2026年5月23日暂存

CounterVarSet.cpp

@@ -377,6 +377,59 @@ void CounterVarSet::applyStyleSheet()
             box-shadow: 0 -3px 8px rgba(44, 125, 232, 0.25);
             }
 
+            QRadioButton::indicator {
+            width: 25px;
+            height: 25px;
+            }
+
+            QSpinBox::down-button {
+            width: 23px;   /* 图标显示宽度 */
+            height: 23px;  /* 图标显示高度 */
+            border: 1px solid #333333;
+            border-radius: 3px;
+            background-color: #5396C1;
+            }
+
+            QSpinBox::down-arrow {
+            image: url(image/down_white.png);
+            height: 18px;
+            width: 18px;
+            }
+
+            QSpinBox::up-button {
+            width: 23px;   /* 图标显示宽度 */
+            height: 23px;  /* 图标显示高度 */
+            border: 1px solid #333333;
+            border-radius: 3px;
+            background-color: #5396C1;
+            }
+
+            QSpinBox::up-arrow {
+            image: url(image/up_white.png);
+            height: 18px;
+            width: 18px;
+            }
+
+            QSpinBox {
+            border: 1px solid #333333;
+            }
+
+            QCheckBox {
+            color: #000000;
+            }
+
+            QCheckBox::indicator {
+            width: 15px;
+            height: 15px;
+            border: 1px solid #96A0A9;
+            border-radius: 8px;
+            background-color: #ffffff;
+            }
+
+            QCheckBox::indicator:checked {
+            background-color: #95B2D4;
+            border-color: #95B2D4;
+            }
             )";
 
     this->setStyleSheet(styleSheet);

DevOp.cpp

@@ -3642,16 +3642,19 @@ void DevOp::comForRFID_init(void)
     comForRFID->setPortName("/dev/ttyUSB0");
 #endif
   
+    LogInfo::setRunStatusText("RFID port dev name: " + comForRFID->portName());
     comForRFID->setBaudRate(9600);
     comForRFID->setDataBits(QSerialPort::Data8);
     comForRFID->setParity(QSerialPort::NoParity);
     comForRFID->setStopBits(QSerialPort::OneStop);
     comForRFID->setFlowControl(QSerialPort::NoFlowControl);
     if (comForRFID->open(QIODevice::ReadWrite)) {
-        qDebug() << "RFID串口打开成功";
+        qInfo() << "RFID串口打开成功";
         connect(comForRFID,SIGNAL(readyRead()),this,SLOT(readRFIDData()));
+        LogInfo::setRunStatusText("Successed to open RFID port");
     } else {
         qDebug() << "RFID串口打开失败: " << comForRFID->errorString();
+        LogInfo::setRunStatusText("Failed to open RFID port");
     }
 
 }
@@ -3710,7 +3713,7 @@ int DevOp::comReadRFID_data()
                 //CardDataRwLock.lockForWrite();
                 strRevdata = QString((const char*)temp);
                // CardDataRwLock.unlock();
-                qDebug() << "读数据块成功，数据块6"  << "数据为：" << temp << endl << endl;
+//                qDebug() << "读数据块成功，数据块6"  << "数据为：" << temp << endl << endl;
                 return 1;
             }
         }
@@ -3807,6 +3810,7 @@ int DevOp::RFIDmarkCardUsedAsync(int type)
         qDebug()<<"Cmd["<<i+6<<"]: "<<Cmd[i+6];
     }
 
+//
     if(type == 0) {
       Cmd[6] = 0x10;
       Cmd[7] = 0x0A;
@@ -3908,7 +3912,7 @@ int DevOp::setRFIDCarKey(void)
     }
     MySleep(200);
     int n = RFIDReadData.size();
-    if(n>0)
+    if(n>2)
     {
         recResponse = RFIDReadData;
         RFIDReadData.clear();
@@ -4015,7 +4019,7 @@ int DevOp::setRFIDReaderKey(int mac,int type)
     }
     QElapsedTimer elapsedTimer;
     elapsedTimer.start();
-    while(comForRFID->bytesAvailable() < 8 && !elapsedTimer.hasExpired(2000)) {
+    while(comForRFID->bytesAvailable() < 8 && !elapsedTimer.hasExpired(20000)) {
       QApplication::processEvents(QEventLoop::AllEvents, 100);
     }
 
@@ -4025,7 +4029,7 @@ int DevOp::setRFIDReaderKey(int mac,int type)
     connect(comForRFID, &QSerialPort::readyRead, this, &DevOp::readRFIDData);
 
     if(n < 8) {
-      qDebug() << "读取数据失败, 数据长度不足8字节" << endl << endl;
+      LogInfo::setRunStatusText(u8"读取数据失败, 数据长度不足8字节");
       return -3;
     }
 
@@ -4088,7 +4092,7 @@ int DevOp::setRFIDReaderOriginalKey(void)
     }
     MySleep(200);
     int n = RFIDReadData.size();
-    if(n>0)
+    if(n>2)
     {
         recResponse = RFIDReadData;
         RFIDReadData.clear();
@@ -4151,7 +4155,7 @@ int DevOp::setRFIDReaderWorkMode(void)
 
     QElapsedTimer elapsedTimer;
     elapsedTimer.start();
-    while(comForRFID->bytesAvailable() < 8 && !elapsedTimer.hasExpired(2000)) {
+    while(comForRFID->bytesAvailable() < 8 && !elapsedTimer.hasExpired(20000)) {
       QApplication::processEvents(QEventLoop::AllEvents, 100);
     }
 
@@ -4161,7 +4165,7 @@ int DevOp::setRFIDReaderWorkMode(void)
     connect(comForRFID, &QSerialPort::readyRead, this, &DevOp::readRFIDData);
 
     if(n < 8) {
-      qDebug() << "读取数据失败, 数据长度不足8字节" << endl << endl;
+      LogInfo::setRunStatusText(u8"读取数据失败, 数据长度不足8字节");
       return -2;
     }
 
@@ -4272,7 +4276,7 @@ int DevOp::queryReadRFID_address(void)
     UCHAR revdata[100] = {0};
     if(n > (int)sizeof(revdata)) n = sizeof(revdata);
     memcpy(revdata, RFIDReadData.constData(),  n);
-    if(n>0)
+    if(n>4)
     {
         showData(RFIDReadData);
         if(CheckSumIn(revdata, revdata[1]) == false){

DevOp.h

@@ -226,7 +226,6 @@ public :
 
     /**
      * @brief 向卡片写入当前日期时间，标识该卡片已被使用
-     * @param done 异步回调函数，用于处理写入完成后的操作，参数为写入结果，0表示成功，-1表示卡片已经离开
      */
     int RFIDmarkCardUsedAsync(int type = 0);
     int setRFIDCarKey(void);

DlgRFIDConfig.cpp

@@ -6,8 +6,6 @@ DlgRFIDConfig::DlgRFIDConfig(QWidget *parent) :
     ui(new Ui::DlgRFIDConfig)
 {
     ui->setupUi(this);
-    setWindowFlags(windowFlags() | Qt::Tool | Qt::FramelessWindowHint | Qt::BypassWindowManagerHint);
-
 }
 
 DlgRFIDConfig::~DlgRFIDConfig()

DlgVoltePara25Dots.cpp

@@ -0,0 +1,423 @@
+#include "DlgVoltePara25Dots.h"
+#include "DevOp.h"
+#include <QHeaderView>
+#include <QIntValidator>
+#include <QLineEdit>
+#include <QScrollArea>
+
+DlgVoltePara25Dots::DlgVoltePara25Dots(DevOp *devOp, QWidget *parent)
+    : QDialog(parent)
+    , m_devOp(devOp)
+    , tableSingleDot1(nullptr)
+    , tableSingleDotFirst1(nullptr)
+    , table2Dots(nullptr)
+    , table3Dots(nullptr)
+    , table4Dots(nullptr)
+    , table5Dots(nullptr)
+    , tableContinuous(nullptr)
+    , tableDiffVoltage(nullptr)
+    , tableExtraLine(nullptr)
+    , tableFirstOnePointExtra(nullptr)
+    , tableAdjustPara(nullptr)
+    , tableGiantPoint(nullptr)
+{
+    setupUI();
+}
+
+DlgVoltePara25Dots::~DlgVoltePara25Dots()
+{
+}
+
+// 创建通用表格
+QTableWidget* DlgVoltePara25Dots::createTable(int rows, int cols, int minVal, int maxVal)
+{
+    QTableWidget *table = new QTableWidget(rows, cols, this);
+    table->setMinimumHeight(200);
+
+    // 设置行头（通道编号）
+    QStringList rowHeaders;
+    for (int i = 0; i < rows; i++) {
+        rowHeaders << QString::number(i);
+    }
+    table->setVerticalHeaderLabels(rowHeaders);
+
+    // 设置列头（点序号）
+    QStringList colHeaders;
+    for (int i = 0; i < cols; i++) {
+        if (cols == 1)
+            colHeaders << QString("值");
+        else
+            colHeaders << QString("点%1").arg(i + 1);
+    }
+    table->setHorizontalHeaderLabels(colHeaders);
+
+    // 初始化所有单元格为 0
+    for (int r = 0; r < rows; r++) {
+        for (int c = 0; c < cols; c++) {
+            QTableWidgetItem *item = new QTableWidgetItem("0");
+            item->setTextAlignment(Qt::AlignCenter);
+            table->setItem(r, c, item);
+        }
+    }
+
+    // 设置行高适配触屏
+    table->verticalHeader()->setDefaultSectionSize(30);
+    table->horizontalHeader()->setDefaultSectionSize(60);
+
+    Q_UNUSED(minVal);
+    Q_UNUSED(maxVal);
+
+    return table;
+}
+
+void DlgVoltePara25Dots::setupUI()
+{
+    setWindowTitle(QString("25点阵充电参数编辑"));
+    resize(800, 600);
+
+    QVBoxLayout *mainLayout = new QVBoxLayout(this);
+    mainLayout->setContentsMargins(4, 4, 4, 4);
+    mainLayout->setSpacing(4);
+
+    // 选项卡
+    tabWidget = new QTabWidget(this);
+    tabWidget->addTab(createTab_SingleDot(),    QString("单点"));
+    tabWidget->addTab(createTab_2Dots(),        QString("2点连续"));
+    tabWidget->addTab(createTab_3Dots(),        QString("3点连续"));
+    tabWidget->addTab(createTab_4Dots(),        QString("4点连续"));
+    tabWidget->addTab(createTab_5Dots(),        QString("5点连续"));
+    tabWidget->addTab(createTab_Continuous(),   QString("连续点"));
+    tabWidget->addTab(createTab_DiffVoltage(),  QString("差分补偿"));
+    tabWidget->addTab(createTab_ExtraLine(),    QString("行补偿"));
+    tabWidget->addTab(createTab_GiantPoint(),   QString("巨点补偿"));
+    mainLayout->addWidget(tabWidget);
+
+    // 底部按钮栏
+    QHBoxLayout *btnLayout = new QHBoxLayout();
+    btnLoad = new QPushButton(QString("读取当前值"), this);
+    btnSave = new QPushButton(QString("保存并推送FPGA"), this);
+    btnLoad->setMinimumHeight(40);
+    btnSave->setMinimumHeight(40);
+    btnLayout->addWidget(btnLoad);
+    btnLayout->addStretch();
+    btnLayout->addWidget(btnSave);
+    mainLayout->addLayout(btnLayout);
+
+    connect(btnLoad, SIGNAL(clicked()), this, SLOT(onBtnLoadClicked()));
+    connect(btnSave, SIGNAL(clicked()), this, SLOT(onBtnSaveClicked()));
+}
+
+// ========== 选项卡创建 ==========
+
+QWidget* DlgVoltePara25Dots::createTab_SingleDot()
+{
+    QWidget *page = new QWidget(this);
+    QVBoxLayout *layout = new QVBoxLayout(page);
+
+    QLabel *label1 = new QLabel(QString("单点 DAC (matchTotalTableDACArray1)"), page);
+    tableSingleDot1 = createTable(64, 1, 0, 65535);
+    layout->addWidget(label1);
+    layout->addWidget(tableSingleDot1);
+
+    QLabel *label2 = new QLabel(QString("首单点 DAC (matchTotalTableDACArrayFirst1)"), page);
+    tableSingleDotFirst1 = createTable(64, 1, 0, 65535);
+    layout->addWidget(label2);
+    layout->addWidget(tableSingleDotFirst1);
+
+    return page;
+}
+
+QWidget* DlgVoltePara25Dots::createTab_2Dots()
+{
+    QWidget *page = new QWidget(this);
+    QVBoxLayout *layout = new QVBoxLayout(page);
+
+    table2Dots = createTable(64, 2, 0, 65535);
+    layout->addWidget(table2Dots);
+
+    return page;
+}
+
+QWidget* DlgVoltePara25Dots::createTab_3Dots()
+{
+    QWidget *page = new QWidget(this);
+    QVBoxLayout *layout = new QVBoxLayout(page);
+
+    table3Dots = createTable(64, 3, 0, 65535);
+    layout->addWidget(table3Dots);
+
+    return page;
+}
+
+QWidget* DlgVoltePara25Dots::createTab_4Dots()
+{
+    QWidget *page = new QWidget(this);
+    QVBoxLayout *layout = new QVBoxLayout(page);
+
+    table4Dots = createTable(64, 4, 0, 65535);
+    layout->addWidget(table4Dots);
+
+    return page;
+}
+
+QWidget* DlgVoltePara25Dots::createTab_5Dots()
+{
+    QWidget *page = new QWidget(this);
+    QVBoxLayout *layout = new QVBoxLayout(page);
+
+    table5Dots = createTable(64, 5, 0, 65535);
+    layout->addWidget(table5Dots);
+
+    return page;
+}
+
+QWidget* DlgVoltePara25Dots::createTab_Continuous()
+{
+    QWidget *page = new QWidget(this);
+    QVBoxLayout *layout = new QVBoxLayout(page);
+
+    QLabel *label = new QLabel(QString("连续点 DAC (matchContinousDACArray)"), page);
+    tableContinuous = createTable(64, 1, 0, 65535);
+    layout->addWidget(label);
+    layout->addWidget(tableContinuous);
+
+    return page;
+}
+
+QWidget* DlgVoltePara25Dots::createTab_DiffVoltage()
+{
+    QWidget *page = new QWidget(this);
+    QVBoxLayout *layout = new QVBoxLayout(page);
+
+    QLabel *label = new QLabel(QString("差分电压补偿 (matchTotalDiffVoltageValue) [50×64]"), page);
+    tableDiffVoltage = createTable(50, 64, -128, 127);
+    layout->addWidget(label);
+    layout->addWidget(tableDiffVoltage);
+
+    return page;
+}
+
+QWidget* DlgVoltePara25Dots::createTab_ExtraLine()
+{
+    QWidget *page = new QWidget(this);
+    QVBoxLayout *layout = new QVBoxLayout(page);
+
+    QLabel *label1 = new QLabel(QString("额外行补偿 (matchExtraLineDACArray)"), page);
+    tableExtraLine = createTable(64, 1, 0, 255);
+    layout->addWidget(label1);
+    layout->addWidget(tableExtraLine);
+
+    QLabel *label2 = new QLabel(QString("首单点行补偿 (matchFirstOnePointExtraLineDACArray)"), page);
+    tableFirstOnePointExtra = createTable(64, 1, -128, 127);
+    layout->addWidget(label2);
+    layout->addWidget(tableFirstOnePointExtra);
+
+    return page;
+}
+
+QWidget* DlgVoltePara25Dots::createTab_GiantPoint()
+{
+    QWidget *page = new QWidget(this);
+    QVBoxLayout *layout = new QVBoxLayout(page);
+
+    QLabel *label1 = new QLabel(QString("巨点调整参数 (matchAdjustParaDACArray) [8]"), page);
+    tableAdjustPara = createTable(8, 1, -128, 127);
+    layout->addWidget(label1);
+    layout->addWidget(tableAdjustPara);
+
+    QLabel *label2 = new QLabel(QString("巨点电压补偿 (matchGiantPointVoltageValue) [16×64]"), page);
+    tableGiantPoint = createTable(16, 64, -128, 127);
+    layout->addWidget(label2);
+    layout->addWidget(tableGiantPoint);
+
+    return page;
+}
+
+// ========== 数据加载：结构体 → UI ==========
+
+void DlgVoltePara25Dots::loadDataToUI()
+{
+    if (!sysPara) return;
+
+    voltePara_t_25Dots &data = sysPara->voltePara_25Dots;
+
+    // matchTotalTableDACArray1[64]
+    for (int i = 0; i < 64; i++) {
+        tableSingleDot1->item(i, 0)->setText(QString::number(data.matchTotalTableDACArray1[i]));
+    }
+
+    // matchTotalTableDACArrayFirst1[64]
+    for (int i = 0; i < 64; i++) {
+        tableSingleDotFirst1->item(i, 0)->setText(QString::number(data.matchTotalTableDACArrayFirst1[i]));
+    }
+
+    // matchTotalTableDACArray2[64][2]
+    for (int i = 0; i < 64; i++) {
+        for (int j = 0; j < 2; j++) {
+            table2Dots->item(i, j)->setText(QString::number(data.matchTotalTableDACArray2[i][j]));
+        }
+    }
+
+    // matchTotalTableDACArray3[64][3]
+    for (int i = 0; i < 64; i++) {
+        for (int j = 0; j < 3; j++) {
+            table3Dots->item(i, j)->setText(QString::number(data.matchTotalTableDACArray3[i][j]));
+        }
+    }
+
+    // matchTotalTableDACArray4[64][4]
+    for (int i = 0; i < 64; i++) {
+        for (int j = 0; j < 4; j++) {
+            table4Dots->item(i, j)->setText(QString::number(data.matchTotalTableDACArray4[i][j]));
+        }
+    }
+
+    // matchTotalTableDACArray5[64][5]
+    for (int i = 0; i < 64; i++) {
+        for (int j = 0; j < 5; j++) {
+            table5Dots->item(i, j)->setText(QString::number(data.matchTotalTableDACArray5[i][j]));
+        }
+    }
+
+    // matchContinousDACArray[64]
+    for (int i = 0; i < 64; i++) {
+        tableContinuous->item(i, 0)->setText(QString::number(data.matchContinousDACArray[i]));
+    }
+
+    // matchTotalDiffVoltageValue[50][64]
+    for (int i = 0; i < 50; i++) {
+        for (int j = 0; j < 64; j++) {
+            tableDiffVoltage->item(i, j)->setText(QString::number((qint8)data.matchTotalDiffVoltageValue[i][j]));
+        }
+    }
+
+    // matchExtraLineDACArray[64]
+    for (int i = 0; i < 64; i++) {
+        tableExtraLine->item(i, 0)->setText(QString::number(data.matchExtraLineDACArray[i]));
+    }
+
+    // matchFirstOnePointExtraLineDACArray[64]
+    for (int i = 0; i < 64; i++) {
+        tableFirstOnePointExtra->item(i, 0)->setText(QString::number((qint8)data.matchFirstOnePointExtraLineDACArray[i]));
+    }
+
+    // matchAdjustParaDACArray[8]
+    for (int i = 0; i < 8; i++) {
+        tableAdjustPara->item(i, 0)->setText(QString::number((qint8)data.matchAdjustParaDACArray[i]));
+    }
+
+    // matchGiantPointVoltageValue[16][64]
+    for (int i = 0; i < 16; i++) {
+        for (int j = 0; j < 64; j++) {
+            tableGiantPoint->item(i, j)->setText(QString::number((qint8)data.matchGiantPointVoltageValue[i][j]));
+        }
+    }
+}
+
+// ========== 数据保存：UI → 结构体 ==========
+
+void DlgVoltePara25Dots::saveDataFromUI()
+{
+    if (!sysPara) return;
+
+    voltePara_t_25Dots &data = sysPara->voltePara_25Dots;
+
+    // matchTotalTableDACArray1[64]
+    for (int i = 0; i < 64; i++) {
+        data.matchTotalTableDACArray1[i] = (quint16)tableSingleDot1->item(i, 0)->text().toUInt();
+    }
+
+    // matchTotalTableDACArrayFirst1[64]
+    for (int i = 0; i < 64; i++) {
+        data.matchTotalTableDACArrayFirst1[i] = (quint16)tableSingleDotFirst1->item(i, 0)->text().toUInt();
+    }
+
+    // matchTotalTableDACArray2[64][2]
+    for (int i = 0; i < 64; i++) {
+        for (int j = 0; j < 2; j++) {
+            data.matchTotalTableDACArray2[i][j] = (quint16)table2Dots->item(i, j)->text().toUInt();
+        }
+    }
+
+    // matchTotalTableDACArray3[64][3]
+    for (int i = 0; i < 64; i++) {
+        for (int j = 0; j < 3; j++) {
+            data.matchTotalTableDACArray3[i][j] = (quint16)table3Dots->item(i, j)->text().toUInt();
+        }
+    }
+
+    // matchTotalTableDACArray4[64][4]
+    for (int i = 0; i < 64; i++) {
+        for (int j = 0; j < 4; j++) {
+            data.matchTotalTableDACArray4[i][j] = (quint16)table4Dots->item(i, j)->text().toUInt();
+        }
+    }
+
+    // matchTotalTableDACArray5[64][5]
+    for (int i = 0; i < 64; i++) {
+        for (int j = 0; j < 5; j++) {
+            data.matchTotalTableDACArray5[i][j] = (quint16)table5Dots->item(i, j)->text().toUInt();
+        }
+    }
+
+    // matchContinousDACArray[64]
+    for (int i = 0; i < 64; i++) {
+        data.matchContinousDACArray[i] = (quint16)tableContinuous->item(i, 0)->text().toUInt();
+    }
+
+    // matchTotalDiffVoltageValue[50][64]
+    for (int i = 0; i < 50; i++) {
+        for (int j = 0; j < 64; j++) {
+            data.matchTotalDiffVoltageValue[i][j] = (qint8)tableDiffVoltage->item(i, j)->text().toInt();
+        }
+    }
+
+    // matchExtraLineDACArray[64]
+    for (int i = 0; i < 64; i++) {
+        data.matchExtraLineDACArray[i] = (quint8)tableExtraLine->item(i, 0)->text().toUInt();
+    }
+
+    // matchFirstOnePointExtraLineDACArray[64]
+    for (int i = 0; i < 64; i++) {
+        data.matchFirstOnePointExtraLineDACArray[i] = (qint8)tableFirstOnePointExtra->item(i, 0)->text().toInt();
+    }
+
+    // matchAdjustParaDACArray[8]
+    for (int i = 0; i < 8; i++) {
+        data.matchAdjustParaDACArray[i] = (qint8)tableAdjustPara->item(i, 0)->text().toInt();
+    }
+
+    // matchGiantPointVoltageValue[16][64]
+    for (int i = 0; i < 16; i++) {
+        for (int j = 0; j < 64; j++) {
+            data.matchGiantPointVoltageValue[i][j] = (qint8)tableGiantPoint->item(i, j)->text().toInt();
+        }
+    }
+}
+
+// ========== 按钮槽函数 ==========
+
+void DlgVoltePara25Dots::onBtnLoadClicked()
+{
+    loadDataToUI();
+}
+
+void DlgVoltePara25Dots::onBtnSaveClicked()
+{
+    int ret = QMessageBox::question(this,
+        QString("确认"),
+        QString("确定要将修改后的充电参数写入FPGA吗？"),
+        QMessageBox::Yes | QMessageBox::No,
+        QMessageBox::No);
+
+    if (ret != QMessageBox::Yes)
+        return;
+
+    saveDataFromUI();
+
+    if (m_devOp) {
+        m_devOp->writeDacValue2Fpga_No72NewVoltData();
+    }
+
+    QMessageBox::information(this, QString("完成"), QString("充电参数已保存并推送至FPGA。"));
+}

