完善RFID卡

DevOp.cpp

@@ -2436,6 +2436,9 @@ unsigned short short2BCD(unsigned short value)
 unsigned char dataofa[1];
 unsigned int volGap;
 int DevOp::writeFpgaPrintPara(bool ignoreWarn){
+
+    qDebug() << "writeFpgaPrintPara: ignoreWarn " << ignoreWarn;
+
     unsigned int type = sysPara->status.fpgaVersionNum >> 12;
 //     unsigned int type = 6;
 //    if((sysPara->para.currPrintMode == FAST_PRINT) && !sysPara->para.charWidthSetEnable
@@ -3632,6 +3635,18 @@ void DevOp::writeFlightCompCtrl()
     fpgaWr(FLIGHT_COMP_CTRL_BASE, (unsigned char*)(&flightComCtrl), sizeof(FlightComCtrl_t));
 }
 
+void DevOp::writeSyncAndDelayPrintCount(bool enb, uint32_t maxCount)
+{
+    static uint8_t buffer[5] = {0};
+    buffer[0] = enb ? 1 : 0;
+    buffer[1] = maxCount & 0xFF;
+    buffer[2] = (maxCount >> 8) & 0xFF;
+    buffer[3] = (maxCount >> 16) & 0xFF;
+    buffer[4] = (maxCount >> 24) & 0xFF;
+
+    fpgaWr(MAX_REPEAT_COUNT_DELAY_SYNC, &buffer, sizeof(buffer));
+}
+
 void DevOp::resendSTM32Date(int cmd, int addr, unsigned char *dat, int len, int type)
 {
     emit sendSerialDataToSTM32(cmd,addr,dat,len,type);

DevOp.h

@@ -167,6 +167,9 @@ class SysPara;
 // 墨点飞行补偿控制写地址，具体引用于 DevOp::writeFlightCompCtrl
 #define FLIGHT_COMP_CTRL_BASE 0xA4A0
 
+// 时延模式、同步器模式 下，重复打印的次数 ，使能标记地址
+#define MAX_REPEAT_COUNT_DELAY_SYNC 0xA482
+
 /*
  * 请不要直接初始化此函数，如果需要，请通过SysPara的devOP来访问此类
  * */
@@ -305,8 +308,21 @@ public :
      */
     void writeFlightCompCtrl(bool enb, bool enbAccelDecelPredict, quint32 flightCompWindow);
 
+    /**
+     * @brief 写入飞行时间补偿控制，使用此函数的前提是之前已经调用过 writeFlightCompCtrl(bool enb, bool enbAccelDecelPredict, quint32 flightCompWindow)
+     * 参数使用之前缓存的参数
+     * 
+     */
     void writeFlightCompCtrl();
 
+    /**
+     * @brief 写入时延模式、同步器模式 下，重复打印的次数 ，使能标记
+     * 
+     * @param enb 启用或关闭重复打印的次数 ，使能标记
+     * @param maxCount 重复打印的次数
+     */
+    void writeSyncAndDelayPrintCount(bool enb, uint32_t maxCount);
+
 public slots:
 
     void resendFPGADate(int,int,unsigned char *,int,int);

DialogFileOperation.cpp

@@ -284,3 +284,11 @@ void DialogFileOperation::modbus_openfile(QString filename)
 {
     emit openFile(filename,true);
 }
+
+void DialogFileOperation::openLastWork()
+{
+    QString dirPath = ui->radioButtonLocal->isChecked()?DOC_ROOT_DIR:UDISK_DOC_ROOT_DIR;
+    QString filePath = dirPath  + "LastWork.xml";
+
+    emit openFile(filePath,true);
+}

DialogFileOperation.h

@@ -17,7 +17,10 @@ public:
     ~DialogFileOperation();
     void refreshListView(int mode);
     void modbus_openfile(QString filename);
-       int EditMode;
+    int EditMode;
+
+    // 打开最后一次作业文件
+    void openLastWork();
 private slots:
 
     // 260410 打开文件界面去掉多余按钮，只保留打开文件按钮，其他删除文件，导出文件，导入文件在另外界面做

DialogSaveFile.cpp

@@ -170,3 +170,11 @@ void DialogSaveFile::setTitleTxt(QString str)
     setWindowTitle(str);
 }
 
+void DialogSaveFile::saveLastWork()
+{
+    QString dirPath = ui->radioButtonLocal->isChecked()?DOC_ROOT_DIR:UDISK_DOC_ROOT_DIR;
+    QString filePath = dirPath  + "LastWork.xml";
+
+    emit saveFile(filePath,false);
+}
+

DialogSaveFile.h

@@ -21,6 +21,8 @@ public:
     void setEnterFileName(QString strFile);
     void setTitleTxt(QString str);
 
+    // 默认保存最后一次作业文件
+    void saveLastWork();
 private slots:
 
 

InkJetPrinter.cpp

@@ -112,6 +112,7 @@ void InkJetPrinter::init()
 
