hlp:桂林国际齿轮泵代码
This commit is contained in:
kite_lucs
@@ -0,0 +1,108 @@
|
||||
/*
|
||||
* FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU.
|
||||
* Copyright (c) 2006 Christian Walter <wolti@sil.at>
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. The name of the author may not be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
||||
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
||||
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
||||
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
||||
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
||||
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
||||
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
||||
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
* File: $Id: mbutils.h,v 1.5 2006/12/07 22:10:34 wolti Exp $
|
||||
*/
|
||||
|
||||
#ifndef _MB_UTILS_H
|
||||
#define _MB_UTILS_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
PR_BEGIN_EXTERN_C
|
||||
#endif
|
||||
/*! \defgroup modbus_utils Utilities
|
||||
*
|
||||
* This module contains some utility functions which can be used by
|
||||
* the application. It includes some special functions for working with
|
||||
* bitfields backed by a character array buffer.
|
||||
*
|
||||
*/
|
||||
/*! \addtogroup modbus_utils
|
||||
* @{
|
||||
*/
|
||||
/*! \brief Function to set bits in a byte buffer.
|
||||
*
|
||||
* This function allows the efficient use of an array to implement bitfields.
|
||||
* The array used for storing the bits must always be a multiple of two
|
||||
* bytes. Up to eight bits can be set or cleared in one operation.
|
||||
*
|
||||
* \param ucByteBuf A buffer where the bit values are stored. Must be a
|
||||
* multiple of 2 bytes. No length checking is performed and if
|
||||
* usBitOffset / 8 is greater than the size of the buffer memory contents
|
||||
* is overwritten.
|
||||
* \param usBitOffset The starting address of the bits to set. The first
|
||||
* bit has the offset 0.
|
||||
* \param ucNBits Number of bits to modify. The value must always be smaller
|
||||
* than 8.
|
||||
* \param ucValues Thew new values for the bits. The value for the first bit
|
||||
* starting at <code>usBitOffset</code> is the LSB of the value
|
||||
* <code>ucValues</code>
|
||||
*
|
||||
* \code
|
||||
* ucBits[2] = {0, 0};
|
||||
*
|
||||
* // Set bit 4 to 1 (read: set 1 bit starting at bit offset 4 to value 1)
|
||||
* xMBUtilSetBits( ucBits, 4, 1, 1 );
|
||||
*
|
||||
* // Set bit 7 to 1 and bit 8 to 0.
|
||||
* xMBUtilSetBits( ucBits, 7, 2, 0x01 );
|
||||
*
|
||||
* // Set bits 8 - 11 to 0x05 and bits 12 - 15 to 0x0A;
|
||||
* xMBUtilSetBits( ucBits, 8, 8, 0x5A);
|
||||
* \endcode
|
||||
*/
|
||||
void xMBUtilSetBits( UCHAR * ucByteBuf, USHORT usBitOffset,
|
||||
UCHAR ucNBits, UCHAR ucValues );
|
||||
|
||||
/*! \brief Function to read bits in a byte buffer.
|
||||
*
|
||||
* This function is used to extract up bit values from an array. Up to eight
|
||||
* bit values can be extracted in one step.
|
||||
*
|
||||
* \param ucByteBuf A buffer where the bit values are stored.
|
||||
* \param usBitOffset The starting address of the bits to set. The first
|
||||
* bit has the offset 0.
|
||||
* \param ucNBits Number of bits to modify. The value must always be smaller
|
||||
* than 8.
|
||||
*
|
||||
* \code
|
||||
* UCHAR ucBits[2] = {0, 0};
|
||||
* UCHAR ucResult;
|
||||
*
|
||||
* // Extract the bits 3 - 10.
