hlp:优化开机到排气期间界面状态显示；排气后，开回收槽前延时7秒等待压力升高，避免漏墨

InkJetPrinter.cpp

@@ -1629,9 +1629,14 @@ void InkJetPrinter::timerHandler(void){
                         m_bufValidCount = 0;
                     for(int i = 0; i < 10; i++) m_pressureBuf[i] = 0;
                     m_bufIdx = 0;
-                    LogInfo::setRunStatusText(tr("自检完成!!!"));
+
-                    ui->tabMainWindow->setRunStatus(tr("自检完成!!!"));
+                    if (check_flag) {
-                    qDebug()<<"自检完成!!!";
+                        LogInfo::setRunStatusText(tr("自检完成!!!"));
+                        ui->tabMainWindow->setRunStatus(tr("自检完成!!!"));
+                        qDebug()<<"自检完成!!!";
+                        check_flag = false;
+                    }
+
                     ui->tabPrintSetting->PrintSettingLog();
                     ui->tabMainWindow->enableReclaimCtrlButton(true);
                     sysPara->devOp->mainInkCtrl();
@@ -2704,9 +2709,10 @@ void InkJetPrinter::detectAndcontrolReclaimTank(){
         if(sysPara->devOp->isReclaimTankOpenEnable())
             sysPara->devOp->controlReclaimTankOpen(false);		//到头，关闭
         sysPara->status.reclainTankReachEnd = true;
-        /*应要求去掉多余到信息 LogInfo::setRunStatusText(tr("回收槽到头"));*/
+        if (sysPara->status.airPushingDone && sysPara->status.currReclaimTankPos != 0) {
-        if(sysPara->status.currReclaimTankPos != 0)
+            // 排气结束并放下回收槽以后才允许显示该信息
             ui->tabMainWindow->setRunStatus(tr("回收槽到头"));
+        }
             
         ui->tabMainWindow->enablePrintButton(true);			//仅仅在此时能使能打印按钮
         ui->tabMainWindow->resetReclaimCtrlButtonText();
@@ -2735,10 +2741,14 @@ void InkJetPrinter::detectAndcontrolReclaimTank(){
     }
     else  if(sysPara->status.reclaimTankstatus == 6 )//7 故障，6 关完成，5开完成，4 保持， 3 停止， 2 关， 1 开，0-无操作
     {
+        if (sysPara->status.airPushingDone) {
+            // 排气结束并放下回收槽以后才允许显示该信息
+            ui->tabMainWindow->setRunStatus(tr("回收槽到头"));
+        }
+
         if(sysPara->devOp->isReclaimTankCloseEnable())
             sysPara->devOp->controlReclaimTankClose(false);		//到头，关闭
-        /*应要求去掉多余到信息 LogInfo::setRunStatusText(tr("回收槽到头"));*/
+
-        ui->tabMainWindow->setRunStatus(tr("回收槽到头"));
         //sysPara->status.currReclaimTankPos = 0;				//将回收槽的时间置为零
         ui->tabMainWindow->resetReclaimCtrlButtonText();
         emit reclaimTankCloseDone();

InkJetPrinter.h

@@ -101,6 +101,8 @@ private:
     QTimer* viscosity_timer;
     QTimer* timer;
     QTime t1;
+    // 因为原先vx5没有状态管理，容易在刚开机时和排气中互相抢占显示
+    bool check_flag = true;
 
     // 隔膜泵状态枚举
     enum DiaphragmPumpState {

QtUI.pro

@@ -57,7 +57,7 @@ DEFINES+=WARNING
 
 DEFINES+=TEMPMIMA
 DEFINES+=COUNTER1_BY_GROUP #分段计米
-DEFINES+=COUNTER2_BY_GROUP #分段计米2
+#DEFINES+=COUNTER2_BY_GROUP #分段计米2
 DEFINES+=_2DCODE_ #QR二维码
 DEFINES+=PICSCENE
 #DEFINES+=__2451WIFI__

VerBVersion.h

@@ -8,7 +8,7 @@
 #define MACHINAE_VER "VX5"
 #define PUMP_VER "D"
 //#define SUB_VER "0100"
-#define SUB_VER "GuiLin"
+#define SUB_VER "IND"
 
 #ifdef __RFID_OLD
 #define SUB_RFID "_RO"

mainwindow.cpp

@@ -1704,13 +1704,7 @@ void MainWindow::generateCharRamData(){/* 生成字模数据  */
                     p_var->original = true;
                     p_var->currVal = -1;		//相当于初始化
                     ramAddress += rowByteNum * width2;
-                } else {
-                    qDebug() << "startRowPos:" << p_var->startRowPos
-                             <<" endRowPos:" << p_var->endRowPos
-                             <<" rowDiff:" << rowDiff
-                            << " 按原逻辑，执行这一步的时候软件就已经崩溃了";
                 }
-
             }
         }
     }
@@ -2053,7 +2047,6 @@ void MainWindow::airPushingProcess()
     if(sysPara){
         if (sysPara->status.airPushing) {
             setRunStatus(tr("正在排气 ..............."));
-            //qDebug()<< "start airPushingProcess "<<sysPara->status.airPushingOnTime;
             // 执行排气 4 秒
             sysPara->status.airPushingOnTime += 100;
 
@@ -2062,10 +2055,9 @@ void MainWindow::airPushingProcess()
                 sysPara->saveParaToFile();
             }
 
-            // 延迟 半秒后才开回收槽，正式结束排气阶段
+            // 延迟 7 秒后才开回收槽，正式结束排气阶段. reclaimTanOpen:会延迟半秒
-            if(sysPara->status.airPushingOnTime >= sysPara->para.airPushDurationSec * 1000 + 500){
+            if(sysPara->status.airPushingOnTime >= sysPara->para.airPushDurationSec * 1000 + 6500){
-                //qDebug()<< "start stop";
+                airPushTimer->stop();
-
                 setRunStatus(tr("排气结束, 打开回收槽."));
                 LogInfo::setRunStatusText(tr("排气结束, 打开回收槽."));
 
