hlp/VX5-DiaphragmPump
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

陆工调整关机流程第一版、优化排气提示

Browse Source
This commit is contained in:
byons
2026-09-07 15:51:08 +08:00
parent 0fa8ce4b51
commit fbdd064adb
12 changed files with 7025 additions and 7001 deletions
Download Patch File Download Diff File Expand all files Collapse all files
DevOp.h
+381 -381
View File
@@ -1,381 +1,381 @@
/*
* DevOp.h
*
* Created on: Jun 25, 2013
* Author: yiyu
* QQ:1036184468
* Descriptoin:
*/
#ifndef DEVOP_H_
#define DEVOP_H_
/************以前的硬件版本，跟VX5版本号冲突，取消
#define JETV1 1
#define JETV2 2
#define JETV3 3 // EP3C10F144
#define JETV23 4 // V5,V4主板编号均为4； V6没有正式投入使用
#define JETV7 7 // EP4CE15F144, ARM 335X
#define PRODUCT_VERSION(ver) ((ver>>13) & 0x7)
**********************/
class SysPara;
#include <stdio.h>
#include <QString>
#include "myinclude.h"
#include <QObject>
#include <QQueue>
#include <QMetaType>
#include <QThread>
#include <QMutex>
#include <QReadWriteLock>
#include <QSerialPort>
#define DisTraceMsg() printf("###############TRACE,Line:%d File:%s Fun:%s\n",__LINE__,__FILE__,__FUNCTION__);
#define DisWarnmsg() printf("~~~~~~~~~~~~~~~WARN,Line:%d File:%s Fun:%s\n",__LINE__,__FILE__,__FUNCTION__);
#define DisErrorMsg() printf("!!!!!!!!!!!!!!!ERROR! ,Line:%d File:%s Fun:%s\n",__LINE__,__FILE__,__FUNCTION__);
#define PRINT_CTRL_STOP 0
#define PRINT_CTRL_START 1
#define PRINT_CTRL_PAUSE 2
#define PRINT_CTRL_DAC_DISABLE 3
#define PRINT_CTRL_DAC_ENABLE 4
#define PRINT_CTRL_STOPSYNCNT 5
#define MAX_FPGA_DAC_VALUE_FOR_NEW ((1<<12)*95/100) //由于硬件原因，当DAC大于一定值后，电压不再变化，所以做一下限制
#define MAX_FPGA_DAC_VALUE_FOR_V1 (255) //老板子的最大值到256
//#define MAX_FPGA_DAC_VALUE ((PRODUCT_VERSION(sysPara->status.fpgaVersionNum) == JETV1)?MAX_FPGA_DAC_VALUE_FOR_V1:MAX_FPGA_DAC_VALUE_FOR_NEW)
#define MAX_FPGA_DAC_VALUE MAX_FPGA_DAC_VALUE_FOR_NEW
#define MAX_POINT_DISTANCE_ADJUST_VAL (1<<10) //点距微调的最大值
#define MAX_MOTOR_RUN_CURRENT 600
#define MIN_MOTOR_RUN_CURRENT 80
#define MAX_RECLAIM_BLOCK_CNT 5 //500ms
#define MAX_RELEASE_VALVE_DELAY_CNT 4
/*所有警告都是高电平警告*/
#define WARN_STATUS_INK_SWINT (1<<7) /*墨线开头，来自喷头,必须开的时候才能打印,关的时候为1，开的时候为0*/
#define WARN_STATUS_POWER_MON (1<<6) //高压报警
#define WARN_STATUS_RECYCLE_FAULT (1<<5) //高电平表示有故障
#define WARN_STATUS_INK_WARN (1<<4)
#define WARN_STATUS_SOLV_WARN (1<<3)
#define WARN_STATUS_SUMP_WARN (1<<2) //墨水渗漏
#define WARN_STATUS_HDINT (1<<1) /*喷头盖，盖上为0，否则为1,必须盖上才能打印,电磁铁有正反面*/
#define WARN_STATUS_VISCOTITY_MEASURE_READY (1<<0) // 球已经到上位等灯
#define FPGA_SYS_HZ 100000000
#define MAX_WR_MEM_SIZE (1<<16) //写空间最大地址范围
#define MAX_WR_MEM_SIZE_MASK (MAX_WR_MEM_SIZE - 1)
#define MAX_RD_MEM_SIZE (1<<9) //读空间最大地址范围
#define MAX_RD_MEM_SIZE_MASK (MAX_RD_MEM_SIZE - 1)
/* am335x core board control pwm output */
#define VISCO_PUMP_REQUEST "echo 1 > /sys/class/pwm/ecap.2/request"
#define VISCO_PUMP_RELEASE "echo 0 > /sys/class/pwm/ecap.2/request"
#define VISCO_PUMP_RUN "echo 1 > /sys/class/pwm/ecap.2/run"
#define VISCO_PUMP_STOP "echo 0 > /sys/class/pwm/ecap.2/run"
#define VISCO_PUMP_50Hz "echo 50 > /sys/class/pwm/ecap.2/period_freq"
#define VISCO_PUMP_50P "echo 50 > /sys/class/pwm/ecap.2/duty_percent"
#define VISCO_PUMP_HIGH "echo 1 > /sys/class/pwm/ecap.2/polarity"
#define VISCO_PUMP_LOW "echo 0 > /sys/class/pwm/ecap.2/polarity"
#define SUCTION_PUMP_REQUEST "echo 1 > /sys/class/pwm/ehrpwm.0:1/request"
#define SUCTION_PUMP_RELEASE "echo 0 > /sys/class/pwm/ehrpwm.0:1/request"
#define SUCTION_PUMP_RUN "echo 1 > /sys/class/pwm/ehrpwm.0:1/run"
#define SUCTION_PUMP_STOP "echo 0 > /sys/class/pwm/ehrpwm.0:1/run"
#define SUCTION_PUMP_HIGH "echo 1 > /sys/class/pwm/ehrpwm.0:1/polarity"
#define SUCTION_PUMP_LOW "echo 0 > /sys/class/pwm/ehrpwm.0:1/polarity"
#define SUCTION_PUMP_90P "echo 90 > /sys/class/pwm/ehrpwm.0:1/duty_percent"
#define SUCTION_PUMP_12000Hz "echo 12000 > /sys/class/pwm/ehrpwm.0:1/period_freq"
#define PRINT_CTRL_ADDR_BASE 0xa400
#define PRINT_DIGITAL_CHAR_BASE_ADDR (0xe000)
#define WRITE_CALENDAR_DAT_ADDR (0xb100)
#define RECYCLE_SLOT_STOP 0x1
#define RECYCLE_SLOT_CLOSE 0x2
#define RECYCLE_SLOT_OPEN 0x0
#define PRINT_START_STOP_CTRL (PRINT_CTRL_ADDR_BASE + 0x40)
#define PRINT_RESET_PRODUCT_CNT (PRINT_CTRL_ADDR_BASE + 0x41)
#define RECYCLE_SLOT_CTRL_ADDR (PRINT_CTRL_ADDR_BASE + 0x42)
#define RESUME_FAULT_ADDR (PRINT_CTRL_ADDR_BASE + 0x43)
#define VAR_CNT_ADDR (PRINT_CTRL_ADDR_BASE + 0x50)
#define VAR_CTRL_REG_ADDR (PRINT_CTRL_ADDR_BASE + 0x51)
#define MAININKCTRL_ADDR (PRINT_CTRL_ADDR_BASE + 0x59)
//#define MAININKCTRL_ADDR (PRINT_CTRL_ADDR_BASE + 0x5a)
#define WRITE_CNT1GROUP_COUNT 0xB13E
#define WRITE_CNT1GROUP_NUM 0xB13F
#define WRITE_CNT1GROUP_SETTING 0xB140
#define READ_CNT1GROUP_CURR_LOOP 0x0190
#define READ_CNT1GROUP_CURR_INDEX 0x0194
#define WRITE_CNT2GROUP_COUNT 0xB16E
#define WRITE_CNT2GROUP_NUM 0xB16F
#define WRITE_CNT2GROUP_SETTING 0xB170
#define READ_CNT2GROUP_CURR_LOOP 0x0195
#define READ_CNT2GROUP_CURR_INDEX 0x0199
#define FPGA_STATUS_BASE_ADDR 0x0000
#define FPGA_VERSOIN_NUM (FPGA_STATUS_BASE_ADDR + 0xfe)
#define READ_BUILD_DAT (FPGA_STATUS_BASE_ADDR + 0xf0)
#define READ_PRINTDATA_XOR (FPGA_STATUS_BASE_ADDR + 0xf2)
#define READ_SYNC_COUNTER (FPGA_STATUS_BASE_ADDR + 0xf4)
#define PHASE_DETECT_HIGH_VOLTAGE_TM 0x100
#define READ_CALENDAR_DAT_ADDR 0x180
#define READ_RAND_FIFO_ADDR 0x200 // 读FPGA的随机码FIFO
#define ROW_PRINT_SEQNENCE_ADDR 0xb200 //行扫描顺序
#define DAC_TABLE_ADDR 0xb280 //每一个行点对应的DAC值
#define NOT_GAP_DAC_TABLE_ADDR 0xb380 //每一个不隔点对应的DAC值
#define FULL_COL_DAC_TABLE_ADDR 0xb480 //每一个不隔点对应的DAC值
#define MATCH_FULL_DAC_TABLE_ADDR 0xB500 // 匹配满列 DAC表 起始地址
#define MATCH_1_DAC_TABLE_ADDR 0xB600 // 匹配单点 DAC表 起始地址
#define MATCH_2_DAC_TABLE_ADDR 0xB700 // 匹配两点 DAC表 起始地址
#define MATCH_3_DAC_TABLE_ADDR 0xB800 // 匹配三点 DAC表 起始地址
#define MATCH_4_DAC_TABLE_ADDR 0xB900 // 匹配四点 DAC表 起始地址
#define MATCH_5_DAC_TABLE_ADDR 0xBA00 // 匹配五点 DAC表 起始地址
#define MATCH_G1_DAC_TABLE_ADDR 0xBC00 // 匹配空一点 DAC表 起始地址
#define MATCH_G2_DAC_TABLE_ADDR 0xBC80 // 匹配空两点 DAC表 起始地址
#define MATCH_G3_DAC_TABLE_ADDR 0xBD00 // 匹配空三点 DAC表 起始地址
#define MATCH_G4_DAC_TABLE_ADDR 0xBD80 // 匹配空四点 DAC表 起始地址
#define MATCH_G5_DAC_TABLE_ADDR 0xBE00 // 匹配空五点 DAC表 起始地址
#define MATCH_G6_DAC_TABLE_ADDR 0xBE80 // 匹配空六点 DAC表 起始地址
#define MATCH_P1_DAC_TABLE_ADDR 0xBF00 // 匹配预备一 DAC表 起始地址
#define MATCH_P2_DAC_TABLE_ADDR 0xBF80 // 匹配预备二 DAC表 起始地址
#define MATCH_C_DAC_TABLE_ADDR 0xC000 // 匹配复杂 DAC表 起始地址
#define WRITE_COUNTER3_ADDR (0xb150)
#define WRITE_COUNTER4_ADDR (0xb164)
//#define READ_CNT3_CURVALUE_ADDR 0x01b4
#define READ_CNT3_CURVALUE_ADDR 0x1834
#define LOCADDR '1'
//#define NOLEDLIGHT 0x10
//#define REDLIGHTCODE 0X11
//#define YELLOWLIGHTCODE 0X13
//#define GREENLIGHTCODE 0X12
// 高四位：颜色
#define LED_COLOR_NONE 0x00 // 0000 0000
#define LED_COLOR_YELLOW 0x10 // 0001 0000
#define LED_COLOR_GREEN 0x20 // 0010 0000
#define LED_COLOR_RED 0x30 // 0011 0000
// 低四位：操作
#define LED_OP_OFF 0x00 // 灭
#define LED_OP_ON 0x01 // 亮
#define LED_OP_FLASH 0x02 // 闪烁
//绿灯
#define LED_COLOR_GREEN_ON LED_COLOR_GREEN|LED_OP_ON //绿灯亮
#define LED_COLOR_GREEN_OFF LED_COLOR_GREEN|LED_OP_OFF //绿灯灭
#define LED_COLOR_GREEN_FLASH LED_COLOR_GREEN|LED_OP_FLASH //绿灯闪烁
//红灯
#define LED_COLOR_RED_ON LED_COLOR_RED|LED_OP_ON //红灯亮
#define LED_COLOR_RED_OFF LED_COLOR_RED|LED_OP_OFF //红灯灭
#define LED_COLOR_RED_FLASH LED_COLOR_RED|LED_OP_FLASH //红灯闪烁
//黄灯
#define LED_COLOR_YELLOW_ON LED_COLOR_YELLOW|LED_OP_ON //黄灯亮
#define LED_COLOR_YELLOW_OFF LED_COLOR_YELLOW|LED_OP_OFF //黄灯灭
#define LED_COLOR_YELLOW_FLASH LED_COLOR_YELLOW|LED_OP_FLASH //黄灯闪烁
#define LED_ALL_OFF 0x00 //关闭所有灯
/*
* 请不要直接初始化此函数，如果需要，请通过SysPara的devOP来访问此类
* */
class DevOp : public QObject
{
Q_OBJECT
public :
DevOp(SysPara * sysPara);
~DevOp();
void set_totalSynPulseNum(bool wren);// 设置可变长度
void WriteMoterPump();
void controlReleaseValve(bool openFlag);
void controlMixValve(bool openFlag);
void controlInkValve(bool openFlag); //控制墨线，即供墨阀
void controlInkValvePWMSTM32(int PWMPulse);
void controlCycleValve(bool openFlag);
void controlCompressPump(bool openFlag);
void controlViscosityPump(bool openFlag);
void controlMainInkPump(bool openFlag);
void setHighVoltageAmplitudetoSTM32();
void controlReclaimPump(bool openFlag,bool fullSpeed);
void controlReclaimPump2();
void controlInkValvePWM(bool openFlag);
