<location filename="InkJetPrinter.cpp" line="3184"/>
|
||||
<location filename="InkJetPrinter.cpp" line="3240"/>
|
||||
<source>请刷墨水卡,请使用原厂墨水耗材,否则机器将在%1小时后禁止使用!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2944"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2898"/>
|
||||
<source>墨水液位报警超过48小时,机器无法正常打印,请先添加原厂墨水再刷墨水卡,以恢复喷码机的正常工作!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2952"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2906"/>
|
||||
<location filename="InkJetPrinter.cpp" line="3311"/>
|
||||
<location filename="InkJetPrinter.cpp" line="3359"/>
|
||||
<source>请刷溶剂卡,请使用原厂溶剂耗材,否则机器将在%1小时后禁止使用!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2954"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2908"/>
|
||||
<source>溶剂液位报警超过48小时,机器无法正常打印,请先添加溶剂再刷溶剂卡以恢复喷码机的正常工作!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2962"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2916"/>
|
||||
<source>保养期还有%1天到期,请及时保养,否则喷码机容易损坏</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2964"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2918"/>
|
||||
<source>保养期已超过%1天,请进行保养以恢复喷码机的正常使用</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3301"/>
|
||||
<location filename="InkJetPrinter.cpp" line="3074"/>
|
||||
<source>刷墨水卡成功, 请及时将该墨水卡对应的墨水添加到机器中</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3077"/>
|
||||
<source>刷墨水卡成功!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3086"/>
|
||||
<source>刷溶剂卡成功, 请及时将该溶剂卡对应的溶剂添加到机器中</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3089"/>
|
||||
<source>刷溶剂卡成功!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3164"/>
|
||||
<source>请及时使用墨水盒附带的IC卡激活墨水盒</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3238"/>
|
||||
<source>墨水液位报警超过%1小时,机器无法正常打印,请先添加原厂墨水再刷墨水卡,以恢复喷码机的正常工作!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3291"/>
|
||||
<source>请及时使用溶剂盒附带的IC卡激活溶剂盒</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3357"/>
|
||||
<source>溶剂液位报警超过%1小时,机器无法正常打印,请先添加溶剂再刷溶剂卡以恢复喷码机的正常工作!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3417"/>
|
||||
<source>File not found: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2993"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2947"/>
|
||||
<source>刷卡倒计时起始时间文件不存在</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
@@ -2882,7 +2916,7 @@
|
||||
</message>
|
||||
<message>
|
||||
<location filename="MainInstruction.ui" line="266"/>
|
||||
<location filename="MainInstruction.cpp" line="179"/>
|
||||
<location filename="MainInstruction.cpp" line="187"/>
|
||||
<source>额外设置</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
@@ -2903,7 +2937,7 @@
|
||||
</message>
|
||||
<message>
|
||||
<location filename="MainInstruction.ui" line="205"/>
|
||||
<location filename="MainInstruction.cpp" line="192"/>
|
||||
<location filename="MainInstruction.cpp" line="200"/>
|
||||
<source>系统授权</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
@@ -2928,28 +2962,28 @@
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="MainInstruction.cpp" line="148"/>
|
||||
<location filename="MainInstruction.cpp" line="150"/>
|
||||
<source>提示</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="MainInstruction.cpp" line="148"/>
|
||||
<location filename="MainInstruction.cpp" line="150"/>
|
||||
<source>RFID卡清零!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="MainInstruction.cpp" line="180"/>
|
||||
<location filename="MainInstruction.cpp" line="191"/>
|
||||
<location filename="MainInstruction.cpp" line="188"/>
|
||||
<location filename="MainInstruction.cpp" line="199"/>
|
||||
<source>取消授权</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="MainInstruction.cpp" line="182"/>
|
||||
<location filename="MainInstruction.cpp" line="190"/>
|
||||
<source>警告</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="MainInstruction.cpp" line="183"/>
|
||||
<location filename="MainInstruction.cpp" line="191"/>
|
||||
<source>密码错误:%1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
@@ -4335,217 +4369,202 @@ p, li { white-space: pre-wrap; }
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="570"/>
|
||||
<source>已经刷过墨水卡,需添加墨水</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="575"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="571"/>
|
||||
<source>不需要刷墨水卡!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="579"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="576"/>
|
||||
<source>确认要刷墨水卡吗?</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="579"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="576"/>
|
||||
<source>确认要刷墨水卡吗? %1 秒后将自动确认</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1113"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1104"/>
|
||||
<source>刷墨水卡成功!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1113"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1104"/>
|
||||
<source>刷墨水卡成功, 请及时将该墨水卡对应的墨水添加到机器中</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1119"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1110"/>
|
||||
<source>刷超级墨水卡失败，请联系厂商。</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="587"/>
|
||||
<source>已经刷过溶剂卡,需添加溶剂</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="592"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="583"/>
|
||||
<source>不需要刷溶剂卡!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="596"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="588"/>
|
||||
<source>确认要刷溶剂卡吗?</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="596"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="588"/>
|
||||
<source>确认要刷溶剂卡吗? %1 秒后将自动确认</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1127"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1118"/>
|
||||
<source>刷溶剂卡成功!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1127"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1118"/>
|
||||
<source>刷溶剂卡成功, 请及时将该溶剂卡对应的溶剂添加到机器中</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1133"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1124"/>
|
||||
<source>刷超级溶剂水卡失败，请联系厂商。</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="605"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="596"/>
|
||||
<source>确认要刷保养卡吗?</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="605"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="596"/>
|
||||
<source>确认要刷保养卡吗? %1 秒后将自动确认</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1157"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1148"/>
|
||||
<source>刷超级保养卡失败，请联系厂商。</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="611"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="602"/>
|
||||
<source>MAC无效卡!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="623"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="614"/>
|
||||
<source>无效卡,这张卡已经在%1时使用过</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="773"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="764"/>
|
||||
<source>设置读写器密码失败!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="791"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="782"/>
|
||||
<source>设置读写器密码成功!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="839"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="830"/>
|
||||
<source>设置读写器原始密码失败!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="902"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="893"/>
|
||||
<source>设置读写器工作模式失败!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="933"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="924"/>
|
||||
<source>设置读写器工作模式成功!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1016"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1007"/>
|
||||
<source>查询读写器地址失败</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="19"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1063"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1054"/>
|
||||
<source>警告</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1234"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1225"/>
|
||||
<source>先加墨水后刷卡：成功</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1249"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1240"/>
|
||||
<source>先加溶剂后刷卡：成功</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1274"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1265"/>
|
||||
<source>13.读卡器故障!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1288"/>
|
||||
<source>请及时使用墨水盒附带的IC卡激活墨水盒</source>
|
||||
<oldsource>请及时刷墨水卡</oldsource>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1293"/>
|
||||
<source>请及时使用溶剂盒附带的IC卡激活溶剂盒</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
</context>
|
||||
<context>
|
||||
<name>RunTimeCtrl</name>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="135"/>
|
||||
<location filename="runtimectrl.cpp" line="136"/>
|
||||
<source>mtDate: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="136"/>
|
||||
<location filename="runtimectrl.cpp" line="137"/>
|
||||
<source>mtInterval: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="137"/>
|
||||
<location filename="runtimectrl.cpp" line="138"/>
|
||||
<source>mtEndDate: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="138"/>
|
||||
<location filename="runtimectrl.cpp" line="139"/>
|
||||
<source>mtFlag: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="139"/>
|
||||
<location filename="runtimectrl.cpp" line="140"/>
|
||||
<source>timeoutDay: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="140"/>
|
||||
<source>runTime: %1</source>
|
||||
<source>timeoutDay: %1</source>
|
||||
<oldsource>runTime: %1</oldsource>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="141"/>
|
||||
<source>runtimeMs: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="142"/>
|
||||
<source>maintenanceHours: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="158"/>
|
||||
<location filename="runtimectrl.cpp" line="159"/>
|
||||
<source>mtDate1: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="159"/>
|
||||
<location filename="runtimectrl.cpp" line="160"/>
|
||||
<source>mtInterval1: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="160"/>
|
||||
<location filename="runtimectrl.cpp" line="161"/>
|
||||
<source>mtEndDate1: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="161"/>
|
||||
<location filename="runtimectrl.cpp" line="162"/>
|
||||
<source>mtFlog1: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
|
||||
@@ -1043,12 +1043,12 @@
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="dialogmaintenancetimesetting.cpp" line="42"/>
|
||||
<location filename="dialogmaintenancetimesetting.cpp" line="46"/>
|
||||
<source>警告</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="dialogmaintenancetimesetting.cpp" line="43"/>
|
||||
<location filename="dialogmaintenancetimesetting.cpp" line="47"/>
|
||||
<source>确定要设置今天为新的保养日期吗？</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
@@ -1943,163 +1943,197 @@
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="1029"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1031"/>
|
||||
<source>开始自检,请等待%1秒...</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="1066"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1067"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1068"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1069"/>
|
||||
<location filename="mainwidget.cpp" line="400"/>
|
||||
<source>自检完成!!!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3041"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2995"/>
|
||||
<source>警告</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="104"/>
|
||||
<location filename="InkJetPrinter.cpp" line="3277"/>
|
||||
<location filename="InkJetPrinter.cpp" line="3393"/>
|
||||
<source>提示</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="299"/>
|
||||
<location filename="InkJetPrinter.cpp" line="301"/>
|
||||
<source>保养期还有%1小时到期,请及时保养,否则喷码机容易损坏</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="303"/>
|
||||
<location filename="InkJetPrinter.cpp" line="305"/>
|
||||
<source>保养期已超过%1小时,请及时保养,否则喷码机容易损坏</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="1012"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1014"/>
|
||||
<source>开始自检,请等待60秒...</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2633"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2666"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2692"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2635"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2668"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2694"/>
|
||||
<source>正在准备重启,请等待%1秒......</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3159"/>
|
||||
<source>ink Warning at: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3236"/>
|
||||
<source>solvent Warning at: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="776"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1295"/>
|
||||
<location filename="InkJetPrinter.cpp" line="778"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1297"/>
|
||||
<source>压力泄漏或压力传感器故障!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="779"/>
|
||||
<location filename="InkJetPrinter.cpp" line="781"/>
|
||||
<source>运行中压力泄漏，停齿轮泵!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="799"/>
|
||||
<location filename="InkJetPrinter.cpp" line="881"/>
|
||||
<location filename="InkJetPrinter.cpp" line="801"/>
|
||||
<location filename="InkJetPrinter.cpp" line="883"/>
|
||||
<source>定时开机循环完成，准备关机</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="874"/>
|
||||
<location filename="InkJetPrinter.cpp" line="876"/>
|
||||
<source>waitPowerOffTime: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="882"/>
|
||||
<location filename="InkJetPrinter.cpp" line="884"/>
|
||||
<source>准备关机</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="1110"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1112"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1114"/>
|
||||
<source>缺少墨水,喷码机不能正常工作!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="1354"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1356"/>
|
||||
<location filename="mainwidget.cpp" line="401"/>
|
||||
<source>停止打印，自动关闭高压.</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="1991"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1993"/>
|
||||
<source>flagOfPowerOnMode: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2514"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2515"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2516"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2517"/>
|
||||
<source>电机故障</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2532"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2534"/>
|
||||
<source>回收槽到头</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2586"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2587"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2588"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2589"/>
|
||||
<source>回收槽卡住或者回收槽开关时间设置错误</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2809"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2811"/>
|
||||
<source>压力过高,请检查管路是否堵塞,然后点击故障恢复按钮</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2942"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2896"/>
|
||||
<location filename="InkJetPrinter.cpp" line="3184"/>
|
||||
<location filename="InkJetPrinter.cpp" line="3240"/>
|
||||
<source>请刷墨水卡,请使用原厂墨水耗材,否则机器将在%1小时后禁止使用!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2944"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2898"/>
|
||||
<source>墨水液位报警超过48小时,机器无法正常打印,请先添加原厂墨水再刷墨水卡,以恢复喷码机的正常工作!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2952"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2906"/>
|
||||
<location filename="InkJetPrinter.cpp" line="3311"/>
|
||||
<location filename="InkJetPrinter.cpp" line="3359"/>
|
||||
<source>请刷溶剂卡,请使用原厂溶剂耗材,否则机器将在%1小时后禁止使用!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2954"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2908"/>
|
||||
<source>溶剂液位报警超过48小时,机器无法正常打印,请先添加溶剂再刷溶剂卡以恢复喷码机的正常工作!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2962"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2916"/>
|
||||
<source>保养期还有%1天到期,请及时保养,否则喷码机容易损坏</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2964"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2918"/>
|
||||
<source>保养期已超过%1天,请进行保养以恢复喷码机的正常使用</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3301"/>
|
||||
<location filename="InkJetPrinter.cpp" line="3074"/>
|
||||
<source>刷墨水卡成功, 请及时将该墨水卡对应的墨水添加到机器中</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3077"/>
|
||||
<source>刷墨水卡成功!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3086"/>
|
||||
<source>刷溶剂卡成功, 请及时将该溶剂卡对应的溶剂添加到机器中</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3089"/>
|
||||
<source>刷溶剂卡成功!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3164"/>
|
||||
<source>请及时使用墨水盒附带的IC卡激活墨水盒</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3238"/>
|
||||
<source>墨水液位报警超过%1小时,机器无法正常打印,请先添加原厂墨水再刷墨水卡,以恢复喷码机的正常工作!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3291"/>
