/*
 * SysPara.cpp
 *
 *  Created on: Jun 25, 2013
 *      Author: yiyu
 *  QQ:1036184468
 *  Descriptoin:
 *
 *  2013-9-29   高压
 */


#include "SysPara.h"
#include <string.h>
#include <QFile>
#include <QIODevice>
#include <QDir>
#include <QMessageBox>
#include <QDebug>
//#include <qobject.h>
#include "LogInfo.h"
#include "DevOp.h"
#include <unistd.h>
#include<iostream>
#include<string>

#define VNLG
SysPara::SysPara(void):
	devOp(new DevOp(this)){
    memset(&para,0,sizeof(para));
    memset(&status,0,sizeof(status));
    //qDebug("start to  loadParaFromFile.");
    loadParaFromFile();
    //qDebug("loadParaFromFile ok.");
    loadParaToPrintInit();
    //para.HVFaultCloseEn= 0;

    if(para.ReadFileErrorCnt<10) para.ReadFileErrorCnt++;
    if(para.PowerOnErrorCnt<10) para.PowerOnErrorCnt++;
    // PowerOnErrorCnt
    //qDebug()<<"cnt ++:"<<para.ReadFileErrorCnt;
    if(para.ReadFileErrorCnt>3  || para.PowerOnErrorCnt>4) {
        //loadDefaultPara();
        // memset( para.lastOpenedFileName,0,sizeof(para.lastOpenedFileName));
        if(para.ReadFileErrorCnt>=4 )
            para.ReadFileErrorCnt=0;
        if(para.PowerOnErrorCnt>=4)
            para.PowerOnErrorCnt=0;
        //qDebug()<<"sys Star Error, cnt :"<<para.ReadFileErrorCnt;
     }

    //saveParaToFile();//下面devOp->writeFpgaPrintPara(true)会调用这个，所以忽略

    //para.HVFaultCloseEn= 1; //开机默认为1，允许高压故障自动关闭回收功能

    devOp->writeFpgaPrintPara(true);	//系统起来的时候，将上次记录的配置写入fpga,比如晶振分频等信息
    devOp->writeFpgaVariCtrl();
    devOp->resumeFault();

    status.lastProductCnt = status.productCnt ;			//这会让产品计数显示出来
    status.gearPumpRunStopFlag = false;
    status.detectBestOscillatorFreqAppending = false;
    status.isPumpValveControledByHand = false;      //初始化为自动模式
    status.forTemplateUse = false;
    status.lastHighVoltageFault = false;
    status.needPowerOffTimerout = 0;
    status.circleProductCnt = false;
    memset(para.reserved2,0,sizeof(para.reserved2));
    status.lastVoltageVersion = -1;
    status.flagOfNo67FPGA=false;
#ifdef __RFID_CARD
    if(!loadRFIDPara()){
        RFIDPara = RFIDPara_t{};
        saveRFIDPara();
    }
#endif
}

void SysPara::loadParaFromFile(){
	QFile file(PARA_FILE_PATH);
    QFile DeviceCodefile(DeviceCode_FILE_PATH);
	QDir dir;
	char buf[200];
    //qDebug()<<"loadParaFromFile";
	if(!dir.exists(DOC_ROOT_DIR)){
		snprintf(buf,sizeof(buf),"mkdir -p %s",DOC_ROOT_DIR);
		system(buf);
	}
	if(!dir.exists(PARA_ROOT_DIR)){
		snprintf(buf,sizeof(buf),"mkdir -p %s",PARA_ROOT_DIR);
		system(buf);
	}
	if(!dir.exists(PARA_ROOT_DIR)){
                QMessageBox::warning(0,QString("warnning"),QString("Path") + PARA_ROOT_DIR + QString("not Found."));
		return ;
	}
	if(file.exists(PARA_FILE_PATH)){
            //qDebug("PARA_FILE_PATH");
        if(!file.open(QIODevice::ReadOnly)){
                        //QMessageBox::warning(0,("警告"),QString("无法打开配置文件 ") + PARA_FILE_PATH);
			loadDefaultPara();
		}
		else {
                file.seek(0);
				file.read((char *)&para,(long long int)sizeof(para));
				file.close();

                // 韩国要求 画布大小可以设定在24 到 32 之间
                para.canvasHeight = qBound(unsigned(SCENE_MIN_HEIGHT), para.canvasHeight, unsigned(SCENE_MAX_HEIGHT));

                if(para.gearPumpSpeedAlarm < 1000 || para.gearPumpSpeedAlarm > 2000)
                    para.gearPumpSpeedAlarm = 1500;

                if (DeviceCodefile.isOpen()) {
                    DeviceCodefile.close();
                }
                //jdDataRwLock.lockForRead();
                if(!DeviceCodefile.open(QIODevice::ReadOnly)){//怀疑是QIODevice::Truncate 引起参数错误，去掉试试看
                    //QMessageBox::warning(0,"警告",QString("无法打开文件") );
                }
                else {
                    DeviceCodefile.seek(0);
                    //file.read((char *)&jd.addr,(long long int)sizeof(jd));
                    DeviceCodefile.read((char *)&para.Json_device_code,(qint64)sizeof(para.Json_device_code));
                    DeviceCodefile.close();
                }
		}
	}
    else {
#ifdef VNLG
            ;
#else
        QMessageBox::information(0,QString("提示"),QString("这可能是你设备第一次上电，或是进行了出厂设置，我们将使用系统默认配置"));
#endif

        loadDefaultPara();
        //loadDefaultPara();//qDebug("loadDefaultPara2");
	}
    //qDebug()<<"SYSPrar:"<<sysFile<<"LO:"<<para.lastOpenedFileName;

    // 现在已由 PrintSettingModel 管理 byons@2026年7月21日
    // loadPrintParaFromFile(sysFile);
}

void SysPara::loadDefaultPara(){
#ifdef VNLG
            ;
#else

        QMessageBox::information(0,"提示2014","这可能是你设备第一次上电，或是进行了出厂设置，我们将使用系统默认配置");
#endif
        memset(&para,0,sizeof(para));
        para.startVoltage = 30;//首行电压
        para.endVoltage = 75;//行末电压
        para.HighVoltageAmplitude = 75;		//字高75%
        para.phaseHighCnt = 300;//高压阀值
        para.alterPrint.enable = 0;//交替打印
        para.stepPrint.enbale = 0;//跳米打印
        para.synPulseNumPerMm = 8;// 同步器参数 脉冲/毫米
        para.OuputPulseCol = 0;//桂林客户,精准控制输出脉冲的位置,精确到打印的列数
        para.gearPumpEnable = 1;
        para.flagOfReclaimPumEnable = true;

        para.oscillatorVoltage = 30;//晶振电压
        para.highVoltageLevel = 100;//高压包容差
        para.reclaimPumpPWMWidth = 50;//回收泵力度
        para.viscosityPumpInterval = 30;//粘度泵动作时间间隔
        para.reclaimTankTime = 25;//回收槽电机当前开关时长(s)
        para.septalPostion = 500;//隔膜位置
        para.pressure = 520;//压力
        para.viscosity = 1200;//粘度设定值
        para.temperature = 35;//喷头温度设定值
        para.divideRatio = (FPGA_SYS_HZ/64000)/2;//晶振频率

        para.phaseDetectVol = 35;//相位检测电压
        para.phase_detect_pulse_num = 7;//检测墨点数量
        para.phaseShift = -280;//相位偏移
        para.phaseHighLowRatio = 50;//相检
        para.phaseDetectDelay = 120;//检测延时
        para.enableChargeFullTime = 1;//充电占空百分比

        para.mixValveisNewVersion = 1;//混和阀是否是新管路
        para.gearPumpSpeedAlarm = 1500;