DlgVoltePara25Dots.h

@@ -0,0 +1,70 @@
+#ifndef DLGVOLTEPARA25DOTS_H
+#define DLGVOLTEPARA25DOTS_H
+
+#include <QDialog>
+#include <QTabWidget>
+#include <QTableWidget>
+#include <QPushButton>
+#include <QVBoxLayout>
+#include <QHBoxLayout>
+#include <QLabel>
+#include <QMessageBox>
+#include "ParaSettingUI.h"
+
+class DevOp;
+
+class DlgVoltePara25Dots : public QDialog, public ParaSettingUI
+{
+    Q_OBJECT
+
+public:
+    explicit DlgVoltePara25Dots(DevOp *devOp, QWidget *parent = nullptr);
+    ~DlgVoltePara25Dots();
+
+public slots:
+    void onBtnLoadClicked();
+    void onBtnSaveClicked();
+
+private:
+    void setupUI();
+
+    // 创建各选项卡
+    QWidget* createTab_SingleDot();
+    QWidget* createTab_2Dots();
+    QWidget* createTab_3Dots();
+    QWidget* createTab_4Dots();
+    QWidget* createTab_5Dots();
+    QWidget* createTab_Continuous();
+    QWidget* createTab_DiffVoltage();
+    QWidget* createTab_ExtraLine();
+    QWidget* createTab_GiantPoint();
+
+    // 辅助方法
+    QTableWidget* createTable(int rows, int cols, int minVal, int maxVal);
+    void loadDataToUI();
+    void saveDataFromUI();
+
+    // UI 控件
+    QTabWidget *tabWidget;
+    QPushButton *btnLoad;
+    QPushButton *btnSave;
+
+    // DevOp 指针，用于调用 writeDacValue2Fpga_No72NewVoltData
+    DevOp *m_devOp;
+
+    // 各选项卡的表格指针
+    QTableWidget *tableSingleDot1;          // matchTotalTableDACArray1[64]
+    QTableWidget *tableSingleDotFirst1;     // matchTotalTableDACArrayFirst1[64]
+    QTableWidget *table2Dots;               // matchTotalTableDACArray2[64][2]
+    QTableWidget *table3Dots;               // matchTotalTableDACArray3[64][3]
+    QTableWidget *table4Dots;               // matchTotalTableDACArray4[64][4]
+    QTableWidget *table5Dots;               // matchTotalTableDACArray5[64][5]
+    QTableWidget *tableContinuous;          // matchContinousDACArray[64]
+    QTableWidget *tableDiffVoltage;         // matchTotalDiffVoltageValue[50][64]
+    QTableWidget *tableExtraLine;           // matchExtraLineDACArray[64]
+    QTableWidget *tableFirstOnePointExtra;  // matchFirstOnePointExtraLineDACArray[64]
+    QTableWidget *tableAdjustPara;          // matchAdjustParaDACArray[8]
+    QTableWidget *tableGiantPoint;          // matchGiantPointVoltageValue[16][64]
+};
+
+#endif // DLGVOLTEPARA25DOTS_H

InkJetPrinter.cpp

@@ -28,6 +28,7 @@ InkJetPrinter::InkJetPrinter(QWidget* parent)
 
     // 初始化业务逻辑（仅保留原init中的非UI创建部分）
     init();
+    initRunTimeCtrl();
 
     QThread::sleep(3);
     qApp->installEventFilter(this);
@@ -95,6 +96,7 @@ void InkJetPrinter::init()
     jd_timer->start(500);
 
     msgtest = new QMessageBox(this);
+    msgtest->setWindowTitle(tr("提示"));
     connect(msgtest, SIGNAL(finished(int)), this, SLOT(OnFinished(int)));
 
     // 信号槽连接（原逻辑完全不变）
@@ -278,35 +280,6 @@ void InkJetPrinter::init()
     connect(m_QRCodeDlg, &dlgQrCode::sig_qrCodeClose,
             m_TestPrintWidget, &TestPrintWidget::slt_QRCodeItemDone);
 
-#ifdef __RFID_CARD
-    curPowerOnDateTime = QDateTime::currentDateTime();
-    QDate curDate = QDate::currentDate();
-    unsigned int curDateInt = curDate.toString("yyMMdd").toInt();
-    if(sysPara->RFIDPara.maintenanceDate == 0){
-        sysPara->RFIDPara.maintenanceDate = curDateInt;
-        sysPara->RFIDPara.maintenanceInterval = 6;
-        QDate mtEndDate = curDate.addMonths(sysPara->RFIDPara.maintenanceInterval);
-        sysPara->RFIDPara.maintenanceEndDate = mtEndDate.toString("yyMMdd").toInt();
-    }
-    QString mtEndDatestr = "20" + QString::number(sysPara->RFIDPara.maintenanceEndDate);
-    QDate mtEndDate = QDate::fromString(mtEndDatestr,"yyyyMMdd");
-    timeoutDay = curDate.daysTo(mtEndDate);
-    LogInfo::setRunStatusText(tr("mtDate: %1").arg(sysPara->RFIDPara.maintenanceDate));
-    LogInfo::setRunStatusText(tr("mtInterval: %1").arg(sysPara->RFIDPara.maintenanceInterval));
-    LogInfo::setRunStatusText(tr("mtEndDate: %1").arg(sysPara->RFIDPara.maintenanceEndDate));
-    LogInfo::setRunStatusText(tr("mtFlag: %1").arg(sysPara->RFIDPara.needMaintenance));
-    LogInfo::setRunStatusText(tr("timeoutDay: %1").arg(timeoutDay));
-    qDebug()<<"mtDate: "<<sysPara->RFIDPara.maintenanceDate;
-    qDebug()<<"mtInterval: "<<sysPara->RFIDPara.maintenanceInterval;
-    qDebug()<<"mtEndDate: "<<sysPara->RFIDPara.maintenanceEndDate;
-    qDebug()<<"mtFlog: "<<sysPara->RFIDPara.needMaintenance;
-    qDebug()<<"timeoutDay: "<<timeoutDay;
-    if(timeoutDay <= 0 && !sysPara->RFIDPara.needMaintenance)
-        sysPara->RFIDPara.needMaintenance = true;
-    if(timeoutDay <= 30)
-        sysPara->status.needMaintenanceRemind = true;
-#endif
-
     sysPara->status.machineMac = m_MainInstruction->dlgInputAddr->jd.addr;
     sysPara->para.rfidCountDown = 5;
 }
@@ -354,6 +327,33 @@ void InkJetPrinter::slt_editCounter(CounterViewModel vm)
     }
 }
 
+void InkJetPrinter::slt_warningMaintenance()
+{
+    // 新逻辑的时间跨度更短，优先判断
+    if (timeoutDay >= 30) {
+        double runHours = sysPara->RFIDPara.runTime / 60.0 / 60.0;
+        double hours = sysPara->RFIDPara.maintenanceHours - runHours;
+        QString str;
+        if (hours >= 0) {
+            str = tr("保养期还有%1小时到期,请及时保养,否则喷码机容易损坏")
+                    .arg(QString::number(hours, 'f', 2));
+        } else {
+            hours = hours * (-1);
+            str = tr("保养期已超过%1小时,请及时保养,否则喷码机容易损坏")
+                    .arg(QString::number(hours, 'f', 2));
+        }
+        msgtest->setText(str);
+        msgtest->show();
+//        m_MainWidget->setRunStatus(str);
+        LogInfo::setRunStatusText(str);
+        return;
+    } else {
+        warningHandler(3);
+        return;
+    }
+
+}
+
 void InkJetPrinter::enableInkJetTabClick(bool flag){
     this->setEnabled(flag);
 }
@@ -681,7 +681,6 @@ void InkJetPrinter::timerHandler(void){
                 if(m_MainWidget->getCurrPrintStatus() != 1){
                     m_MainWidget->_on_pushButtonPowerOff_pressed(false);
                     LogInfo::setRunStatusText(tr("测试时间结束，准备关机"));
-//                    m_MainWidget->setRunStatus(tr("测试时间结束，准备关机")); hlp
                 }
             }
             if(sysPara->status.selfCheckDone && sysPara->para.Reciclar  && test_flag){
@@ -874,9 +873,8 @@ void InkJetPrinter::timerHandler(void){
             {
                 if(!sysPara->status.selfCheckDone && sysPara->status.isPrinting){
                     sysPara->status.selfCheckDone = true;
-//                    m_MainWidget->updatePrintDisplayLabel();hlp
+                    m_MainWidget->updatePrintDisplayLabel();
 //                    sysPara->status.flagOfAbnormalStatus = true;
-//                    LogInfo::setRunStatusText(tr("打印过程中死机了!!!"));
                     qDebug()<<"打印过程中死机了!!!";
                 }
                 if(!sysPara->status.selfCheckDone)
@@ -888,7 +886,7 @@ void InkJetPrinter::timerHandler(void){
                       }
                     /*-----------------------------------------------------*/
                     if(!sysPara->status.selfCheckCnt) {
-                        LogInfo::setRunStatusText(tr("开始自检,请等待60秒..............."));
+                        LogInfo::setRunStatusText(tr("开始自检,请等待60秒..."));
                         m_MainWidget->enableReclaimCtrlButton(false);
                         m_MainWidget->enablePrintButton(false);
                         sysPara->devOp->mainInkCtrl();
@@ -912,7 +910,6 @@ void InkJetPrinter::timerHandler(void){
                         LogInfo::setRunStatusText(tr("自检完成!!!"));
                         m_MainWidget->setRunStatus(tr("自检完成!!!"));
                         qDebug()<<"自检完成!!!";
-//                        ui->tabPrintSetting->PrintSettingLog();
                         m_MainWidget->enableReclaimCtrlButton(true);
                         sysPara->devOp->mainInkCtrl();
                         sysPara->status.canRunAirPushing = true;
@@ -922,7 +919,6 @@ void InkJetPrinter::timerHandler(void){
                     }
                     else {
                         if((sysPara->status.selfCheckCnt % 200) == 0)
-                            // sysPara->devOp->controlReclaimTankOpen(false);
                             m_MainWidget->enableReclaimCtrlButton(false);
                     }
 
@@ -1032,7 +1028,7 @@ void InkJetPrinter::timerHandler(void){
                                     sysPara->saveRFIDPara();
                                     msgtest->setText(tr("刷墨水卡成功!"));
                                     msgtest->show();
-    //                                        m_MainWidget->setRunStatus(tr("刷墨水卡成功!")); hlp
+                                            m_MainWidget->setRunStatus(tr("刷墨水卡成功!"));
                                     LogInfo::setRunStatusText(tr("刷墨水卡成功!"));
                                     qDebug()<<"刷墨水卡成功";
                                     sysPara->para.flagOfInkWarning = false;
@@ -1070,7 +1066,7 @@ void InkJetPrinter::timerHandler(void){
                                     sysPara->saveRFIDPara();
                                     msgtest->setText(tr("刷溶剂卡成功!"));
                                     msgtest->show();
-    //                                        m_MainWidget->setRunStatus(tr("刷溶剂卡成功!")); hlp
+                                            m_MainWidget->setRunStatus(tr("刷溶剂卡成功!"));
                                     LogInfo::setRunStatusText(tr("刷溶剂卡成功!"));
                                     qDebug()<<"刷溶剂卡成功";
                                     sysPara->para.flagOfSolventWarning = false;
@@ -1092,14 +1088,15 @@ void InkJetPrinter::timerHandler(void){
 
                                     sysPara->RFIDPara.needMaintenance = false;
                                     sysPara->status.needMaintenanceRemind = false;
+
                                     QDate curDate = QDate::currentDate();
                                     sysPara->RFIDPara.maintenanceDate = curDate.toString("yyMMdd").toInt();
                                     QDate mtEndDate = curDate.addMonths(sysPara->RFIDPara.maintenanceInterval);
                                     sysPara->RFIDPara.maintenanceEndDate = mtEndDate.toString("yyMMdd").toInt();
+                                    sysPara->RFIDPara.runTime = 0;
+                                    ctrl_runTime->updatePara(&sysPara->RFIDPara);
                                     sysPara->saveRFIDPara();
-                                    // msgtest->setText(tr("刷保养卡成功!"));
-                                    // msgtest->show();
-//                                    m_MainWidget->setRunStatus(tr("刷保养卡成功!")); hlp
+                                    m_MainWidget->setRunStatus(tr("刷保养卡成功!"));
                                     LogInfo::setRunStatusText(tr("刷保养卡成功!"));
                                     qDebug()<<"刷保养卡成功";
                                 }
@@ -1121,7 +1118,7 @@ void InkJetPrinter::timerHandler(void){
                     }
                     else
                     {
-                        LogInfo::setRunStatusText(tr("card data: %1").arg(sysPara->devOp->strRevdata));
+//                        LogInfo::setRunStatusText(tr("card data: %1").arg(sysPara->devOp->strRevdata));
                         QString str1 = QString::number(sysPara->devOp->strRevdata.mid(0,2).toInt(0,16)).rightJustified(2,'0');
                         QString str2 =QString::number(sysPara->devOp->strRevdata.mid(2,2).toInt(0,16)).rightJustified(2,'0');
                         QString str3 = QString::number(sysPara->devOp->strRevdata.mid(4,2).toInt(0,16)).rightJustified(2,'0');
@@ -1253,8 +1250,9 @@ void InkJetPrinter::timerHandler(void){
             }
 
