hlp:新建文件，内容从左下角开始，使用状态机，报警内容在自检和关机时不爆红提示

2026-09-08 15:06:03 +08:00
parent 4c06500338
commit 84e20a440c
14 changed files with 722 additions and 185 deletions
@@ -0,0 +1,204 @@
+#include "PrinterStateManager.h"
+#include <QDebug>
+
+PrinterStateManager* PrinterStateManager::s_instance = nullptr;
+
+PrinterStateManager* PrinterStateManager::instance()
+{
+    if (!s_instance) {
+        s_instance = new PrinterStateManager();
+    }
+    return s_instance;
+}
+
+PrinterStateManager::PrinterStateManager()
+{
+    initTransitions();
+    m_currentState = PrinterState::IDLE;
+}
+
+PrinterStateManager::~PrinterStateManager()
+{
+}
+
+QString PrinterStateManager::stateName() const
+{
+    switch (m_currentState) {
+    case PrinterState::IDLE: return "空闲";
+    case PrinterState::SELF_CHECK: return "自检中";
+    case PrinterState::READY: return "就绪";
+    case PrinterState::PRINTING: return "打印中";
+    case PrinterState::STOPPING: return "停止中";
+    case PrinterState::ERROR: return "故障";
+    case PrinterState::POWER_OFF: return "关机中";
+    default: return "未知";
+    }
+}
+
+// ============ 初始化状态（开机时调用一次） ============
+void PrinterStateManager::initFromSysPara()
+{
+    setState(PrinterState::SELF_CHECK, "Init from sysPara");
+}
+
+// ============ 状态转移表 ============
+void PrinterStateManager::initTransitions()
+{
+    m_transitions = {
+        // 开机流程
+        {PrinterState::IDLE, PrinterEvent::PowerOn,
+         PrinterState::SELF_CHECK, "IDLE → SELF_CHECK", nullptr},
+        {PrinterState::SELF_CHECK, PrinterEvent::SelfCheckDone,
+         PrinterState::READY, "SELF_CHECK → READY", nullptr},
+        {PrinterState::SELF_CHECK, PrinterEvent::SelfCheckFailed,
+         PrinterState::ERROR, "SELF_CHECK → ERROR", nullptr},
+
+        // 打印流程
+        {PrinterState::READY, PrinterEvent::StartPrint,
+         PrinterState::PRINTING, "READY → PRINTING",
+        [this]() -> bool { return guardCanStartPrint(); }},
+
+        {PrinterState::PRINTING, PrinterEvent::StopPrint,
+         PrinterState::STOPPING, "PRINTING → STOPPING", nullptr},
+        {PrinterState::STOPPING, PrinterEvent::StopComplete,
+         PrinterState::READY, "STOPPING → READY", nullptr},
+
+        // 错误处理
+        {PrinterState::READY, PrinterEvent::ErrorOccurred,
+         PrinterState::ERROR, "READY → ERROR", nullptr},
+        {PrinterState::PRINTING, PrinterEvent::ErrorOccurred,
+         PrinterState::ERROR, "PRINTING → ERROR", nullptr},
+        {PrinterState::STOPPING, PrinterEvent::ErrorOccurred,
+         PrinterState::ERROR, "STOPPING → ERROR", nullptr},
+        {PrinterState::ERROR, PrinterEvent::ErrorCleared,
+         PrinterState::READY, "ERROR → READY", nullptr},
+
+        // 关机
+        {PrinterState::READY, PrinterEvent::PowerOff,
+         PrinterState::POWER_OFF, "READY → POWER_OFF", nullptr},
+        {PrinterState::PRINTING, PrinterEvent::PowerOff,
+         PrinterState::POWER_OFF, "PRINTING → POWER_OFF", nullptr},
+        {PrinterState::STOPPING, PrinterEvent::PowerOff,
+         PrinterState::POWER_OFF, "STOPPING → POWER_OFF", nullptr},
+        {PrinterState::ERROR, PrinterEvent::PowerOff,
+         PrinterState::POWER_OFF, "ERROR → POWER_OFF", nullptr},
+        {PrinterState::POWER_OFF, PrinterEvent::PowerOffDone,