        para.canvasHeight = 32;
}

void SysPara::saveParaToFile(){
	QFile file(PARA_FILE_PATH);
    QFile DeviceCodefile(DeviceCode_FILE_PATH);

    if (DeviceCodefile.isOpen()) {
        file.close();
    }
        // qDebug()<<"saveParaToFile:"<<sysFile<<"LO:"<<para.lastOpenedFileName;

    if(!file.open(QIODevice::ReadWrite)){//怀疑是QIODevice::Truncate 引起参数错误，去掉试试看
       QMessageBox::warning(0,QString("警告"),QString("无法打开配置文件 ") + PARA_FILE_PATH,
                    QMessageBox::Ok | QMessageBox::Cancel, QMessageBox::Ok );
	}
    else {
        if(file.isOpen()){
            file.seek(0);
            file.write((char *)&para,(long long int)sizeof(para));
            fsync(file.handle());
            file.close();
            if(!DeviceCodefile.open(QIODevice::WriteOnly)){//怀疑是QIODevice::Truncate 引起参数错误，去掉试试看
                //QMessageBox::warning(0,"警告",QString("无法打开文件:mac.bin") );
            }
            else {
                DeviceCodefile.seek(0);
                //file.write((char *)&jd.addr,(long long int)sizeof(jd));
                DeviceCodefile.write((char *)&para.Json_device_code,(qint64)sizeof(para.Json_device_code));

                fsync(DeviceCodefile.handle());

                DeviceCodefile.close();
            }
        }
        if(sysFile!="")
        {
            if(sysFile=="")return ;
             if(!sysFile.endsWith(".dpn"))
                sysFile = QString( PARA_ROOT_DIR+QFileInfo( sysFile).baseName()+".dpn");

            savePrintParaToFile();
        }
	}
}

/*
void SysPara::loadPrintParaFromFile(QString fileName){

       if(fileName=="") return;
       fileName = QString( PARA_ROOT_DIR+QFileInfo( fileName).baseName()+".dpn");
       QFile file(fileName);
        if(!file.exists(fileName)){
            //file.setFileName(TESTFILECD );
            return;
        }

        if(!file.open(QIODevice::ReadOnly)){
                  //QMessageBox::warning(0,"警告",QString("无法打开打印参数文件") + fileName);
                      //loadDefaultPrintPara();
        }
        else {
                        QMessageBox::StandardButton ret;
                        qint32 copy_len;
                        if(file.size() != sizeof(print)){
#ifdef VNLG
            ;
#else

                            QMessageBox::warning(NULL,QString("警告"),QString("文件是旧版软件生成，与当前版本参数不配套!") + fileName,
                                                 QMessageBox::Ok | QMessageBox::Cancel, QMessageBox::Ok );
#endif
                            if(file.size()>sizeof(print))
                                copy_len = sizeof(print);
                            else
                                copy_len = file.size();
                            file.seek(0);
                            file.read((char *)&print,copy_len);
                            file.close();
                        }
                        else {
                            file.seek(0);
                            file.read((char *)&print,(long long int)sizeof(print));
                            file.close();
                            memcpy( (char *)&para.alterPrint,(char *)&print.alterPrint,sizeof(alterPrint_t)) ;
                            para.charBold  = print.charBold ;

                            para.SynCntEn  = print.SynCntEn ;
                            para.autoSynSpeedEn  = print.autoSynSpeedEn ;
                            para.newAmplifyPlate = print.newAmplifyPlate;
                            para.cnt1CurrValue  =   print.cnt1CurrValue; // 20170313 cnt1StartValue;20191226 cnt1CurrValue
                            para.cnt1EndValue  = print.cnt1EndValue ;
                            para.Cnt1NatureValue  = print.Cnt1NatureValue ;


                            para.mixValveisNewVersion = 1;
                            para.cnt1RepeateValue  = print.cnt1RepeateValue ;
                            para.cnt1StartValue  = print.cnt1StartValue ;
                            para.cnt1StepValue  = print.cnt1StepValue ;
                            para.cnt2CurrValue  = print.cnt2CurrValue;//20170313 cnt2StartValue ; /// 20191226cnt2CurrValue
                            para.cnt2EndValue  = print.cnt2EndValue ;
                            para.cnt2RepeateValue  = print.cnt2RepeateValue ;
                            para.cnt2StartValue  = print.cnt2StartValue ;
                            para.cnt2StepValue  = print.cnt2StepValue ;

//                            para.cnt3CurrValue  = print.cnt3CurrValue;//20170313 cnt2StartValue ; /// 20191226cnt2CurrValue
//                            para.cnt3EndValue  = print.cnt3EndValue ;
//                            para.cnt3RepeateValue  = print.cnt3RepeateValue ;
//                            para.cnt3StartValue  = print.cnt3StartValue ;
//                            para.cnt3StepValue  = print.cnt3StepValue ;

                            para.cnt4CurrValue = print.cnt4CurrValue;
                            para.HiddenConditionValue = print.HiddenConditionValue;
                            para.HiddenFuncEnable = print.HiddenFuncEnable;
                            para.HiddenMeterEnable = print.HiddenMeterEnable;

                            para.currPrintMode  = print.currPrintMode ;
                            para.elecEyeTriggerInterval  = print.elecEyeTriggerInterval ;
                            para.eleEyeClearCntInSynMode  = print.eleEyeClearCntInSynMode ;
                            para.eleEyeTriggerPrintDelay  = print.eleEyeTriggerPrintDelay ;
                            para.eleEyeTriggerSynPrintEn  = print.eleEyeTriggerSynPrintEn ;
                            para.endVoltage  = print.endVoltage ;
                            para.extClearAllCntEnable  = print.extClearAllCntEnable ;
                            para.HighVoltageAmplitude  = print.HighVoltageAmplitude ;
                            para.lastLineEndPointFixedDACValue  = print.lastLineEndPointFixedDACValue ;
                            para.lastLineEndPointFixedValue  = print.lastLineEndPointFixedValue ;
                            para.FullColFixVal  = print.FullColFixVal ;

                            para.leftRightInverse  = print.leftRightInverse ;
                            para.lineEndAdjustPointCnt  = print.lineEndAdjustPointCnt ;
                            para.lineEndAdjustPointDelay  = print.lineEndAdjustPointDelay ;
                            para.outputPulseDelayMs  = print.outputPulseDelayMs ;
                            para.photoElectricityRepeateNum  = print.photoElectricityRepeateNum ;
                            para.pixNumPerCol  = print.pixNumPerCol ;
                            para.pointVoltageAdjustPos  = print.pointVoltageAdjustPos ;
                            para.PointVoltageAdjustValue  = print.PointVoltageAdjustValue ;
                            para.printColDelay  = print.printColDelay ;
                            para.printDelayMs  = print.printDelayMs ;
                            para.printDirection  = print.printDirection ;
                            para.printRowDelay  = print.printRowDelay ;
                            para.printTotalColNum  = print.printTotalColNum ;
                            para.printTriggerMode  = print.printTriggerMode ; //打印触发模式
                            para.productCntPerOutputPulse  = print.productCntPerOutputPulse ;
                            para.productNumToGenerateOutputPulse  = print.productNumToGenerateOutputPulse ;
                            para.pulseOutputEnable  = print.pulseOutputEnable ;
                            para.reducedPixelMode  = print.reducedPixelMode ;
                            para.reducedPixelNum  = print.reducedPixelNum ;
                            para.reducedPixelNumRatio  = print.reducedPixelNumRatio ;
                            para.scanInverse  = print.scanInverse ;
                            para.startVoltage  = print.startVoltage ;
                            //print.stepPrint  = print.stepPrint ;
                            memcpy( (char *)&para.stepPrint,(char *)&print.stepPrint,sizeof(stepPrint_t)) ;
                            memcpy( (char *)&para.adjVolDacRate,(char *)&print.adjVolDacRate,sizeof(print.adjVolDacRate)) ;
//edit-12.2
                            //para.synCharWidthRatio  = print.synCharWidthRatio ;
                            para.synClearCntInEleEyeMode  = print.synClearCntInEleEyeMode ;
#if 0 //不需要每个文件都存相位的参数
                            para.synPulseNumPerMm  = print.synPulseNumPerMm ;
                            para.synPulsePerMmX8  = print.synPulsePerMmX8 ;
#endif
                            para.synTriggerPrintLenMm  = print.synTriggerPrintLenMm ; //喷印间隔
                            //para.synTriggerPrintLenRatio  = print.synTriggerPrintLenRatio ;
                            para.sysTriggerPrintMode  = print.sysTriggerPrintMode ;
                            para.timeTriggerPrintDelayMs  = print.timeTriggerPrintDelayMs ;
                            para.timeTriggerPrintMode  = print.timeTriggerPrintMode ;
                            //para.totalSynPulseNum  = print.totalSynPulseNum ;
                            para.upDownInverse  = print.upDownInverse ;