 #ifdef __RFID_CARD
+            // hlp 0513 :甲方要求提示越来越频繁
             if(sysPara->status.needMaintenanceRemind){
-                warningHandler(3);
+//                warningHandler(3);
             }
             static bool logFlagCard1 = 1;
             if(!sysPara->para.flagOfInkWarning){
@@ -1379,7 +1377,7 @@ void InkJetPrinter::timerHandler(void){
                 sysPara->status.beeperOnFlag = true;
                 if(sysPara->status.gearPumpRunStopFlag && pushButtonStartFlag)
                 {
-//                    m_MainWidget->setRunStatus(tr("压力泄漏或压力传感器故障!")); hlp
+                    m_MainWidget->setRunStatus(tr("压力泄漏或压力传感器故障!"));
                 }
                 if(!resumeFlag)
                 {
@@ -1839,16 +1837,16 @@ void InkJetPrinter::slt_counterVarUpdate()
     // m_TestPrintWidget->onEditItemCounterDone();
 }
 
-void InkJetPrinter::showScheduleShiftsEditor(PicScheduleShiftItem* item)
+void InkJetPrinter::showScheduleShiftsEditor(QVector<ScheduleModel> schedules, TextItemModel txtModel)
 {
     m_StackedWidget->setCurrentWidget(m_scheduleShiftsEditor);
-    m_scheduleShiftsEditor->edit(item);
+    m_scheduleShiftsEditor->setItemModel(schedules, txtModel);
 }
 
 void InkJetPrinter::onScheduleShiftsEditDone()
 {
     m_StackedWidget->setCurrentWidget(m_TestPrintWidget);
-    m_TestPrintWidget->addScheduleShiftsItem(m_scheduleShiftsEditor->dataModel());
+    m_TestPrintWidget->addScheduleShiftsItem(m_scheduleShiftsEditor->scheduleModel(), m_scheduleShiftsEditor->textItemModel());
 }
 
 bool InkJetPrinter::eventFilter(QObject *watched, QEvent *event)
@@ -1897,7 +1895,7 @@ void InkJetPrinter::saveFPGAStatus(unsigned char *data){
     }
     if(sysPara->status.dummy != sysPara->status.isPrinting){
         sysPara->status.isPrinting = sysPara->status.dummy;
-//        m_MainWidget->updatePrintDisplayLabel(); hlp
+        m_MainWidget->updatePrintDisplayLabel();
     }
 }
 
@@ -2500,21 +2498,15 @@ void InkJetPrinter::detectAndcontrolReclaimTank(){
     sysPara->status.reclaimTankBlockedAppending =0;
     if(sysPara->status.reclaimTankstatus == 0x10) //7 故障，6 关完成，5开完成，4 保持， 3 停止， 2 关， 1 开，0-无操作
     {
+        LogInfo::setRunStatusText(tr("电机故障"));
+        m_MainWidget->setRunStatus(tr("电机故障"));
         if(sysPara->devOp->isReclaimTankCloseEnable())
         {
-            LogInfo::setRunStatusText(tr("电机故障"));
-//            m_MainWidget->setRunStatus(tr("电机故障")); hlp
             sysPara->devOp->controlReclaimTankClose(false);
-//            ui->tabMainWindow->resetReclaimCtrlButtonText();
-//            emit reclaimTankBlock();
         }
         else {
-            LogInfo::setRunStatusText(tr("电机故障"));
-//            m_MainWidget->setRunStatus(tr("电机故障!!!")); hlp
             if(sysPara->devOp->isReclaimTankOpenEnable())
                 sysPara->devOp->controlReclaimTankOpen(false);
-//            ui->tabMainWindow->resetReclaimCtrlButtonText();
-//            emit reclaimTankBlock();
         }
 
     }
@@ -2523,10 +2515,9 @@ void InkJetPrinter::detectAndcontrolReclaimTank(){
         if(sysPara->devOp->isReclaimTankOpenEnable())
             sysPara->devOp->controlReclaimTankOpen(false);		//到头，关闭
         sysPara->status.reclainTankReachEnd = true;
-        /*应要求去掉多余到信息 LogInfo::setRunStatusText(tr("回收槽到头"));*/
-        m_MainWidget->setRunStatus(tr("回收槽到头"));
+//        m_MainWidget->setRunStatus(tr("回收槽到头"));
+        m_MainWidget->setReclaimStatus(true, 100);
         m_MainWidget->enablePrintButton(true);			//仅仅在此时能使能打印按钮  
-//        ui->tabMainWindow->resetReclaimCtrlButtonText();
         sysPara->devOp->highVoltageCtrl(1);
 //        emit reclaimTankOpenDone();
         /*回收槽开关时间校正*/
@@ -2539,14 +2530,10 @@ void InkJetPrinter::detectAndcontrolReclaimTank(){
     else  if(sysPara->status.reclaimTankstatus == 0x11 )//7 故障，6 关完成，5开完成，4 保持， 3 停止， 2 关， 1 开，0-无操作
     {
         sysPara->devOp->controlReclaimTankOpen(false);		//卡住，关闭
-//        ui->tabMainWindow->resetReclaimCtrlButtonText();
-//        LogInfo::setRunStatusText(tr("回收槽卡住或者回收槽开关时间设置错误"));
 //        ui->tabMainWindow->setRunStatus(tr("回收槽卡住或者回收槽开关时间设置错误"));
-//        emit reclaimTankBlock();
     }
     else  if(sysPara->status.reclaimTankstatus == 1 || sysPara->status.reclaimTankstatus == 2)//7 故障，6 关完成，5开完成，4 保持， 3 停止， 2 关， 1 开，0-无操作
     {
-//        emit setReclaimTankCurrentPos(sysPara->status.currReclaimTankPos);
         sysPara->status.reclaimBlockedCnt = 0;
 
     }
@@ -2554,10 +2541,8 @@ void InkJetPrinter::detectAndcontrolReclaimTank(){
     {
         if(sysPara->devOp->isReclaimTankCloseEnable())
             sysPara->devOp->controlReclaimTankClose(false);		//到头，关闭
-        /*应要求去掉多余到信息 LogInfo::setRunStatusText(tr("回收槽到头"));*/
-        m_MainWidget->setRunStatus(tr("回收槽到头"));
+        m_MainWidget->setReclaimStatus(false, 0);
         //sysPara->status.currReclaimTankPos = 0;				//将回收槽的时间置为零
-//        ui->tabMainWindow->resetReclaimCtrlButtonText();
 //        emit reclaimTankCloseDone();
         sysPara->status.lastRecycleWarn = 0;
         sysPara->status.HVFaultCloseEn=0;
@@ -2572,13 +2557,7 @@ void InkJetPrinter::detectAndcontrolReclaimTank(){
     {
         sysPara->devOp->controlReclaimTankOpen(false);		//到头，关闭
         LogInfo::setRunStatusText(tr("回收槽卡住或者回收槽开关时间设置错误"));
-//        m_MainWidget->setRunStatus(tr("回收槽卡住或者回收槽开关时间设置错误")); hlp
-//        ui->tabMainWindow->resetReclaimCtrlButtonText();
-//        emit reclaimTankBlock();
-    }
-    else // if(sysPara->status.reclaimTankstatus == 7 )//7 故障，6 关完成，5开完成，4 保持， 3 停止， 2 关， 1 开，0-无操作
-    {
-//        emit setReclaimTankCurrentPos(sysPara->status.currReclaimTankPos);
+        m_MainWidget->setRunStatus(tr("回收槽卡住或者回收槽开关时间设置错误"));
     }
 }
 
@@ -2627,7 +2606,7 @@ void InkJetPrinter::showMessage(QString str){
         qDebug()<<str;
     }
     sysPara->devOp->color_flag = 2;
-//    m_MainWidget->setRunStatus(str); hlp
+    m_MainWidget->setRunStatus(str);
 }
 
 void InkJetPrinter::resetPressureCnt(){
@@ -2739,7 +2718,7 @@ void InkJetPrinter::warningShow(int type,int num){
             str = tr("墨水液位报警超过48小时,机器无法正常打印,请先添加原厂墨水再刷墨水卡,以恢复喷码机的正常工作!");
         msgtest->setText(str);
         msgtest->show();
-//        m_MainWidget->setRunStatus(str); hlp
+//        m_MainWidget->setRunStatus(str);
         LogInfo::setRunStatusText(str);
         qDebug()<<str;
     }
@@ -2750,7 +2729,7 @@ void InkJetPrinter::warningShow(int type,int num){
             str = tr("溶剂液位报警超过48小时,机器无法正常打印,请先添加溶剂再刷溶剂卡以恢复喷码机的正常工作!");
         msgtest->setText(str);
         msgtest->show();
-//        m_MainWidget->setRunStatus(str); hlp
+//        m_MainWidget->setRunStatus(str);
         LogInfo::setRunStatusText(str);
         qDebug()<<str;
     }
@@ -2761,7 +2740,7 @@ void InkJetPrinter::warningShow(int type,int num){
             str = tr("保养期已超过%1天,请进行保养以恢复喷码机的正常使用").arg(num*(-1));
         msgtest->setText(str);
         msgtest->show();
-//        m_MainWidget->setRunStatus(str); hlp
+//        m_MainWidget->setRunStatus(str);
         LogInfo::setRunStatusText(str);
         qDebug()<<str;
     }
@@ -2799,7 +2778,7 @@ bool InkJetPrinter::cardTouchConfirm(QString msgTxt, QString variableMsgTxt)
 {
     QMessageBox box(QMessageBox::Warning, tr("警告"), 
             msgTxt, QMessageBox::Ok | QMessageBox::Cancel,
-            this, Qt::Dialog | Qt::Tool | Qt::FramelessWindowHint | Qt::BypassWindowManagerHint );
+            this);
 
     int rfidCountDown = sysPara->para.rfidCountDown;
     QTimer msgTimer;
@@ -2818,15 +2797,36 @@ bool InkJetPrinter::cardTouchConfirm(QString msgTxt, QString variableMsgTxt)
         msgTimer.start(1000);
     }
 
-    // 为边框设置圆角和边框颜色
-    box.setStyleSheet(R"(
-        QDialog {
-            border-radius: 5px;
-            border: 2px solid #333333;
-        }
-    )");
-
     box.exec();
 
     return box.result() == QMessageBox::Ok || box.result() == QMessageBox::Accepted;
 }
+
+void InkJetPrinter::initRunTimeCtrl()
+{
+    if (ctrl_runTime == nullptr) {
+        ctrl_runTime = RunTimeCtrl::instance();
+#ifdef __RFID_CARD
+        connect(ctrl_runTime, &RunTimeCtrl::sig_updateTimeoutDay, this, [=](int days) {
+            // timeoutDay：仅适用于原来月份的处理
+            this->timeoutDay = days;
+            if(timeoutDay <= 30)
+                sysPara->status.needMaintenanceRemind = true;
+        });
+        connect(ctrl_runTime, &RunTimeCtrl::sig_saveRunTime, this, [=]() {
+            // 运行时间处理
+            sysPara->RFIDPara.runTime += 30;
+            sysPara->saveRFIDPara();
+        });
+        // 弹窗提示
+        connect(ctrl_runTime, &RunTimeCtrl::sig_alertTimeout,
+                this, &InkJetPrinter::slt_warningMaintenance);
+
+        curPowerOnDateTime = QDateTime::currentDateTime();
+        if (sysPara)
+            ctrl_runTime->loadConfig(&sysPara->RFIDPara);
+
+        ctrl_runTime->start();
+#endif
+    }
+}

InkJetPrinter.h

@@ -33,6 +33,8 @@
 #include "QBarCode.h"
 #include "dlgQrCode.h"
 
+#include "runtimectrl.h"
+
 class InkJetPrinter : public QWidget,public ParaSettingUI
 {
     Q_OBJECT
@@ -108,6 +110,8 @@ private:
     QDateTime curPowerOnDateTime;
     int timeoutDay;
 
+    RunTimeCtrl* ctrl_runTime = nullptr;
+    void initRunTimeCtrl();
 private slots:
     void timerHandler();
     void getMainWidgetButtonClickedSlot(int index);
@@ -129,7 +133,7 @@ private slots:
     void getCounterVarSetWidgetButtonClickSlot(int index);
     void slt_counterVarUpdate();
 
-    void showScheduleShiftsEditor(PicScheduleShiftItem* item);
+    void showScheduleShiftsEditor(QVector<ScheduleModel> schedules, TextItemModel txtModel);
 
     void onScheduleShiftsEditDone();
 
@@ -165,9 +169,8 @@ private slots:
 
     void slt_editCounter(CounterViewModel vm);
 
-    //复制粘贴
-//    void slt_copy();
-
+    // 保养警告
+    void slt_warningMaintenance();
 signals:
        void maintenanceShow();
 

LogInfo.cpp

@@ -27,7 +27,6 @@ LogInfo::LogInfo(QWidget *parent) :
     textEdit = ui->textEditRunStatus;
     textEdit->verticalScrollBar()->setStyleSheet("QScrollBar:vertical { width: 40px; }");
     textEdit2 = ui->textEditRunStatus_2;
-    //textEdit2->verticalScrollBar()->setStyleSheet("QScrollBar:vertical { width: 40px; }");
     textEdit2->verticalScrollBar()->setStyleSheet("QScrollBar:vertical { width: 40px; }");
 
 
@@ -35,8 +34,6 @@ LogInfo::LogInfo(QWidget *parent) :
     runStatusTextIndex = 0;
     openFileName ="";
     ui->labelPreFileName->setText("");
-    //currenDate="";
-    //r_CurrentDate=QDate::currentDate().toString("yyyyMMdd");
 
     textEdit2->append(tr("请先打开历史状态文件!"));
     if(!QDir("/home/plg").exists())
@@ -182,6 +179,10 @@ void LogInfo::setRunStatusText(QString str){
         }
         truncatelog();
     }
+
+    textEdit->moveCursor(QTextCursor::End);
+
+    qInfo() << "RunStatusText:"<< str;
 }
 
 QString LogInfo::getRunStatusText(void){

MainInstruction.cpp

@@ -3,6 +3,7 @@
 #include <QMessageBox>
 #include <QDebug>
 #include "DlgRFIDConfig.h"
+#include "runtimectrl.h"
 
 MainInstruction::MainInstruction(QWidget *parent) :
     QWidget(parent),
@@ -38,9 +39,21 @@ MainInstruction::MainInstruction(QWidget *parent) :
 
     MTimeSetting = new DialogMaintenanceTimeSetting(this);
     connect(MTimeSetting,SIGNAL(accepted()),this,SLOT(onMTimeSettingAccepted()));
+    //30s刷新一次总运行时间
+    connect(RunTimeCtrl::instance(), &RunTimeCtrl::sig_saveRunTime
+            , this, [=]() {
+        if (sysPara)
+            MTimeSetting->updateUI(sysPara->RFIDPara);
+    });
 
 
     applyStyleSheet();
+
+    // 授权
+    ui->tabWidget->removeTab(2);
+
+    timeDia.hide();
+    connect(&timeDia,SIGNAL(accepted()),this,SLOT(slt_timeSetting()));
 }
 
 MainInstruction::~MainInstruction()
@@ -82,51 +95,24 @@ void MainInstruction::on_maintenanceIntervalBtn_clicked()
 }
 
 
-void MainInstruction::onDlgAuthMaintenanceTimeAccepted(){
-    //    QString authString= dialogMaintenanceTimeSettingAuth->getAuth();
-    //    if(dlgInputAddr->checWhJmDate(authString)) // 0xa001
-    //    {
-    QDate curDate = QDate::currentDate();
-    QString mtEndDatestr = "20" + QString::number(sysPara->RFIDPara.maintenanceEndDate);
-    QDate mtEndDate = QDate::fromString(mtEndDatestr,"yyyyMMdd");
-    int timeoutDay = curDate.daysTo(mtEndDate);
-    MTimeSetting->updateMaintenanceTime(QString("%1 Days").arg(timeoutDay));
-    MTimeSetting->updateMaintenanceIntervalToUI(sysPara->RFIDPara.maintenanceInterval);
+void MainInstruction::onDlgAuthMaintenanceTimeAccepted()
+{
+    MTimeSetting->updateUI(sysPara->RFIDPara);
     MTimeSetting->disableMaintenanceTimeSet(false);
     MTimeSetting->show();
-    //    }else
-    //    {
-    //        QMessageBox::about(this, tr("提示"), tr("密码不正确！"));
-    //        return;
-    //    }
 }
 
-void MainInstruction::maintenanceDialogShow(){
-    QDate curDate = QDate::currentDate();
-    QString mtEndDatestr = "20" + QString::number(sysPara->RFIDPara.maintenanceEndDate);
-    QDate mtEndDate = QDate::fromString(mtEndDatestr,"yyyyMMdd");
-    int timeoutDay = curDate.daysTo(mtEndDate);
-    MTimeSetting->updateMaintenanceTime(QString("%1 Days").arg(timeoutDay));
-    MTimeSetting->updateMaintenanceIntervalToUI(sysPara->RFIDPara.maintenanceInterval);
+void MainInstruction::maintenanceDialogShow()
+{
+    MTimeSetting->updateUI(sysPara->RFIDPara);
+    RunTimeCtrl::instance()->updatePara(&sysPara->RFIDPara);
     MTimeSetting->disableMaintenanceTimeSet(true);
     MTimeSetting->show();
 }
 
 void MainInstruction::onMTimeSettingAccepted(){
-    sysPara->RFIDPara.maintenanceInterval = MTimeSetting->getInterval();
-    if(MTimeSetting->getResetSchedule()){
-        QDate curDate = QDate::currentDate();
-        int curdate = curDate.toString("yyMMdd").toInt();
-        sysPara->RFIDPara.maintenanceDate = curdate;
-    }
-    QString mtDatestr = QString::number(sysPara->RFIDPara.maintenanceDate);
-    QDate mtDate = QDate::fromString(mtDatestr,"yyMMdd");
-    QDate mtEndDate = mtDate.addMonths(sysPara->RFIDPara.maintenanceInterval);
-    sysPara->RFIDPara.maintenanceEndDate = mtEndDate.toString("yyMMdd").toInt();
-    LogInfo::setRunStatusText(tr("mtDate1: %1").arg(sysPara->RFIDPara.maintenanceDate));
-    LogInfo::setRunStatusText(tr("mtInterval1: %1").arg(sysPara->RFIDPara.maintenanceInterval));
-    LogInfo::setRunStatusText(tr("mtEndDate1: %1").arg(sysPara->RFIDPara.maintenanceEndDate));
-    LogInfo::setRunStatusText(tr("mtFlog1: %1").arg(sysPara->RFIDPara.needMaintenance));
+    MTimeSetting->getInterval(&sysPara->RFIDPara);
+    RunTimeCtrl::instance()->updatePara(&sysPara->RFIDPara);
     sysPara->saveRFIDPara();
 }
 