|
||||
* ucResult = xMBUtilGetBits( ucBits, 3, 8 );
|
||||
* \endcode
|
||||
*/
|
||||
UCHAR xMBUtilGetBits( UCHAR * ucByteBuf, USHORT usBitOffset,
|
||||
UCHAR ucNBits );
|
||||
|
||||
/*! @} */
|
||||
|
||||
#ifdef __cplusplus
|
||||
PR_END_EXTERN_C
|
||||
#endif
|
||||
#endif
|
||||
@@ -0,0 +1,315 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!DOCTYPE QtCreatorProject>
|
||||
<!-- Written by QtCreator 4.4.1, 2019-11-16T23:07:01. -->
|
||||
<qtcreator>
|
||||
<data>
|
||||
<variable>EnvironmentId</variable>
|
||||
<value type="QByteArray">{99f767af-d38c-4cfd-943a-622f8a927964}</value>
|
||||
</data>
|
||||
<data>
|
||||
<variable>ProjectExplorer.Project.ActiveTarget</variable>
|
||||
<value type="int">0</value>
|
||||
</data>
|
||||
<data>
|
||||
<variable>ProjectExplorer.Project.EditorSettings</variable>
|
||||
<valuemap type="QVariantMap">
|
||||
<value type="bool" key="EditorConfiguration.AutoIndent">true</value>
|
||||
<value type="bool" key="EditorConfiguration.AutoSpacesForTabs">false</value>
|
||||
<value type="bool" key="EditorConfiguration.CamelCaseNavigation">true</value>
|
||||
<valuemap type="QVariantMap" key="EditorConfiguration.CodeStyle.0">
|
||||
<value type="QString" key="language">Cpp</value>
|
||||
<valuemap type="QVariantMap" key="value">
|
||||
<value type="QByteArray" key="CurrentPreferences">CppGlobal</value>
|
||||
</valuemap>
|
||||
</valuemap>
|
||||
<valuemap type="QVariantMap" key="EditorConfiguration.CodeStyle.1">
|
||||
<value type="QString" key="language">QmlJS</value>
|
||||
<valuemap type="QVariantMap" key="value">
|
||||
<value type="QByteArray" key="CurrentPreferences">QmlJSGlobal</value>
|
||||
</valuemap>
|
||||
</valuemap>
|
||||
<value type="int" key="EditorConfiguration.CodeStyle.Count">2</value>
|
||||
<value type="QByteArray" key="EditorConfiguration.Codec">UTF-8</value>
|
||||
<value type="bool" key="EditorConfiguration.ConstrainTooltips">false</value>
|
||||
<value type="int" key="EditorConfiguration.IndentSize">4</value>
|
||||
<value type="bool" key="EditorConfiguration.KeyboardTooltips">false</value>
|
||||
<value type="int" key="EditorConfiguration.MarginColumn">80</value>
|
||||
<value type="bool" key="EditorConfiguration.MouseHiding">true</value>
|
||||
<value type="bool" key="EditorConfiguration.MouseNavigation">true</value>
|
||||
<value type="int" key="EditorConfiguration.PaddingMode">1</value>
|
||||
<value type="bool" key="EditorConfiguration.ScrollWheelZooming">true</value>
|
||||
<value type="bool" key="EditorConfiguration.ShowMargin">false</value>
|
||||
<value type="int" key="EditorConfiguration.SmartBackspaceBehavior">0</value>
|
||||
<value type="bool" key="EditorConfiguration.SmartSelectionChanging">true</value>
|
||||
<value type="bool" key="EditorConfiguration.SpacesForTabs">true</value>
|
||||
<value type="int" key="EditorConfiguration.TabKeyBehavior">0</value>
|
||||
<value type="int" key="EditorConfiguration.TabSize">8</value>
|
||||
<value type="bool" key="EditorConfiguration.UseGlobal">true</value>
|
||||
<value type="int" key="EditorConfiguration.Utf8BomBehavior">1</value>
|
||||
<value type="bool" key="EditorConfiguration.addFinalNewLine">true</value>
|
||||
<value type="bool" key="EditorConfiguration.cleanIndentation">true</value>
|
||||
<value type="bool" key="EditorConfiguration.cleanWhitespace">true</value>
|
||||
<value type="bool" key="EditorConfiguration.inEntireDocument">false</value>
|
||||
</valuemap>
|
||||
</data>
|
||||
<data>
|
||||