                            para.varLen = print.varLen;
                            print.varLen1 = para.varLen1;
                            para.varLenEn = print.varLenEn?1:0;
                            para.headLen = print.headLen;
                            para.endLen = print.endLen;

                            para.set_HVData_Flag = 0;

                            para.eleMaskTime = print.eleMaskTime;
                            para.AltMirrorGap = print.AltMirrorGap;
                            para.textEditLineSpace = print.textEditLineSpace;
                            //para.weihu  = print.wehu;
                            //qDebug()<<"sysFile3:"<<file.fileName()<< para.cnt1StartValue;
#if 0 //不需要每个文件都存相位的参数
                            //para.phaseHighLowRatio = 55; // ui->spinBoxHighLowRatio->value();
                            para.phaseHighLowRatio = print.phaseHighLowRatio;
                            para.phaseShift = print.phaseShift;
                            para.OuputPulseCol = print.OuputPulseCol;
#ifndef FOR_PHASE_ADJUST
                            print.phase_detect_pulse_num = 7;
                            para.phaseDetectVol = 40;
                            print.phaseDetectDelay = 100;
#else
                            para.phase_detect_pulse_num = print.phase_detect_pulse_num;
                            if (print.phase_detect_pulse_num<3 || print.phase_detect_pulse_num>10) {
                                print.phase_detect_pulse_num = 7;
                            }

                            para.phaseDetectVol = print.phaseDetectVol;
                            if (print.phaseDetectVol < 28 || print.phaseDetectVol > 70)
                                print.phaseDetectVol = 35;

                            para.phaseDetectDelay = print.phaseDetectDelay;//120;// ui->spinBoxPhaseDetectDelay->value();
                            if (print.phaseDetectDelay < 70 || print.phaseDetectDelay > 150)
                                print.phaseDetectDelay = 100;
#endif
                            para.enableChargeFullTime = 1;
#endif
                        }
                }
}
*/


void SysPara::loadPrintParaFromFile(QString fileName){
       if(fileName=="") return;
       fileName = QString( PARA_ROOT_DIR+QFileInfo( fileName).baseName()+".dpn");
       QFile file(fileName);
        if(!file.exists(fileName)){
            //file.setFileName(TESTFILECD );
            return;
        }
        if(!file.open(QIODevice::ReadOnly)){
            //loadDefaultPrintPara();
        }
        else {
            QMessageBox::StandardButton ret;
            qint32 copy_len;
            if(file.size() != sizeof(print)){

                if(file.size()>sizeof(print))
                    copy_len = sizeof(print);
                else
                    copy_len = file.size();
                file.seek(0);
                file.read((char *)&print,copy_len);
                file.close();
            }
            else {
                file.seek(0);
                file.read((char *)&print,(long long int)sizeof(print));

//                file.seek(0);
//                file.read((char *)&printPre,(long long int)sizeof(printPre));
                memcpy( (char *)&printPre,(char *)&print,sizeof(print)) ;
                loadParaToPrintInit();

                file.close();
                memcpy( (char *)&para.alterPrint,(char *)&print.alterPrint,sizeof(alterPrint_t)) ;
                para.charBold  = print.charBold ;

                para.SynCntEn  = print.SynCntEn ;
//                para.autoSynSpeedEn  = print.autoSynSpeedEn ;
//                para.newAmplifyPlate = print.newAmplifyPlate;
                para.cnt1CurrValue  =   print.cnt1CurrValue; // 20170313 cnt1StartValue;20191226 cnt1CurrValue
                para.cnt1EndValue  = print.cnt1EndValue ;
                para.Cnt1NatureValue  = print.Cnt1NatureValue ;

                para.mixValveisNewVersion = 1;
                para.cnt1RepeateValue  = print.cnt1RepeateValue ;
                para.cnt1StartValue  = print.cnt1StartValue ;
                para.cnt1StepValue  = print.cnt1StepValue ;
                para.cnt2CurrValue  = print.cnt2CurrValue;//20170313 cnt2StartValue ; /// 20191226cnt2CurrValue
                para.cnt2EndValue  = print.cnt2EndValue ;
                para.cnt2RepeateValue  = print.cnt2RepeateValue ;
                para.cnt2StartValue  = print.cnt2StartValue ;
                para.cnt2StepValue  = print.cnt2StepValue ;

                para.cnt4CurrValue = print.cnt4CurrValue;
                para.HiddenConditionValue = print.HiddenConditionValue;
                para.HiddenFuncEnable = print.HiddenFuncEnable;
                para.HiddenMeterEnable = print.HiddenMeterEnable;

                if(print.decimalBits == 0){
                    para.printNumPoint == 0 ;
                    para.rrr_nc == 0;
                }else if(print.decimalBits == 1){
                    para.printNumPoint == 1;
                    para.rrr_nc == 0;
                }else if(print.decimalBits == 2){
                    para.printNumPoint == 0;
                    para.rrr_nc == 1;
                }else if(print.decimalBits == 3){
                    para.printNumPoint == 1;
                    para.rrr_nc == 1;
                }
                para.currPrintMode  = print.currPrintMode ;
                para.elecEyeTriggerInterval  = print.elecEyeTriggerInterval ;
                para.eleEyeClearCntInSynMode  = print.eleEyeClearCntInSynMode ;
                para.eleEyeTriggerPrintDelay  = print.eleEyeTriggerPrintDelay ;
                para.eleEyeTriggerSynPrintEn  = print.eleEyeTriggerSynPrintEn ;
                para.HighVoltageAmplitude  = print.HighVoltageAmplitude ;

                para.leftRightInverse  = print.leftRightInverse ;
                para.outputPulseDelayMs  = print.outputPulseDelayMs ;
                para.photoElectricityRepeateNum  = print.photoElectricityRepeateNum ;
                para.printColDelay  = print.printColDelay ;
                para.printDelayMs  = print.printDelayMs ;
                para.printTriggerMode  = print.printTriggerMode ; //打印触发模式
                para.productCntPerOutputPulse  = print.productCntPerOutputPulse ;
                para.pulseOutputEnable  = print.pulseOutputEnable ;
                para.reducedPixelNumRatio  = print.reducedPixelNumRatio ;
                para.scanInverse  = print.scanInverse ;
                memcpy( (char *)&para.stepPrint,(char *)&print.stepPrint,sizeof(stepPrint_t)) ;
              //  memcpy( (char *)&para.adjVolDacRate,(char *)&print.adjVolDacRate,sizeof(print.adjVolDacRate)) ;
                para.synClearCntInEleEyeMode  = print.synClearCntInEleEyeMode ;
                para.synTriggerPrintLenMm  = print.synTriggerPrintLenMm ; //喷印间隔
                para.sysTriggerPrintMode  = print.sysTriggerPrintMode ;
                para.timeTriggerPrintDelayMs  = print.timeTriggerPrintDelayMs ;
                para.timeTriggerPrintMode  = print.timeTriggerPrintMode ;
                para.upDownInverse  = print.upDownInverse ;