     // TestPrintWidget::sendButtonClickedSignal(16) 转由 openDatetimeEditor 处理
     connect(m_TestPrintWidget, &TestPrintWidget::sig_showEditDateTime, this, &InkJetPrinter::openDatetimeEditor);
+    connect(m_TestPrintWidget, &TestPrintWidget::sig_updatePrintContent, this, &InkJetPrinter::slt_updatePrintContent);
 
     // 班时元素与编辑 连接
     connect(m_TestPrintWidget, &TestPrintWidget::sig_showScheduleShiftsEditor, this, &InkJetPrinter::showScheduleShiftsEditor);
@@ -140,7 +141,7 @@ void InkJetPrinter::init()
     connect(m_MainInstruction,&MainInstruction::newFileBtnClick,m_TestPrintWidget,&TestPrintWidget::on_newfileButton_pressed);
 
 //    connect(myInputMethod,&MyInputMethod::sendEnterClickedSignal,&TestPrintWidget::onEditItemDone);
-    connect(myInputMethod,SIGNAL(sendEnterClickedSignal()),m_TestPrintWidget,SLOT(onEditItemDone()));
+    // connect(myInputMethod,SIGNAL(sendEnterClickedSignal()),m_TestPrintWidget,SLOT(onEditItemDone()));
     connect(m_DateVarSet,SIGNAL(backSpaceBtn()),myInputMethod,SLOT(backSapceButtonDel()));
     connect(m_TestPrintWidget,SIGNAL(sendUpdateFontSignl(int)),m_FontSetWidget,SLOT(updateFontSelect(int)));
 
@@ -283,12 +284,13 @@ void InkJetPrinter::init()
     connect(m_SystemUpdate,&SystemUpdate::sendButtonClickedSignal,this,&InkJetPrinter::getSystemManageWidgetButtonClickSlot);
     connect(m_SystemUpdate,&SystemUpdate::sig_reboot,this,&InkJetPrinter::rebootApp);
 
-    
     // 原注释的默认页面设置（按需启用）
-
     sysPara->status.machineMac = m_MainInstruction->dlgInputAddr->jd.addr;
     sysPara->para.rfidCountDown = 5;
 
+    if (m_TestPrintWidget)
+        m_TestPrintWidget->loadLastWork();
+
     timer = new QTimer();
     connect(timer, SIGNAL(timeout()), this, SLOT(timerHandler()));
     timer->start(10);
@@ -330,7 +332,22 @@ void InkJetPrinter::slt_warningMaintenance()
 
 }
 
-void InkJetPrinter::enableInkJetTabClick(bool flag){
+void InkJetPrinter::showEvent(QShowEvent *e)
+{
+    static bool firstShow = true;
+
+    QWidget::showEvent(e);
+
+    if(firstShow) {
+        if (m_TestPrintWidget)
+            m_TestPrintWidget->loadLastWork();
+
+        firstShow = false;
+    }
+}
+
+void InkJetPrinter::enableInkJetTabClick(bool flag)
+{
     this->setEnabled(flag);
 }
 
@@ -667,7 +684,8 @@ void InkJetPrinter::timerHandler(void){
             }
             if(!gearPumpRunFlag)
             {
-                m_MainWidget->enableReclaimCtrlButton(false);
+                m_MainWidget->setReclaimOpenBtnStatus(false);
+                m_MainWidget->setReclaimCloseBtnStatus(false);
             }
         }
         else
@@ -1010,7 +1028,10 @@ void InkJetPrinter::timerHandler(void){
                     /*-----------------------------------------------------*/
                     if(!sysPara->status.selfCheckCnt) {
                         LogInfo::setRunStatusText(tr("开始自检,请等待60秒..."));
-                        m_MainWidget->enableReclaimCtrlButton(false);
+                        
+                        m_MainWidget->setReclaimOpenBtnStatus(false);
+                        m_MainWidget->setReclaimCloseBtnStatus(false);
+
                         m_MainWidget->enablePrintButton(false);
                         sysPara->devOp->mainInkCtrl();
                         sysPara->para.TrunOnPowerCnt++;// 20151218 开机次数加1
@@ -1026,8 +1047,11 @@ void InkJetPrinter::timerHandler(void){
                         m_MainWidget->setRunStatus(tr("开始自检,请等待%1秒...").
                             arg((MAX_SELF_CHECK_CNT - sysPara->status.selfCheckCnt)/100));
                     }
-
+#ifdef QT_DEBUG
+                    if(sysPara->status.selfCheckCnt >= 1500) // 测试自检改为15s
+#else
                     if(sysPara->status.selfCheckCnt >= MAX_SELF_CHECK_CNT)
+#endif
                     {
                         sysPara->status.selfCheckDone = 1;
                         // 自检完成后管道恢复正常阻力，重置软启动让压力重新平稳收敛
@@ -1042,7 +1066,10 @@ void InkJetPrinter::timerHandler(void){
                         LogInfo::setRunStatusText(tr("自检完成!!!"));
                         m_MainWidget->setRunStatus(tr("自检完成!!!"));
                         qDebug()<<"自检完成!!!";
-                        m_MainWidget->enableReclaimCtrlButton(true);
+                        
+                        m_MainWidget->setReclaimOpenBtnStatus(true);
+                        m_MainWidget->setReclaimCloseBtnStatus(false);
+
                         sysPara->devOp->mainInkCtrl();
                         sysPara->status.canRunAirPushing = true;
 