void controlInkValvePWM2();
void controlHeater(bool openFlag);
void controlBeeper(bool openFlag);
void controlReclaimTankOpen(bool enableFlag);
void controlReclaimTankClose(bool enableFlag);
void powerOff(void);
bool isReleaseValveOpen();
bool isMixValveOpen();
bool isInkValveOpen();
bool isInkValveOpen1();
bool isCycleValveOpen();
bool isCompressPumpOpen();
bool isViscosityPumpOpen();
bool isMainInkPumpOpen();
bool isReclaimPumpOpen();
bool isHighVoltageOpen();
bool isReclaimTankOpenEnable();
bool isReclaimTankCloseEnable();
bool isBeeperEnable();
bool isHearterEnable();
int writeFpgaPrintPara(bool ignoreWarn = false);
void readFgaStatus(void);
void writeDacValue2Fpga_No73();
void printCtrl(int cmd);
void ReadCnt1GroupStatus(void);
void ReadCnt2GroupStatus(void);
void writeCnt1GroupSetting(bool bCntByGroupEnable);
void writeCnt2GroupSetting(bool bCntByGroupEnable);
void writeFpgaCalandar(bool Enable);
void writeFpgaVariCtrl();
void readCalandarDat();
void resumeFault();
void highVoltageCtrl(int val);
void maxHighVoltageDACCtrl(int val);
void setPhaseByHand(int val);
void readPhaseDetectHighTm();
void setPhaseDetectVoltageDutyCycle(int duty);
void setBlickLightPeriod(int value);
void setOscillatorVoltage(int value);
void setDivideRatio(int value);
void setLastLineEndPointFixedValue(int value);
void mainInkCtrl();
void pumpValveCtrl(int viscosityAdjustByTemp=0);
void clearProductCnt(unsigned int mode);
unsigned int readFpgaVersionNum(void);
void fpgaWr(int addr,unsigned char*dat,int len);
void fpgaRd(int addr,unsigned char*dat,int len);
void fpgaWrD(int addr,unsigned int dat,int len);
void fpgaWrD2(int addr,unsigned char*dat,int len);
void fpgaResetWarning(char mode);
void sendSTM32SetPowerOnTimer(quint16);
void DACValueWithVoltageAdj();
void writeDataToFpga_No67HighSpeedMode(Voltage_Version version,bool flag);
bool fpgaDevOpenFlag;
void stm32Rd(int addr,unsigned char*dat,int len);
void stm32Wr(int addr,unsigned char*dat,int len);
unsigned char memWrMap[MAX_WR_MEM_SIZE];
unsigned char memRdMap[MAX_RD_MEM_SIZE];
unsigned char color_flag;
void controlRedLight(bool openFlag);
void controlGreenLight(bool openFlag);
void controlYellowLight(bool openFlag);
void controlFan1(bool openFlag);
void controlFan2(bool openFlag);
bool isGreenLightEnable();
bool isYellowLightEnable();
bool isRedLightEnable();
void readbuilDat();
void readPrintDataXor();
void readSyncCounterAtZero();
void printCtrl2(int cmd);
void ReadSomeDataForLostPrint(void);
void readSTM32Version(void);
void readSTM32Time(void);
bool stopSendDataFPGA;
bool stopSendDataSTM32;
void Read_RanddomFromFpga(); // 读FPGARANDFIFO
void RandTxtBakup(char ok);
void showData(QByteArray dat);
void writeDacValue2Fpga_No72NewVoltData();
public slots:
void resendFPGADate(int,int,unsigned char *,int,int);
void resendSTM32Date(int,int,unsigned char *,int,int);
signals:
void dataReceived(char,const QByteArray &dataReceived,int);
/***cmd:1--读 2--写*********************************************/
/***addr:地址***************************************************/
/***dat:数据指针*************************************************/
/***len:数据长度*************************************************/
/***type:1--FPGA 2--STM32***************************************/
void sendSerialDataToSTM32(int cmd,int addr,unsigned char *dat,int len,int type);
void sendSerialDataToFPGA(int cmd,int addr,unsigned char *dat,int len,int type);
private:
int WdgttyUsb0Cnt;
bool releaseValveOpenFlag;
bool mixValveFlag;
bool inkValveOpenFlag;
bool inkValveOpenFlag1;
bool cycleValveOpenFlag;
bool compressPumpOpenFlag;
bool viscosityPumpOpenFlag;
bool mainInkPumpOpenFlag;
bool reclaimPumpOpenFlag;
bool highVoltageOpenFlag;
bool reclaimTankOpenEnableFlag;
bool reclaimTankCloseEnableFlag;
bool beeperOnFlag;
bool RedLightOnFlag;
bool GreenLightOnFlag;
bool YellowLightOnFlag;
bool heaterOnFlag;
int com2;
int pwm_sp;
int pwm_fd;
int Interrupt_fd;
int iocontrl;
int DAdataout;
int pwm_ink;
int adc_fd;
qint8 OscillatorVoltage[100];//VX 电路不一样，所以需要重新调整
SysPara *sysPara;
unsigned int fpgaRdD(int addr,int len);
// 0xA451--- 为什么ARM的顺序相反呢?
typedef struct {
unsigned int varDigitalNum:4; // 数字的个数
unsigned int charRamBaseAddr:12; // 基址
unsigned int colOffset:16; // 列偏移
unsigned int horizonWidth:9;//字模宽度
unsigned int verticalOffset:6; // 行偏移
unsigned int charRowNum:6; // 每个字符占行个数
unsigned int charColNum:6; // 每个字符占列个数
unsigned int varTypeSel:4;
unsigned int dummy:1;
}reg_var_print_ctrl_t;
};
#endif /* DEVOP_H_ */
/*
* DevOp.h
*
* Created on: Jun 25, 2013
* Author: yiyu
* QQ:1036184468
* Descriptoin:
*/
#ifndef DEVOP_H_
#define DEVOP_H_
/************以前的硬件版本，跟VX5版本号冲突，取消
#define JETV1 1
#define JETV2 2
#define JETV3 3 // EP3C10F144
#define JETV23 4 // V5,V4主板编号均为4； V6没有正式投入使用
#define JETV7 7 // EP4CE15F144, ARM 335X
#define PRODUCT_VERSION(ver) ((ver>>13) & 0x7)
**********************/
class SysPara;
#include <stdio.h>
#include <QString>
#include "myinclude.h"
#include <QObject>
#include <QQueue>
#include <QMetaType>
#include <QThread>
#include <QMutex>
#include <QReadWriteLock>
#include <QSerialPort>
#define DisTraceMsg() printf("###############TRACE,Line:%d File:%s Fun:%s\n",__LINE__,__FILE__,__FUNCTION__);
#define DisWarnmsg() printf("~~~~~~~~~~~~~~~WARN,Line:%d File:%s Fun:%s\n",__LINE__,__FILE__,__FUNCTION__);
#define DisErrorMsg() printf("!!!!!!!!!!!!!!!ERROR! ,Line:%d File:%s Fun:%s\n",__LINE__,__FILE__,__FUNCTION__);
#define PRINT_CTRL_STOP 0
#define PRINT_CTRL_START 1
#define PRINT_CTRL_PAUSE 2
#define PRINT_CTRL_DAC_DISABLE 3
#define PRINT_CTRL_DAC_ENABLE 4
#define PRINT_CTRL_STOPSYNCNT 5
#define MAX_FPGA_DAC_VALUE_FOR_NEW ((1<<12)*95/100) //由于硬件原因，当DAC大于一定值后，电压不再变化，所以做一下限制
#define MAX_FPGA_DAC_VALUE_FOR_V1 (255) //老板子的最大值到256
//#define MAX_FPGA_DAC_VALUE ((PRODUCT_VERSION(sysPara->status.fpgaVersionNum) == JETV1)?MAX_FPGA_DAC_VALUE_FOR_V1:MAX_FPGA_DAC_VALUE_FOR_NEW)
#define MAX_FPGA_DAC_VALUE MAX_FPGA_DAC_VALUE_FOR_NEW
#define MAX_POINT_DISTANCE_ADJUST_VAL (1<<10) //点距微调的最大值
#define MAX_MOTOR_RUN_CURRENT 600
#define MIN_MOTOR_RUN_CURRENT 80
#define MAX_RECLAIM_BLOCK_CNT 5 //500ms
#define MAX_RELEASE_VALVE_DELAY_CNT 4
/*所有警告都是高电平警告*/
#define WARN_STATUS_INK_SWINT (1<<7) /*墨线开头，来自喷头,必须开的时候才能打印,关的时候为1，开的时候为0*/
#define WARN_STATUS_POWER_MON (1<<6) //高压报警
#define WARN_STATUS_RECYCLE_FAULT (1<<5) //高电平表示有故障
#define WARN_STATUS_INK_WARN (1<<4)
#define WARN_STATUS_SOLV_WARN (1<<3)
#define WARN_STATUS_SUMP_WARN (1<<2) //墨水渗漏
#define WARN_STATUS_HDINT (1<<1) /*喷头盖，盖上为0，否则为1,必须盖上才能打印,电磁铁有正反面*/
#define WARN_STATUS_VISCOTITY_MEASURE_READY (1<<0) // 球已经到上位等灯
#define FPGA_SYS_HZ 100000000
#define MAX_WR_MEM_SIZE (1<<16) //写空间最大地址范围
#define MAX_WR_MEM_SIZE_MASK (MAX_WR_MEM_SIZE - 1)
#define MAX_RD_MEM_SIZE (1<<9) //读空间最大地址范围
#define MAX_RD_MEM_SIZE_MASK (MAX_RD_MEM_SIZE - 1)
/* am335x core board control pwm output */
#define VISCO_PUMP_REQUEST "echo 1 > /sys/class/pwm/ecap.2/request"
#define VISCO_PUMP_RELEASE "echo 0 > /sys/class/pwm/ecap.2/request"
#define VISCO_PUMP_RUN "echo 1 > /sys/class/pwm/ecap.2/run"
#define VISCO_PUMP_STOP "echo 0 > /sys/class/pwm/ecap.2/run"
#define VISCO_PUMP_50Hz "echo 50 > /sys/class/pwm/ecap.2/period_freq"
#define VISCO_PUMP_50P "echo 50 > /sys/class/pwm/ecap.2/duty_percent"
#define VISCO_PUMP_HIGH "echo 1 > /sys/class/pwm/ecap.2/polarity"
#define VISCO_PUMP_LOW "echo 0 > /sys/class/pwm/ecap.2/polarity"
#define SUCTION_PUMP_REQUEST "echo 1 > /sys/class/pwm/ehrpwm.0:1/request"
#define SUCTION_PUMP_RELEASE "echo 0 > /sys/class/pwm/ehrpwm.0:1/request"
#define SUCTION_PUMP_RUN "echo 1 > /sys/class/pwm/ehrpwm.0:1/run"
#define SUCTION_PUMP_STOP "echo 0 > /sys/class/pwm/ehrpwm.0:1/run"
#define SUCTION_PUMP_HIGH "echo 1 > /sys/class/pwm/ehrpwm.0:1/polarity"
#define SUCTION_PUMP_LOW "echo 0 > /sys/class/pwm/ehrpwm.0:1/polarity"
#define SUCTION_PUMP_90P "echo 90 > /sys/class/pwm/ehrpwm.0:1/duty_percent"
#define SUCTION_PUMP_12000Hz "echo 12000 > /sys/class/pwm/ehrpwm.0:1/period_freq"
#define PRINT_CTRL_ADDR_BASE 0xa400
#define PRINT_DIGITAL_CHAR_BASE_ADDR (0xe000)
#define WRITE_CALENDAR_DAT_ADDR (0xb100)
#define RECYCLE_SLOT_STOP 0x1
#define RECYCLE_SLOT_CLOSE 0x2
#define RECYCLE_SLOT_OPEN 0x0
#define PRINT_START_STOP_CTRL (PRINT_CTRL_ADDR_BASE + 0x40)