@@ -137,22 +123,12 @@ void MainInstruction::ondialogAuthorizationAccepted(){
     if((authString.left(4) == "nnyp") && ( dlgInputAddr->checkSupperJm(authString.mid(4))))
     {
 #ifdef __RFID_CARD
-        /**********超级密码，除了维护时间的3个参数，其他参数清零*****************/
-        unsigned int mtDate = sysPara->RFIDPara.maintenanceDate;
-        unsigned int mtInterval = sysPara->RFIDPara.maintenanceInterval;
-        unsigned int mtEndDate = sysPara->RFIDPara.maintenanceEndDate;
-        qDebug()<<"mtDate2: "<<sysPara->RFIDPara.maintenanceDate;
-        qDebug()<<"mtInterval2: "<<sysPara->RFIDPara.maintenanceInterval;
-        qDebug()<<"mtEndDate2: "<<sysPara->RFIDPara.maintenanceEndDate;
+        /**********超级密码，除了维护时间的5个参数，其他参数清零*****************/
         memset(&sysPara->RFIDPara,0,sizeof(sysPara->RFIDPara));
-        sysPara->RFIDPara.maintenanceDate = mtDate;
-        sysPara->RFIDPara.maintenanceInterval = mtInterval;
-        sysPara->RFIDPara.maintenanceEndDate = mtEndDate;
-        qDebug()<<"mtDate3: "<<sysPara->RFIDPara.maintenanceDate;
-        qDebug()<<"mtInterval3: "<<sysPara->RFIDPara.maintenanceInterval;
-        qDebug()<<"mtEndDate3: "<<sysPara->RFIDPara.maintenanceEndDate;
+        RunTimeCtrl::instance()->authorizationAccepted(&sysPara->RFIDPara);
         sysPara->saveRFIDPara();
         QMessageBox::warning(0,tr("提示"),tr("RFID卡清零!") );
+
         sysPara->para.flagOfInkWarning = false;
         sysPara->para.flagOfSolventWarning = false;
         sysPara->status.needMaintenanceRemind = false;
@@ -170,11 +146,25 @@ void MainInstruction::ondialogAuthorizationAccepted(){
         dlgInputAddr->show();
         //   ui->labMac->setText(QString("Mac:%1").arg(dlgInputAddr->jd.addr));
     }
-
+    else if(authString == "nnyp") {
+        ui->tabWidget->addTab(ui->tabExtra, tr("额外设置"));
+        ui->pushButtonAuth->setText(tr("取消授权"));
+    } else {
+        QMessageBox box(QMessageBox::Warning, tr("警告"),
+                tr("密码错误:%1").arg(authString), QMessageBox::Ok,
+                this);
+        box.exec();
+    }
 }
 
 void MainInstruction::on_pushButtonAuth_clicked()
 {
+    if (ui->pushButtonAuth->text() == tr("取消授权")) {
+        ui->pushButtonAuth->setText(tr("系统授权"));
+        int index = ui->tabWidget->indexOf(ui->tabExtra);
+        ui->tabWidget->removeTab(index);
+        return;
+    }
     dialogAuthorization->clearAuth();
     dialogAuthorization->show();
 }
@@ -190,9 +180,7 @@ void MainInstruction::on_btn_time_clicked()
     timeDia.setHour(tm.hour());
     timeDia.setMinute(tm.minute());
     timeDia.setSecond(tm.second());
-    timeDia.hide();
     timeDia.show();
-    connect(&timeDia,SIGNAL(accepted()),this,SLOT(slt_timeSetting()));
 }
 
 #include <time.h>

MainInstruction.ui

@@ -100,16 +100,31 @@
    <property name="currentIndex">
     <number>0</number>
    </property>
-   <widget class="QWidget" name="tabExtra">
+   <widget class="QWidget" name="tabBasic">
     <attribute name="title">
      <string>基本设置</string>
     </attribute>
     <layout class="QGridLayout" name="gridLayout_2">
+     <property name="leftMargin">
+      <number>30</number>
+     </property>
+     <property name="topMargin">
+      <number>30</number>
+     </property>
+     <property name="rightMargin">
+      <number>30</number>
+     </property>
+     <property name="bottomMargin">
+      <number>30</number>
+     </property>
+     <property name="spacing">
+      <number>30</number>
+     </property>
      <item row="0" column="0">
       <widget class="QPushButton" name="graphicsEditorBtn">
        <property name="maximumSize">
         <size>
-         <width>253</width>
+         <width>254</width>
          <height>92</height>
         </size>
        </property>
@@ -128,7 +143,7 @@
       <widget class="QPushButton" name="btn_time">
        <property name="maximumSize">
         <size>
-         <width>253</width>
+         <width>254</width>
          <height>92</height>
         </size>
        </property>
@@ -147,7 +162,7 @@
       <widget class="QPushButton" name="btn_network">
        <property name="maximumSize">
         <size>
-         <width>253</width>
+         <width>254</width>
          <height>92</height>
         </size>
        </property>
@@ -233,17 +248,17 @@
      </item>
     </layout>
    </widget>
-   <widget class="QWidget" name="tab">
+   <widget class="QWidget" name="tabExtra">
     <attribute name="title">
      <string>额外设置</string>
     </attribute>
     <widget class="QPushButton" name="rfidCfgBtn">
      <property name="geometry">
       <rect>
-       <x>40</x>
-       <y>30</y>
-       <width>161</width>
-       <height>61</height>
+       <x>30</x>
+       <y>70</y>
+       <width>254</width>
+       <height>92</height>
       </rect>
      </property>
      <property name="text">
@@ -253,10 +268,10 @@
     <widget class="QPushButton" name="otherSetBtn">
      <property name="geometry">
       <rect>
-       <x>40</x>
-       <y>120</y>
-       <width>161</width>
-       <height>61</height>
+       <x>30</x>
+       <y>230</y>
+       <width>254</width>
+       <height>92</height>
       </rect>
      </property>
      <property name="text">

MainWidget.ui

@@ -7,7 +7,7 @@
     <x>0</x>
     <y>0</y>
     <width>800</width>
-    <height>550</height>
+    <height>558</height>
    </rect>
   </property>
   <property name="sizePolicy">
@@ -211,7 +211,7 @@
           <height>300</height>
          </size>
         </property>
-        <layout class="QHBoxLayout" name="horizontalLayout" stretch="0,0">
+        <layout class="QHBoxLayout" name="horizontalLayout" stretch="1,0">
          <property name="leftMargin">
           <number>9</number>
          </property>
@@ -230,146 +230,22 @@
             </size>
            </property>
            <layout class="QGridLayout" name="gridLayout">
-            <item row="0" column="0">
-             <widget class="QFrame" name="fra_state">
-              <property name="maximumSize">
-               <size>
-                <width>180</width>
-                <height>140</height>
-               </size>
-              </property>
-              <property name="frameShape">
-               <enum>QFrame::NoFrame</enum>
-              </property>
-              <property name="frameShadow">
-               <enum>QFrame::Plain</enum>
-              </property>
-              <layout class="QVBoxLayout" name="verticalLayout_6">
-               <item>
-                <widget class="QLabel" name="lb_generalState">
-                 <property name="minimumSize">
-                  <size>
-                   <width>0</width>
-                   <height>50</height>
-                  </size>
-                 </property>
-                 <property name="text">
-                  <string/>
-                 </property>
-                 <property name="alignment">
-                  <set>Qt::AlignCenter</set>
-                 </property>
-                </widget>
-               </item>
-              </layout>
-             </widget>
-            </item>
-            <item row="0" column="1">
-             <widget class="QFrame" name="sub3">
-              <property name="minimumSize">
-               <size>
-                <width>200</width>
-                <height>140</height>
-               </size>
-              </property>
-              <property name="maximumSize">
-               <size>
-                <width>200</width>
-                <height>140</height>
-               </size>
-              </property>
-              <property name="styleSheet">
-               <string>background-color:#BBBBBD;border-radius:3px;</string>
-              </property>
-              <layout class="QVBoxLayout" name="verticalLayout_4">
-               <item>
-                <widget class="QLabel" name="sub3_lb1">
-                 <property name="styleSheet">
-                  <string notr="true">color:#000000;font-size:18px;</string>
-                 </property>
-                 <property name="text">
-                  <string>产品计数器</string>
-                 </property>
-                 <property name="alignment">
-                  <set>Qt::AlignLeading|Qt::AlignLeft|Qt::AlignVCenter</set>
-                 </property>
-                 <property name="indent">
-                  <number>-1</number>
-                 </property>
-                </widget>
-               </item>
-               <item>
-                <widget class="QLabel" name="labelProductCnt">
-                 <property name="font">
-                  <font>
-                   <pointsize>-1</pointsize>
-                   <weight>75</weight>
-                   <bold>true</bold>
-                  </font>
-                 </property>
-                 <property name="styleSheet">
-                  <string notr="true">color:#000000;font-size:28px;font-weight:bold;</string>
-                 </property>
-                 <property name="text">
-                  <string>0</string>
-                 </property>
-                 <property name="alignment">
-                  <set>Qt::AlignCenter</set>
-                 </property>
-                </widget>
-               </item>
-               <item>
-                <widget class="QLabel" name="lb_counter">
-                 <property name="text">
-                  <string>达到数量后停止:</string>
-                 </property>
-                </widget>
-               </item>
-               <item>
-                <widget class="QLabel" name="labelTotalProductCnt">
-                 <property name="styleSheet">
-                  <string>color:#000000;font-size:28px;font-weight:bold;</string>
-                 </property>
-                 <property name="text">
-                  <string>0</string>
-                 </property>
-                 <property name="alignment">
-                  <set>Qt::AlignRight</set>
-                 </property>
-                </widget>
-               </item>
-               <item>
-                <spacer name="verticalSpacer_6">
-                 <property name="orientation">
-                  <enum>Qt::Vertical</enum>
-                 </property>
-                 <property name="sizeHint" stdset="0">
-                  <size>
-                   <width>20</width>
-                   <height>40</height>
-                  </size>
-                 </property>
-                </spacer>
-               </item>
-              </layout>
-             </widget>
-            </item>
             <item row="0" column="2">
              <widget class="QPushButton" name="m_StartBtn">
               <property name="minimumSize">
                <size>
                 <width>150</width>
-                <height>140</height>
+                <height>130</height>
                </size>
               </property>
               <property name="maximumSize">
                <size>
                 <width>150</width>
-                <height>140</height>
+                <height>130</height>
                </size>
               </property>
               <property name="styleSheet">
-               <string notr="true">border:0px;</string>
+               <string notr="true"/>
               </property>
               <property name="text">
                <string>开始打印</string>
@@ -388,36 +264,7 @@
               </property>
              </widget>
             </item>
-            <item row="1" column="0">
-             <widget class="QPushButton" name="m_CloseBtn">
-              <property name="minimumSize">
-               <size>
-                <width>0</width>
-                <height>130</height>
-               </size>
-              </property>
-              <property name="styleSheet">
-               <string>border:0px;</string>
-              </property>
-              <property name="icon">
-               <iconset resource="image.qrc">
-                <normaloff>:/image/power.png</normaloff>:/image/power.png</iconset>
-              </property>
-              <property name="iconSize">
-               <size>
-                <width>70</width>
-                <height>70</height>
-               </size>
-              </property>
-              <property name="fixedSize" stdset="0">
-               <size>
-                <width>70</width>
-                <height>70</height>
-               </size>
-              </property>
-             </widget>
-            </item>
-            <item row="1" column="1">
+            <item row="2" column="1">
              <widget class="QFrame" name="sub2">
               <property name="maximumSize">
                <size>
@@ -561,16 +408,22 @@
               </layout>
              </widget>
             </item>
-            <item row="1" column="2">
+            <item row="2" column="2">
              <widget class="QPushButton" name="m_StopBtn">
               <property name="minimumSize">
                <size>
                 <width>0</width>
-                <height>140</height>
+                <height>130</height>
+               </size>
+              </property>
+              <property name="maximumSize">
+               <size>
+                <width>16777215</width>
+                <height>130</height>
                </size>
               </property>
               <property name="styleSheet">
-               <string notr="true">border:0px;</string>
+               <string notr="true"/>
               </property>
               <property name="text">
                <string>停止打印</string>
@@ -589,47 +442,160 @@
               </property>
              </widget>
             </item>
-           </layout>
-          </widget>
-         </item>
-         <item alignment="Qt::AlignRight">
-          <widget class="QWidget" name="rightPanel" native="true">
-           <layout class="QVBoxLayout" name="verticalLayout_2" stretch="1,0,0">
-            <property name="spacing">
-             <number>5</number>
+            <item row="0" column="1">
+             <widget class="QFrame" name="sub3">
+              <property name="minimumSize">
+               <size>
+                <width>200</width>
+                <height>150</height>
+               </size>
               </property>
-            <property name="leftMargin">
-             <number>1</number>
-            </property>
-            <item>
-             <widget class="QFrame" name="frame_2">
-              <property name="frameShape">
-               <enum>QFrame::NoFrame</enum>
-              </property>
-              <property name="frameShadow">
-               <enum>QFrame::Plain</enum>
-              </property>
-              <layout class="QVBoxLayout" name="verticalLayout_5" stretch="1,0">
-               <item>
-                <widget class="QLabel" name="lb_reclaimtanl">
               <property name="maximumSize">
                <size>
                 <width>200</width>
                 <height>150</height>
                </size>
               </property>
+              <property name="styleSheet">
+               <string>background-color:#BBBBBD;border-radius:3px;</string>
+              </property>
+              <layout class="QVBoxLayout" name="verticalLayout_4">
+               <item>
+                <widget class="QLabel" name="sub3_lb1">
+                 <property name="styleSheet">
+                  <string notr="true">color:#000000;font-size:18px;</string>
+                 </property>
                  <property name="text">
-                  <string/>
+                  <string>产品计数器</string>
                  </property>
-                 <property name="pixmap">
-                  <pixmap resource="image.qrc">:/image/tool.png</pixmap>
+                 <property name="alignment">
+                  <set>Qt::AlignLeading|Qt::AlignLeft|Qt::AlignVCenter</set>
                  </property>
-                 <property name="scaledContents">
-                  <bool>true</bool>
+                 <property name="indent">
+                  <number>-1</number>
                  </property>
                 </widget>
                </item>
                <item>
+                <widget class="QLabel" name="labelProductCnt">
+                 <property name="font">
+                  <font>
+                   <pointsize>-1</pointsize>
+                   <weight>75</weight>
+                   <bold>true</bold>
+                  </font>
+                 </property>
+                 <property name="styleSheet">
+                  <string notr="true">color:#000000;font-size:28px;font-weight:bold;</string>
+                 </property>
+                 <property name="text">
+                  <string>0</string>
+                 </property>
+                 <property name="alignment">
+                  <set>Qt::AlignCenter</set>
+                 </property>
+                </widget>
+               </item>
+               <item>
+                <widget class="QLabel" name="lb_counter">
+                 <property name="text">
+                  <string>达到数量后停止:</string>
+                 </property>
+                </widget>
+               </item>
+               <item>
+                <widget class="QLabel" name="labelTotalProductCnt">
+                 <property name="styleSheet">
+                  <string>color:#000000;font-size:28px;font-weight:bold;</string>
+                 </property>
+                 <property name="text">
+                  <string>0</string>
+                 </property>
+                 <property name="alignment">
+                  <set>Qt::AlignRight</set>
+                 </property>
+                </widget>
+               </item>
+               <item>
+                <spacer name="verticalSpacer_6">
+                 <property name="orientation">
+                  <enum>Qt::Vertical</enum>
+                 </property>
+                 <property name="sizeHint" stdset="0">
+                  <size>
+                   <width>20</width>
+                   <height>40</height>
+                  </size>
+                 </property>
+                </spacer>
+               </item>
+              </layout>
+             </widget>
+            </item>
+            <item row="2" column="0">
+             <widget class="QPushButton" name="m_CloseBtn">
+              <property name="minimumSize">
+               <size>
+                <width>0</width>
+                <height>130</height>
+               </size>
+              </property>
+              <property name="styleSheet">
+               <string>border:0px;</string>
+              </property>
+              <property name="icon">
+               <iconset resource="image.qrc">
+                <normaloff>:/image/power.png</normaloff>:/image/power.png</iconset>
+              </property>
+              <property name="iconSize">
+               <size>
+                <width>70</width>
+                <height>70</height>
+               </size>
+              </property>
+              <property name="fixedSize" stdset="0">
+               <size>
+                <width>70</width>
+                <height>70</height>
+               </size>
+              </property>
+             </widget>
+            </item>
+            <item row="0" column="0">
+             <widget class="QFrame" name="fra_state">
+              <property name="maximumSize">
+               <size>
+                <width>180</width>
+                <height>140</height>
+               </size>
+              </property>
+              <property name="frameShape">
+               <enum>QFrame::NoFrame</enum>
+              </property>
+              <property name="frameShadow">
+               <enum>QFrame::Plain</enum>
+              </property>
+              <layout class="QVBoxLayout" name="verticalLayout_6" stretch="1">
+               <item>
+                <widget class="QLabel" name="lb_generalState">
+                 <property name="minimumSize">
+                  <size>
+                   <width>0</width>
+                   <height>50</height>
+                  </size>
+                 </property>
+                 <property name="text">
+                  <string/>
+                 </property>
+                 <property name="alignment">
+                  <set>Qt::AlignCenter</set>
+                 </property>
+                </widget>
+               </item>
+              </layout>
+             </widget>
+            </item>
+            <item row="1" column="0">
              <widget class="QLabel" name="lb_nozzleState">
               <property name="text">
                <string/>
@@ -642,25 +608,45 @@
            </layout>
           </widget>
          </item>
+         <item alignment="Qt::AlignRight">
+          <widget class="QWidget" name="rightPanel" native="true">
+           <layout class="QVBoxLayout" name="verticalLayout_2" stretch="0">
+            <property name="spacing">
+             <number>5</number>
+            </property>
+            <property name="leftMargin">
+             <number>1</number>
+            </property>
+            <item>
+             <layout class="QVBoxLayout" name="verticalLayout_5">
+              <item>
+               <layout class="QVBoxLayout" name="verticalLayout_8">
+                <property name="spacing">
+                 <number>0</number>
+                </property>
                 <item>
                  <widget class="QPushButton" name="m_RightBtn">
                   <property name="minimumSize">
                    <size>
-                <width>200</width>
-                <height>70</height>
+                    <width>150</width>
+                    <height>95</height>
                    </size>
                   </property>
                   <property name="maximumSize">
                    <size>
-                <width>200</width>
-                <height>16777215</height>
+                    <width>150</width>
+                    <height>100</height>
                    </size>
                   </property>
                   <property name="styleSheet">
                    <string notr="true"/>
                   </property>
                   <property name="text">
-               <string>喷嘴开启</string>
+                   <string/>
+                  </property>
+                  <property name="icon">
+                   <iconset resource="image.qrc">
+                    <normaloff>:/image/RePipeOpen.png</normaloff>:/image/RePipeOpen.png</iconset>
                   </property>
                   <property name="iconSize">
                    <size>
@@ -677,24 +663,70 @@
                  </widget>
                 </item>
                 <item>
-             <widget class="QPushButton" name="m_LeftBtn">
+                 <widget class="QLabel" name="lb_RightBtn">
                   <property name="minimumSize">
                    <size>
-                <width>200</width>
-                <height>70</height>
+                    <width>0</width>
+                    <height>30</height>
                    </size>
                   </property>
                   <property name="maximumSize">
                    <size>
-                <width>200</width>
-                <height>444</height>
+                    <width>16777215</width>
+                    <height>30</height>
+                   </size>
+                  </property>
+                  <property name="text">
+                   <string>喷嘴开启</string>
+                  </property>
+                  <property name="alignment">
+                   <set>Qt::AlignCenter</set>
+                  </property>
+                 </widget>
+                </item>
+               </layout>
+              </item>
+              <item>
+               <spacer name="verticalSpacer">
+                <property name="orientation">
+                 <enum>Qt::Vertical</enum>
+                </property>
+                <property name="sizeHint" stdset="0">
+                 <size>
+                  <width>20</width>
+                  <height>40</height>
+                 </size>
+                </property>
+               </spacer>
+              </item>
+              <item>
+               <layout class="QVBoxLayout" name="verticalLayout_7">
+                <property name="spacing">
+                 <number>0</number>
+                </property>
+                <item>
+                 <widget class="QPushButton" name="m_LeftBtn">
+                  <property name="minimumSize">
+                   <size>
+                    <width>150</width>
+                    <height>95</height>
+                   </size>
+                  </property>
+                  <property name="maximumSize">
+                   <size>
+                    <width>150</width>
+                    <height>100</height>
                    </size>
                   </property>
                   <property name="styleSheet">
                    <string notr="true"/>
                   </property>
                   <property name="text">
-               <string>喷嘴关闭</string>
+                   <string/>
+                  </property>
+                  <property name="icon">
+                   <iconset resource="image.qrc">
+                    <normaloff>:/image/RePipeClose.png</normaloff>:/image/RePipeClose.png</iconset>
                   </property>
                   <property name="iconSize">
                    <size>
@@ -710,6 +742,35 @@
                   </property>
                  </widget>
                 </item>
+                <item>
+                 <widget class="QLabel" name="lb_LeftBtn">
+                  <property name="minimumSize">
+                   <size>
+                    <width>0</width>
+                    <height>30</height>
+                   </size>
+                  </property>
+                  <property name="maximumSize">
+                   <size>
+                    <width>16777215</width>
+                    <height>30</height>
+                   </size>
+                  </property>
+                  <property name="text">
+                   <string>喷嘴关闭</string>
+                  </property>
+                  <property name="alignment">
+                   <set>Qt::AlignCenter</set>
+                  </property>
+                  <property name="margin">
+                   <number>0</number>
+                  </property>
+                 </widget>
+                </item>
+               </layout>
+              </item>
+             </layout>
+            </item>
            </layout>
           </widget>
          </item>

