2026年7月16日 缓存

CounterVarSet.cpp

@@ -204,6 +204,14 @@ void CounterVarSet::applyUIPara(){
 
         sysPara->devOp->writeFpgaCalandar(0);
 
+        // unsigned int flags = 0;
+        // if(sysPara->status.cnt1CurrentValueInitDoneFlag)
+        //     flags = 1 << 2;
+
+        // if(sysPara->status.cnt2CurrentValueInitDoneFlag)
+        //     flags |= 1 << 3;
+
+        // sysPara->devOp->clearProductCnt(flags);
     }
 }
 
@@ -228,6 +236,9 @@ void CounterVarSet::updateSysParaToUI(){
 
         ui->eleCNT2IncEn->setChecked( (sysPara->para.eleEyeClearCntInSynMode & 0x20)?1:0);
         // ui->radCNT2ResetEn->setChecked( (sysPara->para.eleEyeClearCntInSynMode & 0x20)?0:1);
+
+        ui->checkBoxResetCnt1CurrValue->setChecked(false);
+        ui->checkBoxResetCnt2CurrValue->setChecked(false);
     }
 
 }

DevOp.cpp

@@ -2562,8 +2562,8 @@ int DevOp::writeFpgaPrintPara(bool ignoreWarn){
         }
     }
     else if(sysPara->status.build_dat.builTime == 73){
-        writeDacValue2Fpga_No73();
         if(sysPara->status.currVoltageVersion != sysPara->status.lastVoltageVersion){
+            writeDacValue2Fpga_No73();
             sysPara->status.lastVoltageVersion = sysPara->status.currVoltageVersion;
         }
     }
@@ -3226,11 +3226,11 @@ void DevOp::writeFpgaCalandar(bool Enable){
         step = 1;
     step = step < 0?(100000000 + step):step;
     sysPara->para.calandar_and_dat.cnt2Step = QString::number(step).toUInt(0,16);
-
+    // 与vx5相反，调换过值位置，比如0:4改为4:0
     sysPara->para.calandar_and_dat.cntCurrValueInitEnable =
-            (sysPara->status.cnt3CurrentValueInitDoneFlag?0:4)+
+            (sysPara->status.cnt3CurrentValueInitDoneFlag?4:0)+
-            (sysPara->status.cnt2CurrentValueInitDoneFlag?0:2)
+            (sysPara->status.cnt2CurrentValueInitDoneFlag?2:0)
-            + (sysPara->status.cnt1CurrentValueInitDoneFlag?0:1);
+            + (sysPara->status.cnt1CurrentValueInitDoneFlag?1:0);
 
     fpgaWr(WRITE_CALENDAR_DAT_ADDR,(unsigned char *)&sysPara->para.calandar_and_dat,sizeof(sysPara->para.calandar_and_dat));
 
@@ -3248,9 +3248,9 @@ void DevOp::writeFpgaCalandar(bool Enable){
     sysPara->para.Counter4.cnt4CurrValue= QString::number(sysPara->para.cnt4CurrValue).toUInt(0,16); //计数器4当前值用于隐藏功能
     fpgaWr(WRITE_COUNTER4_ADDR,(unsigned char *)&sysPara->para.Counter4,sizeof(sysPara->para.Counter4));
 
-    sysPara->status.cnt3CurrentValueInitDoneFlag = true;
+    sysPara->status.cnt3CurrentValueInitDoneFlag = false;
-    sysPara->status.cnt2CurrentValueInitDoneFlag = true;
+    sysPara->status.cnt2CurrentValueInitDoneFlag = false;
-    sysPara->status.cnt1CurrentValueInitDoneFlag = true;
+    sysPara->status.cnt1CurrentValueInitDoneFlag = false;
 }
 unsigned char dataOfvariNum[1];
 unsigned char dataOfreg_var_print_ctrl[8][8];
@@ -3644,7 +3644,7 @@ void DevOp::writeSyncAndDelayPrintCount(bool enb, uint32_t maxCount)
     buffer[3] = (maxCount >> 16) & 0xFF;
     buffer[4] = (maxCount >> 24) & 0xFF;
 
-    fpgaWr(MAX_REPEAT_COUNT_DELAY_SYNC, &buffer, sizeof(buffer));
+    fpgaWr(MAX_REPEAT_COUNT_DELAY_SYNC, buffer, sizeof(buffer));
 }
 
 void DevOp::resendSTM32Date(int cmd, int addr, unsigned char *dat, int len, int type)

DialogSaveFile.cpp

@@ -32,7 +32,8 @@ DialogSaveFile::DialogSaveFile(QWidget *parent) :
 
 }
 
-void DialogSaveFile::refreshListView(int mode){
+void DialogSaveFile::refreshListView(int mode)
+{
 
 	QString dirPath = ui->radioButtonLocal->isChecked()?DOC_ROOT_DIR:UDISK_DOC_ROOT_DIR;
 	QDir dir(dirPath);

DigitalInput.cpp

@@ -5,9 +5,10 @@
 #include <QSpinBox>
 #include <QSpinBox>
 #include <QDebug>
+#include <QKeyEvent>
 
 DigitalInput::DigitalInput(MyInputMethod *myInputMethod,QWidget *parent) :
-    QWidget(parent,(Qt::WindowStaysOnTopHint | Qt::FramelessWindowHint | Qt::Tool|Qt::WindowDoesNotAcceptFocus|Qt::BypassWindowManagerHint)),
+    QWidget(parent,(Qt::FramelessWindowHint )),
     ui(new Ui::DigitalInput)
 {
     ui->setupUi(this);
@@ -31,6 +32,14 @@ DigitalInput::DigitalInput(MyInputMethod *myInputMethod,QWidget *parent) :
 
     connect(ui->enterBtn, &QPushButton::clicked, this, &DigitalInput::onEnterPressed);
     connect(ui->clrBtn, &QPushButton::clicked, this, &DigitalInput::onClrPressed);
+
+    // 所有键盘按钮不接收焦点，避免点击按钮时 traceEdit 丢失焦点
+    QList<QPushButton*> btns = findChildren<QPushButton*>();
+    for (QPushButton* btn : btns) {
+        btn->setFocusPolicy(Qt::NoFocus);
+    }
+
+    ui->traceEdit->setFocusPolicy(Qt::StrongFocus);
 }
 
 DigitalInput::~DigitalInput()
@@ -41,21 +50,52 @@ DigitalInput::~DigitalInput()
 
 void DigitalInput::onCharPressed(){
     QPushButton * button = qobject_cast<QPushButton *>(sender());
-    QString text = button->text();
+    QString ch = button->text();
-    myInputMethod->sendString (text);
+
+    if (!m_currSpinBox) {       
+        ui->traceEdit->insert(ch);
+        return;
+    }
+
+    int cursorPos = ui->traceEdit->cursorPosition();
+    QString currentText = ui->traceEdit->text();
+    QString newText = currentText.left(cursorPos) + ch + currentText.mid(cursorPos);
+
+    if (newText.isEmpty()) {     
+        ui->traceEdit->insert(ch);
+        return;
+    }
+
+    bool ok = false;
+    int value = newText.toInt(&ok);
+    if (!ok) {                    
+        ui->traceEdit->insert(ch);
+        return;
+    }
+
+    int max = m_currSpinBox->maximum();
+    if (value <= max) {  
+        ui->traceEdit->insert(ch);
+    }
 }
 
 void DigitalInput::onKeyBackspacePressed(){
 
-    if(m_currSpinBox && QString::number(m_currSpinBox->value()).size() == 1) {
+//     if(m_currSpinBox && QString::number(m_currSpinBox->value()).size() == 1) {
-        ui->traceEdit->clear();
+//         ui->traceEdit->clear();
+//     }
+
+// #ifndef Q_OS_WIN32
+// //QWSServer::sendKeyEvent(0,Qt::Key_Backspace,Qt::NoModifier,true,false);		//锟斤拷系统锟斤拷锟酵硷拷锟斤拷锟铰硷拷
+//     MyInputMethod::sendEvent(Qt::Key_Backspace,Qt::NoModifier);
+// #endif
+    int cursorPos = ui->traceEdit->cursorPosition();
+    if (cursorPos > 0) {
+        QString text = ui->traceEdit->text();
+        text.remove(cursorPos - 1, 1);
+        ui->traceEdit->setText(text);
+        ui->traceEdit->setCursorPosition(cursorPos - 1);
     }
-
-#ifndef Q_OS_WIN32
-//QWSServer::sendKeyEvent(0,Qt::Key_Backspace,Qt::NoModifier,true,false);		//锟斤拷系统锟斤拷锟酵硷拷锟斤拷锟铰硷拷
-    MyInputMethod::sendEvent(Qt::Key_Backspace,Qt::NoModifier);
-#endif
-
 }
 
 void DigitalInput::onKeySelectAllPressed(){
@@ -85,16 +125,19 @@ void DigitalInput::onKeyDownPressed(){
 
 void DigitalInput::onEnterPressed()
 {
-    if(m_currSpinBox) {
+    hide();
-        m_currSpinBox->clearFocus();
-    }
 }
 
 void DigitalInput::onClrPressed()
 {
-    if(m_currSpinBox) {
+    // if(m_currSpinBox) {
-        m_currSpinBox->setValue(std::min(m_currSpinBox->maximum(), std::max(m_currSpinBox->minimum(), 0)));
+    //     m_currSpinBox->setValue(std::min(m_currSpinBox->maximum(), std::max(m_currSpinBox->minimum(), 0)));
-    }
+    //     ui->traceEdit->setText(m_currSpinBox->value());
+    //     // ui->traceEdit->setFocus();
+    // }
+
+    ui->traceEdit->clear();
+    ui->traceEdit->setFocus();
 }
 
 void DigitalInput::showEvent(QShowEvent *event)
@@ -104,15 +147,29 @@ void DigitalInput::showEvent(QShowEvent *event)
     QSpinBox* box = dynamic_cast<QSpinBox*>(focusWidget);
     if(!box) {
         qWarning() << "focusWidget is not QSpinBox";
+        m_currSpinBox = nullptr;
         return;
     }
 