#define PRINT_RESET_PRODUCT_CNT (PRINT_CTRL_ADDR_BASE + 0x41)
#define RECYCLE_SLOT_CTRL_ADDR (PRINT_CTRL_ADDR_BASE + 0x42)
#define RESUME_FAULT_ADDR (PRINT_CTRL_ADDR_BASE + 0x43)
#define VAR_CNT_ADDR (PRINT_CTRL_ADDR_BASE + 0x50)
#define VAR_CTRL_REG_ADDR (PRINT_CTRL_ADDR_BASE + 0x51)
#define MAININKCTRL_ADDR (PRINT_CTRL_ADDR_BASE + 0x59)
//#define MAININKCTRL_ADDR (PRINT_CTRL_ADDR_BASE + 0x5a)
#define WRITE_CNT1GROUP_COUNT 0xB13E
#define WRITE_CNT1GROUP_NUM 0xB13F
#define WRITE_CNT1GROUP_SETTING 0xB140
#define READ_CNT1GROUP_CURR_LOOP 0x0190
#define READ_CNT1GROUP_CURR_INDEX 0x0194
#define WRITE_CNT2GROUP_COUNT 0xB16E
#define WRITE_CNT2GROUP_NUM 0xB16F
#define WRITE_CNT2GROUP_SETTING 0xB170
#define READ_CNT2GROUP_CURR_LOOP 0x0195
#define READ_CNT2GROUP_CURR_INDEX 0x0199
#define FPGA_STATUS_BASE_ADDR 0x0000
#define FPGA_VERSOIN_NUM (FPGA_STATUS_BASE_ADDR + 0xfe)
#define READ_BUILD_DAT (FPGA_STATUS_BASE_ADDR + 0xf0)
#define READ_PRINTDATA_XOR (FPGA_STATUS_BASE_ADDR + 0xf2)
#define READ_SYNC_COUNTER (FPGA_STATUS_BASE_ADDR + 0xf4)
#define PHASE_DETECT_HIGH_VOLTAGE_TM 0x100
#define READ_CALENDAR_DAT_ADDR 0x180
#define READ_RAND_FIFO_ADDR 0x200 // 读FPGA的随机码FIFO
#define ROW_PRINT_SEQNENCE_ADDR 0xb200 //行扫描顺序
#define DAC_TABLE_ADDR 0xb280 //每一个行点对应的DAC值
#define NOT_GAP_DAC_TABLE_ADDR 0xb380 //每一个不隔点对应的DAC值
#define FULL_COL_DAC_TABLE_ADDR 0xb480 //每一个不隔点对应的DAC值
#define MATCH_FULL_DAC_TABLE_ADDR 0xB500 // 匹配满列 DAC表 起始地址
#define MATCH_1_DAC_TABLE_ADDR 0xB600 // 匹配单点 DAC表 起始地址
#define MATCH_2_DAC_TABLE_ADDR 0xB700 // 匹配两点 DAC表 起始地址
#define MATCH_3_DAC_TABLE_ADDR 0xB800 // 匹配三点 DAC表 起始地址
#define MATCH_4_DAC_TABLE_ADDR 0xB900 // 匹配四点 DAC表 起始地址
#define MATCH_5_DAC_TABLE_ADDR 0xBA00 // 匹配五点 DAC表 起始地址
#define MATCH_G1_DAC_TABLE_ADDR 0xBC00 // 匹配空一点 DAC表 起始地址
#define MATCH_G2_DAC_TABLE_ADDR 0xBC80 // 匹配空两点 DAC表 起始地址
#define MATCH_G3_DAC_TABLE_ADDR 0xBD00 // 匹配空三点 DAC表 起始地址
#define MATCH_G4_DAC_TABLE_ADDR 0xBD80 // 匹配空四点 DAC表 起始地址
#define MATCH_G5_DAC_TABLE_ADDR 0xBE00 // 匹配空五点 DAC表 起始地址
#define MATCH_G6_DAC_TABLE_ADDR 0xBE80 // 匹配空六点 DAC表 起始地址
#define MATCH_P1_DAC_TABLE_ADDR 0xBF00 // 匹配预备一 DAC表 起始地址
#define MATCH_P2_DAC_TABLE_ADDR 0xBF80 // 匹配预备二 DAC表 起始地址
#define MATCH_C_DAC_TABLE_ADDR 0xC000 // 匹配复杂 DAC表 起始地址
#define WRITE_COUNTER3_ADDR (0xb150)
#define WRITE_COUNTER4_ADDR (0xb164)
//#define READ_CNT3_CURVALUE_ADDR 0x01b4
#define READ_CNT3_CURVALUE_ADDR 0x1834
#define LOCADDR '1'
//#define NOLEDLIGHT 0x10
//#define REDLIGHTCODE 0X11
//#define YELLOWLIGHTCODE 0X13
//#define GREENLIGHTCODE 0X12
// 高四位：颜色
#define LED_COLOR_NONE 0x00 // 0000 0000
#define LED_COLOR_YELLOW 0x10 // 0001 0000
#define LED_COLOR_GREEN 0x20 // 0010 0000
#define LED_COLOR_RED 0x30 // 0011 0000
// 低四位：操作
#define LED_OP_OFF 0x00 // 灭
#define LED_OP_ON 0x01 // 亮
#define LED_OP_FLASH 0x02 // 闪烁
//绿灯
#define LED_COLOR_GREEN_ON LED_COLOR_GREEN|LED_OP_ON //绿灯亮
#define LED_COLOR_GREEN_OFF LED_COLOR_GREEN|LED_OP_OFF //绿灯灭
#define LED_COLOR_GREEN_FLASH LED_COLOR_GREEN|LED_OP_FLASH //绿灯闪烁
//红灯
#define LED_COLOR_RED_ON LED_COLOR_RED|LED_OP_ON //红灯亮
#define LED_COLOR_RED_OFF LED_COLOR_RED|LED_OP_OFF //红灯灭
#define LED_COLOR_RED_FLASH LED_COLOR_RED|LED_OP_FLASH //红灯闪烁
//黄灯
#define LED_COLOR_YELLOW_ON LED_COLOR_YELLOW|LED_OP_ON //黄灯亮
#define LED_COLOR_YELLOW_OFF LED_COLOR_YELLOW|LED_OP_OFF //黄灯灭
#define LED_COLOR_YELLOW_FLASH LED_COLOR_YELLOW|LED_OP_FLASH //黄灯闪烁
#define LED_ALL_OFF 0x00 //关闭所有灯
/*
* 请不要直接初始化此函数，如果需要，请通过SysPara的devOP来访问此类
* */
class DevOp : public QObject
{
Q_OBJECT
public :
DevOp(SysPara * sysPara);
~DevOp();
void set_totalSynPulseNum(bool wren);// 设置可变长度
void WriteMoterPump();
void controlReleaseValve(bool openFlag);
void controlMixValve(bool openFlag);
void controlInkValve(bool openFlag); //控制墨线，即供墨阀
void controlInkValvePWMSTM32(int PWMPulse);
void controlCycleValve(bool openFlag);
void controlCompressPump(bool openFlag);
void controlViscosityPump(bool openFlag);
void controlMainInkPump(bool openFlag);
void setHighVoltageAmplitudetoSTM32();
void controlReclaimPump(bool openFlag,bool fullSpeed);
void controlReclaimPump2();
void controlInkValvePWM(bool openFlag);
void controlInkValvePWM2();
void controlHeater(bool openFlag);
void controlBeeper(bool openFlag);
void controlReclaimTankOpen(bool enableFlag);
void controlReclaimTankClose(bool enableFlag);
void powerOff(void);
bool isReleaseValveOpen();
bool isMixValveOpen();
bool isInkValveOpen();
bool isInkValveOpen1();
bool isCycleValveOpen();
bool isCompressPumpOpen();
bool isViscosityPumpOpen();
bool isMainInkPumpOpen();
bool isReclaimPumpOpen();
bool isHighVoltageOpen();
bool isReclaimTankOpenEnable();
bool isReclaimTankCloseEnable();
bool isBeeperEnable();
bool isHearterEnable();
int writeFpgaPrintPara(bool ignoreWarn = false);
void readFgaStatus(void);
void writeDacValue2Fpga_No73();
void printCtrl(int cmd);
void ReadCnt1GroupStatus(void);
void ReadCnt2GroupStatus(void);
void writeCnt1GroupSetting(bool bCntByGroupEnable);
void writeCnt2GroupSetting(bool bCntByGroupEnable);
void writeFpgaCalandar(bool Enable);
void writeFpgaVariCtrl();
void readCalandarDat();
void resumeFault();
void highVoltageCtrl(int val);
void maxHighVoltageDACCtrl(int val);
void setPhaseByHand(int val);
void readPhaseDetectHighTm();
void setPhaseDetectVoltageDutyCycle(int duty);
void setBlickLightPeriod(int value);
void setOscillatorVoltage(int value);
void setDivideRatio(int value);
void setLastLineEndPointFixedValue(int value);
void mainInkCtrl();
void pumpValveCtrl(int viscosityAdjustByTemp=0);
void clearProductCnt(unsigned int mode);
unsigned int readFpgaVersionNum(void);
void fpgaWr(int addr,unsigned char*dat,int len);
void fpgaRd(int addr,unsigned char*dat,int len);
void fpgaWrD(int addr,unsigned int dat,int len);
void fpgaWrD2(int addr,unsigned char*dat,int len);
void fpgaResetWarning(char mode);
void sendSTM32SetPowerOnTimer(quint16);
void DACValueWithVoltageAdj();
void writeDataToFpga_No67HighSpeedMode(Voltage_Version version,bool flag);
bool fpgaDevOpenFlag;
void stm32Rd(int addr,unsigned char*dat,int len);
void stm32Wr(int addr,unsigned char*dat,int len);
unsigned char memWrMap[MAX_WR_MEM_SIZE];
unsigned char memRdMap[MAX_RD_MEM_SIZE];
unsigned char color_flag;
void controlRedLight(bool openFlag);
void controlGreenLight(bool openFlag);
void controlYellowLight(bool openFlag);
void controlFan1(bool openFlag);
void controlFan2(bool openFlag);
bool isGreenLightEnable();
bool isYellowLightEnable();
bool isRedLightEnable();
void readbuilDat();
void readPrintDataXor();
void readSyncCounterAtZero();
void printCtrl2(int cmd);
void ReadSomeDataForLostPrint(void);
void readSTM32Version(void);
void readSTM32Time(void);
bool stopSendDataFPGA;
bool stopSendDataSTM32;
void Read_RanddomFromFpga(); // 读FPGARANDFIFO
void RandTxtBakup(char ok);
void showData(QByteArray dat);
void writeDacValue2Fpga_No72NewVoltData();
public slots:
void resendFPGADate(int,int,unsigned char *,int,int);
void resendSTM32Date(int,int,unsigned char *,int,int);
signals:
void dataReceived(char,const QByteArray &dataReceived,int);
/***cmd:1--读 2--写*********************************************/
/***addr:地址***************************************************/
/***dat:数据指针*************************************************/
/***len:数据长度*************************************************/
/***type:1--FPGA 2--STM32***************************************/
void sendSerialDataToSTM32(int cmd,int addr,unsigned char *dat,int len,int type);
void sendSerialDataToFPGA(int cmd,int addr,unsigned char *dat,int len,int type);
private:
int WdgttyUsb0Cnt;
bool releaseValveOpenFlag;
bool mixValveFlag;
bool inkValveOpenFlag;
bool inkValveOpenFlag1;
bool cycleValveOpenFlag;
bool compressPumpOpenFlag;
bool viscosityPumpOpenFlag;
bool mainInkPumpOpenFlag;
bool reclaimPumpOpenFlag;
bool highVoltageOpenFlag;
bool reclaimTankOpenEnableFlag;
bool reclaimTankCloseEnableFlag;
bool beeperOnFlag;
bool RedLightOnFlag;
bool GreenLightOnFlag;
bool YellowLightOnFlag;
bool heaterOnFlag;
int com2;
int pwm_sp;
int pwm_fd;
int Interrupt_fd;
int iocontrl;
int DAdataout;
int pwm_ink;
int adc_fd;
qint8 OscillatorVoltage[100];//VX 电路不一样，所以需要重新调整
SysPara *sysPara;
unsigned int fpgaRdD(int addr,int len);
// 0xA451--- 为什么ARM的顺序相反呢?