Printsetting.cpp

@@ -23,17 +23,13 @@ PrintSetting::PrintSetting(QWidget *parent) :
     ui->labelSynTriggerPrintLenRatio->setHidden(1);
     ui->spinBoxSynTriggerPrintLenRatio->setHidden(1);
 
-    //隐藏这部分控件暂时用不到
-    ui->radioButtonSynTrigger->hide();
-    ui->labelDelayTriggerValue->hide();
-    ui->spinBoxDelayTriggerValue->hide();
-    ui->groupBox_3->hide();
-
     ui->labelTimeTriggerMode->setEnabled(false);
     ui->comboBoxTimeTriggerMode->setEnabled(false);
 
     init();
 
+    ui->eleEyeEdgetTriggerInner->click();
+    ui->radioButtonSynTriggerExternal->click();
 }
 
 PrintSetting::~PrintSetting()
@@ -137,7 +133,7 @@ void PrintSetting::TriggerupdateSysParaToUI(){
         ui->radioButtonSynTriggerInner->setChecked(sysPara->para.synTriggerInner);
         ui->radioButtonSynTriggerExternal->setChecked(sysPara->para.synTriggerExternal);
 
-        ui->spinBoxDelayTriggerValue->setValue(sysPara->para.printDelayMs);
+        ui->sb_printingDelay->setValue(sysPara->para.printDelayMs);
 #ifndef NON_CABLE
         ui->comboBoxTimeTriggerMode->setCurrentIndex(sysPara->para.timeTriggerPrintMode);
 #endif
@@ -156,7 +152,6 @@ void PrintSetting::TriggerupdateSysParaToUI(){
 
         /*----------------------------------------*/
         ui->spinBoxEleEyeTriggerPrintDelay->setValue(sysPara->para.eleEyeTriggerPrintDelay);
-        ui->checkBoxSynMakeClean->setChecked(sysPara->para.synClearCntInEleEyeMode);
         //ui->checkBoxEleEyeMakeClean->setChecked(sysPara->para.eleEyeClearCntInSynMode);
         ui->comboBoxEleEyeMakeClean->setCurrentIndex( sysPara->para.eleEyeClearCntInSynMode & 0x0f);
 
@@ -171,7 +166,6 @@ void PrintSetting::TriggerupdateSysParaToUI(){
 
         ui->spinBoxOutputPulseDelayMs->setEnabled(isPulseEenable);
         ui->spinBoxOuputPulseCol->setValue(sysPara->para.OuputPulseCol);
-        ui->checkEyeTriggerSynPrintEn->setChecked (sysPara->para.eleEyeTriggerSynPrintEn);
         ui->comboBoxSyncActType->setCurrentIndex (sysPara->para.synchronizorActType);
         //ui->checkBoxAutoSpeedEN->setChecked (sysPara->para.autoSynSpeedEn );
         ui->spinBoxEleMaskTime->setValue(sysPara->para.eleMaskTime);
@@ -240,25 +234,27 @@ void PrintSetting::applyUITriggerPara(){
         }
 
         sysPara->para.OuputPulseCol = ui->spinBoxOuputPulseCol->value();
-        if(((ui->checkEyeTriggerSynPrintEn->checkState()==1 )
-            &&(sysPara->para.printTriggerMode == PRINT_TRIGGER_ELEC_EYE_VOLTATE_LEVEL || sysPara->para.printTriggerMode == PRINT_TRIGGER_ELEC_EYE_EDGE))
+        if(((sysPara->para.printTriggerMode == PRINT_TRIGGER_ELEC_EYE_VOLTATE_LEVEL
+             || sysPara->para.printTriggerMode == PRINT_TRIGGER_ELEC_EYE_EDGE))
                 || sysPara->para.printTriggerMode == PRINT_TRIGGER_SYNCHRONIZER  )
         {
             ui->labelOutputPulseDelayMs->setText(tr("延时(毫米):"));
         }
         else ui->labelOutputPulseDelayMs->setText(tr("延时(毫秒):"));
-        //        if(sysPara->devOp->writeFpgaPrintPara() != -1)
-        //            QMessageBox::information(this,tr("提示"),tr("应用成功"));
+
     }
 
 }
 
 void PrintSetting::GetTriggerUIPara(){
     if(sysPara){
-        sysPara->para.printDelayMs = ui->spinBoxDelayTriggerValue->value();
+        sysPara->para.printDelayMs = ui->sb_printingDelay->value();
         sysPara->para.timeTriggerPrintMode = ui->comboBoxTimeTriggerMode->currentIndex();
         sysPara->para.elecEyeTriggerInterval = ui->spinBoxEleEyeTriggerIntervalMs->value();     //电眼触发的重复间隔
-        sysPara->para.photoElectricityRepeateNum = ui->spinBoxEleEyeTriggerRepeatCnt->value();
+        int value = 0;
+        if (ui->cb_unlimited) value = 65535;
+        else value = ui->spinBoxEleEyeTriggerRepeatCnt->value();
+        sysPara->para.photoElectricityRepeateNum = value;
 
         sysPara->para.synTriggerPrintLenMm = ui->spinBoxSynTriggerPrintLen->text().toFloat();
         //sysPara->para.synTriggerPrintLenMm = ui->spinBoxSynTriggerPrintLen->value();
@@ -301,7 +297,6 @@ void PrintSetting::GetTriggerUIPara(){
             sysPara->para.eleEyeTriggerSynPrintEn=false;
 
         sysPara->para.eleEyeTriggerPrintDelay = ui->spinBoxEleEyeTriggerPrintDelay->value();
-        sysPara->para.synClearCntInEleEyeMode = ui->checkBoxSynMakeClean->isChecked();
         sysPara->para.eleEyeClearCntInSynMode = (sysPara->para.eleEyeClearCntInSynMode & 0xf0) + ui->comboBoxEleEyeMakeClean->currentIndex();   //ui->checkBoxEleEyeMakeClean->isChecked();
         //sysPara->para.autoSynSpeedEn = ui->checkBoxAutoSpeedEN->isChecked ();
         sysPara->para.autoSynSpeedEn = 0;
@@ -359,14 +354,11 @@ void PrintSetting::on_radioButtonSynTrigger_pressed()
 
 void PrintSetting::on_checkEyeTriggerSynPrintEn_clicked(bool checked)
 {
-    qDebug()<<"checked:"<<checked;
-    int triggerMode = sysPara->para.printTriggerMode;
     if(sysPara)
     {
-        //if( !sysPara->para.eleEyeTriggerSynPrintEn )
+        int triggerMode = sysPara->para.printTriggerMode;
         if( checked)
         {
-            //ui->radioButtonSynTrigger->setChecked(1);
 #ifndef NON_CABLE
             ui->spinBoxSynTriggerPrintLen->setEnabled(1);
 #endif
@@ -379,7 +371,7 @@ void PrintSetting::on_checkEyeTriggerSynPrintEn_clicked(bool checked)
             ui->pushButtonApplyPulseFix->setEnabled(1);
             ui->comboBoxSynPrintMode->setEnabled(1);
             ui->labelSynPrintMode->setEnabled(1);
-            //ui->checkBoxAutoSpeedEN->setEnabled (1);
+            ui->cb_unlimited->setEnabled (1);
             ui->spinBoxEleEyeTriggerIntervalMs->setEnabled(0);
             ui->labelEleEyeTriggerPrintDelay->setText(tr("触发延时(毫米)"));
             ui->labelEleEyeTriggerIntervalMs->setText(tr("重复间隔(毫米)"));
@@ -392,7 +384,6 @@ void PrintSetting::on_checkEyeTriggerSynPrintEn_clicked(bool checked)
         }
         else
         {
-            //            ui->radioButtonSynTrigger->setChecked(triggerMode == PRINT_TRIGGER_SYNCHRONIZER);
 #ifndef NON_CABLE
             ui->spinBoxSynTriggerPrintLen->setEnabled(triggerMode == PRINT_TRIGGER_SYNCHRONIZER);
 #endif
@@ -405,36 +396,28 @@ void PrintSetting::on_checkEyeTriggerSynPrintEn_clicked(bool checked)
             ui->pushButtonApplyPulseFix->setEnabled(triggerMode == PRINT_TRIGGER_SYNCHRONIZER);
             ui->comboBoxSynPrintMode->setEnabled(triggerMode == PRINT_TRIGGER_SYNCHRONIZER);
             ui->labelSynPrintMode->setEnabled(triggerMode == PRINT_TRIGGER_SYNCHRONIZER);
-            //            ui->checkBoxAutoSpeedEN->setEnabled (triggerMode == PRINT_TRIGGER_SYNCHRONIZER);
-            //ui->spinBoxEleEyeTriggerIntervalMs->setEnabled(triggerMode == PRINT_TRIGGER_SYNCHRONIZER);
+            ui->cb_unlimited->setEnabled(triggerMode == PRINT_TRIGGER_SYNCHRONIZER);
             ui->spinBoxEleEyeTriggerIntervalMs->setEnabled(1);
             ui->labelEleEyeTriggerPrintDelay->setText(tr("触发延时(毫秒)"));
             ui->labelEleEyeTriggerIntervalMs->setText(tr("重复间隔(毫秒)"));
             ui->labelEleMaskTime->setText(tr("抑止距离(毫秒)"));
-            ui->labelOutputPulseDelayMs->setText(  ui->radioButtonSynTrigger->isChecked()?tr("延时(毫米):"):tr("延时(毫秒):"));
-
         }
     }
 }
 
 void PrintSetting::setTriggerUI(int triggerMode){
-
-    ui->radioButtonDelayTrigger->setChecked(triggerMode == PRINT_TRIGGER_TIME);
-    ui->spinBoxDelayTriggerValue->setEnabled(triggerMode == PRINT_TRIGGER_TIME);
-    ui->labelDelayTriggerValue->setEnabled(triggerMode == PRINT_TRIGGER_TIME);
-    // ui->comboBoxTimeTriggerMode->setEnabled(triggerMode == PRINT_TRIGGER_TIME);
-    //  ui->labelTimeTriggerMode->setEnabled(triggerMode == PRINT_TRIGGER_TIME);
+//    ui->sb_printingDelay->setEnabled(triggerMode == PRINT_TRIGGER_TIME);
+    ui->lb_printingDelay->setEnabled(triggerMode == PRINT_TRIGGER_TIME);
 
     ui->radioButtonEleEyeEdgetTrigger->setChecked( triggerMode == PRINT_TRIGGER_ELEC_EYE_EDGE);
     ui->radioButtonEleEyeLevelTrigger->setChecked(triggerMode == PRINT_TRIGGER_ELEC_EYE_VOLTATE_LEVEL);
     ui->spinBoxEleEyeTriggerIntervalMs->setEnabled(triggerMode == PRINT_TRIGGER_ELEC_EYE_VOLTATE_LEVEL || triggerMode == PRINT_TRIGGER_ELEC_EYE_EDGE || triggerMode == PRINT_TRIGGER_TIME);
     ui->labelEleEyeTriggerIntervalMs->setEnabled(triggerMode == PRINT_TRIGGER_ELEC_EYE_VOLTATE_LEVEL || triggerMode == PRINT_TRIGGER_ELEC_EYE_EDGE);
     ui->spinBoxEleEyeTriggerRepeatCnt->setEnabled(triggerMode == PRINT_TRIGGER_ELEC_EYE_VOLTATE_LEVEL || triggerMode == PRINT_TRIGGER_ELEC_EYE_EDGE);
+    ui->cb_unlimited->setEnabled(triggerMode == PRINT_TRIGGER_ELEC_EYE_VOLTATE_LEVEL || triggerMode == PRINT_TRIGGER_ELEC_EYE_EDGE);
     ui->labelEleEyeTriggerRepeatCnt->setEnabled(triggerMode == PRINT_TRIGGER_ELEC_EYE_VOLTATE_LEVEL || triggerMode == PRINT_TRIGGER_ELEC_EYE_EDGE);
     ui->spinBoxEleEyeTriggerPrintDelay->setEnabled(triggerMode == PRINT_TRIGGER_ELEC_EYE_VOLTATE_LEVEL || triggerMode == PRINT_TRIGGER_ELEC_EYE_EDGE || PRINT_TRIGGER_SYNCHRONIZER);
     ui->labelEleEyeTriggerPrintDelay->setEnabled(triggerMode == PRINT_TRIGGER_ELEC_EYE_VOLTATE_LEVEL || triggerMode == PRINT_TRIGGER_ELEC_EYE_EDGE || PRINT_TRIGGER_SYNCHRONIZER);
-    ui->checkBoxSynMakeClean->setEnabled(triggerMode == PRINT_TRIGGER_ELEC_EYE_VOLTATE_LEVEL || triggerMode == PRINT_TRIGGER_ELEC_EYE_EDGE);
-    ui->checkEyeTriggerSynPrintEn->setEnabled (triggerMode == PRINT_TRIGGER_ELEC_EYE_VOLTATE_LEVEL || triggerMode == PRINT_TRIGGER_ELEC_EYE_EDGE);
     ui->labelEleMaskTime->setEnabled (triggerMode == PRINT_TRIGGER_ELEC_EYE_VOLTATE_LEVEL || triggerMode == PRINT_TRIGGER_ELEC_EYE_EDGE);
     ui->spinBoxEleMaskTime->setEnabled (triggerMode == PRINT_TRIGGER_ELEC_EYE_VOLTATE_LEVEL || triggerMode == PRINT_TRIGGER_ELEC_EYE_EDGE);
 
@@ -442,8 +425,6 @@ void PrintSetting::setTriggerUI(int triggerMode){
             (triggerMode == PRINT_TRIGGER_ELEC_EYE_VOLTATE_LEVEL || triggerMode == PRINT_TRIGGER_ELEC_EYE_EDGE)
             )
     {
-        //ui->radioButtonSynTrigger->setChecked(1);
-        //        ui->spinBoxSynTriggerPrintLen->setEnabled(0);
         ui->spinBoxEleEyeTriggerIntervalMs->setEnabled(0);
         ui->labelSynTriggerPrintLen->setEnabled(1);
         ui->lineEditTriggerPulsePerMm->setEnabled(1);
@@ -454,19 +435,15 @@ void PrintSetting::setTriggerUI(int triggerMode){
         ui->pushButtonApplyPulseFix->setEnabled(1);
         ui->comboBoxSynPrintMode->setEnabled(1);
         ui->labelSynPrintMode->setEnabled(1);
-        //ui->checkBoxAutoSpeedEN->setEnabled (1);
         ui->labelEleMaskTime->setEnabled(1);
         ui->spinBoxEleMaskTime->setEnabled(1);
 
-        //ui->spinBoxEleMaskTime->setEnabled(1);
-
         ui->labelEleEyeTriggerPrintDelay->setText(tr("触发延时(毫米)"));
         ui->labelEleEyeTriggerIntervalMs->setText(tr("重复间隔(毫米)"));
         ui->labelEleMaskTime->setText(tr("抑止距离(毫米)"));
     }
     else
     {
-        ui->radioButtonSynTrigger->setChecked(triggerMode == PRINT_TRIGGER_SYNCHRONIZER);
 #ifndef NON_CABLE
         ui->spinBoxSynTriggerPrintLen->setEnabled(triggerMode == PRINT_TRIGGER_SYNCHRONIZER);
 #endif
@@ -491,9 +468,8 @@ void PrintSetting::setTriggerUI(int triggerMode){
         ui->labelEleEyeTriggerIntervalMs->setText(tr("重复间隔(毫秒)"));
         ui->labelEleMaskTime->setText(tr("封锁时间(毫秒)"));
     }
-    if(( ( //sysPara->para.eleEyeTriggerSynPrintEn ||
-           ui->checkEyeTriggerSynPrintEn->isChecked())
-         &&(triggerMode == PRINT_TRIGGER_ELEC_EYE_VOLTATE_LEVEL || triggerMode == PRINT_TRIGGER_ELEC_EYE_EDGE))
+    if(triggerMode == PRINT_TRIGGER_ELEC_EYE_VOLTATE_LEVEL
+         || triggerMode == PRINT_TRIGGER_ELEC_EYE_EDGE
             || triggerMode == PRINT_TRIGGER_SYNCHRONIZER  )
     {
         ui->labelOutputPulseDelayMs->setText(tr("延时(毫米):"));
@@ -501,25 +477,6 @@ void PrintSetting::setTriggerUI(int triggerMode){
     else ui->labelOutputPulseDelayMs->setText(tr("延时(毫秒):"));
 
     setSynPrintMode(sysPara->para.sysTriggerPrintMode);
-
-    //72版本禁用该输入框
-    //67打开
-    // if(triggerMode== PRINT_TRIGGER_SYNCHRONIZER){
-    // const unsigned short &FpgaVer=sysPara->status.build_dat.builTime;
-    // if(72==FpgaVer)
-    // {
-    // ui->spinBoxSynTriggerPrintLenRatio->setValue(0);
-    // ui->spinBoxSynTriggerPrintLenRatio->setEnabled(false);
-    // }
-    // else if(67==FpgaVer)
-    // {
-    // ui->spinBoxSynTriggerPrintLenRatio->setEnabled(true);
-    // }
-    // }
-    // else{
-    // ui->spinBoxSynTriggerPrintLenRatio->setValue(0);
-    // ui->spinBoxSynTriggerPrintLenRatio->setEnabled(false);
-    // }
 }
 
 void PrintSetting::setSynPrintMode(int mode){
@@ -596,6 +553,22 @@ void PrintSetting::applyStyleSheet()
             background-color: #BAE7FF;
             }
 