                para.varLen = print.varLen;
                print.varLen1 = para.varLen1;
                para.varLenEn = print.varLenEn?1:0;
                para.headLen = print.headLen;
                para.endLen = print.endLen;
                para.set_HVData_Flag = 0;
                para.eleMaskTime = print.eleMaskTime;
//              para.AltMirrorGap = print.AltMirrorGap;
                para.textEditLineSpace = print.textEditLineSpace;
                para.textEditCharSpace = print.textEditCharSpace;
            }
        }
}


void SysPara::loadDefaultPrintPara(){
    loadDefaultPara();
}
/*
void SysPara::savePrintParaToFile(){
//qDebug()<<"savePrintParaToFile";
    if(sysFile=="") return;
    QString fileName = QString( PARA_ROOT_DIR+QFileInfo( sysFile).baseName()+".dpn");
    //qDebug()<<"savePrintParaToFile1:"<<fileName;
    QFile file(fileName);

        if(!file.open(QIODevice::WriteOnly)){//怀疑是QIODevice::Truncate 引起参数错误，去掉试试看
                //QMessageBox::warning(0,"警告",QString("无法打开打印参数文件") + fileName);
        }
        else {
            //qDebug()<<"savePrintParaToFile2:"<<fileName<< para.cnt1StartValue;
            memcpy( (char *)&print.alterPrint,(char *)&para.alterPrint,sizeof(alterPrint_t)) ;
           // print.armrst  = para.armrst ;
            //qDebug()<<"File1:10";
            //print.autoSynSpeedEn  = para.autoSynSpeedEn ;


                            print.SynCntEn  = para.SynCntEn ;
                            print.autoSynSpeedEn  = para.autoSynSpeedEn ;
                            print.autoSynSpeedEn  = para.autoSynSpeedEn ;
                            print.newAmplifyPlate = para.newAmplifyPlate;
                            print.cnt1CurrValue  = para.cnt1CurrValue; // 20170313 cnt1StartValue;20191226 cnt1CurrValue
                            print.cnt1EndValue  = para.cnt1EndValue ;
                            print.Cnt1NatureValue  = para.Cnt1NatureValue ;


            print.charBold  = para.charBold ;
            print.cnt1RepeateValue  = para.cnt1RepeateValue ;
            print.cnt1StartValue  = para.cnt1StartValue ;
            print.cnt1StepValue  = para.cnt1StepValue ;
            print.cnt2CurrValue  = para.cnt2CurrValue ;
            print.cnt2EndValue  = para.cnt2EndValue ;
            print.cnt2RepeateValue  = para.cnt2RepeateValue ;
            print.cnt2StartValue  = para.cnt2StartValue ;
            print.cnt2StepValue  = para.cnt2StepValue ;

//            print.cnt3CurrValue  = para.cnt3CurrValue ;
//            print.cnt3EndValue  = para.cnt3EndValue ;
//            print.cnt3RepeateValue  = para.cnt3RepeateValue ;
//            print.cnt3StartValue  = para.cnt3StartValue ;
//            print.cnt3StepValue  = para.cnt3StepValue ;

            print.cnt4CurrValue = para.cnt4CurrValue;
            print.HiddenConditionValue = para.HiddenConditionValue;
            print.HiddenFuncEnable = para.HiddenFuncEnable;
            print.HiddenMeterEnable = para.HiddenMeterEnable;


            print.currPrintMode  = para.currPrintMode ;
            print.elecEyeTriggerInterval  = para.elecEyeTriggerInterval ;
            print.eleEyeClearCntInSynMode  = para.eleEyeClearCntInSynMode ;
            print.eleEyeTriggerPrintDelay  = para.eleEyeTriggerPrintDelay ;
            print.eleEyeTriggerSynPrintEn  = para.eleEyeTriggerSynPrintEn ;
            print.endVoltage  = para.endVoltage ;
            print.extClearAllCntEnable  = para.extClearAllCntEnable ;
            print.HighVoltageAmplitude  = para.HighVoltageAmplitude ;
            print.FullColFixVal  = para.FullColFixVal ;
            print.lastLineEndPointFixedDACValue  = para.lastLineEndPointFixedDACValue ;
            print.lastLineEndPointFixedValue  = para.lastLineEndPointFixedValue ;
            print.leftRightInverse  = para.leftRightInverse ;
            print.lineEndAdjustPointCnt  = para.lineEndAdjustPointCnt ;
            print.lineEndAdjustPointDelay  = para.lineEndAdjustPointDelay ;
            print.outputPulseDelayMs  = para.outputPulseDelayMs ;
            print.photoElectricityRepeateNum  = para.photoElectricityRepeateNum ;
            print.pixNumPerCol  = para.pixNumPerCol ;
            print.pointVoltageAdjustPos  = para.pointVoltageAdjustPos ;
            print.PointVoltageAdjustValue  = para.PointVoltageAdjustValue ;
            print.printColDelay  = para.printColDelay ;
            print.printDelayMs  = para.printDelayMs ;
            print.printDirection  = para.printDirection ;
            print.printRowDelay  = para.printRowDelay ;
            print.printTotalColNum  = para.printTotalColNum ;
            print.printTriggerMode  = para.printTriggerMode ;
            print.productCntPerOutputPulse  = para.productCntPerOutputPulse ;
            print.productNumToGenerateOutputPulse  = para.productNumToGenerateOutputPulse ;
            print.pulseOutputEnable  = para.pulseOutputEnable ;
            print.reducedPixelMode  = para.reducedPixelMode ;
            print.reducedPixelNum  = para.reducedPixelNum ;
            print.reducedPixelNumRatio  = para.reducedPixelNumRatio ;
            print.scanInverse  = para.scanInverse ;
            print.startVoltage  = para.startVoltage ;
            //print.stepPrint  = para.stepPrint ;
            memcpy( (char *)&print.stepPrint,(char *)&para.stepPrint,sizeof(stepPrint_t)) ;
            memcpy( (char *)&print.adjVolDacRate,(char *)&para.adjVolDacRate,sizeof(para.adjVolDacRate)) ;
//edit-12.2
            //print.synCharWidthRatio  = para.synCharWidthRatio ;
            print.synClearCntInEleEyeMode  = para.synClearCntInEleEyeMode ;
#if 0 //不需要每个文件都存相位的参数
            print.synPulseNumPerMm  = para.synPulseNumPerMm ;
            print.synPulsePerMmX8  = para.synPulsePerMmX8 ;
#endif
            print.synTriggerPrintLenMm  = para.synTriggerPrintLenMm ;
            print.synTriggerPrintLenRatio  = para.synTriggerPrintLenRatio ;
            print.sysTriggerPrintMode  = para.sysTriggerPrintMode ;
            print.timeTriggerPrintDelayMs  = para.timeTriggerPrintDelayMs ;
            print.timeTriggerPrintMode  = para.timeTriggerPrintMode ;
            print.totalSynPulseNum  = para.totalSynPulseNum ;
            print.upDownInverse  = para.upDownInverse ;
            print.eleMaskTime = para.eleMaskTime;
            print.AltMirrorGap = para.AltMirrorGap;

            print.varLen = para.varLen;
            print.varLen1 = para.varLen1;
            print.varLenEn = para.varLenEn;
            print.headLen = para.headLen;
            print.endLen = para.endLen;