typedef struct {
unsigned int varDigitalNum:4; // 数字的个数
unsigned int charRamBaseAddr:12; // 基址
unsigned int colOffset:16; // 列偏移
unsigned int horizonWidth:9;//字模宽度
unsigned int verticalOffset:6; // 行偏移
unsigned int charRowNum:6; // 每个字符占行个数
unsigned int charColNum:6; // 每个字符占列个数
unsigned int varTypeSel:4;
unsigned int dummy:1;
}reg_var_print_ctrl_t;
};
#endif /* DEVOP_H_ */
InkJetPrinter.cpp
+43 -20
View File
@@ -799,6 +799,27 @@ float PID_realize2(float speed, float act){
void InkJetPrinter::pressureAdj()
{
// 关机压力控制首次进入时从停泵状态重新开始，禁止继承正常运行或手动控制转速
if(sysPara->status.powerOffAppending && !m_powerOffPressureControlActive)
{
u = 0.0f;
sysPara->para.gearPumpValue = 0;
m_pumpState = DPUMP_STOPPED;
m_stateChangeCount = 0;
m_adjSkip = 0;
m_lastActualPressure = 0;
m_startingStepCount = 0;
m_bufValidCount = 0;
for(int i = 0; i < 10; i++) m_pressureBuf[i] = 0;
m_bufIdx = 0;
sysPara->devOp->WriteMoterPump();
m_powerOffPressureControlActive = true;
}
else if(!sysPara->status.powerOffAppending)
{
m_powerOffPressureControlActive = false;
}
// 故障停机处理
if(sysPara->status.gearPumpRunStopFlag || sysPara->status.flagOfSpeedAlarm)
{
@@ -834,6 +855,8 @@ void InkJetPrinter::pressureAdj()
int actual = sysPara->status.PRESSURE;
int target = (int)sysPara->para.pressure;
if(sysPara->status.powerOffAppending && target > 650)
target = 650; // 关机压力目标不超过650，不修改用户设定值
int err = target - actual; // 正值=压力偏低，负值=压力偏高
// 更新滑动平均缓冲
@@ -849,8 +872,9 @@ void InkJetPrinter::pressureAdj()
// 检查是否允许状态切换（距上次切换>=800ms）
bool canSwitch = (m_stateChangeCount >= MIN_STATE_INTERVAL);
// 硬保护：压力严重超标，立即强制停泵（不受800ms限制）
if(actual > target + 80)
// 关机压力上限：超过关机目标10立即停泵，不受状态和800ms切换间隔限制
int hardStopThreshold = sysPara->status.powerOffAppending ? 10 : 80;
if(actual > target + hardStopThreshold)
{
if(m_pumpState != DPUMP_STOPPED) {
u = 0.0f;
@@ -1331,20 +1355,18 @@ void InkJetPrinter::timerHandler(void){
ControledSwitchFlag = false;
pulse_3s = 0;
}
// 检测手动→自动边沿，直接恢复压力控制，不走 gearPumpStartFlag 的 3s 等待
// 检测手动→自动边沿，恢复压力控制时从停止状态安全重启
if(m_lastByHand && !sysPara->status.isPumpValveControledByHand)
{
ControledSwitchFlag = true;
u = (float)sysPara->para.gearPumpValue; // 同步当前转速，避免突变
// 重置隔膜泵状态机，从当前转速状态开始
if(u > 40.0f) {
m_pumpState = DPUMP_RUNNING; // 如果当前有转速，进入运行状态
} else {
m_pumpState = DPUMP_STOPPED; // 否则从停止状态开始
}
u = 0.0f;
sysPara->para.gearPumpValue = 0;
sysPara->devOp->WriteMoterPump();
m_pumpState = DPUMP_STOPPED;
m_stateChangeCount = 0;
m_adjSkip = 0;
m_lastActualPressure = 0;
m_startingStepCount = 0;
m_bufValidCount = 0;
for(int i = 0; i < 10; i++) m_pressureBuf[i] = 0;
m_bufIdx = 0;
@@ -1567,7 +1589,7 @@ void InkJetPrinter::timerHandler(void){
}
}
if(gearPumpRunFlag || sysPara->para.gearPumpEnable == 0)
if(gearPumpRunFlag || sysPara->para.gearPumpEnable == 0 || sysPara->status.powerOffAppending)
{
if(!sysPara->status.selfCheckDone && sysPara->status.isPrinting){
sysPara->status.selfCheckDone = true;
@@ -1615,14 +1637,13 @@ void InkJetPrinter::timerHandler(void){
if(sysPara->status.selfCheckCnt >= MAX_SELF_CHECK_CNT)
{
sysPara->status.selfCheckDone = 1;
u = (float)sysPara->para.gearPumpValue;
// 自检完成后管道恢复正常阻力，重置状态机让压力重新平稳收敛
// 不清零 u，从当前控制字开始，避免突变
if(u > 40.0f) {
m_pumpState = DPUMP_RUNNING; // 如果当前有转速，进入运行状态
} else {
m_pumpState = DPUMP_STOPPED; // 否则从停止状态开始
}
// 自检完成后管道恢复正常阻力，必须重新从STOPPED状态开始
// 清零 u 和状态机，让系统根据实际压力重新启动
u = 0.0f; // 关键：清零控制量，避免继承自检期间的大转速
sysPara->para.gearPumpValue = 0;
sysPara->devOp->WriteMoterPump(); // 立即停泵
m_pumpState = DPUMP_STOPPED; // 强制进入STOPPED状态
m_stateChangeCount = 0;
m_adjSkip = 0;
m_lastActualPressure = 0;
@@ -1667,7 +1688,9 @@ void InkJetPrinter::timerHandler(void){
for(int i = 0; i < 10; i++) m_pressureBuf[i] = 0;
m_bufIdx = 0;
}
if(pulse_100ms && sysPara->para.gearPumpEnable && !sysPara->status.isPumpValveControledByHand && ControledSwitchFlag ) {
if(pulse_100ms && sysPara->para.gearPumpEnable &&
(sysPara->status.powerOffAppending ||
(!sysPara->status.isPumpValveControledByHand && ControledSwitchFlag))) {
pressureAdj();
}
InkJetPrinter.h
+1
View File
@@ -120,6 +120,7 @@ private:
int m_bufValidCount = 0; // 缓冲区有效点数（用于启动阶段判断）
bool m_lastReclaimMode = false; // 上次回收泵使能状态
bool m_lastByHand = false; // 上次手动控制状态
bool m_powerOffPressureControlActive = false; // 关机压力控制已初始化
// 隔膜泵控制函数
float calculateTargetSpeed(int err);
PrintSetting.h
+229 -229
View File
@@ -1,229 +1,229 @@
#ifndef PRINTSETTING_H
#define PRINTSETTING_H
#include <QWidget>
#include "dialogmodifypasswd.h"
#include "DialogAuthorization.h"
#include "ParaSettingUI.h"
#include "dlginputaddr.h"
#include "dlgvarlength.h"
#include "dialogshowcounter.h"
#include "TextEditOption.h" // 需要使用文件文本编辑功能
#include <QLineEdit>
#include <QString>
#include <QTableWidget>
#include "dialogmoduleseletion.h"
#include "SectionalCounting/sectionalwid.h"
//#include "mainwindow.h"
namespace Ui {
class PrintSetting;
}
class PicScene;
class PicTextItem;
class PrintSetting : public QWidget,public ParaSettingUI
{
Q_OBJECT
public:
explicit PrintSetting(QWidget *parent = 0);
~PrintSetting();
QString cmd;
QString addr;
QString data;
QString len;
// QString comport;
QString type;
void updateSysParaToUI(); //重载
void applyUIPara(); //重载
void updateCnt1GroupsTblWgt();
void ApplyCnt1GroupSetting();
void updateSysStatusToUI();
void updateAuthorization(int auth);
void PreviewEdit(); //
void bindSysPara(SysPara *sysPara);
//分段计米
void LoadCnt1GroupSettingsToUI();
void rowWidgetCreate(int rowIndex);
void moveRow(int currentRow, int toRow);
void on_moveUp_clicked();
void on_moveDown_clicked();
//分段计米end
void PrintSettingLog();
DlgInputAddr *dlgInputAddr;
DialogModuleSeletion *dialogModuleSeletion;
bool flagOfSpecailSettng ;
bool flagOfEngineeringMode;
void SpecailSettingsDisplay();
void EngineeringModeDisplay();
bool flagOfModuleDecimal;
bool flagOfModuleHide;
void ModuleDecimalDisplay();
void ModuleHideDisplay();
void ModuleDecimalHideDisplay(const bool bEnabled);
void uiSettingForNo66();
void uiSettingForNo67();
void uiSettingForNo72();
void uiSettingForNo73();
void specailMachineSetting(bool);
void displayForAdjustVoltage(bool);
void setForAdjustVoltage();
public slots:
void updateUIForSpecialCondition();
void getFpgaVersionSetDisable();
protected:
void resizeEvent(QResizeEvent *event) override;
signals:
void HiddenFunction(bool);
void sendDataToFPGA(QString,QString,QString,QString,QString);
void engineerMode(bool);
void checkPrintIntervalSignal();
private slots:
void showMotorIsenVal(int,int);
void showReclaimTankstatusslot(unsigned char);
void on_radioButtonSpecialCondition_clicked(bool checked);
void refreshtimerHandler(void);
void ondialogShowCounterAccepted(void);
void on_checkVarLenChg();
void on_VarLenSet();
void on_pushButtonRanddomBackUP_pressed();
void PrintupdateSysParaToUI();
void showVolDacEdit(int auth);
void on_pushButtonApply_pressed();
void on_checkBoxResetCnt1CurrValue_released();
void on_checkBoxResetCnt2CurrValue_released();
void on_pushButtonClearRunTime_pressed();
void on_pushOnlyCNT1Clear_pressed();
void on_pushOnlyCNT2Clear_pressed();
void ondialogAuthorizationAccepted();
void ondialogAuthVarSetAccepted();
void on_dialogModPasswdAccepted();
void on_checkBoxSuspendAfterPhaseFault_clicked();
void on_checkBoxPowerOffAfterPhaseFault_clicked();
void on_pushButtonAuth_pressed();
// void on_pushButtonXFileSelect_pressed();
void on_spinBoxLastLineEndPointFixedValue_valueChanged(int arg1);
void on_pushButtonRecommendedSetting_clicked();
// todo
void onUpdateCnt1GroupDisp(bool bChangeToNext);
void on_Cnt3AddRowBtn_pressed();
void on_Cnt3RemoveRowBtn_pressed();
void on_Cnt3InsertRowBtn_pressed();
void on_checkBoxGroupCnt1_clicked(bool checked);
void on_cnt3RemoveAllRowsBtn_pressed();
void on_comboBoxAlterPrintEnable_currentIndexChanged(int index);
void on_checkVol1of8En_clicked(bool checked);
void on_checkmode0211_clicked(bool checked);
void on_spinBoxExpiryDate_valueChanged(int arg1);
void on_CBDateFormat1_currentIndexChanged(int index);
void showMachInfo(QString);
void showRemoteControl(QString SuperNodeIP,QString EdgeIP);
void on_volButton_clicked();
void on_spinBoxColDelay_valueChanged(int arg1);
void on_radioButtonFUllColFIxVal_clicked(bool checked);
void on_metreCountButton_clicked();
void on_lockoulsepushButton_clicked();
