hlp:桂林国际齿轮泵代码

2026-10-09 10:25:24 +08:00
commit fd606b3c81
2447 changed files with 999531 additions and 0 deletions
@@ -0,0 +1,47 @@
+#ifndef RSCODE_H
+#define RSCODE_H
+
+/*
+ * qrencode - QR Code encoder
+ *
+ * Reed solomon encoder. This code is taken from Phil Karn's libfec then
+ * editted and packed into a pair of .c and .h files.
+ *
+ * Copyright (C) 2002, 2003, 2004, 2006 Phil Karn, KA9Q
+ * (libfec is released under the GNU Lesser General Public License.)
+ *
+ * Copyright (C) 2006,2007 Kentaro Fukuchi <fukuchi@megaui.net>
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef __RSCODE_H__
+#define __RSCODE_H__
+
+/*
+ * General purpose RS codec, 8-bit symbols.
+ */
+
+typedef struct _RS RS;
+
+/* WARNING: Thread unsafe!!! */
+extern RS *init_rs(int symsize, int gfpoly, int fcr, int prim, int nroots, int pad);
+extern void encode_rs_char(RS *rs, const unsigned char *data, unsigned char *parity);
+extern void free_rs_char(RS *rs);
+
+#endif /* __RSCODE_H__ */
+
+
+#endif // RSCODE_H
@@ -0,0 +1,170 @@
+/********************************************************************************
+** Form generated from reading UI file 'dlgvarlength.ui'
+**
+** Created by: Qt User Interface Compiler version 4.8.5
+**
+** WARNING! All changes made in this file will be lost when recompiling UI file!
+********************************************************************************/
+
+#ifndef UI_DLGVARLENGTH_H
+#define UI_DLGVARLENGTH_H
+
+#include <QtCore/QVariant>
+#include <QtGui/QAction>
+#include <QtGui/QApplication>
+#include <QtGui/QButtonGroup>
+#include <QtGui/QCheckBox>
+#include <QtGui/QDialog>
+#include <QtGui/QGridLayout>
+#include <QtGui/QHeaderView>
+#include <QtGui/QLabel>
+#include <QtGui/QLineEdit>
+#include <QtGui/QPushButton>
+#include <QtGui/QSpinBox>
+
+QT_BEGIN_NAMESPACE
+
+class Ui_DlgVarLength
+{
+public:
+    QGridLayout *gridLayout_2;
+    QGridLayout *gridLayout;
+    QLabel *label_2;
+    QLabel *label;
+    QLabel *label_4;
+    QSpinBox *spinHeadLen;
+    QSpinBox *spinEndLen;
+    QLineEdit *lineEditAllLen;
+    QLabel *label_3;
+    QSpinBox *spinVarLen;
+    QLabel *label_5;
+    QSpinBox *spinVarLen1;
+    QCheckBox *checkVarEN;
+    QPushButton *pushButtonOK;
+
+    void setupUi(QDialog *DlgVarLength)
+    {
+        if (DlgVarLength->objectName().isEmpty())
+            DlgVarLength->setObjectName(QString::fromUtf8("DlgVarLength"));
+        DlgVarLength->setWindowModality(Qt::WindowModal);
+        DlgVarLength->resize(386, 166);
+        DlgVarLength->setFocusPolicy(Qt::StrongFocus);
+        gridLayout_2 = new QGridLayout(DlgVarLength);
+        gridLayout_2->setObjectName(QString::fromUtf8("gridLayout_2"));
+        gridLayout = new QGridLayout();
+        gridLayout->setObjectName(QString::fromUtf8("gridLayout"));
+        label_2 = new QLabel(DlgVarLength);
+        label_2->setObjectName(QString::fromUtf8("label_2"));
+        label_2->setMaximumSize(QSize(100, 16777215));
+        label_2->setAlignment(Qt::AlignRight|Qt::AlignTrailing|Qt::AlignVCenter);
+
+        gridLayout->addWidget(label_2, 0, 0, 1, 1);
+
+        label = new QLabel(DlgVarLength);
+        label->setObjectName(QString::fromUtf8("label"));
+        label->setMaximumSize(QSize(100, 16777215));
+        label->setAlignment(Qt::AlignRight|Qt::AlignTrailing|Qt::AlignVCenter);
+
+        gridLayout->addWidget(label, 1, 0, 1, 1);
+
+        label_4 = new QLabel(DlgVarLength);
+        label_4->setObjectName(QString::fromUtf8("label_4"));
+        label_4->setMaximumSize(QSize(100, 16777215));
+        label_4->setAlignment(Qt::AlignRight|Qt::AlignTrailing|Qt::AlignVCenter);
+
+        gridLayout->addWidget(label_4, 3, 0, 1, 1);
+
+        spinHeadLen = new QSpinBox(DlgVarLength);
+        spinHeadLen->setObjectName(QString::fromUtf8("spinHeadLen"));
+        spinHeadLen->setMaximum(9999);
+
+        gridLayout->addWidget(spinHeadLen, 0, 1, 1, 1);
+
+        spinEndLen = new QSpinBox(DlgVarLength);
+        spinEndLen->setObjectName(QString::fromUtf8("spinEndLen"));
+        spinEndLen->setMaximum(9999);
+
+        gridLayout->addWidget(spinEndLen, 1, 1, 1, 1);
+
+        lineEditAllLen = new QLineEdit(DlgVarLength);
+        lineEditAllLen->setObjectName(QString::fromUtf8("lineEditAllLen"));
+        lineEditAllLen->setEnabled(true);
+        lineEditAllLen->setMaximumSize(QSize(120, 16777215));
+        lineEditAllLen->setAcceptDrops(false);
+        lineEditAllLen->setReadOnly(true);
+
+        gridLayout->addWidget(lineEditAllLen, 3, 1, 1, 1);
+
+        label_3 = new QLabel(DlgVarLength);
+        label_3->setObjectName(QString::fromUtf8("label_3"));
+        label_3->setMaximumSize(QSize(100, 16777215));
+        label_3->setAlignment(Qt::AlignRight|Qt::AlignTrailing|Qt::AlignVCenter);
+
+        gridLayout->addWidget(label_3, 0, 2, 1, 1);
+
+        spinVarLen = new QSpinBox(DlgVarLength);
+        spinVarLen->setObjectName(QString::fromUtf8("spinVarLen"));
+        spinVarLen->setMinimumSize(QSize(60, 0));
+        spinVarLen->setMinimum(-9999);
+        spinVarLen->setMaximum(9999);
+
+        gridLayout->addWidget(spinVarLen, 0, 3, 1, 1);
+
+        label_5 = new QLabel(DlgVarLength);
+        label_5->setObjectName(QString::fromUtf8("label_5"));
+        label_5->setMaximumSize(QSize(100, 16777215));
+        label_5->setAlignment(Qt::AlignRight|Qt::AlignTrailing|Qt::AlignVCenter);
+
+        gridLayout->addWidget(label_5, 1, 2, 1, 1);
+
+        spinVarLen1 = new QSpinBox(DlgVarLength);
+        spinVarLen1->setObjectName(QString::fromUtf8("spinVarLen1"));
+        spinVarLen1->setMinimumSize(QSize(60, 0));
+        spinVarLen1->setMinimum(-9999);
+        spinVarLen1->setMaximum(9999);
+
+        gridLayout->addWidget(spinVarLen1, 1, 3, 1, 1);
+
+        checkVarEN = new QCheckBox(DlgVarLength);
+        checkVarEN->setObjectName(QString::fromUtf8("checkVarEN"));
+        checkVarEN->setLayoutDirection(Qt::RightToLeft);
+
+        gridLayout->addWidget(checkVarEN, 3, 2, 1, 1);
+
+        pushButtonOK = new QPushButton(DlgVarLength);
+        pushButtonOK->setObjectName(QString::fromUtf8("pushButtonOK"));
+        pushButtonOK->setMaximumSize(QSize(100, 60));
+        pushButtonOK->setDefault(true);
+
+        gridLayout->addWidget(pushButtonOK, 5, 2, 1, 1);
+
+
+        gridLayout_2->addLayout(gridLayout, 0, 0, 1, 1);
+
+
+        retranslateUi(DlgVarLength);
+
+        QMetaObject::connectSlotsByName(DlgVarLength);
+    } // setupUi
+
+    void retranslateUi(QDialog *DlgVarLength)
+    {
+        DlgVarLength->setWindowTitle(QApplication::translate("DlgVarLength", "\345\217\230\351\225\277\345\226\267\345\215\260\345\217\202\346\225\260", 0, QApplication::UnicodeUTF8));
+        label_2->setText(QApplication::translate("DlgVarLength", "\345\244\264\351\203\250\351\225\277\345\272\246(m)", 0, QApplication::UnicodeUTF8));
+        label->setText(QApplication::translate("DlgVarLength", "\345\260\276\351\203\250\351\225\277\345\272\246(m)", 0, QApplication::UnicodeUTF8));
+        label_4->setText(QApplication::translate("DlgVarLength", "\346\200\273\351\225\277(m)", 0, QApplication::UnicodeUTF8));
+        label_3->setText(QApplication::translate("DlgVarLength", "\350\260\203\346\225\264\351\225\277\345\272\246(mm)", 0, QApplication::UnicodeUTF8));
+        label_5->setText(QApplication::translate("DlgVarLength", "\350\260\203\346\225\264\351\225\277\345\272\246(mm)", 0, QApplication::UnicodeUTF8));
+        checkVarEN->setText(QApplication::translate("DlgVarLength", "\345\217\257\345\217\230\351\225\277\345\272\246\345\205\201\350\256\270", 0, QApplication::UnicodeUTF8));
+        pushButtonOK->setText(QApplication::translate("DlgVarLength", "\347\241\256\345\256\232", 0, QApplication::UnicodeUTF8));
+    } // retranslateUi
+
+};
+
+namespace Ui {
+    class DlgVarLength: public Ui_DlgVarLength {};
+} // namespace Ui
+
+QT_END_NAMESPACE
+
+#endif // UI_DLGVARLENGTH_H
@@ -0,0 +1,160 @@
+#include "IPEdit.h"
+#include <QPainter>
+#include <QApplication>
+#include <QStyle>
+#include <QStyleOptionButton>
+#include <QKeyEvent>
+#include <QShortcutEvent>
+#include <QRegExpValidator>
+#include <QRegExp>
+#include <QClipboard>
+#include <QDebug>
+
+IPEdit::IPEdit(QWidget *parent) : QWidget(parent)
+{
+    init();
+}
+
+IPEdit::~IPEdit()
+{
+    
+}
+
+void IPEdit::init()
+{
+    m_layout = new QHBoxLayout(this);
+    m_layout->setSpacing(3);
+    m_layout->setContentsMargins(2, 0, 2, 0);
+    
+    m_edit1 = new QLineEdit(this);
+    m_edit2 = new QLineEdit(this);
+    m_edit3 = new QLineEdit(this);
+    m_edit4 = new QLineEdit(this);
+    
+    initForEdit(m_edit1);
+    initForEdit(m_edit2);
+    initForEdit(m_edit3);
+    initForEdit(m_edit4);
+    
+    m_dot1 = new QLabel(".", this);
+    m_dot2 = new QLabel(".", this);
+    m_dot3 = new QLabel(".", this);
+    
+    m_layout->addWidget(m_edit1, 1);
+    m_layout->addWidget(m_dot1);
+    m_layout->addWidget(m_edit2, 1);
+    m_layout->addWidget(m_dot2);
+    m_layout->addWidget(m_edit3, 1);
+    m_layout->addWidget(m_dot3);