+            QPushButton#checkBtn {
+            background-color: #E6F7FF;
+            border: 1px solid #87CEEB;
+            border-radius: 4px;
+            font-size: 24px;
+            color: #228B22;
+            }
+
+            QPushButton#checkBtn:hover {
+            background-color: #D1E9FF;
+            }
+
+            QPushButton#checkBtn:pressed {
+            background-color: #BAE7FF;
+            }
+
             QLabel {
             font-size: 18px;
             color: #000000;
@@ -644,6 +617,12 @@ void PrintSetting::applyStyleSheet()
             QWidget#fileTab, QWidget#extraTab, QWidget#settingsTab, QWidget#serviceTab {
             background-color: #E3E7EC;
             }
+
+            QRadioButton {
+            background-color: rgb(192, 205, 210);
+            border-radius: 5px;
+            padding-left: 5px;
+            }
             )";
 
     this->setStyleSheet(styleSheet);
@@ -651,26 +630,28 @@ void PrintSetting::applyStyleSheet()
 
 void PrintSetting::on_eleEyeEdgetTriggerInner_clicked()
 {
+    setEnableEleEyeSetting(false);
+
+    if (sysPara == NULL) return;
     if(ui->radioButtonSynTriggerInner->isChecked()){
         sysPara->para.printTriggerMode = PRINT_TRIGGER_TIME;
     }else
         sysPara->para.printTriggerMode = PRINT_TRIGGER_SYNCHRONIZER;
     setTriggerUI(sysPara->para.printTriggerMode);
-
-    ui->checkEyeTriggerSynPrintEn->setChecked(false);
-    on_checkEyeTriggerSynPrintEn_clicked(ui->checkEyeTriggerSynPrintEn->isChecked());
-    setEnableEleEyeSetting(false);
 }
 
 void PrintSetting::setEnableEleEyeSetting(bool flag){
 
     ui->labelEleEyeTriggerIntervalMs->setEnabled(flag);
-    ui->spinBoxEleEyeTriggerIntervalMs->setEnabled(flag ||  sysPara->para.printTriggerMode == PRINT_TRIGGER_TIME);
+    if (sysPara) {
+        ui->spinBoxEleEyeTriggerIntervalMs->
+                setEnabled(flag || sysPara->para.printTriggerMode == PRINT_TRIGGER_TIME);
+    }
     ui->labelEleMaskTime->setEnabled(flag);
     ui->spinBoxEleMaskTime->setEnabled(flag);
     ui->labelEleEyeTriggerRepeatCnt->setEnabled(flag);
     ui->spinBoxEleEyeTriggerRepeatCnt->setEnabled(flag);
-    ui->checkBoxSynMakeClean->setEnabled(flag);
+    ui->cb_unlimited->setEnabled(flag);
     ui->radioButtonEleEyeEdgetTrigger->setEnabled(flag);
     ui->radioButtonEleEyeLevelTrigger->setEnabled(flag);
 
@@ -678,12 +659,8 @@ void PrintSetting::setEnableEleEyeSetting(bool flag){
 
 void PrintSetting::on_eleEyeEdgetTriggerExternal_clicked()
 {
-    if(ui->radioButtonSynTrigger->isChecked())
-        ui->checkEyeTriggerSynPrintEn->setChecked(true);
-    else
-        ui->checkEyeTriggerSynPrintEn->setChecked(false);
-
-    on_checkEyeTriggerSynPrintEn_clicked(ui->checkEyeTriggerSynPrintEn->isChecked());
+    if (sysPara)
+        on_checkEyeTriggerSynPrintEn_clicked(sysPara->para.eleEyeTriggerSynPrintEn);
     setEnableEleEyeSetting(true);
 }
 
@@ -697,30 +674,30 @@ void PrintSetting::setEnableSynTriggerSetting(bool flag){
     ui->comboBoxSyncActType->setEnabled(flag);
     ui->labelSynPrintMode->setEnabled(flag);
     ui->comboBoxSynPrintMode->setEnabled(flag);
-
+    ui->cb_unlimited->setEnabled(flag);
 }
 
 void PrintSetting::on_radioButtonSynTriggerInner_clicked()
 {
+    setEnableSynTriggerSetting(false);
+    if (sysPara == NULL) return;
     if(ui->eleEyeEdgetTriggerInner->isChecked()){
         sysPara->para.printTriggerMode = PRINT_TRIGGER_TIME;
         setTriggerUI(sysPara->para.printTriggerMode);
     }
+    if (sysPara)
+        on_checkEyeTriggerSynPrintEn_clicked(sysPara->para.eleEyeTriggerSynPrintEn);
 
-    ui->checkEyeTriggerSynPrintEn->setChecked(false);
-    on_checkEyeTriggerSynPrintEn_clicked(ui->checkEyeTriggerSynPrintEn->isChecked());
-    setEnableSynTriggerSetting(false);
 }
 
 void PrintSetting::on_radioButtonSynTriggerExternal_clicked()
 {
-    if(ui->eleEyeEdgetTriggerExternal->isChecked())
-        ui->checkEyeTriggerSynPrintEn->setChecked(true);
-    else{
-        ui->checkEyeTriggerSynPrintEn->setChecked(false);
+    if(!ui->eleEyeEdgetTriggerExternal->isChecked()){
+        if (sysPara)
             sysPara->para.printTriggerMode = PRINT_TRIGGER_SYNCHRONIZER;
     }
-    on_checkEyeTriggerSynPrintEn_clicked(ui->checkEyeTriggerSynPrintEn->isChecked());
+    if (sysPara)
+        on_checkEyeTriggerSynPrintEn_clicked(sysPara->para.eleEyeTriggerSynPrintEn);
     setEnableSynTriggerSetting(true);
 }
 
@@ -741,3 +718,8 @@ void PrintSetting::on_checkBoxPulseOutputEnable_clicked(bool checked)
     isPulseEenable = checked;
     ui->spinBoxOutputPulseDelayMs->setEnabled(checked);
 }
+
+void PrintSetting::on_cb_unlimited_clicked(bool checked)
+{
+    ui->spinBoxEleEyeTriggerRepeatCnt->setEnabled(!checked);
+}

Printsetting.h

@@ -75,6 +75,8 @@ private slots:
 
     void on_checkBoxPulseOutputEnable_clicked(bool checked);
 
+    void on_cb_unlimited_clicked(bool checked);
+
 private:
     Ui::PrintSetting *ui;
 

QtUI.pro

@@ -165,7 +165,8 @@ HEADERS +=  Public.h \
     Log/logger.h \
     Log/logmessage.h \
     Log/logglobal.h \
-    loginfoctrl.h
+    loginfoctrl.h \
+    runtimectrl.h
 
 
 FORMS += \
@@ -321,7 +322,8 @@ SOURCES +=\
     Log/filelogger.cpp \
     Log/logger.cpp \
     Log/logmessage.cpp \
-    loginfoctrl.cpp
+    loginfoctrl.cpp \
+    runtimectrl.cpp
 
 
 

SysPara.cpp

@@ -108,8 +108,10 @@ void SysPara::loadParaFromFile(){
 				file.close();
                 if(para.gearPumpSpeedAlarm < 1000 || para.gearPumpSpeedAlarm > 2000)
                     para.gearPumpSpeedAlarm = 1500;
-                        if(para.gearPumpEnable && !para.flagOfReclaimPumEnable)
-                            para.flagOfReclaimPumEnable = 1;
+
+                // 将flagOfReclaimPumEnable强制设置为0。该参数影响的是压力控制算法，但现在已经不使用 byons@2026年5月12日
+                if(para.gearPumpEnable && para.flagOfReclaimPumEnable)
+                    para.flagOfReclaimPumEnable = false;
                 if (DeviceCodefile.isOpen()) {
                     DeviceCodefile.close();
                 }
@@ -156,7 +158,7 @@ void SysPara::loadDefaultPara(){
         para.synPulseNumPerMm = 8;// 同步器参数 脉冲/毫米
         para.OuputPulseCol = 0;//桂林客户,精准控制输出脉冲的位置,精确到打印的列数
         para.gearPumpEnable = 1;
-        para.flagOfReclaimPumEnable = 1;
+        para.flagOfReclaimPumEnable = 0;
 
         para.oscillatorVoltage = 30;//晶振电压
         para.highVoltageLevel = 100;//高压包容差
@@ -1015,6 +1017,8 @@ void SysPara::saveRFIDPara()
     out << RFIDPara.maintenanceInterval;
     out << RFIDPara.maintenanceEndDate;
     out << RFIDPara.needMaintenance;
+    out << RFIDPara.runTime;
+    out << RFIDPara.maintenanceHours;
     out << para.rfidCountDown;
 
     if(!file.flush()){
@@ -1030,6 +1034,7 @@ void SysPara::saveRFIDPara()
     }
     file.close();
 }
+
 bool SysPara::loadRFIDPara()
 {
     QFile file(RFID_FILE_PATH);
@@ -1055,6 +1060,8 @@ bool SysPara::loadRFIDPara()
        in >> RFIDPara.maintenanceInterval;
        in >> RFIDPara.maintenanceEndDate;
        in >> RFIDPara.needMaintenance;
+       in >> RFIDPara.runTime;
+       in >> RFIDPara.maintenanceHours;
        in >> para.rfidCountDown;
 
        file.close();

SysPara.h

@@ -882,6 +882,9 @@ typedef struct
     unsigned int maintenanceInterval;
     unsigned int maintenanceEndDate;
     bool needMaintenance;
+    // 运行时间与保养间隔时间 runTime>=maintenanceHours 时提示保养
+    unsigned int runTime; // 单位：秒
+    unsigned int maintenanceHours;
 }RFIDPara_t;
 
 #define MDT 0

SystemManage.cpp

@@ -34,9 +34,7 @@ SystemManage::SystemManage(QWidget *parent) :
     ui->pushButtonCompressPump->setEnabled(false);
     ui->pushButtonMainInkPump->setEnabled(false);
     ui->pushButtonReleaseValve->setEnabled(false);
-
-    // 总是启用回收泵控制 byons@2026年4月22日
-    // ui->pushButtonReclaimPump->setEnabled(false);
+    ui->pushButtonReclaimPump->setEnabled(false);
 
     ui->pushButtonGearPump->setEnabled(true);
     ui->pushButtonGearPumpOff->setEnabled(true);
@@ -228,18 +226,14 @@ void SystemManage::setPumpValveBottonEnable(bool enable){
             ui->pushButtonCompressPump->setEnabled(false);
             ui->pushButtonMainInkPump->setEnabled(false);
             ui->pushButtonReleaseValve->setEnabled(false);
-
-            // 总是启用回收泵控制 byons@2026年4月22日
-            // ui->pushButtonReclaimPump->setEnabled(enable);
+            ui->pushButtonReclaimPump->setEnabled(enable);
         }
         else
         {
             ui->pushButtonCompressPump->setEnabled(enable);
             ui->pushButtonMainInkPump->setEnabled(enable);
             ui->pushButtonReleaseValve->setEnabled(enable);
-
-            // 总是启用回收泵控制 byons@2026年4月22日
-            // ui->pushButtonReclaimPump->setEnabled(enable);
+            ui->pushButtonReclaimPump->setEnabled(enable);
         }
     }
     ui->pushButtonCycleValve->setEnabled(enable);
@@ -1345,7 +1339,7 @@ void SystemManage::programFPGAProcess(){
         QFile file("/udisk/FPGAFile.rbf");
         if(!file.exists())
         {
-            QMessageBox::warning(this,"提示","没有FPGA升级文件");
+            QMessageBox::warning(this,tr("提示"), tr("没有FPGA升级文件"));
             programFPGATimer->stop();
             return;
         }

countervarset.ui

@@ -267,54 +267,7 @@
    </widget>
    <widget class="QWidget" name="tab_2">
     <property name="styleSheet">
-     <string notr="true">QSpinBox::down-button {
-    width: 23px;   /* 图标显示宽度 */
-    height: 23px;  /* 图标显示高度 */
-    border: 1px solid #333333;
-    border-radius: 3px;
-	background-color: #5396C1;
-}
-
-QSpinBox::down-arrow {
-    image: url(image/down_white.png);
-	height: 18px;
-	width: 18px;
-}
-
-QSpinBox::up-button {
-    width: 23px;   /* 图标显示宽度 */
-    height: 23px;  /* 图标显示高度 */
-    border: 1px solid #333333;
-    border-radius: 3px;
-	background-color: #5396C1;
-}
-
-QSpinBox::up-arrow {
-    image: url(image/up_white.png);
-	height: 18px;
-	width: 18px;
-}
-
-QSpinBox {
-border: 1px solid #333333;
-}
-
-QCheckBox {
-    color: #000000;
-}
-
-QCheckBox::indicator {
-    width: 15px;
-    height: 15px;
-    border: 1px solid #96A0A9;
-    border-radius: 8px;
-    background-color: #ffffff;
-}
-
-QCheckBox::indicator:checked {
-    background-color: #95B2D4;
-    border-color: #95B2D4;
-}</string>
+     <string notr="true"/>
     </property>
     <attribute name="title">
      <string>计数器1</string>
@@ -748,8 +701,8 @@ QCheckBox::indicator:checked {
         </property>
         <property name="sizeHint" stdset="0">
          <size>
-          <width>40</width>
-          <height>20</height>
+          <width>37</width>
+          <height>17</height>
          </size>
         </property>
        </spacer>
@@ -812,18 +765,6 @@ QCheckBox::indicator:checked {
       </size>
      </property>
      <layout class="QHBoxLayout" name="horizontalLayout_2">
-      <property name="leftMargin">
-       <number>0</number>
-      </property>
-      <property name="topMargin">
-       <number>0</number>
-      </property>
-      <property name="rightMargin">
-       <number>0</number>
-      </property>
-      <property name="bottomMargin">
-       <number>0</number>
-      </property>
       <item>
        <spacer name="horizontalSpacer_2">
         <property name="orientation">
@@ -858,10 +799,7 @@ QCheckBox::indicator:checked {
          </size>
         </property>
         <property name="styleSheet">
-         <string notr="true">QRadioButton::indicator {
-width: 25px;
-height: 25px;
-}</string>
+         <string notr="true"/>
         </property>
         <property name="text">
          <string>增量值: </string>
@@ -1237,21 +1175,9 @@ height: 25px;
        <height>50</height>
       </size>
      </property>
-     <layout class="QHBoxLayout" name="horizontalLayout_3">
-      <property name="leftMargin">
-       <number>1</number>
-      </property>
-      <property name="topMargin">
-       <number>1</number>
-      </property>
-      <property name="rightMargin">
-       <number>1</number>
-      </property>
-      <property name="bottomMargin">
-       <number>1</number>
-      </property>
+     <layout class="QHBoxLayout" name="horizontalLayout_4">
       <item>
-       <spacer name="horizontalSpacer_3">
+       <spacer name="horizontalSpacer_4">
         <property name="orientation">
          <enum>Qt::Horizontal</enum>
         </property>
@@ -1274,7 +1200,7 @@ height: 25px;
         <property name="minimumSize">
          <size>
           <width>0</width>
-          <height>0</height>
+          <height>32</height>
          </size>
         </property>
         <property name="maximumSize">
@@ -1305,27 +1231,27 @@ height: 25px;
        <height>50</height>
       </rect>
      </property>
-     <layout class="QHBoxLayout" name="horizontalLayout_4">
-      <property name="leftMargin">
-       <number>0</number>
+     <property name="minimumSize">
+      <size>
+       <width>100</width>
+       <height>50</height>
+      </size>
      </property>
-      <property name="topMargin">
-       <number>0</number>
-      </property>
-      <property name="rightMargin">
-       <number>0</number>
-      </property>
-      <property name="bottomMargin">
-       <number>0</number>
+     <property name="maximumSize">
+      <size>
+       <width>100</width>
+       <height>50</height>
+      </size>
      </property>
+     <layout class="QHBoxLayout" name="horizontalLayout_3">
       <item>
-       <spacer name="horizontalSpacer_4">
+       <spacer name="horizontalSpacer_3">
         <property name="orientation">
          <enum>Qt::Horizontal</enum>
         </property>
         <property name="sizeHint" stdset="0">
          <size>
-          <width>40</width>
+          <width>6</width>
           <height>20</height>
          </size>
         </property>
@@ -1342,7 +1268,7 @@ height: 25px;
         <property name="minimumSize">
          <size>
           <width>0</width>
-          <height>0</height>
+          <height>32</height>
          </size>
         </property>
         <property name="maximumSize">
@@ -1352,10 +1278,7 @@ height: 25px;
          </size>
         </property>
         <property name="styleSheet">
-         <string notr="true">QRadioButton::indicator {
-width: 25px;
-height: 25px;
-}</string>
+         <string notr="true"/>
         </property>
         <property name="text">
          <string>增量值: </string>

dialogmaintenancetimesetting.cpp

@@ -1,5 +1,6 @@
 #include "dialogmaintenancetimesetting.h"
 #include "ui_dialogmaintenancetimesetting.h"
+#include <QDate>
 #include <QMessageBox>
 
 DialogMaintenanceTimeSetting::DialogMaintenanceTimeSetting(QWidget *parent) :
@@ -15,9 +16,18 @@ DialogMaintenanceTimeSetting::~DialogMaintenanceTimeSetting()
     delete ui;
 }
 