void on_spinBoxCnt1EndValue_valueChanged(int arg1);
//todo
void on_pushButtonUpRow_clicked();
void on_pushButtonDownRow_clicked();
void on_checkBoxResetCnt3CurrValue_released();
void on_checkBoxSaveCNTStateValue_released();
void on_checkBoxCircleProductCnt_released();
void on_pushOnlyCNT3Clear_pressed();
void setCNT1BackColor(bool flag);
void setCNT2BackColor(bool flag);
void setCNT3BackColor(bool flag);
// void setDisableFontWidth(bool);
void updateMachineMac(QString);
void setDisableFontWidth(bool);
private slots:
void autoUpdateFontWidth(const unsigned int);
void on_checkBox_FastMode_clicked();
void on_spinBox_1_valueChanged(int arg1);
void on_pushButton_2_pressed();
void on_pushButton_3_pressed();
void on_pushButton_4_pressed();
void slt_updateCntShow(bool);
Q_SIGNALS:
void authChanged(int auth);
void printPriveiw();
void change_OutputPulse();
void SwitchTimerShowItem(bool flag);
private:
Ui::PrintSetting *ui;
//MainWindow *mainWindow;
DialogAuthorization *dialogAuthorization;
DialogAuthorization *dialogAuthVarSet;
DlgVarLength *dlgvarLen;
int auth;
Dialogmodifypasswd *dialogModPasswd;
DialogShowCounter *dialogShowCounter;
int modify_vol;
int keepVolVal;
QTimer *refresh_timer;
int lockpulse;
int area_end;
int last_area_end;
PicScene* pGetPicScene;
//当前打印的长度
unsigned int current_print_col_num;
// 分段计米
SectionalWid* sectionalWid = nullptr;
void initSection();
};
#endif // PRINTSETTING_H
#ifndef PRINTSETTING_H
#define PRINTSETTING_H
#include <QWidget>
#include "dialogmodifypasswd.h"
#include "DialogAuthorization.h"
#include "ParaSettingUI.h"
#include "dlginputaddr.h"
#include "dlgvarlength.h"
#include "dialogshowcounter.h"
#include "TextEditOption.h" // 需要使用文件文本编辑功能
#include <QLineEdit>
#include <QString>
#include <QTableWidget>
#include "dialogmoduleseletion.h"
#include "SectionalCounting/sectionalwid.h"
//#include "mainwindow.h"
namespace Ui {
class PrintSetting;
}
class PicScene;
class PicTextItem;
class PrintSetting : public QWidget,public ParaSettingUI
{
Q_OBJECT
public:
explicit PrintSetting(QWidget *parent = 0);
~PrintSetting();
QString cmd;
QString addr;
QString data;
QString len;
// QString comport;
QString type;
void updateSysParaToUI(); //重载
void applyUIPara(); //重载
void updateCnt1GroupsTblWgt();
void ApplyCnt1GroupSetting();
void updateSysStatusToUI();
void updateAuthorization(int auth);
void PreviewEdit(); //
void bindSysPara(SysPara *sysPara);
//分段计米
void LoadCnt1GroupSettingsToUI();
void rowWidgetCreate(int rowIndex);
void moveRow(int currentRow, int toRow);
void on_moveUp_clicked();
void on_moveDown_clicked();
//分段计米end
void PrintSettingLog();
DlgInputAddr *dlgInputAddr;
DialogModuleSeletion *dialogModuleSeletion;
bool flagOfSpecailSettng ;
bool flagOfEngineeringMode;
void SpecailSettingsDisplay();
void EngineeringModeDisplay();
bool flagOfModuleDecimal;
bool flagOfModuleHide;
void ModuleDecimalDisplay();
void ModuleHideDisplay();
void ModuleDecimalHideDisplay(const bool bEnabled);
void uiSettingForNo66();
void uiSettingForNo67();
void uiSettingForNo72();
void uiSettingForNo73();
void specailMachineSetting(bool);
void displayForAdjustVoltage(bool);
void setForAdjustVoltage();
public slots:
void updateUIForSpecialCondition();
void getFpgaVersionSetDisable();
protected:
void resizeEvent(QResizeEvent *event) override;
signals:
void HiddenFunction(bool);
void sendDataToFPGA(QString,QString,QString,QString,QString);
void engineerMode(bool);
void checkPrintIntervalSignal();
private slots:
void showMotorIsenVal(int,int);
void showReclaimTankstatusslot(unsigned char);
void on_radioButtonSpecialCondition_clicked(bool checked);
void refreshtimerHandler(void);
void ondialogShowCounterAccepted(void);
void on_checkVarLenChg();
void on_VarLenSet();
void on_pushButtonRanddomBackUP_pressed();
void PrintupdateSysParaToUI();
void showVolDacEdit(int auth);
void on_pushButtonApply_pressed();
void on_checkBoxResetCnt1CurrValue_released();
void on_checkBoxResetCnt2CurrValue_released();
void on_pushButtonClearRunTime_pressed();
void on_pushOnlyCNT1Clear_pressed();
void on_pushOnlyCNT2Clear_pressed();
void ondialogAuthorizationAccepted();
void ondialogAuthVarSetAccepted();
void on_dialogModPasswdAccepted();
void on_checkBoxSuspendAfterPhaseFault_clicked();
void on_checkBoxPowerOffAfterPhaseFault_clicked();
void on_pushButtonAuth_pressed();
// void on_pushButtonXFileSelect_pressed();
void on_spinBoxLastLineEndPointFixedValue_valueChanged(int arg1);
void on_pushButtonRecommendedSetting_clicked();
// todo
void onUpdateCnt1GroupDisp(bool bChangeToNext);
void on_Cnt3AddRowBtn_pressed();
void on_Cnt3RemoveRowBtn_pressed();
void on_Cnt3InsertRowBtn_pressed();
void on_checkBoxGroupCnt1_clicked(bool checked);
void on_cnt3RemoveAllRowsBtn_pressed();
void on_comboBoxAlterPrintEnable_currentIndexChanged(int index);
void on_checkVol1of8En_clicked(bool checked);
void on_checkmode0211_clicked(bool checked);
void on_spinBoxExpiryDate_valueChanged(int arg1);
void on_CBDateFormat1_currentIndexChanged(int index);
void showMachInfo(QString);
void showRemoteControl(QString SuperNodeIP,QString EdgeIP);
void on_volButton_clicked();
void on_spinBoxColDelay_valueChanged(int arg1);
void on_radioButtonFUllColFIxVal_clicked(bool checked);
void on_metreCountButton_clicked();
void on_lockoulsepushButton_clicked();
void on_spinBoxCnt1EndValue_valueChanged(int arg1);
//todo
void on_pushButtonUpRow_clicked();
void on_pushButtonDownRow_clicked();
void on_checkBoxResetCnt3CurrValue_released();
void on_checkBoxSaveCNTStateValue_released();
void on_checkBoxCircleProductCnt_released();
void on_pushOnlyCNT3Clear_pressed();
void setCNT1BackColor(bool flag);
void setCNT2BackColor(bool flag);
void setCNT3BackColor(bool flag);
// void setDisableFontWidth(bool);
void updateMachineMac(QString);
void setDisableFontWidth(bool);
private slots:
void autoUpdateFontWidth(const unsigned int);
void on_checkBox_FastMode_clicked();
void on_spinBox_1_valueChanged(int arg1);
void on_pushButton_2_pressed();
void on_pushButton_3_pressed();
void on_pushButton_4_pressed();
void slt_updateCntShow(bool);
Q_SIGNALS:
void authChanged(int auth);
void printPriveiw();
void change_OutputPulse();
void SwitchTimerShowItem(bool flag);
private:
Ui::PrintSetting *ui;
//MainWindow *mainWindow;
DialogAuthorization *dialogAuthorization;
DialogAuthorization *dialogAuthVarSet;
DlgVarLength *dlgvarLen;
int auth;
Dialogmodifypasswd *dialogModPasswd;
DialogShowCounter *dialogShowCounter;
int modify_vol;
int keepVolVal;
QTimer *refresh_timer;
int lockpulse;
int area_end;
int last_area_end;
PicScene* pGetPicScene;
//当前打印的长度
unsigned int current_print_col_num;
// 分段计米
SectionalWid* sectionalWid = nullptr;
void initSection();
};
#endif // PRINTSETTING_H
QtUI.pro
+431 -431
View File
@@ -1,431 +1,431 @@
######################################################################
# Automatically generated by qmake (2.01a) ?? 11? 8 22:48:42 2013
######################################################################
# -spec /usr/local/Trolltech/QtEmbedded-4.6.3-arm/mkspecs/qws/linux-arm-g++ DEFINES+=ARM DEFINES+=QTV3 DEFINES+=VNLG
# DEFINES+=VNLG
# DEFINES+=X86TEST DEFINES+=VNLG DEFINES+=UART1
# GIT
#$ git config --global user.name "niexiong"
#$ git config --global user.email "nx@runoob.com"
# git clone git@119.23.201.56:/home/git/QtUI.git
# git pull
# git commit -am "提交说明"
# git push
# git add
# git add -f xxx.cpp #强制提交文件
# git rm
#
#
QT += core gui network serialport virtualkeyboard sql
QT += xml
#//edit@02-07
#LIBS += -L/usr/local/openssl-1.0.2 -lssl -lcrypto
greaterThan(QT_MAJOR_VERSION, 4): QT += widgets
QT_VERSION = $$[QT_VERSION]
QT_VERSION = $$split(QT_VERSION, ".")
QT_VER_MAJ = $$member(QT_VERSION, 0)
QT_VER_MIN = $$member(QT_VERSION, 1)
greaterThan(QT_VER_MAJ, 5) | greaterThan(QT_VER_MIN, 9) QT += serialbus
greaterThan(QT_MAJOR_VERSION, 4):QMAKE_CXXFLAGS += -fpermissive
greaterThan(QT_MAJOR_VERSION, 4):CONFIG += c++11
# 启用release下带调试信息，详见`VX5 Release编译发行.md`，如果不需要，可以注释掉，但请在软件绝对稳定时注释
CONFIG += qt warn_on debug_and_release
QMAKE_CXXFLAGS += -g
#QMAKE_POST_LINK += ulimit -c unlimited
LIBS += -ldl
include(qjson/upQJson.pri)
TEMPLATE = app
#ifdef SPV210
TARGET = qtUIV6
#else
TARGET = QtUI
#endif
OBJECTS_DIR +=tmp
MOC_DIR +=tmp
DEPENDPATH += .
INCLUDEPATH += .