-    if(m_currSpinBox) {
-        disconnect(m_currSpinBox, QOverload<const QString&>::of(&QSpinBox::valueChanged), ui->traceEdit, &QLineEdit::setText);
-    }
-
     m_currSpinBox = box;
     ui->traceEdit->setText(box->text());
-    connect(box, QOverload<const QString&>::of(&QSpinBox::valueChanged), ui->traceEdit, &QLineEdit::setText);
+    // focusWidget->clearFocus();
+    ui->traceEdit->setFocus();
+
+    // connect(box, QOverload<const QString&>::of(&QSpinBox::valueChanged), ui->traceEdit, &QLineEdit::setText);
     qDebug() << "The traceEdit has connected to the QSpinBox: " << box->objectName();
 }
+
+void DigitalInput::hideEvent(QHideEvent * event)
+{
+    QWidget::hideEvent(event);
+
+    if(m_currSpinBox) {
+        int value = ui->traceEdit->text().toInt();
+        int min = m_currSpinBox->minimum();
+        int max = m_currSpinBox->maximum();
+        value = qBound(min, value, max);
+        m_currSpinBox->setValue(value);
+        m_currSpinBox->clearFocus();
+    }
+}

DigitalInput.h

@@ -29,6 +29,7 @@ private slots:
 
 protected:
 	virtual void showEvent(QShowEvent* event) override;
+	void hideEvent(QHideEvent* event) override;
 
 private:
     Ui::DigitalInput *ui;

DlgCanvasHeightEditor.cpp

@@ -0,0 +1,26 @@
+#include "DlgCanvasHeightEditor.h"
+#include "ui_DlgCanvasHeightEditor.h"
+
+DlgCanvasHeightEditor::DlgCanvasHeightEditor(QWidget *parent) :
+    QDialog(parent),
+    ui(new Ui::DlgCanvasHeightEditor)
+{
+    ui->setupUi(this);
+}
+
+DlgCanvasHeightEditor::~DlgCanvasHeightEditor()
+{
+    delete ui;
+}
+
+void DlgCanvasHeightEditor::setCanvsHeight(unsigned h)
+{
+    ui->sbCanvasHeight->setValue(h);
+}
+
+unsigned DlgCanvasHeightEditor::canvasHeight() const
+{
+    return ui->sbCanvasHeight->value();
+}
+
+

DlgCanvasHeightEditor.h

@@ -0,0 +1,26 @@
+#ifndef DLGCANVASHEIGHTEDITOR_H
+#define DLGCANVASHEIGHTEDITOR_H
+
+#include <QDialog>
+
+namespace Ui {
+class DlgCanvasHeightEditor;
+}
+
+class DlgCanvasHeightEditor : public QDialog
+{
+    Q_OBJECT
+
+public:
+    explicit DlgCanvasHeightEditor(QWidget *parent = nullptr);
+    ~DlgCanvasHeightEditor();
+    
+    void setCanvsHeight(unsigned h);
+
+    unsigned canvasHeight() const;
+
+private:
+    Ui::DlgCanvasHeightEditor *ui;
+};
+
+#endif // DLGCANVASHEIGHTEDITOR_H

DlgCanvasHeightEditor.ui

@@ -0,0 +1,172 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<ui version="4.0">
+ <class>DlgCanvasHeightEditor</class>
+ <widget class="QDialog" name="DlgCanvasHeightEditor">
+  <property name="geometry">
+   <rect>
+    <x>0</x>
+    <y>0</y>
+    <width>340</width>
+    <height>226</height>
+   </rect>
+  </property>
+  <property name="windowTitle">
+   <string>窗口点阵设置</string>
+  </property>
+  <property name="styleSheet">
+   <string notr="true">QPushButton#closeBtn, QPushButton#checkBtn{
+                         background-color: #E6F7FF;
+                         border: 1px solid #87CEEB;
+                         border-radius: 4px;
+                         font-size: 24px;
+                         color: #228B22;
+                         }
+                         QPushButton#closeBtn:hover,QPushButton#checkBtn:hover{
+                         background-color: #D1E9FF;
+                         }
+
+                         QPushButton#closeBtn:pressed,QPushButton#checkBtn:pressed{
+                         background-color: #BAE7FF;
+                         }
+
+                        QPushButton {
+                            background-color: #5396C1;
+                            color: #ffffff;
+                            border: 1px solid #000000;
+                            border-radius: 3px;
+                            font-size: 18px;
+                            font-weight:500;
+                            width: 180px;
+                            height: 90px;
+                        }
+
+                        QPushButton:hover {
+                            background-color: #5396C1;
+                        }
+
+                        QPushButton:disabled {
+                            background-color: #7C828E;
+                            color: #606060;
+                            border-color: #808080;
+                        }
+</string>
+  </property>
+  <widget class="QPushButton" name="closeBtn">
+   <property name="geometry">
+    <rect>
+     <x>220</x>
+     <y>170</y>
+     <width>100</width>
+     <height>40</height>
+    </rect>
+   </property>
+   <property name="minimumSize">
+    <size>
+     <width>100</width>
+     <height>40</height>
+    </size>
+   </property>
+   <property name="text">
+    <string>✕</string>
+   </property>
+   <property name="fixedSize" stdset="0">
+    <size>
+     <width>80</width>
+     <height>80</height>
+    </size>
+   </property>
+  </widget>
+  <widget class="QPushButton" name="checkBtn">
+   <property name="geometry">
+    <rect>
+     <x>100</x>
+     <y>170</y>
+     <width>101</width>
+     <height>40</height>
+    </rect>
+   </property>
+   <property name="minimumSize">
+    <size>
+     <width>100</width>
+     <height>40</height>
+    </size>
+   </property>
+   <property name="text">
+    <string>✓</string>
+   </property>
+  </widget>
+  <widget class="QSpinBox" name="sbCanvasHeight">
+   <property name="geometry">
+    <rect>
+     <x>30</x>
+     <y>70</y>
+     <width>221</width>
+     <height>31</height>
+    </rect>
+   </property>
+   <property name="buttonSymbols">
+    <enum>QAbstractSpinBox::NoButtons</enum>
+   </property>
+   <property name="minimum">
+    <number>24</number>
+   </property>
+   <property name="maximum">
+    <number>32</number>
+   </property>
+   <property name="value">
+    <number>32</number>
+   </property>
+  </widget>
+  <widget class="QLabel" name="label">
+   <property name="geometry">
+    <rect>
+     <x>30</x>
+     <y>30</y>
+     <width>211</width>
+     <height>31</height>
+    </rect>
+   </property>
+   <property name="text">
+    <string>点阵高度</string>
+   </property>
+   <property name="alignment">
+    <set>Qt::AlignBottom|Qt::AlignLeading|Qt::AlignLeft</set>
+   </property>
+  </widget>
+ </widget>
+ <resources/>
+ <connections>
+  <connection>
+   <sender>checkBtn</sender>
+   <signal>clicked()</signal>
+   <receiver>DlgCanvasHeightEditor</receiver>
+   <slot>accept()</slot>
+   <hints>
+    <hint type="sourcelabel">
+     <x>141</x>
+     <y>196</y>
+    </hint>
+    <hint type="destinationlabel">
+     <x>141</x>
+     <y>281</y>
+    </hint>
+   </hints>
+  </connection>
+  <connection>
+   <sender>closeBtn</sender>
+   <signal>clicked()</signal>
+   <receiver>DlgCanvasHeightEditor</receiver>
+   <slot>reject()</slot>
+   <hints>
+    <hint type="sourcelabel">
+     <x>275</x>
+     <y>189</y>
+    </hint>
+    <hint type="destinationlabel">
+     <x>297</x>
+     <y>304</y>
+    </hint>
+   </hints>
+  </connection>
+ </connections>
+</ui>

InkJetPrinter.cpp

@@ -114,6 +114,29 @@ void InkJetPrinter::init()
     connect(m_TestPrintWidget, &TestPrintWidget::sig_showEditDateTime, this, &InkJetPrinter::openDatetimeEditor);
     connect(m_TestPrintWidget, &TestPrintWidget::sig_updatePrintContent, this, &InkJetPrinter::slt_updatePrintContent);
     
+    #ifndef FPGA_TEST
+    // 调入文件喷印时，主动重启打印
+    connect(m_TestPrintWidget, &TestPrintWidget::sig_stopPrint, m_MainWidget, [this](){
+        auto isPrinting = sysPara->status.isPrinting;
+        if(isPrinting) {
+            m_MainWidget->on_m_StopBtn_clicked();
+
+            QTimer::singleShot(500, [this](){
+
+                m_PrintSetting->applyPrintSettingsToSysPara(false);
+
+                m_MainWidget->on_m_StartBtn_clicked();
+                LogInfo::setRunStatusText("Restarting the print because the work file was switched.");
+            });
+        }
+        else {
+            QTimer::singleShot(300, [this](){
+            m_PrintSetting->applyPrintSettingsToSysPara(false);
+            });
+        }
+    });
+    #endif
+
     // 班时元素与编辑 连接
     connect(m_TestPrintWidget, &TestPrintWidget::sig_showScheduleShiftsEditor, this, &InkJetPrinter::showScheduleShiftsEditor);
     connect(m_scheduleShiftsEditor, &ScheduleShiftsEditor::accepted, this, &InkJetPrinter::onScheduleShiftsEditDone);
@@ -985,7 +1008,8 @@ void InkJetPrinter::timerHandler(void){
             }
 