|
||||
<source>请及时使用溶剂盒附带的IC卡激活溶剂盒</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3357"/>
|
||||
<source>溶剂液位报警超过%1小时,机器无法正常打印,请先添加溶剂再刷溶剂卡以恢复喷码机的正常工作!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3417"/>
|
||||
<source>File not found: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2993"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2947"/>
|
||||
<source>刷卡倒计时起始时间文件不存在</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
@@ -2882,7 +2916,7 @@
|
||||
</message>
|
||||
<message>
|
||||
<location filename="MainInstruction.ui" line="266"/>
|
||||
<location filename="MainInstruction.cpp" line="179"/>
|
||||
<location filename="MainInstruction.cpp" line="187"/>
|
||||
<source>额外设置</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
@@ -2903,7 +2937,7 @@
|
||||
</message>
|
||||
<message>
|
||||
<location filename="MainInstruction.ui" line="205"/>
|
||||
<location filename="MainInstruction.cpp" line="192"/>
|
||||
<location filename="MainInstruction.cpp" line="200"/>
|
||||
<source>系统授权</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
@@ -2928,28 +2962,28 @@
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="MainInstruction.cpp" line="148"/>
|
||||
<location filename="MainInstruction.cpp" line="150"/>
|
||||
<source>提示</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="MainInstruction.cpp" line="148"/>
|
||||
<location filename="MainInstruction.cpp" line="150"/>
|
||||
<source>RFID卡清零!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="MainInstruction.cpp" line="180"/>
|
||||
<location filename="MainInstruction.cpp" line="191"/>
|
||||
<location filename="MainInstruction.cpp" line="188"/>
|
||||
<location filename="MainInstruction.cpp" line="199"/>
|
||||
<source>取消授权</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="MainInstruction.cpp" line="182"/>
|
||||
<location filename="MainInstruction.cpp" line="190"/>
|
||||
<source>警告</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="MainInstruction.cpp" line="183"/>
|
||||
<location filename="MainInstruction.cpp" line="191"/>
|
||||
<source>密码错误:%1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
@@ -4335,217 +4369,202 @@ p, li { white-space: pre-wrap; }
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="570"/>
|
||||
<source>已经刷过墨水卡,需添加墨水</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="575"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="571"/>
|
||||
<source>不需要刷墨水卡!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="579"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="576"/>
|
||||
<source>确认要刷墨水卡吗?</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="579"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="576"/>
|
||||
<source>确认要刷墨水卡吗? %1 秒后将自动确认</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1113"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1104"/>
|
||||
<source>刷墨水卡成功!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1113"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1104"/>
|
||||
<source>刷墨水卡成功, 请及时将该墨水卡对应的墨水添加到机器中</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1119"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1110"/>
|
||||
<source>刷超级墨水卡失败，请联系厂商。</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="587"/>
|
||||
<source>已经刷过溶剂卡,需添加溶剂</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="592"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="583"/>
|
||||
<source>不需要刷溶剂卡!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="596"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="588"/>
|
||||
<source>确认要刷溶剂卡吗?</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="596"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="588"/>
|
||||
<source>确认要刷溶剂卡吗? %1 秒后将自动确认</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1127"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1118"/>
|
||||
<source>刷溶剂卡成功!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1127"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1118"/>
|
||||
<source>刷溶剂卡成功, 请及时将该溶剂卡对应的溶剂添加到机器中</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1133"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1124"/>
|
||||
<source>刷超级溶剂水卡失败，请联系厂商。</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="605"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="596"/>
|
||||
<source>确认要刷保养卡吗?</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="605"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="596"/>
|
||||
<source>确认要刷保养卡吗? %1 秒后将自动确认</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1157"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1148"/>
|
||||
<source>刷超级保养卡失败，请联系厂商。</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="611"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="602"/>
|
||||
<source>MAC无效卡!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="623"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="614"/>
|
||||
<source>无效卡,这张卡已经在%1时使用过</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="773"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="764"/>
|
||||
<source>设置读写器密码失败!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="791"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="782"/>
|
||||
<source>设置读写器密码成功!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="839"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="830"/>
|
||||
<source>设置读写器原始密码失败!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="902"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="893"/>
|
||||
<source>设置读写器工作模式失败!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="933"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="924"/>
|
||||
<source>设置读写器工作模式成功!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1016"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1007"/>
|
||||
<source>查询读写器地址失败</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="19"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1063"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1054"/>
|
||||
<source>警告</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1234"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1225"/>
|
||||
<source>先加墨水后刷卡：成功</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1249"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1240"/>
|
||||
<source>先加溶剂后刷卡：成功</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1274"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1265"/>
|
||||
<source>13.读卡器故障!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1288"/>
|
||||
<source>请及时使用墨水盒附带的IC卡激活墨水盒</source>
|
||||
<oldsource>请及时刷墨水卡</oldsource>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1293"/>
|
||||
<source>请及时使用溶剂盒附带的IC卡激活溶剂盒</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
</context>
|
||||
<context>
|
||||
<name>RunTimeCtrl</name>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="135"/>
|
||||
<location filename="runtimectrl.cpp" line="136"/>
|
||||
<source>mtDate: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="136"/>
|
||||
<location filename="runtimectrl.cpp" line="137"/>
|
||||
<source>mtInterval: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="137"/>
|
||||
<location filename="runtimectrl.cpp" line="138"/>
|
||||
<source>mtEndDate: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="138"/>
|
||||
<location filename="runtimectrl.cpp" line="139"/>
|
||||
<source>mtFlag: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="139"/>
|
||||
<location filename="runtimectrl.cpp" line="140"/>
|
||||
<source>timeoutDay: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="140"/>
|
||||
<source>runTime: %1</source>
|
||||
<source>timeoutDay: %1</source>
|
||||
<oldsource>runTime: %1</oldsource>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="141"/>
|
||||
<source>runtimeMs: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="142"/>
|
||||
<source>maintenanceHours: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="158"/>
|
||||
<location filename="runtimectrl.cpp" line="159"/>
|
||||
<source>mtDate1: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="159"/>
|
||||
<location filename="runtimectrl.cpp" line="160"/>
|
||||
<source>mtInterval1: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="160"/>
|
||||
<location filename="runtimectrl.cpp" line="161"/>
|
||||
<source>mtEndDate1: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="161"/>
|
||||
<location filename="runtimectrl.cpp" line="162"/>
|
||||
<source>mtFlog1: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
|
||||
@@ -1081,11 +1081,6 @@
|
||||
<source>当前行数:%1 冗点数:%2,冗点数过多,请修改您的配置!!</source>
|
||||
<translation type="obsolete">현재 행 수: %1, 중복 점: %2, 중복 점이 너무 많습니다. 설정을 수정하세요!</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="??" line="144824596"/>
|
||||
<source></source>
|
||||
<translation>Warnning</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="DevOp.cpp" line="2646"/>
|
||||
<source>字高太小或是高压包数据未初始化，您当前错误将忽略所有高压错误</source>
|
||||
@@ -1692,12 +1687,12 @@
|
||||
<translation>텍스트 라벨</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="dialogmaintenancetimesetting.cpp" line="42"/>
|
||||
<location filename="dialogmaintenancetimesetting.cpp" line="46"/>
|
||||
<source>警告</source>
|
||||
<translation>경고</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="dialogmaintenancetimesetting.cpp" line="43"/>
|
||||
<location filename="dialogmaintenancetimesetting.cpp" line="47"/>
|
||||
<source>确定要设置今天为新的保养日期吗？</source>
|
||||
<translation>오늘을 새 유지보수 날짜로 설정하시겠습니까?</translation>
|
||||
</message>
|
||||
@@ -2241,13 +2236,13 @@
|
||||
<location filename="scene/DlgBarcodeFormat.cpp" line="37"/>
|
||||
<location filename="scene/DlgBarcodeFormat.cpp" line="38"/>
|
||||
<source>%1点</source>
|
||||
<translation>%1点</translation>
|
||||
<translation>%1도트</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="scene/DlgBarcodeFormat.cpp" line="46"/>
|
||||
<location filename="scene/DlgBarcodeFormat.cpp" line="47"/>
|
||||
<source>点</source>
|
||||
<translation>픽셀</translation>
|
||||
<translation>도트</translation>
|
||||
</message>
|
||||
</context>
|
||||
<context>
|
||||
@@ -3211,18 +3206,18 @@
|
||||
<translation type="vanished">로그 정보</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="799"/>
|
||||
<location filename="InkJetPrinter.cpp" line="881"/>
|
||||
<location filename="InkJetPrinter.cpp" line="801"/>
|
||||
<location filename="InkJetPrinter.cpp" line="883"/>
|
||||
<source>定时开机循环完成，准备关机</source>
|
||||
<translation>타이머 가동 사이클 완료, 시스템 종료 준비 중</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="874"/>
|
||||
<location filename="InkJetPrinter.cpp" line="876"/>
|
||||
<source>waitPowerOffTime: %1</source>
|
||||
<translation>waitPowerOffTime: %1</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="882"/>
|
||||
<location filename="InkJetPrinter.cpp" line="884"/>
|
||||
<source>准备关机</source>
|
||||
<translation>시스템 종료 준비 중</translation>
|
||||
</message>
|
||||
@@ -3235,25 +3230,25 @@
|
||||
<translation type="vanished">FPGA 통신 복구</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="1012"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1014"/>
|
||||
<source>开始自检,请等待60秒...</source>
|
||||
<translation>자체 진단 시작 60초 대기</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="1029"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1031"/>
|
||||
<source>开始自检,请等待%1秒...</source>
|
||||
<translation>자체 진단 시작 %1초 대기</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="1066"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1067"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1068"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1069"/>
|
||||
<location filename="mainwidget.cpp" line="400"/>
|
||||
<source>自检完成!!!</source>
|
||||
<translation>자체 진단 완료!!!</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="1110"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1112"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1114"/>
|
||||
<source>缺少墨水,喷码机不能正常工作!</source>
|
||||
<translation>잉크 부족으로 작동 불가!</translation>
|
||||
</message>
|
||||
@@ -3286,7 +3281,7 @@
|
||||
<translation type="vanished">압력 변동이 설정값 5 초과</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="1354"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1356"/>
|
||||
<location filename="mainwidget.cpp" line="401"/>
|
||||
<source>停止打印，自动关闭高压.</source>
|
||||
<translation>인쇄 중지, 고전압 자동 종료</translation>
|
||||
@@ -3317,7 +3312,7 @@
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="104"/>
|
||||
<location filename="InkJetPrinter.cpp" line="3277"/>
|
||||
<location filename="InkJetPrinter.cpp" line="3393"/>
|
||||
<source>提示</source>
|
||||
<translation>팁</translation>
|
||||
</message>
|
||||
@@ -3382,13 +3377,13 @@
|
||||
<translation type="vanished">13.카드 리더기 고장!</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="776"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1295"/>
|
||||
<location filename="InkJetPrinter.cpp" line="778"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1297"/>
|
||||
<source>压力泄漏或压力传感器故障!</source>
|
||||
<translation>압력 누출 또는 압력 센서 고장</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="779"/>
|
||||
<location filename="InkJetPrinter.cpp" line="781"/>
|
||||
<source>运行中压力泄漏，停齿轮泵!</source>
|
||||
<translation>작동 중 압력 누출이 발생하여 기어 펌프를 정지합니다!</translation>
|
||||
</message>
|
||||
@@ -3409,9 +3404,10 @@
|
||||
<translation type="vanished">솔벤트 TAG을 리드하겠습니까? %1초 후 자동 확인</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3089"/>
|
||||
<source>刷溶剂卡成功!</source>
|
||||
<oldsource>确认要刷卡吗?</oldsource>
|
||||
<translation type="vanished">솔벤트 TAG 리드 성공!</translation>
|
||||
<translation>솔벤트 TAG 리드 성공!</translation>
|
||||
</message>
|
||||
<message>
|
||||
<source>不需要刷墨水卡!</source>
|
||||
@@ -3430,8 +3426,9 @@
|
||||
<translation type="vanished">먼저 잉크을 보충한 후 TAG을 사용하십시오!</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3077"/>
|
||||
<source>刷墨水卡成功!</source>
|
||||
<translation type="vanished">잉크 TAG 리드 성공!</translation>
|
||||
<translation>잉크 TAG 리드 성공!</translation>
|
||||
</message>
|
||||
<message>
|
||||
<source>确认要刷溶剂卡吗?</source>
|
||||
@@ -3475,32 +3472,29 @@
|
||||
<translation type="vanished">재부팅을 준비하는 중입니다. %1 초 동안 기다려 주십시오...</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2962"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2916"/>
|
||||
<source>保养期还有%1天到期,请及时保养,否则喷码机容易损坏</source>
|
||||
<translation>유지보수 주기 만료까지 %1일 남았습니다. 제때 유지보수를 실시하십시오. </translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2964"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2918"/>
|
||||
<source>保养期已超过%1天,请进行保养以恢复喷码机的正常使用</source>
|
||||
<translation>유지보수 주기가 %1일 초과되었습니다. 잉크젯 프린터의 정상 사용을 복구하려면 유지보수를 실시하십시오.</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2942"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2896"/>
|
||||
<location filename="InkJetPrinter.cpp" line="3184"/>
|
||||
<location filename="InkJetPrinter.cpp" line="3240"/>
|
||||
<source>请刷墨水卡,请使用原厂墨水耗材,否则机器将在%1小时后禁止使用!</source>
|
||||
<oldsource>当前正在使用<byte value="xd"/>
|
||||
%1 <byte value="xd"/>
|
||||
确定要新建文件吗?</oldsource>
|
||||
<translation>현재 사용 중인 <byte value="xd"/>
|
||||
%1 <byte value="xd"/>
|
||||
새 파일을 생성하시겠습니까?</translation>
|
||||
<translation>잉크 TAG를 인식해 주세요. 정품 잉크를 사용해 주세요. 그렇지 않을 경우 %1시간 후 사용이 중지됩니다!</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="1991"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1993"/>
|
||||
<source>flagOfPowerOnMode: %1</source>
|
||||
<translation>flagOfPowerOnMode: %1</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2809"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2811"/>
|
||||
<source>压力过高,请检查管路是否堵塞,然后点击故障恢复按钮</source>
|
||||
<translation>압력이 너무 높습니다. 배관이 막혔는지 확인한 후 오류 복구 버튼을 누르십시오.</translation>
|
||||
</message>
|
||||
@@ -3605,22 +3599,54 @@
|
||||
<translation type="vanished">기어 펌프 회전 속도가 너무 높습니다. 즉시 정지하고 공급업체에 연락하십시오.</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2944"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2898"/>
|
||||
<source>墨水液位报警超过48小时,机器无法正常打印,请先添加原厂墨水再刷墨水卡,以恢复喷码机的正常工作!</source>
|
||||
<translation>잉크 레벨 경보가 48시간을 초과했습니다. 장비의 정상 작동을 복구하기 위해 잉크를 추가하고 잉크 TAG을 리드하세요</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2952"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2906"/>
|
||||
<location filename="InkJetPrinter.cpp" line="3311"/>
|
||||
<location filename="InkJetPrinter.cpp" line="3359"/>
|
||||
<source>请刷溶剂卡,请使用原厂溶剂耗材,否则机器将在%1小时后禁止使用!</source>
|
||||
<translation>솔벤트 TAG를 리드하시고 정품 솔벤트를 사용하십시오. 그렇지 않으면 %1시간 후에 장비 사용이 금지됩니다!</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2954"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2908"/>
|
||||
<source>溶剂液位报警超过48小时,机器无法正常打印,请先添加溶剂再刷溶剂卡以恢复喷码机的正常工作!</source>
|
||||
<translation>솔벤트 수위 경보가 48시간을 초과했습니다. 장비의 정상 작동을 복구하기 위해 솔벤트를 추가하고 솔벤트 TAG를 리드하세요</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3301"/>
|
||||
<location filename="InkJetPrinter.cpp" line="3074"/>
|
||||
<source>刷墨水卡成功, 请及时将该墨水卡对应的墨水添加到机器中</source>
|
||||
<translation>잉크 TAG 리드 성공, 해당 잉크 카드에 대응하는 잉크를 장비에 즉시 보충해 주세요</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3086"/>
