2026年6月25日 暂存

DevOp.cpp

@@ -3606,7 +3606,29 @@ void DevOp::resendFPGADate(int cmd, int addr, unsigned char *dat, int len, int t
     emit sendSerialDataToFPGA(cmd,addr,dat,len,type);
 }
 
-void DevOp::resendSTM32Date(int cmd, int addr, unsigned char *dat, int len, int type){
+extern "C" {
+  #pragma pack(1)
+  typedef struct FlightComCtrl_t_ {
+    uint8_t flags;              // bit0: 启用飞行补偿控制， bit1: 启用加减速预测
+    uint32_t flightCompWindow;
+  }FlightComCtrl_t;
+  #pragma pack()
+}
+
+void DevOp::writeFlightCompCtrl(bool enb, bool enbAccelDecelPredict, quint32 flightCompWindow)
+{
+    static FlightComCtrl_t flightComCtrl;
+
+    memset(&flightComCtrl, 0, sizeof(FlightComCtrl_t));
+    flightComCtrl.flags |= (enb ? 1 : 0);
+    flightComCtrl.flags |= (enbAccelDecelPredict ? 0x2 : 0x0);
+    flightComCtrl.flightCompWindow = flightCompWindow;
+
+    fpgaWr(FLIGHT_COMP_CTRL_BASE, (unsigned char*)(&flightComCtrl), sizeof(FlightComCtrl_t));
+}
+
+void DevOp::resendSTM32Date(int cmd, int addr, unsigned char *dat, int len, int type)
+{
     emit sendSerialDataToSTM32(cmd,addr,dat,len,type);
 }
 

DevOp.h

@@ -164,6 +164,9 @@ class SysPara;
 #define SUCTION_PUMP_90P  	"echo 90 > /sys/class/pwm/ehrpwm.0:1/duty_percent"
 #define SUCTION_PUMP_12000Hz "echo 12000 > /sys/class/pwm/ehrpwm.0:1/period_freq"
 
+// 墨点飞行补偿控制写地址，具体引用于 DevOp::writeFlightCompCtrl
+#define FLIGHT_COMP_CTRL_BASE 0xA4A0
+
 /*
  * 请不要直接初始化此函数，如果需要，请通过SysPara的devOP来访问此类
  * */
@@ -293,6 +296,14 @@ public :
     void showData(QByteArray dat);
     void writeDacValue2Fpga_No72NewVoltData();
 
+    /**
+     * @brief 写入飞行时间补偿控制
+     * 
+     * @param enb 启用或关闭飞行时间补偿控制
+     * @param enbAccelDecelPredict 启用或关闭加减速预测
+     * @param flightCompWindow 补偿统计窗口，仅在 enb 为 true 有意义
+     */
+    void writeFlightCompCtrl(bool enb, bool enbAccelDecelPredict, quint32 flightCompWindow);
 
 public slots:
 

InkJetPrinter.cpp

@@ -104,6 +104,7 @@ void InkJetPrinter::init()
     connect(m_MainWidget, &MainWidget::sendButtonClickedSignal, this, &InkJetPrinter::getMainWidgetButtonClickedSlot);
     connect(m_MainWidget,SIGNAL(setDisableAll()),this,SLOT(disableTabClick()));
     connect (m_MainWidget,SIGNAL(CloseJd()),this,SLOT(close_jd_timer()));
+    connect(m_MainWidget, &MainWidget::newFileAcquired, this, &InkJetPrinter::createNewJobFile);
     connect(m_TestPrintWidget, &TestPrintWidget::sendButtonClickedSignal, this, &InkJetPrinter::getTestPrintWidgetButtonClickedSlot);
 
     // TestPrintWidget::sendButtonClickedSignal(16) 转由 openDatetimeEditor 处理
@@ -1404,9 +1405,12 @@ void InkJetPrinter::getTestPrintWidgetButtonClickedSlot(int index)
          m_MainWidget->onPreviewScene();
         break;
     }
+
+    // 哪个天才写的？ 有什么用？
     case 21:
     {
-          m_StackedWidget->setCurrentWidget(m_TestPrintWidget);
+          // 没用的切换，不讲逻辑的嘛？
+          // m_StackedWidget->setCurrentWidget(m_TestPrintWidget);
           break;
     }
     default:
@@ -1639,7 +1643,6 @@ void InkJetPrinter::getCounterVarSetWidgetButtonClickSlot(int index){
 void InkJetPrinter::slt_counterVarUpdate()
 {
     // m_StackedWidget->setCurrentWidget(m_TestPrintWidget);
-    // m_TestPrintWidget->onEditItemCounterDone();
 }
 
 void InkJetPrinter::showScheduleShiftsEditor(QVector<ScheduleModel> schedules, TextItemModel txtModel)
@@ -2676,6 +2679,28 @@ void InkJetPrinter::warningShow(int type,int num){
         qDebug()<<str;
     }
 }
+/**
+ * @brief 创建新的工作文件
+ * 
+ */
+void InkJetPrinter::createNewJobFile()
+{
+    auto currentFile = m_TestPrintWidget->currentFile();
+    if(!currentFile.isEmpty()) {
+        QFileInfo fileInfo(currentFile);
+        auto ret = QMessageBox::information(nullptr, "", tr("当前正在使用\r\n %1 \r\n确定要新建文件吗?").arg(fileInfo.baseName()), 
+                                            QMessageBox::Ok, QMessageBox::Cancel);
+        if(ret == QMessageBox::Cancel) {
+            LogInfo::setRunStatusText("Canceled create new job file.");
+            return;
+        }
+    }
+
+    LogInfo::setRunStatusText("Create new job file...");
+    qInfo() << "Switch to job edit widget...";
+    m_StackedWidget->setCurrentWidget(m_TestPrintWidget);
+    m_TestPrintWidget->on_newfileButton_pressed();
+}
 
 int InkJetPrinter::dateTimeElasped(int type,QString str){
     QFile file;

InkJetPrinter.h

@@ -194,6 +194,8 @@ public slots:
       void warningHandler(int);
       void warningShow(int,int);
 
+      void createNewJobFile();
+
 public:
     bool eventFilter(QObject *watched, QEvent *event);
 };

MainWidget.ui

@@ -18,7 +18,7 @@
   </property>
   <property name="maximumSize">
    <size>
-    <width>800</width>
+    <width>16777215</width>
     <height>16777215</height>
    </size>
   </property>
@@ -73,6 +73,16 @@
            <height>0</height>
           </rect>
          </property>
+         <item>
+          <widget class="QPushButton" name="btn_newFile">
+           <property name="styleSheet">
+            <string notr="true">QPushButton {background: qlineargradient(x1: 0.5, y1: 0, x2: 0.5, y2: 1, stop: 0 #6F9CD6, stop: 1 #A5ABB7);border: none;border-radius: 8px;font-size: 14px;text-align: center;padding-top: 20px;padding-bottom: 1px;}</string>
+           </property>
+           <property name="text">
+            <string>新建文件</string>
+           </property>
+          </widget>
+         </item>
          <item>
           <widget class="QPushButton" name="m_EditBtn">
            <property name="styleSheet">
@@ -124,7 +134,14 @@
          <item>
           <widget class="QPushButton" name="m_ManageBtn">
            <property name="styleSheet">
-            <string notr="true">QPushButton {background: qlineargradient(x1: 0.5, y1: 0, x2: 0.5, y2: 1, stop: 0 #6F9CD6, stop: 1 #A5ABB7);border: none;border-radius: 8px;font-size: 14px;text-align: center;padding-top: 20px;padding-bottom: 1px;}</string>
+            <string notr="true">QPushButton {
+background: qlineargradient(x1: 0.5, y1: 0, x2: 0.5, y2: 1, stop: 0 #6F9CD6, stop: 1 #A5ABB7);
+border: none;
+border-radius: 8px;
+font-size: 14px;
+text-align: center;
+padding-top: 20px;
+padding-bottom: 1px;}</string>
            </property>
            <property name="text">
             <string>管理器</string>

Printsetting.cpp

@@ -17,11 +17,6 @@ PrintSetting::PrintSetting(QWidget *parent) :
     ui->lineEditTriggerPulsePerMm->setValidator(new QDoubleValidator(0));
     connect(pulseNumFix,SIGNAL(pulseNuxFixDone(float)),this,SLOT(onPulseNumFixDone(float)));
 
-    ui->checkBoxEleEyeMakeClean->setHidden(1);
-    ui->spinBoxOuputPulseCol->setHidden(1);
-    ui->labelSynTriggerPrintLenRatio->setHidden(1);
-    ui->spinBoxSynTriggerPrintLenRatio->setHidden(1);
-
     // 隐藏延时、产生脉冲所需计数、脉冲输出使能、禁止电眼清零、字符宽度、电眼清零
     ui->labelOutputPulseDelayMs->hide();
     ui->spinBoxOutputPulseDelayMs->hide();
@@ -32,11 +27,12 @@ PrintSetting::PrintSetting(QWidget *parent) :
     ui->checkBoxEleEyeMakeClean->hide();
     ui->spinBoxOuputPulseCol->hide();
     ui->checkBoxPulseOutputEnable->hide();
+    ui->comboBoxEleEyeMakeClean->setCurrentIndex(0);
     ui->comboBoxEleEyeMakeClean->hide();
-    
+    // 间隔模式默认行末对行首
-
+    ui->comboBoxTimeTriggerMode->setEnabled(false);
-    // ui->labelTimeTriggerMode->setEnabled(false);
+    ui->spinBoxpluseSinal->hide();
-    // ui->comboBoxTimeTriggerMode->setEnabled(false);
+    ui->label_6->hide();
     
     init();
 
@@ -131,6 +127,8 @@ void PrintSetting::applyUIPara(){
 
         sysPara->devOp->writeFpgaCalandar(0);
 