+         PrinterState::IDLE, "POWER_OFF → IDLE", nullptr},
+    };
+}
+
+// ============ 查找转移 ============
+PrinterStateManager::Transition* PrinterStateManager::findTransition(PrinterEvent event)
+{
+    for (Transition& trans : m_transitions) {
+        if (trans.fromState == m_currentState && trans.event == event) {
+            return &trans;
+        }
+    }
+    return nullptr;
+}
+
+// ============ 请求切换状态（外部唯一接口） ============
+void PrinterStateManager::requestTransition(PrinterEvent event)
+{
+    qDebug() << "Request event:" << static_cast<int>(event)
+             << "Current:" << stateName();
+
+    m_currentState = PrinterState::READY;
+    Transition* trans = findTransition(event);
+    if (!trans) {
+        qDebug() << "Invalid transition, ignored";
+        return;
+    }
+
+    // 检查守卫条件
+    if (trans->guard) {
+        bool result = trans->guard();
+        if (!result) {
+            qDebug() << "Guard condition failed for:" << trans->description;
+            return;
+        }
+    }
+
+    // 执行状态切换（内部管理）
+    setState(trans->toState, trans->description);
+}
+
+// ============ 内部状态切换 ============
+void PrinterStateManager::setState(PrinterState newState, const QString& reason)
+{
+    if (m_currentState == newState) {
+        qDebug() << "State already:" << stateName();
+        return;
+    }
+
+    m_previousState = m_currentState;
+    m_currentState = newState;
+
+    qDebug() << "State changed:" << stateName() << "Reason:" << reason;
+
+    // 发送信号通知外部
+    emit sig_stateChanged(newState, m_previousState, reason);
+}
+
+// ============ 辅助函数 ============
+QString PrinterStateManager::stateNameFromEnum(PrinterState state) const
+{
+    switch (state) {
+    case PrinterState::IDLE: return "IDLE";
+    case PrinterState::SELF_CHECK: return "SELF_CHECK";
+    case PrinterState::READY: return "READY";
+    case PrinterState::PRINTING: return "PRINTING";
+    case PrinterState::STOPPING: return "STOPPING";
+    case PrinterState::ERROR: return "ERROR";
+    case PrinterState::POWER_OFF: return "POWER_OFF";
+    default: return "UNKNOWN";
+    }
+}
+
+// ============ 守卫条件函数 ============
+
+bool PrinterStateManager::guardReclaimTankOpen()
+{
+    if (!m_sysPara) return false;
+    return m_sysPara->status.reclainTankReachEnd == true;
+}
+
+bool PrinterStateManager::guardInkSwintOpen()
+{
+    if (!m_sysPara) return false;
+    return !(m_sysPara->status.statWarn & WARN_STATUS_INK_SWINT);
+}
+
+bool PrinterStateManager::guardNoError()
+{
+    if (!m_sysPara) return false;
+    return m_sysPara->status.statWarn == 0;
+}
+
+bool PrinterStateManager::guardNoInkWarn()
+{
+    if (!m_sysPara) return false;
+    return !(m_sysPara->status.statWarn & WARN_STATUS_INK_WARN);
+}
+
+bool PrinterStateManager::guardNoSolventWarn()
+{
+    if (!m_sysPara) return false;
+    return !(m_sysPara->status.statWarn & WARN_STATUS_SOLV_WARN);
+}
+
+bool PrinterStateManager::guardSelfCheckDone()
+{
+    if (!m_sysPara) return false;
+    return m_sysPara->status.selfCheckDone == true;
+}
+
+bool PrinterStateManager::guardCanStartPrint()
+{
+    if (!m_sysPara) return false;
+
+    // 自检完成，开回收槽，开墨线，无异常报错
+    return guardReclaimTankOpen() && guardInkSwintOpen() &&
+            guardNoError() && guardSelfCheckDone();
+}