             // byons: 时间类型图元更新 @2026年4月11日
-            if (m_MainWidget->dateTimeItemsDotUpdate()) {
+            auto updateArea = m_MainWidget->variableItemsUpdate();
+            if (!updateArea.isNull()) {
                 // // 统计追踪更新频率
                 // static QElapsedTimer bnsTimer;
                 // static int toogleCount = 0;
@@ -997,7 +1021,7 @@ void InkJetPrinter::timerHandler(void){
                 // }
 
                 if(sysPara->status.isPrinting) {
-                    m_MainWidget->SendPrintDataToFpga(0, true);
+                    m_MainWidget->SendPrintDataToFpga(0, updateArea.left(), updateArea.width());
                 }
 
                 if(m_StackedWidget->currentWidget() == m_MainWidget) {
@@ -1013,11 +1037,14 @@ void InkJetPrinter::timerHandler(void){
             if(gearPumpRunFlag || sysPara->para.gearPumpEnable == 0)
             {
                 if(!sysPara->status.selfCheckDone && sysPara->status.isPrinting){
-                    sysPara->status.selfCheckDone = true;
+                    // sysPara->status.selfCheckDone = true;
                     m_MainWidget->updatePrintDisplayLabel();
 //                    sysPara->status.flagOfAbnormalStatus = true;
                     qDebug()<<"打印过程中死机了!!!";
+                    
+                    m_MainWidget->on_m_StopBtn_clicked();
                 }
+
                 if(!sysPara->status.selfCheckDone)
                 {
                     /*开机自检*/
@@ -1075,19 +1102,20 @@ void InkJetPrinter::timerHandler(void){
 
                         // 自检结束发送打印设置
                         qInfo() << "Self check done and send print para to FPGA";
-                        sysPara->devOp->setHighVoltageAmplitudetoSTM32();
+                        // sysPara->devOp->setHighVoltageAmplitudetoSTM32();
-                        sysPara->devOp->writeFpgaCalandar(0);
+                        // sysPara->devOp->writeFpgaCalandar(0);
-                        sysPara->devOp->writeFpgaPrintPara(true);
+                        // sysPara->devOp->writeFpgaPrintPara(true);
 
-                        #ifdef __RFID_CARD
+                        // 自检完成后，关闭高电压，不知道为什么，有时候开机自检都有高压
-                        // 刷卡判定
+                        sysPara->devOp->highVoltageCtrl(0);
-                        if(sysPara->RFIDPara.inkCardTimeOut
+
-                                || sysPara->RFIDPara.solventCardTimeOut
+                        // 自检完成后，写入一遍打印设置和内容，不然好像直接开始打印不行
-                                || sysPara->RFIDPara.needMaintenance) {
+                        if(m_PrintSetting)
-                            m_MainWidget->setReclaimOpenBtnStatus(false);
+                            m_PrintSetting->applyPrintSettingsToSysPara(false);
-                            LogInfo::setRunStatusText(tr("Need maintenance."));
+
-                        }
+                        m_MainWidget->SendPrintDataToFpga(0);
-                        #endif
+
+                        m_MainWidget->on_m_StopBtn_clicked();
 
                         if(sysPara->para.Reciclar)
                             test_flag = 1;
@@ -1173,6 +1201,7 @@ void InkJetPrinter::timerHandler(void){
 #endif
             if(pulse_300ms){
                 sysPara->devOp->readCalandarDat();			//务必读一下此数据
+
             if(sysPara->status.RandomNum>0)
                 sysPara->devOp->Read_RanddomFromFpga();
 #ifdef COUNTER1_BY_GROUP /* 分段计米 */
@@ -1291,6 +1320,7 @@ void InkJetPrinter::timerHandler(void){
 //                warningHandler(3);
 //            }
 //            LogInfo::setRunStatusText(tr("处理警告:%1").arg(QDateTime::currentDateTime()));
+
             handleWarnInk(); // 处理墨水警告
             handleWarnSolvent(); // 处理溶剂警告
 #endif
@@ -1495,6 +1525,7 @@ void InkJetPrinter::getTestPrintWidgetButtonClickedSlot(int index)
         m_StackedWidget->setCurrentWidget(m_MainWidget);
          MySleep(200);
          m_MainWidget->onPreviewScene();
+         m_MainWidget->SendPrintDataToFpga(0);
         break;
     }
 
@@ -1852,6 +1883,13 @@ void InkJetPrinter::saveFPGACalandarAndDat(unsigned char *data){
     for(int i=0;i<len;i++){
         target[i]=data[7+i];
     }
+
+    QString hexStr = QString::number(sysPara->status.calandar_and_dat.cnt1CurrValue, 16);
+    bool ok;
+    sysPara->para.cnt1CurrValue = hexStr.toUInt(&ok, 10);
+
+    hexStr = QString::number(sysPara->status.calandar_and_dat.cnt2CurrValue, 16);
+    sysPara->para.cnt2CurrValue = hexStr.toUInt(&ok, 10);
 }
 
 void InkJetPrinter::saveFPGACnt3CurrValue(unsigned char *data){
@@ -2454,7 +2492,6 @@ void InkJetPrinter::autoControlHeater(){
  * 控制回收槽
  *
  * */
-
 void InkJetPrinter::detectAndcontrolReclaimTank(){
     sysPara->status.currReclaimTankPos =10*sysPara->status.curr_reclaimTankTime;
     sysPara->status.reclaimTankBlockedAppending =0;
@@ -2471,6 +2508,7 @@ void InkJetPrinter::detectAndcontrolReclaimTank(){
                 sysPara->devOp->controlReclaimTankOpen(false);
         }
 
+        m_MainWidget->stopFlashReclaimOpenBtn();
     }
     else  if(sysPara->status.reclaimTankstatus == 5 )//7 故障，6 关完成，5开完成，4 保持， 3 停止， 2 关， 1 开，0-无操作
     {
@@ -2480,7 +2518,10 @@ void InkJetPrinter::detectAndcontrolReclaimTank(){
         m_MainWidget->setRunStatus(tr("回收槽到头"));
         m_MainWidget->setReclaimStatus(true, 100);
         m_MainWidget->enablePrintButton(true);			//仅仅在此时能使能打印按钮  
-        sysPara->devOp->highVoltageCtrl(1);
+        // sysPara->devOp->highVoltageCtrl(1);
+
+        m_MainWidget->stopFlashReclaimOpenBtn();
+
 //        emit reclaimTankOpenDone();
         /*回收槽开关时间校正*/
         sysPara->para.reclaimTankTime =( sysPara->status.currReclaimTankPos>120 )? sysPara->status.currReclaimTankPos/10-1:12;
@@ -2494,13 +2535,21 @@ void InkJetPrinter::detectAndcontrolReclaimTank(){
     else  if(sysPara->status.reclaimTankstatus == 0x11 )//7 故障，6 关完成，5开完成，4 保持， 3 停止， 2 关， 1 开，0-无操作
     {
         sysPara->devOp->controlReclaimTankOpen(false);		//卡住，关闭
+        m_MainWidget->stopFlashReclaimOpenBtn();
 //        ui->tabMainWindow->setRunStatus(tr("回收槽卡住或者回收槽开关时间设置错误"));
     }
     else  if(sysPara->status.reclaimTankstatus == 1 || sysPara->status.reclaimTankstatus == 2)//7 故障，6 关完成，5开完成，4 保持， 3 停止， 2 关， 1 开，0-无操作
     {
         auto recliamTime = (sysPara->para.reclaimTankTime != 0 ? sysPara->para.reclaimTankTime : 15.0f) * 10.0f;
         int rate = qBound(0, 100, int((sysPara->status.currReclaimTankPos / recliamTime) * 100));
+
+        // 不知道为什么会有rate为0，且 sysPara->status.reclaimTankstatus == 2 ，也就是 关的状态。 回收槽位置在0处，而状态却是 关 ，很奇怪
+        if(sysPara->status.reclaimTankstatus != 2 && rate != 0) {
             m_MainWidget->setReclaimStatus(sysPara->status.reclaimTankstatus == 1, rate);
+        }
+
+        m_MainWidget->setReclaimOpenBtnStatus(sysPara->status.reclaimTankstatus == 2);
+        m_MainWidget->setReclaimCloseBtnStatus(sysPara->status.reclaimTankstatus == 1);
 
         sysPara->status.reclaimBlockedCnt = 0;
     }
@@ -2509,14 +2558,13 @@ void InkJetPrinter::detectAndcontrolReclaimTank(){
         if(sysPara->devOp->isReclaimTankCloseEnable())
             sysPara->devOp->controlReclaimTankClose(false);		//到头，关闭
         m_MainWidget->setReclaimStatus(false, 0);
+        m_MainWidget->stopFlashReclaimOpenBtn();
         //sysPara->status.currReclaimTankPos = 0;				//将回收槽的时间置为零
 //        emit reclaimTankCloseDone();
         sysPara->status.lastRecycleWarn = 0;
         sysPara->status.HVFaultCloseEn=0;
         sysPara->status.reclainCloseAppending=false;
         sysPara->status.canRunAirPushing = true; //下次开回收槽就执行排气程序
-
-        LogInfo::setRunStatusText("reclaimTankCloseDone currReclaimTankPos:"+QString::number(sysPara->status.currReclaimTankPos));
     }
     else  if(sysPara->status.reclaimTankstatus == 0x12 )//7 故障，6 关完成，5开完成，4 保持， 3 停止， 2 关， 1 开，0-无操作
     {
@@ -2524,6 +2572,12 @@ void InkJetPrinter::detectAndcontrolReclaimTank(){
         LogInfo::setRunStatusText(tr("回收槽卡住或者回收槽开关时间设置错误"));
         m_MainWidget->setRunStatus(tr("回收槽卡住或者回收槽开关时间设置错误"));
     }
+    else  if(sysPara->status.reclaimTankstatus == 4 ) 
+    {
+        m_MainWidget->setReclaimOpenBtnStatus(true);
+        m_MainWidget->setReclaimCloseBtnStatus(true);
+        LogInfo::setRunStatusText("Reclaim tank hold on "+QString::number(sysPara->status.currReclaimTankPos));
+    }
 }
 