+        sysPara->devOp->writeFlightCompCtrl(ui->enbFlightCompCtrl->isChecked(), 
+            ui->enbAccelDecelPredict->isChecked(), quint32(ui->flightCompWindowCycles->value()));
     }
 }
 
@@ -183,7 +181,7 @@ void PrintSetting::TriggerupdateSysParaToUI(){
         ui->radioButtonSynTriggerInner->setChecked(sysPara->para.synTriggerInner);
         ui->radioButtonSynTriggerExternal->setChecked(sysPara->para.synTriggerExternal);
 
-        ui->sb_printingDelay->setValue(sysPara->para.printDelayMs);
+        ui->spinBoxEleEyeTriggerPrintDelay->setValue(sysPara->para.eleEyeTriggerPrintDelay);
 #ifndef NON_CABLE
         ui->comboBoxTimeTriggerMode->setCurrentIndex(sysPara->para.timeTriggerPrintMode);
 #endif
@@ -201,9 +199,9 @@ void PrintSetting::TriggerupdateSysParaToUI(){
             ui->spinBoxSynTriggerPrintLenRatio->setValue(sysPara->para.synTriggerPrintLenRatio);
 
         /*----------------------------------------*/
-        ui->spinBoxEleEyeTriggerPrintDelay->setValue(sysPara->para.eleEyeTriggerPrintDelay);
+        // ui->spinBoxEleEyeTriggerPrintDelay->setValue(sysPara->para.eleEyeTriggerPrintDelay);
         //ui->checkBoxEleEyeMakeClean->setChecked(sysPara->para.eleEyeClearCntInSynMode);
-        ui->comboBoxEleEyeMakeClean->setCurrentIndex( sysPara->para.eleEyeClearCntInSynMode & 0x0f);
+        ui->comboBoxEleEyeMakeClean->setCurrentIndex( sysPara->para.eleEyeClearCntInSynMode - 0x20);
 
         ui->checkBoxPulseOutputEnable->setChecked(sysPara->para.pulseOutputEnable);
         // ui->labelProductCntPerOutputPulse->setEnabled(sysPara->para.pulseOutputEnable);
@@ -216,7 +214,14 @@ void PrintSetting::TriggerupdateSysParaToUI(){
 
         // ui->spinBoxOutputPulseDelayMs->setEnabled(isPulseEenable);
         ui->spinBoxOuputPulseCol->setValue(sysPara->para.OuputPulseCol);
-        ui->comboBoxSyncActType->setCurrentIndex (sysPara->para.synchronizorActType);
+
+        // 通过是否关闭同步器反转补偿，来确定选项框索引
+        int comboBoxSyncActTypeIndex = int(sysPara->para.synchronizorActType);
+        if(!sysPara->para.syncRevCompDisable && sysPara->para.synchronizorActType != 0) {
+            comboBoxSyncActTypeIndex = int(sysPara->para.synchronizorActType) + 2;
+        }
+        ui->comboBoxSyncActType->setCurrentIndex(comboBoxSyncActTypeIndex);
+
         //ui->checkBoxAutoSpeedEN->setChecked (sysPara->para.autoSynSpeedEn );
         ui->spinBoxEleMaskTime->setValue(sysPara->para.eleMaskTime);
 
@@ -297,7 +302,7 @@ void PrintSetting::applyUITriggerPara(){
 
 void PrintSetting::GetTriggerUIPara(){
     if(sysPara){
-        sysPara->para.printDelayMs = ui->sb_printingDelay->value();
+        sysPara->para.eleEyeTriggerPrintDelay = ui->spinBoxEleEyeTriggerPrintDelay->value();
         sysPara->para.timeTriggerPrintMode = ui->comboBoxTimeTriggerMode->currentIndex();
         sysPara->para.elecEyeTriggerInterval = ui->spinBoxEleEyeTriggerIntervalMs->value();     //电眼触发的重复间隔
         int value = 0;
@@ -357,14 +362,22 @@ void PrintSetting::GetTriggerUIPara(){
         //        sysPara->para.eleEyeTriggerSynPrintEn = ui->checkEyeTriggerSynPrintEn->isChecked ();
         // sysPara->para.eleEyeTriggerSynPrintEn = ui->eleEyeEdgetTriggerExternal->isChecked() && ui->radioButtonSynTriggerExternal->isChecked();
 
-        sysPara->para.eleEyeTriggerPrintDelay = ui->spinBoxEleEyeTriggerPrintDelay->value();
+        // sysPara->para.eleEyeTriggerPrintDelay = ui->spinBoxEleEyeTriggerPrintDelay->value();
-        sysPara->para.eleEyeClearCntInSynMode = (sysPara->para.eleEyeClearCntInSynMode & 0xf0) + ui->comboBoxEleEyeMakeClean->currentIndex();   //ui->checkBoxEleEyeMakeClean->isChecked();
+
+        // 韩国版本不需要电眼清零 byons@2026年6月23日
+        sysPara->para.eleEyeClearCntInSynMode = 0x20 ; // + ui->comboBoxEleEyeMakeClean->currentIndex();   //ui->checkBoxEleEyeMakeClean->isChecked();
         //sysPara->para.autoSynSpeedEn = ui->checkBoxAutoSpeedEN->isChecked ();
-        sysPara->para.autoSynSpeedEn = 0;
+        sysPara->para.syncRevCompDisable = 0;
         //sysPara->para.synPulsePerMmX8 = (unsigned short)(sysPara->para.synPulseNumPerMm *256);
         sysPara->para.synPulsePerMmX8 = (unsigned short)((unsigned int)sysPara->para.synPulseNumPerMm <<8);
         sysPara->para.eleMaskTime = ui->spinBoxEleMaskTime->value();
-        sysPara->para.synchronizorActType = ui->comboBoxSyncActType->currentIndex();
+
+        // 带补偿的正反转打印选项，位于最后两个comboBox item
+        sysPara->para.synchronizorActType = ui->comboBoxSyncActType->currentIndex() > 2 ? 
+            ui->comboBoxSyncActType->currentIndex() - 2 : ui->comboBoxSyncActType->currentIndex();
+
+        sysPara->para.syncRevCompDisable = ui->comboBoxSyncActType->currentIndex() <= 2;
+
         sysPara->para.pulse_sinal_value = ui->spinBoxpluseSinal->value();
     }
 }
@@ -438,7 +451,7 @@ void PrintSetting::on_checkEyeTriggerSynPrintEn_clicked(bool checked)
             ui->labelEleEyeTriggerIntervalMs->setText(tr("重复间隔(毫米)"));
             ui->labelEleMaskTime->setText(tr("抑止距离(毫米)"));
             ui->labelOutputPulseDelayMs->setText(tr("延时(毫米):"));
-            if(ui->comboBoxSyncActType->currentIndex() || 0b11) //如果不是在正反转打印的模式下，就切换到正反转模式
+            if(ui->comboBoxSyncActType->currentIndex() >= ui->comboBoxSyncActType->count() || ui->comboBoxSyncActType->currentIndex() == -1) //如果不是在正反转打印的模式下，就切换到正反转模式
             {
                 ui->comboBoxSyncActType->setCurrentIndex(0);
             }
@@ -706,13 +719,14 @@ void PrintSetting::on_eleEyeEdgetTriggerInner_clicked()
 
 void PrintSetting::setEnableEleEyeSetting(bool flag){
 
-    ui->labelEleEyeTriggerIntervalMs->setEnabled(!(!flag && ui->radioButtonSynTriggerInner->isChecked()));
+    ui->labelEleEyeTriggerIntervalMs->setEnabled(!(ui->radioButtonSynTriggerExternal->isChecked() && ui->eleEyeEdgetTriggerInner->isChecked()));
+    ui->spinBoxEleEyeTriggerIntervalMs->setEnabled(!(ui->radioButtonSynTriggerExternal->isChecked() && ui->eleEyeEdgetTriggerInner->isChecked()));
     ui->spinBoxEleMaskTime->setEnabled(flag);
     ui->spinBoxEleEyeTriggerRepeatCnt->setEnabled(flag);
     ui->radioButtonEleEyeEdgetTrigger->setEnabled(flag);
     ui->radioButtonEleEyeLevelTrigger->setEnabled(flag);
     ui->cb_unlimited->setEnabled(flag);
-    ui->sb_printingDelay->setEnabled(flag);
+    ui->spinBoxEleEyeTriggerPrintDelay->setEnabled(flag);
     if (!flag) ui->cb_unlimited->setChecked(false);
 }
 