CODECFORTR = UTF-8
#DEFINES+=ENGLISH
DEFINES+=WARNING
DEFINES+=TEMPMIMA
DEFINES+=COUNTER1_BY_GROUP #分段计米
DEFINES+=COUNTER2_BY_GROUP #分段计米2
DEFINES+=_2DCODE_ #QR二维码
DEFINES+=PICSCENE
#DEFINES+=__2451WIFI__
DEFINES+=__CONVERTERWIFI__
DEFINES+=MODBUS
greaterThan(QT_MAJOR_VERSION, 4):DEFINES+=QT_MAJOR_VERSION5
linux-g++ {
DEFINES += ARCH_X86
}
linux-aarch64-gnu-g++ {
DEFINES += ARCH_AARCH64_GNU
DEFINES += ARCH_AARCH64
}
bns-linux-aarch64-gnu-g++ {
DEFINES += ARCH_AARCH64_GNU
DEFINES += ARCH_AARCH64
DEFINES += BNS_AARCH64_DEBUG
}
HEADERS += ClickLabel.h \
DevOp.h \
DialogAuthorization.h \
DialogFileOperation.h \
DialogFontSize.h \
DialogInsertVari.h \
DialogLineSpace.h \
DigitalInput.h \
InkJetPrinter.h \
InputMethod.h \
InsertSpaceNumDialog.h \
LogInfo.h \
mainwindow.h \
MemDisplayAndEdit.h \
MyFileDialog.h \
MyInputMethod.h \
MyTextEdit.h \
OtherInfo.h \
ParaSettingUI.h \
DlgVolteParaNo73.h \
DlgVoltePara25Dots.h \
PhaseGraphic.h \
PicEdit.h \
PicWidget.h \
PrintSetting.h \
PrintTextDisplay.h \
Public.h \
PulseNumFix.h \
SysPara.h \
SystemManage.h \
SystemSetting.h \
TextEditOption.h \
TimeSettingDialog.h \
TriggerCtrl.h \
ZkEdit.h \
myinclude.h \
dlgdrawinit.h \
zkWidget.h \
qextserialbase.h \
posix_qextserialport.h \
dlginputaddr.h \
dlgshowmsg.h \
QBarCode.h \
dlgQrCode.h \
BarCode/cmdline.h \
BarCode/barcode.h \
QtQREnCode/split.h \
QtQREnCode/rsecc.h \
QtQREnCode/qrspec.h \
QtQREnCode/qrinput.h \
QtQREnCode/qrencode_inner.h \
QtQREnCode/qrencode.h \
QtQREnCode/mqrspec.h \
QtQREnCode/mmask.h \
QtQREnCode/mask.h \
QtQREnCode/bitstream.h \
Matrix/reedsol.h \
Matrix/zint.h \
Matrix/common.h \
Matrix/dm200.h \
DialogInputTxt.h \
dlgmutilanguage.h \
dlgmywarring.h \
dlgselectinputlanguage.h \
DialogSaveFile.h \
dlgvarlength.h \
VerBVersion.h \
scene/picscene.h \
scene/pictextitem.h \
scene/SceneEditOption.h \
scene/sceneviewwidget.h \
Network/NetworkManager.h \
modbus/modbus/include/mbconfig.h \
modbus/modbus/include/mbframe.h \
modbus/modbus/include/mbfunc.h \
modbus/modbus/include/mbport.h \
modbus/modbus/include/mbproto.h \
modbus/modbus/include/mbutils.h \
modbus/port/port.h \
Tftp/filetranseceiver.h \
modbus/modbus/include/mb.h \
modbus/modbus/rtu/mbcrc.h \
modbus/modbus/rtu/mbrtu.h \
dialogmodifypasswd.h \
logo_form.h \
modbus/demo.h \
dialogshowcounter.h \
dialogcycleprint.h \
print_net.h \
scene/myview.h \
modbus/modbus/tcp/mbtcp.h \
modbus/modbustcp.h \
moveinput.h \
Log/dualfilelogger.h \
Log/filelogger.h \
Log/logger.h \
Log/logglobal.h \
Log/logmessage.h \
modbus/modbustcp.h \
modbus/modbus/tcp/mbtcp.h \
modbus/demo.h \
scene/formscenedlg.h \
HtmlDelegate.h \
Serial/serial.h \
Dbredis/dbredis.h \
UpdateFPGA.h \
rfid/rfidfunction.h \
rfid/sm3.h \
rfid/sm4.h \
dialogmoduleseletion.h \
rfid/rfidmanager.h \
protocol/message.h \
protocol/tcpserver.h \
protocol/serverthread.h \
SectionalCounting/sectionalmanager.h \
SectionalCounting/sectionalwid.h \
dump.h
FORMS += dialogauthorization.ui \
dialogfileoperation.ui \
dialogfontsize.ui \
dialoginsertvari.ui \
dialoglinespace.ui \
dialogpointdistanceadjust.ui \
inkjetprinter.ui \
InputMethod.ui \
insertspacenumdialog.ui \
loginfo.ui \
mainwindow.ui \
memdisplayandedit.ui \
otherinfo.ui \
printsetting.ui \
pulsenumfix.ui \
systemmanage.ui \
systemsetting.ui \
texteditoption.ui \
timesettingdialog.ui \
triggerctrl.ui \
zkedit.ui \
picedit.ui \
dlgdrawinit.ui \
digitalinput.ui \
dlginputaddr.ui \
dlgshowmsg.ui \
QBarCode.ui \
dlgQrCode.ui \
DialogInputTxt.ui \
dlgmutilanguage.ui \
dlgmywarring.ui \
dlgselectinputlanguage.ui \
dialogsavefile.ui \
dlgvarlength.ui \
scene/sceneEditOption.ui \
Network/NetworkManager.ui \
dialoginputpasswd.ui \
dialogmodifypasswd.ui \
logo_form.ui \
dialogshowcounter.ui \
dialogcycleprint.ui \
moveinput.ui \
scene/formscenedlg.ui \
dialogmoduleseletion.ui \
SectionalCounting/sectionalwid.ui
SOURCES += ClickLabel.cpp \
DevOp.cpp \
DialogAuthorization.cpp \
DialogFileOperation.cpp \
DialogFontSize.cpp \
DialogInsertVari.cpp \
DialogLineSpace.cpp \
DigitalInput.cpp \
InkJetPrinter.cpp \
InputMethod.cpp \
InsertSpaceNumDialog.cpp \
LogInfo.cpp \
main.cpp \
dump.cpp \
mainwindow.cpp \
MemDisplayAndEdit.cpp \
MyFileDialog.cpp \
MyInputMethod.cpp \
MyTextEdit.cpp \
OtherInfo.cpp \
ParaSettingUI.cpp \
DlgVolteParaNo73.cpp \
DlgVoltePara25Dots.cpp \
PhaseGraphic.cpp \
PicEdit.cpp \
PicWidget.cpp \
PrintSetting.cpp \
PrintTextDisplay.cpp \
Public.cpp \
PulseNumFix.cpp \
SysPara.cpp \
SystemManage.cpp \
SystemSetting.cpp \
TextEditOption.cpp \
TimeSettingDialog.cpp \
TriggerCtrl.cpp \
ZkEdit.cpp \
dlgdrawinit.cpp \
zkWidget.cpp \
qextserialbase.cpp \
posix_qextserialport.cpp \
dlginputaddr.cpp \
dlgshowmsg.cpp \
QBarCode.cpp \
dlgQrCode.cpp \
BarCode/ps.c \
BarCode/plessey.c \
BarCode/pcl.c \
BarCode/msi.c \
BarCode/library.c \
BarCode/i25.c \
BarCode/ean.c \
BarCode/code128.c \
BarCode/code93.c \
BarCode/code39.c \
BarCode/codabar.c \
BarCode/cmdline.c \
QtQREnCode/split.c \
QtQREnCode/rsecc.c \
QtQREnCode/qrspec.c \
QtQREnCode/qrinput.c \
QtQREnCode/qrencode.c \
QtQREnCode/mqrspec.c \
QtQREnCode/mmask.c \
QtQREnCode/mask.c \
QtQREnCode/bitstream.c \
Matrix/common.cpp \
Matrix/reedsol.cpp \
Matrix/dm200.cpp \
Matrix/drawmatrix.cpp \
DialogInputTxt.cpp \
dlgmutilanguage.cpp \
dlgmywarring.cpp \
dlgselectinputlanguage.cpp \
DialogSaveFile.cpp \
dlgvarlength.cpp \
scene/picscene.cpp \
scene/pictextitem.cpp \
scene/SceneEditOption.cpp \
scene/sceneviewwidget.cpp \
Network/NetworkManager.cpp \
modbus/modbus/mb.c \
modbus/modbus/functions/mbfunccoils.c \
modbus/modbus/functions/mbfuncdiag.c \
modbus/modbus/functions/mbfuncdisc.c \
modbus/modbus/functions/mbfuncholding.c \
modbus/modbus/functions/mbfuncinput.c \
modbus/modbus/functions/mbfuncother.c \
modbus/modbus/functions/mbutils.c \
modbus/port/portevent.c \
modbus/port/portother.c \
Tftp/filetranseceiver.cpp \
modbus/port/portserial.c \
modbus/port/porttimer.c \
modbus/modbus/rtu/mbcrc.c \
modbus/modbus/rtu/mbrtu.c \
dialogmodifypasswd.cpp \
logo_form.cpp \
dialogshowcounter.cpp \
dialogcycleprint.cpp \
print_net.cpp \
scene/myview.cpp \
moveinput.cpp \
Log/dualfilelogger.cpp \
Log/filelogger.cpp \
Log/logger.cpp \
Log/logmessage.cpp \
modbus/modbustcp.cpp \
modbus/modbus/tcp/mbtcp.c \
modbus/port/porttcp.c \
scene/formscenedlg.cpp \
HtmlDelegate.cpp \
Serial/serial.cpp \
Dbredis/dbredis.cpp \
UpdateFPGA.cpp \
rfid/rfidfunction.cpp \
rfid/sm3.cpp \
rfid/sm4.cpp \
dialogmoduleseletion.cpp \
rfid/rfidmanager.cpp \
protocol/message.cpp \
protocol/tcpserver.cpp \
protocol/serverthread.cpp \
SectionalCounting/sectionalmanager.cpp \
SectionalCounting/sectionalwid.cpp
#RESOURCES +=image.qrc EN/image.qrc
RESOURCES += \
image.qrc
##ifdef VNLG
#TRANSLATIONS +=./../V0211X86QRVN/chinese.ts ./../V0211X86QRVN/vena.ts ./../V0211X86QRVN/english.ts
TRANSLATIONS += ./vena.ts ./chinese.ts ./turkey.ts ./spanish.ts ./thai.ts ./english.ts ./korean.ts ./farsi.ts
#./../V0211X86QRVN/english.ts
##else
#TRANSLATIONS +=./../V0211X86QR/chinese.ts ./../V0211X86QR/english.ts
##endif
OTHER_FILES += \
buge_record.txt
if(contains(DEFINES,__CONVERTERWIFI__))
{
DEFINES += CONFIG_CTRL_IFACE
DEFINES += CONFIG_CTRL_IFACE_UNIX
#SOURCES += ../../src/utils/os_unix.c
SOURCES += /third_part/wpa_supplicant_hostapd/wpa_supplicant_hostapd-0.8/src/utils/os_unix.c
SOURCES += /third_part/wpa_supplicant_hostapd/wpa_supplicant_hostapd-0.8/src/common/wpa_ctrl.c
INCLUDEPATH += /third_part/wpa_supplicant_hostapd/wpa_supplicant_hostapd-0.8/src
INCLUDEPATH += /third_part/wpa_supplicant_hostapd/wpa_supplicant_hostapd-0.8/src/utils
}
if(contains(DEFINES,MODBUS))
{
INCLUDEPATH += $$PWD/modbus/port
INCLUDEPATH += $$PWD/modbus/modbus/include
INCLUDEPATH += $$PWD/modbus/modbus/rtu
INCLUDEPATH += $$PWD/modbus/modbus/tcp
#HEADERS += modbus/modbustcp.h
#SOURCES += modbus/modbustcp.cpp
}
if(contains(DEFINES,__2451WIFI__))
{
#DEFINES += CONFIG_CTRL_IFACE
#DEFINES += CONFIG_CTRL_IFACE_UNIX
##SOURCES += ../../src/utils/os_unix.c
#SOURCES += /home/student/newDisk/2451_linux/wpa_supplicant_hostapd/wpa_supplicant_hostapd-0.8/src/utils/os_unix.c
#SOURCES += /home/student/newDisk/2451_linux/wpa_supplicant_hostapd/wpa_supplicant_hostapd-0.8/src/common/wpa_ctrl.c
#INCLUDEPATH += /home/student/newDisk/2451_linux/wpa_supplicant_hostapd/wpa_supplicant_hostapd-0.8/src
#INCLUDEPATH += /home/student/newDisk/2451_linux/wpa_supplicant_hostapd/wpa_supplicant_hostapd-0.8/src/utils
}
######################################################################
# Automatically generated by qmake (2.01a) ?? 11? 8 22:48:42 2013
######################################################################
# -spec /usr/local/Trolltech/QtEmbedded-4.6.3-arm/mkspecs/qws/linux-arm-g++ DEFINES+=ARM DEFINES+=QTV3 DEFINES+=VNLG
# DEFINES+=VNLG
# DEFINES+=X86TEST DEFINES+=VNLG DEFINES+=UART1
# GIT
#$ git config --global user.name "niexiong"
#$ git config --global user.email "nx@runoob.com"
# git clone git@119.23.201.56:/home/git/QtUI.git
# git pull
# git commit -am "提交说明"
# git push
# git add
# git add -f xxx.cpp #强制提交文件
# git rm
#
#
QT += core gui network serialport virtualkeyboard sql
QT += xml
#//edit@02-07
#LIBS += -L/usr/local/openssl-1.0.2 -lssl -lcrypto
greaterThan(QT_MAJOR_VERSION, 4): QT += widgets
QT_VERSION = $$[QT_VERSION]
QT_VERSION = $$split(QT_VERSION, ".")