+    m_layout->addWidget(m_edit4, 1);
+}
+
+void IPEdit::initForEdit(QLineEdit* edit)
+{
+    edit->setFrame(false);
+    edit->setAlignment(Qt::AlignCenter);
+    edit->installEventFilter(this);
+    
+    QRegExpValidator* validator = new QRegExpValidator(QRegExp("^(2[0-4]\\d|25[0-5]|[01]?\\d\\d?)$"), this);
+    edit->setValidator(validator);
+    
+    connect(edit, SIGNAL(textChanged(const QString&)), this, SLOT(editTextChanged(const QString&)));
+}
+
+QLineEdit* IPEdit::nextEdit(QLineEdit* curEdit)
+{
+    if (curEdit == m_edit1)
+        return m_edit2;
+    else if (curEdit == m_edit2)
+        return m_edit3;
+    else if (curEdit == m_edit3)
+        return m_edit4;
+    else
+        return NULL;
+}
+
+bool IPEdit::isEdit(QObject* object)
+{
+    return (object == m_edit1 ||
+            object == m_edit2 ||
+            object == m_edit3 ||
+            object == m_edit4);
+}
+
+QString IPEdit::text()
+{
+    QString sec1 = m_edit1->text().isEmpty() ? "0" : m_edit1->text();
+    QString sec2 = m_edit2->text().isEmpty() ? "0" : m_edit2->text();
+    QString sec3 = m_edit3->text().isEmpty() ? "0" : m_edit3->text();
+    QString sec4 = m_edit4->text().isEmpty() ? "0" : m_edit4->text();
+    return QString("%1.%2.%3.%4").arg(sec1).arg(sec2).arg(sec3).arg(sec4);
+}
+
+void IPEdit::setText(const QString& text)
+{
+    QRegExp reg("^((2[0-4]\\d|25[0-5]|[01]?\\d\\d?)\\.){3}(2[0-4]\\d|25[0-5]|[01]?\\d\\d?)$");
+    if (!reg.exactMatch(text))
+        return;
+    
+    QStringList ips = text.split(".");
+    m_edit1->setText(ips.at(0));
+    m_edit2->setText(ips.at(1));
+    m_edit3->setText(ips.at(2));
+    m_edit4->setText(ips.at(3));
+}
+
+void IPEdit::paintEvent(QPaintEvent* event)
+{
+    QPainter painter(this);
+
+    QStyleOptionFrame option;
+    option.initFrom(this);
+    option.lineWidth = 1;
+    style()->drawPrimitive(QStyle::PE_PanelLineEdit, &option, &painter, this);
+    QWidget::paintEvent(event);
+}
+
+bool IPEdit::eventFilter(QObject* object, QEvent* event)
+{
+    if (isEdit(object))
+    {
+        if (event->type() == QEvent::KeyPress)
+        {
+            QKeyEvent* keyEvent = static_cast<QKeyEvent*>(event);
+            if (keyEvent->key() == Qt::Key_Period)
+            {
+                QLineEdit* next = nextEdit(qobject_cast<QLineEdit*>(object));
+                if (next)
+                {
+                    next->setFocus();
+                    next->selectAll();
+                }
+            }
+            else if (keyEvent->matches(QKeySequence::Paste))
+            {
+                QString clip = QApplication::clipboard()->text(QClipboard::Clipboard);
+                if (clip.split(".").size() == 4)
+                {
+                    setText(clip);
+                    return true;
+                }
+            }
+        }
+    }
+
+    return QWidget::eventFilter(object, event);
+}
+
+void IPEdit::editTextChanged(const QString& text)
+{
+    QLineEdit* curEdit = qobject_cast<QLineEdit*>(sender());
+    if (text.size() == 3)
+    {
+        QLineEdit* next = nextEdit(curEdit);
+        if (next)
+        {
+            next->setFocus();
+            next->selectAll();
+        }
+    }
+}
@@ -0,0 +1,325 @@
+/********************************************************************************
+** Form generated from reading UI file 'zkedit.ui'
+**
+** Created by: Qt User Interface Compiler version 4.8.5
+**
+** WARNING! All changes made in this file will be lost when recompiling UI file!
+********************************************************************************/
+
+#ifndef UI_ZKEDIT_H
+#define UI_ZKEDIT_H
+
+#include <QtCore/QVariant>
+#include <QtGui/QAction>
+#include <QtGui/QApplication>
+#include <QtGui/QButtonGroup>
+#include <QtGui/QCheckBox>
+#include <QtGui/QGridLayout>
+#include <QtGui/QHBoxLayout>
+#include <QtGui/QHeaderView>
+#include <QtGui/QLabel>
+#include <QtGui/QLineEdit>
+#include <QtGui/QPushButton>
+#include <QtGui/QScrollArea>
+#include <QtGui/QSpinBox>
+#include <QtGui/QVBoxLayout>
+#include <QtGui/QWidget>
+#include <zkWidget.h>
+
+QT_BEGIN_NAMESPACE
+
+class Ui_ZkEdit
+{
+public:
+    QGridLayout *gridLayout_3;
+    QHBoxLayout *horizontalLayout;
+    QScrollArea *scrollArea;
+    zkWidget *widgetPic;
+    QVBoxLayout *verticalLayout;
+    QLabel *labelScaleLeval;
+    QLabel *labelFileName;
+    QGridLayout *gridLayout_2;
+    QPushButton *pushButtonDown;
+    QPushButton *pushButtonEnsure;
+    QPushButton *pushButtonLeft;
+    QPushButton *pushButtonUp;
+    QPushButton *pushButtonRight;
+    QGridLayout *gridLayout;
+    QPushButton *pushButtonReduce;
+    QPushButton *pushButtonSave;
+    QPushButton *pushButtonNew;
+    QSpinBox *spinBoxWidthPoint;
+    QPushButton *pushButtonSaveAs;
+    QLabel *label_2;
+    QCheckBox *checkBoxPicExpand;
+    QPushButton *pushButtonOpen;
+    QLabel *label;
+    QLineEdit *lineEdit;
+    QSpinBox *spinBoxHeightPoint;
+    QPushButton *pushButtonEnlarge;
+    QPushButton *pushButtonImport;
+    QCheckBox *checkBoxTrimPic;
+
+    void setupUi(QWidget *ZkEdit)
+    {
+        if (ZkEdit->objectName().isEmpty())
+            ZkEdit->setObjectName(QString::fromUtf8("ZkEdit"));
+        ZkEdit->resize(800, 600);
+        ZkEdit->setFocusPolicy(Qt::StrongFocus);
+        gridLayout_3 = new QGridLayout(ZkEdit);
+        gridLayout_3->setObjectName(QString::fromUtf8("gridLayout_3"));
+        horizontalLayout = new QHBoxLayout();
+        horizontalLayout->setObjectName(QString::fromUtf8("horizontalLayout"));
+        scrollArea = new QScrollArea(ZkEdit);
+        scrollArea->setObjectName(QString::fromUtf8("scrollArea"));
+        scrollArea->setWidgetResizable(false);
+        scrollArea->setAlignment(Qt::AlignCenter);
+        widgetPic = new zkWidget();
+        widgetPic->setObjectName(QString::fromUtf8("widgetPic"));
+        widgetPic->setGeometry(QRect(0, 89, 400, 400));
+        scrollArea->setWidget(widgetPic);
+
+        horizontalLayout->addWidget(scrollArea);
+
+        verticalLayout = new QVBoxLayout();
+        verticalLayout->setSpacing(0);
+        verticalLayout->setObjectName(QString::fromUtf8("verticalLayout"));
+        verticalLayout->setContentsMargins(0, 0, 0, 0);
+        labelScaleLeval = new QLabel(ZkEdit);
+        labelScaleLeval->setObjectName(QString::fromUtf8("labelScaleLeval"));
+        labelScaleLeval->setMaximumSize(QSize(16777215, 20));
+
+        verticalLayout->addWidget(labelScaleLeval);
+
+        labelFileName = new QLabel(ZkEdit);
+        labelFileName->setObjectName(QString::fromUtf8("labelFileName"));
+        labelFileName->setMaximumSize(QSize(180, 20));
+
+        verticalLayout->addWidget(labelFileName);
+
+        gridLayout_2 = new QGridLayout();
+        gridLayout_2->setObjectName(QString::fromUtf8("gridLayout_2"));
+        gridLayout_2->setHorizontalSpacing(0);
+        gridLayout_2->setVerticalSpacing(30);
+        pushButtonDown = new QPushButton(ZkEdit);
+        pushButtonDown->setObjectName(QString::fromUtf8("pushButtonDown"));
+        pushButtonDown->setMinimumSize(QSize(50, 50));
+        pushButtonDown->setMaximumSize(QSize(50, 50));
+        QIcon icon;
+        icon.addFile(QString::fromUtf8(":/icon/arrowdown.png"), QSize(), QIcon::Normal, QIcon::Off);
+        pushButtonDown->setIcon(icon);
+
+        gridLayout_2->addWidget(pushButtonDown, 2, 2, 1, 1);
+
+        pushButtonEnsure = new QPushButton(ZkEdit);
+        pushButtonEnsure->setObjectName(QString::fromUtf8("pushButtonEnsure"));
+        pushButtonEnsure->setMinimumSize(QSize(50, 50));
+        pushButtonEnsure->setMaximumSize(QSize(50, 50));
+        QIcon icon1;
+        icon1.addFile(QString::fromUtf8(":/icon/sure.png"), QSize(), QIcon::Normal, QIcon::Off);
+        pushButtonEnsure->setIcon(icon1);
+        pushButtonEnsure->setIconSize(QSize(24, 24));
+
+        gridLayout_2->addWidget(pushButtonEnsure, 1, 2, 1, 1);
+
+        pushButtonLeft = new QPushButton(ZkEdit);
+        pushButtonLeft->setObjectName(QString::fromUtf8("pushButtonLeft"));
+        pushButtonLeft->setMinimumSize(QSize(50, 50));
+        pushButtonLeft->setMaximumSize(QSize(50, 50));
+        QIcon icon2;
+        icon2.addFile(QString::fromUtf8(":/icon/arrowleft.png"), QSize(), QIcon::Normal, QIcon::Off);
+        pushButtonLeft->setIcon(icon2);
+
+        gridLayout_2->addWidget(pushButtonLeft, 1, 1, 1, 1);
+
+        pushButtonUp = new QPushButton(ZkEdit);
+        pushButtonUp->setObjectName(QString::fromUtf8("pushButtonUp"));
+        pushButtonUp->setMinimumSize(QSize(50, 50));
+        pushButtonUp->setMaximumSize(QSize(50, 50));
+        QIcon icon3;
+        icon3.addFile(QString::fromUtf8(":/icon/arrowup.png"), QSize(), QIcon::Normal, QIcon::Off);
+        pushButtonUp->setIcon(icon3);
+
+        gridLayout_2->addWidget(pushButtonUp, 0, 2, 1, 1);
+
+        pushButtonRight = new QPushButton(ZkEdit);
+        pushButtonRight->setObjectName(QString::fromUtf8("pushButtonRight"));
+        pushButtonRight->setMinimumSize(QSize(50, 50));