@@ -1052,12 +1079,23 @@ void InkJetPrinter::timerHandler(void){
                         sysPara->devOp->writeFpgaCalandar(0);
                         sysPara->devOp->writeFpgaPrintPara(true);
 
+                        #ifdef __RFID_CARD
+                        // 刷卡判定
+                        if(sysPara->RFIDPara.inkCardTimeOut
+                                || sysPara->RFIDPara.solventCardTimeOut
+                                || sysPara->RFIDPara.needMaintenance) {
+                            m_MainWidget->setReclaimOpenBtnStatus(false);
+                            LogInfo::setRunStatusText(tr("Need maintenance."));
+                        }
+                        #endif
+
                         if(sysPara->para.Reciclar)
                             test_flag = 1;
                     }
                     else {
                         if((sysPara->status.selfCheckCnt % 200) == 0)
-                            m_MainWidget->enableReclaimCtrlButton(false);
+                            m_MainWidget->setReclaimOpenBtnStatus(false);
+                            m_MainWidget->setReclaimCloseBtnStatus(false);
                     }
 
                 }
@@ -1456,7 +1494,6 @@ void InkJetPrinter::getTestPrintWidgetButtonClickedSlot(int index)
     {
         m_StackedWidget->setCurrentWidget(m_MainWidget);
          MySleep(200);
-//        m_MainWidget->PreviewPressed();
          m_MainWidget->onPreviewScene();
         break;
     }
@@ -1484,6 +1521,12 @@ void InkJetPrinter::openDatetimeEditor(DateItemModel dateModel, TextItemModel te
     m_StackedWidget->setCurrentWidget(m_DateVarSet);
 }
 
+void InkJetPrinter::slt_updatePrintContent()
+{
+    m_MainWidget->onPreviewScene();
+    m_MainWidget->SendPrintDataToFpga(0);
+}
+
 void InkJetPrinter::getFontSetWidgetButtonClickedSlot(int index)
 {
     switch (index)
@@ -2445,6 +2488,8 @@ void InkJetPrinter::detectAndcontrolReclaimTank(){
 
         qDebug()<<"reclaimTankOpenDone currReclaimTankPos:"<<sysPara->status.currReclaimTankPos;
         qDebug()<<"reclaimTankOpenDone curr_reclaimTankTime:"<<sysPara->status.curr_reclaimTankTime;
+
+        LogInfo::setRunStatusText("reclaimTankOpenDone currReclaimTankPos:"+QString::number(sysPara->status.currReclaimTankPos));
     }
     else  if(sysPara->status.reclaimTankstatus == 0x11 )//7 故障，6 关完成，5开完成，4 保持， 3 停止， 2 关， 1 开，0-无操作
     {
@@ -2453,8 +2498,11 @@ void InkJetPrinter::detectAndcontrolReclaimTank(){
     }
     else  if(sysPara->status.reclaimTankstatus == 1 || sysPara->status.reclaimTankstatus == 2)//7 故障，6 关完成，5开完成，4 保持， 3 停止， 2 关， 1 开，0-无操作
     {
-        sysPara->status.reclaimBlockedCnt = 0;
+        auto recliamTime = (sysPara->para.reclaimTankTime != 0 ? sysPara->para.reclaimTankTime : 15.0f) * 10.0f;
+        int rate = qBound(0, 100, int((sysPara->status.currReclaimTankPos / recliamTime) * 100));
+        m_MainWidget->setReclaimStatus(sysPara->status.reclaimTankstatus == 1, rate);
 
+        sysPara->status.reclaimBlockedCnt = 0;
     }
     else  if(sysPara->status.reclaimTankstatus == 6 )//7 故障，6 关完成，5开完成，4 保持， 3 停止， 2 关， 1 开，0-无操作
     {
@@ -2468,9 +2516,7 @@ void InkJetPrinter::detectAndcontrolReclaimTank(){
         sysPara->status.reclainCloseAppending=false;
         sysPara->status.canRunAirPushing = true; //下次开回收槽就执行排气程序
 