Printsetting.ui

@@ -26,7 +26,7 @@
     <enum>Qt::StrongFocus</enum>
    </property>
    <property name="currentIndex">
-    <number>3</number>
+    <number>4</number>
    </property>
    <widget class="QWidget" name="tab">
     <attribute name="title">
@@ -35,8 +35,8 @@
     <widget class="QLabel" name="label_9">
      <property name="geometry">
       <rect>
-       <x>150</x>
+       <x>39</x>
-       <y>80</y>
+       <y>60</y>
        <width>191</width>
        <height>37</height>
       </rect>
@@ -57,8 +57,8 @@
     <widget class="QSpinBox" name="spinBoxHighVoltageValue">
      <property name="geometry">
       <rect>
-       <x>350</x>
+       <x>239</x>
-       <y>80</y>
+       <y>60</y>
        <width>121</width>
        <height>37</height>
       </rect>
@@ -82,9 +82,9 @@
     <widget class="QLabel" name="label_3">
      <property name="geometry">
       <rect>
-       <x>140</x>
+       <x>39</x>
-       <y>150</y>
+       <y>130</y>
-       <width>201</width>
+       <width>191</width>
        <height>37</height>
       </rect>
      </property>
@@ -104,8 +104,8 @@
     <widget class="QSpinBox" name="spinBoxColDelay">
      <property name="geometry">
       <rect>
-       <x>350</x>
+       <x>239</x>
-       <y>150</y>
+       <y>130</y>
        <width>122</width>
        <height>37</height>
       </rect>
@@ -123,9 +123,9 @@
     <widget class="QLabel" name="label_38">
      <property name="geometry">
       <rect>
-       <x>120</x>
+       <x>29</x>
-       <y>230</y>
+       <y>210</y>
-       <width>221</width>
+       <width>201</width>
        <height>37</height>
       </rect>
      </property>
@@ -139,8 +139,8 @@
     <widget class="QComboBox" name="comboBox_selcetVolPara">
      <property name="geometry">
       <rect>
-       <x>351</x>
+       <x>240</x>
-       <y>230</y>
+       <y>210</y>
        <width>220</width>
        <height>37</height>
       </rect>
@@ -167,6 +167,58 @@
       </property>
      </item>
     </widget>
+    <widget class="QCheckBox" name="checkBoxLeftRightInverse">
+     <property name="geometry">
+      <rect>
+       <x>480</x>
+       <y>130</y>
+       <width>161</width>
+       <height>37</height>
+      </rect>
+     </property>
+     <property name="minimumSize">
+      <size>
+       <width>0</width>
+       <height>37</height>
+      </size>
+     </property>
+     <property name="layoutDirection">
+      <enum>Qt::RightToLeft</enum>
+     </property>
+     <property name="text">
+      <string>信息左右颠倒</string>
+     </property>
+     <property name="icon">
+      <iconset resource="image.qrc">
+       <normaloff>:/icon/leftright.png</normaloff>:/icon/leftright.png</iconset>
+     </property>
+    </widget>
+    <widget class="QCheckBox" name="checkBoxUpDownInverse">
+     <property name="geometry">
+      <rect>
+       <x>480</x>
+       <y>60</y>
+       <width>161</width>
+       <height>37</height>
+      </rect>
+     </property>
+     <property name="minimumSize">
+      <size>
+       <width>0</width>
+       <height>37</height>
+      </size>
+     </property>
+     <property name="layoutDirection">
+      <enum>Qt::RightToLeft</enum>
+     </property>
+     <property name="text">
+      <string>信息上下颠倒</string>
+     </property>
+     <property name="icon">
+      <iconset resource="image.qrc">
+       <normaloff>:/icon/updown.png</normaloff>:/icon/updown.png</iconset>
+     </property>
+    </widget>
    </widget>
    <widget class="QWidget" name="tab_4">
     <attribute name="title">
@@ -296,7 +348,7 @@
      </property>
      <layout class="QGridLayout" name="gridLayout">
       <item row="0" column="0">
-       <widget class="QLabel" name="lb_printingDelay">
+       <widget class="QLabel" name="labelEleEyeTriggerPrintDelay">
         <property name="maximumSize">
          <size>
           <width>16777215</width>
@@ -315,7 +367,7 @@
        </widget>
       </item>
       <item row="0" column="1">
-       <widget class="QSpinBox" name="sb_printingDelay">
+       <widget class="QSpinBox" name="spinBoxEleEyeTriggerPrintDelay">
         <property name="sizePolicy">
          <sizepolicy hsizetype="Preferred" vsizetype="Preferred">
           <horstretch>0</horstretch>
@@ -701,6 +753,16 @@
           <string>同步器只反转打印</string>
          </property>
         </item>
+        <item>
+         <property name="text">
+          <string>带补偿的正转打印</string>
+         </property>
+        </item>
+        <item>
+         <property name="text">
+          <string>带补偿的反转打印</string>
+         </property>
+        </item>
        </widget>
       </item>
      </layout>
@@ -758,274 +820,6 @@
     <attribute name="title">
      <string>其他设置</string>
     </attribute>
-    <widget class="QCheckBox" name="checkBoxUpDownInverse">
-     <property name="geometry">
-      <rect>
-       <x>434</x>
-       <y>90</y>
-       <width>161</width>
-       <height>37</height>
-      </rect>
-     </property>
-     <property name="minimumSize">
-      <size>
-       <width>0</width>
-       <height>37</height>
-      </size>
-     </property>
-     <property name="layoutDirection">
-      <enum>Qt::RightToLeft</enum>
-     </property>
-     <property name="text">
-      <string>信息上下颠倒</string>
-     </property>
-     <property name="icon">
-      <iconset resource="image.qrc">
-       <normaloff>:/icon/updown.png</normaloff>:/icon/updown.png</iconset>
-     </property>
-    </widget>
-    <widget class="QCheckBox" name="checkBoxLeftRightInverse">
-     <property name="geometry">
-      <rect>
-       <x>434</x>
-       <y>140</y>
-       <width>161</width>
-       <height>37</height>
-      </rect>
-     </property>
-     <property name="minimumSize">
-      <size>
-       <width>0</width>
-       <height>37</height>
-      </size>
-     </property>
-     <property name="layoutDirection">
-      <enum>Qt::RightToLeft</enum>
-     </property>
-     <property name="text">
-      <string>信息左右颠倒</string>
-     </property>
-     <property name="icon">
-      <iconset resource="image.qrc">
-       <normaloff>:/icon/leftright.png</normaloff>:/icon/leftright.png</iconset>
-     </property>
-    </widget>
-    <widget class="QWidget" name="layoutWidget_9">
-     <property name="geometry">
-      <rect>
-       <x>40</x>
-       <y>30</y>
-       <width>311</width>
-       <height>211</height>
-      </rect>
-     </property>
-     <layout class="QGridLayout" name="gridLayout_8" columnstretch="1,1" columnminimumwidth="1,1">
-      <item row="1" column="1">
-       <widget class="QSpinBox" name="spinBoxAltMirrorGap">
-        <property name="sizePolicy">
-         <sizepolicy hsizetype="Minimum" vsizetype="Preferred">
-          <horstretch>0</horstretch>
-          <verstretch>0</verstretch>
-         </sizepolicy>
-        </property>
-        <property name="maximumSize">
-         <size>
-          <width>16777215</width>
-          <height>37</height>
-         </size>
-        </property>
-        <property name="maximum">
-         <number>65535</number>
-        </property>
-       </widget>
-      </item>
-      <item row="2" column="0">
-       <widget class="QLabel" name="label_6">
-        <property name="styleSheet">
-         <string notr="true"/>
-        </property>
-        <property name="text">
-         <string>脉冲信号值:</string>
-        </property>
-        <property name="alignment">
-         <set>Qt::AlignRight|Qt::AlignTrailing|Qt::AlignVCenter</set>
-        </property>
-       </widget>
-      </item>
-      <item row="0" column="1">
-       <widget class="QComboBox" name="comboBoxAltMirrType">
-        <property name="sizePolicy">
-         <sizepolicy hsizetype="Preferred" vsizetype="Preferred">
-          <horstretch>0</horstretch>
-          <verstretch>0</verstretch>
-         </sizepolicy>
-        </property>
-        <property name="minimumSize">
-         <size>
-          <width>150</width>
-          <height>0</height>
-         </size>
-        </property>
-        <property name="maximumSize">
-         <size>
-          <width>110</width>
-          <height>37</height>
-         </size>
-        </property>
-        <item>
-         <property name="text">
-          <string>无镜像打印</string>
-         </property>
-        </item>
-        <item>
-         <property name="text">
-          <string>自动水平翻转 </string>
-         </property>
-        </item>
-        <item>
-         <property name="text">
-          <string>自动垂直翻转</string>
-         </property>
-        </item>
-        <item>
-         <property name="text">
-          <string>中心对称旋转</string>
-         </property>
-        </item>
-       </widget>
-      </item>
-      <item row="2" column="1">
-       <widget class="QSpinBox" name="spinBoxpluseSinal">
-        <property name="sizePolicy">
-         <sizepolicy hsizetype="Minimum" vsizetype="Preferred">
-          <horstretch>0</horstretch>
-          <verstretch>0</verstretch>
-         </sizepolicy>
-        </property>
-        <property name="maximumSize">
-         <size>
-          <width>16777215</width>
-          <height>37</height>
-         </size>
-        </property>
-        <property name="prefix">
-         <string/>
-        </property>
-        <property name="maximum">
-         <number>100</number>
-        </property>
-       </widget>
-      </item>
-      <item row="4" column="1">
-       <widget class="QSpinBox" name="spinBoxOutputPulseDelayMs">
-        <property name="sizePolicy">
-         <sizepolicy hsizetype="Preferred" vsizetype="Preferred">
-          <horstretch>0</horstretch>
-          <verstretch>0</verstretch>
-         </sizepolicy>
-        </property>
-        <property name="maximumSize">
-         <size>
-          <width>16777215</width>
-          <height>100</height>
-         </size>
-        </property>
-        <property name="minimum">
-         <number>0</number>
-        </property>
-        <property name="maximum">
-         <number>65535</number>
-        </property>
-        <property name="singleStep">
-         <number>1</number>
-        </property>
-        <property name="value">
-         <number>10</number>
-        </property>
-       </widget>
-      </item>
-      <item row="0" column="0">
-       <widget class="QLabel" name="label_7">
-        <property name="styleSheet">
-         <string notr="true"/>
-        </property>