            print.OuputPulseCol = para.OuputPulseCol;
            int varNum=0;
            snprintf(print.QRvars[varNum].text,sizeof(print.QRvars[varNum].text),"%s",para.qrOption.text);
            snprintf(print.QRvars[varNum].text2,sizeof(print.QRvars[varNum].text2),"%s",para.qrOption.text2);
            snprintf(print.QRvars[varNum].textCnt,sizeof(print.QRvars[varNum].textCnt),"%s",para.qrOption.textCnt);
            varNum++;
            snprintf(print.QRvars[varNum].text,sizeof(print.QRvars[varNum].text),"%s",para.qrOption.text);
            snprintf(print.QRvars[varNum].text2,sizeof(print.QRvars[varNum].text2),"%s",para.qrOption.text2);
            snprintf(print.QRvars[varNum].textCnt,sizeof(print.QRvars[varNum].textCnt),"%s",para.qrOption.textCnt);
            print.textEditLineSpace = para.textEditLineSpace;
            //print.weihu  = para.wehu;
            //qDebug()<<"File1:1";
            if(file.isOpen())
            {
                file.seek(0);
                file.write((char *)&print,(long long int)sizeof(print));
                fsync(file.handle());

                file.close();
                //qDebug()<<"File1:2";
            }
            //qDebug()<<"File1:3";
        }
}
*/


void SysPara::savePrintParaToFile(){
    if(sysFile=="") return;
    QString fileName = QString( PARA_ROOT_DIR+QFileInfo( sysFile).baseName()+".dpn");
    //qDebug()<<"savePrintParaToFile1:"<<fileName;
    QFile file(fileName);
        if(!file.open(QIODevice::WriteOnly)){//怀疑是QIODevice::Truncate 引起参数错误，去掉试试看
                //QMessageBox::warning(0,"警告",QString("无法打开打印参数文件") + fileName);
        }
        else {
            memcpy( (char *)&print.alterPrint,(char *)&para.alterPrint,sizeof(alterPrint_t)) ;

            print.SynCntEn  = para.SynCntEn ;
            print.cnt1CurrValue  = para.cnt1CurrValue; // 20170313 cnt1StartValue;20191226 cnt1CurrValue
            print.cnt1EndValue  = para.cnt1EndValue ;
            print.Cnt1NatureValue  = para.Cnt1NatureValue ;
            print.charBold  = para.charBold ;
            print.cnt1RepeateValue  = para.cnt1RepeateValue ;
            print.cnt1StartValue  = para.cnt1StartValue ;
            print.cnt1StepValue  = para.cnt1StepValue ;
            print.cnt2CurrValue  = para.cnt2CurrValue ;
            print.cnt2EndValue  = para.cnt2EndValue ;
            print.cnt2RepeateValue  = para.cnt2RepeateValue ;
            print.cnt2StartValue  = para.cnt2StartValue ;
            print.cnt2StepValue  = para.cnt2StepValue ;

            print.cnt4CurrValue = para.cnt4CurrValue;
            print.HiddenConditionValue = para.HiddenConditionValue;
            print.HiddenFuncEnable = para.HiddenFuncEnable;
            print.HiddenMeterEnable = para.HiddenMeterEnable;

            if(para.printNumPoint == 0 && para.rrr_nc == 0)
                print.decimalBits = 0;
            else if(para.printNumPoint == 1 && para.rrr_nc == 0)
                print.decimalBits = 1;
            else if(para.printNumPoint == 0 && para.rrr_nc == 1)
                print.decimalBits = 2;
            else if(para.printNumPoint == 1 && para.rrr_nc == 1)
                print.decimalBits = 3;

            print.currPrintMode  = para.currPrintMode ;
            print.elecEyeTriggerInterval  = para.elecEyeTriggerInterval ;
            print.eleEyeClearCntInSynMode  = para.eleEyeClearCntInSynMode ;
            print.eleEyeTriggerPrintDelay  = para.eleEyeTriggerPrintDelay ;
            print.eleEyeTriggerSynPrintEn  = para.eleEyeTriggerSynPrintEn ;
            print.HighVoltageAmplitude  = para.HighVoltageAmplitude ;
            print.leftRightInverse  = para.leftRightInverse ;
            print.outputPulseDelayMs  = para.outputPulseDelayMs ;
            print.photoElectricityRepeateNum  = para.photoElectricityRepeateNum ;
            print.printColDelay  = para.printColDelay ;
            print.printDelayMs  = para.printDelayMs ;

            print.printTriggerMode  = para.printTriggerMode ;
            print.productCntPerOutputPulse  = para.productCntPerOutputPulse ;

            print.pulseOutputEnable  = para.pulseOutputEnable ;
            print.reducedPixelNumRatio  = para.reducedPixelNumRatio ;
            print.scanInverse  = para.scanInverse ;
            memcpy( (char *)&print.stepPrint,(char *)&para.stepPrint,sizeof(stepPrint_t)) ;
//            memcpy( (char *)&print.adjVolDacRate,(char *)&para.adjVolDacRate,sizeof(para.adjVolDacRate)) ;

            print.synClearCntInEleEyeMode  = para.synClearCntInEleEyeMode ;
            print.synTriggerPrintLenMm  = para.synTriggerPrintLenMm ;

            print.sysTriggerPrintMode  = para.sysTriggerPrintMode ;
            print.timeTriggerPrintDelayMs  = para.timeTriggerPrintDelayMs ;
            print.timeTriggerPrintMode  = para.timeTriggerPrintMode ;
            print.upDownInverse  = para.upDownInverse ;
            print.eleMaskTime = para.eleMaskTime;

            print.varLen = para.varLen;
            print.varLen1 = para.varLen1;
            print.varLenEn = para.varLenEn;
            print.headLen = para.headLen;
            print.endLen = para.endLen;

//            print.OuputPulseCol = para.OuputPulseCol;
            int varNum=0;
            snprintf(print.QRvars[varNum].text,sizeof(print.QRvars[varNum].text),"%s",para.qrOption.text);
            snprintf(print.QRvars[varNum].text2,sizeof(print.QRvars[varNum].text2),"%s",para.qrOption.text2);
            snprintf(print.QRvars[varNum].textCnt,sizeof(print.QRvars[varNum].textCnt),"%s",para.qrOption.textCnt);
            varNum++;
            snprintf(print.QRvars[varNum].text,sizeof(print.QRvars[varNum].text),"%s",para.qrOption.text);
            snprintf(print.QRvars[varNum].text2,sizeof(print.QRvars[varNum].text2),"%s",para.qrOption.text2);
            snprintf(print.QRvars[varNum].textCnt,sizeof(print.QRvars[varNum].textCnt),"%s",para.qrOption.textCnt);
            print.textEditLineSpace = para.textEditLineSpace;
            print.textEditCharSpace = para.textEditCharSpace;
            if(file.isOpen())
            {
                file.seek(0);
                file.write((char *)&print,(long long int)sizeof(print));
                fsync(file.handle());
                file.close();
            }
        }
}

void SysPara::loadParaToPrintInit(){
    printInit.SynCntEn  = para.SynCntEn ;
    printInit.cnt1CurrValue  = para.cnt1CurrValue; // 20170313 cnt1StartValue;20191226 cnt1CurrValue
    printInit.cnt1EndValue  = para.cnt1EndValue ;
    printInit.Cnt1NatureValue  = para.Cnt1NatureValue ;
    printInit.charBold  = para.charBold ;
    printInit.cnt1RepeateValue  = para.cnt1RepeateValue ;
    printInit.cnt1StartValue  = para.cnt1StartValue ;
    printInit.cnt1StepValue  = para.cnt1StepValue ;
    printInit.cnt2CurrValue  = para.cnt2CurrValue ;
    printInit.cnt2EndValue  = para.cnt2EndValue ;
    printInit.cnt2RepeateValue  = para.cnt2RepeateValue ;
    printInit.cnt2StartValue  = para.cnt2StartValue ;
    printInit.cnt2StepValue  = para.cnt2StepValue ;

