#include "MainInstruction.h"
#include "ui_MainInstruction.h"
#include <QMessageBox>
#include <QDebug>
#include "DlgRFIDConfig.h"

MainInstruction::MainInstruction(QWidget *parent) :
    QWidget(parent),
    ui(new Ui::MainInstruction)
{
    ui->setupUi(this);

    m_graphicsEditor = new ZkEdit();

    // 连接几个特殊按钮，这些按钮将由外部处理
    connect(ui->closeBtn, &QPushButton::clicked, this, std::bind(&MainInstruction::onSpecialButtonClicked, this, 1));
    connect(ui->sysMgtBtn, &QPushButton::clicked, this, std::bind(&MainInstruction::onSpecialButtonClicked, this, 2));
    connect(ui->sysSetBtn, &QPushButton::clicked, this, std::bind(&MainInstruction::onSpecialButtonClicked, this, 3));
    connect(ui->otherSetBtn, &QPushButton::clicked, this, std::bind(&MainInstruction::onSpecialButtonClicked, this, 4));
    connect(ui->sysUpdateBtn,&QPushButton::clicked, this, std::bind(&MainInstruction::onSpecialButtonClicked, this, 5));

    // 其他信号槽连接在ui文件中

    dlgInputAddr = new DlgInputAddr(parent);
    dialogAuthorization = new DialogAuthorization(parent);
    dlgRfidConfig = new DlgRFIDConfig(this);

    connect(dlgRfidConfig, &DlgRFIDConfig::accepted, this, &MainInstruction::onRFIDAutoConfirmTimeoutChanged);

    dlgInputAddr->GetAddr();
    dlgInputAddr->vpnConnect();
    dlgInputAddr->hide();

    dialogMaintenanceTimeSettingAuth = new DialogAuthorization;
    connect(dialogMaintenanceTimeSettingAuth,SIGNAL(accepted()),this,SLOT(onDlgAuthMaintenanceTimeAccepted()));

    connect(dialogAuthorization,SIGNAL(accepted()),this,SLOT(ondialogAuthorizationAccepted()));

    MTimeSetting = new DialogMaintenanceTimeSetting(this);
    connect(MTimeSetting,SIGNAL(accepted()),this,SLOT(onMTimeSettingAccepted()));


    applyStyleSheet();
}

MainInstruction::~MainInstruction()
{
    delete ui;
    delete m_graphicsEditor;
}

void MainInstruction::bindSysPara(SysPara *sysPara){
    this->sysPara = sysPara;
}

void MainInstruction::onGraphicsEditBtnClicked()
{
    // 在arm主机上以全屏模式显示，而在x86上无所谓
#if defined(ARCH_AARCH64_GNU)
    m_graphicsEditor->showFullScreen();
#else
    m_graphicsEditor->show();
#endif
}

void MainInstruction::onSpecialButtonClicked(int btnID)
{
    emit sendButtonClickedSignal(btnID);
}

void MainInstruction::on_createNewFileBtn_clicked()
{
    emit newFileBtnClick();
}

void MainInstruction::on_maintenanceIntervalBtn_clicked()
{
    //    dialogMaintenanceTimeSettingAuth->clearAuth();
    //    dialogMaintenanceTimeSettingAuth->show();

    onDlgAuthMaintenanceTimeAccepted();
}


void MainInstruction::onDlgAuthMaintenanceTimeAccepted(){
    //    QString authString= dialogMaintenanceTimeSettingAuth->getAuth();
    //    if(dlgInputAddr->checWhJmDate(authString)) // 0xa001
    //    {
    QDate curDate = QDate::currentDate();
    QString mtEndDatestr = "20" + QString::number(sysPara->RFIDPara.maintenanceEndDate);
    QDate mtEndDate = QDate::fromString(mtEndDatestr,"yyyyMMdd");
    int timeoutDay = curDate.daysTo(mtEndDate);
    MTimeSetting->updateMaintenanceTime(QString("%1 Days").arg(timeoutDay));
    MTimeSetting->updateMaintenanceIntervalToUI(sysPara->RFIDPara.maintenanceInterval);
    MTimeSetting->disableMaintenanceTimeSet(false);
    MTimeSetting->show();
    //    }else
    //    {
    //        QMessageBox::about(this, tr("提示"), tr("密码不正确！"));
    //        return;
    //    }
}

void MainInstruction::maintenanceDialogShow(){
    QDate curDate = QDate::currentDate();
    QString mtEndDatestr = "20" + QString::number(sysPara->RFIDPara.maintenanceEndDate);
    QDate mtEndDate = QDate::fromString(mtEndDatestr,"yyyyMMdd");
    int timeoutDay = curDate.daysTo(mtEndDate);
    MTimeSetting->updateMaintenanceTime(QString("%1 Days").arg(timeoutDay));
    MTimeSetting->updateMaintenanceIntervalToUI(sysPara->RFIDPara.maintenanceInterval);
    MTimeSetting->disableMaintenanceTimeSet(true);
    MTimeSetting->show();
}