+        pushButtonRight->setMaximumSize(QSize(50, 50));
+        QIcon icon4;
+        icon4.addFile(QString::fromUtf8(":/icon/arrowright.png"), QSize(), QIcon::Normal, QIcon::Off);
+        pushButtonRight->setIcon(icon4);
+
+        gridLayout_2->addWidget(pushButtonRight, 1, 3, 1, 1);
+
+
+        verticalLayout->addLayout(gridLayout_2);
+
+        gridLayout = new QGridLayout();
+        gridLayout->setSpacing(5);
+        gridLayout->setObjectName(QString::fromUtf8("gridLayout"));
+        pushButtonReduce = new QPushButton(ZkEdit);
+        pushButtonReduce->setObjectName(QString::fromUtf8("pushButtonReduce"));
+        pushButtonReduce->setMinimumSize(QSize(0, 45));
+        QIcon icon5;
+        icon5.addFile(QString::fromUtf8(":/icon/zoomout.png"), QSize(), QIcon::Normal, QIcon::Off);
+        pushButtonReduce->setIcon(icon5);
+
+        gridLayout->addWidget(pushButtonReduce, 1, 2, 1, 1);
+
+        pushButtonSave = new QPushButton(ZkEdit);
+        pushButtonSave->setObjectName(QString::fromUtf8("pushButtonSave"));
+        QIcon icon6;
+        icon6.addFile(QString::fromUtf8(":/icon/filesave.png"), QSize(), QIcon::Normal, QIcon::Off);
+        pushButtonSave->setIcon(icon6);
+
+        gridLayout->addWidget(pushButtonSave, 6, 1, 1, 1);
+
+        pushButtonNew = new QPushButton(ZkEdit);
+        pushButtonNew->setObjectName(QString::fromUtf8("pushButtonNew"));
+        QIcon icon7;
+        icon7.addFile(QString::fromUtf8(":/icon/filenew.png"), QSize(), QIcon::Normal, QIcon::Off);
+        pushButtonNew->setIcon(icon7);
+
+        gridLayout->addWidget(pushButtonNew, 6, 2, 1, 1);
+
+        spinBoxWidthPoint = new QSpinBox(ZkEdit);
+        spinBoxWidthPoint->setObjectName(QString::fromUtf8("spinBoxWidthPoint"));
+        QSizePolicy sizePolicy(QSizePolicy::Minimum, QSizePolicy::Preferred);
+        sizePolicy.setHorizontalStretch(0);
+        sizePolicy.setVerticalStretch(0);
+        sizePolicy.setHeightForWidth(spinBoxWidthPoint->sizePolicy().hasHeightForWidth());
+        spinBoxWidthPoint->setSizePolicy(sizePolicy);
+        spinBoxWidthPoint->setMaximumSize(QSize(16777215, 37));
+        spinBoxWidthPoint->setMinimum(1);
+        spinBoxWidthPoint->setMaximum(256);
+        spinBoxWidthPoint->setValue(12);
+
+        gridLayout->addWidget(spinBoxWidthPoint, 3, 1, 1, 1);
+
+        pushButtonSaveAs = new QPushButton(ZkEdit);
+        pushButtonSaveAs->setObjectName(QString::fromUtf8("pushButtonSaveAs"));
+        QIcon icon8;
+        icon8.addFile(QString::fromUtf8(":/icon/filesaveas.png"), QSize(), QIcon::Normal, QIcon::Off);
+        pushButtonSaveAs->setIcon(icon8);
+
+        gridLayout->addWidget(pushButtonSaveAs, 5, 2, 1, 1);
+
+        label_2 = new QLabel(ZkEdit);
+        label_2->setObjectName(QString::fromUtf8("label_2"));
+        label_2->setMaximumSize(QSize(16777215, 20));
+
+        gridLayout->addWidget(label_2, 2, 2, 1, 1);
+
+        checkBoxPicExpand = new QCheckBox(ZkEdit);
+        checkBoxPicExpand->setObjectName(QString::fromUtf8("checkBoxPicExpand"));
+
+        gridLayout->addWidget(checkBoxPicExpand, 0, 1, 1, 1);
+
+        pushButtonOpen = new QPushButton(ZkEdit);
+        pushButtonOpen->setObjectName(QString::fromUtf8("pushButtonOpen"));
+        QIcon icon9;
+        icon9.addFile(QString::fromUtf8(":/icon/fileopen.png"), QSize(), QIcon::Normal, QIcon::Off);
+        pushButtonOpen->setIcon(icon9);
+
+        gridLayout->addWidget(pushButtonOpen, 5, 1, 1, 1);
+
+        label = new QLabel(ZkEdit);
+        label->setObjectName(QString::fromUtf8("label"));
+        label->setMaximumSize(QSize(16777215, 20));
+
+        gridLayout->addWidget(label, 2, 1, 1, 1);
+
+        lineEdit = new QLineEdit(ZkEdit);
+        lineEdit->setObjectName(QString::fromUtf8("lineEdit"));
+        lineEdit->setEnabled(false);
+        QSizePolicy sizePolicy1(QSizePolicy::Expanding, QSizePolicy::Preferred);
+        sizePolicy1.setHorizontalStretch(0);
+        sizePolicy1.setVerticalStretch(0);
+        sizePolicy1.setHeightForWidth(lineEdit->sizePolicy().hasHeightForWidth());
+        lineEdit->setSizePolicy(sizePolicy1);
+        lineEdit->setMaximumSize(QSize(80, 16777215));
+        lineEdit->setMaxLength(11);
+
+        gridLayout->addWidget(lineEdit, 4, 1, 1, 1);
+
+        spinBoxHeightPoint = new QSpinBox(ZkEdit);
+        spinBoxHeightPoint->setObjectName(QString::fromUtf8("spinBoxHeightPoint"));
+        sizePolicy.setHeightForWidth(spinBoxHeightPoint->sizePolicy().hasHeightForWidth());
+        spinBoxHeightPoint->setSizePolicy(sizePolicy);
+        spinBoxHeightPoint->setMinimum(1);
+        spinBoxHeightPoint->setMaximum(256);
+        spinBoxHeightPoint->setValue(12);
+
+        gridLayout->addWidget(spinBoxHeightPoint, 3, 2, 1, 1);
+
+        pushButtonEnlarge = new QPushButton(ZkEdit);
+        pushButtonEnlarge->setObjectName(QString::fromUtf8("pushButtonEnlarge"));
+        pushButtonEnlarge->setMinimumSize(QSize(0, 45));
+        QIcon icon10;
+        icon10.addFile(QString::fromUtf8(":/icon/zoomin.png"), QSize(), QIcon::Normal, QIcon::Off);
+        pushButtonEnlarge->setIcon(icon10);
+
+        gridLayout->addWidget(pushButtonEnlarge, 1, 1, 1, 1);
+
+        pushButtonImport = new QPushButton(ZkEdit);
+        pushButtonImport->setObjectName(QString::fromUtf8("pushButtonImport"));
+        QIcon icon11;
+        icon11.addFile(QString::fromUtf8(":/icon/fileimport.png"), QSize(), QIcon::Normal, QIcon::Off);
+        pushButtonImport->setIcon(icon11);
+
+        gridLayout->addWidget(pushButtonImport, 4, 2, 1, 1);
+
+        checkBoxTrimPic = new QCheckBox(ZkEdit);
+        checkBoxTrimPic->setObjectName(QString::fromUtf8("checkBoxTrimPic"));
+
+        gridLayout->addWidget(checkBoxTrimPic, 0, 2, 1, 1);
+
+
+        verticalLayout->addLayout(gridLayout);
+
+
+        horizontalLayout->addLayout(verticalLayout);
+
+
+        gridLayout_3->addLayout(horizontalLayout, 0, 0, 1, 1);
+
+
+        retranslateUi(ZkEdit);
+
+        QMetaObject::connectSlotsByName(ZkEdit);
+    } // setupUi
+
+    void retranslateUi(QWidget *ZkEdit)
+    {
+        ZkEdit->setWindowTitle(QApplication::translate("ZkEdit", "Form", 0, QApplication::UnicodeUTF8));
+        labelScaleLeval->setText(QApplication::translate("ZkEdit", "\347\274\226\350\276\221\345\233\276\346\241\210", 0, QApplication::UnicodeUTF8));
+        labelFileName->setText(QString());
+        pushButtonDown->setText(QString());
+        pushButtonEnsure->setText(QString());
+        pushButtonLeft->setText(QString());
+        pushButtonUp->setText(QString());
+        pushButtonRight->setText(QString());
+        pushButtonReduce->setText(QApplication::translate("ZkEdit", "\347\274\251\345\260\217", 0, QApplication::UnicodeUTF8));
+        pushButtonSave->setText(QApplication::translate("ZkEdit", "\344\277\235\345\255\230", 0, QApplication::UnicodeUTF8));
+        pushButtonNew->setText(QApplication::translate("ZkEdit", "\346\226\260\345\273\272", 0, QApplication::UnicodeUTF8));
+        pushButtonSaveAs->setText(QApplication::translate("ZkEdit", "\344\277\235\345\255\230\344\270\272", 0, QApplication::UnicodeUTF8));
+        label_2->setText(QApplication::translate("ZkEdit", "\351\253\230\345\272\246", 0, QApplication::UnicodeUTF8));
+        checkBoxPicExpand->setText(QApplication::translate("ZkEdit", "\345\233\276\345\203\217\346\211\251\345\274\240", 0, QApplication::UnicodeUTF8));
+        pushButtonOpen->setText(QApplication::translate("ZkEdit", "\346\211\223\345\274\200", 0, QApplication::UnicodeUTF8));
+        label->setText(QApplication::translate("ZkEdit", "\345\256\275\345\272\246", 0, QApplication::UnicodeUTF8));
+        lineEdit->setText(QApplication::translate("ZkEdit", "A", 0, QApplication::UnicodeUTF8));
+        pushButtonEnlarge->setText(QApplication::translate("ZkEdit", "\346\224\276\345\244\247", 0, QApplication::UnicodeUTF8));
+        pushButtonImport->setText(QApplication::translate("ZkEdit", "\345\257\274\345\205\245", 0, QApplication::UnicodeUTF8));
+        checkBoxTrimPic->setText(QApplication::translate("ZkEdit", "\345\233\276\345\203\217\350\243\201\345\211\252", 0, QApplication::UnicodeUTF8));
+    } // retranslateUi
+
+};
+
+namespace Ui {
+    class ZkEdit: public Ui_ZkEdit {};
+} // namespace Ui
+
+QT_END_NAMESPACE
+
+#endif // UI_ZKEDIT_H
@@ -0,0 +1,111 @@
+/****************************************************************************
+** Meta object code from reading C++ file 'dialogshowcounter.h'
+**
+** Created by: The Qt Meta Object Compiler version 63 (Qt 4.8.5)
+**
+** WARNING! All changes made in this file will be lost!
+*****************************************************************************/
+
+#include "../dialogshowcounter.h"
+#if !defined(Q_MOC_OUTPUT_REVISION)
+#error "The header file 'dialogshowcounter.h' doesn't include <QObject>."
+#elif Q_MOC_OUTPUT_REVISION != 63
+#error "This file was generated using the moc from 4.8.5. It"
+#error "cannot be used with the include files from this version of Qt."
+#error "(The moc has changed too much.)"