    printInit.cnt4CurrValue = para.cnt4CurrValue;
    printInit.HiddenConditionValue = para.HiddenConditionValue;
    printInit.HiddenFuncEnable = para.HiddenFuncEnable;
    printInit.HiddenMeterEnable = para.HiddenMeterEnable;

    if(para.printNumPoint == 0 && para.rrr_nc == 0)
        printInit.decimalBits = 0;
    else if(para.printNumPoint == 1 && para.rrr_nc == 0)
        printInit.decimalBits = 1;
    else if(para.printNumPoint == 0 && para.rrr_nc == 1)
        printInit.decimalBits = 2;
    else if(para.printNumPoint == 1 && para.rrr_nc == 1)
        printInit.decimalBits = 3;

    printInit.currPrintMode  = para.currPrintMode ;
    printInit.elecEyeTriggerInterval  = para.elecEyeTriggerInterval ;
    printInit.eleEyeClearCntInSynMode  = para.eleEyeClearCntInSynMode ;
    printInit.eleEyeTriggerPrintDelay  = para.eleEyeTriggerPrintDelay ;
    printInit.eleEyeTriggerSynPrintEn  = para.eleEyeTriggerSynPrintEn ;
    printInit.HighVoltageAmplitude  = para.HighVoltageAmplitude ;
    printInit.leftRightInverse  = para.leftRightInverse ;
    printInit.outputPulseDelayMs  = para.outputPulseDelayMs ;
    printInit.photoElectricityRepeateNum  = para.photoElectricityRepeateNum ;
    printInit.printColDelay  = para.printColDelay ;
    printInit.printDelayMs  = para.printDelayMs ;

    printInit.printTriggerMode  = para.printTriggerMode ;
    printInit.productCntPerOutputPulse  = para.productCntPerOutputPulse ;

    printInit.pulseOutputEnable  = para.pulseOutputEnable ;
    printInit.reducedPixelNumRatio  = para.reducedPixelNumRatio ;
    printInit.scanInverse  = para.scanInverse ;

    printInit.synClearCntInEleEyeMode  = para.synClearCntInEleEyeMode ;
    printInit.synTriggerPrintLenMm  = para.synTriggerPrintLenMm ;

    printInit.sysTriggerPrintMode  = para.sysTriggerPrintMode ;
    printInit.timeTriggerPrintDelayMs  = para.timeTriggerPrintDelayMs ;
    printInit.timeTriggerPrintMode  = para.timeTriggerPrintMode ;
    printInit.upDownInverse  = para.upDownInverse ;
    printInit.eleMaskTime = para.eleMaskTime;

    printInit.varLen = para.varLen;
    printInit.varLen1 = para.varLen1;
    printInit.varLenEn = para.varLenEn;
    printInit.headLen = para.headLen;
    printInit.endLen = para.endLen;

    printInit.textEditLineSpace = para.textEditLineSpace;
    printInit.textEditCharSpace = para.textEditCharSpace;
}

void SysPara::updatePrintInitToPara(){
    para.charBold  = printInit.charBold ;

    para.SynCntEn  = printInit.SynCntEn ;
    para.cnt1CurrValue  =   printInit.cnt1CurrValue; // 20170313 cnt1StartValue;20191226 cnt1CurrValue
    para.cnt1EndValue  = printInit.cnt1EndValue ;
    para.Cnt1NatureValue  = printInit.Cnt1NatureValue ;

    para.cnt1RepeateValue  = printInit.cnt1RepeateValue ;
    para.cnt1StartValue  = printInit.cnt1StartValue ;
    para.cnt1StepValue  = printInit.cnt1StepValue ;
    para.cnt2CurrValue  = printInit.cnt2CurrValue;//20170313 cnt2StartValue ; /// 20191226cnt2CurrValue
    para.cnt2EndValue  = printInit.cnt2EndValue ;
    para.cnt2RepeateValue  = printInit.cnt2RepeateValue ;
    para.cnt2StartValue  = printInit.cnt2StartValue ;
    para.cnt2StepValue  = printInit.cnt2StepValue ;

    para.cnt4CurrValue = printInit.cnt4CurrValue;
    para.HiddenConditionValue = printInit.HiddenConditionValue;
    para.HiddenFuncEnable = printInit.HiddenFuncEnable;
    para.HiddenMeterEnable = printInit.HiddenMeterEnable;

    if(printInit.decimalBits == 0){
        para.printNumPoint == 0 ;
        para.rrr_nc == 0;
    }else if(printInit.decimalBits == 1){
        para.printNumPoint == 1;
        para.rrr_nc == 0;
    }else if(printInit.decimalBits == 2){
        para.printNumPoint == 0;
        para.rrr_nc == 1;
    }else if(printInit.decimalBits == 3){
        para.printNumPoint == 1;
        para.rrr_nc == 1;
    }
    para.currPrintMode  = printInit.currPrintMode ;
    para.elecEyeTriggerInterval  = printInit.elecEyeTriggerInterval ;
    para.eleEyeClearCntInSynMode  = printInit.eleEyeClearCntInSynMode ;
    para.eleEyeTriggerPrintDelay  = printInit.eleEyeTriggerPrintDelay ;
    para.eleEyeTriggerSynPrintEn  = printInit.eleEyeTriggerSynPrintEn ;
    para.HighVoltageAmplitude  = printInit.HighVoltageAmplitude ;

    para.leftRightInverse  = printInit.leftRightInverse ;
    para.outputPulseDelayMs  = printInit.outputPulseDelayMs ;
    para.photoElectricityRepeateNum  = printInit.photoElectricityRepeateNum ;
    para.printColDelay  = printInit.printColDelay ;
    para.printDelayMs  = printInit.printDelayMs ;
    para.printTriggerMode  = printInit.printTriggerMode ; //打印触发模式
    para.productCntPerOutputPulse  = printInit.productCntPerOutputPulse ;
    para.pulseOutputEnable  = printInit.pulseOutputEnable ;
    para.reducedPixelNumRatio  = printInit.reducedPixelNumRatio ;
    para.scanInverse  = printInit.scanInverse ;

    para.synClearCntInEleEyeMode  = printInit.synClearCntInEleEyeMode ;
    para.synTriggerPrintLenMm  = printInit.synTriggerPrintLenMm ; //喷印间隔
    para.sysTriggerPrintMode  = printInit.sysTriggerPrintMode ;
    para.timeTriggerPrintDelayMs  = printInit.timeTriggerPrintDelayMs ;
    para.timeTriggerPrintMode  = printInit.timeTriggerPrintMode ;
    para.upDownInverse  = printInit.upDownInverse ;

    para.varLen = printInit.varLen;
    printInit.varLen1 = para.varLen1;
    para.varLenEn = printInit.varLenEn?1:0;
    para.headLen = printInit.headLen;
    para.endLen = printInit.endLen;
    para.set_HVData_Flag = 0;
    para.eleMaskTime = printInit.eleMaskTime;
    para.textEditLineSpace = printInit.textEditLineSpace;
    para.textEditCharSpace = printInit.textEditCharSpace;
}

void SysPara::loadVolteParaFromFile(PRINT_MODE mode)
{
    QString volParaFilePath;
    unsigned int type = status.fpgaVersionNum >> 12;
//    unsigned int type = 6;
    if(mode == FAST_PRINT )
    {
        volParaFilePath = ":/conf/VoltParaHi.bin";
    }
    else if(mode == STANDARD_PRINT)
    {
        volParaFilePath = PARA_ROOT_DIR"VoltParaStd.bin";
    }