|
||||
<source>刷溶剂卡成功, 请及时将该溶剂卡对应的溶剂添加到机器中</source>
|
||||
<translation>솔벤트 TAG 리드 성공, 해당 솔벤트 카드에 대응하는 솔벤트를 장비에 즉시 보충해 주세요</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3164"/>
|
||||
<source>请及时使用墨水盒附带的IC卡激活墨水盒</source>
|
||||
<translation>잉크 용기에 동봉된 IC 카드로 잉크 용기를 즉시 활성화해 주세요</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3238"/>
|
||||
<source>墨水液位报警超过%1小时,机器无法正常打印,请先添加原厂墨水再刷墨水卡,以恢复喷码机的正常工作!</source>
|
||||
<translation></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3291"/>
|
||||
<source>请及时使用溶剂盒附带的IC卡激活溶剂盒</source>
|
||||
<translation>솔벤트 용기에 동봉된 IC 카드로 솔벤트 용기를 즉시 활성화해 주세요</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3357"/>
|
||||
<source>溶剂液位报警超过%1小时,机器无法正常打印,请先添加溶剂再刷溶剂卡以恢复喷码机的正常工作!</source>
|
||||
<translation></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3417"/>
|
||||
<source>File not found: %1</source>
|
||||
<translation>File not found: %1</translation>
|
||||
</message>
|
||||
@@ -3629,7 +3655,7 @@
|
||||
<translation type="obsolete">유지보수 주기가 %1일 초과되었습니다. 제때 유지보수를 실시하십시오. 그렇지 않으면 잉크젯 프린터가 손상될 수 있습니다.</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2993"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2947"/>
|
||||
<source>刷卡倒计时起始时间文件不存在</source>
|
||||
<translation>카드 사용 카운트다운 시작 시간 파일이 존재하지 않습니다.</translation>
|
||||
</message>
|
||||
@@ -3814,7 +3840,7 @@
|
||||
<translation type="obsolete">잉크 선 빠른 닫기 완료</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3041"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2995"/>
|
||||
<source>警告</source>
|
||||
<translation>경고</translation>
|
||||
</message>
|
||||
@@ -3823,12 +3849,12 @@
|
||||
<translation type="vanished">유지 보수 카드 사용 확인?</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="299"/>
|
||||
<location filename="InkJetPrinter.cpp" line="301"/>
|
||||
<source>保养期还有%1小时到期,请及时保养,否则喷码机容易损坏</source>
|
||||
<translation>유지 보수 기간 %1시간 남았습니다, 유지 보수 해주세요.</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="303"/>
|
||||
<location filename="InkJetPrinter.cpp" line="305"/>
|
||||
<source>保养期已超过%1小时,请及时保养,否则喷码机容易损坏</source>
|
||||
<translation>유 보수 기간 %1시간 초과, 유지 보수 해주세요.</translation>
|
||||
</message>
|
||||
@@ -3893,21 +3919,19 @@
|
||||
<translation type="vanished">%1/%2/%3</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2633"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2666"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2692"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2635"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2668"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2694"/>
|
||||
<source>正在准备重启,请等待%1秒......</source>
|
||||
<translation>재시작 준비 중, %1초 대기...</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3159"/>
|
||||
<source>ink Warning at: %1</source>
|
||||
<translation>잉크 경보: %1</translation>
|
||||
<translation type="vanished">잉크 경보: %1</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3236"/>
|
||||
<source>solvent Warning at: %1</source>
|
||||
<translation>솔벤트 경보: %1</translation>
|
||||
<translation type="vanished">솔벤트 경보: %1</translation>
|
||||
</message>
|
||||
<message>
|
||||
<source>警告:加热器长时间无法达到预期温度，故障或设置错误！</source>
|
||||
@@ -3938,8 +3962,8 @@
|
||||
<translation type="obsolete">오류!!!!!!!!!!!점도 이상</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2514"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2515"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2516"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2517"/>
|
||||
<source>电机故障</source>
|
||||
<translation>모터 에러</translation>
|
||||
</message>
|
||||
@@ -3948,13 +3972,13 @@
|
||||
<translation type="vanished">모터 에러!!!</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2532"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2534"/>
|
||||
<source>回收槽到头</source>
|
||||
<translation>거터 최대 위치 도달</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2586"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2587"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2588"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2589"/>
|
||||
<source>回收槽卡住或者回收槽开关时间设置错误</source>
|
||||
<translation>거터가 걸렸거나 거터 개폐 시간 설정이 잘못되었습니다.</translation>
|
||||
</message>
|
||||
@@ -4931,7 +4955,7 @@ Char</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="MainInstruction.ui" line="266"/>
|
||||
<location filename="MainInstruction.cpp" line="179"/>
|
||||
<location filename="MainInstruction.cpp" line="187"/>
|
||||
<source>额外设置</source>
|
||||
<translation>추가 설정</translation>
|
||||
</message>
|
||||
@@ -4951,7 +4975,7 @@ Char</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="MainInstruction.ui" line="205"/>
|
||||
<location filename="MainInstruction.cpp" line="192"/>
|
||||
<location filename="MainInstruction.cpp" line="200"/>
|
||||
<source>系统授权</source>
|
||||
<translation>시스템 권한</translation>
|
||||
</message>
|
||||
@@ -4997,28 +5021,28 @@ Char</translation>
|
||||
<translation>RFID 설정</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="MainInstruction.cpp" line="148"/>
|
||||
<location filename="MainInstruction.cpp" line="150"/>
|
||||
<source>提示</source>
|
||||
<translation>팁</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="MainInstruction.cpp" line="148"/>
|
||||
<location filename="MainInstruction.cpp" line="150"/>
|
||||
<source>RFID卡清零!</source>
|
||||
<translation>RFID 카드 초기화!</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="MainInstruction.cpp" line="180"/>
|
||||
<location filename="MainInstruction.cpp" line="191"/>
|
||||
<location filename="MainInstruction.cpp" line="188"/>
|
||||
<location filename="MainInstruction.cpp" line="199"/>
|
||||
<source>取消授权</source>
|
||||
<translation>권한 해제</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="MainInstruction.cpp" line="182"/>
|
||||
<location filename="MainInstruction.cpp" line="190"/>
|
||||
<source>警告</source>
|
||||
<translation>경고</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="MainInstruction.cpp" line="183"/>
|
||||
<location filename="MainInstruction.cpp" line="191"/>
|
||||
<source>密码错误:%1</source>
|
||||
<translation>비밀번호 오류:%1</translation>
|
||||
</message>
|
||||
@@ -9174,12 +9198,11 @@ configuration.</source>
|
||||
<translation>데이터 블록 6에 데이터 쓰기</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="570"/>
|
||||
<source>已经刷过墨水卡,需添加墨水</source>
|
||||
<translation>이미 잉크 TAG을 리드했습니다. 잉크를 추가해야 합니다.</translation>
|
||||
<translation type="vanished">이미 잉크 TAG을 리드했습니다. 잉크를 추가해야 합니다.</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="575"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="571"/>
|
||||
<source>不需要刷墨水卡!</source>
|
||||
<translation>잉크 TAG 리드 필요 없습니다!</translation>
|
||||
</message>
|
||||
@@ -9188,37 +9211,36 @@ configuration.</source>
|
||||
<translation type="vanished">먼저 잉크을 보충한 후 TAG을 사용하십시오!</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="579"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="576"/>
|
||||
<source>确认要刷墨水卡吗?</source>
|
||||
<translation>잉크 TAG을 리드하겠습니까?</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="579"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="576"/>
|
||||
<source>确认要刷墨水卡吗? %1 秒后将自动确认</source>
|
||||
<translation>잉크 TAG을 리드하겠습니까? %1초 후 자동 확인</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1113"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1104"/>
|
||||
<source>刷墨水卡成功!</source>
|
||||
<translation>잉크 TAG 리드 성공!</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1113"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1104"/>
|
||||
<source>刷墨水卡成功, 请及时将该墨水卡对应的墨水添加到机器中</source>
|
||||
<translation>잉크 TAG 리드 성공, 해당 잉크 카드에 대응하는 잉크를 장비에 즉시 보충해 주세요</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1119"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1110"/>
|
||||
<source>刷超级墨水卡失败，请联系厂商。</source>
|
||||
<translation>슈퍼 잉크 TAG 리드 실패, 제조업체에 문의하십시오.</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="587"/>
|
||||
<source>已经刷过溶剂卡,需添加溶剂</source>
|
||||
<translation>이미 솔벤트 TAG을 리드했습니다. 솔벤트를 추가해야 합니다.</translation>
|
||||
<translation type="vanished">이미 솔벤트 TAG을 리드했습니다. 솔벤트를 추가해야 합니다.</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="592"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="583"/>
|
||||
<source>不需要刷溶剂卡!</source>
|
||||
<translation>솔벤트 TAG 리드 필요 없습니다!</translation>
|
||||
</message>
|
||||
@@ -9227,37 +9249,37 @@ configuration.</source>
|
||||
<translation type="vanished">먼저 솔벤트을 보충한 후 TAG을 사용하십시오!</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="596"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="588"/>
|
||||
<source>确认要刷溶剂卡吗?</source>
|
||||
<translation>솔벤트 TAG을 리드하겠습니까?</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="596"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="588"/>
|
||||
<source>确认要刷溶剂卡吗? %1 秒后将自动确认</source>
|
||||
<translation>솔벤트 TAG을 리드하겠습니까? %1초 후 자동 확인</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1127"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1118"/>
|
||||
<source>刷溶剂卡成功!</source>
|
||||
<translation>솔벤트 TAG 리드 성공!</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1127"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1118"/>
|
||||
<source>刷溶剂卡成功, 请及时将该溶剂卡对应的溶剂添加到机器中</source>
|
||||
<translation>솔벤트 TAG 리드 성공, 해당 솔벤트 카드에 대응하는 솔벤트를 장비에 즉시 보충해 주세요</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1133"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1124"/>
|
||||
<source>刷超级溶剂水卡失败，请联系厂商。</source>
|
||||
<translation>슈퍼 솔벤트 TAG 리드 실패, 제조업체에 문의하십시오.</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="605"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="596"/>
|
||||
<source>确认要刷保养卡吗?</source>
|
||||
<translation>유지 보수 카드 사용 확인?</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="605"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="596"/>
|
||||
<source>确认要刷保养卡吗? %1 秒后将自动确认</source>
|
||||
<translation>유지 보수 카드 사용 확인? %1초 후 자동 확인</translation>
|
||||
</message>
|
||||
@@ -9266,84 +9288,82 @@ configuration.</source>
|
||||
<translation type="vanished">유지보수 카드 성공!</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1157"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1148"/>
|
||||
<source>刷超级保养卡失败，请联系厂商。</source>
|
||||
<translation>슈퍼 유지보수 카드 실패, 제조업체에 문의하십시오.</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="611"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="602"/>
|
||||
<source>MAC无效卡!</source>
|
||||
<translation>MAC 무효 카드!</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="623"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="614"/>
|
||||
<source>无效卡,这张卡已经在%1时使用过</source>
|
||||
<translation>무효 카드 %1시 사용됨</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="773"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="764"/>
|
||||
<source>设置读写器密码失败!</source>
|
||||
<translation>리더기 비밀번호 설정 실패!</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="791"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="782"/>
|
||||
<source>设置读写器密码成功!</source>
|
||||
<translation>리더기 비밀번호 설정 성공!</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="839"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="830"/>
|
||||
<source>设置读写器原始密码失败!</source>
|
||||
<translation>리더기 초기 비밀번호 설정 실패!</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="902"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="893"/>
|
||||
<source>设置读写器工作模式失败!</source>
|
||||
<translation>리더기 작동 모드 설정 실패!</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="933"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="924"/>
|
||||
<source>设置读写器工作模式成功!</source>
|
||||
<translation>리더기 작동 모드 설정 성공!</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1016"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1007"/>
|
||||
<source>查询读写器地址失败</source>
|
||||
<translation>리더기 주소 조회 실패</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="19"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1063"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1054"/>
|
||||
<source>警告</source>
|
||||
<translation>경고</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1234"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1225"/>
|
||||
<source>先加墨水后刷卡：成功</source>
|
||||
<translation>먼저 잉크를 추가한 후 카드 사용: 성공</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1249"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1240"/>
|
||||
<source>先加溶剂后刷卡：成功</source>
|
||||
<translation>먼저 솔벤트를 추가한 후 카드 사용: 성공</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1274"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1265"/>
|
||||
<source>13.读卡器故障!</source>
|
||||
<translation>13.카드 리더기 고장!</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1288"/>
|
||||
<source>请及时使用墨水盒附带的IC卡激活墨水盒</source>
|
||||
<translation>잉크 용기에 동봉된 IC 카드로 잉크 용기를 즉시 활성화해 주세요</translation>
|
||||
<translation type="vanished">잉크 용기에 동봉된 IC 카드로 잉크 용기를 즉시 활성화해 주세요</translation>
|
||||
</message>
|
||||
<message>
|
||||
<source>请及时将该墨水卡对应的墨水添加到机器中</source>
|
||||
<translation type="vanished">해당 잉크 카드에 대응하는 잉크를 장비에 즉시 보충해 주세요</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1293"/>
|
||||
<source>请及时使用溶剂盒附带的IC卡激活溶剂盒</source>
|
||||
<translation>솔벤트 용기에 동봉된 IC 카드로 솔벤트 용기를 즉시 활성화해 주세요</translation>
|
||||
<translation type="vanished">솔벤트 용기에 동봉된 IC 카드로 솔벤트 용기를 즉시 활성화해 주세요</translation>
|
||||
</message>
|
||||
<message>
|
||||
<source>请及时将该溶剂卡对应的溶剂添加到机器中</source>
|
||||
@@ -9357,57 +9377,63 @@ configuration.</source>
|
||||
<context>
|
||||
<name>RunTimeCtrl</name>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="135"/>
|
||||
<location filename="runtimectrl.cpp" line="136"/>
|
||||
<source>mtDate: %1</source>
|
||||
<translation>mtDate: %1</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="136"/>
|
||||
<location filename="runtimectrl.cpp" line="137"/>
|
||||
<source>mtInterval: %1</source>
|
||||
<translation>mtInterval: %1</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="137"/>
|
||||
<location filename="runtimectrl.cpp" line="138"/>
|
||||
<source>mtEndDate: %1</source>
|
||||
<translation>mtEndDate: %1</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="138"/>
|
||||
<location filename="runtimectrl.cpp" line="139"/>
|
||||
<source>mtFlag: %1</source>
|
||||
<translation>mtFlag: %1</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="139"/>
|
||||
<location filename="runtimectrl.cpp" line="140"/>
|
||||
<source>timeoutDay: %1</source>
|
||||
<translation>timeoutDay: %1</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="140"/>
|
||||
<source>runTime: %1</source>
|
||||
<source>timeoutDay: %1</source>
|
||||
<oldsource>runTime: %1</oldsource>
|
||||
<translation>runTime: %1</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="141"/>
|
||||
<source>runtimeMs: %1</source>
|
||||
<translation>runtimeMs: %1</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="142"/>
|
||||
<source>maintenanceHours: %1</source>
|
||||
<translation>maintenanceHours: %1</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="158"/>
|
||||
<location filename="runtimectrl.cpp" line="159"/>
|
||||
<source>mtDate1: %1</source>
|
||||
<translation>mtDate1: %1</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="159"/>
|
||||
<location filename="runtimectrl.cpp" line="160"/>
|
||||
<source>mtInterval1: %1</source>
|
||||
<translation>mtInterval1: %1</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="160"/>
|
||||
<location filename="runtimectrl.cpp" line="161"/>
|
||||
<source>mtEndDate1: %1</source>
|
||||
<translation>mtEndDate1: %1</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="161"/>
|
||||
<location filename="runtimectrl.cpp" line="162"/>
|
||||
<source>mtFlog1: %1</source>
|
||||
<translation>mtFlog1: %1</translation>
|
||||
</message>
|
||||
@@ -11901,7 +11927,14 @@ configuration.</source>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="UpdateFPGA.cpp" line="341"/>
|
||||
<source>\n是否重新尝试？</source>
|
||||
<source>操作错误</source>
|
||||
<oldsource>\n是否重新尝试？</oldsource>
|
||||
<translation>\nDo you want to retry?</translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="UpdateFPGA.cpp" line="341"/>
|
||||
<source>
|
||||
是否重新尝试？</source>
|
||||
<translation>\nDo you want to retry?</translation>
|
||||
</message>
|
||||
</context>
|
||||
|
||||
+37
-56
@@ -544,8 +544,8 @@ void RFIDManager::initRFIDMoudle(unsigned int addr, SysPara *sysPara)
|
||||
setICReaderModeFlag = false;
|
||||
//报警定时器一定要在初始化之后启动，不然就崩
|
||||
#ifdef __RFID_CARD
|
||||
if (warningTimer)
|
||||
warningTimer->start(3000);
|
||||
// if (warningTimer)
|
||||
// warningTimer->start(3000);
|
||||
#endif
|
||||
}
|
||||
|
||||
@@ -566,37 +566,28 @@ void RFIDManager::handleCheck(unsigned int addr)
|
||||
|| strRevdata.left(3) == QString("100C"))
|
||||
{
|
||||
if(strRevdata.at(3) == 'A') {
|
||||
if (sysPara->RFIDPara.cardInk) {
|
||||
emit sig_showMsg(tr("已经刷过墨水卡,需添加墨水"));
|
||||
|
||||
if(!m_needInkCard) {
|
||||
emit sig_showMsg(tr("不需要刷墨水卡!"));
|
||||
return;
|
||||
}
|
||||
|
||||
if(!sysPara->RFIDPara.needInkCard){
|
||||
emit sig_showMsg(tr("不需要刷墨水卡!"));
|
||||
}
|
||||
else {