+#endif
+
+QT_BEGIN_MOC_NAMESPACE
+static const uint qt_meta_data_DialogShowCounter[] = {
+
+ // content:
+       6,       // revision
+       0,       // classname
+       0,    0, // classinfo
+       4,   14, // methods
+       0,    0, // properties
+       0,    0, // enums/sets
+       0,    0, // constructors
+       0,       // flags
+       1,       // signalCount
+
+ // signals: signature, parameters, type, tag, flags
+      39,   19,   18,   18, 0x05,
+
+ // slots: signature, parameters, type, tag, flags
+      67,   18,   18,   18, 0x08,
+      91,   18,   18,   18, 0x08,
+     125,   18,   18,   18, 0x08,
+
+       0        // eod
+};
+
+static const char qt_meta_stringdata_DialogShowCounter[] = {
+    "DialogShowCounter\0\0cycle_time,area_end\0"
+    "set_count_endvalue(int,int)\0"
+    "on_pushButton_clicked()\0"
+    "on_CycleprintpushButton_clicked()\0"
+    "ondialogcycleprintAccepted()\0"
+};
+
+void DialogShowCounter::qt_static_metacall(QObject *_o, QMetaObject::Call _c, int _id, void **_a)
+{
+    if (_c == QMetaObject::InvokeMetaMethod) {
+        Q_ASSERT(staticMetaObject.cast(_o));
+        DialogShowCounter *_t = static_cast<DialogShowCounter *>(_o);
+        switch (_id) {
+        case 0: _t->set_count_endvalue((*reinterpret_cast< int(*)>(_a[1])),(*reinterpret_cast< int(*)>(_a[2]))); break;
+        case 1: _t->on_pushButton_clicked(); break;
+        case 2: _t->on_CycleprintpushButton_clicked(); break;
+        case 3: _t->ondialogcycleprintAccepted(); break;
+        default: ;
+        }
+    }
+}
+
+const QMetaObjectExtraData DialogShowCounter::staticMetaObjectExtraData = {
+    0,  qt_static_metacall 
+};
+
+const QMetaObject DialogShowCounter::staticMetaObject = {
+    { &QDialog::staticMetaObject, qt_meta_stringdata_DialogShowCounter,
+      qt_meta_data_DialogShowCounter, &staticMetaObjectExtraData }
+};
+
+#ifdef Q_NO_DATA_RELOCATION
+const QMetaObject &DialogShowCounter::getStaticMetaObject() { return staticMetaObject; }
+#endif //Q_NO_DATA_RELOCATION
+
+const QMetaObject *DialogShowCounter::metaObject() const
+{
+    return QObject::d_ptr->metaObject ? QObject::d_ptr->metaObject : &staticMetaObject;
+}
+
+void *DialogShowCounter::qt_metacast(const char *_clname)
+{
+    if (!_clname) return 0;
+    if (!strcmp(_clname, qt_meta_stringdata_DialogShowCounter))
+        return static_cast<void*>(const_cast< DialogShowCounter*>(this));
+    return QDialog::qt_metacast(_clname);
+}
+
+int DialogShowCounter::qt_metacall(QMetaObject::Call _c, int _id, void **_a)
+{
+    _id = QDialog::qt_metacall(_c, _id, _a);
+    if (_id < 0)
+        return _id;
+    if (_c == QMetaObject::InvokeMetaMethod) {
+        if (_id < 4)
+            qt_static_metacall(this, _c, _id, _a);
+        _id -= 4;
+    }
+    return _id;
+}
+
+// SIGNAL 0
+void DialogShowCounter::set_count_endvalue(int _t1, int _t2)
+{
+    void *_a[] = { 0, const_cast<void*>(reinterpret_cast<const void*>(&_t1)), const_cast<void*>(reinterpret_cast<const void*>(&_t2)) };
+    QMetaObject::activate(this, &staticMetaObject, 0, _a);
+}
+QT_END_MOC_NAMESPACE
@@ -0,0 +1,153 @@
+/****************************************************************************
+** Meta object code from reading C++ file 'modbusserial.h'
+**
+** Created: Wed Dec 25 15:36:17 2024
+**      by: The Qt Meta Object Compiler version 62 (Qt 4.6.3)
+**
+** WARNING! All changes made in this file will be lost!
+*****************************************************************************/
+
+#include "../modbus/modbusserial.h"
+#if !defined(Q_MOC_OUTPUT_REVISION)
+#error "The header file 'modbusserial.h' doesn't include <QObject>."
+#elif Q_MOC_OUTPUT_REVISION != 62
+#error "This file was generated using the moc from 4.6.3. It"
+#error "cannot be used with the include files from this version of Qt."
+#error "(The moc has changed too much.)"
+#endif
+
+QT_BEGIN_MOC_NAMESPACE
+static const uint qt_meta_data_ModbusSerial[] = {
+
+ // content:
+       4,       // revision
+       0,       // classname
+       0,    0, // classinfo
+       9,   14, // methods
+       0,    0, // properties
+       0,    0, // enums/sets
+       0,    0, // constructors
+       0,       // flags
+       8,       // signalCount
+
+ // signals: signature, parameters, type, tag, flags
+      14,   13,   13,   13, 0x05,
+      29,   13,   13,   13, 0x05,
+      42,   13,   13,   13, 0x05,
+      55,   13,   13,   13, 0x05,
+      69,   67,   13,   13, 0x05,
+      92,   13,   13,   13, 0x05,
+     106,   13,   13,   13, 0x05,
+     142,  122,   13,   13, 0x05,
+
+ // slots: signature, parameters, type, tag, flags
+     183,  177,  170,   13, 0x0a,
+
+       0        // eod
+};
+
+static const char qt_meta_stringdata_ModbusSerial[] = {
+    "ModbusSerial\0\0updateQRcode()\0startPrint()\0"
+    "pausePrint()\0stopPrint()\0,\0"
+    "openFile(QString,bool)\0faultResume()\0"
+    "writeCalendar()\0lineSpace,charSpace\0"
+    "mbLineAndCharSpace(int,int)\0qint32\0"
+    "index\0processCommands(qint32)\0"
+};
+
+const QMetaObject ModbusSerial::staticMetaObject = {
+    { &QObject::staticMetaObject, qt_meta_stringdata_ModbusSerial,
+      qt_meta_data_ModbusSerial, 0 }
+};
+
+#ifdef Q_NO_DATA_RELOCATION
+const QMetaObject &ModbusSerial::getStaticMetaObject() { return staticMetaObject; }
+#endif //Q_NO_DATA_RELOCATION
+
+const QMetaObject *ModbusSerial::metaObject() const
+{
+    return QObject::d_ptr->metaObject ? QObject::d_ptr->metaObject : &staticMetaObject;
+}
+
+void *ModbusSerial::qt_metacast(const char *_clname)
+{
+    if (!_clname) return 0;
+    if (!strcmp(_clname, qt_meta_stringdata_ModbusSerial))
+        return static_cast<void*>(const_cast< ModbusSerial*>(this));
+    return QObject::qt_metacast(_clname);
+}
+
+int ModbusSerial::qt_metacall(QMetaObject::Call _c, int _id, void **_a)
+{
+    _id = QObject::qt_metacall(_c, _id, _a);
+    if (_id < 0)
+        return _id;
+    if (_c == QMetaObject::InvokeMetaMethod) {
+        switch (_id) {
+        case 0: updateQRcode(); break;
+        case 1: startPrint(); break;
+        case 2: pausePrint(); break;
+        case 3: stopPrint(); break;
+        case 4: openFile((*reinterpret_cast< QString(*)>(_a[1])),(*reinterpret_cast< bool(*)>(_a[2]))); break;
+        case 5: faultResume(); break;
+        case 6: writeCalendar(); break;
+        case 7: mbLineAndCharSpace((*reinterpret_cast< int(*)>(_a[1])),(*reinterpret_cast< int(*)>(_a[2]))); break;
+        case 8: { qint32 _r = processCommands((*reinterpret_cast< qint32(*)>(_a[1])));
+            if (_a[0]) *reinterpret_cast< qint32*>(_a[0]) = _r; }  break;
+        default: ;
+        }
+        _id -= 9;
+    }
+    return _id;
+}
+
+// SIGNAL 0
+void ModbusSerial::updateQRcode()
+{
+    QMetaObject::activate(this, &staticMetaObject, 0, 0);
+}
+
+// SIGNAL 1
+void ModbusSerial::startPrint()
+{
+    QMetaObject::activate(this, &staticMetaObject, 1, 0);
+}
+
+// SIGNAL 2
+void ModbusSerial::pausePrint()
+{
+    QMetaObject::activate(this, &staticMetaObject, 2, 0);
+}
+
+// SIGNAL 3
+void ModbusSerial::stopPrint()
+{
+    QMetaObject::activate(this, &staticMetaObject, 3, 0);
+}
+
+// SIGNAL 4
+void ModbusSerial::openFile(QString _t1, bool _t2)
+{
+    void *_a[] = { 0, const_cast<void*>(reinterpret_cast<const void*>(&_t1)), const_cast<void*>(reinterpret_cast<const void*>(&_t2)) };
+    QMetaObject::activate(this, &staticMetaObject, 4, _a);
+}
+
+// SIGNAL 5
+void ModbusSerial::faultResume()
+{
+    QMetaObject::activate(this, &staticMetaObject, 5, 0);
+}
+
+// SIGNAL 6
+void ModbusSerial::writeCalendar()
+{
+    QMetaObject::activate(this, &staticMetaObject, 6, 0);
+}
+
+// SIGNAL 7
+void ModbusSerial::mbLineAndCharSpace(int _t1, int _t2)
+{
+    void *_a[] = { 0, const_cast<void*>(reinterpret_cast<const void*>(&_t1)), const_cast<void*>(reinterpret_cast<const void*>(&_t2)) };
+    QMetaObject::activate(this, &staticMetaObject, 7, _a);
+}
+QT_END_MOC_NAMESPACE
@@ -0,0 +1,741 @@
+#include "TriggerCtrl.h"
+#include "ui_triggerctrl.h"
+#include <QCheckBox>
+#include <QMessageBox>
+#include <QValidator>
+#include <QDoubleValidator>
+#include "qdebug.h"
+#include <stdio.h>
+#include "myinclude.h"
+#include "Public.h"
+#include "VerBVersion.h"
+#include "DevOp.h"
+#include "InkJetPrinter.h"
+extern InkJetPrinter *pInkJectPrinter;
+/*  readme: 20140809
+1. 同步字宽mm: 0.1+ w*(4-0.1) = 0.1+3.9w (mm)
+2. 按长度喷印:
+*/
+
+// 20140923－12：05版本存在图形方式下变量不变绿问题，新版本已经更正
+// 20141013－16：36修正密码有效期设置错误。
+//2015-10-17 二维码变量问题
+// 2015-11-01 无聊： 要从V6S版本恢复原来的 para.set_HVData_Flag = 0; 参数
+// 估计过段时间又要要求增加 UART功能。   V6S 原来已经有这个功能了。但他们不用！！
+// 20151109   新增计数1和计数器2单独立即清零 版本号 No42
+// 更新了Vietname字库，使用中文使用wenquanyiBitmap，编译uncode编码使用wenquanyimicrohei,英文自己编，越南语自己编，基于DejaVu Sans
+// 新版软件更新或升级，会因参数错位，出现隔膜位置设定值（等参数）错误，引起主墨泵不工作，开机不循环等现象。（解决办法，重新检查并设置所有参数）
+// 20160203:修改了变量定位方式，更新的Image图片。 将左下角更换为RGB ＝ 250，250，0  －＝＝＝ 0xFFF7FC00
+//  修正了停止打印关闭高压的问题，重新打印出现高压故障
+// 修改了密码一周一变，增加了密码校验，需要使用新版20以上的手机密码软件，密码为7位；
+// 20160218  修改了提示框显示方式，避免提示阻塞处理进程
+
+//  20160304   优化了变量显示； 增加了中心旋转交替功能；增加了 13位随机码打印功能； 修正界面显示字库部分汉字问题
+//   本次修改需要同时更并按ARM和FPGA
+
+//  FPGA实现自动点距调整，实现连续点位置修正 20160714 FPGA版本 V44， 0714B
+// 20160715 : 去掉了“点距电压微调”、“内存数据显示”、部分相检控制参数设置
+// 20160729： 发现打开历史记录会死机问题，原因待查。但执行删除历史记录后，可避免再次死机。
+// 20160723： 增加电眼复位功能。 与电眼清零不同，复位时，计数不清零，而是等于预设的当前值。
+// 20160718： 参考日立方案，优化打印效果
+/*
+  20160728：发现历史记录打开时，会死机
+  20160729: 查找原因：fi
+// 20160806：重要修改 ： 毫米脉冲的系数由X8改为X256，原因是：使用X8时传递误差较大，导致1000mm会有6mm误差， 使用X256(即8位二进制表示小数时，可以精确到0.004，从而提高精度)
+    X8 时，小数精度为0.125而已
+
+  20160812：增加左横，右横变量
+    if((varType<9) // 普通变量
+      ||(varType>=20 && varType<29) // 横左变量
+      ||(varType>=40 && varType<49) // 右横变量
+ if(fontname.contains("SerifL") ||fontname.contains("serifl") ) varType1= 20+varType;
+ else if(fontname.contains("SerifR") ||fontname.contains("serifr") ) varType1= 40+varType;
+  20160831: 增加临时密码，每小时一变
+
+  20160904： 解决重新开机后，有时不能自动打印文件问题。
+  20160905: 第二行单独变量时显示不全问题
+
+  // 20160912: 去掉高压故障自动关闭回收的默认值 1
+  // 20160912: 设置了隐藏按键，用于对墨线时间和开机次数进行复位 No49
+  20160927： FIFO实现RAND 码上传，暂时与RST0806 No49区别开来 No50
+  20161212： 修改总产品计数器清零功能。由ARM清零改为FPGA清零  No51  // [3]总产品计数器清零FPGA
+  20161217: 增加了 SPV210编译选项，以处理V6核心版驱动问题
+            修改随机码处理函数，以解决 不能输出奇数位 随机码问题。
+
+  20170217: 有厂家只想打一条横线，改最小列点阵数。
+  20170224： 输入密码不回显
+  20170313: 修改开机重启或重载参数时，设定计数当前值为起始值
+  20170318: 制作0318版本的刷机文件
+
+  20170803： 增加外接屏功能，20170808完成
+
+  */
+
+#ifdef MIMA
+#ifdef ALT16
+#define BVER    "(ALT53)" TST    // 20160801 之前使用 RST46
+#else
+#define BVER    "(SUN53)" TST    // 20160801 之前使用 RST46
+#endif
+#endif
+//#define NON_CABLE//喷印间隔固定
+//  20160507 1138
+// 20161209 编辑 小数点喷印间隔
+// 20170603: 太阳能条码专用版本
+// Nam Ninh phồng tuyệt vời Mã Technology Co., Ltd.