 void InkJetPrinter::viscosity_timerHandler()
@@ -2562,7 +2616,7 @@ void InkJetPrinter::rebootApp()
                 sysPara->devOp->controlInkValve(false);
                 sysPara->devOp->controlInkValvePWM(false);
             }
-            m_MainWidget->setRunStatus(tr("正在准备重启,请等待%1秒...............").arg(i));
+            m_MainWidget->setRunStatus(tr("正在准备重启,请等待%1秒......").arg(i));
             MySleep(1000);
         }
     }
@@ -2595,7 +2649,7 @@ void InkJetPrinter::rebootApp()
         {
             if(i==9)
                 sysPara->devOp->controlReclaimTankOpen(false);
-            m_MainWidget->setRunStatus(tr("正在准备重启,请等待%1秒...............").arg(i));
+            m_MainWidget->setRunStatus(tr("正在准备重启,请等待%1秒......").arg(i));
             MySleep(1000);
         }
     }
@@ -2621,7 +2675,7 @@ void InkJetPrinter::rebootApp()
                 sysPara->para.gearPumpValue = 0;
                 sysPara->devOp->WriteMoterPump();
             }
-            m_MainWidget->setRunStatus(tr("正在准备重启,请等待%1秒...............").arg(i));
+            m_MainWidget->setRunStatus(tr("正在准备重启,请等待%1秒......").arg(i));
             MySleep(1000);
         }
     }
@@ -2719,11 +2773,12 @@ void InkJetPrinter::warningHandler(int type){
             if (!sysPara->RFIDPara.inkCardTimeOut)
                 inkTime = 48- dateTimeDiff/60/60;
         }
-        if(sysPara->RFIDPara.inkCardTimeOut){
+        if(sysPara->RFIDPara.inkCardTimeOut && flagOfWarning){
             if(++sysPara->status.showInkWarningNumber >= INTERVAL_AFTER48H){
                 warningShow(CARD_TYPE::INK,49);
                 sysPara->status.showInkWarningNumber = 0;//是否有必要保存?
                 sysPara->saveRFIDPara();
+                flagOfWarning = false;
                 return;
             }
         }
@@ -2736,18 +2791,21 @@ void InkJetPrinter::warningHandler(int type){
             if (dateTimeDiff > 60*60*24*2) {
                 sysPara->RFIDPara.solventCardTimeOut = true;
             }
+
             if (!sysPara->RFIDPara.solventCardTimeOut)
                 solventTime = 48- dateTimeDiff / 60 / 60;
         }
 
-        if(sysPara->RFIDPara.solventCardTimeOut){
+        if(sysPara->RFIDPara.solventCardTimeOut  && flagOfWarning){
             if(++sysPara->status.showSolventWarningNumber >= INTERVAL_AFTER48H){
                 warningShow(CARD_TYPE::SOLVENT,49);
                 sysPara->status.showSolventWarningNumber = 0;
                 sysPara->saveRFIDPara();
+                flagOfWarning = false;
                 return;
             }
         }
+
         sysPara->saveRFIDPara();
     }
     /***********处理保养到期提示start******************/
@@ -2856,6 +2914,7 @@ int InkJetPrinter::updateWarningTime(int type){
                 // 读取文件内容
                 QTextStream in(&file);
                 QString starTime = in.readAll(); // 第一次提示的时间
+                starTime = starTime.trimmed();
                 // 关闭文件
                 file.close();
                 inkWarnTime = QDateTime::fromString(starTime,"yyyy-MM-dd HH::mm::ss");
@@ -2873,6 +2932,7 @@ int InkJetPrinter::updateWarningTime(int type){
                 // 读取文件内容
                 QTextStream in(&file);
                 QString starTime = in.readAll(); // 第一次提示的时间
+                starTime = starTime.trimmed();
                 // 关闭文件
                 file.close();
                 solventWarnTime = QDateTime::fromString(starTime,"yyyy-MM-dd HH::mm::ss");
@@ -2968,7 +3028,6 @@ void InkJetPrinter::handleWarnInk()
 
         if(sysPara->status.inkWarningCnt >= DETECT_WARNING_TIME){
             sysPara->para.flagOfInkWarning = true;
-            sysPara->RFIDPara.needInkCard = true;
             manager_rfid->setInkCardFirstPrompt(true);
             QString strCurDateTime = QDateTime::currentDateTime().toString("yyMMddhhmmss");
             LogInfo::setRunStatusText("Ink warning.");
@@ -3007,7 +3066,7 @@ void InkJetPrinter::handleWarnInk()
             QDateTime curDateTime = QDateTime::currentDateTime();
             QByteArray curDateTimestr = curDateTime.toString("yyyy-MM-dd HH::mm::ss").toUtf8();
             QFile file("/home/plg/inkRFIDTime.txt");
-            if(!file.open(QIODevice::WriteOnly)){
+            if(!file.open(QIODevice::WriteOnly | QIODevice::Truncate)){
                 qDebug()<<"Open inkRFIDTime Failure.";
                 LogInfo::setRunStatusText("Open inkRFIDTime Failure.");
             }
@@ -3046,7 +3105,6 @@ void InkJetPrinter::handleWarnSolvent()
 
         if(sysPara->status.solventWarningCnt >= DETECT_WARNING_TIME){
             sysPara->para.flagOfSolventWarning = true;
-            sysPara->RFIDPara.needSolventCard = true;
             manager_rfid->setSolventCardFirstPrompt(true);
             QDateTime curDateTime = QDateTime::currentDateTime();
             QString strCurDateTime = curDateTime.toString("yyMMddhhmmss");
@@ -3084,7 +3142,7 @@ void InkJetPrinter::handleWarnSolvent()
             QDateTime curDateTime = QDateTime::currentDateTime();
             QByteArray curDateTimestr = curDateTime.toString("yyyy-MM-dd HH::mm::ss").toUtf8();
             QFile file("/home/plg/solventRFIDTime.txt");
-            if(!file.open(QIODevice::WriteOnly)){
+            if(!file.open(QIODevice::WriteOnly | QIODevice::Truncate)){
                 qDebug()<<"Open solventRFIDTime Failure.";
                 LogInfo::setRunStatusText("Open solventRFIDTime Failure.");
             }
@@ -3113,8 +3171,24 @@ void InkJetPrinter::handleWarnSolvent()
 
 void InkJetPrinter::slt_showMsg(QString msg)
 {
+    static QList<QMessageBox*> msgPool;
+
     QMessageBox * msgBox = new QMessageBox(QMessageBox::NoIcon, tr("提示"), msg, QMessageBox::StandardButton::Ok);
-    connect(msgBox, &QMessageBox::finished, msgBox, &QMessageBox::deleteLater);
+    msgPool.push_back(msgBox);
+    connect(msgBox, &QMessageBox::finished, [this, msgBox, &msgPool](){
+        auto idx = msgPool.lastIndexOf(msgBox);
+        if(idx != -1) {
+            msgPool.removeAt(idx);
+        }
+
+        msgBox->deleteLater();
+    });
+
     msgBox->show();
+
+    if(msgPool.size() > 3) {
+        msgPool.takeFirst()->deleteLater();
+    }
+
     LogInfo::setRunStatusText(msg);
 }

MainInstruction.cpp

@@ -4,6 +4,7 @@
 #include <QDebug>
 #include "DlgRFIDConfig.h"
 #include "runtimectrl.h"
+#include "DlgCanvasHeightEditor.h"
 
 MainInstruction::MainInstruction(QWidget *parent) :
     QWidget(parent),
@@ -26,6 +27,7 @@ MainInstruction::MainInstruction(QWidget *parent) :
     dlgInputAddr = new DlgInputAddr(parent);
     dialogAuthorization = new DialogAuthorization(parent);
     dlgRfidConfig = new DlgRFIDConfig(this);
+    dlgRfidConfig->setWindowTitle(tr("RFID Settings"));
 
     connect(dlgRfidConfig, &DlgRFIDConfig::accepted, this, &MainInstruction::onRFIDAutoConfirmTimeoutChanged);
 
@@ -57,6 +59,17 @@ MainInstruction::MainInstruction(QWidget *parent) :
     connect(&timeDia,SIGNAL(accepted()),this,SLOT(slt_timeSetting()));
 
     ui->btn_network->hide();
+
+    dlgCanvasHeightEditor = new DlgCanvasHeightEditor(this);
+    dlgCanvasHeightEditor->setWindowModality(Qt::WindowModality::WindowModal);
+    connect(dlgCanvasHeightEditor, &QDialog::accepted, this, [this](){
+        if(!sysPara)
+            return;
+
+        sysPara->para.canvasHeight = dlgCanvasHeightEditor->canvasHeight();
+        LogInfo::setRunStatusText(QString("Canvas Height: %1").arg(sysPara->para.canvasHeight));
+        sysPara->saveParaToFile();
+    });
 }
 
 MainInstruction::~MainInstruction()
@@ -251,7 +264,7 @@ void MainInstruction::slt_timeSetting()
 void MainInstruction::onRfidCfgBtnClicked()
 {
     dlgRfidConfig->setAutoConfirmTimeout(sysPara->para.rfidCountDown);
-    dlgRfidConfig->setWindowModality(Qt::WindowModal);
+    dlgRfidConfig->setWindowModality(Qt::WindowModality::WindowModal);
     dlgRfidConfig->show();
 }
 
@@ -262,6 +275,14 @@ void MainInstruction::onRFIDAutoConfirmTimeoutChanged()
     sysPara->saveRFIDPara();
 }
 
+void MainInstruction::onCanvasCfgBtnClicked()
+{
+    if(sysPara)
+        dlgCanvasHeightEditor->setCanvsHeight(sysPara->para.canvasHeight);
+        
+    dlgCanvasHeightEditor->show();
+}
+
 void MainInstruction::applyStyleSheet()
 {
     QString styleSheet =

MainInstruction.h

@@ -13,6 +13,7 @@
 #include "TimeSettingDialog.h"
 
 class DlgRFIDConfig;
+class DlgCanvasHeightEditor;
 
 namespace Ui {
 class MainInstruction;
@@ -55,6 +56,8 @@ private slots:
 
     void onRFIDAutoConfirmTimeoutChanged();
 