-int DialogMaintenanceTimeSetting::getInterval()
+int DialogMaintenanceTimeSetting::getInterval(RFIDPara_t* para)
 {
-    return ui->spinBox->value();
+    para->maintenanceInterval = ui->spinBox->value();
+    para->maintenanceHours = ui->spinBoxRuntime->value();
+    if (resetSchedule) {
+        resetSchedule = false;
+        QDate curDate = QDate::currentDate();
+        int curdate = curDate.toString("yyMMdd").toInt();
+        para->maintenanceDate = curdate;    // 维护日期
+        para->runTime = 0;
+    }
+    return 0;
 }
 bool DialogMaintenanceTimeSetting::getResetSchedule(){
     bool flag = resetSchedule;
@@ -37,16 +47,26 @@ void DialogMaintenanceTimeSetting::on_pushButton_Reset_clicked()
     }
 }
 
-void DialogMaintenanceTimeSetting::updateMaintenanceIntervalToUI(int interval){
-    ui->spinBox->setValue(interval);
-}
-
-void DialogMaintenanceTimeSetting::updateMaintenanceTime(QString str){
-    ui->label_MaintenanceTime->setText(str);
-}
-
 void DialogMaintenanceTimeSetting::disableMaintenanceTimeSet(bool flag){
     ui->spinBox->setEnabled(flag);
     ui->pushButton_Reset->setEnabled(flag);
     ui->label_MaintenanceTime->setEnabled(flag);
+
+    ui->label_4->setEnabled(flag);
+    ui->label_5->setEnabled(flag);
+    ui->spinBoxRuntime->setEnabled(flag);
+}
+
+void DialogMaintenanceTimeSetting::updateUI(RFIDPara_t para)
+{
+    QDate curDate = QDate::currentDate();
+    QString mtEndDatestr = "20" + QString::number(para.maintenanceEndDate);
+    QDate mtEndDate = QDate::fromString(mtEndDatestr,"yyyyMMdd");
+    int timeoutDay = curDate.daysTo(mtEndDate);
+    ui->label_MaintenanceTime->setText(QString("%1 Days").arg(timeoutDay));
+    ui->spinBox->setValue(para.maintenanceInterval);
+    double h = para.runTime / 60.0 / 60.0;
+    // 保留两位小数
+    ui->label_CurRunTime->setText(QString("%1 Hours").arg(QString::number(h, 'f', 2)));
+    ui->spinBoxRuntime->setValue(para.maintenanceHours);
 }

dialogmaintenancetimesetting.h

@@ -2,7 +2,11 @@
 #define DIALOGMAINTENANCETIMESETTING_H
 
 #include <QDialog>
+#include "SysPara.h"
 
+/**
+    设置保养间隔ui
+**/
 namespace Ui {
 class DialogMaintenanceTimeSetting;
 }
@@ -15,12 +19,11 @@ public:
     explicit DialogMaintenanceTimeSetting(QWidget *parent = 0);
     ~DialogMaintenanceTimeSetting();
     bool getResetSchedule();
-    int getInterval();
+    int getInterval(RFIDPara_t* para);
     bool resetSchedule;
-    void updateMaintenanceIntervalToUI(int);
-    void updateMaintenanceTime(QString);
     void disableMaintenanceTimeSet(bool);
 
+    void updateUI(RFIDPara_t para);
 private slots:
 
     void on_pushButton_Reset_clicked();

dialogmaintenancetimesetting.ui

@@ -6,23 +6,26 @@
    <rect>
     <x>0</x>
     <y>0</y>
-    <width>524</width>
-    <height>260</height>
+    <width>536</width>
+    <height>312</height>
    </rect>
   </property>
   <property name="focusPolicy">
    <enum>Qt::ClickFocus</enum>
   </property>
   <property name="windowTitle">
-   <string>Dialog</string>
+   <string>设置保养间隔</string>
+  </property>
+  <property name="styleSheet">
+   <string notr="true"/>
   </property>
   <widget class="QDialogButtonBox" name="buttonBox">
    <property name="geometry">
     <rect>
-     <x>170</x>
+     <x>260</x>
      <y>220</y>
-     <width>341</width>
-     <height>32</height>
+     <width>241</width>
+     <height>71</height>
     </rect>
    </property>
    <property name="orientation">
@@ -44,6 +47,9 @@
    <property name="text">
     <string>保养周期</string>
    </property>
+   <property name="alignment">
+    <set>Qt::AlignBottom|Qt::AlignLeading|Qt::AlignLeft</set>
+   </property>
   </widget>
   <widget class="QSpinBox" name="spinBox">
    <property name="geometry">
@@ -51,7 +57,7 @@
      <x>30</x>
      <y>70</y>
      <width>111</width>
-     <height>41</height>
+     <height>31</height>
     </rect>
    </property>
    <property name="keyboardTracking">
@@ -73,7 +79,7 @@
      <x>150</x>
      <y>70</y>
      <width>67</width>
-     <height>41</height>
+     <height>31</height>
     </rect>
    </property>
    <property name="text">
@@ -83,10 +89,10 @@
   <widget class="QPushButton" name="pushButton_Reset">
    <property name="geometry">
     <rect>
-     <x>250</x>
-     <y>30</y>
-     <width>251</width>
-     <height>81</height>
+     <x>20</x>
+     <y>220</y>
+     <width>191</width>
+     <height>71</height>
     </rect>
    </property>
    <property name="text">
@@ -96,22 +102,22 @@
   <widget class="QLabel" name="label_3">
    <property name="geometry">
     <rect>
-     <x>40</x>
-     <y>140</y>
-     <width>100</width>
+     <x>250</x>
+     <y>70</y>
+     <width>121</width>
      <height>30</height>
     </rect>
    </property>
    <property name="text">
-    <string>维护时间:</string>
+    <string>剩余维护时间:</string>
    </property>
   </widget>
   <widget class="QLabel" name="label_MaintenanceTime">
    <property name="geometry">
     <rect>
-     <x>120</x>
-     <y>140</y>
-     <width>100</width>
+     <x>370</x>
+     <y>70</y>
+     <width>131</width>
      <height>30</height>
     </rect>
    </property>
@@ -119,6 +125,83 @@
     <string>TextLabel</string>
    </property>
   </widget>
+  <widget class="QLabel" name="label_4">
+   <property name="geometry">
+    <rect>
+     <x>30</x>
+     <y>110</y>
+     <width>141</width>
+     <height>31</height>
+    </rect>
+   </property>
+   <property name="text">
+    <string>运行时间</string>
+   </property>
+   <property name="alignment">
+    <set>Qt::AlignBottom|Qt::AlignLeading|Qt::AlignLeft</set>
+   </property>
+  </widget>
+  <widget class="QSpinBox" name="spinBoxRuntime">
+   <property name="geometry">
+    <rect>
+     <x>30</x>
+     <y>150</y>
+     <width>111</width>
+     <height>31</height>
+    </rect>
+   </property>
+   <property name="keyboardTracking">
+    <bool>true</bool>
+   </property>
+   <property name="minimum">
+    <number>3000</number>
+   </property>
+   <property name="maximum">
+    <number>20000</number>
+   </property>
+   <property name="value">
+    <number>3000</number>
+   </property>
+  </widget>
+  <widget class="QLabel" name="label_5">
+   <property name="geometry">
+    <rect>
+     <x>150</x>
+     <y>150</y>
+     <width>67</width>
+     <height>31</height>
+    </rect>
+   </property>
+   <property name="text">
+    <string>(小时)</string>
+   </property>
+  </widget>
+  <widget class="QLabel" name="label_CurRunTime">
+   <property name="geometry">
+    <rect>
+     <x>370</x>
+     <y>150</y>
+     <width>131</width>
+     <height>30</height>
+    </rect>
+   </property>
+   <property name="text">
+    <string>TextLabel</string>
+   </property>
+  </widget>
+  <widget class="QLabel" name="label_6">
+   <property name="geometry">
+    <rect>
+     <x>250</x>
+     <y>150</y>
+     <width>121</width>
+     <height>30</height>
+    </rect>
+   </property>
+   <property name="text">
+    <string>当前运行时间:</string>
+   </property>
+  </widget>
  </widget>
  <resources/>
  <connections>

dlgmutilanguage.cpp

@@ -120,9 +120,9 @@ void DlgMutiLanguage::SetNewLanguage(){
 
     }
     // 提示重启
-    QMessageBox::StandardButton ret = QMessageBox::information(this, tr("提示"),
-                                                               tr("是否重启?"),
-                                                               QMessageBox::Ok);
+    QMessageBox::StandardButton ret =
+            QMessageBox::information(this, tr("提示"),tr("是否重启?"),
+                                     QMessageBox::Ok | QMessageBox::Cancel);
     if (ret == QMessageBox::Ok) {
         sysPara->saveParaToFile();	// 关机前将相关配置保存
         sysPara->saveRFIDPara();

doc/scene模块健壮性更新.md

@@ -0,0 +1,310 @@
+# Scene 模块健壮性更新说明
+
+## 概述
+
+本文档针对 `scene/` 目录下所有类进行健壮性审查，识别出以下几类典型问题：
+
+1. **外部参数输入未校验** — 公共方法接收指针、索引、容器等参数时缺少有效性检查
+2. **空指针解引用风险** — 存储的原始指针在使用前未做 null 检查
+3. **数组/容器越界访问** — 使用索引访问 QVector/QMap 时未验证边界
+4. **缺少错误处理** — 文件操作、类型转换等缺少失败路径处理
+5. **类型安全问题** — QVariant 类型擦除后未做类型校验
+
+---
+
+## 各类问题详细清单
+
+### 1. BarcodeEditor
+
+| 文件 | 问题 | 严重程度 | 建议修复 |
+|------|------|----------|----------|
+| BarcodeEditor.h/cpp | `bindSysPara(SysPara*)` 未校验 nullptr | 高 | 入口处添加 `if (!sysPara) return;` 并记录日志 |
+| BarcodeEditor.cpp | `applyCounterConfigToSysPara()` 直接解引用 `m_sysPara` 无 null 检查 | 高 | 使用前添加 `Q_ASSERT(m_sysPara); if (!m_sysPara) return;` |
+| BarcodeEditor.cpp | `bindViewModel()` 中 `format` 字段通过 `QVariant::value<T>()` 取值，无类型校验 | 中 | 使用 `canConvert<T>()` 先行判断 |
+| BarcodeEditor.cpp | 计数器相关逻辑中 `counterValues` 索引访问无边界检查 | 高 | 访问前检查 `counterValues.size() >= 2` |
+
+---
+
+### 2. CounterEditor
+
+| 文件 | 问题 | 严重程度 | 建议修复 |
+|------|------|----------|----------|
+| CounterEditor.cpp | `bindSysPara(SysPara*)` 未校验 nullptr | 高 | 入口处添加空指针检查 |
+| CounterEditor.cpp | 计数器参数（步长、初始值、最大值）未做范围校验 | 中 | 添加数值范围合法性检查（如步长不为0，最大值>最小值） |
+| CounterEditor.cpp | UI 控件取值后直接使用，未校验转换是否成功 | 低 | `toInt()` 等调用使用带 `ok` 参数的重载 |
+
+---
+
+### 3. DateFormatEditor
+
+| 文件 | 问题 | 严重程度 | 建议修复 |
+|------|------|----------|----------|
+| DateFormatEditor.cpp | `setDateModel(const DateItemModel&)` 未校验 model 内部容器是否为空 | 中 | 检查关键 map 的 size 是否满足预期 |
+| DateFormatEditor.cpp | 日期偏移量输入未做范围限制 | 低 | 限制偏移量在合理范围内（如 ±9999） |
+
+---
+
+### 4. DateReplaceEditor
+
+| 文件 | 问题 | 严重程度 | 建议修复 |
+|------|------|----------|----------|
+| DateReplaceEditor.cpp | `onLineEditReplaceChanged(int i, QString txt)` 中 `mapIdx` 可能为负值 | 中 | 添加 `if (mapIdx < 0) return;` |
+| DateReplaceEditor.cpp | `on_cb_replaceType_currentIndexChanged(int index)` 未校验 index 范围 | 低 | 添加 `if (index < 0 || index > 5) return;` |
+| DateReplaceEditor.cpp | 分页逻辑中 `currPage` 无上下界保护 | 中 | 翻页时 clamp 到 `[0, maxPage]` |
+
+---
+
+### 5. DlgBarcodeFormat
+
+| 文件 | 问题 | 严重程度 | 建议修复 |
+|------|------|----------|----------|
+| DlgBarcodeFormat.cpp | 条码类型索引直接映射到枚举，无范围校验 | 中 | 添加枚举范围检查 |
+| DlgBarcodeFormat.cpp | 条码内容长度未做上限校验 | 中 | 根据条码类型限制最大长度 |
+
+---
+
+### 6. DlgQrcodeFormat
+
+| 文件 | 问题 | 严重程度 | 建议修复 |
+|------|------|----------|----------|
+| DlgQrcodeFormat.cpp | 二维码内容长度未做上限校验 | 中 | 限制输入长度（QR Code 最大约 4296 字符） |
+| DlgQrcodeFormat.cpp | 纠错等级索引未校验 | 低 | 确保 index 在 0-3 范围内 |
+
+---
+
+### 7. ItemCommon
+
+| 文件 | 问题 | 严重程度 | 建议修复 |
+|------|------|----------|----------|
+| ItemCommon.cpp | `generateTxtFromDateItemModel` 中 `monthsMap[month-1]`、`daysMap[day-1]`、`hoursMap[hour]`、`weeksMap[dayOfWeek-1]` 均无边界检查 | **高** | 访问前检查 map/list 的 size 是否足够 |
+| ItemCommon.cpp | `generateTxtFromBarcodeViewModel` 中 `counterValues[0]`/`[1]` 无 size 检查 | **高** | 添加 `if (counterValues.size() < 2) return QString();` |
+| ItemCommon.cpp | 日期格式解析中未处理无效 datetime 的情况 | 中 | 检查 `QDateTime::isValid()` |
+
+---
+
+### 8. ItemGeneralSettings
+
+| 文件 | 问题 | 严重程度 | 建议修复 |
+|------|------|----------|----------|
+| ItemGeneralSettings.cpp | `bindItem(QGraphicsItem*)` 未校验 nullptr | 高 | 入口处添加空指针检查 |
+| ItemGeneralSettings.cpp | 坐标/尺寸输入未做负值或零值校验 | 中 | 宽高不允许为0或负数 |
+| ItemGeneralSettings.cpp | `dynamic_cast` 结果未检查 | 中 | 转换后检查是否为 nullptr |
+
+---
+
+### 9. picscene (PicScene)
+
+| 文件 | 问题 | 严重程度 | 建议修复 |
+|------|------|----------|----------|
+| picscene.cpp | 多处 `dynamic_cast` 后直接使用结果，未检查 nullptr | **高** | 每次 `dynamic_cast` 后添加 null 检查 |
+| picscene.cpp | `addItem` 系列方法中传入的参数（如文本内容、位置坐标）未校验 | 中 | 校验坐标在场景范围内，文本非空 |
+| picscene.cpp | 场景 item 列表遍历中假设 item 类型，未做防御性检查 | 中 | 遍历时使用 `qgraphicsitem_cast` 并检查结果 |
+| picscene.cpp | 文件读写操作缺少错误处理（如文件打开失败） | 中 | 检查 `QFile::open()` 返回值 |
+
+---
+
+### 10. piccodeitem (PicCodeItem)
+
+| 文件 | 问题 | 严重程度 | 建议修复 |
+|------|------|----------|----------|
+| piccodeitem.cpp | `updateVariants(QVector<int> counters)` 未校验 `counters.size() >= 2` | **高** | 添加 `if (counters.size() < 2) return defaultImage;` |
+| piccodeitem.cpp | `setBarcodeViewModel(const BarcodeViewModel& vm)` 未校验 vm 字段有效性 | 中 | 检查 `vm.type` 和 `vm.contentPattern` 非空 |
+| piccodeitem.cpp | `setSource(QVariant var)` 参数被完全忽略 | 低 | 添加注释说明或移除无用参数 |
+
+---
+
+### 11. PicCounterItem
+
+| 文件 | 问题 | 严重程度 | 建议修复 |
+|------|------|----------|----------|
+| PicCounterItem.cpp | `updateVariants(QVector<int> counters)` 未校验容器大小 | 高 | 同 piccodeitem |
+| PicCounterItem.cpp | 计数器溢出未处理（超过最大值后的行为） | 中 | 添加溢出保护逻辑 |
+
+---
+
+### 12. PicDateItem
+
+| 文件 | 问题 | 严重程度 | 建议修复 |
+|------|------|----------|----------|
+| PicDateItem.cpp | `setDateModel(const DateItemModel&)` 未校验 model 内部 map 完整性 | 高 | 检查各 map 的 size 满足最低要求 |
+| PicDateItem.cpp | 日期替换表访问无边界保护 | 高 | 同 ItemCommon 中的修复 |
+
+---
+
+### 13. PicImageItem
+
+| 文件 | 问题 | 严重程度 | 建议修复 |
+|------|------|----------|----------|
+| PicImageItem.cpp | `setSource(QVariant var)` 未校验 QVariant 类型 | 低 | 使用 `var.canConvert<QString>()` 判断 |
+| PicImageItem.cpp | `setCustomAttrs` 未检查 "source" 属性是否存在 | 低 | 添加 `attrs.contains("source")` 检查 |
+| PicImageItem.cpp | 图片加载失败无日志输出 | 低 | 添加 `qWarning()` 日志 |
+
+---
+
+### 14. PicScheduleShiftItem
+
+| 文件 | 问题 | 严重程度 | 建议修复 |
+|------|------|----------|----------|
+| PicScheduleShiftItem.cpp | `findScheduleName()` 存在不可达代码 | 低 | 清理逻辑 |
+| PicScheduleShiftItem.cpp | `itemImage()` 中存在未赋值的 QImage 返回路径 | 中 | 确保所有分支都有有效返回 |
+
+---
+
+### 15. pictextitem (PicTextItem)
+
+| 文件 | 问题 | 严重程度 | 建议修复 |
+|------|------|----------|----------|
+| pictextitem.cpp | 文本内容设置未做长度上限校验 | 低 | 根据打印能力限制最大字符数 |
+| pictextitem.cpp | 字体大小设置未做合理范围校验 | 低 | 限制在合理范围（如 1-999） |
+
+---
+
+### 16. ViewModels
+
+| 文件 | 问题 | 严重程度 | 建议修复 |
+|------|------|----------|----------|
+| ViewModels.cpp | `makeCounterVM(SysPara*, ...)` 接收指针但部分路径未检查 null | 中 | 统一在入口处检查 |
+| ViewModels.cpp | ViewModel 构造时未校验字段合法性 | 低 | 添加工厂方法中的断言 |
+
+---
+
+### 17. ScheduleShiftsEditor
+
+| 文件 | 问题 | 严重程度 | 建议修复 |
+|------|------|----------|----------|
+| ScheduleShiftsEditor.cpp | 班次时间输入未校验逻辑合理性（如结束时间>开始时间） | 中 | 添加时间区间合法性校验 |
+| ScheduleShiftsEditor.cpp | 班次数量未做上限限制 | 低 | 限制最大班次数 |
+
+---
+
+### 18. myview / sceneviewwidget
+
+| 文件 | 问题 | 严重程度 | 建议修复 |
+|------|------|----------|----------|
+| myview.cpp | 缩放因子未做范围限制 | 低 | 限制在合理范围（如 0.1 ~ 10.0） |
+| sceneviewwidget.cpp | `setScene(PicScene*)` 未校验 nullptr | 中 | 添加空指针检查 |
+
+---
+
+## 修复优先级建议
+
+### P0 — 立即修复（可能导致崩溃）
+
+1. **所有 `bindSysPara(SysPara*)` 调用处** — 添加 nullptr 检查
+2. **`ItemCommon::generateTxtFromDateItemModel`** — 所有 map 索引访问添加边界检查
+3. **`ItemCommon::generateTxtFromBarcodeViewModel`** — counterValues size 检查
+4. **`PicCodeItem::updateVariants`** — counters 容器大小校验
+5. **`picscene.cpp` 中所有 `dynamic_cast`** — 添加 null 检查
+
+### P1 — 尽快修复（可能导致数据错误）
+
+1. DateReplaceEditor 分页索引保护
+2. 条码/二维码内容长度限制
+3. ItemGeneralSettings 中 `dynamic_cast` 结果检查
+4. PicDateItem 日期替换表边界保护
+5. ScheduleShiftsEditor 时间区间合法性校验
+
+### P2 — 后续优化（改善代码质量）
+
+1. QVariant 类型安全检查
+2. 日志输出完善
+3. 无用参数清理
+4. 数值输入范围限制
+
+---
+
+## 修复模式参考
+
+### 模式 A：指针参数校验
+
+```cpp
+// 修复前
+void BarcodeEditor::bindSysPara(SysPara *sysPara)
+{
+    m_sysPara = sysPara;
+}
+
+// 修复后
+void BarcodeEditor::bindSysPara(SysPara *sysPara)
+{
+    if (!sysPara) {
+        qWarning() << "BarcodeEditor::bindSysPara: null pointer passed";
+        return;
+    }
+    m_sysPara = sysPara;
+}
+```
+
+### 模式 B：容器索引边界检查
+
+```cpp
+// 修复前
+auto val = m_currCounterValues[0];
+
+// 修复后
+if (m_currCounterValues.size() < 2) {
+    qWarning() << "counterValues size insufficient:" << m_currCounterValues.size();
+    return QImage();
+}
+auto val = m_currCounterValues[0];
+```
+
+### 模式 C：Map 访问保护
+
+```cpp
+// 修复前
+result.replace("{M}", model.monthsMap[month - 1]);
+
+// 修复后
+if (month - 1 >= 0 && month - 1 < model.monthsMap.size()) {
+    result.replace("{M}", model.monthsMap[month - 1]);
+} else {
+    qWarning() << "monthsMap index out of range:" << month - 1;
+}
+```
+
+### 模式 D：dynamic_cast 安全使用
+
+```cpp
+// 修复前
+auto* textItem = dynamic_cast<PicTextItem*>(item);
+textItem->setText(content);
+
+// 修复后
+auto* textItem = dynamic_cast<PicTextItem*>(item);
+if (!textItem) {
+    qWarning() << "dynamic_cast to PicTextItem failed";
+    return;
+}
+textItem->setText(content);
+```
+
+### 模式 E：数值范围校验
+
+```cpp
+// 修复前
+void ItemGeneralSettings::setWidth(int w)
+{
+    item->setWidth(w);
+}
+
+// 修复后
+void ItemGeneralSettings::setWidth(int w)
+{
+    if (w <= 0 || w > MAX_ITEM_WIDTH) {
+        qWarning() << "Invalid width:" << w;
+        return;
+    }
+    item->setWidth(w);
+}
+```
+
+---
+
+## 实施计划
+
+1. **第一阶段**：修复所有 P0 问题（防崩溃）
+2. **第二阶段**：修复所有 P1 问题（防数据错误）
+3. **第三阶段**：完成 P2 优化（代码质量提升）
+
+每个阶段修复后需进行编译验证和基本功能回归测试。