+TriggerCtrl::TriggerCtrl(QWidget *parent) :
+    QWidget(parent),
+    ui(new Ui::TriggerCtrl)
+{
+    ui->setupUi(this);
+    //#ifdef SYNLENFLOAT
+    QRegExp double_rx100("10000000|([0-9]{1,8}[\.][0-9]{0,1})");
+    ui->spinBoxSynTriggerPrintLen->setValidator(new QRegExpValidator(double_rx100,ui->spinBoxSynTriggerPrintLen));
+#ifdef NON_CABLE
+    ui->spinBoxSynTriggerPrintLen->setEnabled(0);
+#endif
+    //#endif
+    pulseNumFix = new PulseNumFix(parent);
+    pulseNumFix->hide();
+    ui->lineEditTriggerPulsePerMm->setValidator(new QDoubleValidator(0));
+    connect(pulseNumFix,SIGNAL(pulseNuxFixDone(float)),this,SLOT(onPulseNumFixDone(float)));
+    //ui->test_version->setText (tr(BUILD_DATE));
+
+    updateSysStatusToUI();
+    QString s;
+#if 0 /* roger use new Version manage,so delete it */
+    s.sprintf(" %s ",__TIME__);
+
+#ifdef MYTEST
+    s = (QString) Public::DateToString(__DATE__)+s + "A2451测试";
+#else
+    s = (QString) Public::DateToString(__DATE__)+s + BVER;
+#endif
+
+#else
+    s.sprintf("%d.%d.%02d_GuiL_", UP_PRINTER_MAJOR_VER, UP_PRINTER_MINOR_VER,UP_PRINTER_RIVISION_VER);
+    s = s + (QString) Public::DateToString(__DATE__)+"_"+ QString(__TIME__)+"_"+ UP_PRINTER_STAGE_VER;
+    //s = s + BVER;
+#endif
+    ui->test_version->setText(s);
+
+    ui->checkBoxEleEyeMakeClean->setVisible(false);
+    tr("独立参数");
+    //ui->labelDelayTriggerValue->setText(tr("重复间隔(毫秒)"));
+    //--if( QString(BUILD_DATE).left(21)!="2015-10-26 20:56(M40)"){
+    //--ui->labelEleMaskTime->hide();
+    //--ui->spinBoxEleMaskTime->hide();
+    //--}
+
+    if(Public::ReadLanguageName()=="Chinese"){
+        ui->label_miv12->setPixmap(QPixmap(QString::fromUtf8(":/image/MIV12.png")));
+    }else
+    {
+        ui->label_miv12->setPixmap(QPixmap(QString::fromUtf8(":/image/MIV13.png")));
+    }
+    //qDebug()<<"Run TriggerCtrl ok.";
+#ifdef ENGLISH
+    ui->label_miv12->setPixmap(QPixmap(QString::fromUtf8(":/image/MIV13.png")));
+#endif
+    ui->spinBoxOuputPulseCol->setHidden(1);
+    //       ui->labelOuputPulseCol->setHidden(1);
+}
+
+TriggerCtrl::~TriggerCtrl()
+{
+    delete ui;
+    delete pulseNumFix;
+}
+
+void TriggerCtrl::setTriggerUI(int triggerMode){
+
+    ui->radioButtonDelayTrigger->setChecked(triggerMode == PRINT_TRIGGER_TIME);
+    ui->spinBoxDelayTriggerValue->setEnabled(triggerMode == PRINT_TRIGGER_TIME);
+    ui->labelDelayTriggerValue->setEnabled(triggerMode == PRINT_TRIGGER_TIME);
+    ui->comboBoxTimeTriggerMode->setEnabled(triggerMode == PRINT_TRIGGER_TIME);
+    ui->labelTimeTriggerMode->setEnabled(triggerMode == PRINT_TRIGGER_TIME);
+
+    ui->radioButtonEleEyeEdgetTrigger->setChecked( triggerMode == PRINT_TRIGGER_ELEC_EYE_EDGE);
+    ui->radioButtonEleEyeLevelTrigger->setChecked(triggerMode == PRINT_TRIGGER_ELEC_EYE_VOLTATE_LEVEL);
+    ui->spinBoxEleEyeTriggerIntervalMs->setEnabled(triggerMode == PRINT_TRIGGER_ELEC_EYE_VOLTATE_LEVEL || triggerMode == PRINT_TRIGGER_ELEC_EYE_EDGE);
+    ui->labelEleEyeTriggerIntervalMs->setEnabled(triggerMode == PRINT_TRIGGER_ELEC_EYE_VOLTATE_LEVEL || triggerMode == PRINT_TRIGGER_ELEC_EYE_EDGE);
+    ui->spinBoxEleEyeTriggerRepeatCnt->setEnabled(triggerMode == PRINT_TRIGGER_ELEC_EYE_VOLTATE_LEVEL || triggerMode == PRINT_TRIGGER_ELEC_EYE_EDGE);
+    ui->labelEleEyeTriggerRepeatCnt->setEnabled(triggerMode == PRINT_TRIGGER_ELEC_EYE_VOLTATE_LEVEL || triggerMode == PRINT_TRIGGER_ELEC_EYE_EDGE);
+    ui->spinBoxEleEyeTriggerPrintDelay->setEnabled(triggerMode == PRINT_TRIGGER_ELEC_EYE_VOLTATE_LEVEL || triggerMode == PRINT_TRIGGER_ELEC_EYE_EDGE || PRINT_TRIGGER_SYNCHRONIZER);
+    ui->labelEleEyeTriggerPrintDelay->setEnabled(triggerMode == PRINT_TRIGGER_ELEC_EYE_VOLTATE_LEVEL || triggerMode == PRINT_TRIGGER_ELEC_EYE_EDGE || PRINT_TRIGGER_SYNCHRONIZER);
+    ui->checkBoxSynMakeClean->setEnabled(triggerMode == PRINT_TRIGGER_ELEC_EYE_VOLTATE_LEVEL || triggerMode == PRINT_TRIGGER_ELEC_EYE_EDGE);
+    ui->checkEyeTriggerSynPrintEn->setEnabled (triggerMode == PRINT_TRIGGER_ELEC_EYE_VOLTATE_LEVEL || triggerMode == PRINT_TRIGGER_ELEC_EYE_EDGE);
+    ui->labelEleMaskTime->setEnabled (triggerMode == PRINT_TRIGGER_ELEC_EYE_VOLTATE_LEVEL || triggerMode == PRINT_TRIGGER_ELEC_EYE_EDGE);
+    ui->spinBoxEleMaskTime->setEnabled (triggerMode == PRINT_TRIGGER_ELEC_EYE_VOLTATE_LEVEL || triggerMode == PRINT_TRIGGER_ELEC_EYE_EDGE);
+
+    if(sysPara->para.eleEyeTriggerSynPrintEn &&
+            (triggerMode == PRINT_TRIGGER_ELEC_EYE_VOLTATE_LEVEL || triggerMode == PRINT_TRIGGER_ELEC_EYE_EDGE)
+            )
+    {
+        //ui->radioButtonSynTrigger->setChecked(1);
+        ui->spinBoxSynTriggerPrintLen->setEnabled(0);
+        ui->labelSynTriggerPrintLen->setEnabled(1);
+        ui->lineEditTriggerPulsePerMm->setEnabled(1);
+        ui->labelTriggerPulsePerMm->setEnabled(1);
+        ui->spinBoxSynTriggerPrintLenRatio->setEnabled(1);
+        ui->labelSynTriggerPrintLenRatio->setEnabled(1);
+        ui->checkBoxEleEyeMakeClean->setEnabled(1);
+        ui->pushButtonApplyPulseFix->setEnabled(1);
+        ui->comboBoxSynPrintMode->setEnabled(1);
+        ui->labelSynPrintMode->setEnabled(1);
+        //ui->checkBoxAutoSpeedEN->setEnabled (1);
+        ui->labelEleMaskTime->setEnabled(1);
+        ui->spinBoxEleMaskTime->setEnabled(1);
+
+        //ui->spinBoxEleMaskTime->setEnabled(1);
+
+        ui->labelEleEyeTriggerPrintDelay->setText(tr("触发延时(毫米)"));
+        ui->labelEleEyeTriggerIntervalMs->setText(tr("重复间隔(毫米)"));
+        ui->labelEleMaskTime->setText(tr("封锁间隔(毫米)"));
+    }
+    else
+    {
+        ui->radioButtonSynTrigger->setChecked(triggerMode == PRINT_TRIGGER_SYNCHRONIZER);
+#ifndef NON_CABLE
+        ui->spinBoxSynTriggerPrintLen->setEnabled(triggerMode == PRINT_TRIGGER_SYNCHRONIZER);
+#endif
+        ui->labelSynTriggerPrintLen->setEnabled(triggerMode == PRINT_TRIGGER_SYNCHRONIZER);
+        ui->lineEditTriggerPulsePerMm->setEnabled(triggerMode == PRINT_TRIGGER_SYNCHRONIZER);
+        ui->labelTriggerPulsePerMm->setEnabled(triggerMode == PRINT_TRIGGER_SYNCHRONIZER);
+        ui->spinBoxSynTriggerPrintLenRatio->setEnabled(triggerMode == PRINT_TRIGGER_SYNCHRONIZER);
+        ui->labelSynTriggerPrintLenRatio->setEnabled(triggerMode == PRINT_TRIGGER_SYNCHRONIZER);
+        ui->checkBoxEleEyeMakeClean->setEnabled(triggerMode == PRINT_TRIGGER_SYNCHRONIZER);
+        ui->pushButtonApplyPulseFix->setEnabled(triggerMode == PRINT_TRIGGER_SYNCHRONIZER);
+        ui->comboBoxSynPrintMode->setEnabled(triggerMode == PRINT_TRIGGER_SYNCHRONIZER);
+        ui->labelSynPrintMode->setEnabled(triggerMode == PRINT_TRIGGER_SYNCHRONIZER);
+        //ui->checkBoxAutoSpeedEN->setEnabled (triggerMode == PRINT_TRIGGER_SYNCHRONIZER);
+        //ui->labelEleMaskTime->setEnabled(triggerMode == PRINT_TRIGGER_SYNCHRONIZER);
+        //ui->spinBoxEleMaskTime->setEnabled(triggerMode == PRINT_TRIGGER_SYNCHRONIZER);
+        if(triggerMode == PRINT_TRIGGER_SYNCHRONIZER)
+        {
+            ui->labelEleEyeTriggerPrintDelay->setText(tr("触发延时(毫米)"));
+        }
+        else
+        {
+            ui->labelEleEyeTriggerPrintDelay->setText(tr("触发延时(毫秒)"));
+        }
+        ui->labelEleEyeTriggerIntervalMs->setText(tr("重复间隔(毫秒)"));
+        ui->labelEleMaskTime->setText(tr("封锁时间(毫秒)"));
+    }
+    if(( ( //sysPara->para.eleEyeTriggerSynPrintEn ||
+           ui->checkEyeTriggerSynPrintEn->isChecked())
+         &&(triggerMode == PRINT_TRIGGER_ELEC_EYE_VOLTATE_LEVEL || triggerMode == PRINT_TRIGGER_ELEC_EYE_EDGE))
+            || triggerMode == PRINT_TRIGGER_SYNCHRONIZER  )
+    {
+        ui->labelOutputPulseDelayMs->setText(tr("延时(毫米):"));
+    }
+    else ui->labelOutputPulseDelayMs->setText(tr("延时(毫秒):"));
+
+    setSynPrintMode(sysPara->para.sysTriggerPrintMode);
+
+
+    //72版本禁用该输入框
+    //67打开
+    // if(triggerMode== PRINT_TRIGGER_SYNCHRONIZER){
+        // const unsigned short &FpgaVer=sysPara->status.build_dat.builTime;