-        // 过度占用日志，由Byons注释于2026年4月22日
-        // qDebug()<<"reclaimTankCloseDone currReclaimTankPos:"<<sysPara->status.currReclaimTankPos;
-        // qDebug()<<"reclaimTankCloseDone curr_reclaimTankTime:"<<sysPara->status.curr_reclaimTankTime;
+        LogInfo::setRunStatusText("reclaimTankCloseDone currReclaimTankPos:"+QString::number(sysPara->status.currReclaimTankPos));
     }
     else  if(sysPara->status.reclaimTankstatus == 0x12 )//7 故障，6 关完成，5开完成，4 保持， 3 停止， 2 关， 1 开，0-无操作
     {
@@ -2656,7 +2702,7 @@ void InkJetPrinter::warningHandler(int type){
     static int i = 1;
     int elasped = curPowerOnDateTime.secsTo(QDateTime::currentDateTime());// 本次开机运行秒数
     if(elasped >= 60*60*i){ //开机后1小时提醒一次,测试时可以缩短
-//    if (elasped > 30*i) {//test
+    // if (elasped > 10*i) {//test
         i++;
         flagOfmtWarning = true;
         flagOfWarning = true;
@@ -2723,9 +2769,9 @@ void InkJetPrinter::warningHandler(int type){
     // 超过48小时后，不会执行这一段
     if(flagOfWarning){
         //48小时后禁用，小时=第一次提示时间到当前时间的间隔秒数/60/60
-        if (type = INK && sysPara->para.flagOfInkWarning)
+        if (type == INK && sysPara->para.flagOfInkWarning)
             warningShow(type,inkTime);
-        else if (type = SOLVENT && sysPara->para.flagOfSolventWarning)
+        else if (type == SOLVENT && sysPara->para.flagOfSolventWarning)
             warningShow(type,solventTime);
 
         flagOfWarning = false;
@@ -2740,8 +2786,7 @@ void InkJetPrinter::warningShow(int type,int num){
             str = tr("请刷墨水卡,请使用原厂墨水耗材,否则机器将在%1小时后禁止使用!").arg(num);
         else if(num == 49)
             str = tr("墨水液位报警超过48小时,机器无法正常打印,请先添加原厂墨水再刷墨水卡,以恢复喷码机的正常工作!");
-        msgtest->setText(str);
-        msgtest->show();
+        slt_showMsg(str);
 //        m_MainWidget->setRunStatus(str);
         LogInfo::setRunStatusText(str);
         qDebug()<<str;
@@ -2751,8 +2796,7 @@ void InkJetPrinter::warningShow(int type,int num){
             str = tr("请刷溶剂卡,请使用原厂溶剂耗材,否则机器将在%1小时后禁止使用!").arg(num);
         else if(num == 49)
             str = tr("溶剂液位报警超过48小时,机器无法正常打印,请先添加溶剂再刷溶剂卡以恢复喷码机的正常工作!");
-        msgtest->setText(str);
-        msgtest->show();
+        slt_showMsg(str);
 //        m_MainWidget->setRunStatus(str);
         LogInfo::setRunStatusText(str);
         qDebug()<<str;
@@ -2762,8 +2806,7 @@ void InkJetPrinter::warningShow(int type,int num){
             str = tr("保养期还有%1天到期,请及时保养,否则喷码机容易损坏").arg(num);
         else
             str = tr("保养期已超过%1天,请进行保养以恢复喷码机的正常使用").arg(num*(-1));
-        msgtest->setText(str);
-        msgtest->show();
+        slt_showMsg(str);
         LogInfo::setRunStatusText(str);
         qDebug()<<str;
     }
@@ -2775,7 +2818,7 @@ void InkJetPrinter::warningShow(int type,int num){
 void InkJetPrinter::createNewJobFile()
 {
     auto currentFile = m_TestPrintWidget->currentFile();
-    if(!currentFile.isEmpty()) {
+    if(!currentFile.isEmpty() && !currentFile.contains("LastWork.xml")) {
         QFileInfo fileInfo(currentFile);
         auto ret = QMessageBox::information(nullptr, "", tr("当前正在使用\r\n %1 \r\n确定要新建文件吗?").arg(fileInfo.baseName()), 
                                             QMessageBox::Ok, QMessageBox::Cancel);
@@ -2797,7 +2840,9 @@ int InkJetPrinter::updateWarningTime(int type){
         file.setFileName("/home/plg/inkRFIDTime.txt");
     else if(type == 2)
         file.setFileName("/home/plg/solventRFIDTime.txt");
-    else return;
+    else 
+        return -1;
+        
     if(!file.exists()){
         LogInfo::setRunStatusText(tr("刷卡倒计时起始时间文件不存在"));
         return -1;
@@ -2923,6 +2968,8 @@ void InkJetPrinter::handleWarnInk()
 
         if(sysPara->status.inkWarningCnt >= DETECT_WARNING_TIME){
             sysPara->para.flagOfInkWarning = true;
+            sysPara->RFIDPara.needInkCard = true;
+            manager_rfid->setInkCardFirstPrompt(true);
             QString strCurDateTime = QDateTime::currentDateTime().toString("yyMMddhhmmss");
             LogInfo::setRunStatusText("Ink warning.");
             qDebug()<<"墨水液位报警";
@@ -2930,6 +2977,9 @@ void InkJetPrinter::handleWarnInk()
                 sysPara->para.inkWarnDate = strCurDateTime.mid(0,6).toInt();
                 sysPara->para.inkWarnTime = strCurDateTime.mid(6,6).toInt();
             }
+
+            warningShow(1, 48);
+
             sysPara->saveParaToFile();
         }
     }
@@ -2975,7 +3025,9 @@ void InkJetPrinter::handleWarnInk()
         // 状态正常但是需要刷卡，说明此时先加的墨水，后面再刷卡
         if(!(sysPara->status.statWarn & WARN_STATUS_INK_WARN)
                 && sysPara->RFIDPara.needInkCard){
+
             sysPara->RFIDPara.addedInk = true;
+
             sysPara->saveRFIDPara();
         }
     }
@@ -2994,6 +3046,8 @@ void InkJetPrinter::handleWarnSolvent()
 