+    void onCanvasCfgBtnClicked();
+
 private:
     Ui::MainInstruction *ui;
     SysPara* sysPara = nullptr;
@@ -65,6 +68,7 @@ private:
     DialogMaintenanceTimeSetting *MTimeSetting;
     DialogAuthorization *dialogAuthorization;
     DlgRFIDConfig *dlgRfidConfig = nullptr;
+    DlgCanvasHeightEditor* dlgCanvasHeightEditor = nullptr;
 
     // 时间设置
     TimeSettingDialog timeDia;

MainInstruction.ui

@@ -98,7 +98,7 @@
     </rect>
    </property>
    <property name="currentIndex">
-    <number>1</number>
+    <number>2</number>
    </property>
    <widget class="QWidget" name="tabBasic">
     <attribute name="title">
@@ -291,13 +291,26 @@
       <string>其他设置</string>
      </property>
     </widget>
+    <widget class="QPushButton" name="canvaSizeCfgBtn">
+     <property name="geometry">
+      <rect>
+       <x>310</x>
+       <y>70</y>
+       <width>254</width>
+       <height>92</height>
+      </rect>
+     </property>
+     <property name="text">
+      <string>窗口点阵设置</string>
+     </property>
+    </widget>
    </widget>
   </widget>
   <widget class="QPushButton" name="closeBtn">
    <property name="geometry">
     <rect>
-     <x>660</x>
+     <x>670</x>
-     <y>470</y>
+     <y>500</y>
      <width>100</width>
      <height>40</height>
     </rect>
@@ -328,8 +341,8 @@
    <slot>onGraphicsEditBtnClicked()</slot>
    <hints>
     <hint type="sourcelabel">
-     <x>230</x>
+     <x>232</x>
-     <y>196</y>
+     <y>195</y>
     </hint>
     <hint type="destinationlabel">
      <x>-154</x>
@@ -344,8 +357,8 @@
    <slot>onRfidCfgBtnClicked()</slot>
    <hints>
     <hint type="sourcelabel">
-     <x>137</x>
+     <x>139</x>
-     <y>94</y>
+     <y>115</y>
     </hint>
     <hint type="destinationlabel">
      <x>-182</x>
@@ -353,9 +366,26 @@
     </hint>
    </hints>
   </connection>
+  <connection>
+   <sender>canvaSizeCfgBtn</sender>
+   <signal>clicked()</signal>
+   <receiver>MainInstruction</receiver>
+   <slot>onCanvasCfgBtnClicked()</slot>
+   <hints>
+    <hint type="sourcelabel">
+     <x>491</x>
+     <y>139</y>
+    </hint>
+    <hint type="destinationlabel">
+     <x>956</x>
+     <y>250</y>
+    </hint>
+   </hints>
+  </connection>
  </connections>
  <slots>
   <slot>onGraphicsEditBtnClicked()</slot>
   <slot>onRfidCfgBtnClicked()</slot>
+  <slot>onCanvasCfgBtnClicked()</slot>
  </slots>
 </ui>

MainWidget.ui

@@ -217,7 +217,7 @@ QScrollBar::add-line:horizontal { bottom: 0px; }</string>
            <x>0</x>
            <y>0</y>
            <width>780</width>
-           <height>169</height>
+           <height>177</height>
           </rect>
          </property>
         </widget>
@@ -289,7 +289,7 @@ QScrollBar::add-line:horizontal { bottom: 0px; }</string>
               <property name="minimumSize">
                <size>
                 <width>200</width>
-                <height>0</height>
+                <height>130</height>
                </size>
               </property>
               <property name="maximumSize">
@@ -473,7 +473,7 @@ QScrollBar::add-line:horizontal { bottom: 0px; }</string>
               <property name="minimumSize">
                <size>
                 <width>200</width>
-                <height>150</height>
+                <height>140</height>
                </size>
               </property>
               <property name="maximumSize">
@@ -591,13 +591,13 @@ QScrollBar::add-line:horizontal { bottom: 0px; }</string>
              <widget class="QFrame" name="fra_state">
               <property name="minimumSize">
                <size>
-                <width>200</width>
+                <width>214</width>
                 <height>0</height>
                </size>
               </property>
               <property name="maximumSize">
                <size>
-                <width>200</width>
+                <width>214</width>
                 <height>140</height>
                </size>
               </property>
@@ -629,6 +629,18 @@ QScrollBar::add-line:horizontal { bottom: 0px; }</string>
             </item>
             <item row="1" column="0">
              <widget class="QLabel" name="lb_nozzleState">
+              <property name="minimumSize">
+               <size>
+                <width>214</width>
+                <height>30</height>
+               </size>
+              </property>
+              <property name="maximumSize">
+               <size>
+                <width>214</width>
+                <height>16777215</height>
+               </size>
+              </property>
               <property name="text">
                <string/>
               </property>
@@ -642,6 +654,12 @@ QScrollBar::add-line:horizontal { bottom: 0px; }</string>
          </item>
          <item alignment="Qt::AlignRight">
           <widget class="QWidget" name="rightPanel" native="true">
+           <property name="minimumSize">
+            <size>
+             <width>156</width>
+             <height>0</height>
+            </size>
+           </property>
            <layout class="QVBoxLayout" name="verticalLayout_2" stretch="0">
             <property name="spacing">
              <number>5</number>
@@ -649,6 +667,9 @@ QScrollBar::add-line:horizontal { bottom: 0px; }</string>
             <property name="leftMargin">
              <number>1</number>
             </property>
+            <property name="bottomMargin">
+             <number>0</number>
+            </property>
             <item>
              <layout class="QVBoxLayout" name="verticalLayout_5">
               <item>
@@ -657,11 +678,14 @@ QScrollBar::add-line:horizontal { bottom: 0px; }</string>
                  <number>0</number>
                 </property>
                 <item>
-                 <widget class="QPushButton" name="m_RightBtn">
+                 <widget class="QToolButton" name="m_RightBtn">
+                  <property name="enabled">
+                   <bool>true</bool>
+                  </property>
                   <property name="minimumSize">
                    <size>
-                    <width>150</width>
+                    <width>0</width>
-                    <height>95</height>
+                    <height>0</height>
                    </size>
                   </property>
                   <property name="maximumSize">
@@ -671,10 +695,40 @@ QScrollBar::add-line:horizontal { bottom: 0px; }</string>
                    </size>
                   </property>
                   <property name="styleSheet">
-                   <string notr="true"/>
+                   <string notr="true">QToolButton {
+            padding: 4px 16px;
+            border-radius: 6px;
+            font-size: 14px;
+            font-weight: 500;
+            color: #333333;  /* 深灰文字，与蓝色图标协调 */
+
+            /* 中性色背景，略带渐变制造立体感 */
+            background-color: qlineargradient(x1: 0, y1: 0, x2: 0, y2: 1,
+                                            stop: 0 #eefaff,
+                                            stop: 1 #ceefff);
+            border: 1px solid #a1a1a1;
+        }
+
+        QToolButton:hover {
+            background-color: qlineargradient(x1: 0, y1: 0, x2: 0, y2: 1,
+                                            stop: 0 #F5F7FA,
+                                            stop: 1 #E8EBF0);
+            border-color: #B0B6BE;
+        }
+
+        QToolButton:pressed {
+            background-color: #D5D8DD;
+            border-color: #A8AEB6;
+        }
+
+        QToolButton:disabled {
+            color: #A0A5AB;
+            background-color: #BCBFC4;
+            border: 1px solid #BCBFC4;
+        }</string>
                   </property>
                   <property name="text">
-                   <string/>
+                   <string>喷嘴开启</string>
                   </property>
                   <property name="icon">
                    <iconset resource="image.qrc">
@@ -686,11 +740,8 @@ QScrollBar::add-line:horizontal { bottom: 0px; }</string>
                     <height>70</height>
                    </size>
                   </property>
-                  <property name="fixedSize" stdset="0">
+                  <property name="toolButtonStyle">
-                   <size>
+                   <enum>Qt::ToolButtonIconOnly</enum>
-                    <width>70</width>
-                    <height>70</height>
-                   </size>
                   </property>
                  </widget>
                 </item>
@@ -736,25 +787,64 @@ QScrollBar::add-line:horizontal { bottom: 0px; }</string>
                 <property name="spacing">
                  <number>0</number>
                 </property>
-                <item>
+                <item alignment="Qt::AlignBottom">
-                 <widget class="QPushButton" name="m_LeftBtn">
+                 <widget class="QToolButton" name="m_LeftBtn">
+                  <property name="enabled">
+                   <bool>true</bool>
+                  </property>
+                  <property name="sizePolicy">
+                   <sizepolicy hsizetype="Fixed" vsizetype="Fixed">
+                    <horstretch>0</horstretch>
+                    <verstretch>0</verstretch>
+                   </sizepolicy>
+                  </property>
                   <property name="minimumSize">
                    <size>
-                    <width>150</width>
+                    <width>0</width>
-                    <height>95</height>
+                    <height>0</height>
                    </size>
                   </property>
                   <property name="maximumSize">
                    <size>
                     <width>150</width>
-                    <height>100</height>
+                    <height>95</height>
                    </size>
                   </property>
                   <property name="styleSheet">
-                   <string notr="true"/>
+                   <string notr="true">QToolButton {
+            padding: 4px 16px;
+            border-radius: 6px;
+            font-size: 14px;
+            font-weight: 500;
+            color: #333333;  /* 深灰文字，与蓝色图标协调 */
+
+            /* 中性色背景，略带渐变制造立体感 */
+            background-color: qlineargradient(x1: 0, y1: 0, x2: 0, y2: 1,
+                                            stop: 0 #eefaff,
+                                            stop: 1 #ceefff);
+            border: 1px solid #a1a1a1;
+        }
+
+        QToolButton:hover {
+            background-color: qlineargradient(x1: 0, y1: 0, x2: 0, y2: 1,
+                                            stop: 0 #F5F7FA,
+                                            stop: 1 #E8EBF0);
+            border-color: #B0B6BE;
+        }
+
+        QToolButton:pressed {
+            background-color: #D5D8DD;
+            border-color: #A8AEB6;
+        }
+
+        QToolButton:disabled {
+            color: #A0A5AB;
+            background-color: #BCBFC4;
+            border: 1px solid #BCBFC4;
+        }</string>
                   </property>
                   <property name="text">
-                   <string/>
+                   <string>喷嘴关闭</string>
                   </property>
                   <property name="icon">
                    <iconset resource="image.qrc">
@@ -766,15 +856,12 @@ QScrollBar::add-line:horizontal { bottom: 0px; }</string>
                     <height>70</height>
                    </size>
                   </property>
-                  <property name="fixedSize" stdset="0">
+                  <property name="toolButtonStyle">
-                   <size>
+                   <enum>Qt::ToolButtonIconOnly</enum>
-                    <width>70</width>
-                    <height>70</height>
-                   </size>
                   </property>
                  </widget>
                 </item>
-                <item>
+                <item alignment="Qt::AlignBottom">
                  <widget class="QLabel" name="lb_LeftBtn">
                   <property name="minimumSize">
                    <size>