+        // if(72==FpgaVer)
+        // {
+            // ui->spinBoxSynTriggerPrintLenRatio->setValue(0);
+            // ui->spinBoxSynTriggerPrintLenRatio->setEnabled(false);
+        // }
+        // else if(67==FpgaVer)
+        // {
+            // ui->spinBoxSynTriggerPrintLenRatio->setEnabled(true);
+        // }
+    // }
+    // else{
+        // ui->spinBoxSynTriggerPrintLenRatio->setValue(0);
+        // ui->spinBoxSynTriggerPrintLenRatio->setEnabled(false);
+    // }
+}
+
+void TriggerCtrl::setSynPrintMode(int mode){
+    ui->labelSynTriggerPrintLenRatio->setText((mode == SYN_PRINT_MODE_ACCORDING_CHAR_WIDTH)?tr("字符宽度"):tr("喷印比例(%)"));
+    ui->comboBoxSynPrintMode->setCurrentIndex(mode);
+    //ui->spinBoxSynTriggerPrintLenRatio->setValue((mode == SYN_PRINT_MODE_ACCORDING_CHAR_WIDTH)?sysPara->para.synCharWidthRatio:sysPara->para.synTriggerPrintLenRatio);
+    //edit@11-18
+    if(SYN_PRINT_MODE_ACCORDING_CHAR_WIDTH!=mode)
+    {
+        ui->spinBoxSynTriggerPrintLenRatio->setValue(sysPara->para.synTriggerPrintLenRatio);
+    }
+
+    const bool bShow=SYN_PRINT_MODE_ACCORDING_CHAR_WIDTH!=mode;
+    //隐藏文本框
+    ui->labelSynTriggerPrintLenRatio->setVisible(bShow);
+    //隐藏输入框
+    ui->spinBoxSynTriggerPrintLenRatio->setVisible(bShow);
+}
+
+void TriggerCtrl::GetTriggerUIPara(){
+    if(sysPara){
+        sysPara->para.printDelayMs = ui->spinBoxDelayTriggerValue->value();
+        sysPara->para.timeTriggerPrintMode = ui->comboBoxTimeTriggerMode->currentIndex();
+        sysPara->para.elecEyeTriggerInterval = ui->spinBoxEleEyeTriggerIntervalMs->value();
+        sysPara->para.photoElectricityRepeateNum = ui->spinBoxEleEyeTriggerRepeatCnt->value();
+
+        //
+        sysPara->para.synTriggerPrintLenMm = ui->spinBoxSynTriggerPrintLen->text().toFloat();
+        //sysPara->para.synTriggerPrintLenMm = ui->spinBoxSynTriggerPrintLen->value();
+#ifdef NON_CABLE
+        sysPara->para.synTriggerPrintLenMm = 255.0;
+        ui->spinBoxSynTriggerPrintLen->setText("255");
+#endif
+        sysPara->para.synPulseNumPerMm = ui->lineEditTriggerPulsePerMm->text().toFloat();
+
+        sysPara->para.sysTriggerPrintMode = ui->comboBoxSynPrintMode->currentIndex();
+        if(sysPara->para.sysTriggerPrintMode == SYN_PRINT_MODE_ACCORDING_CHAR_WIDTH)
+            //edit@11-19
+            ;//sysPara->para.synCharWidthRatio = ui->spinBoxSynTriggerPrintLenRatio->value();
+        else
+            sysPara->para.synTriggerPrintLenRatio = ui->spinBoxSynTriggerPrintLenRatio->value();
+
+        // 原代码：
+        //sysPara->para.AltMirrorGap =(unsigned int) ( ((unsigned int)ui->spinBoxAltMirrorGap->value()) & 0x7fff) | ( ui->comboBoxAltMirrType->currentIndex()==1?0x8000:0x0000);
+
+        // 20160303:
+        sysPara->para.AltMirrorGap =(unsigned int) ( ((unsigned int)ui->spinBoxAltMirrorGap->value()) & 0x0fff) |( ( ui->comboBoxAltMirrType->currentIndex())<<12 );
+
+        //qDebug()<< (sysPara->para.AltMirrorGap & 0x0fff) << (sysPara->para.AltMirrorGap & 0xf000);
+
+        if(ui->radioButtonDelayTrigger->isChecked())
+            sysPara->para.printTriggerMode = PRINT_TRIGGER_TIME;
+        else if(ui->radioButtonEleEyeLevelTrigger->isChecked())
+            sysPara->para.printTriggerMode = PRINT_TRIGGER_ELEC_EYE_VOLTATE_LEVEL;
+        else if(ui->radioButtonEleEyeEdgetTrigger->isChecked())
+            sysPara->para.printTriggerMode = PRINT_TRIGGER_ELEC_EYE_EDGE;
+        else if(ui->radioButtonSynTrigger->isChecked())
+            sysPara->para.printTriggerMode = PRINT_TRIGGER_SYNCHRONIZER;
+        else
+            sysPara->para.printTriggerMode = PRINT_TRIGGER_NONE;
+
+        sysPara->para.eleEyeTriggerSynPrintEn = ui->checkEyeTriggerSynPrintEn->isChecked ();
+        sysPara->para.eleEyeTriggerPrintDelay = ui->spinBoxEleEyeTriggerPrintDelay->value();
+        sysPara->para.synClearCntInEleEyeMode = ui->checkBoxSynMakeClean->isChecked();
+        sysPara->para.eleEyeClearCntInSynMode = (sysPara->para.eleEyeClearCntInSynMode & 0xf0) + ui->comboBoxEleEyeMakeClean->currentIndex();   //ui->checkBoxEleEyeMakeClean->isChecked();
+        //sysPara->para.autoSynSpeedEn = ui->checkBoxAutoSpeedEN->isChecked ();
+        sysPara->para.autoSynSpeedEn = 0;
+        //sysPara->para.synPulsePerMmX8 = (unsigned short)(sysPara->para.synPulseNumPerMm *256);
+        sysPara->para.synPulsePerMmX8 = (unsigned short)((unsigned int)sysPara->para.synPulseNumPerMm <<8);
+        sysPara->para.eleMaskTime = ui->spinBoxEleMaskTime->value();
+        //qDebug()<<"eleEyeClearCntInSynMode"<< sysPara->para.eleEyeClearCntInSynMode ;
+        sysPara->para.synchronizorActType = ui->comboBoxSyncActType->currentIndex();
+        //qDebug()<<"synchronizorActType"<< sysPara->para.synchronizorActType;
+
+        sysPara->para.pulse_sinal_value = ui->spinBoxpluseSinal->value();
+    }
+}
+void TriggerCtrl::TriggerupdateSysParaToUI(){
+    updateSysParaToUI();
+}
+
+void TriggerCtrl::updateSysParaToUI(){
+    if(sysPara)
+    {
+        /*----------------------------------------*/
+        setTriggerUI(sysPara->para.printTriggerMode);
+        ui->spinBoxDelayTriggerValue->setValue(sysPara->para.printDelayMs);
+#ifndef NON_CABLE
+        ui->comboBoxTimeTriggerMode->setCurrentIndex(sysPara->para.timeTriggerPrintMode);
+#endif
+        ui->spinBoxEleEyeTriggerIntervalMs->setValue(sysPara->para.elecEyeTriggerInterval);
+        ui->spinBoxOutputPulseDelayMs->setValue(sysPara->para.outputPulseDelayMs);
+        ui->spinBoxEleEyeTriggerRepeatCnt->setValue(sysPara->para.photoElectricityRepeateNum);
+
+        //ui->spinBoxSynTriggerPrintLen->setValue(sysPara->para.synTriggerPrintLenMm);
+        ui->spinBoxSynTriggerPrintLen->setText(QString::number(sysPara->para.synTriggerPrintLenMm));
+        ui->lineEditTriggerPulsePerMm->setText(QString::number(sysPara->para.synPulseNumPerMm));
+        if(sysPara->para.sysTriggerPrintMode == SYN_PRINT_MODE_ACCORDING_CHAR_WIDTH)
+            //edit@11-19
+            ;//ui->spinBoxSynTriggerPrintLenRatio->setValue(sysPara->para.synCharWidthRatio);
+        else
+            ui->spinBoxSynTriggerPrintLenRatio->setValue(sysPara->para.synTriggerPrintLenRatio);
+
+        /*----------------------------------------*/
+        ui->spinBoxEleEyeTriggerPrintDelay->setValue(sysPara->para.eleEyeTriggerPrintDelay);
+        ui->checkBoxSynMakeClean->setChecked(sysPara->para.synClearCntInEleEyeMode);
+        //ui->checkBoxEleEyeMakeClean->setChecked(sysPara->para.eleEyeClearCntInSynMode);
+        ui->comboBoxEleEyeMakeClean->setCurrentIndex( sysPara->para.eleEyeClearCntInSynMode & 0x0f);
+
+        ui->checkBoxPulseOutputEnable->setChecked(sysPara->para.pulseOutputEnable);
+        ui->labelProductCntPerOutputPulse->setEnabled(sysPara->para.pulseOutputEnable);
+        ui->spinBoxProductCntPerOutputPulse->setEnabled(sysPara->para.pulseOutputEnable);
+        ui->spinBoxProductCntPerOutputPulse->setValue(sysPara->para.productCntPerOutputPulse);
+
+        ui->labelOutputPulseDelayMs->setEnabled(sysPara->para.pulseOutputEnable);
+
+        //ui->spinBoxOutputPulseDelayMs->setEnabled(sysPara->para.pulseOutputEnable);
+
+        ui->spinBoxOutputPulseDelayMs->setEnabled(true /*sysPara->para.outputPulseDelayMs*/);
+        ui->spinBoxOuputPulseCol->setValue(sysPara->para.OuputPulseCol);
+        ui->checkEyeTriggerSynPrintEn->setChecked (sysPara->para.eleEyeTriggerSynPrintEn);
+        ui->comboBoxSyncActType->setCurrentIndex (sysPara->para.synchronizorActType);
+        //ui->checkBoxAutoSpeedEN->setChecked (sysPara->para.autoSynSpeedEn );
+        ui->spinBoxEleMaskTime->setValue(sysPara->para.eleMaskTime);
+
+        ui->spinBoxAltMirrorGap->setValue( sysPara->para.AltMirrorGap  & 0x0fff );
+
+        ui->comboBoxAltMirrType->setCurrentIndex( (sysPara->para.AltMirrorGap>>12) & 0x000F);
+        ui->spinBoxpluseSinal->setValue(sysPara->para.pulse_sinal_value);