-        <property name="text">
-         <string>镜象交替类型:</string>
-        </property>
-        <property name="alignment">
-         <set>Qt::AlignRight|Qt::AlignTrailing|Qt::AlignVCenter</set>
-        </property>
-       </widget>
-      </item>
-      <item row="4" column="0">
-       <widget class="QLabel" name="labelOutputPulseDelayMs">
-        <property name="styleSheet">
-         <string notr="true"/>
-        </property>
-        <property name="text">
-         <string>延时(毫秒):</string>
-        </property>
-        <property name="alignment">
-         <set>Qt::AlignRight|Qt::AlignTrailing|Qt::AlignVCenter</set>
-        </property>
-       </widget>
-      </item>
-      <item row="1" column="0">
-       <widget class="QLabel" name="label_8">
-        <property name="styleSheet">
-         <string notr="true"/>
-        </property>
-        <property name="text">
-         <string>镜像交替间隔:</string>
-        </property>
-        <property name="alignment">
-         <set>Qt::AlignRight|Qt::AlignTrailing|Qt::AlignVCenter</set>
-        </property>
-       </widget>
-      </item>
-      <item row="3" column="0">
-       <widget class="ClickLabel" name="labelEleEyeTriggerPrintDelay">
-        <property name="styleSheet">
-         <string notr="true"/>
-        </property>
-        <property name="text">
-         <string>触发延时(毫秒):</string>
-        </property>
-        <property name="alignment">
-         <set>Qt::AlignRight|Qt::AlignTrailing|Qt::AlignVCenter</set>
-        </property>
-       </widget>
-      </item>
-      <item row="3" column="1">
-       <widget class="QSpinBox" name="spinBoxEleEyeTriggerPrintDelay">
-        <property name="sizePolicy">
-         <sizepolicy hsizetype="Preferred" vsizetype="Preferred">
-          <horstretch>0</horstretch>
-          <verstretch>0</verstretch>
-         </sizepolicy>
-        </property>
-        <property name="maximumSize">
-         <size>
-          <width>16777215</width>
-          <height>37</height>
-         </size>
-        </property>
-        <property name="minimum">
-         <number>1</number>
-        </property>
-        <property name="maximum">
-         <number>100000</number>
-        </property>
-        <property name="singleStep">
-         <number>1</number>
-        </property>
-        <property name="value">
-         <number>1</number>
-        </property>
-       </widget>
-      </item>
-     </layout>
-    </widget>
     <widget class="QComboBox" name="comboBoxEleEyeMakeClean">
      <property name="geometry">
       <rect>
@@ -1307,6 +1101,251 @@
       </item>
      </layout>
     </widget>
+    <widget class="QWidget" name="layoutWidget">
+     <property name="geometry">
+      <rect>
+       <x>41</x>
+       <y>31</y>
+       <width>311</width>
+       <height>211</height>
+      </rect>
+     </property>
+     <layout class="QGridLayout" name="gridLayout_3">
+      <item row="1" column="1">
+       <widget class="QSpinBox" name="spinBoxAltMirrorGap">
+        <property name="sizePolicy">
+         <sizepolicy hsizetype="Minimum" vsizetype="Preferred">
+          <horstretch>0</horstretch>
+          <verstretch>0</verstretch>
+         </sizepolicy>
+        </property>
+        <property name="maximumSize">
+         <size>
+          <width>16777215</width>
+          <height>37</height>
+         </size>
+        </property>
+        <property name="maximum">
+         <number>65535</number>
+        </property>
+       </widget>
+      </item>
+      <item row="0" column="1">
+       <widget class="QComboBox" name="comboBoxAltMirrType">
+        <property name="sizePolicy">
+         <sizepolicy hsizetype="Preferred" vsizetype="Preferred">
+          <horstretch>0</horstretch>
+          <verstretch>0</verstretch>
+         </sizepolicy>
+        </property>
+        <property name="minimumSize">
+         <size>
+          <width>150</width>
+          <height>0</height>
+         </size>
+        </property>
+        <property name="maximumSize">
+         <size>
+          <width>110</width>
+          <height>37</height>
+         </size>
+        </property>
+        <item>
+         <property name="text">
+          <string>无镜像打印</string>
+         </property>
+        </item>
+        <item>
+         <property name="text">
+          <string>自动水平翻转 </string>
+         </property>
+        </item>
+        <item>
+         <property name="text">
+          <string>自动垂直翻转</string>
+         </property>
+        </item>
+        <item>
+         <property name="text">
+          <string>中心对称旋转</string>
+         </property>
+        </item>
+       </widget>
+      </item>
+      <item row="0" column="0">
+       <widget class="QLabel" name="label_7">
+        <property name="styleSheet">
+         <string notr="true"/>
+        </property>
+        <property name="text">
+         <string>镜象交替类型:</string>
+        </property>
+        <property name="alignment">
+         <set>Qt::AlignRight|Qt::AlignTrailing|Qt::AlignVCenter</set>
+        </property>
+       </widget>
+      </item>
+      <item row="1" column="0">
+       <widget class="QLabel" name="label_8">
+        <property name="styleSheet">
+         <string notr="true"/>
+        </property>
+        <property name="text">
+         <string>镜像交替间隔:</string>
+        </property>
+        <property name="alignment">
+         <set>Qt::AlignRight|Qt::AlignTrailing|Qt::AlignVCenter</set>
+        </property>
+       </widget>
+      </item>
+      <item row="3" column="1">
+       <widget class="QSpinBox" name="spinBoxOutputPulseDelayMs">
+        <property name="sizePolicy">
+         <sizepolicy hsizetype="Preferred" vsizetype="Preferred">
+          <horstretch>0</horstretch>
+          <verstretch>0</verstretch>
+         </sizepolicy>
+        </property>
+        <property name="maximumSize">
+         <size>
+          <width>16777215</width>
+          <height>31</height>
+         </size>
+        </property>
+        <property name="minimum">
+         <number>0</number>
+        </property>
+        <property name="maximum">
+         <number>65535</number>
+        </property>
+        <property name="singleStep">
+         <number>1</number>
+        </property>
+        <property name="value">
+         <number>10</number>
+        </property>
+       </widget>
+      </item>
+      <item row="3" column="0">
+       <widget class="QLabel" name="labelOutputPulseDelayMs">
+        <property name="styleSheet">
+         <string notr="true"/>
+        </property>
+        <property name="text">
+         <string>延时(毫秒):</string>
+        </property>
+        <property name="alignment">
+         <set>Qt::AlignRight|Qt::AlignTrailing|Qt::AlignVCenter</set>
+        </property>
+       </widget>
+      </item>
+      <item row="2" column="0">
+       <widget class="QLabel" name="label_6">
+        <property name="styleSheet">
+         <string notr="true"/>
+        </property>
+        <property name="text">
+         <string>脉冲信号值:</string>
+        </property>
+        <property name="alignment">
+         <set>Qt::AlignRight|Qt::AlignTrailing|Qt::AlignVCenter</set>
+        </property>
+       </widget>
+      </item>
+      <item row="2" column="1">
+       <widget class="QSpinBox" name="spinBoxpluseSinal">
+        <property name="sizePolicy">
+         <sizepolicy hsizetype="Minimum" vsizetype="Preferred">
+          <horstretch>0</horstretch>
+          <verstretch>0</verstretch>
+         </sizepolicy>
+        </property>
+        <property name="maximumSize">
+         <size>
+          <width>16777215</width>
+          <height>37</height>
+         </size>
+        </property>
+        <property name="prefix">
+         <string/>
+        </property>
+        <property name="maximum">
+         <number>100</number>
+        </property>
+       </widget>
+      </item>
+     </layout>
+    </widget>
+   </widget>
+   <widget class="QWidget" name="tab_2">
+    <attribute name="title">
+     <string>调试设置</string>
+    </attribute>
+    <widget class="QCheckBox" name="enbFlightCompCtrl">
+     <property name="geometry">
+      <rect>
+       <x>30</x>
+       <y>10</y>
+       <width>181</width>
+       <height>31</height>
+      </rect>
+     </property>
+     <property name="text">
+      <string>开启墨点飞行补偿</string>
+     </property>
+    </widget>
+    <widget class="QWidget" name="flightCompPanel" native="true">
+     <property name="geometry">
+      <rect>
+       <x>20</x>
+       <y>40</y>
+       <width>771</width>
+       <height>111</height>
+      </rect>
+     </property>
+     <widget class="QLabel" name="labFlightComp">
+      <property name="geometry">
+       <rect>
+        <x>10</x>
+        <y>0</y>
+        <width>751</width>
+        <height>31</height>
+       </rect>
+      </property>
+      <property name="text">
+       <string>墨点飞行补偿统计窗口(系统时钟周期), 0表示使用相检得到的飞行时间</string>
+      </property>
+     </widget>
+     <widget class="QSpinBox" name="flightCompWindowCycles">
+      <property name="geometry">
+       <rect>
+        <x>10</x>
+        <y>30</y>
+        <width>241</width>
+        <height>31</height>
+       </rect>
+      </property>
+      <property name="buttonSymbols">
+       <enum>QAbstractSpinBox::NoButtons</enum>
+      </property>
+      <property name="maximum">
+       <number>999999999</number>
+      </property>
+     </widget>
+     <widget class="QCheckBox" name="enbAccelDecelPredict">
+      <property name="geometry">
+       <rect>
+        <x>10</x>
+        <y>70</y>
+        <width>301</width>
+        <height>31</height>
+       </rect>
+      </property>
+      <property name="text">
+       <string>启用加减速预测</string>
+      </property>
+     </widget>
+    </widget>
    </widget>
   </widget>
   <widget class="QPushButton" name="closeBtn">
@@ -1349,5 +1388,22 @@
  <resources>
   <include location="image.qrc"/>
  </resources>
- <connections/>
+ <connections>
+  <connection>
+   <sender>enbFlightCompCtrl</sender>
+   <signal>toggled(bool)</signal>
+   <receiver>flightCompPanel</receiver>
+   <slot>setEnabled(bool)</slot>
+   <hints>
+    <hint type="sourcelabel">
+     <x>86</x>
+     <y>41</y>
+    </hint>
+    <hint type="destinationlabel">
+     <x>446</x>
+     <y>129</y>
+    </hint>
+   </hints>
+  </connection>
+ </connections>
 </ui>