QT_VER_MAJ = $$member(QT_VERSION, 0)
QT_VER_MIN = $$member(QT_VERSION, 1)
greaterThan(QT_VER_MAJ, 5) | greaterThan(QT_VER_MIN, 9) QT += serialbus
greaterThan(QT_MAJOR_VERSION, 4):QMAKE_CXXFLAGS += -fpermissive
greaterThan(QT_MAJOR_VERSION, 4):CONFIG += c++11
# 启用release下带调试信息，详见`VX5 Release编译发行.md`，如果不需要，可以注释掉，但请在软件绝对稳定时注释
CONFIG += qt warn_on debug_and_release
QMAKE_CXXFLAGS += -g
#QMAKE_POST_LINK += ulimit -c unlimited
LIBS += -ldl
include(qjson/upQJson.pri)
TEMPLATE = app
#ifdef SPV210
TARGET = qtUIV6
#else
TARGET = QtUI
#endif
OBJECTS_DIR +=tmp
MOC_DIR +=tmp
DEPENDPATH += .
INCLUDEPATH += .
CODECFORTR = UTF-8
#DEFINES+=ENGLISH
DEFINES+=WARNING
DEFINES+=TEMPMIMA
DEFINES+=COUNTER1_BY_GROUP #分段计米
DEFINES+=COUNTER2_BY_GROUP #分段计米2
DEFINES+=_2DCODE_ #QR二维码
DEFINES+=PICSCENE
#DEFINES+=__2451WIFI__
DEFINES+=__CONVERTERWIFI__
DEFINES+=MODBUS
greaterThan(QT_MAJOR_VERSION, 4):DEFINES+=QT_MAJOR_VERSION5
linux-g++ {
DEFINES += ARCH_X86
}
linux-aarch64-gnu-g++ {
DEFINES += ARCH_AARCH64_GNU
DEFINES += ARCH_AARCH64
}
bns-linux-aarch64-gnu-g++ {
DEFINES += ARCH_AARCH64_GNU
DEFINES += ARCH_AARCH64
DEFINES += BNS_AARCH64_DEBUG
}
HEADERS += ClickLabel.h \
DevOp.h \
DialogAuthorization.h \
DialogFileOperation.h \
DialogFontSize.h \
DialogInsertVari.h \
DialogLineSpace.h \
DigitalInput.h \
InkJetPrinter.h \
InputMethod.h \
InsertSpaceNumDialog.h \
LogInfo.h \
mainwindow.h \
MemDisplayAndEdit.h \
MyFileDialog.h \
MyInputMethod.h \
MyTextEdit.h \
OtherInfo.h \
ParaSettingUI.h \
DlgVolteParaNo73.h \
DlgVoltePara25Dots.h \
PhaseGraphic.h \
PicEdit.h \
PicWidget.h \
PrintSetting.h \
PrintTextDisplay.h \
Public.h \
PulseNumFix.h \
SysPara.h \
SystemManage.h \
SystemSetting.h \
TextEditOption.h \
TimeSettingDialog.h \
TriggerCtrl.h \
ZkEdit.h \
myinclude.h \
dlgdrawinit.h \
zkWidget.h \
qextserialbase.h \
posix_qextserialport.h \
dlginputaddr.h \
dlgshowmsg.h \
QBarCode.h \
dlgQrCode.h \
BarCode/cmdline.h \
BarCode/barcode.h \
QtQREnCode/split.h \
QtQREnCode/rsecc.h \
QtQREnCode/qrspec.h \
QtQREnCode/qrinput.h \
QtQREnCode/qrencode_inner.h \
QtQREnCode/qrencode.h \
QtQREnCode/mqrspec.h \
QtQREnCode/mmask.h \
QtQREnCode/mask.h \
QtQREnCode/bitstream.h \
Matrix/reedsol.h \
Matrix/zint.h \
Matrix/common.h \
Matrix/dm200.h \
DialogInputTxt.h \
dlgmutilanguage.h \
dlgmywarring.h \
dlgselectinputlanguage.h \
DialogSaveFile.h \
dlgvarlength.h \
VerBVersion.h \
scene/picscene.h \
scene/pictextitem.h \
scene/SceneEditOption.h \
scene/sceneviewwidget.h \
Network/NetworkManager.h \
modbus/modbus/include/mbconfig.h \
modbus/modbus/include/mbframe.h \
modbus/modbus/include/mbfunc.h \
modbus/modbus/include/mbport.h \
modbus/modbus/include/mbproto.h \
modbus/modbus/include/mbutils.h \
modbus/port/port.h \
Tftp/filetranseceiver.h \
modbus/modbus/include/mb.h \
modbus/modbus/rtu/mbcrc.h \
modbus/modbus/rtu/mbrtu.h \
dialogmodifypasswd.h \
logo_form.h \
modbus/demo.h \
dialogshowcounter.h \
dialogcycleprint.h \
print_net.h \
scene/myview.h \
modbus/modbus/tcp/mbtcp.h \
modbus/modbustcp.h \
moveinput.h \
Log/dualfilelogger.h \
Log/filelogger.h \
Log/logger.h \
Log/logglobal.h \
Log/logmessage.h \
modbus/modbustcp.h \
modbus/modbus/tcp/mbtcp.h \
modbus/demo.h \
scene/formscenedlg.h \
HtmlDelegate.h \
Serial/serial.h \
Dbredis/dbredis.h \
UpdateFPGA.h \
rfid/rfidfunction.h \
rfid/sm3.h \
rfid/sm4.h \
dialogmoduleseletion.h \
rfid/rfidmanager.h \
protocol/message.h \
protocol/tcpserver.h \
protocol/serverthread.h \
SectionalCounting/sectionalmanager.h \
SectionalCounting/sectionalwid.h \
dump.h
FORMS += dialogauthorization.ui \
dialogfileoperation.ui \
dialogfontsize.ui \
dialoginsertvari.ui \
dialoglinespace.ui \
dialogpointdistanceadjust.ui \
inkjetprinter.ui \
InputMethod.ui \
insertspacenumdialog.ui \
loginfo.ui \
mainwindow.ui \
memdisplayandedit.ui \
otherinfo.ui \
printsetting.ui \
pulsenumfix.ui \
systemmanage.ui \
systemsetting.ui \
texteditoption.ui \
timesettingdialog.ui \
triggerctrl.ui \
zkedit.ui \
picedit.ui \
dlgdrawinit.ui \
digitalinput.ui \
dlginputaddr.ui \
dlgshowmsg.ui \
QBarCode.ui \
dlgQrCode.ui \
DialogInputTxt.ui \
dlgmutilanguage.ui \
dlgmywarring.ui \
dlgselectinputlanguage.ui \
dialogsavefile.ui \
dlgvarlength.ui \
scene/sceneEditOption.ui \
Network/NetworkManager.ui \
dialoginputpasswd.ui \
dialogmodifypasswd.ui \
logo_form.ui \
dialogshowcounter.ui \
dialogcycleprint.ui \
moveinput.ui \
scene/formscenedlg.ui \
dialogmoduleseletion.ui \
SectionalCounting/sectionalwid.ui
SOURCES += ClickLabel.cpp \
DevOp.cpp \
DialogAuthorization.cpp \
DialogFileOperation.cpp \
DialogFontSize.cpp \
DialogInsertVari.cpp \
DialogLineSpace.cpp \
DigitalInput.cpp \
InkJetPrinter.cpp \
InputMethod.cpp \
InsertSpaceNumDialog.cpp \
LogInfo.cpp \
main.cpp \
dump.cpp \
mainwindow.cpp \
MemDisplayAndEdit.cpp \
MyFileDialog.cpp \
MyInputMethod.cpp \
MyTextEdit.cpp \
OtherInfo.cpp \
ParaSettingUI.cpp \
DlgVolteParaNo73.cpp \
DlgVoltePara25Dots.cpp \
PhaseGraphic.cpp \
PicEdit.cpp \
PicWidget.cpp \
PrintSetting.cpp \
PrintTextDisplay.cpp \
Public.cpp \
PulseNumFix.cpp \
SysPara.cpp \
SystemManage.cpp \
SystemSetting.cpp \
TextEditOption.cpp \
TimeSettingDialog.cpp \
TriggerCtrl.cpp \
ZkEdit.cpp \
dlgdrawinit.cpp \
zkWidget.cpp \
qextserialbase.cpp \
posix_qextserialport.cpp \
dlginputaddr.cpp \
dlgshowmsg.cpp \
QBarCode.cpp \
dlgQrCode.cpp \
BarCode/ps.c \
BarCode/plessey.c \
BarCode/pcl.c \
BarCode/msi.c \
BarCode/library.c \
BarCode/i25.c \
BarCode/ean.c \
BarCode/code128.c \
BarCode/code93.c \
BarCode/code39.c \
BarCode/codabar.c \
BarCode/cmdline.c \
QtQREnCode/split.c \
QtQREnCode/rsecc.c \
QtQREnCode/qrspec.c \
QtQREnCode/qrinput.c \
QtQREnCode/qrencode.c \
QtQREnCode/mqrspec.c \
QtQREnCode/mmask.c \
QtQREnCode/mask.c \
QtQREnCode/bitstream.c \
Matrix/common.cpp \
Matrix/reedsol.cpp \
Matrix/dm200.cpp \
Matrix/drawmatrix.cpp \
DialogInputTxt.cpp \
dlgmutilanguage.cpp \
dlgmywarring.cpp \
dlgselectinputlanguage.cpp \
DialogSaveFile.cpp \
dlgvarlength.cpp \
scene/picscene.cpp \
scene/pictextitem.cpp \
scene/SceneEditOption.cpp \
scene/sceneviewwidget.cpp \
Network/NetworkManager.cpp \
modbus/modbus/mb.c \
modbus/modbus/functions/mbfunccoils.c \
modbus/modbus/functions/mbfuncdiag.c \
modbus/modbus/functions/mbfuncdisc.c \
modbus/modbus/functions/mbfuncholding.c \
modbus/modbus/functions/mbfuncinput.c \
modbus/modbus/functions/mbfuncother.c \
modbus/modbus/functions/mbutils.c \
modbus/port/portevent.c \
modbus/port/portother.c \
Tftp/filetranseceiver.cpp \
modbus/port/portserial.c \
modbus/port/porttimer.c \
modbus/modbus/rtu/mbcrc.c \
modbus/modbus/rtu/mbrtu.c \
dialogmodifypasswd.cpp \
logo_form.cpp \
dialogshowcounter.cpp \
dialogcycleprint.cpp \
print_net.cpp \
scene/myview.cpp \
moveinput.cpp \
Log/dualfilelogger.cpp \
Log/filelogger.cpp \
Log/logger.cpp \
Log/logmessage.cpp \
modbus/modbustcp.cpp \
modbus/modbus/tcp/mbtcp.c \
modbus/port/porttcp.c \
scene/formscenedlg.cpp \
HtmlDelegate.cpp \
Serial/serial.cpp \
Dbredis/dbredis.cpp \
UpdateFPGA.cpp \
rfid/rfidfunction.cpp \
rfid/sm3.cpp \
rfid/sm4.cpp \
dialogmoduleseletion.cpp \
rfid/rfidmanager.cpp \
protocol/message.cpp \
protocol/tcpserver.cpp \
protocol/serverthread.cpp \
SectionalCounting/sectionalmanager.cpp \
SectionalCounting/sectionalwid.cpp
#RESOURCES +=image.qrc EN/image.qrc
RESOURCES += \
image.qrc
##ifdef VNLG
#TRANSLATIONS +=./../V0211X86QRVN/chinese.ts ./../V0211X86QRVN/vena.ts ./../V0211X86QRVN/english.ts
TRANSLATIONS += ./vena.ts ./chinese.ts ./turkey.ts ./spanish.ts ./thai.ts ./english.ts ./korean.ts ./farsi.ts
#./../V0211X86QRVN/english.ts
##else
#TRANSLATIONS +=./../V0211X86QR/chinese.ts ./../V0211X86QR/english.ts
##endif
OTHER_FILES += \
buge_record.txt
if(contains(DEFINES,__CONVERTERWIFI__))
{
DEFINES += CONFIG_CTRL_IFACE
DEFINES += CONFIG_CTRL_IFACE_UNIX
#SOURCES += ../../src/utils/os_unix.c
SOURCES += /third_part/wpa_supplicant_hostapd/wpa_supplicant_hostapd-0.8/src/utils/os_unix.c
SOURCES += /third_part/wpa_supplicant_hostapd/wpa_supplicant_hostapd-0.8/src/common/wpa_ctrl.c
INCLUDEPATH += /third_part/wpa_supplicant_hostapd/wpa_supplicant_hostapd-0.8/src