+
+
+        //72版本禁用该输入框
+        //67打开
+    }
+}
+
+void TriggerCtrl::applyUIPara(){
+    if(sysPara){
+        GetTriggerUIPara();
+        if(sysPara->para.printTriggerMode == PRINT_TRIGGER_SYNCHRONIZER)
+        {
+            if( sysPara->para.synTriggerPrintLenMm < sysPara->para.eleEyeTriggerPrintDelay )
+            {
+                QMessageBox::information(this,tr("提示：参数不正确"),tr("要求：触发长度小于喷印间隔"));
+            }
+        }
+        sysPara->para.pulseOutputEnable = ui->checkBoxPulseOutputEnable->isChecked();
+        sysPara->para.productCntPerOutputPulse = ui->spinBoxProductCntPerOutputPulse->value();
+        sysPara->para.outputPulseDelayMs = ui->spinBoxOutputPulseDelayMs->value();
+        sysPara->para.OuputPulseCol = ui->spinBoxOuputPulseCol->value();
+        if(( ( //sysPara->para.eleEyeTriggerSynPrintEn ||
+               ui->checkEyeTriggerSynPrintEn->checkState()==1 )
+             &&(sysPara->para.printTriggerMode == PRINT_TRIGGER_ELEC_EYE_VOLTATE_LEVEL || sysPara->para.printTriggerMode == PRINT_TRIGGER_ELEC_EYE_EDGE))
+                || sysPara->para.printTriggerMode == PRINT_TRIGGER_SYNCHRONIZER  )
+        {
+            ui->labelOutputPulseDelayMs->setText(tr("延时(毫米):"));
+        }
+        else ui->labelOutputPulseDelayMs->setText(tr("延时(毫秒):"));
+#ifdef DEBUG1
+        qDebug()<<"TriggerCtrl::applyUIPara"<<"1";
+#endif
+        if(sysPara->devOp->writeFpgaPrintPara() != -1)
+            QMessageBox::information(this,tr("提示"),tr("应用成功"));
+#ifdef DEBUG1
+        qDebug()<<"TriggerCtrl::applyUIPara"<<"3";
+#endif
+
+    }
+}
+
+void TriggerCtrl::updateSysStatusToUI(){
+    static char t_init = 0;
+    if(sysPara){
+        if(t_init == 0){
+            sysPara->loadParaFromFile();
+            //qDebug()<<"sysPara->para.pulse_sinal_value="<<sysPara->para.pulse_sinal_value;
+            ui->spinBoxpluseSinal->setValue(sysPara->para.pulse_sinal_value);
+            t_init = 1;
+        }
+        //        if((sysPara->para.printTriggerMode == PRINT_TRIGGER_SYNCHRONIZER))
+        //        {
+        //           ui->lineEditPulseCount ->setText(QString::number((int )((sysPara->para.synTriggerPrintLenMm)*sysPara->para.synPulseNumPerMm)));
+        //        }
+        //        else if(((sysPara->para.printTriggerMode == PRINT_TRIGGER_ELEC_EYE_VOLTATE_LEVEL
+        //                ||sysPara->para.printTriggerMode == PRINT_TRIGGER_ELEC_EYE_EDGE)
+        //                && sysPara->para.eleEyeTriggerSynPrintEn))
+        //        {
+        //           ui->lineEditPulseCount ->setText(QString::number( (int )((sysPara->para.elecEyeTriggerInterval)*sysPara->para.synPulseNumPerMm)));
+        //        }
+    }
+}
+
+void TriggerCtrl::on_checkEyeTriggerSynPrintEn_pressed()
+{
+#if 0
+    int triggerMode = sysPara->para.printTriggerMode;
+    if(sysPara)
+    {
+        //if( !sysPara->para.eleEyeTriggerSynPrintEn )
+        if( !ui->checkEyeTriggerSynPrintEn->isChecked() )
+        {
+            //ui->radioButtonSynTrigger->setChecked(1);
+
+            ui->spinBoxSynTriggerPrintLen->setEnabled(1);
+            ui->labelSynTriggerPrintLen->setEnabled(1);
+            ui->lineEditTriggerPulsePerMm->setEnabled(1);
+            ui->labelTriggerPulsePerMm->setEnabled(1);
+            ui->spinBoxSynTriggerPrintLenRatio->setEnabled(1);
+            ui->labelSynTriggerPrintLenRatio->setEnabled(1);
+            ui->checkBoxEleEyeMakeClean->setEnabled(1);
+            ui->pushButtonApplyPulseFix->setEnabled(1);
+            ui->comboBoxSynPrintMode->setEnabled(1);
+            ui->labelSynPrintMode->setEnabled(1);
+            ui->checkBoxAutoSpeedEN->setEnabled (1);
+            ui->spinBoxEleEyeTriggerIntervalMs->setEnabled(0);
+            ui->labelEleEyeTriggerPrintDelay->setText(tr("触发延时(毫米)"));
+            ui->labelEleEyeTriggerIntervalMs->setText(tr("重复间隔(毫米)"));
+            ui->labelOutputPulseDelayMs->setText("延时(毫米):");
+            if(ui->checkBoxpausePrintSyncInv->isChecked())
+            {
+                ui->checkBoxpausePrintSyncInv->setChecked(false);
+            }
+        }
+        else
+        {
+            ui->radioButtonSynTrigger->setChecked(triggerMode == PRINT_TRIGGER_SYNCHRONIZER);
+            ui->spinBoxSynTriggerPrintLen->setEnabled(triggerMode == PRINT_TRIGGER_SYNCHRONIZER);
+            ui->labelSynTriggerPrintLen->setEnabled(triggerMode == PRINT_TRIGGER_SYNCHRONIZER);
+            ui->lineEditTriggerPulsePerMm->setEnabled(triggerMode == PRINT_TRIGGER_SYNCHRONIZER);
+            ui->labelTriggerPulsePerMm->setEnabled(triggerMode == PRINT_TRIGGER_SYNCHRONIZER);
+            ui->spinBoxSynTriggerPrintLenRatio->setEnabled(triggerMode == PRINT_TRIGGER_SYNCHRONIZER);
+            ui->labelSynTriggerPrintLenRatio->setEnabled(triggerMode == PRINT_TRIGGER_SYNCHRONIZER);
+            ui->checkBoxEleEyeMakeClean->setEnabled(triggerMode == PRINT_TRIGGER_SYNCHRONIZER);
+            ui->pushButtonApplyPulseFix->setEnabled(triggerMode == PRINT_TRIGGER_SYNCHRONIZER);
+            ui->comboBoxSynPrintMode->setEnabled(triggerMode == PRINT_TRIGGER_SYNCHRONIZER);
+            ui->labelSynPrintMode->setEnabled(triggerMode == PRINT_TRIGGER_SYNCHRONIZER);
+            ui->checkBoxAutoSpeedEN->setEnabled (triggerMode == PRINT_TRIGGER_SYNCHRONIZER);
+            //ui->spinBoxEleEyeTriggerIntervalMs->setEnabled(triggerMode == PRINT_TRIGGER_SYNCHRONIZER);
+            ui->spinBoxEleEyeTriggerIntervalMs->setEnabled(1);
+            ui->labelEleEyeTriggerPrintDelay->setText(tr("触发延时(毫秒)"));
+            ui->labelEleEyeTriggerIntervalMs->setText(tr("重复间隔(毫秒)"));
+            ui->labelOutputPulseDelayMs->setText(  ui->radioButtonSynTrigger->isChecked()?"延时(毫米):":"延时(毫秒):");
+
+        }
+        // sysPara->para.eleEyeTriggerSynPrintEn=!sysPara->para.eleEyeTriggerSynPrintEn;
+    }
+#endif
+}
+
+void TriggerCtrl::on_radioButtonDelayTrigger_pressed()
+{
+    setTriggerUI(PRINT_TRIGGER_TIME);
+//    emit synDisableFontWidth(false);
+}
+
+void TriggerCtrl::on_radioButtonEleEyeEdgetTrigger_pressed()
+{
+    setTriggerUI(PRINT_TRIGGER_ELEC_EYE_EDGE);
+//    emit synDisableFontWidth(false);
+}
+
+void TriggerCtrl::on_radioButtonEleEyeLevelTrigger_pressed()
+{
+    setTriggerUI(PRINT_TRIGGER_ELEC_EYE_VOLTATE_LEVEL);
+//    emit synDisableFontWidth(false);
+}
+
+void TriggerCtrl::on_radioButtonSynTrigger_pressed()
+{
+    //edit@11-19
+    sysPara->para.printTriggerMode = PRINT_TRIGGER_SYNCHRONIZER;
+    setTriggerUI(PRINT_TRIGGER_SYNCHRONIZER);
+//    const unsigned short &FpgaVer=sysPara->status.build_dat.builTime;
+//    //72版本禁用字符宽度
+//    if(72 == FpgaVer){
+//        ui->spinBoxSynTriggerPrintLenRatio->setValue(0);
+//        ui->spinBoxSynTriggerPrintLenRatio->setEnabled(0);
+//    }else if (67 == FpgaVer)
+//        ui->spinBoxSynTriggerPrintLenRatio->setEnabled(1);
+//    emit synDisableFontWidth(true);
+}
+
+void TriggerCtrl::on_pushButtonApplyPulseFix_clicked()
+{
+    pulseNumFix->bindSysPara(sysPara);
+    pulseNumFix->hide();
+    pulseNumFix->show();
+}
+
+void TriggerCtrl::onPulseNumFixDone(float value){
+    ui->lineEditTriggerPulsePerMm->setText(QString::number(value));
+}
+
+void TriggerCtrl::on_comboBoxSynPrintMode_currentIndexChanged(int index)
+{
+    setSynPrintMode(index);
+}
+void TriggerCtrl::on_pushButtonApply_pressed()
+{
+    applyUIPara();
+    if(sysPara)sysPara->saveParaToFile ();
+    emit autoUpdateFontWidthByTriggerCtrl(sysPara->status.textEditTotalCol);
+    TriggerCtrlLog();
+}
+
+void TriggerCtrl::TriggerCtrlLog(){
+
+    qDebug()<<QString("TriggerCtrl  触发模式: %1").arg(sysPara->para.printTriggerMode);
+    qDebug()<<QString("TriggerCtrl  脉冲数/毫米: %1").arg(ui->lineEditTriggerPulsePerMm->text().toFloat());
+    qDebug()<<QString("TriggerCtrl  喷印间隔(毫米): %1").arg(ui->spinBoxSynTriggerPrintLen->text().toFloat());