MyInputMethod.cpp

@@ -157,7 +157,7 @@ void MyInputMethod::updateHandler ( int type ){
 			break;
     case 2://QWSInputMethod::FocusOut:
 			inputMethod->hide();
-            digitalInput->hide();
+            // digitalInput->hide();
             inputMethod->onHiden();            
 			break;
 	}

Printsetting.cpp

@@ -223,7 +223,13 @@ void PrintSetting::TriggerupdateModelToUI()
 #endif
     ui->spinBoxEleEyeTriggerIntervalMs->setValue(m_model.triggerInterval);
     ui->spinBoxOutputPulseDelayMs->setValue(m_model.outputPulseDelayMs);
+
+    if(m_model.eleEyeRepeatCnt > INT32_MAX){
+        ui->cb_unlimited->setChecked(true);
+    }
+    else {
         ui->spinBoxEleEyeTriggerRepeatCnt->setValue(m_model.eleEyeRepeatCnt);
+    }
 
     ui->spinBoxSynTriggerPrintLen->setText(QString::number(m_model.triggerInterval));
     ui->lineEditTriggerPulsePerMm->setText(QString::number((double)m_model.encoderPulsePerMm));
@@ -586,10 +592,10 @@ void PrintSetting::setEnableEleEyeSetting(bool flag){
     ui->labelEleEyeTriggerIntervalMs->setEnabled(!(ui->radioButtonSynTriggerExternal->isChecked() && ui->eleEyeEdgetTriggerInner->isChecked()));
     // ui->spinBoxEleEyeTriggerIntervalMs->setEnabled(!(ui->radioButtonSynTriggerExternal->isChecked() && ui->eleEyeEdgetTriggerInner->isChecked()));
     ui->spinBoxEleMaskTime->setEnabled(flag);
-    ui->spinBoxEleEyeTriggerRepeatCnt->setEnabled(flag);
+    ui->spinBoxEleEyeTriggerRepeatCnt->setEnabled(true);
     ui->radioButtonEleEyeEdgetTrigger->setEnabled(flag);
     ui->radioButtonEleEyeLevelTrigger->setEnabled(flag);
-    ui->cb_unlimited->setEnabled(flag);
+    ui->cb_unlimited->setEnabled(true);
     ui->spinBoxEleEyeTriggerPrintDelay->setEnabled(flag);
     if (!flag) ui->cb_unlimited->setChecked(false);
 }
@@ -629,7 +635,7 @@ void PrintSetting::applyPrintSettingsToSysPara(bool showTip)
     PrintSettingModel::applyToSysPara(m_model, sysPara);
 
     if (sysPara->devOp) {
-        sysPara->devOp->writeFpgaPrintPara(false);
+        int res = sysPara->devOp->writeFpgaPrintPara(!showTip);
 
         sysPara->devOp->writeSyncAndDelayPrintCount(
             m_model.triggerMode == PRINT_TRIGGER_SYNCHRONIZER || m_model.triggerMode == PRINT_TRIGGER_TIME, 
@@ -640,7 +646,7 @@ void PrintSetting::applyPrintSettingsToSysPara(bool showTip)
         sysPara->devOp->writeFlightCompCtrl(ui->enbFlightCompCtrl->isChecked(), 
             ui->enbAccelDecelPredict->isChecked(), quint32(ui->flightCompWindowCycles->value()));
 
-        if(sysPara->devOp->writeFpgaPrintPara(true) != -1 && showTip) {
+        if(res != -1 && showTip) {
             QMessageBox box(QMessageBox::Icon::Information, tr("提示"), tr("应用成功"), QMessageBox::Ok, nullptr);
             auto btn = box.button(QMessageBox::Ok);
             // btn->setFixedSize(80, 40);
@@ -900,7 +906,6 @@ QString PrintSettingModel::toString(const PrintSettingModel &model)
     return str;
 }
 
-
 PrintSettingModel PrintSettingModel::defPrintSettingModel()
 {
     QFile file(DEF_PRINT_SETTINGS_PATH);

Printsetting.h

@@ -130,7 +130,6 @@ public:
     void setModel(const PrintSettingModel& model);
 
     void setDefaultSettingMode(bool enable);
-
 private slots:
     void buttonClickedSlot();
 

Printsetting.ui

@@ -381,7 +381,7 @@
          </size>
         </property>
         <property name="minimum">
-         <number>1</number>
+         <number>0</number>
         </property>
         <property name="maximum">
          <number>65535</number>
@@ -428,10 +428,10 @@
          </size>
         </property>
         <property name="minimum">
-         <number>1</number>
+         <number>0</number>
         </property>
         <property name="maximum">
-         <number>253</number>
+         <number>2147483647</number>
         </property>
        </widget>
       </item>
@@ -1502,5 +1502,21 @@
     </hint>
    </hints>
   </connection>
+  <connection>
+   <sender>cb_unlimited</sender>
+   <signal>toggled(bool)</signal>
+   <receiver>spinBoxEleEyeTriggerRepeatCnt</receiver>
+   <slot>setDisabled(bool)</slot>
+   <hints>
+    <hint type="sourcelabel">
+     <x>634</x>
+     <y>191</y>
+    </hint>
+    <hint type="destinationlabel">
+     <x>451</x>
+     <y>191</y>
+    </hint>
+   </hints>
+  </connection>
  </connections>
 </ui>

QtUI.pro

@@ -180,7 +180,8 @@ HEADERS +=  Public.h \
     Log/logglobal.h \
     loginfoctrl.h \
     runtimectrl.h \
-    dump.h
+    dump.h \
+    DlgCanvasHeightEditor.h
 
 
 FORMS += \
@@ -229,7 +230,8 @@ FORMS += \
     scene/CounterEditor.ui \
     scene/DlgBarcodeFormat.ui \
     scene/DlgQrcodeFormat.ui \
-    dlgQrCode.ui
+    dlgQrCode.ui \
+    DlgCanvasHeightEditor.ui
 
 SOURCES +=\
     mainwidget.cpp \
@@ -339,7 +341,8 @@ SOURCES +=\
     Log/logger.cpp \
     Log/logmessage.cpp \
     loginfoctrl.cpp \
-    runtimectrl.cpp
+    runtimectrl.cpp \
+    DlgCanvasHeightEditor.cpp
 
 
 

SysPara.cpp

@@ -106,6 +106,10 @@ void SysPara::loadParaFromFile(){
                 file.seek(0);
 				file.read((char *)&para,(long long int)sizeof(para));
 				file.close();
+
+                // 韩国要求 画布大小可以设定在24 到 32 之间
+                para.canvasHeight = qBound(unsigned(SCENE_MIN_HEIGHT), para.canvasHeight, unsigned(SCENE_MAX_HEIGHT));
+
                 if(para.gearPumpSpeedAlarm < 1000 || para.gearPumpSpeedAlarm > 2000)
                     para.gearPumpSpeedAlarm = 1500;
 
@@ -181,6 +185,8 @@ void SysPara::loadDefaultPara(){
 
         para.mixValveisNewVersion = 1;//混和阀是否是新管路
         para.gearPumpSpeedAlarm = 1500;
+
+        para.canvasHeight = 32;
 }
 
 void SysPara::saveParaToFile(){
@@ -1029,6 +1035,7 @@ void SysPara::saveRFIDPara()
     out << RFIDPara.cardInk;
     out << RFIDPara.cardSolvent;
     out << para.rfidCountDown;
+    out << status.showInkWarningNumber << status.showSolventWarningNumber;
 
     if(!file.flush()){
         LogInfo::setRunStatusText("RFID Para save Failed 1");
@@ -1076,6 +1083,7 @@ bool SysPara::loadRFIDPara()
        in >> RFIDPara.cardInk;
        in >> RFIDPara.cardSolvent;
        in >> para.rfidCountDown;
+       in >> status.showInkWarningNumber >> status.showSolventWarningNumber;
 
        file.close();
        return true;

SysPara.h

@@ -80,6 +80,9 @@ typedef enum {
 #define MAX_QVARI_NUM			4
 #define MAX_CNT1_GROUPS_NUM     50
 
+#define SCENE_MAX_HEIGHT 32
+#define SCENE_MIN_HEIGHT 24
+
 typedef struct {
     unsigned int second:6;
     unsigned int minute:6;
@@ -804,6 +807,7 @@ typedef struct {
     bool flagOfInkWarning;  //报错累计次数达标，报警标志设为true
     bool flagOfSolventWarning;  //报错累计次数达标，报警标志设为true
     unsigned short rfidCountDown;
+    unsigned int canvasHeight;  // 韩国需求中，要求可以设定打印区域的高度，默认为32。
     /*  */
     // 1108Bytes
 }sysPara_t;