|
||||
auto blockData = strRevdata;
|
||||
cardTouchConfirmAsync(tr("确认要刷墨水卡吗?"), tr("确认要刷墨水卡吗? %1 秒后将自动确认"), [this, blockData]{
|
||||
markInkCard(blockData);
|
||||
});
|
||||
}
|
||||
}
|
||||
else if(strRevdata.at(3) == 'B')
|
||||
{
|
||||
if (sysPara->RFIDPara.cardSolvent) {
|
||||
emit sig_showMsg(tr("已经刷过溶剂卡,需添加溶剂"));
|
||||
if(!m_needSolventCard) {
|
||||
emit sig_showMsg(tr("不需要刷溶剂卡!"));
|
||||
return;
|
||||
}
|
||||
|
||||
if(!sysPara->RFIDPara.needSolventCard){
|
||||
emit sig_showMsg(tr("不需要刷溶剂卡!"));
|
||||
}
|
||||
else {
|
||||
auto blockData = strRevdata;
|
||||
cardTouchConfirmAsync(tr("确认要刷溶剂卡吗?"), tr("确认要刷溶剂卡吗? %1 秒后将自动确认"), [this, blockData](){
|
||||
markSolventCard(blockData);
|
||||
});
|
||||
}
|
||||
|
||||
}
|
||||
else if(strRevdata.at(3) == 'C')
|
||||
@@ -1052,9 +1043,9 @@ void RFIDManager::initTimer()
|
||||
}
|
||||
|
||||
if (warningTimer == nullptr) {
|
||||
warningTimer = new QTimer(this);
|
||||
connect(warningTimer, &QTimer::timeout,
|
||||
this, &RFIDManager::slt_intervalTimerHandle);
|
||||
// warningTimer = new QTimer(this);
|
||||
// connect(warningTimer, &QTimer::timeout,
|
||||
// this, &RFIDManager::slt_intervalTimerHandle);
|
||||
}
|
||||
}
|
||||
|
||||
@@ -1111,9 +1102,9 @@ void RFIDManager::markInkCard(const QString &blockData)
|
||||
auto ret = RFIDmarkCardUsedAsync(0, blockData);
|
||||
if(ret >= 0 || ret == -11){
|
||||
const QString msg = sysPara->RFIDPara.addedInk ? tr("刷墨水卡成功!") : tr("刷墨水卡成功, 请及时将该墨水卡对应的墨水添加到机器中");
|
||||
emit sig_showMsg(msg);
|
||||
sysPara->RFIDPara.cardInk = true;
|
||||
sysPara->saveRFIDPara();
|
||||
m_hasInkCardBeenSwiped = true;
|
||||
m_needInkCard = false;
|
||||
emit sig_inkCardProgressFinished();
|
||||
}
|
||||
else if(ret == -10) {
|
||||
emit sig_showMsg(tr("刷超级墨水卡失败，请联系厂商。"));
|
||||
@@ -1125,9 +1116,9 @@ void RFIDManager::markSolventCard(const QString &blockData)
|
||||
auto ret = RFIDmarkCardUsedAsync(1, blockData);
|
||||
if(ret >= 0 || ret == -11) {
|
||||
const QString msg = sysPara->RFIDPara.addedSolvent ? tr("刷溶剂卡成功!") : tr("刷溶剂卡成功, 请及时将该溶剂卡对应的溶剂添加到机器中");
|
||||
emit sig_showMsg(msg);
|
||||
sysPara->RFIDPara.cardSolvent = true;
|
||||
sysPara->saveRFIDPara();
|
||||
m_hasSolventCardBeenSwiped = true;
|
||||
m_needSolventCard = false;
|
||||
emit sig_solventProgressFinished();
|
||||
}
|
||||
else if(ret == -10) {
|
||||
emit sig_showMsg(tr("刷超级溶剂水卡失败，请联系厂商。"));
|
||||
@@ -1139,8 +1130,6 @@ void RFIDManager::markMaintenanceCard(const QString &blockData)
|
||||
auto ret = RFIDmarkCardUsedAsync(2, blockData);
|
||||
if(ret >= 0 || ret == -11) {//把卡数据清零
|
||||
|
||||
emit sig_maintenanceShow();
|
||||
|
||||
sysPara->RFIDPara.needMaintenance = false;
|
||||
sysPara->status.needMaintenanceRemind = false;
|
||||
|
||||
@@ -1148,10 +1137,12 @@ void RFIDManager::markMaintenanceCard(const QString &blockData)
|
||||
sysPara->RFIDPara.maintenanceDate = curDate.toString("yyMMdd").toInt();
|
||||
QDate mtEndDate = curDate.addMonths(sysPara->RFIDPara.maintenanceInterval);
|
||||
sysPara->RFIDPara.maintenanceEndDate = mtEndDate.toString("yyMMdd").toInt();
|
||||
sysPara->RFIDPara.runTime = 0;
|
||||
sysPara->RFIDPara.runtimeMs = 0;
|
||||
RunTimeCtrl::instance()->updatePara(&sysPara->RFIDPara);
|
||||
sysPara->saveRFIDPara();
|
||||
// emit sig_showMsg(tr("刷保养卡成功!"));
|
||||
|
||||
emit sig_maintenanceShow();
|
||||
}
|
||||
else if(ret == -10) {
|
||||
emit sig_showMsg(tr("刷超级保养卡失败，请联系厂商。"));
|
||||
@@ -1280,34 +1271,6 @@ void RFIDManager::slt_timerHandle()
|
||||
}
|
||||
}
|
||||
|
||||
//static int totalTime = 0;
|
||||
void RFIDManager::slt_intervalTimerHandle()
|
||||
{
|
||||
updateStatus();
|
||||
if(status.addedInk && !status.cardInk && status.firstPromptInkCard){
|
||||
emit sig_showMsg(tr("请及时使用墨水盒附带的IC卡激活墨水盒"));
|
||||
status.firstPromptInkCard = false;
|
||||
}
|
||||
|
||||
if(status.addedSolvent && !status.cardSolvent && status.firstPromptSolventCard){
|
||||
emit sig_showMsg(tr("请及时使用溶剂盒附带的IC卡激活溶剂盒"));
|
||||
status.firstPromptSolventCard = false;
|
||||
}
|
||||
|
||||
//不需要通知先后，成功即可
|
||||
auto res = waitStatus();
|
||||
if (res == 1) {
|
||||
LogInfo::setRunStatusText("Ink progress finished, and the ink card has been used.");
|
||||
emit sig_inkCardProgressFinished();
|
||||
return;
|
||||
}
|
||||
if (res == 2) {
|
||||
LogInfo::setRunStatusText("Solvent progress finished, and the solvent card has been used.");
|
||||
emit sig_solventProgressFinished();
|
||||
return;
|
||||
}
|
||||
}
|
||||
|
||||
int RFIDManager::RFIDQueryWalletAsync()
|
||||
{
|
||||
if (!comForRFID || !comForRFID->isOpen()) {
|
||||
@@ -1426,3 +1389,21 @@ int RFIDManager::RFIDQueryWalletAsync()
|
||||
qDebug() << "Failed to query card balance, logic error";
|
||||
return -1;
|
||||
}
|
||||
|
||||
void RFIDManager::requireInkCard(bool required)
|
||||
{
|
||||
m_needInkCard = required;
|
||||
m_hasInkCardBeenSwiped = false;
|
||||
}
|
||||
|
||||
void RFIDManager::requireSolventCard(bool required)
|
||||
{
|
||||
m_needSolventCard = required;
|
||||
m_hasSolventCardBeenSwiped = false;
|
||||
}
|
||||
|
||||
void RFIDManager::requireMaintenanceCard(bool required)
|
||||
{
|
||||
m_needMaintenanceCard = required;
|
||||
m_hasMaintenanceCardBeenSwiped = false;
|
||||
}
|
||||
|
||||
+74
-1
@@ -67,6 +67,71 @@ public:
|
||||
*/
|
||||
int RFIDQueryWalletAsync();
|
||||
|
||||
/**
|
||||
* @brief 要求刷墨水卡
|
||||
* @param required 默认请求刷卡，如果置 false，则取消请求刷卡
|
||||
*/
|
||||
void requireInkCard(bool required = true);
|
||||
|
||||
/**
|
||||
* @brief 要求刷溶剂卡
|
||||
* @param required 默认请求刷卡，如果置 false，则取消请求刷卡
|
||||
*/
|
||||
void requireSolventCard(bool required = true);
|
||||
|
||||
/**
|
||||
* @brief 要求刷保养卡
|
||||
*/
|
||||
void requireMaintenanceCard(bool required = true);
|
||||
|
||||
/**
|
||||
* @brief 检查是否已经请求刷墨水卡
|
||||
* @return true 已经请求刷墨水卡，false 未请求刷墨水
|
||||
*/
|
||||
bool hasRequiredInkCard() const {
|
||||
return m_needInkCard;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief 检查是否已经请求刷溶剂卡
|
||||
* @return true 已经请求刷溶剂卡，false 未请求刷溶剂
|
||||
*/
|
||||
bool hasRequiredSolventCard() const {
|
||||
return m_needSolventCard;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief 检查是否已经请求刷保养卡
|
||||
* @return true 已经请求刷保养卡，false 未请求刷保养
|
||||
*/
|
||||
bool hasRequiredMaintenanceCard() const {
|
||||
return m_needMaintenanceCard;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief 检查是否已经刷过墨水卡
|
||||
* @return true 已经刷过墨水卡，false 未刷过墨水
|
||||
*/
|
||||
bool hasInkCardBeenSwiped() const {
|
||||
return m_hasInkCardBeenSwiped;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief 检查是否已经刷过溶剂卡
|
||||
* @return true 已经刷过溶剂卡，false 未刷过溶剂
|
||||
*/
|
||||
bool hasSolventCardBeenSwiped() const {
|
||||
return m_hasSolventCardBeenSwiped;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief 检查是否已经刷过保养卡
|
||||
* @return true 已经刷过保养卡，false 未刷过保养
|
||||
*/
|
||||
bool hasMaintenanceCardBeenSwiped() const {
|
||||
return m_hasMaintenanceCardBeenSwiped;
|
||||
}
|
||||
|
||||
private:
|
||||
RFIDManager();
|
||||
|
||||
@@ -93,6 +158,14 @@ private:
|
||||
int queryReadRFID_address(void);
|
||||
int superCardDeduct();
|
||||
|
||||
bool m_needInkCard = false;
|
||||
bool m_needSolventCard = false;
|
||||
bool m_needMaintenanceCard = false;
|
||||
|
||||
bool m_hasInkCardBeenSwiped = false;
|
||||
bool m_hasSolventCardBeenSwiped = false;
|
||||
bool m_hasMaintenanceCardBeenSwiped = false;
|
||||
|
||||
QMutex m_rfidMutex;
|
||||
QByteArray RFIDReadData;
|
||||
QString strRevdata;
|
||||
@@ -143,7 +216,7 @@ private slots:
|
||||
void slt_timerHandle();
|
||||
|
||||
//处理刷卡与溶剂/墨水报警标志
|
||||
void slt_intervalTimerHandle();
|
||||
// void slt_intervalTimerHandle();
|
||||
};
|
||||
|
||||
#endif // RFIDMANAGER_H
|
||||
+28
-27
@@ -8,19 +8,35 @@ RunTimeCtrl::RunTimeCtrl()
|
||||
init();
|
||||
}
|
||||
|
||||
qint64 RunTimeCtrl::updateRuntime()
|
||||
{
|
||||
m_totalRuntimeMs += m_elapsedTimer.restart();
|
||||
return m_totalRuntimeMs;
|
||||
}
|
||||
|
||||
RunTimeCtrl *RunTimeCtrl::instance()
|
||||
{
|
||||
static RunTimeCtrl *ins = nullptr;
|
||||
if (!ins) {
|
||||
ins = new RunTimeCtrl();
|
||||
}
|
||||
|
||||
return ins;
|
||||
}
|
||||
|
||||
RunTimeCtrl::~RunTimeCtrl()
|
||||
{
|
||||
m_runTimer->stop();
|
||||
m_checkTimer->stop();
|
||||
m_alertTimer->stop();
|
||||
delete m_checkTimer;
|
||||
delete m_alertTimer;
|
||||
}
|
||||
|
||||
void RunTimeCtrl::start()
|
||||
{
|
||||
m_elapsedTimer.start();
|
||||
slt_checkRunTime();
|
||||
m_checkTimer->start(1000 * 60 * 5);
|
||||
m_runTimer->start(1000);
|
||||
m_runTimer->start(30 * 1000);
|
||||
}
|
||||
|
||||
void RunTimeCtrl::stop()
|
||||
@@ -39,14 +55,9 @@ void RunTimeCtrl::setAlertInterval(qint64 minutes)
|
||||
}
|
||||
}
|
||||
|
||||
qint64 RunTimeCtrl::getElapsedSeconds() const
|
||||
qint64 RunTimeCtrl::totalRuntimeMs()
|
||||
{
|
||||
return m_elapsedSeconds;
|
||||
}
|
||||
|
||||
qint64 RunTimeCtrl::getTotalSeconds() const
|
||||
{
|
||||
return m_totalSeconds;
|
||||
return updateRuntime();
|
||||
}
|
||||
|
||||
//5min
|
||||
@@ -64,16 +75,6 @@ void RunTimeCtrl::slt_checkRunTime()
|
||||
}
|
||||
}
|
||||
|
||||
void RunTimeCtrl::slt_recodeTime()
|
||||
{
|
||||
m_elapsedSeconds++;
|
||||
if (m_elapsedSeconds % 30 == 0) {
|
||||
m_totalSeconds += 30;
|
||||
m_para.runTime += 30;
|
||||
emit sig_saveRunTime();
|
||||
}
|
||||
}
|
||||
|
||||
void RunTimeCtrl::init()
|
||||
{
|
||||
m_checkTimer = new QTimer(this);
|
||||
@@ -85,14 +86,14 @@ void RunTimeCtrl::init()
|
||||
// 每 m_alertIntervalMinutes 分钟一次消息框提示
|
||||
connect(m_alertTimer, &QTimer::timeout, this, &RunTimeCtrl::sig_alertTimeout);
|
||||
// 每30s，记录一次总时间
|
||||
connect(m_runTimer, &QTimer::timeout, this, &RunTimeCtrl::slt_recodeTime);
|
||||
connect(m_runTimer, &QTimer::timeout, this, &RunTimeCtrl::sig_saveRunTime);
|
||||
}
|
||||
|
||||
bool RunTimeCtrl::checkRunTime()
|
||||
{
|
||||
// 甲方要求提示越来越频繁
|
||||
// 168h 72h 24h
|
||||
int runHours = m_totalSeconds/60.0/60.0;
|
||||
int runHours = int(updateRuntime() / 1000.0 / 60.0 / 60.0);
|
||||
if (runHours + 24 >= m_para.maintenanceHours) {
|
||||
setAlertInterval(15); //15min
|
||||
return true;
|
||||
@@ -102,7 +103,7 @@ bool RunTimeCtrl::checkRunTime()
|
||||
return true;
|
||||
}
|
||||
if (runHours + 168 >= m_para.maintenanceHours) {
|
||||
setAlertInterval(1); //3h
|
||||
setAlertInterval(180); //3h
|
||||
return true;
|
||||
}
|
||||
return false;
|
||||
@@ -124,7 +125,7 @@ void RunTimeCtrl::loadConfig(RFIDPara_t* para)
|
||||
para->maintenanceInterval = 6;
|
||||
QDate mtEndDate = curDate.addMonths(para->maintenanceInterval);
|
||||
para->maintenanceEndDate = mtEndDate.toString("yyMMdd").toInt();
|
||||
para->runTime = 0;
|
||||
para->runtimeMs = 0;
|
||||
para->maintenanceHours = 3000;
|
||||
}
|
||||
// 结束维护的天数maintenanceEndDate = 刷卡日期+维护月份
|
||||
@@ -137,7 +138,7 @@ void RunTimeCtrl::loadConfig(RFIDPara_t* para)
|
||||
LogInfo::setRunStatusText(tr("mtEndDate: %1").arg(para->maintenanceEndDate));
|
||||
LogInfo::setRunStatusText(tr("mtFlag: %1").arg(para->needMaintenance));
|
||||
LogInfo::setRunStatusText(tr("timeoutDay: %1").arg(timeoutDay));
|
||||
LogInfo::setRunStatusText(tr("runTime: %1").arg(para->runTime));
|
||||
LogInfo::setRunStatusText(tr("runtimeMs: %1").arg(para->runtimeMs));
|
||||
LogInfo::setRunStatusText(tr("maintenanceHours: %1").arg(para->maintenanceHours));
|
||||
if(timeoutDay <= 0 && !para->needMaintenance)
|
||||
para->needMaintenance = true;
|
||||
@@ -145,7 +146,7 @@ void RunTimeCtrl::loadConfig(RFIDPara_t* para)
|
||||
emit sig_updateTimeoutDay(timeoutDay);
|
||||
|
||||
m_para = *para;
|
||||
m_totalSeconds = para->runTime;
|
||||
m_totalRuntimeMs = para->runtimeMs;
|
||||
}
|
||||
|
||||
void RunTimeCtrl::updatePara(RFIDPara_t* para)
|
||||
@@ -168,7 +169,7 @@ void RunTimeCtrl::authorizationAccepted(RFIDPara_t* para)
|
||||
para->maintenanceDate = m_para.maintenanceDate;
|
||||
para->maintenanceInterval = m_para.maintenanceInterval;
|
||||
para->maintenanceEndDate = m_para.maintenanceEndDate;
|
||||
para->runTime = m_para.runTime;
|
||||
para->runtimeMs = m_para.runtimeMs;
|
||||
para->maintenanceHours = m_para.maintenanceHours;
|
||||
updatePara(para);
|
||||
}
|
||||
|
||||
+12
-15
@@ -6,6 +6,7 @@
|
||||
#include <QTimer>
|
||||
#include <QSettings>
|
||||
#include "SysPara.h"
|
||||
#include <QElapsedTimer>
|
||||
|
||||
/**
|
||||
当前类用于统计软件运行时间、到期提醒间隔
|
||||
@@ -16,10 +17,7 @@ class RunTimeCtrl : public QObject
|
||||
Q_OBJECT
|
||||
|
||||
public:
|
||||
static RunTimeCtrl* instance() {
|
||||
static RunTimeCtrl ins;
|
||||
return &ins;
|
||||
}
|
||||
static RunTimeCtrl* instance();
|
||||
|
||||
~RunTimeCtrl();
|
||||
|
||||
@@ -32,11 +30,8 @@ public:
|
||||
// 设置提示间隔（单位：分钟，默认5分钟）
|
||||
void setAlertInterval(qint64 minutes);
|
||||
|
||||
// 获取本次运行时间（秒）
|
||||
qint64 getElapsedSeconds() const;
|
||||
|
||||
// 获取已运行时间（秒）
|
||||
qint64 getTotalSeconds() const;
|
||||
// 获取已运行时间（毫秒）
|
||||
qint64 totalRuntimeMs();
|
||||
|
||||
// 初始化加载参数
|
||||
void loadConfig(RFIDPara_t* para);
|
||||
@@ -55,22 +50,24 @@ signals:
|
||||
|
||||
private slots:
|
||||
void slt_checkRunTime();
|
||||
void slt_recodeTime();
|
||||
|
||||
private:
|
||||
RunTimeCtrl();
|
||||
|
||||
qint64 updateRuntime();
|
||||
|
||||
QTimer *m_checkTimer = nullptr; // 检查计时器
|
||||
QTimer *m_alertTimer = nullptr; // 提示计时器
|
||||
QTimer *m_runTimer = nullptr; // 运行计时器，记录运行时间和更新总时间
|
||||
int m_alertIntervalMinutes = 60; // 提示间隔（分钟）
|
||||
bool m_isAlter = false; // 启动提示计时器标志
|
||||
quint64 m_elapsedSeconds = 0; // 本次运行的时间
|
||||
quint64 m_totalSeconds = 0; // 总运行时间 30s更新一次
|
||||
|
||||
// todo 后续一个相关功能建立一个结构体和独立定时器
|
||||
QElapsedTimer m_elapsedTimer; // 记录本次运行时间
|
||||
|
||||
int m_alertIntervalMinutes = 60; // 提示间隔（分钟）
|
||||
|
||||
quint64 m_totalRuntimeMs = 0; // 自上次保养以来的总运行时间 （ms）
|
||||
|
||||
RFIDPara_t m_para;
|
||||
|
||||
int timeoutDay = 0; // 当前日期到维护结束日期的天数
|
||||
|
||||
void init();
|
||||
|
||||
+132
-113
@@ -1043,12 +1043,12 @@
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="dialogmaintenancetimesetting.cpp" line="42"/>
|
||||
<location filename="dialogmaintenancetimesetting.cpp" line="46"/>
|
||||
<source>警告</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="dialogmaintenancetimesetting.cpp" line="43"/>
|
||||
<location filename="dialogmaintenancetimesetting.cpp" line="47"/>
|
||||
<source>确定要设置今天为新的保养日期吗？</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
@@ -1943,163 +1943,197 @@
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="1029"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1031"/>
|
||||
<source>开始自检,请等待%1秒...</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="1066"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1067"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1068"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1069"/>
|
||||
<location filename="mainwidget.cpp" line="400"/>
|
||||
<source>自检完成!!!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3041"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2995"/>
|
||||
<source>警告</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="104"/>
|
||||
<location filename="InkJetPrinter.cpp" line="3277"/>
|
||||
<location filename="InkJetPrinter.cpp" line="3393"/>
|
||||
<source>提示</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="299"/>
|
||||
<location filename="InkJetPrinter.cpp" line="301"/>
|
||||
<source>保养期还有%1小时到期,请及时保养,否则喷码机容易损坏</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="303"/>
|
||||
<location filename="InkJetPrinter.cpp" line="305"/>
|
||||
<source>保养期已超过%1小时,请及时保养,否则喷码机容易损坏</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="1012"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1014"/>
|
||||
<source>开始自检,请等待60秒...</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2633"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2666"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2692"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2635"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2668"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2694"/>
|
||||
<source>正在准备重启,请等待%1秒......</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3159"/>
|
||||
<source>ink Warning at: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3236"/>
|
||||
<source>solvent Warning at: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="776"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1295"/>
|
||||
<location filename="InkJetPrinter.cpp" line="778"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1297"/>
|
||||
<source>压力泄漏或压力传感器故障!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="779"/>
|
||||
<location filename="InkJetPrinter.cpp" line="781"/>
|
||||
<source>运行中压力泄漏，停齿轮泵!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="799"/>
|
||||
<location filename="InkJetPrinter.cpp" line="881"/>
|
||||
<location filename="InkJetPrinter.cpp" line="801"/>
|
||||
<location filename="InkJetPrinter.cpp" line="883"/>
|
||||
<source>定时开机循环完成，准备关机</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="874"/>
|
||||