<variable>ProjectExplorer.Project.PluginSettings</variable>
|
||||
<valuemap type="QVariantMap"/>
|
||||
</data>
|
||||
<data>
|
||||
<variable>ProjectExplorer.Project.Target.0</variable>
|
||||
<valuemap type="QVariantMap">
|
||||
<value type="QString" key="ProjectExplorer.ProjectConfiguration.DefaultDisplayName">Desktop Qt 5.9.2 MSVC2013 64bit</value>
|
||||
<value type="QString" key="ProjectExplorer.ProjectConfiguration.DisplayName">Desktop Qt 5.9.2 MSVC2013 64bit</value>
|
||||
<value type="QString" key="ProjectExplorer.ProjectConfiguration.Id">qt.592.win64_msvc2013_64_kit</value>
|
||||
<value type="int" key="ProjectExplorer.Target.ActiveBuildConfiguration">0</value>
|
||||
<value type="int" key="ProjectExplorer.Target.ActiveDeployConfiguration">0</value>
|
||||
<value type="int" key="ProjectExplorer.Target.ActiveRunConfiguration">0</value>
|
||||
<valuemap type="QVariantMap" key="ProjectExplorer.Target.BuildConfiguration.0">
|
||||
<value type="QString" key="ProjectExplorer.BuildConfiguration.BuildDirectory">X:/sideline_work/QTUI_dir/build-QtUI-Desktop_Qt_5_9_2_MSVC2013_64bit-Debug</value>
|
||||
<valuemap type="QVariantMap" key="ProjectExplorer.BuildConfiguration.BuildStepList.0">
|
||||
<valuemap type="QVariantMap" key="ProjectExplorer.BuildStepList.Step.0">
|
||||
<value type="bool" key="ProjectExplorer.BuildStep.Enabled">true</value>
|
||||
<value type="QString" key="ProjectExplorer.ProjectConfiguration.DefaultDisplayName">qmake</value>
|
||||
<value type="QString" key="ProjectExplorer.ProjectConfiguration.DisplayName"></value>
|
||||
<value type="QString" key="ProjectExplorer.ProjectConfiguration.Id">QtProjectManager.QMakeBuildStep</value>
|
||||
<value type="bool" key="QtProjectManager.QMakeBuildStep.LinkQmlDebuggingLibrary">true</value>
|
||||
<value type="QString" key="QtProjectManager.QMakeBuildStep.QMakeArguments"></value>
|
||||
<value type="bool" key="QtProjectManager.QMakeBuildStep.QMakeForced">false</value>
|
||||
<value type="bool" key="QtProjectManager.QMakeBuildStep.SeparateDebugInfo">false</value>
|
||||
<value type="bool" key="QtProjectManager.QMakeBuildStep.UseQtQuickCompiler">false</value>
|
||||
</valuemap>
|
||||
<valuemap type="QVariantMap" key="ProjectExplorer.BuildStepList.Step.1">
|
||||
<value type="bool" key="ProjectExplorer.BuildStep.Enabled">true</value>
|
||||
<value type="QString" key="ProjectExplorer.ProjectConfiguration.DefaultDisplayName">Make</value>
|
||||
<value type="QString" key="ProjectExplorer.ProjectConfiguration.DisplayName"></value>
|
||||
<value type="QString" key="ProjectExplorer.ProjectConfiguration.Id">Qt4ProjectManager.MakeStep</value>
|
||||
<valuelist type="QVariantList" key="Qt4ProjectManager.MakeStep.AutomaticallyAddedMakeArguments"/>
|
||||
<value type="bool" key="Qt4ProjectManager.MakeStep.Clean">false</value>
|
||||
<value type="QString" key="Qt4ProjectManager.MakeStep.MakeArguments"></value>
|
||||
<value type="QString" key="Qt4ProjectManager.MakeStep.MakeCommand"></value>
|
||||
</valuemap>
|
||||
<value type="int" key="ProjectExplorer.BuildStepList.StepsCount">2</value>
|
||||
<value type="QString" key="ProjectExplorer.ProjectConfiguration.DefaultDisplayName">构建</value>
|
||||
<value type="QString" key="ProjectExplorer.ProjectConfiguration.DisplayName"></value>
|
||||
<value type="QString" key="ProjectExplorer.ProjectConfiguration.Id">ProjectExplorer.BuildSteps.Build</value>
|
||||
</valuemap>
|
||||
<valuemap type="QVariantMap" key="ProjectExplorer.BuildConfiguration.BuildStepList.1">