SysPara.cpp

@@ -489,7 +489,7 @@ void SysPara::loadPrintParaFromFile(QString fileName){
                 para.timeTriggerPrintDelayMs  = print.timeTriggerPrintDelayMs ;
                 para.timeTriggerPrintMode  = print.timeTriggerPrintMode ;
                 para.upDownInverse  = print.upDownInverse ;
-z
+
                 para.varLen = print.varLen;
                 print.varLen1 = para.varLen1;
                 para.varLenEn = print.varLenEn?1:0;

SysPara.h

@@ -604,7 +604,7 @@ typedef struct {
 
     unsigned char Cnt1NatureValue:1; //自然数
     unsigned char eleEyeTriggerSynPrintEn:1; //电眼触发的同步打印使能
-    unsigned char autoSynSpeedEn:1; //同步打印自动模式
+    unsigned char syncRevCompDisable:1; //同步打印自动模式
     unsigned char newAmplifyPlate:1;
     unsigned char SynCntEn1:1;  //  不打印走米
     unsigned char Vol1of8En:1;  //打印优化

TestPrintWidget.ui

@@ -892,7 +892,7 @@
         }</string>
               </property>
               <property name="text">
-               <string>JET2neo-TEST</string>
+               <string/>
               </property>
              </widget>
             </item>

VerBVersion.h

@@ -5,9 +5,9 @@
   Major.Minor.Rivison.yyyy-MM-DD_Beta
 */
 #define UP_PRINTER_MAJOR_VER  6
-#define UP_PRINTER_MINOR_VER  3
+#define UP_PRINTER_MINOR_VER  6
-#define UP_PRINTER_RIVISION_VER  6
+#define UP_PRINTER_RIVISION_VER  1
-#define SUB_VERSION "_V2"
+#define SUB_VERSION "_test"
 #ifdef __RFID_OLD
 #define SUB_RFID "_RO"
 #else

mainwidget.cpp

@@ -69,8 +69,8 @@ MainWidget::MainWidget(QWidget* parent)
 
 //    ui.labelRunStatus->setWordWrap(true);
 
-    ui.sub3->installEventFilter(this);
+//    ui.sub3->installEventFilter(this);
-    ui.fra_state->installEventFilter(this);
+//    ui.fra_state->installEventFilter(this);
     ui.labelTotalProductCnt->hide();
     ui.lb_counter->hide();
 
@@ -95,6 +95,8 @@ MainWidget::MainWidget(QWidget* parent)
 
     scroller->setScrollerProperties(properties);
     scroller->grabGesture(ui.scrollArea->viewport(), QScroller::LeftMouseButtonGesture);
+
+    connect(ui.btn_newFile, &QPushButton::clicked, this, &MainWidget::newFileAcquired);
 }
 
 MainWidget::~MainWidget()
@@ -1534,6 +1536,9 @@ void MainWidget::enableReclaimCtrlButton(bool enable){
 }
 
 void MainWidget::enablePrintButton(bool enable){
+#ifdef QT_DEBUG
+    enable = true;
+#endif
     m_StartBtn->setEnabled(enable);
     m_StopBtn->setEnabled(enable);
 }
@@ -1593,6 +1598,7 @@ void MainWidget::on_m_StartBtn_clicked()
             }
         }
         /******2020/2/29 end*****/
+        #ifndef QT_DEBUG
         if(!SIMULATE_PRINTING_MODE){
             if (!sysPara->status.reclainTankReachEnd) {
                 return;
@@ -1606,6 +1612,7 @@ void MainWidget::on_m_StartBtn_clicked()
                 return ;
             }
         }
+        #endif
 
         sysPara->devOp->highVoltageCtrl(1);
         sysPara->devOp->setHighVoltageAmplitudetoSTM32();
@@ -2344,8 +2351,8 @@ void MainWidget::updateSysStatusToUI(){ //100ms
         //    ui->pushButton_Reboot->setEnabled(false);
         }
 
-        if(sysPara->RFIDPara.inkCardTimeOut || sysPara->RFIDPara.solventCardTimeOut || sysPara->RFIDPara.needMaintenance)
+        // if(sysPara->RFIDPara.inkCardTimeOut || sysPara->RFIDPara.solventCardTimeOut || sysPara->RFIDPara.needMaintenance)
-            m_RightBtn->setEnabled(false);
+            // m_RightBtn->setEnabled(false); todo
         // else if(sysPara->status.selfCheckDone == 1)
         // {
         //     m_RightBtn->setEnabled(true);
@@ -3525,27 +3532,102 @@ bool MainWidget::updatePhaseIndicatorLight(){
     return sysPara->status.lastPhaseFault;
 }
 
-bool MainWidget::eventFilter(QObject *watched, QEvent *event)
+
+//void MainWidget::mouseDoubleClickEvent(QMouseEvent *event)
+//{
+//    if (event->button() != Qt::LeftButton) {
+//        QWidget::mouseDoubleClickEvent(event);
+//        return;
+//    }
+
+//    QPoint globalPos = event->globalPos();
+//    const int expandSize = 50; // 扩大到50像素
+
+//    // 检测函数
+//    auto isInExpandedRect = [&](QWidget* widget) -> bool {
+//        if (!widget) return false;
+//        QRect rect = widget->geometry();
+//        rect.translate(widget->parentWidget()->mapToGlobal(QPoint(0, 0)));
+//        rect.adjust(-expandSize, -expandSize, expandSize, expandSize);
+//        return rect.contains(globalPos);
+//    };
+
+//    if (isInExpandedRect(ui.sub3)) {
+//        if (m_setNumDlg) {
+//            m_setNumDlg->show();
+//            event->accept();
+//            return;
+//        }
+//    }
+
+//    if (isInExpandedRect(ui.fra_state)) {
+//        LogInfoCtrl::instance()->emitSigShow();
+//        event->accept();
+//        return;
+//    }
+
+//    QWidget::mouseDoubleClickEvent(event);
+//}
+
+void MainWidget::mousePressEvent(QMouseEvent *event)
     {
-    if (event->type() == QEvent::MouseButtonDblClick) {
+        if (event->button() != Qt::LeftButton) {
-        //双击事件，设置总数xxx，打印该数量后停止
+            QWidget::mousePressEvent(event);
-        if (watched == ui.sub3 || watched == ui.labelProductCnt) {
+            return;
+        }
+
+        QPoint currentPos = event->globalPos();
+        qint64 currentTime = QDateTime::currentMSecsSinceEpoch();
+
+        // 计算时间和距离
+        qint64 timeDiff = currentTime - m_lastClickTime;
+        int distance = QLineF(m_lastClickPos, currentPos).length();
+
+        // 判断是否为双击（使用自定义阈值）
+        if (timeDiff <= m_doubleClickInterval && distance <= m_doubleClickDistance) {
+            // 触发双击逻辑
+            handleDoubleClick(event);
+            m_lastClickTime = 0; // 重置，防止三连击触发多次
+            m_lastClickPos = QPoint();
+            event->accept();
+            return;
+        }
+
+        // 更新最后一次点击信息
+        m_lastClickPos = currentPos;
+        m_lastClickTime = currentTime;
+
+        QWidget::mousePressEvent(event);
+    }
+
+void MainWidget::handleDoubleClick(QMouseEvent *event)
+{
+    QPoint globalPos = event->globalPos();
+
+    // 检查目标区域
+    if (isInExpandedRect(ui.sub3, globalPos, m_doubleClickDistance)) {
         if (m_setNumDlg) {
             m_setNumDlg->show();
-                return true;
         }
+        return;
+    }
+
+    if (isInExpandedRect(ui.fra_state, globalPos, m_doubleClickDistance)) {
+        LogInfoCtrl::instance()->emitSigShow();
+        return;
     }
 }
 
-    if (event->type() == QEvent::MouseButtonDblClick) {
+bool MainWidget::isInExpandedRect(QWidget* widget, const QPoint& globalPos, int expandSize)
-        if (watched == ui.fra_state || ui.lb_generalState) {
+{
-            LogInfoCtrl::instance()->emitSigShow();
+    if (!widget || !widget->isVisible()) return false;
-            return true;
+    QRect rect = widget->geometry();
-        }
+    rect.translate(widget->parentWidget()->mapToGlobal(QPoint(0, 0)));
-    }
+    rect.adjust(-expandSize, -expandSize, expandSize, expandSize);
-    return false;
+    return rect.contains(globalPos);
 }
 
+
 void MainWidget::onLabelFaultRusumePressed(){
     if(sysPara){
         sysPara->status.flagOfSpeedAlarm = false;

mainwidget.h

@@ -113,7 +113,8 @@ public:
 
     AlarmStatus alarmStatus;
 
-    bool eventFilter(QObject *watched, QEvent *event) override;
+//    void mouseDoubleClickEvent(QMouseEvent *event) override;
+
 private:
     // UI对象
     Ui::MainWidget ui;
@@ -148,6 +149,16 @@ private:
     int dlgMyWarringShowDlyCnt;
 
     SetNumDlg* m_setNumDlg = nullptr;
+
+    //------自定义双击------
+    QPoint m_lastClickPos;
+    qint64 m_lastClickTime = 0;
+    const int m_doubleClickDistance = 25;  // 自定义距离阈值（像素）
+    const int m_doubleClickInterval = 500; // 自定义时间阈值（毫秒）
+    void mousePressEvent(QMouseEvent *event) override;
+    void handleDoubleClick(QMouseEvent *event);
+    bool isInExpandedRect(QWidget* widget, const QPoint& globalPos, int expandSize);
+    //--------------------
 public slots:
     void powerOffConfirmed();
     void on_m_StartBtn_clicked();
@@ -191,6 +202,8 @@ signals:
 
     void repeatInitedPid();
     void clearPressureFault();
+
+    void newFileAcquired();
 };
 