<location filename="InkJetPrinter.cpp" line="876"/>
|
||||
<source>waitPowerOffTime: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="882"/>
|
||||
<location filename="InkJetPrinter.cpp" line="884"/>
|
||||
<source>准备关机</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="1110"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1112"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1114"/>
|
||||
<source>缺少墨水,喷码机不能正常工作!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="1354"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1356"/>
|
||||
<location filename="mainwidget.cpp" line="401"/>
|
||||
<source>停止打印，自动关闭高压.</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="1991"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1993"/>
|
||||
<source>flagOfPowerOnMode: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2514"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2515"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2516"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2517"/>
|
||||
<source>电机故障</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2532"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2534"/>
|
||||
<source>回收槽到头</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2586"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2587"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2588"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2589"/>
|
||||
<source>回收槽卡住或者回收槽开关时间设置错误</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2809"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2811"/>
|
||||
<source>压力过高,请检查管路是否堵塞,然后点击故障恢复按钮</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2942"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2896"/>
|
||||
<location filename="InkJetPrinter.cpp" line="3184"/>
|
||||
<location filename="InkJetPrinter.cpp" line="3240"/>
|
||||
<source>请刷墨水卡,请使用原厂墨水耗材,否则机器将在%1小时后禁止使用!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2944"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2898"/>
|
||||
<source>墨水液位报警超过48小时,机器无法正常打印,请先添加原厂墨水再刷墨水卡,以恢复喷码机的正常工作!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2952"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2906"/>
|
||||
<location filename="InkJetPrinter.cpp" line="3311"/>
|
||||
<location filename="InkJetPrinter.cpp" line="3359"/>
|
||||
<source>请刷溶剂卡,请使用原厂溶剂耗材,否则机器将在%1小时后禁止使用!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2954"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2908"/>
|
||||
<source>溶剂液位报警超过48小时,机器无法正常打印,请先添加溶剂再刷溶剂卡以恢复喷码机的正常工作!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2962"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2916"/>
|
||||
<source>保养期还有%1天到期,请及时保养,否则喷码机容易损坏</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2964"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2918"/>
|
||||
<source>保养期已超过%1天,请进行保养以恢复喷码机的正常使用</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3301"/>
|
||||
<location filename="InkJetPrinter.cpp" line="3074"/>
|
||||
<source>刷墨水卡成功, 请及时将该墨水卡对应的墨水添加到机器中</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3077"/>
|
||||
<source>刷墨水卡成功!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3086"/>
|
||||
<source>刷溶剂卡成功, 请及时将该溶剂卡对应的溶剂添加到机器中</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3089"/>
|
||||
<source>刷溶剂卡成功!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3164"/>
|
||||
<source>请及时使用墨水盒附带的IC卡激活墨水盒</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3238"/>
|
||||
<source>墨水液位报警超过%1小时,机器无法正常打印,请先添加原厂墨水再刷墨水卡,以恢复喷码机的正常工作!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3291"/>
|
||||
<source>请及时使用溶剂盒附带的IC卡激活溶剂盒</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3357"/>
|
||||
<source>溶剂液位报警超过%1小时,机器无法正常打印,请先添加溶剂再刷溶剂卡以恢复喷码机的正常工作!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3417"/>
|
||||
<source>File not found: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2993"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2947"/>
|
||||
<source>刷卡倒计时起始时间文件不存在</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
@@ -2882,7 +2916,7 @@
|
||||
</message>
|
||||
<message>
|
||||
<location filename="MainInstruction.ui" line="266"/>
|
||||
<location filename="MainInstruction.cpp" line="179"/>
|
||||
<location filename="MainInstruction.cpp" line="187"/>
|
||||
<source>额外设置</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
@@ -2903,7 +2937,7 @@
|
||||
</message>
|
||||
<message>
|
||||
<location filename="MainInstruction.ui" line="205"/>
|
||||
<location filename="MainInstruction.cpp" line="192"/>
|
||||
<location filename="MainInstruction.cpp" line="200"/>
|
||||
<source>系统授权</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
@@ -2928,28 +2962,28 @@
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="MainInstruction.cpp" line="148"/>
|
||||
<location filename="MainInstruction.cpp" line="150"/>
|
||||
<source>提示</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="MainInstruction.cpp" line="148"/>
|
||||
<location filename="MainInstruction.cpp" line="150"/>
|
||||
<source>RFID卡清零!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="MainInstruction.cpp" line="180"/>
|
||||
<location filename="MainInstruction.cpp" line="191"/>
|
||||
<location filename="MainInstruction.cpp" line="188"/>
|
||||
<location filename="MainInstruction.cpp" line="199"/>
|
||||
<source>取消授权</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="MainInstruction.cpp" line="182"/>
|
||||
<location filename="MainInstruction.cpp" line="190"/>
|
||||
<source>警告</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="MainInstruction.cpp" line="183"/>
|
||||
<location filename="MainInstruction.cpp" line="191"/>
|
||||
<source>密码错误:%1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
@@ -4335,217 +4369,202 @@ p, li { white-space: pre-wrap; }
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="570"/>
|
||||
<source>已经刷过墨水卡,需添加墨水</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="575"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="571"/>
|
||||
<source>不需要刷墨水卡!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="579"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="576"/>
|
||||
<source>确认要刷墨水卡吗?</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="579"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="576"/>
|
||||
<source>确认要刷墨水卡吗? %1 秒后将自动确认</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1113"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1104"/>
|
||||
<source>刷墨水卡成功!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1113"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1104"/>
|
||||
<source>刷墨水卡成功, 请及时将该墨水卡对应的墨水添加到机器中</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1119"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1110"/>
|
||||
<source>刷超级墨水卡失败，请联系厂商。</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="587"/>
|
||||
<source>已经刷过溶剂卡,需添加溶剂</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="592"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="583"/>
|
||||
<source>不需要刷溶剂卡!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="596"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="588"/>
|
||||
<source>确认要刷溶剂卡吗?</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="596"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="588"/>
|
||||
<source>确认要刷溶剂卡吗? %1 秒后将自动确认</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1127"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1118"/>
|
||||
<source>刷溶剂卡成功!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1127"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1118"/>
|
||||
<source>刷溶剂卡成功, 请及时将该溶剂卡对应的溶剂添加到机器中</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1133"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1124"/>
|
||||
<source>刷超级溶剂水卡失败，请联系厂商。</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="605"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="596"/>
|
||||
<source>确认要刷保养卡吗?</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="605"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="596"/>
|
||||
<source>确认要刷保养卡吗? %1 秒后将自动确认</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1157"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1148"/>
|
||||
<source>刷超级保养卡失败，请联系厂商。</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="611"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="602"/>
|
||||
<source>MAC无效卡!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="623"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="614"/>
|
||||
<source>无效卡,这张卡已经在%1时使用过</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="773"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="764"/>
|
||||
<source>设置读写器密码失败!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="791"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="782"/>
|
||||
<source>设置读写器密码成功!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="839"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="830"/>
|
||||
<source>设置读写器原始密码失败!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="902"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="893"/>
|
||||
<source>设置读写器工作模式失败!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="933"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="924"/>
|
||||
<source>设置读写器工作模式成功!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1016"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1007"/>
|
||||
<source>查询读写器地址失败</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="19"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1063"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1054"/>
|
||||
<source>警告</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1234"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1225"/>
|
||||
<source>先加墨水后刷卡：成功</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1249"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1240"/>
|
||||
<source>先加溶剂后刷卡：成功</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1274"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1265"/>
|
||||
<source>13.读卡器故障!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1288"/>
|
||||
<source>请及时使用墨水盒附带的IC卡激活墨水盒</source>
|
||||
<oldsource>请及时刷墨水卡</oldsource>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1293"/>
|
||||
<source>请及时使用溶剂盒附带的IC卡激活溶剂盒</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
</context>
|
||||
<context>
|
||||
<name>RunTimeCtrl</name>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="135"/>
|
||||
<location filename="runtimectrl.cpp" line="136"/>
|
||||
<source>mtDate: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="136"/>
|
||||
<location filename="runtimectrl.cpp" line="137"/>
|
||||
<source>mtInterval: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="137"/>
|
||||
<location filename="runtimectrl.cpp" line="138"/>
|
||||
<source>mtEndDate: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="138"/>
|
||||
<location filename="runtimectrl.cpp" line="139"/>
|
||||
<source>mtFlag: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="139"/>
|
||||
<location filename="runtimectrl.cpp" line="140"/>
|
||||
<source>timeoutDay: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="140"/>
|
||||
<source>runTime: %1</source>
|
||||
<source>timeoutDay: %1</source>
|
||||
<oldsource>runTime: %1</oldsource>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="141"/>
|
||||
<source>runtimeMs: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="142"/>
|
||||
<source>maintenanceHours: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="158"/>
|
||||
<location filename="runtimectrl.cpp" line="159"/>
|
||||
<source>mtDate1: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="159"/>
|
||||
<location filename="runtimectrl.cpp" line="160"/>
|
||||
<source>mtInterval1: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="160"/>
|
||||
<location filename="runtimectrl.cpp" line="161"/>
|
||||
<source>mtEndDate1: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="161"/>
|
||||
<location filename="runtimectrl.cpp" line="162"/>
|
||||
<source>mtFlog1: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
|
||||
@@ -1043,12 +1043,12 @@
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="dialogmaintenancetimesetting.cpp" line="42"/>
|
||||
<location filename="dialogmaintenancetimesetting.cpp" line="46"/>
|
||||
<source>警告</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="dialogmaintenancetimesetting.cpp" line="43"/>
|
||||
<location filename="dialogmaintenancetimesetting.cpp" line="47"/>
|
||||
<source>确定要设置今天为新的保养日期吗？</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
@@ -1943,163 +1943,197 @@
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="1029"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1031"/>
|
||||
<source>开始自检,请等待%1秒...</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="1066"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1067"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1068"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1069"/>
|
||||
<location filename="mainwidget.cpp" line="400"/>
|
||||
<source>自检完成!!!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3041"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2995"/>
|
||||
<source>警告</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="104"/>
|
||||
<location filename="InkJetPrinter.cpp" line="3277"/>
|
||||
<location filename="InkJetPrinter.cpp" line="3393"/>
|
||||
<source>提示</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="299"/>
|
||||
<location filename="InkJetPrinter.cpp" line="301"/>
|
||||
<source>保养期还有%1小时到期,请及时保养,否则喷码机容易损坏</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="303"/>
|
||||
<location filename="InkJetPrinter.cpp" line="305"/>
|
||||
<source>保养期已超过%1小时,请及时保养,否则喷码机容易损坏</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="1012"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1014"/>
|
||||
<source>开始自检,请等待60秒...</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2633"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2666"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2692"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2635"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2668"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2694"/>
|
||||
<source>正在准备重启,请等待%1秒......</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3159"/>
|
||||
<source>ink Warning at: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3236"/>
|
||||
<source>solvent Warning at: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="776"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1295"/>
|
||||
<location filename="InkJetPrinter.cpp" line="778"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1297"/>
|
||||
<source>压力泄漏或压力传感器故障!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="779"/>
|
||||
<location filename="InkJetPrinter.cpp" line="781"/>
|
||||
<source>运行中压力泄漏，停齿轮泵!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="799"/>
|
||||
<location filename="InkJetPrinter.cpp" line="881"/>
|
||||
<location filename="InkJetPrinter.cpp" line="801"/>
|
||||
<location filename="InkJetPrinter.cpp" line="883"/>
|
||||
<source>定时开机循环完成，准备关机</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="874"/>
|
||||
<location filename="InkJetPrinter.cpp" line="876"/>
|
||||
<source>waitPowerOffTime: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="882"/>
|
||||
<location filename="InkJetPrinter.cpp" line="884"/>
|
||||
<source>准备关机</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="1110"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1112"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1114"/>
|
||||
<source>缺少墨水,喷码机不能正常工作!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="1354"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1356"/>
|
||||
<location filename="mainwidget.cpp" line="401"/>
|
||||
<source>停止打印，自动关闭高压.</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="1991"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1993"/>
|
||||
<source>flagOfPowerOnMode: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2514"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2515"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2516"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2517"/>
|
||||
<source>电机故障</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2532"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2534"/>
|
||||
<source>回收槽到头</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2586"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2587"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2588"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2589"/>
|
||||
<source>回收槽卡住或者回收槽开关时间设置错误</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2809"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2811"/>
|
||||
<source>压力过高,请检查管路是否堵塞,然后点击故障恢复按钮</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2942"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2896"/>
|
||||
<location filename="InkJetPrinter.cpp" line="3184"/>
|
||||
<location filename="InkJetPrinter.cpp" line="3240"/>