         if(sysPara->status.solventWarningCnt >= DETECT_WARNING_TIME){
             sysPara->para.flagOfSolventWarning = true;
+            sysPara->RFIDPara.needSolventCard = true;
+            manager_rfid->setSolventCardFirstPrompt(true);
             QDateTime curDateTime = QDateTime::currentDateTime();
             QString strCurDateTime = curDateTime.toString("yyMMddhhmmss");
             LogInfo::setRunStatusText("Solvent warning.");
@@ -3002,6 +3056,9 @@ void InkJetPrinter::handleWarnSolvent()
                 sysPara->para.solventWarnDate = strCurDateTime.mid(0,6).toInt();
                 sysPara->para.solventWarnTime = strCurDateTime.mid(6,6).toInt();
             }
+
+            warningShow(2, 48);
+
             sysPara->saveParaToFile();
         }
     }
@@ -3045,6 +3102,7 @@ void InkJetPrinter::handleWarnSolvent()
         // 如果溶剂报警，说明此时先加的溶剂，后面再刷卡
         if(!(sysPara->status.statWarn & WARN_STATUS_SOLV_WARN)
                 && sysPara->RFIDPara.needSolventCard){
+
             sysPara->RFIDPara.addedSolvent = true;
             sysPara->saveRFIDPara();
         }
@@ -3055,7 +3113,8 @@ void InkJetPrinter::handleWarnSolvent()
 
 void InkJetPrinter::slt_showMsg(QString msg)
 {
-    msgtest->setText(msg);
-    msgtest->show();
+    QMessageBox * msgBox = new QMessageBox(QMessageBox::NoIcon, tr("提示"), msg, QMessageBox::StandardButton::Ok);
+    connect(msgBox, &QMessageBox::finished, msgBox, &QMessageBox::deleteLater);
+    msgBox->show();
     LogInfo::setRunStatusText(msg);
 }

InkJetPrinter.h

@@ -135,6 +135,8 @@ private slots:
     void getMainWidgetButtonClickedSlot(int index);
     void getTestPrintWidgetButtonClickedSlot(int index);
     void openDatetimeEditor(DateItemModel dateModel, TextItemModel textItemModel);
+    // 更新打印内容
+    void slt_updatePrintContent();
 //    void getErCodeSettingsWidgetButtonClickedSlot(int index);
 //    void getMainInterfaceWidgetButtonClickedSlot(int index);
     void viscosity_timerHandler();
@@ -193,6 +195,10 @@ private slots:
 signals:
        void maintenanceShow();
 
+
+protected:
+    void showEvent(QShowEvent* e) override;
+
 public slots:
      void close_jd_timer();
      void enableInkJetTabClick(bool flag);

InputMethod.cpp

@@ -1336,6 +1336,11 @@ void InputMethod::on_pushBottonHide_released()
         qte->clearFocus();
     }
     
+    QLineEdit* lineEdit = dynamic_cast<QLineEdit*>(widget);
+    if(lineEdit){
+        lineEdit->clearFocus();
+    }
+
 }
 
 void InputMethod::onHiden(){

ItemEditor.cpp

@@ -17,6 +17,7 @@ ItemEditor::ItemEditor(QWidget *parent) :
     ui->generalSettingsTab->setLayout(gridLayout);
 
     ui->okBtn->setMinimumSize(100, 40);
+    ui->okBtn->setFixedSize(100, 40);
 }
 
 ItemEditor::~ItemEditor()