+    qDebug()<<QString("TriggerCtrl  同步喷印模式: %1").arg(ui->comboBoxSynPrintMode->currentIndex());
+    qDebug()<<QString("TriggerCtrl  字符宽度: %1").arg(ui->spinBoxSynTriggerPrintLenRatio->value());
+    qDebug()<<QString("TriggerCtrl  电眼控制: %1").arg(ui->comboBoxEleEyeMakeClean->currentIndex());
+    qDebug()<<QString("TriggerCtrl  镜象交替类型: %1").arg(ui->comboBoxAltMirrType->currentIndex());
+    qDebug()<<QString("TriggerCtrl  镜像交替间隔: %1").arg(ui->spinBoxAltMirrorGap->value());
+    qDebug()<<QString("TriggerCtrl  脉冲信号值: %1").arg(ui->spinBoxpluseSinal->value());
+    qDebug()<<QString("TriggerCtrl  重复次数: %1").arg(ui->spinBoxEleEyeTriggerRepeatCnt->value());
+    qDebug()<<QString("TriggerCtrl  重复间隔(毫秒): %1").arg(ui->spinBoxEleEyeTriggerIntervalMs->value());
+    qDebug()<<QString("TriggerCtrl  同步打印: %1").arg(ui->checkEyeTriggerSynPrintEn->isChecked ());
+    qDebug()<<QString("TriggerCtrl  触发延时(毫秒): %1").arg(ui->spinBoxEleEyeTriggerPrintDelay->value());
+    qDebug()<<QString("TriggerCtrl  封锁时间(毫秒): %1").arg(ui->spinBoxEleMaskTime->value());
+    qDebug()<<QString("TriggerCtrl  同步器清零: %1").arg(ui->checkBoxSynMakeClean->isChecked());
+    qDebug()<<QString("TriggerCtrl  重复间隔(毫秒): %1").arg(ui->spinBoxDelayTriggerValue->value());
+    qDebug()<<QString("TriggerCtrl  间隔模式: %1").arg(ui->comboBoxTimeTriggerMode->currentIndex());
+    qDebug()<<QString("TriggerCtrl  同步器正反转打印: %1").arg(ui->comboBoxSyncActType->currentIndex());
+    qDebug()<<QString("TriggerCtrl  产生脉冲所需计数: %1").arg(ui->spinBoxProductCntPerOutputPulse->value());
+    qDebug()<<QString("TriggerCtrl  延时(毫秒): %1").arg(ui->spinBoxOutputPulseDelayMs->value());
+    qDebug()<<QString("TriggerCtrl  脉冲输出使能: %1").arg(ui->checkBoxPulseOutputEnable->isChecked());
+
+
+}
+
+void TriggerCtrl::on_checkBoxPulseOutputEnable_clicked()
+{
+    bool checked = ui->checkBoxPulseOutputEnable->isChecked();
+    ui->labelProductCntPerOutputPulse->setEnabled(checked);
+    ui->spinBoxProductCntPerOutputPulse->setEnabled(checked);
+    //ui->labelOutputPulseDelayMs->setEnabled(checked);
+    //ui->spinBoxOutputPulseDelayMs->setEnabled(checked);
+}
+
+void TriggerCtrl::setBuildTime(QString s1)
+{
+    QString s;
+
+#if 0 /* roger use new Version manage,so delete it */
+    s.sprintf(" %s ",__TIME__);
+    s = (QString) Public::DateToString(__DATE__)+s + BVER;
+#else
+    s.sprintf("%d.%d.%02d_GuiL_", UP_PRINTER_MAJOR_VER, UP_PRINTER_MINOR_VER,UP_PRINTER_RIVISION_VER);
+    s = s + (QString) Public::DateToString(__DATE__)+ "_"+ QString(__TIME__)+"_"+UP_PRINTER_STAGE_VER;
+    //  s = s + BVER;
+#endif
+    ui->test_version->setText(s+s1);
+
+    //ui->test_version->setText (BUILD_DATE+s);
+
+}
+
+void TriggerCtrl::on_checkEyeTriggerSynPrintEn_clicked(bool checked)
+{
+    int triggerMode = sysPara->para.printTriggerMode;
+    if(sysPara)
+    {
+        //if( !sysPara->para.eleEyeTriggerSynPrintEn )
+        if( checked)
+        {
+            //ui->radioButtonSynTrigger->setChecked(1);
+#ifndef NON_CABLE
+            ui->spinBoxSynTriggerPrintLen->setEnabled(1);
+#endif
+            ui->labelSynTriggerPrintLen->setEnabled(1);
+            ui->lineEditTriggerPulsePerMm->setEnabled(1);
+            ui->labelTriggerPulsePerMm->setEnabled(1);
+            ui->spinBoxSynTriggerPrintLenRatio->setEnabled(1);
+            ui->labelSynTriggerPrintLenRatio->setEnabled(1);
+            ui->checkBoxEleEyeMakeClean->setEnabled(1);
+            ui->pushButtonApplyPulseFix->setEnabled(1);
+            ui->comboBoxSynPrintMode->setEnabled(1);
+            ui->labelSynPrintMode->setEnabled(1);
+            //ui->checkBoxAutoSpeedEN->setEnabled (1);
+            ui->spinBoxEleEyeTriggerIntervalMs->setEnabled(0);
+            ui->labelEleEyeTriggerPrintDelay->setText(tr("触发延时(毫米)"));
+            ui->labelEleEyeTriggerIntervalMs->setText(tr("重复间隔(毫米)"));
+            ui->labelEleMaskTime->setText(tr("封锁间隔(毫米)"));
+            ui->labelOutputPulseDelayMs->setText(tr("延时(毫米):"));
+            if(ui->comboBoxSyncActType->currentIndex() || 0b11) //如果不是在正反转打印的模式下，就切换到正反转模式
+            {
+                ui->comboBoxSyncActType->setCurrentIndex(0);
+            }
+        }
+        else
+        {
+            ui->radioButtonSynTrigger->setChecked(triggerMode == PRINT_TRIGGER_SYNCHRONIZER);
+#ifndef NON_CABLE
+            ui->spinBoxSynTriggerPrintLen->setEnabled(triggerMode == PRINT_TRIGGER_SYNCHRONIZER);
+#endif
+            ui->labelSynTriggerPrintLen->setEnabled(triggerMode == PRINT_TRIGGER_SYNCHRONIZER);
+            ui->lineEditTriggerPulsePerMm->setEnabled(triggerMode == PRINT_TRIGGER_SYNCHRONIZER);
+            ui->labelTriggerPulsePerMm->setEnabled(triggerMode == PRINT_TRIGGER_SYNCHRONIZER);
+            ui->spinBoxSynTriggerPrintLenRatio->setEnabled(triggerMode == PRINT_TRIGGER_SYNCHRONIZER);
+            ui->labelSynTriggerPrintLenRatio->setEnabled(triggerMode == PRINT_TRIGGER_SYNCHRONIZER);
+            ui->checkBoxEleEyeMakeClean->setEnabled(triggerMode == PRINT_TRIGGER_SYNCHRONIZER);
+            ui->pushButtonApplyPulseFix->setEnabled(triggerMode == PRINT_TRIGGER_SYNCHRONIZER);
+            ui->comboBoxSynPrintMode->setEnabled(triggerMode == PRINT_TRIGGER_SYNCHRONIZER);
+            ui->labelSynPrintMode->setEnabled(triggerMode == PRINT_TRIGGER_SYNCHRONIZER);
+            //ui->checkBoxAutoSpeedEN->setEnabled (triggerMode == PRINT_TRIGGER_SYNCHRONIZER);
+            //ui->spinBoxEleEyeTriggerIntervalMs->setEnabled(triggerMode == PRINT_TRIGGER_SYNCHRONIZER);
+            ui->spinBoxEleEyeTriggerIntervalMs->setEnabled(1);
+            ui->labelEleEyeTriggerPrintDelay->setText(tr("触发延时(毫秒)"));
+            ui->labelEleEyeTriggerIntervalMs->setText(tr("重复间隔(毫秒)"));
+            ui->labelEleMaskTime->setText(tr("封锁间隔(毫秒)"));
+            ui->labelOutputPulseDelayMs->setText(  ui->radioButtonSynTrigger->isChecked()?tr("延时(毫米):"):tr("延时(毫秒):"));
+
+        }
+    }
+}
+
+void TriggerCtrl::on_comboBoxSyncActType_activated(int index)
+{
+    if(index>0)
+    {
+        on_checkEyeTriggerSynPrintEn_clicked(false);
+    }
+}
+
+
+void TriggerCtrl::on_lineEditTriggerPulsePerMm_textChanged(const QString &arg1)
+{
+    Q_UNUSED(arg1);
+    sysPara->para.synPulseNumPerMm = ui->lineEditTriggerPulsePerMm->text().toFloat();
+}
+void TriggerCtrl::on_spinBoxSynTriggerPrintLen_textChanged(const QString &arg1)
+{
+    Q_UNUSED(arg1);
+    //sysPara->para.synTriggerPrintLenMm = ui->spinBoxSynTriggerPrintLen->text().toFloat();
+
+}
+
+//void TriggerCtrl::on_spinBoxEleEyeTriggerIntervalMs_valueChanged(int arg1)
+//{
+//    sysPara->para.elecEyeTriggerInterval = arg1;
+//}
+
+// //2020/3/2
+// void TriggerCtrl::on_radioButtonSynTrigger_clicked()
+// {
+    // sysPara->para.printTriggerMode = PRINT_TRIGGER_SYNCHRONIZER;
+    // sysPara->para.printColDelay = 0;
+// }
+
+void TriggerCtrl::on_radioButtonEleEyeLevelTrigger_clicked()
+{
+    sysPara->para.printTriggerMode = PRINT_TRIGGER_ELEC_EYE_VOLTATE_LEVEL;
+}
+
+void TriggerCtrl::on_radioButtonEleEyeEdgetTrigger_clicked()
+{
+    sysPara->para.printTriggerMode = PRINT_TRIGGER_ELEC_EYE_EDGE;
+}
+
+void TriggerCtrl::on_radioButtonDelayTrigger_clicked()
+{
+    sysPara->para.printTriggerMode = PRINT_TRIGGER_TIME;
+}
+
+
+
+#define PRINT_CTRL_ADDR_BASE	0xa400
+typedef struct pulse_struct {
+    unsigned int pulse_value:16;
+}Pulse_struct;
+
+void TriggerCtrl::on_spinBoxpluseSinal_valueChanged(int arg1)
+{
+    Pulse_struct t_pulse_struct;
+    sysPara->para.pulse_sinal_value = arg1;
+    t_pulse_struct.pulse_value = arg1*10*ui->lineEditTriggerPulsePerMm->text().toFloat();
+    sysPara->devOp->fpgaWr(PRINT_CTRL_ADDR_BASE + 0x88, (unsigned char *)&t_pulse_struct, 2);
+}
+
+void TriggerCtrl::OutputPulse()
+{
+    ui->checkBoxPulseOutputEnable->setChecked(true);
+    ui->spinBoxProductCntPerOutputPulse->setEnabled(true);
+    ui->spinBoxProductCntPerOutputPulse->setValue(sysPara->para.productCntPerOutputPulse);
+}