    if(status.build_dat.builTime == 73){
        volParaFilePath = ":/conf/VoltePara_No73.bin";
        status.currVoltageVersion =  VersionOf73;
    }
    else if(type == 6 || type == 8){
        if(status.currPrintRow <=21){
            volParaFilePath = ":/conf/VoltDataStd21.bin";
            status.currVoltageVersion = VersionOf72And21R;
        }
        else if(status.currPrintRow <=25){
            volParaFilePath = ":/conf/VoltDataStd25.bin";
            status.currVoltageVersion = VersionOf72And25R;
        }
        else if(para.currSelectVolPara == FiveLineFiveDot){
            volParaFilePath = ":/conf/VoltDataStd5Row5Dot.bin";
            status.currVoltageVersion = VersionOf72And5Row5Dot;
            if(status.currPrintRow > 32){
                volParaFilePath = ":/conf/VoltDataStd5R5DOf34Dot.bin";      //34dot
                status.currVoltageVersion = VersionOf72And5Row5Dot34;
            }
        }
        else if(para.currSelectVolPara == FourLineSevenDot){
            volParaFilePath = ":/conf/VoltDataStd4Row7Dot.bin";
            status.currVoltageVersion = VersionOf72And4Row7Dot;
            if(status.currPrintRow > 32){
                volParaFilePath = ":/conf/VoltDataStd4R7DOf34Dot.bin";      //34dot
                status.currVoltageVersion = VersionOf72And4Row7Dot34;
            }
        }
        else
        {
            volParaFilePath = ":/conf/VoltDataStd32.bin";
            status.currVoltageVersion = VersionOf72And32R;
        }
    }

    LogInfo::setRunStatusText(QString("volParaFilePath:%1").arg(volParaFilePath));

    QFile file(volParaFilePath);

    QDir dir;
    char buf[200];
    if (!dir.exists(DOC_ROOT_DIR)){
        snprintf(buf, sizeof(buf), "mkdir -p %s", DOC_ROOT_DIR);
        system(buf);
    }
    if (!dir.exists(PARA_ROOT_DIR)){
        snprintf(buf, sizeof(buf), "mkdir -p %s", PARA_ROOT_DIR);
        system(buf);
    }
    if (!dir.exists(PARA_ROOT_DIR)){
        QMessageBox::warning(0, QString("warnning"), QString("Path") + PARA_ROOT_DIR + QString("not Found."));
        return;
    }

    qDebug() << "loadVolteParaFromFile: " << volParaFilePath;

    if (file.exists(volParaFilePath)){
        if (!file.open(QIODevice::ReadOnly)){
        }
        else {
            QMessageBox::StandardButton ret = QMessageBox::Ok;
            qint32 copy_len;
            char *volteStruct = (char *)&voltePara;
            size_t sizeofVolteParaStruct = sizeof(voltePara);
            if(status.build_dat.builTime == 73){
                volteStruct = (char *)&voltePara_No73;
                sizeofVolteParaStruct = sizeof(voltePara_No73);
            }
            else if(type == 6 || type ==8){
                memset(&voltePara_25Dots,0,sizeof(voltePara_25Dots));
                volteStruct = (char *)&voltePara_25Dots;
                sizeofVolteParaStruct = sizeof(voltePara_25Dots);
            }
            if (file.size() != sizeofVolteParaStruct){
//                qDebug()<<"注意，电压文件大小不对！";
//                LogInfo::setRunStatusText(QString("注意，电压文件大小不对！"));
#ifdef VNLG
                ;
#else
                ret = QMessageBox::warning(NULL, QString("警告"), QString("配置文件大小不一致，按 确定 将采取兼容方式读取配置文件"),
                    QMessageBox::Ok | QMessageBox::Cancel, QMessageBox::Ok);

#endif
                if (ret == QMessageBox::Ok){
                        copy_len = file.size() < sizeofVolteParaStruct?file.size():sizeofVolteParaStruct;
                    file.seek(0);
                    file.read(volteStruct, copy_len);
                    file.close();
                }
                else if (ret == QMessageBox::Cancel) {
                    file.close();
                }
            }
            else {
                file.seek(0);
                file.read(volteStruct, (long long int)sizeofVolteParaStruct);
                file.close();
            }
        }
    }
    else {
        qDebug() << "There is no Volte Para File.";
        LogInfo::setRunStatusText(QString("There is no Volte Para File."));
    }
}

void SysPara::saveRFIDPara()
{
    QFile file(RFID_FILE_PATH);
    if (!file.open(QIODevice::WriteOnly | QIODevice::Truncate)) {
        qDebug() << "Error: Could not open file for writing";
        return;
    }
    QDataStream out(&file);
    out.setVersion(QDataStream::Qt_4_6); // Set the version compatible with Qt 4.8.5
    out << RFIDPara.PrintInkDots;
    out << RFIDPara.InkEmptyCnt;
    out << RFIDPara.SOLVEmptyCnt;
    out << RFIDPara.InkRFIDCnt;
    out << RFIDPara.SOLVRFIDCnt;
    out << RFIDPara.solventNumber;
    out << RFIDPara.needInkCard;
    out << RFIDPara.needSolventCard;
    out << RFIDPara.inkCardTimeOut;
    out << RFIDPara.solventCardTimeOut;
    out << RFIDPara.maintenanceDate;
    out << RFIDPara.maintenanceInterval;
    out << RFIDPara.maintenanceEndDate;
    out << RFIDPara.needMaintenance;
    out << (unsigned int)(RFIDPara.runtimeMs / 1000);
    out << RFIDPara.maintenanceHours;
    out << RFIDPara.addedInk;
    out << RFIDPara.addedSolvent;
    out << RFIDPara.cardInk;
    out << RFIDPara.cardSolvent;
    out << para.rfidCountDown;
    out << status.showInkWarningNumber << status.showSolventWarningNumber;
    out << RFIDPara.inInkAndRFIDProgress << RFIDPara.inSolventAndRFIDProgress << RFIDPara.runtimeMs;

    if(!file.flush()){
        LogInfo::setRunStatusText("RFID Para save Failed 1");
        qDebug()<<"RFID Para save Failed 1";
        file.close();
        return;
    }
    int ret = fsync(file.handle());
    if(ret == -1){
        qDebug()<<"RFID Para save Failed 2";
        LogInfo::setRunStatusText("RFID Para save Failed 2");
    }
    file.close();
}

bool SysPara::loadRFIDPara()
{
    QFile file(RFID_FILE_PATH);
       if (!file.open(QIODevice::ReadOnly)) {
           qDebug() << "Error: Could not open file for reading";
           return false;
       }

       QDataStream in(&file);
       in.setVersion(QDataStream::Qt_4_6); // Set the version compatible with Qt 4.8.5
       uint oldRuntimeSec = 0;

       RFIDPara.inInkAndRFIDProgress = 0;
       RFIDPara.inSolventAndRFIDProgress = 0;
       RFIDPara.runtimeMs = 0;

       in >> RFIDPara.PrintInkDots;
       in >> RFIDPara.InkEmptyCnt;
       in >> RFIDPara.SOLVEmptyCnt;
       in >> RFIDPara.InkRFIDCnt;
       in >> RFIDPara.SOLVRFIDCnt;
       in >> RFIDPara.solventNumber;
       in >> RFIDPara.needInkCard;
       in >> RFIDPara.needSolventCard;
       in >> RFIDPara.inkCardTimeOut;
       in >> RFIDPara.solventCardTimeOut;
       in >> RFIDPara.maintenanceDate;
       in >> RFIDPara.maintenanceInterval;
       in >> RFIDPara.maintenanceEndDate;
       in >> RFIDPara.needMaintenance;
       in >> oldRuntimeSec;
       in >> RFIDPara.maintenanceHours;
       in >> RFIDPara.addedInk;
       in >> RFIDPara.addedSolvent;
       in >> RFIDPara.cardInk;
       in >> RFIDPara.cardSolvent;
       in >> para.rfidCountDown;
       in >> status.showInkWarningNumber >> status.showSolventWarningNumber;
       in >> RFIDPara.inInkAndRFIDProgress >> RFIDPara.inSolventAndRFIDProgress >> RFIDPara.runtimeMs;