ItemEditor.ui

@@ -55,42 +55,39 @@
        <height>40</height>
       </size>
      </property>
-     <layout class="QHBoxLayout" name="horizontalLayout">
-      <property name="topMargin">
-       <number>0</number>
+     <widget class="QPushButton" name="okBtn">
+      <property name="geometry">
+       <rect>
+        <x>580</x>
+        <y>0</y>
+        <width>100</width>
+        <height>40</height>
+       </rect>
       </property>
-      <property name="bottomMargin">
-       <number>0</number>
+      <property name="minimumSize">
+       <size>
+        <width>62</width>
+        <height>40</height>
+       </size>
       </property>
-      <item>
-       <spacer name="horizontalSpacer">
-        <property name="orientation">
-         <enum>Qt::Horizontal</enum>
-        </property>
-        <property name="sizeHint" stdset="0">
-         <size>
-          <width>567</width>
-          <height>20</height>
-         </size>
-        </property>
-       </spacer>
-      </item>
-      <item>
-       <widget class="QPushButton" name="okBtn">
-        <property name="minimumSize">
-         <size>
-          <width>100</width>
-          <height>40</height>
-         </size>
-        </property>
-        <property name="styleSheet">
-         <string notr="true">QPushButton {
+      <property name="maximumSize">
+       <size>
+        <width>100</width>
+        <height>40</height>
+       </size>
+      </property>
+      <property name="font">
+       <font>
+        <family>Ubuntu</family>
+        <pointsize>25</pointsize>
+       </font>
+      </property>
+      <property name="styleSheet">
+       <string notr="true">QPushButton {
             background-color: #E6F7FF;
             border: 1px solid #87CEEB;
             border-radius: 4px;
             min-width: 60px;
-            min-height: 40px;
-            font-size: 36px;
       font-family: &quot;Ubuntu&quot;;
        color: #228B22;
         }
@@ -100,22 +97,34 @@
         QPushButton:pressed {
             background-color: #BAE7FF;
         }</string>
-        </property>
-        <property name="text">
-         <string>✓</string>
-        </property>
-       </widget>
-      </item>
-      <item>
-       <widget class="QPushButton" name="closeBtn">
-        <property name="minimumSize">
-         <size>
-          <width>100</width>
-          <height>40</height>
-         </size>
-        </property>
-        <property name="styleSheet">
-         <string notr="true">       QPushButton {
+      </property>
+      <property name="text">
+       <string>✓</string>
+      </property>
+     </widget>
+     <widget class="QPushButton" name="closeBtn">
+      <property name="geometry">
+       <rect>
+        <x>690</x>
+        <y>0</y>
+        <width>100</width>
+        <height>40</height>
+       </rect>
+      </property>
+      <property name="minimumSize">
+       <size>
+        <width>100</width>
+        <height>40</height>
+       </size>
+      </property>
+      <property name="maximumSize">
+       <size>
+        <width>100</width>
+        <height>40</height>
+       </size>
+      </property>
+      <property name="styleSheet">
+       <string notr="true">       QPushButton {
             background-color: #E6F7FF;
             border: 1px solid #87CEEB;
             border-radius: 4px;
@@ -130,13 +139,11 @@
         QPushButton:pressed {
             background-color: #BAE7FF;
         }</string>
-        </property>
-        <property name="text">
-         <string>✕</string>
-        </property>
-       </widget>
-      </item>
-     </layout>
+      </property>
+      <property name="text">
+       <string>✕</string>
+      </property>
+     </widget>
     </widget>
    </item>
    <item row="0" column="0" colspan="2">

LogInfo.cpp

@@ -643,6 +643,9 @@ void LogInfo::slt_cleanOver(bool flag)
 
 void LogInfo::checkReclaimStatus()
 {
+    if(!sysPara)
+        return;
+
     static bool CleanUPEn=1,preCleanUP=0;
     if(!sysPara->para.isCheckMagnet)
     {

MainWidget.ui

@@ -286,9 +286,15 @@ QScrollBar::add-line:horizontal { bottom: 0px; }</string>
             </item>
             <item row="2" column="1">
              <widget class="QFrame" name="sub2">
+              <property name="minimumSize">
+               <size>
+                <width>200</width>
+                <height>0</height>
+               </size>
+              </property>
               <property name="maximumSize">
                <size>
-                <width>250</width>
+                <width>200</width>
                 <height>130</height>
                </size>
               </property>
@@ -383,7 +389,7 @@ QScrollBar::add-line:horizontal { bottom: 0px; }</string>
                     <string>color:#3CB371;font-size:24px;</string>
                    </property>
                    <property name="text">
-                    <string>0007.9</string>
+                    <string>999.99</string>
                    </property>
                   </widget>
                  </item>
@@ -406,7 +412,7 @@ QScrollBar::add-line:horizontal { bottom: 0px; }</string>
                     <string>color:#E72F28;font-size:24px;</string>
                    </property>
                    <property name="text">
-                    <string>0020.3</string>
+                    <string>999.99</string>
                    </property>
                   </widget>
                  </item>

Printsetting.cpp

@@ -124,13 +124,6 @@ void PrintSetting::updateModelFromUI(){
     m_model.eleEyeTriggerPrintDelay = ui->spinBoxEleEyeTriggerPrintDelay->value();
     m_model.timeTriggerPrintMode = 0;
     m_model.triggerInterval = ui->spinBoxEleEyeTriggerIntervalMs->value();
-    int value = 0;
-    if (ui->cb_unlimited->isChecked()) 
-        value = UINT16_MAX;
-    else 
-        value = ui->spinBoxEleEyeTriggerRepeatCnt->value();
-        
-    m_model.eleEyeRepeatCnt = value;
     m_model.encoderPulsePerMm = ui->lineEditTriggerPulsePerMm->text().toFloat();
 
     if(ui->eleEyeEdgetTriggerExternal->isChecked() && ui->radioButtonSynTriggerExternal->isChecked()) {
@@ -164,6 +157,14 @@ void PrintSetting::updateModelFromUI(){
     m_model.outputPulseDelayMs = ui->spinBoxOutputPulseDelayMs->value();
     m_model.OuputPulseCol = ui->spinBoxOuputPulseCol->value();
 