|
||||
<source>请刷墨水卡,请使用原厂墨水耗材,否则机器将在%1小时后禁止使用!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2944"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2898"/>
|
||||
<source>墨水液位报警超过48小时,机器无法正常打印,请先添加原厂墨水再刷墨水卡,以恢复喷码机的正常工作!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2952"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2906"/>
|
||||
<location filename="InkJetPrinter.cpp" line="3311"/>
|
||||
<location filename="InkJetPrinter.cpp" line="3359"/>
|
||||
<source>请刷溶剂卡,请使用原厂溶剂耗材,否则机器将在%1小时后禁止使用!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2954"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2908"/>
|
||||
<source>溶剂液位报警超过48小时,机器无法正常打印,请先添加溶剂再刷溶剂卡以恢复喷码机的正常工作!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2962"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2916"/>
|
||||
<source>保养期还有%1天到期,请及时保养,否则喷码机容易损坏</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2964"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2918"/>
|
||||
<source>保养期已超过%1天,请进行保养以恢复喷码机的正常使用</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3301"/>
|
||||
<location filename="InkJetPrinter.cpp" line="3074"/>
|
||||
<source>刷墨水卡成功, 请及时将该墨水卡对应的墨水添加到机器中</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3077"/>
|
||||
<source>刷墨水卡成功!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3086"/>
|
||||
<source>刷溶剂卡成功, 请及时将该溶剂卡对应的溶剂添加到机器中</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3089"/>
|
||||
<source>刷溶剂卡成功!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3164"/>
|
||||
<source>请及时使用墨水盒附带的IC卡激活墨水盒</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3238"/>
|
||||
<source>墨水液位报警超过%1小时,机器无法正常打印,请先添加原厂墨水再刷墨水卡,以恢复喷码机的正常工作!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3291"/>
|
||||
<source>请及时使用溶剂盒附带的IC卡激活溶剂盒</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3357"/>
|
||||
<source>溶剂液位报警超过%1小时,机器无法正常打印,请先添加溶剂再刷溶剂卡以恢复喷码机的正常工作!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3417"/>
|
||||
<source>File not found: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2993"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2947"/>
|
||||
<source>刷卡倒计时起始时间文件不存在</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
@@ -2882,7 +2916,7 @@
|
||||
</message>
|
||||
<message>
|
||||
<location filename="MainInstruction.ui" line="266"/>
|
||||
<location filename="MainInstruction.cpp" line="179"/>
|
||||
<location filename="MainInstruction.cpp" line="187"/>
|
||||
<source>额外设置</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
@@ -2903,7 +2937,7 @@
|
||||
</message>
|
||||
<message>
|
||||
<location filename="MainInstruction.ui" line="205"/>
|
||||
<location filename="MainInstruction.cpp" line="192"/>
|
||||
<location filename="MainInstruction.cpp" line="200"/>
|
||||
<source>系统授权</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
@@ -2928,28 +2962,28 @@
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="MainInstruction.cpp" line="148"/>
|
||||
<location filename="MainInstruction.cpp" line="150"/>
|
||||
<source>提示</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="MainInstruction.cpp" line="148"/>
|
||||
<location filename="MainInstruction.cpp" line="150"/>
|
||||
<source>RFID卡清零!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="MainInstruction.cpp" line="180"/>
|
||||
<location filename="MainInstruction.cpp" line="191"/>
|
||||
<location filename="MainInstruction.cpp" line="188"/>
|
||||
<location filename="MainInstruction.cpp" line="199"/>
|
||||
<source>取消授权</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="MainInstruction.cpp" line="182"/>
|
||||
<location filename="MainInstruction.cpp" line="190"/>
|
||||
<source>警告</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="MainInstruction.cpp" line="183"/>
|
||||
<location filename="MainInstruction.cpp" line="191"/>
|
||||
<source>密码错误:%1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
@@ -4335,217 +4369,202 @@ p, li { white-space: pre-wrap; }
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="570"/>
|
||||
<source>已经刷过墨水卡,需添加墨水</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="575"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="571"/>
|
||||
<source>不需要刷墨水卡!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="579"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="576"/>
|
||||
<source>确认要刷墨水卡吗?</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="579"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="576"/>
|
||||
<source>确认要刷墨水卡吗? %1 秒后将自动确认</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1113"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1104"/>
|
||||
<source>刷墨水卡成功!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1113"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1104"/>
|
||||
<source>刷墨水卡成功, 请及时将该墨水卡对应的墨水添加到机器中</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1119"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1110"/>
|
||||
<source>刷超级墨水卡失败，请联系厂商。</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="587"/>
|
||||
<source>已经刷过溶剂卡,需添加溶剂</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="592"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="583"/>
|
||||
<source>不需要刷溶剂卡!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="596"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="588"/>
|
||||
<source>确认要刷溶剂卡吗?</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="596"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="588"/>
|
||||
<source>确认要刷溶剂卡吗? %1 秒后将自动确认</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1127"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1118"/>
|
||||
<source>刷溶剂卡成功!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1127"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1118"/>
|
||||
<source>刷溶剂卡成功, 请及时将该溶剂卡对应的溶剂添加到机器中</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1133"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1124"/>
|
||||
<source>刷超级溶剂水卡失败，请联系厂商。</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="605"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="596"/>
|
||||
<source>确认要刷保养卡吗?</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="605"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="596"/>
|
||||
<source>确认要刷保养卡吗? %1 秒后将自动确认</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1157"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1148"/>
|
||||
<source>刷超级保养卡失败，请联系厂商。</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="611"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="602"/>
|
||||
<source>MAC无效卡!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="623"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="614"/>
|
||||
<source>无效卡,这张卡已经在%1时使用过</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="773"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="764"/>
|
||||
<source>设置读写器密码失败!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="791"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="782"/>
|
||||
<source>设置读写器密码成功!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="839"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="830"/>
|
||||
<source>设置读写器原始密码失败!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="902"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="893"/>
|
||||
<source>设置读写器工作模式失败!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="933"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="924"/>
|
||||
<source>设置读写器工作模式成功!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1016"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1007"/>
|
||||
<source>查询读写器地址失败</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="19"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1063"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1054"/>
|
||||
<source>警告</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1234"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1225"/>
|
||||
<source>先加墨水后刷卡：成功</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1249"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1240"/>
|
||||
<source>先加溶剂后刷卡：成功</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1274"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1265"/>
|
||||
<source>13.读卡器故障!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1288"/>
|
||||
<source>请及时使用墨水盒附带的IC卡激活墨水盒</source>
|
||||
<oldsource>请及时刷墨水卡</oldsource>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1293"/>
|
||||
<source>请及时使用溶剂盒附带的IC卡激活溶剂盒</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
</context>
|
||||
<context>
|
||||
<name>RunTimeCtrl</name>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="135"/>
|
||||
<location filename="runtimectrl.cpp" line="136"/>
|
||||
<source>mtDate: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="136"/>
|
||||
<location filename="runtimectrl.cpp" line="137"/>
|
||||
<source>mtInterval: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="137"/>
|
||||
<location filename="runtimectrl.cpp" line="138"/>
|
||||
<source>mtEndDate: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="138"/>
|
||||
<location filename="runtimectrl.cpp" line="139"/>
|
||||
<source>mtFlag: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="139"/>
|
||||
<location filename="runtimectrl.cpp" line="140"/>
|
||||
<source>timeoutDay: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="140"/>
|
||||
<source>runTime: %1</source>
|
||||
<source>timeoutDay: %1</source>
|
||||
<oldsource>runTime: %1</oldsource>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="141"/>
|
||||
<source>runtimeMs: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="142"/>
|
||||
<source>maintenanceHours: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="158"/>
|
||||
<location filename="runtimectrl.cpp" line="159"/>
|
||||
<source>mtDate1: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="159"/>
|
||||
<location filename="runtimectrl.cpp" line="160"/>
|
||||
<source>mtInterval1: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="160"/>
|
||||
<location filename="runtimectrl.cpp" line="161"/>
|
||||
<source>mtEndDate1: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="161"/>
|
||||
<location filename="runtimectrl.cpp" line="162"/>
|
||||
<source>mtFlog1: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
|
||||
@@ -1043,12 +1043,12 @@
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="dialogmaintenancetimesetting.cpp" line="42"/>
|
||||
<location filename="dialogmaintenancetimesetting.cpp" line="46"/>
|
||||
<source>警告</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="dialogmaintenancetimesetting.cpp" line="43"/>
|
||||
<location filename="dialogmaintenancetimesetting.cpp" line="47"/>
|
||||
<source>确定要设置今天为新的保养日期吗？</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
@@ -1943,163 +1943,197 @@
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="1029"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1031"/>
|
||||
<source>开始自检,请等待%1秒...</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="1066"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1067"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1068"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1069"/>
|
||||
<location filename="mainwidget.cpp" line="400"/>
|
||||
<source>自检完成!!!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3041"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2995"/>
|
||||
<source>警告</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="104"/>
|
||||
<location filename="InkJetPrinter.cpp" line="3277"/>
|
||||
<location filename="InkJetPrinter.cpp" line="3393"/>
|
||||
<source>提示</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="299"/>
|
||||
<location filename="InkJetPrinter.cpp" line="301"/>
|
||||
<source>保养期还有%1小时到期,请及时保养,否则喷码机容易损坏</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="303"/>
|
||||
<location filename="InkJetPrinter.cpp" line="305"/>
|
||||
<source>保养期已超过%1小时,请及时保养,否则喷码机容易损坏</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="1012"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1014"/>
|
||||
<source>开始自检,请等待60秒...</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2633"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2666"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2692"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2635"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2668"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2694"/>
|
||||
<source>正在准备重启,请等待%1秒......</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3159"/>
|
||||
<source>ink Warning at: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3236"/>
|
||||
<source>solvent Warning at: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="776"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1295"/>
|
||||
<location filename="InkJetPrinter.cpp" line="778"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1297"/>
|
||||
<source>压力泄漏或压力传感器故障!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="779"/>
|
||||
<location filename="InkJetPrinter.cpp" line="781"/>
|
||||
<source>运行中压力泄漏，停齿轮泵!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="799"/>
|
||||
<location filename="InkJetPrinter.cpp" line="881"/>
|
||||
<location filename="InkJetPrinter.cpp" line="801"/>
|
||||
<location filename="InkJetPrinter.cpp" line="883"/>
|
||||
<source>定时开机循环完成，准备关机</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="874"/>
|
||||
<location filename="InkJetPrinter.cpp" line="876"/>
|
||||
<source>waitPowerOffTime: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="882"/>
|
||||
<location filename="InkJetPrinter.cpp" line="884"/>
|
||||
<source>准备关机</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="1110"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1112"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1114"/>
|
||||
<source>缺少墨水,喷码机不能正常工作!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="1354"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1356"/>
|
||||
<location filename="mainwidget.cpp" line="401"/>
|
||||
<source>停止打印，自动关闭高压.</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="1991"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1993"/>
|
||||
<source>flagOfPowerOnMode: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2514"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2515"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2516"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2517"/>
|
||||
<source>电机故障</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2532"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2534"/>
|
||||
<source>回收槽到头</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2586"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2587"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2588"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2589"/>
|
||||
<source>回收槽卡住或者回收槽开关时间设置错误</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2809"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2811"/>
|
||||
<source>压力过高,请检查管路是否堵塞,然后点击故障恢复按钮</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2942"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2896"/>
|
||||
<location filename="InkJetPrinter.cpp" line="3184"/>
|
||||
<location filename="InkJetPrinter.cpp" line="3240"/>
|
||||
<source>请刷墨水卡,请使用原厂墨水耗材,否则机器将在%1小时后禁止使用!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2944"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2898"/>
|
||||
<source>墨水液位报警超过48小时,机器无法正常打印,请先添加原厂墨水再刷墨水卡,以恢复喷码机的正常工作!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2952"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2906"/>
|
||||
<location filename="InkJetPrinter.cpp" line="3311"/>
|
||||
<location filename="InkJetPrinter.cpp" line="3359"/>
|
||||
<source>请刷溶剂卡,请使用原厂溶剂耗材,否则机器将在%1小时后禁止使用!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2954"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2908"/>
|
||||
<source>溶剂液位报警超过48小时,机器无法正常打印,请先添加溶剂再刷溶剂卡以恢复喷码机的正常工作!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2962"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2916"/>
|
||||
<source>保养期还有%1天到期,请及时保养,否则喷码机容易损坏</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2964"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2918"/>
|
||||
<source>保养期已超过%1天,请进行保养以恢复喷码机的正常使用</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3301"/>
|
||||
<location filename="InkJetPrinter.cpp" line="3074"/>
|
||||
<source>刷墨水卡成功, 请及时将该墨水卡对应的墨水添加到机器中</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3077"/>
|
||||
<source>刷墨水卡成功!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3086"/>
|
||||
<source>刷溶剂卡成功, 请及时将该溶剂卡对应的溶剂添加到机器中</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3089"/>
|
||||
<source>刷溶剂卡成功!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3164"/>
|
||||
<source>请及时使用墨水盒附带的IC卡激活墨水盒</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3238"/>
|
||||
<source>墨水液位报警超过%1小时,机器无法正常打印,请先添加原厂墨水再刷墨水卡,以恢复喷码机的正常工作!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3291"/>
|
||||
<source>请及时使用溶剂盒附带的IC卡激活溶剂盒</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3357"/>
|
||||