 #endif // MainWidget_H

scene/BarcodeEditor.cpp

@@ -345,7 +345,7 @@ void BarcodeEditor::onBarcodeFormatConfirmed()
 void BarcodeEditor::onQrcodeFormatConfirmed()
 {
     m_vm.format.setValue(m_qrcodeFormatEditor.viewModel());
-    m_vm.type = BARCODE_TYPE_QRCODE;
+//    m_vm.type = BARCODE_TYPE_QRCODE;
     
     auto b = ui->cbBoxType->blockSignals(true);
     ui->cbBoxType->setCurrentIndex(int(m_vm.type));
@@ -586,3 +586,12 @@ QString BarcodeViewModel::toString(const BarcodeViewModel &vm)
 
     return str;
 }
+
+void BarcodeEditor::on_cbBoxType_currentIndexChanged(int index)
+{
+    //bar 0; qr 1; dm 2;
+    m_vm.type = index;
+    if (index == 0) return;
+    m_qrcodeFormatEditor.setCodeType(ui->cbBoxType->currentText());
+    onQrcodeFormatConfirmed();
+}

scene/BarcodeEditor.h

@@ -15,8 +15,9 @@ class DateReplaceEditor;
 class CounterEditor;
 
 enum BarcodeType {
-    BARCODE_TYPE_BARCODE,
+    BARCODE_TYPE_BARCODE = 0,
-    BARCODE_TYPE_QRCODE,
+    BARCODE_TYPE_QRCODE = 1,
+    BARCODE_TYPE_DMCODE = 2,
 };
 
 /**
@@ -179,6 +180,8 @@ private slots:
 
     void onTypeChanged(int i);
 
+    void on_cbBoxType_currentIndexChanged(int index);
+
 protected:
     virtual bool eventFilter(QObject* obj, QEvent* event) override;
 

scene/BarcodeEditor.ui

@@ -277,7 +277,12 @@ QSpinBox::down-arrow {
      </item>
      <item>
       <property name="text">
-       <string>二维码</string>
+       <string>QRCode</string>
+      </property>
+     </item>
+     <item>
+      <property name="text">
+       <string>DataMatrix</string>
       </property>
      </item>
     </widget>
@@ -291,7 +296,7 @@ QSpinBox::down-arrow {
       </rect>
      </property>
      <property name="text">
-      <string>条形码格式</string>
+      <string>码格式</string>
      </property>
     </widget>
     <widget class="QGroupBox" name="groupBox">

scene/DlgBarcodeFormat.ui

@@ -79,7 +79,7 @@ QComboBox::drop-down {
 
 /* 下拉箭头图标 */
 QComboBox::down-arrow {
-    image: url(image/down_white.png);
+    image: url(:/image/down_white.png);
     width: 16px;   /* 图标显示宽度 */
     height: 16px;  /* 图标显示高度 */
 }
@@ -107,7 +107,7 @@ QSpinBox::up-button {
 }
 
 QSpinBox::up-arrow {
-    image: url(image/up_white.png);
+    image: url(:/image/up_white.png);
 }
 
 QSpinBox::down-button {
@@ -119,7 +119,7 @@ QSpinBox::down-button {
 }
 
 QSpinBox::down-arrow {
-    image: url(image/down_white.png);
+    image: url(:/image/down_white.png);
 }
 </string>
   </property>

scene/DlgQrcodeFormat.cpp

@@ -7,6 +7,7 @@ DlgQrcodeFormat::DlgQrcodeFormat(QWidget *parent) :
 {
     ui->setupUi(this);
     setViewModel(m_vm);
+    ui->comboBoxType->setEnabled(false);
 }
 
 DlgQrcodeFormat::~DlgQrcodeFormat()
@@ -31,3 +32,9 @@ DlgQrcodeFormatVM DlgQrcodeFormat::viewModel()
     m_vm.size = QRCodeSize(ui->comboBox_DMType->currentIndex());
     return m_vm;
 }
+
+void DlgQrcodeFormat::setCodeType(QString type)
+{
+    // type = "QRCode"  "DataMatrix"
+    ui->comboBoxType->setCurrentText(type);
+}

scene/DlgQrcodeFormat.h

@@ -51,6 +51,7 @@ public:
 
     DlgQrcodeFormatVM viewModel();
 
+    void setCodeType(QString type);
 private:
     Ui::DlgQrcodeFormat *ui;
 

scene/DlgQrcodeFormat.ui

@@ -82,7 +82,7 @@ QComboBox::drop-down {
 
 /* 下拉箭头图标 */
 QComboBox::down-arrow {
-    image: url(image/down_white.png);
+    image: url(:/image/down_white.png);
     width: 16px;   /* 图标显示宽度 */
     height: 16px;  /* 图标显示高度 */
 }
@@ -110,7 +110,7 @@ QSpinBox::up-button {
 }
 
 QSpinBox::up-arrow {
-    image: url(image/up_white.png);
+    image: url(:/image/up_white.png);
 }
 
 QSpinBox::down-button {
@@ -122,7 +122,7 @@ QSpinBox::down-button {
 }
 
 QSpinBox::down-arrow {
-    image: url(image/down_white.png);
+    image: url(:/image/down_white.png);
 }
 </string>
   </property>

scene/ItemCommon.cpp

@@ -460,7 +460,7 @@ QImage ItemUtils::generateBarcodeImage(const QString &content, BarcodeType type,
         return QImage();
     }
 
-    if (type == BARCODE_TYPE_QRCODE) {
+    if (type == BARCODE_TYPE_QRCODE || type == BARCODE_TYPE_DMCODE) {
         // 优先级：完整VM配置 > 简化int配置 > 默认配置
         // 原因：支持从UI直接传递结构体，同时保留向后兼容的快速路径
         if (format.canConvert<DlgQrcodeFormatVM>()) {

scene/pictextitem.cpp

@@ -440,11 +440,6 @@ QImage PicTextItem::strToImage(const QString &str)
     QPainter painter;
     QFontMetrics fm(font());
     QImage img(fm.horizontalAdvance(str), fm.height(), QImage::Format_ARGB32);
-    qDebug() << "strToImage: letterSpace: " << letterSpace();
-    
-    if(letterSpace() == 2) {
-        qDebug() << "Break point";
-    }
 
     QRgb txtColor   = colorReversal() ? 0xffffffff : 0xff000000;
     QRgb bgColor    = colorReversal() ? 0xff000000 : 0x00000000;

testprintwidget.cpp

@@ -20,9 +20,7 @@
 
 #pragma execution_character_set("utf-8")
 
-extern unsigned char vartypeR;
+
-//extern QMap<int,QStringList> replaceValueMap;
-extern QMap<int,QMap<int,QString>> replaceValueMap;
 TestPrintWidget::TestPrintWidget(QWidget* parent)
     : QWidget(parent)
 {
@@ -45,8 +43,6 @@ TestPrintWidget::TestPrintWidget(QWidget* parent)
     m_ButtonGroup->addButton(ui.btnArrow, 6);
     // m_ButtonGroup->addButton(ui.btnList, 7);
 
-    dialogFontSize = new DialogFontSize(0);
-
     dialogSaveFile =new DialogSaveFile(0);
 
     dialogFileOperation = new DialogFileOperation(0);
@@ -56,13 +52,10 @@ TestPrintWidget::TestPrintWidget(QWidget* parent)
     m_pSavePicScene->setSceneRect(QRectF(0, 0, 3200, MAX_PRINT_ROW_NUM)); //生成图片的场景
 
     editMode = SCENE;
-    // 窗口基础设置（UI文件已配置，此处可保留或移除）
-    setWindowTitle("Testprint");
-    resize(800, 600);
-    // setStyleSheet("QWidget { font-family: Arial; font-size: 12px; }");
 
     m_TextEdit = new QTextEdit(0);
     m_TextEdit->setLineWrapMode(QTextEdit::NoWrap);
+
     // 获取文档并设置边距为0
     m_TextEdit->document()->setDocumentMargin(0);
     QFont font;
@@ -79,14 +72,11 @@ TestPrintWidget::TestPrintWidget(QWidget* parent)
  //   ui->senceEditOption->bindScene(pPicScene, ui->graphicsView, ui->textEdit);
     this->pPicScene->setIsdrawBackground(true);
 
+    // 哪个天才写的？拿view和scene计算一下会死吗？
     for(int i=0;i<3;i++){
         on_enlargeButton_pressed();
     }
 
-//    connect(dialogSaveFile,SIGNAL(saveFile(QString,bool)),this,SLOT(onSaveASFile(QString,bool)));
-
-//    ui.graphicsView->installEventFilter(this);
-
     connect(pPicScene,&PicScene::selectionChanged,this,[=]() {
         getShowSelectItemText();
     });
@@ -114,10 +104,6 @@ TestPrintWidget::TestPrintWidget(QWidget* parent)
     connect(ui.btnListConfig, &QPushButton::clicked, [this]() {
         emit sendButtonClickedSignal(9);
         });
-//     connect(ui.btnAConfig, &QPushButton::clicked, [this]() {
-//         emit sendButtonClickedSignal(10);
-// //        on_buttonSelectFont_pressed();
-//         });
 
     connect(ui.btnItemConfig, &QPushButton::clicked, this, &TestPrintWidget::onBtnItemConfigClicked);
 
@@ -127,15 +113,6 @@ TestPrintWidget::TestPrintWidget(QWidget* parent)
         on_delButton_pressed();
         });
 
-    // 分辨率下拉框（保留原空逻辑）
-    // mei le
-
-    // 地区下拉框（保留原空逻辑）
-    connect(ui.cbLocale, QOverload<int>::of(&QComboBox::currentIndexChanged),
-        [=](int index) {
-            //qDebug() << "选择地区：" << ui.cbLocale->currentText();
-        });
-
     // 控制区第一行按钮
     connect(ui.m_btnLeft_Control1, &QPushButton::clicked, this, &TestPrintWidget::selectPreviousItem);
     connect(ui.m_btnRight_Control1, &QPushButton::clicked, this, &TestPrintWidget::selectNextItem);
@@ -220,8 +197,6 @@ TestPrintWidget::TestPrintWidget(QWidget* parent)
     m_LineEdit->setProperty("Enter replace enter", true);
     connect(m_LineEdit, &QLineEdit::returnPressed, this, &TestPrintWidget::onLineEditReturnPressed);
 