|
||||
<valuemap type="QVariantMap" key="ProjectExplorer.BuildStepList.Step.0">
|
||||
<value type="bool" key="ProjectExplorer.BuildStep.Enabled">true</value>
|
||||
<value type="QString" key="ProjectExplorer.ProjectConfiguration.DefaultDisplayName">Make</value>
|
||||
<value type="QString" key="ProjectExplorer.ProjectConfiguration.DisplayName"></value>
|
||||
<value type="QString" key="ProjectExplorer.ProjectConfiguration.Id">Qt4ProjectManager.MakeStep</value>
|
||||
<valuelist type="QVariantList" key="Qt4ProjectManager.MakeStep.AutomaticallyAddedMakeArguments"/>
|
||||
<value type="bool" key="Qt4ProjectManager.MakeStep.Clean">true</value>
|
||||
<value type="QString" key="Qt4ProjectManager.MakeStep.MakeArguments">clean</value>
|
||||
<value type="QString" key="Qt4ProjectManager.MakeStep.MakeCommand"></value>
|
||||
</valuemap>
|
||||
<value type="int" key="ProjectExplorer.BuildStepList.StepsCount">1</value>
|
||||
<value type="QString" key="ProjectExplorer.ProjectConfiguration.DefaultDisplayName">清理</value>
|
||||
<value type="QString" key="ProjectExplorer.ProjectConfiguration.DisplayName"></value>
|
||||
<value type="QString" key="ProjectExplorer.ProjectConfiguration.Id">ProjectExplorer.BuildSteps.Clean</value>
|
||||
</valuemap>
|
||||
<value type="int" key="ProjectExplorer.BuildConfiguration.BuildStepListCount">2</value>
|
||||
<value type="bool" key="ProjectExplorer.BuildConfiguration.ClearSystemEnvironment">false</value>
|
||||
<valuelist type="QVariantList" key="ProjectExplorer.BuildConfiguration.UserEnvironmentChanges"/>
|
||||
<value type="QString" key="ProjectExplorer.ProjectConfiguration.DefaultDisplayName">Debug</value>
|
||||
<value type="QString" key="ProjectExplorer.ProjectConfiguration.DisplayName"></value>
|
||||
<value type="QString" key="ProjectExplorer.ProjectConfiguration.Id">Qt4ProjectManager.Qt4BuildConfiguration</value>
|
||||
<value type="int" key="Qt4ProjectManager.Qt4BuildConfiguration.BuildConfiguration">2</value>
|
||||
<value type="bool" key="Qt4ProjectManager.Qt4BuildConfiguration.UseShadowBuild">true</value>
|
||||
</valuemap>
|
||||
<valuemap type="QVariantMap" key="ProjectExplorer.Target.BuildConfiguration.1">
|
||||
<value type="QString" key="ProjectExplorer.BuildConfiguration.BuildDirectory">X:/sideline_work/QTUI_dir/build-QtUI-Desktop_Qt_5_9_2_MSVC2013_64bit-Release</value>
|
||||
<valuemap type="QVariantMap" key="ProjectExplorer.BuildConfiguration.BuildStepList.0">
|
||||
<valuemap type="QVariantMap" key="ProjectExplorer.BuildStepList.Step.0">
|
||||
<value type="bool" key="ProjectExplorer.BuildStep.Enabled">true</value>
|
||||
<value type="QString" key="ProjectExplorer.ProjectConfiguration.DefaultDisplayName">qmake</value>
|
||||
<value type="QString" key="ProjectExplorer.ProjectConfiguration.DisplayName"></value>
|
||||
<value type="QString" key="ProjectExplorer.ProjectConfiguration.Id">QtProjectManager.QMakeBuildStep</value>
|
||||
<value type="bool" key="QtProjectManager.QMakeBuildStep.LinkQmlDebuggingLibrary">false</value>
|
||||
<value type="QString" key="QtProjectManager.QMakeBuildStep.QMakeArguments"></value>
|
||||
<value type="bool" key="QtProjectManager.QMakeBuildStep.QMakeForced">false</value>
|
||||
<value type="bool" key="QtProjectManager.QMakeBuildStep.SeparateDebugInfo">false</value>
|
||||
<value type="bool" key="QtProjectManager.QMakeBuildStep.UseQtQuickCompiler">false</value>
|
||||
</valuemap>
|
||||
<valuemap type="QVariantMap" key="ProjectExplorer.BuildStepList.Step.1">