+    unsigned int value = 0;
+    if (ui->cb_unlimited->isChecked()) 
+        value = (m_model.triggerMode == PRINT_TRIGGER_SYNCHRONIZER || m_model.triggerMode == PRINT_TRIGGER_TIME) ? UINT32_MAX : UINT16_MAX;
+    else 
+        value = ui->spinBoxEleEyeTriggerRepeatCnt->value();
+        
+    m_model.eleEyeRepeatCnt = value;
+
     // if (m_model.triggerMode == PRINT_TRIGGER_ELEC_EYE_VOLTATE_LEVEL
     //     || m_model.triggerMode == PRINT_TRIGGER_ELEC_EYE_EDGE
     //     || m_model.triggerMode == PRINT_TRIGGER_SYNCHRONIZER) {
@@ -628,6 +629,12 @@ void PrintSetting::applyPrintSettingsToSysPara(bool showTip)
     PrintSettingModel::applyToSysPara(m_model, sysPara);
 
     if (sysPara->devOp) {
+        sysPara->devOp->writeFpgaPrintPara(false);
+
+        sysPara->devOp->writeSyncAndDelayPrintCount(
+            m_model.triggerMode == PRINT_TRIGGER_SYNCHRONIZER || m_model.triggerMode == PRINT_TRIGGER_TIME, 
+            m_model.eleEyeRepeatCnt);
+
         sysPara->devOp->setHighVoltageAmplitudetoSTM32();
         sysPara->devOp->writeFpgaCalandar(0);
         sysPara->devOp->writeFlightCompCtrl(ui->enbFlightCompCtrl->isChecked(), 
@@ -864,7 +871,9 @@ PrintSettingModel PrintSettingModel::fromSysPara(SysPara *sysPara)
     }
 
     model.timeTriggerPrintMode = sysPara->para.timeTriggerPrintMode;
+
     model.eleEyeRepeatCnt = sysPara->para.photoElectricityRepeateNum;
+
     model.eleEyeTriggerPrintDelay = sysPara->para.eleEyeTriggerPrintDelay;
     model.encoderPulsePerMm = sysPara->para.synPulseNumPerMm;
     model.altMirrorType = sysPara->para.AltMirrorGap >> 12;

Printsetting.ui

@@ -26,7 +26,7 @@
     <enum>Qt::StrongFocus</enum>
    </property>
    <property name="currentIndex">
-    <number>4</number>
+    <number>1</number>
    </property>
    <widget class="QWidget" name="tab">
     <attribute name="title">

SysPara.h

@@ -1054,6 +1054,7 @@ typedef struct{
     unsigned int statWarn:8;				//0x11
     unsigned int viscosity:16;
     unsigned int mainPumpWarm:8;
+    //7 故障，6 关完成，5开完成，4 保持，3 停止，2 关，1 开，0-无操作
     unsigned char reclaimTankstatus;    // 0x31     130113
     unsigned short curr_reclaimTankTime; // 0x32 33  电机当前开关时长(s)  130113
     //unsigned char read_ncba[6]; // 不用 3C

SystemManage.cpp

@@ -1061,6 +1061,9 @@ void SystemManage::inkcloseCountHandler()
 
 //    qDebug()<<"sysMana reclaimOpenCntAfterSWintOf" << sysPara->status.reclaimOpenCntAfterSWintOff;
 //    ui->labelReclaimPump->setText((sysPara->devOp->isReclaimPumpOpen()?tr("开"):tr("关")) + QString("\n%1").arg(sysPara->status.reclaimOpenCntAfterSWintOff));
+    if(!sysPara)
+        return;
+
     if(false == sysPara->devOp->isInkValveOpen())
     {
 //        qDebug()<<"Ink pump is off";

TestPrintWidget.ui

@@ -714,7 +714,6 @@
             </property>
             <property name="font">
              <font>
-              <family>Arial</family>
               <pointsize>-1</pointsize>
              </font>
             </property>

VerBVersion.h

@@ -7,7 +7,7 @@
 #define UP_PRINTER_MAJOR_VER  6
 #define UP_PRINTER_MINOR_VER  7
 #define UP_PRINTER_RIVISION_VER  2
-#define SUB_VERSION "_KOR"
+#define SUB_VERSION "_KOR-T"
 #ifdef __RFID_OLD
 #define SUB_RFID "_RO"
 #else

mainwidget.cpp

@@ -210,7 +210,8 @@ void MainWidget::_on_pushButtonPowerOff_pressed(bool notice)
             on_m_LeftBtn_clicked();
             //on_pushButtonReclaimTankClose_pressed();
             sysPara->status.powerOffAppending = true;
-            enableReclaimCtrlButton(false);			//所有的按钮全部屏蔽
+            setReclaimCloseBtnStatus(false);
+            setReclaimOpenBtnStatus(false);
         }
     }
     else {
@@ -1530,11 +1531,6 @@ int MainWidget::imageToPrintData(QImage &image, int startX, int startY)
     return totalOfProcessedDots;
 }
 