-    initSelecteCodeDlg();
-
     // 网络通信，暂时屏蔽
     // ui.btnList->hide();
 }
@@ -284,6 +259,8 @@ void TestPrintWidget::on_enlargeButton_pressed()
 //    qDebug() << pViewer->devicePixelRatioFScale();
 //    qDebug() << pViewer->devicePixelRatioF();
 //    pViewer->scale(scaleFactor, scaleFactor);
+
+    // TODO:: 保留，以后真的要用到放大缩小
     ((MyView*)pViewer)->ZoomOut();
 }
 
@@ -291,7 +268,6 @@ void TestPrintWidget::on_addButton_pressed(const SourceType type)
 {
     addItemFlag = false;
     m_LineEdit->setEnabled(true);
-    m_TextEdit->clear();
     m_LineEdit->setText("");
     pPicScene->clearSelection();
     textItem = new PicTextItem(0, 0, type);
@@ -310,172 +286,29 @@ void TestPrintWidget::on_addButton_pressed(const SourceType type)
     textItem->setPlainText("");
     textItem->setSelected(true);
 
-    if(varReplaceItemMap.size()>0){
-        QMap<int, ItemReplaceInfo> newMap;
-        for (auto it = varReplaceItemMap.begin(); it != varReplaceItemMap.end(); ++it) {
-            newMap.insert(it.key() + 1, it.value());  // key直接+1
-        }
-        varReplaceItemMap = newMap;  // 原子替换
-    }
-
     addItemFlag = true;
 }
 
 void TestPrintWidget::onEditItemDone()
 {
-    //Scene Test
+    const QString content = m_LineEdit->text();
-    QList<QGraphicsItem *> items=pPicScene->items();
-    int index=0;
-    bool flag = false;
-    for(int i=0;i<items.size();i++){
-        index=i;
-        if(items.at(i)->isSelected()){
-            flag = true;
-            break;
-        }
-    }
-
-    QString content = m_LineEdit->text();
-    m_TextEdit->setText(content);
-    if(!flag){
-        return;
-    }
-
-    if(!m_TextEdit->toHtml().contains("<img src=")){
-        QString content = m_LineEdit->text();
-        m_TextEdit->clear();
-        m_TextEdit->setText(content);
-    }
-
     foreach (QGraphicsItem *item, pPicScene->selectedItems())
     {
         PicTextItem *pTextItem = (PicTextItem *)item;
-        QFont font = pTextItem->font();
+        if(pTextItem->sourceType() == SourceType::TEXT)
-        font.setLetterSpacing(QFont::AbsoluteSpacing,sysPara->para.textEditCharSpace);
-        font.setStyleStrategy(QFont::NoAntialias);
-        pTextItem->setLetterSpace(sysPara->para.textEditCharSpace);
-        pTextItem->setFont(font);
-        m_TextEdit->setFont(font);
-
-        createItemImage();
-        QString html = "<img src=\"/home/plg/doc/scene.png\" />";
-        m_TextEdit->setHtml(html);
-
-        pTextItem->setHtml(m_TextEdit->toHtml());
             pTextItem->setSource(content);
     }
 }
 
-void TestPrintWidget::onEditItemCounterDone(){
-
-    //Scene Test
-    QList<QGraphicsItem *> items=pPicScene->items();
-    int index = checkSelectScene();
-    if (index < 0) return;
-
-    QString html = m_TextEdit->toHtml();
-
-    // 计数器1、2的source值  image path: "/7/7...."
-    QString source = html.contains("7/7")? SOURCE_COUNTER1 : SOURCE_COUNTER2;
-
-    foreach (QGraphicsItem *item, pPicScene->selectedItems())
-    {
-        PicTextItem *pTextItem = (PicTextItem *)item;
-        QFont font = pTextItem->font();
-         font.setLetterSpacing(QFont::AbsoluteSpacing,sysPara->para.textEditCharSpace);
-        font.setStyleStrategy(QFont::NoAntialias);
-        pTextItem->setFont(font);
-        pTextItem->setSource(source);
-
-        if(!m_TextEdit->toHtml().contains("<img src=")){
-            //把当前内容保存为图片
-            createItemImage();
-            //将图片设置到编辑器里
-            QString html = "<img src=\"/home/plg/doc/scene.png\" />";
-            m_TextEdit->setHtml(html);
-        }
-
-        pTextItem->setHtml(m_TextEdit->toHtml());
-    }
-}
-
-void TestPrintWidget::onReplaceVarEditDone()
-{
-    //Scene Test
-    QList<QGraphicsItem *> items=pPicScene->items();
-    int index=0;
-    for(int i=0;i<items.size();i++){
-        index=i;
-        if(items.at(i)->isSelected()){
-            break;
-        }
-    }
-
-    foreach (QGraphicsItem *item, pPicScene->selectedItems())
-    {
-        if(item)
-        {
-            PicTextItem *pTextItem = (PicTextItem *)item;
-            QFont font = pTextItem->font();
-//            font.setLetterSpacing(QFont::AbsoluteSpacing,sysPara->para.textEditCharSpace);
-            pTextItem->setFont(font);
-
-            if(!m_TextEdit->toHtml().contains("<img src=")){
-                createItemImage();
-                QString html = "<img src=\"/home/plg/doc/scene.png\" />";
-                m_TextEdit->setHtml(html);
-            }
-//           std::cout<<"m_TextEdit:"<<m_TextEdit->toHtml().toStdString()<<std::endl;
-            pTextItem->setHtml(m_TextEdit->toHtml());
-        }
-    }
-}
-
-void TestPrintWidget::createItemImage()
-{
-    int coldot = (int)m_TextEdit->document()->size().width();
-    QSize size(coldot,20);
-//    doc->adjustSize();
-//    QSize docSize = doc->size().toSize();
-    m_TextEdit->document()->adjustSize();  // 或 m_TextEdit->document()->size().toSize();
-    m_TextEdit->adjustSize();
-    QSize docSize = m_TextEdit->document()->size().toSize();
-    QImage image(docSize,QImage::Format_ARGB32);
-   // image.fill(0x00ffffff);//填充白色
-    image.fill(Qt::transparent);
-    QPainter painter(&image);
-    m_TextEdit->document()->drawContents (&painter, image.rect());		/*将text写到pic*/
-    image.save("/home/plg/doc/scene.png");
-}
-
 void TestPrintWidget::getShowSelectItemText()
 {
     //Scene Test
-    QList<QGraphicsItem *> items=pPicScene->items();
-    int index=0;
-    bool flag = false;
-    for(int i=0;i<items.size();i++){
-        index=i;
-        if(items.at(i)->isSelected()){
-            flag = true;
-            break;
-        }
-    }
 
-    if(flag){
-        if(varReplaceItemMap.contains(index) && addItemFlag){
-            ui.m_LineEdit->setEnabled(false);
-            ui.m_LineEdit->setText("{t}");
-            return;
-        }
-        else
-            ui.m_LineEdit->setEnabled(true);
-    }else{
     ui.m_LineEdit->setEnabled(false);
     ui.m_LineEdit->setText("");
-        return;
-    }
 
+    // 选择最后一个被选中的 item，防一手而已，事实上不应允许多选
+    // 直接选第一个被选中的 item，也是可以的
     auto selectedItems = pPicScene->selectedItems();
 
     PicTextItem* lastSelectedTxtItem = nullptr;
@@ -492,6 +325,7 @@ void TestPrintWidget::getShowSelectItemText()
 
         // 对于文本item，将它的文本显示到编辑框
     if(lastSelectedTxtItem->sourceType() == SourceType::TEXT) {
+        ui.m_LineEdit->setEnabled(true);
         m_LineEdit->setText(lastSelectedTxtItem->source().toString());
     }
 
@@ -512,9 +346,11 @@ void TestPrintWidget::getShowSelectItemText()
         return;
     }
 
+    // 锁住信号再设置，避免设置后触发 cbResolution 的信号
     auto b = ui.cbResolution->blockSignals(true);
     ui.cbResolution->setCurrentIndex(fontNameToIndex[currItemFontFamily]);
     ui.cbResolution->blockSignals(b);
+
     return;
 }
 
@@ -717,14 +553,6 @@ void TestPrintWidget::onFileOpen(QString filePath,bool insertFlag){
                         //qDebug()<<"textedit txt mode onFileOpen" << sysPara->sysFile;
                         snprintf(sysPara->para.lastOpenedFileName,sizeof(sysPara->para.lastOpenedFileName),"%s",filePath.toLatin1().constData());
                     }
-
-//                    emit fileNameChanged(QFileInfo(xmlfileName).fileName());
-//                    ui->saveButton->setEnabled(false);
-                    QList<QGraphicsItem *> items = pPicScene->items();
-                    foreach (QGraphicsItem *item, items) {
-                        PicTextItem *picText = qgraphicsitem_cast<PicTextItem*>(item);
-                        onSceneAccepted(picText);
-                    }
                 }
             }
 
@@ -914,54 +742,10 @@ void TestPrintWidget::parseVbfile(QXmlStreamReader &reader) {
     }
 }
 