<source>溶剂液位报警超过%1小时,机器无法正常打印,请先添加溶剂再刷溶剂卡以恢复喷码机的正常工作!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3417"/>
|
||||
<source>File not found: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2993"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2947"/>
|
||||
<source>刷卡倒计时起始时间文件不存在</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
@@ -2882,7 +2916,7 @@
|
||||
</message>
|
||||
<message>
|
||||
<location filename="MainInstruction.ui" line="266"/>
|
||||
<location filename="MainInstruction.cpp" line="179"/>
|
||||
<location filename="MainInstruction.cpp" line="187"/>
|
||||
<source>额外设置</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
@@ -2903,7 +2937,7 @@
|
||||
</message>
|
||||
<message>
|
||||
<location filename="MainInstruction.ui" line="205"/>
|
||||
<location filename="MainInstruction.cpp" line="192"/>
|
||||
<location filename="MainInstruction.cpp" line="200"/>
|
||||
<source>系统授权</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
@@ -2928,28 +2962,28 @@
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="MainInstruction.cpp" line="148"/>
|
||||
<location filename="MainInstruction.cpp" line="150"/>
|
||||
<source>提示</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="MainInstruction.cpp" line="148"/>
|
||||
<location filename="MainInstruction.cpp" line="150"/>
|
||||
<source>RFID卡清零!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="MainInstruction.cpp" line="180"/>
|
||||
<location filename="MainInstruction.cpp" line="191"/>
|
||||
<location filename="MainInstruction.cpp" line="188"/>
|
||||
<location filename="MainInstruction.cpp" line="199"/>
|
||||
<source>取消授权</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="MainInstruction.cpp" line="182"/>
|
||||
<location filename="MainInstruction.cpp" line="190"/>
|
||||
<source>警告</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="MainInstruction.cpp" line="183"/>
|
||||
<location filename="MainInstruction.cpp" line="191"/>
|
||||
<source>密码错误:%1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
@@ -4335,217 +4369,202 @@ p, li { white-space: pre-wrap; }
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="570"/>
|
||||
<source>已经刷过墨水卡,需添加墨水</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="575"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="571"/>
|
||||
<source>不需要刷墨水卡!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="579"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="576"/>
|
||||
<source>确认要刷墨水卡吗?</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="579"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="576"/>
|
||||
<source>确认要刷墨水卡吗? %1 秒后将自动确认</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1113"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1104"/>
|
||||
<source>刷墨水卡成功!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1113"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1104"/>
|
||||
<source>刷墨水卡成功, 请及时将该墨水卡对应的墨水添加到机器中</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1119"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1110"/>
|
||||
<source>刷超级墨水卡失败，请联系厂商。</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="587"/>
|
||||
<source>已经刷过溶剂卡,需添加溶剂</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="592"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="583"/>
|
||||
<source>不需要刷溶剂卡!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="596"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="588"/>
|
||||
<source>确认要刷溶剂卡吗?</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="596"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="588"/>
|
||||
<source>确认要刷溶剂卡吗? %1 秒后将自动确认</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1127"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1118"/>
|
||||
<source>刷溶剂卡成功!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1127"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1118"/>
|
||||
<source>刷溶剂卡成功, 请及时将该溶剂卡对应的溶剂添加到机器中</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1133"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1124"/>
|
||||
<source>刷超级溶剂水卡失败，请联系厂商。</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="605"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="596"/>
|
||||
<source>确认要刷保养卡吗?</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="605"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="596"/>
|
||||
<source>确认要刷保养卡吗? %1 秒后将自动确认</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1157"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1148"/>
|
||||
<source>刷超级保养卡失败，请联系厂商。</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="611"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="602"/>
|
||||
<source>MAC无效卡!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="623"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="614"/>
|
||||
<source>无效卡,这张卡已经在%1时使用过</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="773"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="764"/>
|
||||
<source>设置读写器密码失败!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="791"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="782"/>
|
||||
<source>设置读写器密码成功!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="839"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="830"/>
|
||||
<source>设置读写器原始密码失败!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="902"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="893"/>
|
||||
<source>设置读写器工作模式失败!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="933"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="924"/>
|
||||
<source>设置读写器工作模式成功!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1016"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1007"/>
|
||||
<source>查询读写器地址失败</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="19"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1063"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1054"/>
|
||||
<source>警告</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1234"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1225"/>
|
||||
<source>先加墨水后刷卡：成功</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1249"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1240"/>
|
||||
<source>先加溶剂后刷卡：成功</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1274"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1265"/>
|
||||
<source>13.读卡器故障!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1288"/>
|
||||
<source>请及时使用墨水盒附带的IC卡激活墨水盒</source>
|
||||
<oldsource>请及时刷墨水卡</oldsource>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1293"/>
|
||||
<source>请及时使用溶剂盒附带的IC卡激活溶剂盒</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
</context>
|
||||
<context>
|
||||
<name>RunTimeCtrl</name>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="135"/>
|
||||
<location filename="runtimectrl.cpp" line="136"/>
|
||||
<source>mtDate: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="136"/>
|
||||
<location filename="runtimectrl.cpp" line="137"/>
|
||||
<source>mtInterval: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="137"/>
|
||||
<location filename="runtimectrl.cpp" line="138"/>
|
||||
<source>mtEndDate: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="138"/>
|
||||
<location filename="runtimectrl.cpp" line="139"/>
|
||||
<source>mtFlag: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="139"/>
|
||||
<location filename="runtimectrl.cpp" line="140"/>
|
||||
<source>timeoutDay: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="140"/>
|
||||
<source>runTime: %1</source>
|
||||
<source>timeoutDay: %1</source>
|
||||
<oldsource>runTime: %1</oldsource>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="141"/>
|
||||
<source>runtimeMs: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="142"/>
|
||||
<source>maintenanceHours: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="158"/>
|
||||
<location filename="runtimectrl.cpp" line="159"/>
|
||||
<source>mtDate1: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="159"/>
|
||||
<location filename="runtimectrl.cpp" line="160"/>
|
||||
<source>mtInterval1: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="160"/>
|
||||
<location filename="runtimectrl.cpp" line="161"/>
|
||||
<source>mtEndDate1: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="161"/>
|
||||
<location filename="runtimectrl.cpp" line="162"/>
|
||||
<source>mtFlog1: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
|
||||
@@ -1043,12 +1043,12 @@
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="dialogmaintenancetimesetting.cpp" line="42"/>
|
||||
<location filename="dialogmaintenancetimesetting.cpp" line="46"/>
|
||||
<source>警告</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="dialogmaintenancetimesetting.cpp" line="43"/>
|
||||
<location filename="dialogmaintenancetimesetting.cpp" line="47"/>
|
||||
<source>确定要设置今天为新的保养日期吗？</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
@@ -1943,163 +1943,197 @@
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="1029"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1031"/>
|
||||
<source>开始自检,请等待%1秒...</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="1066"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1067"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1068"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1069"/>
|
||||
<location filename="mainwidget.cpp" line="400"/>
|
||||
<source>自检完成!!!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3041"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2995"/>
|
||||
<source>警告</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="104"/>
|
||||
<location filename="InkJetPrinter.cpp" line="3277"/>
|
||||
<location filename="InkJetPrinter.cpp" line="3393"/>
|
||||
<source>提示</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="299"/>
|
||||
<location filename="InkJetPrinter.cpp" line="301"/>
|
||||
<source>保养期还有%1小时到期,请及时保养,否则喷码机容易损坏</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="303"/>
|
||||
<location filename="InkJetPrinter.cpp" line="305"/>
|
||||
<source>保养期已超过%1小时,请及时保养,否则喷码机容易损坏</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="1012"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1014"/>
|
||||
<source>开始自检,请等待60秒...</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2633"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2666"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2692"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2635"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2668"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2694"/>
|
||||
<source>正在准备重启,请等待%1秒......</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3159"/>
|
||||
<source>ink Warning at: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3236"/>
|
||||
<source>solvent Warning at: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="776"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1295"/>
|
||||
<location filename="InkJetPrinter.cpp" line="778"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1297"/>
|
||||
<source>压力泄漏或压力传感器故障!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="779"/>
|
||||
<location filename="InkJetPrinter.cpp" line="781"/>
|
||||
<source>运行中压力泄漏，停齿轮泵!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="799"/>
|
||||
<location filename="InkJetPrinter.cpp" line="881"/>
|
||||
<location filename="InkJetPrinter.cpp" line="801"/>
|
||||
<location filename="InkJetPrinter.cpp" line="883"/>
|
||||
<source>定时开机循环完成，准备关机</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="874"/>
|
||||
<location filename="InkJetPrinter.cpp" line="876"/>
|
||||
<source>waitPowerOffTime: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="882"/>
|
||||
<location filename="InkJetPrinter.cpp" line="884"/>
|
||||
<source>准备关机</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="1110"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1112"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1114"/>
|
||||
<source>缺少墨水,喷码机不能正常工作!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="1354"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1356"/>
|
||||
<location filename="mainwidget.cpp" line="401"/>
|
||||
<source>停止打印，自动关闭高压.</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="1991"/>
|
||||
<location filename="InkJetPrinter.cpp" line="1993"/>
|
||||
<source>flagOfPowerOnMode: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2514"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2515"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2516"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2517"/>
|
||||
<source>电机故障</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2532"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2534"/>
|
||||
<source>回收槽到头</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2586"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2587"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2588"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2589"/>
|
||||
<source>回收槽卡住或者回收槽开关时间设置错误</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2809"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2811"/>
|
||||
<source>压力过高,请检查管路是否堵塞,然后点击故障恢复按钮</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2942"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2896"/>
|
||||
<location filename="InkJetPrinter.cpp" line="3184"/>
|
||||
<location filename="InkJetPrinter.cpp" line="3240"/>
|
||||
<source>请刷墨水卡,请使用原厂墨水耗材,否则机器将在%1小时后禁止使用!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2944"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2898"/>
|
||||
<source>墨水液位报警超过48小时,机器无法正常打印,请先添加原厂墨水再刷墨水卡,以恢复喷码机的正常工作!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2952"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2906"/>
|
||||
<location filename="InkJetPrinter.cpp" line="3311"/>
|
||||
<location filename="InkJetPrinter.cpp" line="3359"/>
|
||||
<source>请刷溶剂卡,请使用原厂溶剂耗材,否则机器将在%1小时后禁止使用!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2954"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2908"/>
|
||||
<source>溶剂液位报警超过48小时,机器无法正常打印,请先添加溶剂再刷溶剂卡以恢复喷码机的正常工作!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2962"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2916"/>
|
||||
<source>保养期还有%1天到期,请及时保养,否则喷码机容易损坏</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2964"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2918"/>
|
||||
<source>保养期已超过%1天,请进行保养以恢复喷码机的正常使用</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3301"/>
|
||||
<location filename="InkJetPrinter.cpp" line="3074"/>
|
||||
<source>刷墨水卡成功, 请及时将该墨水卡对应的墨水添加到机器中</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3077"/>
|
||||
<source>刷墨水卡成功!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3086"/>
|
||||
<source>刷溶剂卡成功, 请及时将该溶剂卡对应的溶剂添加到机器中</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3089"/>
|
||||
<source>刷溶剂卡成功!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3164"/>
|
||||
<source>请及时使用墨水盒附带的IC卡激活墨水盒</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3238"/>
|
||||
<source>墨水液位报警超过%1小时,机器无法正常打印,请先添加原厂墨水再刷墨水卡,以恢复喷码机的正常工作!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3291"/>
|
||||
<source>请及时使用溶剂盒附带的IC卡激活溶剂盒</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3357"/>
|
||||
<source>溶剂液位报警超过%1小时,机器无法正常打印,请先添加溶剂再刷溶剂卡以恢复喷码机的正常工作!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="3417"/>
|
||||
<source>File not found: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="InkJetPrinter.cpp" line="2993"/>
|
||||
<location filename="InkJetPrinter.cpp" line="2947"/>
|
||||
<source>刷卡倒计时起始时间文件不存在</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
@@ -2882,7 +2916,7 @@
|
||||
</message>
|
||||
<message>
|
||||
<location filename="MainInstruction.ui" line="266"/>
|
||||
<location filename="MainInstruction.cpp" line="179"/>
|
||||
<location filename="MainInstruction.cpp" line="187"/>
|
||||
<source>额外设置</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
@@ -2903,7 +2937,7 @@
|
||||
</message>
|
||||
<message>
|
||||
<location filename="MainInstruction.ui" line="205"/>
|
||||
<location filename="MainInstruction.cpp" line="192"/>
|
||||
<location filename="MainInstruction.cpp" line="200"/>
|
||||
<source>系统授权</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
@@ -2928,28 +2962,28 @@
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="MainInstruction.cpp" line="148"/>
|
||||
<location filename="MainInstruction.cpp" line="150"/>
|
||||
<source>提示</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="MainInstruction.cpp" line="148"/>
|
||||
<location filename="MainInstruction.cpp" line="150"/>
|
||||
<source>RFID卡清零!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="MainInstruction.cpp" line="180"/>
|
||||
<location filename="MainInstruction.cpp" line="191"/>
|
||||
<location filename="MainInstruction.cpp" line="188"/>
|
||||
<location filename="MainInstruction.cpp" line="199"/>
|
||||
<source>取消授权</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="MainInstruction.cpp" line="182"/>
|
||||
<location filename="MainInstruction.cpp" line="190"/>
|
||||