void MainInstruction::onMTimeSettingAccepted(){
    sysPara->RFIDPara.maintenanceInterval = MTimeSetting->getInterval();
    if(MTimeSetting->getResetSchedule()){
        QDate curDate = QDate::currentDate();
        int curdate = curDate.toString("yyMMdd").toInt();
        sysPara->RFIDPara.maintenanceDate = curdate;
    }
    QString mtDatestr = QString::number(sysPara->RFIDPara.maintenanceDate);
    QDate mtDate = QDate::fromString(mtDatestr,"yyMMdd");
    QDate mtEndDate = mtDate.addMonths(sysPara->RFIDPara.maintenanceInterval);
    sysPara->RFIDPara.maintenanceEndDate = mtEndDate.toString("yyMMdd").toInt();
    LogInfo::setRunStatusText(tr("mtDate1: %1").arg(sysPara->RFIDPara.maintenanceDate));
    LogInfo::setRunStatusText(tr("mtInterval1: %1").arg(sysPara->RFIDPara.maintenanceInterval));
    LogInfo::setRunStatusText(tr("mtEndDate1: %1").arg(sysPara->RFIDPara.maintenanceEndDate));
    LogInfo::setRunStatusText(tr("mtFlog1: %1").arg(sysPara->RFIDPara.needMaintenance));
    sysPara->saveRFIDPara();
}

void MainInstruction::ondialogAuthorizationAccepted(){

    QString authString = dialogAuthorization->getAuth();

    if((authString.left(4) == "nnyp") && ( dlgInputAddr->checkSupperJm(authString.mid(4))))
    {
#ifdef __RFID_CARD
        /**********超级密码，除了维护时间的3个参数，其他参数清零*****************/
        unsigned int mtDate = sysPara->RFIDPara.maintenanceDate;
        unsigned int mtInterval = sysPara->RFIDPara.maintenanceInterval;
        unsigned int mtEndDate = sysPara->RFIDPara.maintenanceEndDate;
        qDebug()<<"mtDate2: "<<sysPara->RFIDPara.maintenanceDate;
        qDebug()<<"mtInterval2: "<<sysPara->RFIDPara.maintenanceInterval;
        qDebug()<<"mtEndDate2: "<<sysPara->RFIDPara.maintenanceEndDate;
        memset(&sysPara->RFIDPara,0,sizeof(sysPara->RFIDPara));
        sysPara->RFIDPara.maintenanceDate = mtDate;
        sysPara->RFIDPara.maintenanceInterval = mtInterval;
        sysPara->RFIDPara.maintenanceEndDate = mtEndDate;
        qDebug()<<"mtDate3: "<<sysPara->RFIDPara.maintenanceDate;
        qDebug()<<"mtInterval3: "<<sysPara->RFIDPara.maintenanceInterval;
        qDebug()<<"mtEndDate3: "<<sysPara->RFIDPara.maintenanceEndDate;
        sysPara->saveRFIDPara();
        QMessageBox::warning(0,tr("提示"),tr("RFID卡清零!") );
        sysPara->para.flagOfInkWarning = false;
        sysPara->para.flagOfSolventWarning = false;
        sysPara->status.needMaintenanceRemind = false;
        sysPara->para.inkWarnDate = 0;
        sysPara->para.inkWarnTime = 0;
        sysPara->para.solventWarnDate = 0;
        sysPara->para.solventWarnTime = 0;
        sysPara->saveParaToFile();
#endif
    }
    else if( dlgInputAddr->checkSupperJm(authString))
    {
        sysPara->status.WorkTimeOut=0;
        dlgInputAddr->ReadJm();
        dlgInputAddr->show();
        //   ui->labMac->setText(QString("Mac:%1").arg(dlgInputAddr->jd.addr));
    }

}

void MainInstruction::on_pushButtonAuth_clicked()
{
    dialogAuthorization->clearAuth();
    dialogAuthorization->show();
}


void MainInstruction::on_btn_time_clicked()
{
    QTime tm = QTime::currentTime();
    QDate date = QDate::currentDate();
    timeDia.setYear(date.year());
    timeDia.setMonth(date.month());
    timeDia.setDay(date.day());
    timeDia.setHour(tm.hour());
    timeDia.setMinute(tm.minute());
    timeDia.setSecond(tm.second());
    timeDia.hide();
    timeDia.show();
    connect(&timeDia,SIGNAL(accepted()),this,SLOT(slt_timeSetting()));
}