SystemManage.cpp

@@ -1348,10 +1348,13 @@ void SystemManage::programFPGAProcess(){
         emit sigToCloseSerialFPGA();
         emit sigToCloseSerialSTM32();
         //关闭定时器
-        programFPGATimer->stop();
+//        programFPGATimer->stop();
         programFPGADialog->init();
         programFPGADialog->show();
     }
+
+    programFPGATimer->stop();
+
 }
 
 void SystemManage::PowerOnSetTime(QString date){

SystemSetting.cpp

@@ -18,8 +18,8 @@ int convertFreq(int index){
 //    qDebug()<<"index="<<index;
     switch(index){
             case 0:return 64000;break;		//64k,pwm波，占空比50%
-            case 1:return 76000;break;		//76k
+  //          case 1:return 76000;break;		//76k
-//            case 2:return 83000;break;		//83k
+            case 1:return 83000;break;		//83k
             case 2:return 96000;break;		//96k
             case 3:return 128000;break;		//128k
             case 4:return 145000;break;		//145k

VerBVersion.h

@@ -6,8 +6,8 @@
 */
 #define UP_PRINTER_MAJOR_VER  6
 #define UP_PRINTER_MINOR_VER  7
-#define UP_PRINTER_RIVISION_VER  2
+#define UP_PRINTER_RIVISION_VER  3
-#define SUB_VERSION "_KOR-T"
+#define SUB_VERSION "_KOR"
 #ifdef __RFID_OLD
 #define SUB_RFID "_RO"
 #else

countervarset.ui

@@ -35,7 +35,7 @@
     <enum>Qt::StrongFocus</enum>
    </property>
    <property name="currentIndex">
-    <number>0</number>
+    <number>1</number>
    </property>
    <widget class="QWidget" name="tab">
     <attribute name="title">
@@ -1509,5 +1509,21 @@ height: 25px;
     </hint>
    </hints>
   </connection>
+  <connection>
+   <sender>checkBoxResetCnt1CurrValue</sender>
+   <signal>toggled(bool)</signal>
+   <receiver>spinBoxCnt1CurrValue</receiver>
+   <slot>setDisabled(bool)</slot>
+   <hints>
+    <hint type="sourcelabel">
+     <x>335</x>
+     <y>198</y>
+    </hint>
+    <hint type="destinationlabel">
+     <x>453</x>
+     <y>198</y>
+    </hint>
+   </hints>
+  </connection>
  </connections>
 </ui>

fileManage/FileManageWidget.cpp

@@ -271,6 +271,12 @@ void FileManageWidget::copyFiles(QListWidget *from, QListWidget *to)
     for(auto item : items) {
         auto srcPath = item->data(AbsPathRole).toString();
         auto destFilePath = destPath + QFileInfo(srcPath).fileName();
+
+        QFileInfo destFile(destFilePath);
+        if(destFile.exists()) {
+            QFile::remove(destFilePath);
+        }
+
         bool ret = QFile::copy(srcPath, destFilePath);
         qInfo() << "Copy: " << srcPath << " -> " << destFilePath << ", result: " << ret;
     }

mainwidget.h

@@ -15,6 +15,7 @@
 #include <QHBoxLayout>
 #include <QLabel>
 #include <QPushButton>
+#include <QToolButton>
 #include <QTextEdit>
 #include <QTime>
 #include <QMessageBox>
@@ -40,7 +41,6 @@ public:
 
     void bindTxTEdit(QTextEdit* textEdit);
     void bindPicScene(PicScene* pPicScene);
-    void PreviewPressed();
     void onPreviewScene();
     // 260420 hlp:场景为空时，渲染空场景并刷新界面
     void handleEmptySize();
@@ -52,18 +52,14 @@ public:
 
     bool pushButtonFlag;
     
-    int searchQrVar();
-    int searchExpiryVar();//检索有效期变量
-    void ExpiryDotUpdate(char Mode);
-    
     // 单独更新时间类图元 byons@2026年4月11日
 
     /**
      * @brief 更新时间类图元到FPGA print 数据
-     * @return true 有时间元素更新，false 无时间元素更新
+     * @return 返回需要更新的区域
      * @remark 判断返回值用于决定是否SendPrintDataToFpga
      */
-    bool dateTimeItemsDotUpdate();
+    QRect variableItemsUpdate();
 
     /**
      * @brief 向FPGA print 数据缓冲区写入image
@@ -85,6 +81,10 @@ public:
     // 回收槽关闭按钮状态设置
     void setReclaimCloseBtnStatus(bool enable);
 
+    void flashReclaimOpenBtn();
+
+    void stopFlashReclaimOpenBtn();
+
     /**
      * @brief 设置回收槽开关状态
      * @param isOpen true：开；false：关
@@ -108,7 +108,7 @@ public:
 
     QTimer *timerShowItem,*timerPowerOff;
 
-    void SendPrintDataToFpga(unsigned char alterMode, bool isUpdate = false);
+    void SendPrintDataToFpga(unsigned char alterMode, int startCols = -1, int size = -1);
 
     void updatePrintDisplayLabel();
 
@@ -137,8 +137,8 @@ private:
     QPushButton* m_StopBtn;
     QPushButton* m_StartBtn;
     QPushButton* m_ToolBtn;
-    QPushButton* m_RightBtn;
+    QToolButton* m_RightBtn;
-    QPushButton* m_LeftBtn;
+    QToolButton* m_LeftBtn;
     PrintTextDisplay* m_PrintDisplay;
 
 
@@ -183,12 +183,15 @@ private:
 
     void initSheet();
 
+    bool m_reclaimFlashState = false;
+    
+    QTimer* m_reclaimOpenBtnFlashTimer = nullptr;
+
     // 高亮切换
     void changeHighLight(bool isStart);
 private slots:
     void airPushingProcess();
     void buttonClickedSlot();
-    void ontextEdittextChanged();
 
     void on_m_RightBtn_clicked();
 
@@ -200,6 +203,8 @@ private slots:
 
     void slt_clearCnt();
 
+    void onReclaimOpenBtnFlashTimerTimeout();
+
 signals:
     void sendButtonClickedSignal(int index);
     void setDisableAll();

myinclude.h

@@ -12,6 +12,7 @@
 #define MYSAVEFILEDLG  // 定义自己的保存文件对话框，解决系统对话框按键不弹起问题
 #define     LANINTERFACE_NAME "eth0"
 
+// #define FPGA_TEST
 //#define __RFID_OLD        //旧的加密算法
 #define __RFID_CARD       //刷卡功能
 //#define __RFID_IND        //允许印度进行二次加密的宏
@@ -28,7 +29,7 @@
 
 enum CRYS_FREQ{
     CRYS_64K,
-    CRYS_76K,
+    CRYS_83K,
     CRYS_96K,
     CRYS_128K
 };

rfid/rfidmanager.cpp

@@ -65,7 +65,7 @@ void RFIDManager::MySleep(unsigned int msec, int expSize)
 //            recResponse = comForRFID->read(8);
             break;
         }
-        QCoreApplication::processEvents(QEventLoop::AllEvents, 10);
+        QCoreApplication::processEvents(QEventLoop::AllEvents, 100);
     }
 }
 
@@ -1144,6 +1144,10 @@ bool RFIDManager::waitStatus()
             sysPara->para.inkWarnTime = 0;
             sysPara->para.flagOfInkWarning = false;
             sysPara->saveParaToFile();
+
+            QDir dir("/home/plg");
+            dir.remove("inkRFIDTime.txt");
+
             res = true;
         }
     } else if (status.addedSolvent && status.cardSolvent) {
@@ -1157,6 +1161,9 @@ bool RFIDManager::waitStatus()
             sysPara->para.solventWarnDate = 0;
             sysPara->para.solventWarnTime = 0;
             sysPara->saveParaToFile();
+
+            QDir dir("/home/plg");
+            dir.remove("solventRFIDTime.txt");
         }
         res = true;
     }
@@ -1242,10 +1249,6 @@ void RFIDManager::slt_intervalTimerHandle()
         status.firstPromptSolventCard = false;
     }
     
-            // if(!sysPara->RFIDPara.cardInk) {
-            //     QMessageBox::information(nullptr, tr("提示"), tr("请及时刷溶剂卡."));
-            // }
-    
     //不需要通知先后，成功即可
     if (waitStatus()) {
         LogInfo::setRunStatusText(tr("sucess"));

scene/BarcodeEditor.cpp

@@ -59,6 +59,11 @@ BarcodeEditor::BarcodeEditor(QWidget *parent) :
 
     connect(&m_barcodeFormatEditor, &DlgBarcodeFormat::accepted, this, &BarcodeEditor::onBarcodeFormatConfirmed);
     connect(&m_qrcodeFormatEditor, &DlgQrcodeFormat::accepted, this, &BarcodeEditor::onQrcodeFormatConfirmed);
+
+    m_barcodeFormatEditor.setWindowModality(Qt::WindowModality::WindowModal);
+    m_qrcodeFormatEditor.setWindowModality(Qt::WindowModality::WindowModal);
+    m_barcodeFormatEditor.setWindowTitle(tr("BarCode Format"));
+    m_qrcodeFormatEditor.setWindowTitle(tr("Qrcode Format"));
 }
 
 BarcodeEditor::~BarcodeEditor()

scene/ItemCommon.cpp

@@ -55,8 +55,8 @@ static QImage renderDataMatrix(const unsigned char *grid, int cols, int rows, in
         return QImage();
     }
 
-    int width = cols * moduleSize;
+    int width = rows * moduleSize;
-    int height = rows * moduleSize;
+    int height = cols * moduleSize;
     QImage image(width, height, QImage::Format_ARGB32);
     image.fill(background);
 