|
||||
<value type="bool" key="ProjectExplorer.BuildStep.Enabled">true</value>
|
||||
<value type="QString" key="ProjectExplorer.ProjectConfiguration.DefaultDisplayName">Make</value>
|
||||
<value type="QString" key="ProjectExplorer.ProjectConfiguration.DisplayName"></value>
|
||||
<value type="QString" key="ProjectExplorer.ProjectConfiguration.Id">Qt4ProjectManager.MakeStep</value>
|
||||
<valuelist type="QVariantList" key="Qt4ProjectManager.MakeStep.AutomaticallyAddedMakeArguments"/>
|
||||
<value type="bool" key="Qt4ProjectManager.MakeStep.Clean">false</value>
|
||||
<value type="QString" key="Qt4ProjectManager.MakeStep.MakeArguments"></value>
|
||||
<value type="QString" key="Qt4ProjectManager.MakeStep.MakeCommand"></value>
|
||||
</valuemap>
|
||||
<value type="int" key="ProjectExplorer.BuildStepList.StepsCount">2</value>
|
||||
<value type="QString" key="ProjectExplorer.ProjectConfiguration.DefaultDisplayName">构建</value>
|
||||
<value type="QString" key="ProjectExplorer.ProjectConfiguration.DisplayName"></value>
|
||||
<value type="QString" key="ProjectExplorer.ProjectConfiguration.Id">ProjectExplorer.BuildSteps.Build</value>
|
||||
</valuemap>
|
||||
<valuemap type="QVariantMap" key="ProjectExplorer.BuildConfiguration.BuildStepList.1">
|
||||
<valuemap type="QVariantMap" key="ProjectExplorer.BuildStepList.Step.0">
|
||||
<value type="bool" key="ProjectExplorer.BuildStep.Enabled">true</value>
|
||||
<value type="QString" key="ProjectExplorer.ProjectConfiguration.DefaultDisplayName">Make</value>
|
||||
<value type="QString" key="ProjectExplorer.ProjectConfiguration.DisplayName"></value>
|
||||
<value type="QString" key="ProjectExplorer.ProjectConfiguration.Id">Qt4ProjectManager.MakeStep</value>
|
||||
<valuelist type="QVariantList" key="Qt4ProjectManager.MakeStep.AutomaticallyAddedMakeArguments"/>
|
||||
<value type="bool" key="Qt4ProjectManager.MakeStep.Clean">true</value>
|
||||
<value type="QString" key="Qt4ProjectManager.MakeStep.MakeArguments">clean</value>
|
||||
<value type="QString" key="Qt4ProjectManager.MakeStep.MakeCommand"></value>
|
||||
</valuemap>
|
||||
<value type="int" key="ProjectExplorer.BuildStepList.StepsCount">1</value>
|
||||
<value type="QString" key="ProjectExplorer.ProjectConfiguration.DefaultDisplayName">清理</value>
|
||||
<value type="QString" key="ProjectExplorer.ProjectConfiguration.DisplayName"></value>
|
||||
<value type="QString" key="ProjectExplorer.ProjectConfiguration.Id">ProjectExplorer.BuildSteps.Clean</value>
|
||||
</valuemap>
|
||||
<value type="int" key="ProjectExplorer.BuildConfiguration.BuildStepListCount">2</value>
|
||||
<value type="bool" key="ProjectExplorer.BuildConfiguration.ClearSystemEnvironment">false</value>
|
||||
<valuelist type="QVariantList" key="ProjectExplorer.BuildConfiguration.UserEnvironmentChanges"/>
|
||||
<value type="QString" key="ProjectExplorer.ProjectConfiguration.DefaultDisplayName">Release</value>
|
||||
<value type="QString" key="ProjectExplorer.ProjectConfiguration.DisplayName"></value>
|
||||
<value type="QString" key="ProjectExplorer.ProjectConfiguration.Id">Qt4ProjectManager.Qt4BuildConfiguration</value>
|
||||
<value type="int" key="Qt4ProjectManager.Qt4BuildConfiguration.BuildConfiguration">0</value>
|
||||
<value type="bool" key="Qt4ProjectManager.Qt4BuildConfiguration.UseShadowBuild">true</value>
|
||||
</valuemap>
|
||||
<valuemap type="QVariantMap" key="ProjectExplorer.Target.BuildConfiguration.2">
|
||||