-void TestPrintWidget::onSceneAccepted(PicTextItem *pTextItem){
-    //dialogLineSpace->getValue(&sysPara->para.textEditLineSpace,&sysPara->para.textEditCharSpace);
-    for(QTextBlock textBlock = pTextItem->document()->begin();textBlock != pTextItem->document()->end(); textBlock = textBlock.next()){
-        //        textBlock.setVisible(false);
-        QTextBlockFormat textBlockFormat = textBlock.blockFormat();
-        textBlockFormat.setAlignment(Qt::AlignTop);
-        textBlockFormat.setTopMargin(-1);
-        //textBlockFormat.setLineHeight(sysPara->para.fontPixelSize + sysPara->para.textEditLineSpace, QTextBlockFormat::FixedHeight);
-        //textBlockFormat.setLineHeight(0, QTextBlockFormat::LineDistanceHeight);
-        textBlockFormat.setBottomMargin(sysPara->para.textEditLineSpace-1);
-        //textBlockFormat.setBottomMargin(-1);
-        QTextCursor textCursor = pTextItem->textCursor();
-        textCursor.setPosition(textBlock.position());
-        textCursor.setBlockFormat(textBlockFormat);
-        pTextItem->setTextCursor(textCursor);
-    }
-
-    //	QTextCharFormat fmt;
-    //	//fmt.setFontWordSpacing(sysPara->para.textEditCharSpace);
-    //	fmt.setFontLetterSpacing(sysPara->para.textEditCharSpace); qDebug() << sysPara->para.textEditCharSpace;
-    //	mergeFormatOnWordOrSelection(fmt);
-    // pTextItem->setLetterSpace(sysPara->para.textEditCharSpace);
-    sysPara->saveParaToFile();
-}
-
-void TestPrintWidget::initSelecteCodeDlg()
-{
-    m_SelectCodeDlg = new SelectCodeDlg(this);
-    connect(m_SelectCodeDlg, &SelectCodeDlg::sig_cancelEdit, this, [=]() {
-        m_SelectCodeDlg->close();
-    } );
-
-    connect(m_SelectCodeDlg, &SelectCodeDlg::sig_editBarCode, this, [=]() {
-        m_SelectCodeDlg->close();
-        emit sendButtonClickedSignal(201);
-    } );
-
-    connect(m_SelectCodeDlg, &SelectCodeDlg::sig_editQRCode, this, [=]() {
-        m_SelectCodeDlg->close();
-        emit sendButtonClickedSignal(202);
-    } );
-}
-
 void TestPrintWidget::addCodeItem(QString str)
 {
     addItemFlag = false;
     m_LineEdit->setEnabled(true);
-    m_TextEdit->clear();
     m_LineEdit->setText("");
     pPicScene->clearSelection();
     codeItem_Operation = new PicCodeItem(0, 0, SourceType::CODE);
@@ -1163,22 +947,7 @@ void TestPrintWidget::on_delButton_pressed()
     foreach (QGraphicsItem *item, pPicScene->selectedItems()) {
         pPicScene->removeItem(item);
         delete item;
-//        ui->saveButton->setEnabled(true);
     }
-
-    if(varReplaceItemMap.size()>0){
-        QMap<int, ItemReplaceInfo> newMap;
-        for (auto it = varReplaceItemMap.begin(); it != varReplaceItemMap.end(); ++it) {
-            int oldKey = it.key();
-            if (oldKey == index) {
-                continue;  // 跳过删除项
-            }
-            int newKey = (oldKey > index) ? oldKey - 1 : oldKey;
-            newMap.insert(newKey, it.value());
-        }
-        varReplaceItemMap = newMap;
-    }
-
 }
 
 bool TestPrintWidget::eventFilter(QObject *watched, QEvent *event) {
@@ -1246,9 +1015,6 @@ void TestPrintWidget::onBtnItemConfigClicked()
     // 如果是日期类型，则唤醒DateVarSet
     if(item->data(0).toString() == "datetime") {
         // @see TestPrintWidget::addDateItem 
-        vartypeR = 0x00;
-        replaceValueMap.clear();
-        m_TextEdit->clear();
         emit sendButtonClickedSignal(16);
         return;
     }
@@ -1290,8 +1056,9 @@ void TestPrintWidget::onBtnItemConfigClicked()
 
 void TestPrintWidget::onItemEditorAccepted()
 {
-    if(itemEditor->currentItem()->source() == SourceType::UNKNOWN)
+    if(itemEditor->currentItem()->source() == SourceType::UNKNOWN) {
-        onEditItemCounterDone();
+        // Nothing....
+    }
     else {
         PicTextItem* textItem = itemEditor->currentItem();
         textItem->applyModify();
@@ -1310,7 +1077,9 @@ void TestPrintWidget::on_newfileButton_pressed(){
         pPicScene->clear();
         pViewer->viewport()->update();
         xmlfileName = "";
-        QFile file(xmlfileName);
+
+        // TODO:: 新建文件的入口
+
         sendButtonClickedSignal(21);   //新建文件完成
 }
 
@@ -1347,27 +1116,6 @@ void TestPrintWidget::slt_BarCodeItemDone()
     item->setSelected(true);
 }
 
-void TestPrintWidget::slt_QRCodeItemDone(QString str)
-{
-    if (editCodeFlag) {
-        on_delButton_pressed();
-        editCodeFlag = false;
-    }
-
-    addCodeItem(str);
-    m_TextEdit->clear();
-
-    int index = checkSelectScene();
-    if (index == -1) return;
-
-    QString html = m_TextEdit->toHtml();
-    foreach (QGraphicsItem *item, pPicScene->selectedItems())
-    {
-        PicCodeItem *pItem = (PicCodeItem *)item;
-        pItem->setHtml(html);
-    }
-}
-
 QGraphicsItem* findClosestItemToViewCenter(QGraphicsView* view) 
 {
     if (!view || !view->scene()) 
@@ -1506,29 +1254,6 @@ void TestPrintWidget::on_cbResolution_currentIndexChanged(int index)
     }
 }
 
-void TestPrintWidget::setFontNameIndex(float fontsize)
-{
-    int currIndex=0;
-
-    if(fontsize <=5 ){    //5dot -- 3.75pt
-        currIndex = 0;
-    }else if(fontsize<=7){   //7dot -- 5.25pt
-        currIndex = 1;
-    }else if(fontsize<=9){    //9dot -- 6.75
-        currIndex = 2;
-    }else if(fontsize<=12){   //12dot -- 9pt
-        currIndex = 3;
-    }else if(fontsize<=16){   //16dot -- 12pt
-        currIndex = 4;
-    }else if(fontsize<=24){  //24dot -- 18pt
-        currIndex = 5;
-    }else if(fontsize<=32){   //32dot -- 24pt
-        currIndex = 6;
-    }
-    if(currIndex<ui.cbResolution->count())
-        ui.cbResolution->setCurrentIndex(currIndex);
-}
-
 void TestPrintWidget::addDateTimeItem(const DateItemModel &model, const TextItemModel& textModel)
 {
     // 如果当前选中了一个日期时间item，则直接设置模型
@@ -1634,6 +1359,11 @@ void TestPrintWidget::addCounterItem(CounterViewModel vm, QSharedPointer<QFont>
     }
 }
 
+QString TestPrintWidget::currentFile()
+{
+    return xmlfileName;
+}
+
 void TestPrintWidget::showBarcodeEditor(bool restoreViewModel)
 {
 #if defined(ARCH_AARCH64)

testprintwidget.h

@@ -12,7 +12,6 @@
 // 包含UI自动生成的头文件
 #include "ui_TestPrintWidget.h"
 
-#include "DialogFontSize.h"
 #include "scene/picscene.h"
 
 #include "ImageLoader.h"
@@ -54,7 +53,6 @@ public:
     QTextEdit* getQTextEdit();
     PicScene* getPicScene();
 
-    void createItemImage();
     void getShowSelectItemText();
     void bindSysPara(SysPara *sysPara);
 
@@ -69,14 +67,14 @@ public:
 
     void on_delButton_pressed();
 
-    void setFontNameIndex(float);
-
     void addDateTimeItem(const DateItemModel& model, const TextItemModel& textModel);
 
     void addScheduleShiftsItem(QVector<ScheduleModel> schedules, TextItemModel txtModel);
 
     void addCounterItem(CounterViewModel vm, QSharedPointer<QFont> font = nullptr);
 
+    QString currentFile();
+
     bool addItemFlag;
 //    QString getReplateAfterStr(QString);
 //    QMap<int,QString> varReplaceItemMap;
@@ -86,9 +84,6 @@ public slots:
     void on_enlargeButton_pressed();
     void on_addButton_pressed(const SourceType type = SourceType::UNKNOWN);
     void onEditItemDone();
-    void onEditItemCounterDone();
-
-    void onReplaceVarEditDone();
 
     void on_saveButton_pressed();
     void onSaveASFile(QString filename,bool Flag);
@@ -100,8 +95,6 @@ public slots:
 
     void slt_BarCodeItemDone();
 
-    void slt_QRCodeItemDone(QString str);
-
     void selectNextItem();
 
     void selectPreviousItem();
@@ -140,7 +133,7 @@ private:
 
     // 控件成员变量（关联UI控件）
     QButtonGroup* m_ButtonGroup;
-    QTextEdit* m_TextEdit;
+    QTextEdit* m_TextEdit = nullptr;
     QLineEdit* m_LineEdit;
 
     void parseVbfile(QXmlStreamReader &reader);
@@ -155,8 +148,6 @@ private:
     // 加载图标（保留原功能）
     QPixmap loadIcon(const QString& iconName, const QSize& size = QSize(40, 40));
 
-    DialogFontSize *dialogFontSize;
-
     PicScene *pPicScene;   //保存Item的Html
     //  PicScene *pPicScene2;  // 保存Item的Html对应的图片  解决场景模式文本无法放大的问题
     QGraphicsView *view;
@@ -181,9 +172,6 @@ private:
     bool m_CreateImageFlag;
     QGraphicsScene *m_pSavePicScene;
 
-    SelectCodeDlg* m_SelectCodeDlg = nullptr;
-
-    void onSceneAccepted(PicTextItem *pTextItem);
     // 条形码和二维码的选择界面
     void initSelecteCodeDlg();
     // 在界面添加显示条形码和二维码的场景