       // 兼容获取旧的运行时间，如果新的运行时间为0且旧的运行时间大于0，则使用旧的运行时间
       // 新时间所占用的8字节空间，在旧实现上也是没有用的，它们总是被写入为0，因此RFIDPara.runtimeMs为 0 ，表示软件刚刚升级，第一次运行，应该使用旧的运行时间
       if(RFIDPara.runtimeMs == 0){
           RFIDPara.runtimeMs = oldRuntimeSec * 1000;
       }

       file.close();
       return true;
}

void SysPara::comparePrintStruct(){

    if(print.charBold != printPre.charBold){
        printInit.charBold = print.charBold;
    }
    if(print.SynCntEn != printPre.SynCntEn){
        printInit.SynCntEn = print.SynCntEn;
    }
    if(print.cnt1CurrValue != printPre.cnt1CurrValue){
        printInit.cnt1CurrValue = print.cnt1CurrValue;

    }
    if(print.cnt1EndValue != printPre.cnt1EndValue){
        printInit.cnt1EndValue = print.cnt1EndValue;

    }
    if(print.Cnt1NatureValue != printPre.Cnt1NatureValue){
        printInit.Cnt1NatureValue = print.Cnt1NatureValue;

    }
    if(print.charBold != printPre.charBold){
        printInit.charBold = print.charBold;
    }
    if(print.cnt1RepeateValue != printPre.cnt1RepeateValue){
        printInit.cnt1RepeateValue = printPre.cnt1RepeateValue;

    }
    if(print.cnt1StartValue != printPre.cnt1StartValue){
        printInit.cnt1StartValue = print.cnt1StartValue;

    }
    if(print.cnt1StepValue != printPre.cnt1StepValue ){
        printInit.cnt1StepValue = print.cnt1StepValue;

    }
    if(print.cnt2CurrValue != printPre.cnt2CurrValue){
        printInit.cnt2CurrValue = print.cnt2CurrValue;
    }
    if(print.cnt2EndValue != printPre.cnt2EndValue){
        printInit.cnt2EndValue = print.cnt2EndValue;

    }
    if(print.cnt2RepeateValue != printPre.cnt2RepeateValue){
        printInit.cnt2RepeateValue = print.cnt2RepeateValue;

    }
    if(print.cnt2StartValue != printPre.cnt2StartValue){
        printInit.cnt2StartValue = print.cnt2StartValue;

    }
    if(print.cnt2StepValue != printPre.cnt2StepValue ){
        printInit.cnt2StepValue = print.cnt2StepValue;
    }

    if(print.cnt4CurrValue != printPre.cnt4CurrValue){
        printInit.cnt4CurrValue = print.cnt4CurrValue;

    }
    if(print.HiddenConditionValue != printPre.HiddenConditionValue){
        printInit.HiddenConditionValue = print.HiddenConditionValue;
    }
    if(print.HiddenFuncEnable != printPre.HiddenFuncEnable){
        printInit.HiddenFuncEnable = print.HiddenFuncEnable;
    }
    if(print.HiddenMeterEnable != printPre.HiddenMeterEnable){
        printInit.HiddenMeterEnable = print.HiddenMeterEnable;
    }

    if(print.currPrintMode != printPre.currPrintMode ){
        printInit.currPrintMode = print.currPrintMode;
    }
    if(print.elecEyeTriggerInterval != printPre.elecEyeTriggerInterval){
        printInit.elecEyeTriggerInterval = print.elecEyeTriggerInterval;
    }
    if(print.eleEyeClearCntInSynMode != printPre.eleEyeClearCntInSynMode){
        printInit.eleEyeClearCntInSynMode = print.eleEyeClearCntInSynMode;
    }
    if(print.eleEyeTriggerPrintDelay != printPre.eleEyeTriggerPrintDelay){
        printInit.eleEyeTriggerPrintDelay = print.eleEyeTriggerPrintDelay;
    }
    if(print.eleEyeTriggerSynPrintEn != printPre.eleEyeTriggerSynPrintEn){
        printInit.eleEyeTriggerSynPrintEn = print.eleEyeTriggerSynPrintEn;
    }

    if(print.HighVoltageAmplitude != printPre.HighVoltageAmplitude){
        printInit.HighVoltageAmplitude = print.HighVoltageAmplitude;
    }

    if(print.leftRightInverse != printPre.leftRightInverse){
        printInit.leftRightInverse = print.leftRightInverse;
    }

    if(print.outputPulseDelayMs != printPre.outputPulseDelayMs){
        printInit.outputPulseDelayMs = print.outputPulseDelayMs;

    }
    if(print.photoElectricityRepeateNum != printPre.photoElectricityRepeateNum){
        printInit.photoElectricityRepeateNum = print.photoElectricityRepeateNum;
    }

    if(print.printColDelay != printPre.printColDelay){
        printInit.printColDelay = print.printColDelay;
    }
    if(print.printDelayMs != printPre.printDelayMs){
        printInit.printDelayMs = print.printDelayMs;
    }

    if(print.printTriggerMode != printPre.printTriggerMode){
        printInit.printTriggerMode = print.printTriggerMode;
    }
    if(print.productCntPerOutputPulse != printPre.productCntPerOutputPulse){
        printInit.productCntPerOutputPulse = print.productCntPerOutputPulse;
    }
    if(print.pulseOutputEnable != printPre.pulseOutputEnable){
        printInit.pulseOutputEnable = print.pulseOutputEnable;
    }

    if(print.reducedPixelNumRatio != printPre.reducedPixelNumRatio){
        printInit.reducedPixelNumRatio = print.reducedPixelNumRatio;
    }

    if(print.synClearCntInEleEyeMode != printPre.synClearCntInEleEyeMode){
        printInit.synClearCntInEleEyeMode = print.synClearCntInEleEyeMode;

    }

    if(print.synTriggerPrintLenMm != printPre.synTriggerPrintLenMm){
        printInit.synTriggerPrintLenMm = print.synTriggerPrintLenMm;
    }

    if(print.sysTriggerPrintMode != printPre.sysTriggerPrintMode){
        printInit.sysTriggerPrintMode = print.sysTriggerPrintMode;
    }
    if(print.timeTriggerPrintDelayMs != printPre.timeTriggerPrintDelayMs){
        printInit.timeTriggerPrintDelayMs = print.timeTriggerPrintDelayMs;
    }
    if(print.timeTriggerPrintMode  != printPre.timeTriggerPrintMode){
        printInit.timeTriggerPrintMode = print.timeTriggerPrintMode;
    }

    if(print.upDownInverse != printPre.upDownInverse){
        printInit.upDownInverse = print.upDownInverse;
    }
    if(print.eleMaskTime != printPre.eleMaskTime){
        printInit.eleMaskTime = print.eleMaskTime;
    }
    if(print.varLen != printPre.varLen){
        printInit.varLen = print.varLen;
    }
    if(print.varLen1 != printPre.varLen1){
        printInit.varLen1 = print.varLen1;
    }
    if(print.varLenEn != printPre.varLenEn){
        printInit.varLenEn = print.varLenEn;
    }
    if(print.headLen != printPre.headLen){
        printInit.headLen = print.headLen;
    }
    if(print.endLen != printPre.endLen){
        printInit.endLen = print.endLen;
    }
    if(print.textEditLineSpace != printPre.textEditLineSpace){
        printInit.textEditLineSpace = print.textEditLineSpace;
    }
    if(print.textEditCharSpace != printPre.textEditCharSpace){
        printInit.textEditCharSpace = print.textEditCharSpace;

    }
}