修复因场景模式修改为绝对坐标引起的打印补全、蜂鸣器报警改为常响、添加相位故障关闭回收槽功能、取消翻转上下颠倒，与莱宾格行为同步、修改场景模式默认字体为7点、取消变量占位图设计

mainwidget.cpp

@@ -993,25 +993,6 @@ void MainWidget::on_m_StartBtn_clicked()
         sysPara->devOp->highVoltageCtrl(1);
         sysPara->devOp->setHighVoltageAmplitudetoSTM32();
         sysPara->status.waitHightVolOff = 0;
-//        if(!printintFlag)setRunStatus(tr("正在加高压..."));
-        // 复位计数器
-        if(sysPara->status.FileChangeRestCntFlag){
-            if(sysPara->para.ResetAllProductCntEn)
-            {
-                sysPara->devOp->clearProductCnt(3 | 0x10); // [3]总产品计数器清零FPGA
-                sysPara->para.totalProductCnt=0;
-            }
-            else if(sysPara->para.ResetProductCntEn)
-            {
-                sysPara->devOp->clearProductCnt(3);
-            }
-            sysPara->status.FileChangeRestCntFlag=0;
-            sysPara->saveParaToFile();
-        }
-        
-        // onPreviewScene 没有必要再次调用，评估后删除 byons@2026年7月28日
-        if(sysPara->para.EditMode == SCENE)
-            onPreviewScene();
 
         if(sysPara->status.currPrintCol > (MaxCol4000?MAX_PRINT_COL_NUM_Normal:MAX_PRINT_COL_NUM_Wide)){
             QMessageBox::critical(0,tr("错误"),tr("当前总列数 %1 ,支持的总列数为 %2,请减少打印串的长度").arg(sysPara->status.currPrintCol).arg((MaxCol4000?MAX_PRINT_COL_NUM_Normal:MAX_PRINT_COL_NUM_Wide)));
@@ -1025,7 +1006,7 @@ void MainWidget::on_m_StartBtn_clicked()
         {
             int dotNumPerCol = sysPara->status.currPrintRow*(1 + sysPara->para.printRowDelay) + sysPara->para.printColDelay;
             long printTmUs = 1.0f*dotNumPerCol*(1 + sysPara->para.charBold)*sysPara->status.currPrintCol*(2*sysPara->para.divideRatio)/(FPGA_SYS_HZ/1000000);
-            if((printTmUs/1000  + 3) > (sysPara->para.printDelayMs)
+            if((printTmUs/1000  + 3) > (sysPara->para.printDelayMs)\
                     && (sysPara->para.timeTriggerPrintMode == TIME_TRIGGER_PRINT_MODE_HEAD_TO_HEAD)
                     && (sysPara->para.printTriggerMode == PRINT_TRIGGER_TIME )
                     ) // 在电眼方式下，是否需要判呢？
@@ -1127,7 +1108,7 @@ void MainWidget::SendPrintDataToFpga(unsigned char alterEnable, bool isUpdate)
     }
 
     sysPara->devOp->fpgaWr(0,blankDat1,sizeof(blankDat1));//...所加的空白偏移地址
-    // 交替打印处理
+
     unsigned char *dat;
     size_t sizeofdat;
     bool MaxCol4000;
@@ -1142,10 +1123,11 @@ void MainWidget::SendPrintDataToFpga(unsigned char alterEnable, bool isUpdate)
         dat =sysPara->status.printDat;
         sizeofdat = sizeof(sysPara->status.printDat);
     }
-        if(sysPara->status.currPrintCol* MAX_PRINT_ROW_BYTE_NUM <= 20000)
-            sysPara->devOp->fpgaWr(sizeof(blankDat1),dat, sysPara->status.currPrintCol* MAX_PRINT_ROW_BYTE_NUM);
-        else
-            sysPara->devOp->fpgaWrD2(sizeof(blankDat1),dat, sysPara->status.currPrintCol* MAX_PRINT_ROW_BYTE_NUM);
+
+    if(sysPara->status.currPrintCol* MAX_PRINT_ROW_BYTE_NUM <= 20000)
+        sysPara->devOp->fpgaWr(sizeof(blankDat1),dat, sysPara->status.currPrintCol* MAX_PRINT_ROW_BYTE_NUM);
+    else
+        sysPara->devOp->fpgaWrD2(sizeof(blankDat1),dat, sysPara->status.currPrintCol* MAX_PRINT_ROW_BYTE_NUM);
 