@@ -2073,8 +2065,6 @@ void MainWindow::airPushingProcess()
                 sysPara->status.airPushingDone = 1;
                 sysPara->status.airPushing = 0;
                 sysPara->status.airPushingOnTime = 0;
-                airPushTimer->stop();
-
                 return;
             }
 
@@ -2087,6 +2077,7 @@ void MainWindow::airPushingProcess()
 
                 setRunStatus(tr("排气结束, 准备打开回收槽."));
                 LogInfo::setRunStatusText(tr("排气结束, 准备打开回收槽."));
+                sysPara->status.isPumpValveControledByHand = false;
                 return;
             }
         }
@@ -2095,30 +2086,29 @@ void MainWindow::airPushingProcess()
 
 void MainWindow::reclaimTanOpen()
 {
-    // 还原当前模式
-    if (sysPara->status.airPushing) {
-        sysPara->status.isPumpValveControledByHand = sysPara->status.byHandStore;
-    }
     sysPara->status.isPumpValveControledByHand = false;
     sysPara->devOp->mainInkCtrl();
-    sysPara->devOp->controlReclaimTankClose(false);//开回收槽之前先让关回收槽停止
+    // 如果是排气流程，则不需要先收
-    MySleep(1000);
+    if (sysPara->status.airPushingDone)
-    sysPara->devOp->controlReclaimTankOpen(!sysPara->devOp->isReclaimTankOpenEnable());
+        sysPara->devOp->controlReclaimTankClose(false);//开回收槽之前先让关回收槽停止
-    ui->pushButtonReclaimTanOpen->setText(sysPara->devOp->isReclaimTankOpenEnable()?tr("停止"):tr("开"));
+    MySleep(500);
-    ui->pushButtonReclaimTankClose->setText(tr("关"));
+
-    enablePrintButton(SIMULATE_PRINTING_MODE);
-    sysPara->devOp->highVoltageCtrl(0);		/*回收槽动作的时候务必关高压*/
-    //    sysPara->status.reclaimTankstatus = 1;
-    setRunStatus(sysPara->devOp->isReclaimTankOpenEnable()?tr("正在打开回收槽..."):tr("停止打开"));
-    if (!sysPara->para.reclaimTankTime) {
-        LogInfo::setRunStatusText(tr("警告!回收槽开关时间未设置!"));
-    }
     sysPara->status.currReclaimOperationCnt = 0;
     sysPara->status.reclainTankReachEnd = false;
     sysPara->status.reclainOpenAppending = true;
     sysPara->status.reclainCloseAppending = false;
     sysPara->status.reclaimBlockedCnt = 0;
     sysPara->status.canRunAirPushing = false;
+    sysPara->devOp->controlReclaimTankOpen(!sysPara->devOp->isReclaimTankOpenEnable());
+    sysPara->devOp->highVoltageCtrl(0);		/*回收槽动作的时候务必关高压*/
+
+    ui->pushButtonReclaimTanOpen->setText(
+                sysPara->devOp->isReclaimTankOpenEnable()?tr("停止"):tr("开"));
+    ui->pushButtonReclaimTankClose->setText(tr("关"));
+    setRunStatus(sysPara->devOp->isReclaimTankOpenEnable()?tr("正在打开回收槽..."):tr("停止打开"));
+    if (!sysPara->para.reclaimTankTime) {
+        LogInfo::setRunStatusText(tr("警告!回收槽开关时间未设置!"));
+    }
 }
 
 void MainWindow::handleCode(int col, int row, int *varLastRow, int type)
@@ -2150,8 +2140,8 @@ void MainWindow::on_pushButtonReclaimTanOpen_pressed()
     if(sysPara){
         if (!sysPara->status.reclaimTankBlockedAppending) {
             if (sysPara->status.canRunAirPushing && (sysPara->status.currReclaimTankPos == 0)) { // 回收槽关闭的情况下才可以执行排气;//2019/10/24 当回收槽未在顶的位置，不需要排气
-                if (!sysPara->status.airPushing) { // 先执行排气后开回收槽
+                if (!sysPara->status.airPushing) {
-                    sysPara->status.byHandStore = sysPara->status.isPumpValveControledByHand;
+                    // 先执行排气后开回收槽
                     sysPara->status.isPumpValveControledByHand = true;
                     sysPara->devOp->mainInkCtrl();
                     sysPara->devOp->controlCycleValve(true);
@@ -2161,7 +2151,6 @@ void MainWindow::on_pushButtonReclaimTanOpen_pressed()
                     sysPara->devOp->controlReclaimPump(true, false); // 回收泵开
                     sysPara->devOp->controlInkValve(true); //墨水阀
                     sysPara->devOp->controlInkValvePWM(true); //墨水阀
-                    //qDebug()<< "start airpushings";
 
                     sysPara->status.airPushing = 1;
                     sysPara->status.airPushingDone = 0;

myinclude.h

@@ -12,8 +12,8 @@
 
 // #define FPGATEST        // 给韦工测试时启用，发布版本需要关闭
 // #define NETWORKQRCODE       //二维码允许tcp客户端修改
-// #define __RFID_OLD        //旧的加密算法
+ #define __RFID_OLD        //旧的加密算法
-// #define __RFID_CARD       //刷卡功能
+ #define __RFID_CARD       //刷卡功能
 // #define __RFID_IND        //允许印度进行二次加密的宏
 //#define EnableArabic      //界面语言切换为英文生效
 //#define EnableBangla      //新孟加拉语