@@ -64,8 +64,8 @@ static QImage renderDataMatrix(const unsigned char *grid, int cols, int rows, in
         for (int x = 0; x < cols; ++x) {
             bool bit = (grid[y * cols + x] & 0x01) != 0;
             QRgb color = bit ? foreground : background;
-            int px = x * moduleSize;
+            int px = y * moduleSize;
-            int py = y * moduleSize;
+            int py = (cols - 1 - x) * moduleSize;
             for (int dy = 0; dy < moduleSize; ++dy) {
                 for (int dx = 0; dx < moduleSize; ++dx) {
                     image.setPixel(px + dx, py + dy, color);
@@ -573,6 +573,8 @@ QImage ItemUtils::txtToImage(const QString &txt, const QFont &font, const QColor
     painter.drawText(img.rect(), txt);
     painter.end();
 
+    return img;
+    
     // 按背景色裁剪，使输出图像紧贴文字像素的最小包围盒（详见函数注释）
     return clipTxtImage(img, bgRgb);
 }

scene/pictextitem.cpp

@@ -5,6 +5,7 @@
 #include <QPainter>
 //#include "moveinput.h"
 #include <QStyleOptionGraphicsItem>
+#include "ItemCommon.h"
 
 //extern MoveInput* moveInput;
 PicTextItem::PicTextItem(QGraphicsItem *parent, QGraphicsScene *scene, const SourceType t) :
@@ -38,54 +39,6 @@ QVariant PicTextItem::source()
     return m_source;
 }
 
-QImage clipImage(QImage img, const QRgb bg)
-{
-    QRect clipRect;
-    for(int x = 0; x < img.width(); ++x) {
-        for(int y = 0; y < img.height(); ++y) {
-            auto rgb = img.pixel(x, y);
-            if(rgb != bg) {
-                clipRect.setLeft(x);
-                goto top;
-            }
-        }
-    }
-
-    top:
-    for(int y = 0; y < img.height(); ++y) {
-        for(int x = 0; x < img.width(); ++x) {
-            if(img.pixel(x, y) != bg) {
-                clipRect.setTop(y);
-                goto right;
-            }
-        }
-    }
-
-    right:
-    for(int x = img.width() - 1; x >= 0; --x) {
-        for(int y = 0; y < img.height(); ++y) {
-            if(img.pixel(x, y) != bg) {
-                clipRect.setRight(x + 1);
-                goto bottom;
-            }
-        }
-    }
-
-    bottom:
-    for(int y = img.height() - 1; y >= 0; --y) {
-        for(int x = 0; x < img.width(); ++x) {
-            if(img.pixel(x, y) != bg) {
-                clipRect.setBottom(y + 1);
-                goto end;
-            }
-        }
-    }
-
-    end:
-    QRect originRect = img.rect();
-    return img.copy(clipRect);
-}
-
 QImage PicTextItem::applyImgeTranslation(QImage img)
 {
     auto scaledWidth = boldMultiple() * img.width();
@@ -212,7 +165,7 @@ QRectF PicTextItem::boundingRect() const
     if(sourceType() == SourceType::UNKNOWN)
         return QGraphicsTextItem::boundingRect();
 
-    const QRectF fr(0, 0, m_itemImage.width(), m_itemImage.height());
+    QRectF fr(0, 0, m_itemImage.width(), m_itemImage.height());
     return fr;
 }
 
@@ -437,21 +390,10 @@ QImage PicTextItem::strToImage(const QString &str)
     if(str.isEmpty())
         return QImage();
 
-    QPainter painter;
+    QColor txtColor   = colorReversal() ? QColor(255, 255, 255) : QColor(0, 0, 0);
-    QFontMetrics fm(font());
+    QColor bgColor    = colorReversal() ? QColor(0, 0, 0) : QColor(0, 0, 0, 0);
-    QImage img(fm.horizontalAdvance(str), fm.height(), QImage::Format_ARGB32);
 
-    QRgb txtColor   = colorReversal() ? 0xffffffff : 0xff000000;
+    return ItemUtils::txtToImage(str, font(), txtColor, bgColor);
-    QRgb bgColor    = colorReversal() ? 0xff000000 : 0x00000000;
-
-    img.fill(bgColor);
-    painter.begin(&img);
-    painter.setFont(font());
-    painter.setPen(txtColor);
-    painter.drawText(img.rect(), str);
-    painter.end();
-
-    return clipImage(img, bgColor);
 }
 
 /**

systemsetting.ui

@@ -194,7 +194,7 @@
       </item>
       <item>
        <property name="text">
-        <string>76K</string>
+        <string>83K</string>
        </property>
       </item>
       <item>

testprintwidget.cpp

@@ -69,16 +69,16 @@ TestPrintWidget::TestPrintWidget(QWidget* parent)
     pPicScene = new PicScene(this);
 
     //edit@12-09
-    pPicScene->setSceneRect(QRectF(0,0, 3999, 32));
+    pPicScene->setSceneRect(QRectF(0,0, 3999, SCENE_MAX_HEIGHT));
     ui.graphicsView->setScene(pPicScene);
     ui.graphicsView->centerOn(0,0);
  //   ui->senceEditOption->bindScene(pPicScene, ui->graphicsView, ui->textEdit);
     this->pPicScene->setIsdrawBackground(true);
 
     // 哪个天才写的？拿view和scene计算一下会死吗？
-    for(int i=0;i<3;i++){
+    // for(int i=0;i<3;i++){
-        on_enlargeButton_pressed();
+    //     on_enlargeButton_pressed();
-    }
+    // }
 
     connect(pPicScene,&PicScene::selectionChanged,this,[=]() {
         getShowSelectItemText();
@@ -178,7 +178,7 @@ TestPrintWidget::TestPrintWidget(QWidget* parent)
 
         if (ret == QMessageBox::Ok){
             disconnect(dialogSaveFile,SIGNAL(saveFile(QString,bool)),0,0);
-            connect(dialogSaveFile,SIGNAL(saveFile(QString,bool)),this,SLOT(onSaveASFile(QString,bool)));
+            connect(dialogSaveFile,SIGNAL(saveFile(QString,bool)),this,SLOT(onSaveASFile(QString,bool)), Qt::DirectConnection);
             dialogSaveFile->saveLastWork();
             emit sig_updatePrintContent();
         } else {
@@ -400,7 +400,7 @@ void TestPrintWidget::on_saveButton_pressed()
         qDebug()<<"xml file null";
 #ifdef MYSAVEFILEDLG
         disconnect(dialogSaveFile,SIGNAL(saveFile(QString,bool)),0,0);
-        connect(dialogSaveFile,SIGNAL(saveFile(QString,bool)),this,SLOT(onSaveASFile(QString,bool)));
+        connect(dialogSaveFile,SIGNAL(saveFile(QString,bool)),this,SLOT(onSaveASFile(QString,bool)), Qt::DirectConnection);
         dialogSaveFile->refreshListView(editMode);
         dialogSaveFile->show();
         dialogSaveFile->setEnterFileName("");
@@ -609,6 +609,19 @@ void TestPrintWidget::onFileOpen(QString filePath,bool reviewFlag){
                     }
                 }
             }
+            // 主动暂停打印
+            if(reviewFlag) {
+                emit sig_stopPrint();
+
+                // xmlfileName 会被 saveLastWork 更改，因此此处暂存变量， 在执行后恢复
+                qDebug() << "xmlfileName:" << xmlfileName;
+                auto filename = xmlfileName;
+                disconnect(dialogSaveFile,SIGNAL(saveFile(QString,bool)),0,0);
+                connect(dialogSaveFile,SIGNAL(saveFile(QString,bool)),this,SLOT(onSaveASFile(QString,bool)), Qt::DirectConnection);
+                dialogSaveFile->saveLastWork();
+                xmlfileName = filename;
+                disconnect(dialogSaveFile,SIGNAL(saveFile(QString,bool)),0,0);
+            }
 
             emit sendButtonClickedSignal(20);  //打开文件完成跳转到主窗口
         }
@@ -1062,6 +1075,26 @@ bool TestPrintWidget::eventFilter(QObject *watched, QEvent *event) {
     return QWidget::eventFilter(watched, event);
 }
 
+void TestPrintWidget::showEvent(QShowEvent *event)
+{
+    QWidget::showEvent(event);
+    
+    pPicScene->update();
+    auto sceneRect = pPicScene->sceneRect();
+    // qreal sceneHeight = boundingRect.height() > (qreal)(sysPara->para.canvasHeight) ? SCENE_MAX_HEIGHT : (qreal)(sysPara->para.canvasHeight);
+    qreal sceneHeight = qMin(qreal(SCENE_MAX_HEIGHT), (qreal)(sysPara->para.canvasHeight));
+    sceneRect.setHeight(sceneHeight);
+    pPicScene->setSceneRect(sceneRect);
+
+    // 以高度为基准 最大化显示场景到 视口
+    auto viewportHeight = pViewer->viewport()->height();
+    QTransform transform = pViewer->transform();
+    auto targetScale = viewportHeight / sceneRect.height();
+    double currentScale = transform.m11(); 
+    double relativeScale = targetScale / currentScale;
+    pViewer->scale(relativeScale, relativeScale);
+}
+
 void TestPrintWidget::onBtn3DClicked()
 {
 #if defined(ARCH_AARCH64)

testprintwidget.h

@@ -84,9 +84,7 @@ public:
 
     bool addItemFlag;
 //    QString getReplateAfterStr(QString);
-//    QMap<int,QString> varReplaceItemMap;
 
-    QMap<int,ItemReplaceInfo> varReplaceItemMap;
 public slots:
     void on_enlargeButton_pressed();
     void on_addButton_pressed(const SourceType type = SourceType::UNKNOWN);
@@ -112,6 +110,8 @@ protected:
     // 重写事件过滤器
     bool eventFilter(QObject *watched, QEvent *event) override;
 
+    void showEvent(QShowEvent* event) override;
+
 private slots:
     void onSceneFocusedItemPosChanged(QPoint p);
     void onBtn3DClicked();
@@ -214,6 +214,7 @@ private:
     void selectItemByDirection(bool forward);
 
 signals:
+    void sig_stopPrint();
     void sendButtonClickedSignal(int index);
     void sendUpdateFontSignl(int);