<value type="QString" key="ProjectExplorer.BuildConfiguration.BuildDirectory">X:/sideline_work/QTUI_dir/build-QtUI-Desktop_Qt_5_9_2_MSVC2013_64bit-Profile</value>
|
||||
<valuemap type="QVariantMap" key="ProjectExplorer.BuildConfiguration.BuildStepList.0">
|
||||
<valuemap type="QVariantMap" key="ProjectExplorer.BuildStepList.Step.0">
|
||||
<value type="bool" key="ProjectExplorer.BuildStep.Enabled">true</value>
|
||||
<value type="QString" key="ProjectExplorer.ProjectConfiguration.DefaultDisplayName">qmake</value>
|
||||
<value type="QString" key="ProjectExplorer.ProjectConfiguration.DisplayName"></value>
|
||||
<value type="QString" key="ProjectExplorer.ProjectConfiguration.Id">QtProjectManager.QMakeBuildStep</value>
|
||||
<value type="bool" key="QtProjectManager.QMakeBuildStep.LinkQmlDebuggingLibrary">true</value>
|
||||
<value type="QString" key="QtProjectManager.QMakeBuildStep.QMakeArguments"></value>
|
||||
<value type="bool" key="QtProjectManager.QMakeBuildStep.QMakeForced">false</value>
|
||||
<value type="bool" key="QtProjectManager.QMakeBuildStep.SeparateDebugInfo">true</value>
|
||||
<value type="bool" key="QtProjectManager.QMakeBuildStep.UseQtQuickCompiler">false</value>
|
||||
</valuemap>
|
||||
<valuemap type="QVariantMap" key="ProjectExplorer.BuildStepList.Step.1">
|
||||
<value type="bool" key="ProjectExplorer.BuildStep.Enabled">true</value>
|
||||
<value type="QString" key="ProjectExplorer.ProjectConfiguration.DefaultDisplayName">Make</value>
|
||||
<value type="QString" key="ProjectExplorer.ProjectConfiguration.DisplayName"></value>
|
||||
<value type="QString" key="ProjectExplorer.ProjectConfiguration.Id">Qt4ProjectManager.MakeStep</value>
|
||||
<valuelist type="QVariantList" key="Qt4ProjectManager.MakeStep.AutomaticallyAddedMakeArguments"/>
|
||||
<value type="bool" key="Qt4ProjectManager.MakeStep.Clean">false</value>
|
||||
<value type="QString" key="Qt4ProjectManager.MakeStep.MakeArguments"></value>
|
||||
<value type="QString" key="Qt4ProjectManager.MakeStep.MakeCommand"></value>
|
||||
</valuemap>
|
||||
<value type="int" key="ProjectExplorer.BuildStepList.StepsCount">2</value>
|
||||
<value type="QString" key="ProjectExplorer.ProjectConfiguration.DefaultDisplayName">构建</value>
|
||||
<value type="QString" key="ProjectExplorer.ProjectConfiguration.DisplayName"></value>
|
||||
<value type="QString" key="ProjectExplorer.ProjectConfiguration.Id">ProjectExplorer.BuildSteps.Build</value>
|
||||
</valuemap>
|
||||
<valuemap type="QVariantMap" key="ProjectExplorer.BuildConfiguration.BuildStepList.1">
|
||||
<valuemap type="QVariantMap" key="ProjectExplorer.BuildStepList.Step.0">
|
||||
<value type="bool" key="ProjectExplorer.BuildStep.Enabled">true</value>
|
||||
<value type="QString" key="ProjectExplorer.ProjectConfiguration.DefaultDisplayName">Make</value>
|
||||
<value type="QString" key="ProjectExplorer.ProjectConfiguration.DisplayName"></value>
|
||||
<value type="QString" key="ProjectExplorer.ProjectConfiguration.Id">Qt4ProjectManager.MakeStep</value>
|
||||
<valuelist type="QVariantList" key="Qt4ProjectManager.MakeStep.AutomaticallyAddedMakeArguments"/>
|
||||
<value type="bool" key="Qt4ProjectManager.MakeStep.Clean">true</value>
|
||||
<value type="QString" key="Qt4ProjectManager.MakeStep.MakeArguments">clean</value>
|
||||
<value type="QString" key="Qt4ProjectManager.MakeStep.MakeCommand"></value>
|
||||
</valuemap>
|
||||
<value type="int" key="ProjectExplorer.BuildStepList.StepsCount">1</value>
|
||||