-void MainWidget::enableReclaimCtrlButton(bool enable){
-    m_RightBtn->setEnabled(enable);
-    m_LeftBtn->setEnabled(enable);
-}
-
 void MainWidget::enablePrintButton(bool enable){
 #ifdef QT_DEBUG
     enable = true;
@@ -1669,7 +1665,10 @@ void MainWidget::on_m_StartBtn_clicked()
         sysPara->status.lastSynColDelay = -1;			//目的是为了清空原来的数据
 
         /*---------------------------------开关回收槽------------------------------*/
-        enableReclaimCtrlButton(false);
+        
+        setReclaimCloseBtnStatus(false);
+        setReclaimOpenBtnStatus(false);
+
         updatePrintDisplayLabel();
         // 20170717 移动此，以观察条形码打印异常问题。
         if(!startPrintingFlag)
@@ -1706,7 +1705,9 @@ void MainWidget::on_m_StopBtn_clicked()
         sysPara->devOp->printCtrl( PRINT_CTRL_STOP);//:PRINT_CTRL_STOPSYNCNT
 //        LogInfo::setRunStatusText(tr("停止打印"));
 
-        enableReclaimCtrlButton(true);
+        setReclaimCloseBtnStatus(sysPara->status.currReclaimTankPos != 0);
+        setReclaimOpenBtnStatus(sysPara->status.currReclaimTankPos == 0);
+
         printintFlag = false;
         startPrintingFlag = false;
         updatePrintDisplayLabel();
@@ -1795,6 +1796,16 @@ int MainWidget::getCurrPrintStatus()
     return printStatus;
 }
 
+void MainWidget::setReclaimOpenBtnStatus(bool enable)
+{
+    ui.m_RightBtn->setEnabled(enable);
+}
+
+void MainWidget::setReclaimCloseBtnStatus(bool enable)
+{
+    ui.m_LeftBtn->setEnabled(enable);
+}
+
 void MainWidget::setReclaimStatus(bool isOpen, int rate)
 {
     // if (!sysPara->devOp->isReclaimTankOpenEnable()) {
@@ -1811,6 +1822,7 @@ void MainWidget::setReclaimStatus(bool isOpen, int rate)
         QString str = rate == 0? tr("喷嘴已关闭"):tr("喷嘴关闭中");
         ui.lb_LeftBtn->setText(str);
         ui.lb_RightBtn->setText(tr("喷嘴开启"));
+        // ui.lb_RightBtn->setStyleSheet("color: black;");
     }
 }
 
@@ -2192,9 +2204,9 @@ void MainWidget::updateSysStatusToUI(){ //100ms
                 }
 //                ui->labelSynRate->setText(tr("%1.%2[%3.%4]米/分").arg(mm/1000).arg(mm%1000,3,10,QLatin1Char('0'))
 //                                          .arg(maxMM/1000).arg(maxMM%1000,3,10,QLatin1Char('0')));
-                // 20260414
-                ui.lb_curSpeed->setText(tr("%1.%2").arg(mm/1000).arg(mm%1000,3,10,QLatin1Char('0')));
-                ui.lb_maxSpeed->setText(tr("%1.%2").arg(maxMM/1000).arg(maxMM%1000,3,10,QLatin1Char('0')));
+                // 20260414  0708:为防止变形，保存两位小数
+                ui.lb_curSpeed->setText(tr("%1.%2").arg(mm/1000).arg(mm%1000,2,10,QLatin1Char('0')));
+                ui.lb_maxSpeed->setText(tr("%1.%2").arg(maxMM/1000).arg(maxMM%1000,2,10,QLatin1Char('0')));
             }
             else {
             ui.lb_curSpeed->setText("0");
@@ -2351,13 +2363,6 @@ void MainWidget::updateSysStatusToUI(){ //100ms
         }else{
         //    ui->pushButton_Reboot->setEnabled(false);
         }
-
-        if(sysPara->RFIDPara.inkCardTimeOut || sysPara->RFIDPara.solventCardTimeOut || sysPara->RFIDPara.needMaintenance) {
-            m_RightBtn->setEnabled(false);
-        }
-        else if(sysPara->status.selfCheckDone == 1) {
-            m_RightBtn->setEnabled(true);
-        }
     }
 }
 
@@ -3444,6 +3449,8 @@ void MainWidget::RefreshStatusLight(){//100ms
 
         if(sysPara->status.isPrinting && sysPara->status.selfCheckDone){
                 setRunStatus(tr("正在喷印......."));
+                setReclaimCloseBtnStatus(false);
+                setReclaimOpenBtnStatus(false);
         }
         
         // 20160620   新增主界面显示：压力，粘度，隔膜位置，晶振电压数，相位

mainwidget.h

@@ -76,9 +76,15 @@ public:
 
     void generateCharRamData();
     void setRunStatus(QString str);
-    void enableReclaimCtrlButton(bool);
     void enablePrintButton(bool);
     int getCurrPrintStatus();
+
+    // 回收槽开启按钮状态设置
+    void setReclaimOpenBtnStatus(bool enable);
+
+    // 回收槽关闭按钮状态设置
+    void setReclaimCloseBtnStatus(bool enable);
+
     /**
      * @brief 设置回收槽开关状态
      * @param isOpen true：开；false：关