<source>警告</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="MainInstruction.cpp" line="183"/>
|
||||
<location filename="MainInstruction.cpp" line="191"/>
|
||||
<source>密码错误:%1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
@@ -4335,217 +4369,202 @@ p, li { white-space: pre-wrap; }
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="570"/>
|
||||
<source>已经刷过墨水卡,需添加墨水</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="575"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="571"/>
|
||||
<source>不需要刷墨水卡!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="579"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="576"/>
|
||||
<source>确认要刷墨水卡吗?</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="579"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="576"/>
|
||||
<source>确认要刷墨水卡吗? %1 秒后将自动确认</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1113"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1104"/>
|
||||
<source>刷墨水卡成功!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1113"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1104"/>
|
||||
<source>刷墨水卡成功, 请及时将该墨水卡对应的墨水添加到机器中</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1119"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1110"/>
|
||||
<source>刷超级墨水卡失败，请联系厂商。</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="587"/>
|
||||
<source>已经刷过溶剂卡,需添加溶剂</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="592"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="583"/>
|
||||
<source>不需要刷溶剂卡!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="596"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="588"/>
|
||||
<source>确认要刷溶剂卡吗?</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="596"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="588"/>
|
||||
<source>确认要刷溶剂卡吗? %1 秒后将自动确认</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1127"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1118"/>
|
||||
<source>刷溶剂卡成功!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1127"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1118"/>
|
||||
<source>刷溶剂卡成功, 请及时将该溶剂卡对应的溶剂添加到机器中</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1133"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1124"/>
|
||||
<source>刷超级溶剂水卡失败，请联系厂商。</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="605"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="596"/>
|
||||
<source>确认要刷保养卡吗?</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="605"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="596"/>
|
||||
<source>确认要刷保养卡吗? %1 秒后将自动确认</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1157"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1148"/>
|
||||
<source>刷超级保养卡失败，请联系厂商。</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="611"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="602"/>
|
||||
<source>MAC无效卡!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="623"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="614"/>
|
||||
<source>无效卡,这张卡已经在%1时使用过</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="773"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="764"/>
|
||||
<source>设置读写器密码失败!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="791"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="782"/>
|
||||
<source>设置读写器密码成功!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="839"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="830"/>
|
||||
<source>设置读写器原始密码失败!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="902"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="893"/>
|
||||
<source>设置读写器工作模式失败!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="933"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="924"/>
|
||||
<source>设置读写器工作模式成功!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1016"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1007"/>
|
||||
<source>查询读写器地址失败</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="19"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1063"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1054"/>
|
||||
<source>警告</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1234"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1225"/>
|
||||
<source>先加墨水后刷卡：成功</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1249"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1240"/>
|
||||
<source>先加溶剂后刷卡：成功</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1274"/>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1265"/>
|
||||
<source>13.读卡器故障!</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1288"/>
|
||||
<source>请及时使用墨水盒附带的IC卡激活墨水盒</source>
|
||||
<oldsource>请及时刷墨水卡</oldsource>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="rfid/rfidmanager.cpp" line="1293"/>
|
||||
<source>请及时使用溶剂盒附带的IC卡激活溶剂盒</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
</context>
|
||||
<context>
|
||||
<name>RunTimeCtrl</name>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="135"/>
|
||||
<location filename="runtimectrl.cpp" line="136"/>
|
||||
<source>mtDate: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="136"/>
|
||||
<location filename="runtimectrl.cpp" line="137"/>
|
||||
<source>mtInterval: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="137"/>
|
||||
<location filename="runtimectrl.cpp" line="138"/>
|
||||
<source>mtEndDate: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="138"/>
|
||||
<location filename="runtimectrl.cpp" line="139"/>
|
||||
<source>mtFlag: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="139"/>
|
||||
<location filename="runtimectrl.cpp" line="140"/>
|
||||
<source>timeoutDay: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="140"/>
|
||||
<source>runTime: %1</source>
|
||||
<source>timeoutDay: %1</source>
|
||||
<oldsource>runTime: %1</oldsource>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="141"/>
|
||||
<source>runtimeMs: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="142"/>
|
||||
<source>maintenanceHours: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="158"/>
|
||||
<location filename="runtimectrl.cpp" line="159"/>
|
||||
<source>mtDate1: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="159"/>
|
||||
<location filename="runtimectrl.cpp" line="160"/>
|
||||
<source>mtInterval1: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="160"/>
|
||||
<location filename="runtimectrl.cpp" line="161"/>
|
||||
<source>mtEndDate1: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
<message>
|
||||
<location filename="runtimectrl.cpp" line="161"/>
|
||||
<location filename="runtimectrl.cpp" line="162"/>
|
||||
<source>mtFlog1: %1</source>
|
||||
<translation type="unfinished"></translation>
|
||||
</message>
|
||||
|
||||
@@ -1,333 +0,0 @@
|
||||
# 齿轮泵压力调节算法移植方案
|
||||
|
||||
## 一、概述
|
||||
|
||||
`oldProject/InkJetPrinter.cpp` 中的齿轮泵压力调节算法相比当前项目进行了重大重构，引入了**软启动斜坡**、**闭环稳定性检测**、**硬保护**、**分区Kp**、**滑动平均滤波**等机制，显著提升了压力调节的稳定性、响应速度和安全性。本文档详细对比两个版本，并给出移植方案。
|
||||
|
||||
---
|
||||
|
||||
## 二、算法对比分析
|
||||
|
||||
### 2.1 PID_realize2 函数对比
|
||||
|
||||
| 特性 | 当前项目（旧版） | oldProject（新版） |
|
||||
|------|-----------------|-------------------|
|
||||
| **PID类型** | 位置式PID（输出绝对电压） | 增量式PID（输出Δu = Kp×(e[k]-e[k-1]) + Ki×e[k]） |
|
||||
| **Kp** | 0.8 | 0.15 |
|
||||
| **Ki** | 0.02 | 0.02 |
|
||||
| **Kd** | 0.5 | 0.0（无微分项） |
|
||||
| **积分限幅** | integral_max = 12000 | 无（增量式不需要积分限幅） |
|
||||
| **自适应限幅** | 无 | 有：根据误差方向非对称限幅 |
|
||||
| **输出含义** | 绝对电压值 | 增量值（叠加到u上） |
|
||||
|
||||
**新版PID_realize2 自适应限幅逻辑：**
|
||||
|
||||
```
|
||||
err < -30（压力严重偏高）: delta_u ∈ [-6, +1] → 允许快速减速，限制加速
|
||||
err > 50（压力严重偏低）: delta_u ∈ [-2, +3] → 允许正常加速，限制减速
|
||||
-30 ≤ err ≤ 50（接近目标）: delta_u ∈ [-3, +3] → 小步长平稳调节
|
||||
```
|
||||
|
||||
**评价：** 新版PID_realize2从位置式改为增量式，避免了积分饱和问题；自适应非对称限幅让超压时能快速降速、欠压时平稳加速，大幅减少了过冲和振荡。
|
||||
|
||||
---
|
||||
|
||||
### 2.2 pressureAdj() 函数对比
|
||||
|
||||
| 特性 | 当前项目（旧版） | oldProject（新版） |
|
||||
|------|-----------------|-------------------|
|
||||
| **调用频率** | 每2次调用执行1次（50%降频） | 每次调用都执行 |
|
||||
| **停止/告警处理** | 函数末尾清零 | **函数开头**立即返回+状态全复位 |
|
||||
| **硬保护** | 无 | 压力>目标+50时强制减速，优先级最高 |
|
||||
| **软启动** | 无 | 自适应步长斜坡，800ms周期 |
|
||||
| **闭环稳定性检测** | 无 | 等待压力稳定（连续15次变化<10）才调速 |
|
||||
| **滑动平均滤波** | 无 | 10点滑动窗口均值 |
|
||||
| **分区Kp** | 无 | 三档Kp（0.05/0.04/0.03），误差越大Kp越大 |
|
||||
| **转速上限保护** | 静态maxValue截断 | 动态检测：转速达上限时禁止继续加速 |
|
||||
| **状态变量** | 无（仅static局部变量） | 6个成员变量（m_rampDone等） |
|
||||
|
||||
---
|
||||
|
||||
### 2.3 pressureAdj() 控制流程对比
|
||||
|
||||
#### 当前项目（旧版）流程：
|
||||
```
|
||||
pressureAdj() 被调用
|
||||
├─ printOut%2 != 0 → return（跳过一次）
|
||||
├─ if gearPumpRunStopFlag == false
|
||||
│ ├─ if gearPumpEnable && reclaimPumpEnable → PID_realize2（位置式PID）
|
||||
│ └─ else if u>0 || 压力偏低 → PID_realize（简单PID）
|
||||
├─ u > 0 → gearPumpValue = u，否则 = 0
|
||||
├─ 限幅800
|
||||
├─ reclaim模式下额外限幅（基于speedAlarm）
|
||||
├─ 最后再检查 gearPumpRunStopFlag / flagOfSpeedAlarm → 清零
|
||||
└─ WriteMoterPump()
|
||||
```
|
||||
|
||||
**问题：**
|
||||
1. 停止/告警状态在函数末尾才处理，中间已经执行了PID计算
|
||||
2. 无条件直接输出PID结果，没有压力稳定等待
|
||||
3. 没有超压硬保护，压力飙升时响应慢
|
||||
4. 回收泵限幅逻辑复杂且硬编码
|
||||
|
||||
#### oldProject（新版）流程：
|
||||
```
|
||||
pressureAdj() 被调用
|
||||
├─ [阶段1] 停止/告警？→ 清零状态 + 复位所有状态变量 + return
|
||||
├─ [阶段2] gearPumpEnable==false → 简单PID + return
|
||||
├─ [阶段3] 硬保护：actual > target+50 → 强制减速 + return
|
||||
├─ [阶段4] 软启动（m_rampDone==false）
|
||||
│ ├─ 每8次调用（≈800ms）执行一次
|
||||
│ ├─ 自适应步长（err>200→5, >100→3, >50→2, else→1）
|
||||
│ ├─ 超压→减1
|
||||
│ ├─ 转速上限保护
|
||||
│ └─ selfCheckDone && err在±50内 → m_rampDone=true
|
||||
├─ [阶段5] 闭环稳态调节
|
||||
│ ├─ 更新滑动平均缓冲
|
||||
│ ├─ 稳定检测：连续15次压力变化<10 → 可调速
|
||||
│ ├─ 5秒超时兜底
|
||||
│ ├─ 分区Kp调速
|
||||
│ └─ 转速上限保护
|
||||
└─ WriteMoterPump()
|
||||
```
|
||||
|
||||
**优势：**
|
||||
1. 停止/告警立即处理，状态完全复位
|
||||
2. 硬保护优先于一切，安全性最高
|
||||
3. 软启动避免开机时压力突变
|
||||
4. 闭环等待压力稳定后再调，避免管路抖动导致误调
|
||||
5. 滑动平均滤除传感器噪声
|
||||
6. 分区Kp实现大误差快调、小误差精调
|
||||
7. 转速上限保护防止电机超速
|
||||
|
||||
---
|
||||
|
||||
### 2.4 新增成员变量
|
||||
|
||||
oldProject 在 `InkJetPrinter.h` 中新增了以下成员变量：
|
||||
|
||||
```cpp
|
||||
bool m_rampDone = false; // 软启动完成标志
|
||||
int m_adjSkip = 0; // 节拍计数（软启动/超时复用）
|
||||
int m_lastPressure = 0; // 上次采样压力（稳定检测用）
|
||||
int m_stableCount = 0; // 压力连续稳定计数
|
||||
int m_pressureBuf[10] = {}; // 压力滑动平均缓冲（10点=1s）
|
||||
int m_bufIdx = 0; // 滑动平均写入索引
|
||||
```
|
||||
|
||||
此外还需要一个 `m_lastByHand` 变量用于检测手动→自动控制切换边沿，以及 `m_lastReclaimMode` 用于检测回收泵模式切换。
|
||||
|
||||
---
|
||||
|
||||
### 2.5 timerHandler 中的配套修改
|
||||
|
||||
oldProject 在 `timerHandler()` 中还有以下配套修改，确保状态机正确工作：
|
||||
|
||||
1. **开机/重启时清零**：`gearPumpValue=0, u=0`，确保软启动从0开始爬坡
|
||||
2. **自检完成时重置软启动**：`selfCheckDone` 变为1时重置 `m_rampDone=false` 及所有缓冲
|
||||
3. **手动→自动切换时重置**：`m_lastByHand` 边沿检测，切换回自动时重置软启动
|
||||
4. **回收泵模式切换时重置**：`m_lastReclaimMode` 边沿检测，模式切换时重置软启动和泄漏保护学习状态
|
||||
|
||||
---
|
||||
|
||||
## 三、移植方案
|
||||
|
||||
### 3.1 需要修改的文件
|
||||
|
||||
| 文件 | 修改内容 |
|
||||
|------|---------|
|
||||
| `InkJetPrinter.h` | 新增6个成员变量 + `m_lastByHand` + `m_lastReclaimMode` |
|
||||
| `InkJetPrinter.cpp` | 替换 `PID_realize2` + 替换 `pressureAdj` + 修改 `timerHandler` 中的配套逻辑 |
|
||||
|
||||
### 3.2 详细修改步骤
|
||||
|
||||
#### 步骤1：修改 InkJetPrinter.h — 新增成员变量
|
||||
|
||||
在 `InkJetPrinter` 类的 private 区域添加：
|
||||
|
||||
```cpp
|
||||
// 压力调节算法状态变量
|
||||
bool m_rampDone = false; // pressureAdj 软启动完成标志
|
||||
int m_adjSkip = 0; // pressureAdj 节拍计数（软启动/超时复用）
|
||||
int m_lastPressure = 0; // pressureAdj 上次采样压力（稳定检测用）
|
||||
int m_stableCount = 0; // pressureAdj 压力连续稳定计数
|
||||
int m_pressureBuf[10] = {}; // pressureAdj 压力滑动平均缓冲（10点=1s）
|
||||
int m_bufIdx = 0; // pressureAdj 滑动平均写入索引
|
||||
bool m_lastByHand = false; // 上一帧手动控制标志（边沿检测用）
|
||||
bool m_lastReclaimMode = false; // 上一帧回收泵模式（边沿检测用）
|
||||
```
|
||||
|
||||
#### 步骤2：替换 PID_realize2 函数
|
||||
|
||||
将当前项目的 `PID_realize2` 替换为 oldProject 的增量式版本。
|
||||
|
||||
**替换前（当前项目）：**
|
||||
```cpp
|
||||
float PID_realize2(float speed, float act){
|
||||
pid.Kp = 0.8;
|
||||
pid.Ki = 0.02;
|
||||
pid.Kd = 0.5;
|
||||
pid.integral_max = 12000;
|
||||
// ... 位置式PID，返回绝对电压
|
||||
}
|
||||
```
|
||||
|
||||
**替换后（oldProject）：**
|
||||
```cpp
|
||||
float PID_realize2(float speed, float act){
|
||||
// 增量式 PID：Δu = Kp*(e[k]-e[k-1]) + Ki*e[k]
|
||||
pid.Kp = 0.15f;
|
||||
pid.Ki = 0.02f;
|
||||
pid.Kd = 0.0f;
|
||||
pid.SetSpeed = speed;
|
||||
pid.ActualSpeed = act;
|
||||
pid.err = pid.SetSpeed - pid.ActualSpeed;
|
||||
|
||||
float delta_u = pid.Kp * (pid.err - pid.err_last)
|
||||
+ pid.Ki * pid.err;
|
||||
|
||||
// 自适应非对称限幅
|
||||
if(pid.err < -30.0f) {
|
||||
if(delta_u > 1.0f) delta_u = 1.0f;
|
||||
if(delta_u < -6.0f) delta_u = -6.0f;
|
||||
} else if(pid.err > 50.0f) {
|
||||
if(delta_u > 3.0f) delta_u = 3.0f;
|
||||
if(delta_u < -2.0f) delta_u = -2.0f;
|
||||
} else {
|
||||
if(delta_u > 3.0f) delta_u = 3.0f;
|
||||
if(delta_u < -3.0f) delta_u = -3.0f;
|
||||
}
|
||||
|
||||
pid.err_last = pid.err;
|
||||
return delta_u;
|
||||
}
|
||||
```
|
||||
|
||||
**注意：** 新版 `PID_realize2` 返回的是**增量 delta_u**，而不是绝对电压。调用方需要改为 `u += PID_realize2(...)` 而不是 `u = PID_realize2(...)`。
|
||||
|
||||
#### 步骤3：替换 pressureAdj() 函数
|
||||
|
||||
将整个 `pressureAdj()` 函数替换为 oldProject 版本。由于新旧版本差异较大，建议直接整体替换，不保留旧代码。
|
||||
|
||||
**关键修改点：**
|
||||
- 旧版 `pressureAdj()` 中调用 `PID_realize2` 时用的是 `u = PID_realize2(...)`（赋值），新版需要改为 `u += PID_realize2(...)`（累加），因为新版返回的是增量。
|
||||
- 注意当前项目中 `sysPara->devOp->WriteMoterPump()` 的调用方式一致，无需修改。
|
||||
- 当前项目中引用 `m_MainWidget` 而不是 `ui->tabMainWindow`，在新版 pressureAdj 中不涉及 UI 控件引用，所以不影响。
|
||||
|
||||
**实际上 oldProject 的新版 pressureAdj() 已经不再调用 PID_realize2 了**，而是采用分阶段手动调速逻辑（软启动 + 分区Kp闭环），所以 PID_realize2 的替换主要是为了完整性，实际在 gearPumpEnable 模式下不会用到。
|
||||
|
||||
#### 步骤4：修改 timerHandler() 中的配套逻辑
|
||||
|
||||
需要在当前项目的 `timerHandler()` 中做以下修改：
|
||||
|
||||
**4.1 开机/重启时清零控制字（在 gearPumpStartFlag 相关逻辑中）：**
|
||||
|
||||
当前项目（约第581-590行）：
|
||||
```cpp
|
||||
if(sysPara->para.gearPumpEnable) {
|
||||
sysPara->para.gearPumpValue = 150;
|
||||
if(tempFlag){
|
||||
sysPara->devOp->WriteMoterPump();
|
||||
tempFlag=0;
|
||||
}
|
||||
gearPumpStartFlag = true;
|
||||
}
|
||||
```
|
||||
|
||||
改为：
|
||||
```cpp
|
||||
if(sysPara->para.gearPumpEnable) {
|
||||
// 确保开机时控制字从 0 开始，让 pressureAdj 软启动从 0 爬坡
|
||||
if(sysPara->para.gearPumpValue != 0) {
|
||||
sysPara->para.gearPumpValue = 0;
|
||||
u = 0.0f;
|
||||
sysPara->devOp->WriteMoterPump();
|
||||
}
|
||||
gearPumpStartFlag = true;
|
||||
}
|
||||
```
|
||||
|
||||
**4.2 自检完成时重置软启动状态：**
|
||||
|
||||
在 `selfCheckDone = 1` 的位置（约第883行），在设置完成后添加：
|
||||
```cpp
|
||||
sysPara->status.selfCheckDone = 1;
|
||||
// 自检完成后重置软启动，从当前控制字开始，避免突变
|
||||
u = (float)sysPara->para.gearPumpValue;
|
||||
m_rampDone = false;
|
||||
m_adjSkip = 0;
|
||||
m_lastPressure = 0;
|
||||
m_stableCount = 0;
|
||||
for(int i = 0; i < 10; i++) m_pressureBuf[i] = 0;
|
||||
m_bufIdx = 0;
|
||||
```
|
||||
|
||||
**4.3 手动→自动控制切换时重置软启动：**
|
||||
|
||||
在 `isPumpValveControledByHand` 相关逻辑中（约第655行附近），添加边沿检测：
|
||||
```cpp
|
||||
// 在 timerHandler 中增加 static 变量追踪上一帧状态
|
||||
static bool lastByHand = false;
|
||||
|
||||
// 检测手动→自动边沿
|
||||
if(lastByHand && !sysPara->status.isPumpValveControledByHand)
|
||||
{
|
||||
ControledSwitchFlag = true;
|
||||
u = (float)sysPara->para.gearPumpValue;
|
||||
m_rampDone = false;
|
||||
m_adjSkip = 0;
|
||||
m_lastPressure = 0;
|
||||
m_stableCount = 0;
|
||||
for(int i = 0; i < 10; i++) m_pressureBuf[i] = 0;
|
||||
m_bufIdx = 0;
|
||||
}
|
||||
lastByHand = sysPara->status.isPumpValveControledByHand;
|
||||
```
|
||||
|
||||
**4.4 回收泵模式切换时重置软启动：**
|
||||
|
||||
在 timerHandler 中增加：
|
||||
```cpp
|
||||
static bool lastReclaimMode = false;
|
||||
if(lastReclaimMode != sysPara->para.flagOfReclaimPumEnable)
|
||||
{
|
||||
lastReclaimMode = sysPara->para.flagOfReclaimPumEnable;
|
||||
gearPumpRunNormalFlag = false;
|
||||
gearPumpRunNormalValue = 0.0f;
|
||||
m_rampDone = false;
|
||||
m_adjSkip = 0;
|
||||
m_lastPressure = 0;
|
||||
m_stableCount = 0;
|
||||
for(int i = 0; i < 10; i++) m_pressureBuf[i] = 0;
|
||||
m_bufIdx = 0;
|
||||
}
|
||||
```
|
||||
|
||||
### 3.3 注意事项
|
||||
|
||||
1. **PID_realize 函数保留**：`PID_realize` 和 `PID_init` 在非齿轮泵模式下仍被使用，保留不变。
|
||||
2. **static 变量 u**：`static float u` 在旧版和新版中都被使用，保持文件作用域定义。
|
||||
3. **WriteMoterPump() 调用**：确认当前项目中 `sysPara->devOp->WriteMoterPump()` 接口一致。
|
||||
4. **测试验证**：移植后需要在以下场景重点测试：
|
||||
- 冷启动（从0开始软启动）
|
||||
- 热重启（运行中重启）
|
||||
- 目标压力突变
|
||||
- 回收泵模式切换
|
||||
- 手动/自动控制切换
|
||||
- 超压保护触发
|
||||
- 长时间运行稳定性
|
||||
|
||||
---
|
||||
|
||||
## 四、总结
|
||||
|
||||
| 维度 | 当前项目 | oldProject | 提升 |
|
||||
|------|---------|-----------|------|
|
||||
| 超调量 | 较大（无软启动） | 小（软启动+自适应限幅） | ★★★★★ |
|
||||
| 稳态精度 | 一般（直接输出） | 高（稳定检测+分区Kp） | ★★★★ |
|
||||
| 响应速度 | 快但不稳 | 自适应（大误差快调，小误差精调） | ★★★★ |
|
||||
| 超压保护 | 无 | 有硬保护+转速上限保护 | ★★★★★ |
|
||||
| 抗噪声能力 | 弱（直接采样） | 强（10点滑动平均） | ★★★★ |
|
||||
| 代码可维护性 | 一般 | 好（分阶段清晰） | ★★★ |
|
||||
|
||||
移植风险：**低**。oldProject 的算法已在生产环境验证，且与当前项目共享相同的 `SysPara` 数据结构。修改集中在 `InkJetPrinter.cpp` 和 `InkJetPrinter.h` 两个文件，不涉及跨模块接口变更。
|
||||
Reference in New Issue
Block a user