<value type="QString" key="ProjectExplorer.ProjectConfiguration.DefaultDisplayName">清理</value>
|
||||
<value type="QString" key="ProjectExplorer.ProjectConfiguration.DisplayName"></value>
|
||||
<value type="QString" key="ProjectExplorer.ProjectConfiguration.Id">ProjectExplorer.BuildSteps.Clean</value>
|
||||
</valuemap>
|
||||
<value type="int" key="ProjectExplorer.BuildConfiguration.BuildStepListCount">2</value>
|
||||
<value type="bool" key="ProjectExplorer.BuildConfiguration.ClearSystemEnvironment">false</value>
|
||||
<valuelist type="QVariantList" key="ProjectExplorer.BuildConfiguration.UserEnvironmentChanges"/>
|
||||
<value type="QString" key="ProjectExplorer.ProjectConfiguration.DefaultDisplayName">Profile</value>
|
||||
<value type="QString" key="ProjectExplorer.ProjectConfiguration.DisplayName"></value>
|
||||
<value type="QString" key="ProjectExplorer.ProjectConfiguration.Id">Qt4ProjectManager.Qt4BuildConfiguration</value>
|
||||
<value type="int" key="Qt4ProjectManager.Qt4BuildConfiguration.BuildConfiguration">0</value>
|
||||
<value type="bool" key="Qt4ProjectManager.Qt4BuildConfiguration.UseShadowBuild">true</value>
|
||||
</valuemap>
|
||||
<value type="int" key="ProjectExplorer.Target.BuildConfigurationCount">3</value>
|
||||
<valuemap type="QVariantMap" key="ProjectExplorer.Target.DeployConfiguration.0">
|
||||
<valuemap type="QVariantMap" key="ProjectExplorer.BuildConfiguration.BuildStepList.0">
|
||||
<value type="int" key="ProjectExplorer.BuildStepList.StepsCount">0</value>
|
||||
<value type="QString" key="ProjectExplorer.ProjectConfiguration.DefaultDisplayName">部署</value>
|
||||
<value type="QString" key="ProjectExplorer.ProjectConfiguration.DisplayName"></value>
|
||||
<value type="QString" key="ProjectExplorer.ProjectConfiguration.Id">ProjectExplorer.BuildSteps.Deploy</value>
|
||||
</valuemap>
|
||||
<value type="int" key="ProjectExplorer.BuildConfiguration.BuildStepListCount">1</value>
|
||||
<value type="QString" key="ProjectExplorer.ProjectConfiguration.DefaultDisplayName">在本地部署</value>
|
||||
<value type="QString" key="ProjectExplorer.ProjectConfiguration.DisplayName"></value>
|
||||
<value type="QString" key="ProjectExplorer.ProjectConfiguration.Id">ProjectExplorer.DefaultDeployConfiguration</value>
|
||||
</valuemap>
|
||||
<value type="int" key="ProjectExplorer.Target.DeployConfigurationCount">1</value>
|
||||
<valuemap type="QVariantMap" key="ProjectExplorer.Target.PluginSettings"/>
|
||||
<valuemap type="QVariantMap" key="ProjectExplorer.Target.RunConfiguration.0">
|
||||
<value type="bool" key="Analyzer.QmlProfiler.AggregateTraces">false</value>
|
||||
<value type="bool" key="Analyzer.QmlProfiler.FlushEnabled">false</value>
|
||||
<value type="uint" key="Analyzer.QmlProfiler.FlushInterval">1000</value>
|
||||
<value type="QString" key="Analyzer.QmlProfiler.LastTraceFile"></value>
|
||||
<value type="bool" key="Analyzer.QmlProfiler.Settings.UseGlobalSettings">true</value>
|
||||
<valuelist type="QVariantList" key="Analyzer.Valgrind.AddedSuppressionFiles"/>
|
||||
<value type="bool" key="Analyzer.Valgrind.Callgrind.CollectBusEvents">false</value>
|
||||
<value type="bool" key="Analyzer.Valgrind.Callgrind.CollectSystime">false</value>
|
||||
<value type="bool" key="Analyzer.Valgrind.Callgrind.EnableBranchSim">false</value>
|
||||
<value type="bool" key="Analyzer.Valgrind.Callgrind.EnableCacheSim">false</value>
|
||||
<value type="bool" key="Analyzer.Valgrind.Callgrind.EnableEventToolTips">true</value>