 
     static QElapsedTimer bnsTimer;
@@ -2047,7 +2029,7 @@ void MainWidget::onPreviewScene()
 //    int maxPicHeight = qMin(sceneRect.height(), int(sysPara->para.canvasHeight));
 //    QSize size(coldot,maxPicHeight);
     int coldot = qMin(int(contentRect.right()), MaxCol4000 ? MAX_PRINT_COL_NUM_Normal : MAX_PRINT_COL_NUM_Wide);
-    QSize size(MAX_PRINT_COL_NUM_Normal,sysPara->para.canvasHeight);
+    QSize size(coldot, sysPara->para.canvasHeight);
 
 
     if(size.isEmpty()) {
@@ -2131,67 +2113,26 @@ void MainWidget::onPreviewScene()
             varPara.letterSpace = counterItem->letterSpace();
 
             ++sysPara->status.variNum;
-
-            // // 将变量序号、类型、数字个数、大小位置打印到日志
-            // LogInfo::setRunStatusText("Variable " + QString::number(varI) + ": type=" + QString::number(varPara.type) +
-            //                           "\n digitalNum=" + QString::number(varPara.digitalNum) +
-            //                           "\n width=" + QString::number(varPara.width) +
-            //                           "\n height=" + QString::number(varPara.height) +
-            //                           "\n startColPos=" + QString::number(varPara.startColPos) +
-            //                           "\n endRowPos=" + QString::number(varPara.endRowPos) +
-            //                           "\n startRowPos=" + QString::number(varPara.startRowPos) +
-            //                           "\n letterSpace=" + QString::number(varPara.letterSpace));
         }
 
         pPicScene->render(&painter, itemRect, sourceRect);
     }
 
-    sysPara->status.currPrintRow = contentRect.bottom();
-    sysPara->status.currPrintCol = contentRect.right();
+    sysPara->status.currPrintRow = size.height();
+    sysPara->status.currPrintCol = size.width();
 
     imageToPrintData(image, 0, 0);
 
-    // /*--------------------------------------------------------------------------*/
-    // generateCharRamData();
-
     generateCharRamDataV2();
-
-    if(sysPara->status.currPrintRow>MAX_PRINT_ROW_NUM-1)sysPara->status.currPrintRow=MAX_PRINT_ROW_NUM-1;
-    sysPara->status.currPrintRow = qMin(sysPara->status.currPrintRow, MAX_PRINT_ROW_NUM-1);
-
-    // 计算末行位置
-    bool found = false;
-    int lastRow = sysPara->status.currPrintRow;
-    for(int j = sysPara->status.currPrintRow; j > 2 ; j--){		
-        for(int i = 0; i < coldot; i++){
-            if(dat[MAX_PRINT_ROW_BYTE_NUM*i + j/8] & (1 << (j%8))){
-                lastRow = j+1;
-                found = true;//qDebug()<<"fOUND:"<<i<<j<<dat[MAX_PRINT_ROW_BYTE_NUM*i + j/8]<<sysPara->status.currPrintRow;
-                break;
-            }
-        }
-        if(found)
-            break;
-    }
-
-    sysPara->status.currPrintRow = qBound(1, lastRow, MAX_PRINT_ROW_NUM - 1);
     