#include <time.h>
void m_adjustdate(int year, int mon, int mday, int hour, int min, int sec) {
    time_t t;
    struct tm nowtime;
    nowtime.tm_sec = sec;      // Seconds.[0-60]       (1 leap second)
    nowtime.tm_min = min;      // Minutes.[0-59]
    nowtime.tm_hour = hour;     //  Hours.   [0-23]
    nowtime.tm_mday = mday;     //  Day.[1-31]
    nowtime.tm_mon = mon - 1;    //   Month.   [0-11]
    nowtime.tm_year = year - 1900;  //     Year-       1900.
    nowtime.tm_isdst = -1;      // DST.[-1/0/1]
    t = mktime(&nowtime);

#if __GLIBC_MINOR__ >= 31
    struct timespec res;
    res.tv_sec = t;
    clock_settime(CLOCK_REALTIME, &res);
#else
    stime(&t);
#endif
}

uint8_t m_datatime[8] = {};
void MainInstruction::slt_timeSetting()
{
    m_adjustdate(timeDia.getYear(), timeDia.getMonth(),
                 timeDia.getDay(), timeDia.getHour(),
                 timeDia.getMinute(), timeDia.getSecond());

    QDate date(timeDia.getYear(), timeDia.getMonth(), timeDia.getDay());
    int dayOfWeek = date.dayOfWeek();
    QString YearStr = QString::number(timeDia.getYear());
    int Year1 = YearStr.mid(0,2).toInt();
    int Year2  = YearStr.mid(2,2).toInt();
    uint8_t year1 = Year1;
    m_datatime[0] = year1;
    uint8_t year2 = Year2;
    m_datatime[1] = year2;
    uint8_t month = timeDia.getMonth();
    m_datatime[2] = month;
    uint8_t day = timeDia.getDay();
    m_datatime[3] = day;
    uint8_t  week= dayOfWeek;
    m_datatime[4] = week;
    uint8_t hour = timeDia.getHour();
    m_datatime[5] = hour;
    uint8_t  minute= timeDia.getMinute();
    m_datatime[6] = minute;
    uint8_t  second= timeDia.getSecond();
    m_datatime[7] = second;

    sysPara->devOp->stm32Wr(0xA1,(unsigned char *)m_datatime,8);
}

void MainInstruction::onRfidCfgBtnClicked()
{
    dlgRfidConfig->setAutoConfirmTimeout(sysPara->para.rfidCountDown);
    dlgRfidConfig->show();
}

void MainInstruction::onRFIDAutoConfirmTimeoutChanged()
{
    sysPara->para.rfidCountDown = dlgRfidConfig->autoConfirmTimeout();
    qInfo() << "RFID auto confirm timeout: " << sysPara->para.rfidCountDown;
    sysPara->saveRFIDPara();
}

void MainInstruction::applyStyleSheet()
{
    QString styleSheet =
            R"(
            QWidget#buttonWidget {
            background-color: #95989D;
            }

            QPushButton#closeBtn {
            background-color: #E6F7FF;
            border: 1px solid #87CEEB;
            border-radius: 4px;
            font-size: 24px;
            color: #228B22;
            }

            QPushButton#closeBtn:hover {
            background-color: #D1E9FF;
            }

            QPushButton#closeBtn:pressed {
            background-color: #BAE7FF;
            }

            QLabel {
            font-size: 18px;
            color: #000000;
            font-weight: 500;
            }

            QCheckBox {
            font-size: 18px;
            color: #000000;
            font-weight:500;
            }

            QCheckBox::indicator {
            width: 18px;
            height: 18px;
            border: 1px solid #96A0A9;
            border-radius: 10px;
            background-color: #ffffff;
            }

            QCheckBox::indicator:checked {
            background-color: #95B2D4;
            border-color: #95B2D4;
            image: url(:/Demo/image/select.png);
            }

            QPushButton {
            background-color: #5396C1;
            color: #ffffff;
            border: 1px solid #000000;
            border-radius: 3px;
            font-size: 18px;
            font-weight:500;
            width: 180px;
            height: 90px;
            }

            QPushButton:hover {
            background-color: #5396C1;
            }

            QPushButton:disabled {
            background-color: #7C828E;
            color: #606060;
            border-color: #808080;
            }

            QWidget#fileTab, QWidget#extraTab, QWidget#settingsTab, QWidget#serviceTab {
            background-color: #E3E7EC;
            }

            QTabWidget::pane {
            border: 1px solid #dddddd;
            background-color: #ffffff;
            }

            QTabWidget::tab-bar {
            top: -3px;
            left: 10px;
            }

            QTabBar::tab {
            min-width: 90px;
            min-height: 45px;
            padding: 4px 10px;
            margin-right: 4px;
            border: 1px solid #dddddd;
            border-bottom: none;
            border-top-left-radius: 4px;
            border-top-right-radius: 4px;
            background-color: #5396C1;
            color: #ffffff;
            }

            QTabBar::tab:selected {
            background-color: #6bb1e0;
            color: #ffffff;
            box-shadow: 0 -3px 8px rgba(44, 125, 232, 0.25);
            }

            QTabBar::tab:focus {
            outline: none;
            }

            )";

    this->setStyleSheet(styleSheet);
}