|
||||
<value type="double" key="Analyzer.Valgrind.Callgrind.MinimumCostRatio">0.01</value>
|
||||
<value type="double" key="Analyzer.Valgrind.Callgrind.VisualisationMinimumCostRatio">10</value>
|
||||
<value type="bool" key="Analyzer.Valgrind.FilterExternalIssues">true</value>
|
||||
<value type="int" key="Analyzer.Valgrind.LeakCheckOnFinish">1</value>
|
||||
<value type="int" key="Analyzer.Valgrind.NumCallers">25</value>
|
||||
<valuelist type="QVariantList" key="Analyzer.Valgrind.RemovedSuppressionFiles"/>
|
||||
<value type="int" key="Analyzer.Valgrind.SelfModifyingCodeDetection">1</value>
|
||||
<value type="bool" key="Analyzer.Valgrind.Settings.UseGlobalSettings">true</value>
|
||||
<value type="bool" key="Analyzer.Valgrind.ShowReachable">false</value>
|
||||
<value type="bool" key="Analyzer.Valgrind.TrackOrigins">true</value>
|
||||
<value type="QString" key="Analyzer.Valgrind.ValgrindExecutable">valgrind</value>
|
||||
<valuelist type="QVariantList" key="Analyzer.Valgrind.VisibleErrorKinds">
|
||||
<value type="int">0</value>
|
||||
<value type="int">1</value>
|
||||
<value type="int">2</value>
|
||||
<value type="int">3</value>
|
||||
<value type="int">4</value>
|
||||
<value type="int">5</value>
|
||||
<value type="int">6</value>
|
||||
<value type="int">7</value>
|
||||
<value type="int">8</value>
|
||||
<value type="int">9</value>
|
||||
<value type="int">10</value>
|
||||
<value type="int">11</value>
|
||||
<value type="int">12</value>
|
||||
<value type="int">13</value>
|
||||
<value type="int">14</value>
|
||||
</valuelist>
|
||||
<value type="int" key="PE.EnvironmentAspect.Base">2</value>
|
||||
<valuelist type="QVariantList" key="PE.EnvironmentAspect.Changes"/>
|
||||
<value type="QString" key="ProjectExplorer.CustomExecutableRunConfiguration.Arguments"></value>
|
||||
<value type="QString" key="ProjectExplorer.CustomExecutableRunConfiguration.Executable"></value>
|
||||
<value type="QString" key="ProjectExplorer.CustomExecutableRunConfiguration.WorkingDirectory">%{buildDir}</value>
|
||||
<value type="QString" key="ProjectExplorer.ProjectConfiguration.DefaultDisplayName">Custom Executable</value>
|
||||
<value type="QString" key="ProjectExplorer.ProjectConfiguration.DisplayName"></value>
|
||||
<value type="QString" key="ProjectExplorer.ProjectConfiguration.Id">ProjectExplorer.CustomExecutableRunConfiguration</value>
|
||||
<value type="uint" key="RunConfiguration.QmlDebugServerPort">3768</value>
|
||||
<value type="bool" key="RunConfiguration.UseCppDebugger">false</value>
|
||||
<value type="bool" key="RunConfiguration.UseCppDebuggerAuto">true</value>
|
||||
<value type="bool" key="RunConfiguration.UseMultiProcess">false</value>
|
||||
<value type="bool" key="RunConfiguration.UseQmlDebugger">false</value>
|
||||
<value type="bool" key="RunConfiguration.UseQmlDebuggerAuto">true</value>
|
||||
</valuemap>
|
||||
<value type="int" key="ProjectExplorer.Target.RunConfigurationCount">1</value>
|
||||
</valuemap>
|
||||
</data>
|
||||
<data>
|
||||
<variable>ProjectExplorer.Project.TargetCount</variable>
|
||||
<value type="int">1</value>
|
||||
</data>
|
||||
<data>
|
||||
<variable>ProjectExplorer.Project.Updater.FileVersion</variable>
|
||||
<value type="int">18</value>
|
||||
</data>
|
||||
<data>
|
||||
<variable>Version</variable>
|
||||
<value type="int">18</value>
|
||||
</data>
|
||||
</qtcreator>
|
||||
Binary file not shown.
|
After Width: | Height: | Size: 2.9 KiB |
Reference in New Issue
Block a user