-    int wmax = sysPara->status.currPrintRow;
-    sysPara->status.currAlterPrintRow = sysPara->status.currPrintRow/2;
-    if(sysPara->para.alterPrint.enable<1) sysPara->para.AlterMode=0;
-    else {
-        if(sysPara->para.AlterMode==0)sysPara->para.AlterMode=1;
-        wmax = sysPara->status.currAlterPrintRow;
-    }
     /*-------------------------------切换到显示窗口-----------------------------------*/
 
     qDebug()  << "currPrintCol: " << sysPara->status.currPrintCol;
     LogInfo::setRunStatusText("currPrintCol: " + QString::number(sysPara->status.currPrintCol));
     LogInfo::setRunStatusText("currPrintRow: " + QString::number(sysPara->status.currPrintRow));
-    LogInfo::setRunStatusText(QString("Items bounding rect: {%1, %2}").arg(sceneRect.width()).arg(sceneRect.height()));
     
     // sysPara->status.currPrintRow = sceneRect.height();
-    sysPara->status.currPrintCol = sceneRect.width();
+    // sysPara->status.currPrintCol = sceneRect.width();
     
     auto rows = sysPara->para.AlterMode?sysPara->status.currAlterPrintRow : sysPara->status.currPrintRow;
     rows = std::max(rows, (m_PrintDisplay->parentWidget()->height() / m_PrintDisplay->currScaleRatio()));
@@ -2207,12 +2148,6 @@ void MainWidget::handleEmptySize()
     bool MaxCol4000 = sysPara->status.flagOfNo67FPGA ? true : false;
     QSize emptySize(MaxCol4000 ? MAX_PRINT_COL_NUM_Normal : MAX_PRINT_COL_NUM_Wide, MAX_PRINT_ROW_NUM);
 
-    // 不是，渲染这个有什么用处吗？byons@2026年7月21日
-    // QImage emptyImage(emptySize, QImage::Format_ARGB32);
-    // emptyImage.fill(0x00ffffff); // 填充白色背景，与正常场景渲染一致
-    // QPainter emptyPainter(&emptyImage);
-    // pPicScene->render(&emptyPainter, QRectF(), QRectF(0, 0, emptySize.width(), emptySize.height()));
-
     // 初始化打印参数，避免空场景导致的参数异常
     sysPara->status.currPrintRow = 0;
     sysPara->status.currPrintCol = 0; // emptySize.width();
@@ -2496,15 +2431,11 @@ bool MainWidget::updatePhaseIndicatorLight(){
                 }
             }
             else if(sysPara->para.suspendAfterPhaseFault){
-                if(sysPara->para.stopCounterMeterAfterFault){
-                    if(startPrintingFlag && printintFlag){		//已经在打印，则暂停打印
-//                        on_pushButtonPausePrint_pressed();
-                        on_m_StopBtn_clicked();
-                        LogInfo::setRunStatusText(tr("相位故障，暂停打印"));
-                        setRunStatus(tr("相位故障，暂停打印"));
-                        strTitle = tr("相位故障，暂停打印");
-
-                    }
+                if(sysPara->status.isPrinting){		//已经在打印，则暂停打印
+                    on_m_StopBtn_clicked();
+                    LogInfo::setRunStatusText(tr("相位故障，暂停打印"));
+                    setRunStatus(tr("相位故障，暂停打印"));
+                    strTitle = tr("相位故障，暂停打印");
                 }
                 else if(!sysPara->status.DACDisable){
                     sysPara->devOp->printCtrl(PRINT_CTRL_DAC_DISABLE);
@@ -2512,9 +2443,14 @@ bool MainWidget::updatePhaseIndicatorLight(){
                     LogInfo::setRunStatusText(tr("相位故障，屏蔽DAC输出"));
                     setRunStatus(tr("相位故障，屏蔽充电"));
                     strTitle = tr("相位故障，屏蔽充电");
-
                 }
+            }
 
+            if(sysPara->para.closeReclaimTankWhenPhaseFault) {
+                on_m_LeftBtn_clicked();
+                LogInfo::setRunStatusText(tr("相位故障, 关闭回收槽"));
+                setRunStatus(tr("相位故障，关闭回收槽"));
+                strTitle = tr("相位故障，关闭回收槽");
             }
         }
     }