INCLUDEPATH += /third_part/wpa_supplicant_hostapd/wpa_supplicant_hostapd-0.8/src/utils
}
if(contains(DEFINES,MODBUS))
{
INCLUDEPATH += $$PWD/modbus/port
INCLUDEPATH += $$PWD/modbus/modbus/include
INCLUDEPATH += $$PWD/modbus/modbus/rtu
INCLUDEPATH += $$PWD/modbus/modbus/tcp
#HEADERS += modbus/modbustcp.h
#SOURCES += modbus/modbustcp.cpp
}
if(contains(DEFINES,__2451WIFI__))
{
#DEFINES += CONFIG_CTRL_IFACE
#DEFINES += CONFIG_CTRL_IFACE_UNIX
##SOURCES += ../../src/utils/os_unix.c
#SOURCES += /home/student/newDisk/2451_linux/wpa_supplicant_hostapd/wpa_supplicant_hostapd-0.8/src/utils/os_unix.c
#SOURCES += /home/student/newDisk/2451_linux/wpa_supplicant_hostapd/wpa_supplicant_hostapd-0.8/src/common/wpa_ctrl.c
#INCLUDEPATH += /home/student/newDisk/2451_linux/wpa_supplicant_hostapd/wpa_supplicant_hostapd-0.8/src
#INCLUDEPATH += /home/student/newDisk/2451_linux/wpa_supplicant_hostapd/wpa_supplicant_hostapd-0.8/src/utils
}
SysPara.h
+1344 -1344
View File
File diff suppressed because it is too large Load Diff
SystemSetting.cpp
+847 -847
View File
File diff suppressed because it is too large Load Diff
SystemSetting.h
+70 -70
View File
@@ -1,70 +1,70 @@
#ifndef SSYSTEMSETTING_H
#define SSYSTEMSETTING_H
#include <QWidget>
#include <QProgressBar>
#include "ParaSettingUI.h"
#include "TimeSettingDialog.h"
#include <QTimer>
#include "DialogAuthorization.h"
#include "dlgmutilanguage.h"
#include <iostream>
namespace Ui {
class SystemSetting;
}
class SystemSetting : public QWidget,public ParaSettingUI
{
Q_OBJECT
public:
explicit SystemSetting(QWidget *parent = 0);
~SystemSetting();
void updateSysParaToUI(); //重载
void applyUIPara(); //重载
void updateSysStatusToUI(); //重载
QProgressBar progressBar;
void updateReclaimTime(int time);
void updateViscosityAdjust(int offset);
void updateAuthorization(int auth);
void setSpinBoxPressureMaxValue(int pressureVal);
void SystemSettingLog();
bool lastHighVoltageOpen;
public slots:
void setFreqFixVisible(bool visible);
Q_SIGNALS:
void changeEditMode(int);
void setRunStatus(QString);
void pressureAdjust();
private slots:
void setInterfaceMode();
void SystemupdateSysParaToUI();
void on_spinBoxReclaimPumpPower_valueChanged(int arg1);
void on_pushButtonCleanUP_pressed();
void on_pushButtonHighVoltageData_pressed();
void on_pushButtonApply_pressed();
void on_pushButtonSearchBestOscillatorVoltage_pressed();
void on_pushButtonSearchBestOscillatorFreq_pressed();
void timerHandler();
void on_spinBoxOscillatorVoltage_valueChanged(int arg1);
void on_pushButtonInterFace_pressed();
void ondialogAuthorizationAccepted();
void onCleanUPNow();
void timerHandler2();
void autoControlPressure();
private:
Ui::SystemSetting *ui;
DlgMutiLanguage dlgLanguage;
QTimer *timer,*timer2, *SetinkcloseCountTimer, *timerAuto;
unsigned char enCleanUpAppendFlag; // 0空闲，1关开回收槽,2手动,3清洗,4恢复,5停止,6
bool r_PumpValveControledByHand;
DialogAuthorization *dialogUpateMm;
};
#endif // SSYSTEMSETTING_H
#ifndef SSYSTEMSETTING_H
#define SSYSTEMSETTING_H
#include <QWidget>
#include <QProgressBar>
#include "ParaSettingUI.h"
#include "TimeSettingDialog.h"
#include <QTimer>
#include "DialogAuthorization.h"
#include "dlgmutilanguage.h"
#include <iostream>
namespace Ui {
class SystemSetting;
}
class SystemSetting : public QWidget,public ParaSettingUI
{
Q_OBJECT
public:
explicit SystemSetting(QWidget *parent = 0);
~SystemSetting();
void updateSysParaToUI(); //重载
void applyUIPara(); //重载
void updateSysStatusToUI(); //重载
QProgressBar progressBar;
void updateReclaimTime(int time);
void updateViscosityAdjust(int offset);
void updateAuthorization(int auth);
void setSpinBoxPressureMaxValue(int pressureVal);
void SystemSettingLog();
bool lastHighVoltageOpen;
public slots:
void setFreqFixVisible(bool visible);
Q_SIGNALS:
void changeEditMode(int);
void setRunStatus(QString);
void pressureAdjust();
private slots:
void setInterfaceMode();
void SystemupdateSysParaToUI();
void on_spinBoxReclaimPumpPower_valueChanged(int arg1);
void on_pushButtonCleanUP_pressed();
void on_pushButtonHighVoltageData_pressed();
void on_pushButtonApply_pressed();
void on_pushButtonSearchBestOscillatorVoltage_pressed();
void on_pushButtonSearchBestOscillatorFreq_pressed();
void timerHandler();
void on_spinBoxOscillatorVoltage_valueChanged(int arg1);
void on_pushButtonInterFace_pressed();
void ondialogAuthorizationAccepted();
void onCleanUPNow();
void timerHandler2();
void autoControlPressure();
private:
Ui::SystemSetting *ui;
DlgMutiLanguage dlgLanguage;
QTimer *timer,*timer2, *SetinkcloseCountTimer, *timerAuto;
unsigned char enCleanUpAppendFlag; // 0空闲，1关开回收槽,2手动,3清洗,4恢复,5停止,6
bool r_PumpValveControledByHand;
DialogAuthorization *dialogUpateMm;
};
#endif // SSYSTEMSETTING_H
inkjetprinter.ui
+2595 -2595
View File
File diff suppressed because it is too large Load Diff
mainwindow.cpp
+21 -22
View File
@@ -2079,8 +2079,12 @@ void MainWindow::airPushingProcess()
}
if(sysPara->status.airPushingOnTime >= sysPara->para.airPushDurationSec * 1000){
sysPara->devOp->controlViscosityPump(false);
sysPara->devOp->controlCycleValve(false);
if(sysPara->devOp->isViscosityPumpOpen())
sysPara->devOp->controlViscosityPump(false);
if(sysPara->devOp->isCycleValveOpen())
sysPara->devOp->controlCycleValve(false);
if(!sysPara->devOp->isReclaimPumpOpen())
sysPara->devOp->controlReclaimPump(true, false);
@@ -2225,13 +2229,16 @@ void MySleep(unsigned int msec);
* 关机前务必保存参数
* */
void MainWindow::checkForPowerOff(){
if(m_powerOffInProgress)
return;
if(sysPara->status.powerOffAppending){
m_powerOffInProgress = true;
if(!sysPara->status.selfCheckDone)
sysPara->status.selfCheckDone = true;
this->setDisabled(true);
emit setDisableAll();
////////关机时提高转速和回收泵压力，粘度泵和循环阀/////
quint16 gearPumpValue_backup = sysPara->para.gearPumpValue;
////////关机时通过闭环控制维持压力，控制目标不超过650/////
int reclaimPumpPWMWidth_backup = sysPara->para.reclaimPumpPWMWidth;;
if(!(sysPara->status.statWarn & WARN_STATUS_INK_WARN))
{
@@ -2257,17 +2264,11 @@ void MainWindow::checkForPowerOff(){
}
}
sysPara->devOp->controlReclaimTankOpen(true);
sysPara->status.isPumpValveControledByHand = true; //停止自动
sysPara->status.isPumpValveControledByHand = true; // 阀门保持手动，隔膜泵由关机闭环控制
if(sysPara->para.gearPumpEnable ){
if(!sysPara->para.flagOfReclaimPumEnable){
sysPara->para.gearPumpValue = 360;
sysPara->devOp->WriteMoterPump();
}
else{
if(sysPara->para.flagOfReclaimPumEnable)
sysPara->devOp->controlReclaimPump(true,false);
sysPara->para.gearPumpValue = 0;
sysPara->devOp->WriteMoterPump();
}
// 不再固定输出360，隔膜泵由pressureAdj按关机目标压力闭环调节
}
else{
sysPara->para.reclaimPumpPWMWidth = 95;
@@ -2298,7 +2299,10 @@ void MainWindow::checkForPowerOff(){
updateTotalCnt(0);
sysPara->saveParaToFile(); // 关机前将相关配置保存
}
// 退出关机压力维持阶段，后续关闭泵阀时禁止隔膜泵再次启动
sysPara->status.powerOffAppending = false;
sysPara->para.gearPumpValue = 0;
sysPara->devOp->WriteMoterPump();
if(!TEST_MODE){
for(int i=7;i>0;i--)
{
@@ -2317,7 +2321,8 @@ void MainWindow::checkForPowerOff(){
}
}
emit CloseJd();
sysPara->para.gearPumpValue=gearPumpValue_backup;
sysPara->para.gearPumpValue = 0;
sysPara->devOp->WriteMoterPump();
sysPara->para.reclaimPumpPWMWidth = reclaimPumpPWMWidth_backup;
sysPara->devOp->controlCompressPump(false);
setRunStatus(tr("准备关机......"));
@@ -4435,15 +4440,9 @@ void MainWindow::on_pushButton_Reboot_clicked()
sysPara->devOp->controlReclaimTankOpen(true);
sysPara->status.isPumpValveControledByHand = true; //停止自动
if(sysPara->para.gearPumpEnable ){
if(!sysPara->para.flagOfReclaimPumEnable){
sysPara->para.gearPumpValue = 360;
sysPara->devOp->WriteMoterPump();
}
else{
if(sysPara->para.flagOfReclaimPumEnable)
sysPara->devOp->controlReclaimPump(true,false);
sysPara->para.gearPumpValue = 0;
sysPara->devOp->WriteMoterPump();
}
// 不再固定输出360，由闭环控制维持压力
}
else{
sysPara->para.reclaimPumpPWMWidth = 95;
mainwindow.h
+1
View File
@@ -243,6 +243,7 @@ private:
bool printingFlag; //判断当前是否在打印
bool startPrintingFlag;
bool previewFlag;
bool m_powerOffInProgress = false; // 防止MySleep处理事件时重复进入关机流程
int searchExpiryVar(QString html = "");//检索有效期变量
void ExpiryDotUpdate(char Mode);
systemsetting.ui
+1062 -1062
View File
File diff suppressed because it is too large Load Diff