fileManage/FileManageWidget.cpp

@@ -207,8 +207,8 @@ void FileManageWidget::copyFiles(QListWidget *from, QListWidget *to)
 
 void FileManageWidget::applyStyleSheet()
 {
-    QString styleSheet = R"(
-
+    QString styleSheet =
+            R"(
             QPushButton#closeBtn {
             background-color: #E6F7FF;
             border: 1px solid #87CEEB;
@@ -230,7 +230,7 @@ void FileManageWidget::applyStyleSheet()
             border: 1px solid #000000;
             border-radius: 3px;
             font-size: 18px;
-            width: 100px;
+            width: 150px;
             height: 50px;
             }
 

fileManage/FileManageWidget.ui

@@ -85,8 +85,24 @@
        <widget class="QWidget" name="widget_4" native="true">
         <layout class="QHBoxLayout" name="horizontalLayout_2">
          <property name="leftMargin">
-          <number>50</number>
+          <number>0</number>
          </property>
+         <property name="rightMargin">
+          <number>0</number>
+         </property>
+         <item>
+          <spacer name="horizontalSpacer_6">
+           <property name="orientation">
+            <enum>Qt::Horizontal</enum>
+           </property>
+           <property name="sizeHint" stdset="0">
+            <size>
+             <width>40</width>
+             <height>20</height>
+            </size>
+           </property>
+          </spacer>
+         </item>
          <item>
           <widget class="QPushButton" name="exportBtn">
            <property name="text">

image.qrc

@@ -1014,7 +1014,6 @@
         <file>image/start.png</file>
         <file>image/stop.png</file>
         <file>image/text.png</file>
-        <file>image/tool.png</file>
         <file>image/uk_flag.png</file>
         <file>image/ALARMYellow.PNG</file>
         <file>image/ALARMRed.PNG</file>
@@ -1036,6 +1035,7 @@
         <file>image/set3.png</file>
         <file>image/down_white.png</file>
         <file>image/up_white.png</file>
-        <file>styles.qss</file>
+        <file>image/RePipeClose.png</file>
+        <file>image/RePipeOpen.png</file>
     </qresource>
 </RCC>

mainwidget.cpp

@@ -75,6 +75,7 @@ MainWidget::MainWidget(QWidget* parent)
 
     changeHighLight(false);
     enablePrintButton(false);
+
 }
 
 MainWidget::~MainWidget()
@@ -235,7 +236,7 @@ void MainWidget::checkForPowerOff(){
                         sysPara->devOp->controlInkValve(false);
                         sysPara->devOp->controlInkValvePWM(false);
                     }
-//                    this->setRunStatus(tr("正在准备关机,请等待%1秒...............").arg(i*2)); hlp
+                    this->setRunStatus(tr("正在准备关机,请等待%1秒...").arg(i*2));
                     MySleep(2000);
                 }
             }
@@ -268,7 +269,7 @@ void MainWidget::checkForPowerOff(){
                 {
                     if(i==13)
                         sysPara->devOp->controlReclaimTankOpen(false);
-//                    this->setRunStatus(tr("正在准备关机,请等待%1秒...............").arg(i*3)); hlp
+                    this->setRunStatus(tr("正在准备关机,请等待%1秒...").arg(i*3));
                     MySleep(3000);
                 }
             }
@@ -294,7 +295,7 @@ void MainWidget::checkForPowerOff(){
                         sysPara->para.gearPumpValue = 0;
                         sysPara->devOp->WriteMoterPump();
                     }
-//                    this->setRunStatus(tr("正在准备关机,请等待%1秒...............").arg(i*3)); hlp
+                    this->setRunStatus(tr("正在准备关机,请等待%1秒...").arg(i*3));
                     MySleep(3000);
                 }
             }
@@ -303,8 +304,8 @@ void MainWidget::checkForPowerOff(){
         sysPara->para.gearPumpValue=gearPumpValue_backup;
         sysPara->para.reclaimPumpPWMWidth = reclaimPumpPWMWidth_backup;
         sysPara->devOp->controlCompressPump(false);
-//        setRunStatus(tr("准备关机......")); hlp
-        qDebug()<<"准备关机";
+        setRunStatus(tr("准备关机..."));
+
         sysPara->para.totalProductCnt +=sysPara->status.totalProductCnt;
         sysPara->devOp->clearProductCnt(3 | 0x10);//总产器计数器立即清零
         sysPara->para.ReadFileErrorCnt=0;
@@ -328,7 +329,7 @@ static int numOfPowerOffCMD = 0;
 void MainWidget::sendPowerOffCmd(){
     if(++numOfPowerOffCMD == 6){
         sysPara->devOp->color_flag = 2;
-//        setRunStatus(tr("关机失败!!!")); hlp
+        setRunStatus(tr("关机失败!!!"));
         timerPowerOff->stop();
         numOfPowerOffCMD = 0;
         return;
@@ -618,7 +619,7 @@ void MainWidget::PreviewPressed(){
             // var
             //qDebug() <<"VarNum"<<TempVarNum;
             if(TempVarNum>8){
-//                setRunStatus(tr("变量数大于8个，某些变量将不起作用!!!")); hlp
+                setRunStatus(tr("变量数大于8个，某些变量将不起作用!!!"));
                 strTitle=  tr("变量数大于8个，某些变量将不起作用!!!");
                 strTitle.append("\r\n");
                 strTitle.append(tr("请减少信息中的变量(或计数器)数量."));
@@ -846,17 +847,7 @@ void MainWidget::ontextEdittextChanged()
 
 
 void MainWidget::setRunStatus(QString str){
-//    switch(sysPara->devOp->color_flag){
-//    case 1:
-//        ui.labelRunStatus->setStyleSheet("color:yellow");
-//        break;
-//    case 2:
-//        ui.labelRunStatus->setStyleSheet("color:red");
-//        break;
-//    default:
-//        ui.labelRunStatus->setStyleSheet("color:black");
-//        break;
-//    }
+
     ui.lb_nozzleState->setText(str);
 }
 
@@ -909,13 +900,6 @@ int MainWidget::searchQrVar(){
                         sysPara->para.qrOption.width=sysPara->print.QRvars[varNum].width =  rx.cap(3).toInt(&ok);// *(sysPara->status.addSpace && type==9 ?2:1) ;
                         sysPara->para.qrOption.height =sysPara->print.QRvars[varNum].height = rx.cap(4).toInt(&ok);
                         sysPara->print.QRvars[varNum].startRowPos = sysPara->print.QRvars[varNum].endRowPos-sysPara->print.QRvars[varNum].height;
-
-                        //qDebug()<<"type:"<<varNum<<sysPara->print.QRvars[varNum].type<<sysPara->status.QRvariNum
-                        //         <<sysPara->print.QRvars[varNum].startColPos<<sysPara->print.QRvars[varNum].startRowPos<<sysPara->print.QRvars[varNum].endRowPos
-                        //            <<sysPara->print.QRvars[varNum].width<<sysPara->print.QRvars[varNum].height
-                        //          <<rx.cap(1)<<rx.cap(2)<<rx.cap(3)<<rx.cap(4);
-                        //type: 0 1 1 0 0 21 25  21 "10" "QRV21" "25" "21"
-                        //type: 0 2 1 0 0 12 325 12 "11" "BARV12" "325" "12"
                         varNum++;
                         //break;
                     }
@@ -1656,7 +1640,7 @@ void MainWidget::on_m_StartBtn_clicked()
 
         /*---------------------------------开关回收槽------------------------------*/
         enableReclaimCtrlButton(false);
-//        updatePrintDisplayLabel(); hlp
+        updatePrintDisplayLabel();
         // 20170717 移动此，以观察条形码打印异常问题。
         if(!startPrintingFlag)
         {
@@ -1692,7 +1676,7 @@ void MainWidget::on_m_StopBtn_clicked()
         enableReclaimCtrlButton(true);
         printintFlag = false;
         startPrintingFlag = false;
-//        updatePrintDisplayLabel(); hlp
+        updatePrintDisplayLabel();
         sysPara->status. waitHightVolOff = 1;
         sysPara->saveParaToFile();					// 将相关配置保存
 
@@ -1772,6 +1756,25 @@ int MainWidget::getCurrPrintStatus()
     return printStatus;
 }
 
+void MainWidget::setReclaimStatus(bool isOpen, int rate)
+{
+    if (!sysPara->devOp->isReclaimTankOpenEnable()) {
+        QString str = isOpen? tr("停止开启") : tr("停止关闭");
+        setRunStatus(str);
+        return;
+    };
+
+    if (isOpen) {
+        QString str = rate == 100? tr("喷嘴已开启"):tr("喷嘴开启中");
+        ui.lb_RightBtn->setText(str);
+        ui.lb_LeftBtn->setText(tr("喷嘴关闭"));
+    } else {
+        QString str = rate == 0? tr("喷嘴已关闭"):tr("喷嘴关闭中");
+        ui.lb_LeftBtn->setText(str);
+        ui.lb_RightBtn->setText(tr("喷嘴开启"));
+    }
+}
+
 static int mainInkPumpCtrlStatus = 0;
 static int mainInkPumpCtrlCnt = 0;
 //100ms 为单位
@@ -1781,7 +1784,7 @@ void MainWidget::airPushingProcess()
         if (sysPara->status.airPushing) {
             //qDebug()<< "start airPushingProcess "<<sysPara->status.airPushingOnTime;
             // 执行排气 7 秒
-//            setRunStatus(tr("正在排气 ...............")); hlp
+            setRunStatus(tr("正在排气..."));
             ++sysPara->status.airPushingOnTime;
             if(sysPara->status.airPushingOnTime >= 50) {
                 static int delayCount = 0;
@@ -1867,7 +1870,8 @@ void MainWidget::reclaimTanOpen()
     sysPara->devOp->controlReclaimTankOpen(!sysPara->devOp->isReclaimTankOpenEnable());
     sysPara->devOp->highVoltageCtrl(0);		/*回收槽动作的时候务必关高压*/
 //    sysPara->status.reclaimTankstatus = 1;
-    setRunStatus(sysPara->devOp->isReclaimTankOpenEnable()?tr("正在打开回收槽..."):tr("停止打开"));
+//    setRunStatus(sysPara->devOp->isReclaimTankOpenEnable()?tr("正在打开回收槽..."):tr("停止打开"));
+    setReclaimStatus(true, 0);
     if (!sysPara->para.reclaimTankTime) {
 //        LogInfo::setRunStatusText(tr("警告!回收槽开关时间未设置!"));
     }
@@ -1885,8 +1889,7 @@ void MainWidget::reclaimTanOpen()
 void MainWidget::initSheet()
 {
     // 仅当前按钮生效
-    ui.m_StartBtn->setStyleSheet(
-                R"(
+    QString startBtnSheet = R"(
                        QPushButton {
                        background-color: #1e8449;
                        color: black;
@@ -1897,10 +1900,11 @@ void MainWidget::initSheet()
                        color: #7f8c8d;            /* 灰色文字 */
                        border: 1px solid #95a5a6; /* 灰色边框 */
                        }
-                )");
+                       )";
 
-    ui.m_StopBtn->setStyleSheet(
-                R"(
+    ui.m_StartBtn->setStyleSheet(startBtnSheet);
+
+    QString stopBtnSheet =  R"(
                             QPushButton {
                             background-color: #e74c3c;
                             color: black;
@@ -1911,7 +1915,27 @@ void MainWidget::initSheet()
                             color: #7f8c8d;            /* 灰色文字 */
                             border: 1px solid #95a5a6; /* 灰色边框 */
                             }
-                )");
+                            )";
+
+    ui.m_StopBtn->setStyleSheet(stopBtnSheet);
+
+    QString btnSheet =  R"(
+                            QPushButton:disabled {
+                            background-color: #bdc3c7;  /* 灰色背景 */
+                            color: #7f8c8d;            /* 灰色文字 */
+                            border: 1px solid #95a5a6; /* 灰色边框 */
+                            }
+                            )";
+    ui.m_RightBtn->setStyleSheet(btnSheet);
+    ui.m_LeftBtn->setStyleSheet(btnSheet);
+
+    QString lbSheet = R"(
+                      QLabel {
+                      border: 1px solid #95a5a6; /* 灰色边框 */
+                      }
+                      )";
+    ui.lb_LeftBtn->setStyleSheet(lbSheet);
+    ui.lb_RightBtn->setStyleSheet(lbSheet);
 
 }
 
@@ -2022,7 +2046,8 @@ void MainWidget::on_m_LeftBtn_clicked()
         enablePrintButton(SIMULATE_PRINTING_MODE);
         sysPara->devOp->highVoltageCtrl(0);
 //        sysPara->status.reclaimTankstatus = 2;
-        setRunStatus(sysPara->devOp->isReclaimTankCloseEnable()?tr("正在关闭回收槽..."):tr("停止关闭"));
+//        setRunStatus(sysPara->devOp->isReclaimTankCloseEnable()?tr("正在关闭回收槽..."):tr("停止关闭"));
+        setReclaimStatus(false, 100);
         if(!sysPara->para.reclaimTankTime){
 //            LogInfo::setRunStatusText(tr("警告!回收槽开关时间未设置!"));
         }
@@ -2695,7 +2720,7 @@ void MainWidget::onPreviewScene()
             }
 
             if(TempVarNum>MAX_VARI_NUM){
-//                setRunStatus(tr("变量数大于8个，某些变量将不起作用!!!")); hlp
+                setRunStatus(tr("变量数大于8个，某些变量将不起作用!!!"));
                 strTitle=  tr("变量数大于8个，某些变量将不起作用!!!");
                 strTitle.append("\r\n");
                 strTitle.append(tr("请减少信息中的变量(或计数器)数量."));
@@ -3270,7 +3295,7 @@ void MainWidget::RefreshStatusLight(){//100ms
 //                    on_pushButtonPausePrint_pressed();
                     on_m_StopBtn_clicked();
                     LogInfo::setRunStatusText(tr("高压故障，暂停打印"));
-//                    setRunStatus(tr("高压故障，暂停打印"));hlp
+                    setRunStatus(tr("高压故障，暂停打印"));
 
                     strTitle = tr("高压故障，暂停打印.");
 
@@ -3288,7 +3313,7 @@ void MainWidget::RefreshStatusLight(){//100ms
                         on_m_LeftBtn_clicked();
                         sysPara->status.reclaimTankBlockedAppending=1;
                         LogInfo::setRunStatusText(tr("高压故障，关回收槽"));
-//                        setRunStatus(tr("高压故障，关回收槽和墨线")); hlp
+                        setRunStatus(tr("高压故障，关回收槽和墨线"));
                     }
                     sysPara->status.HVFaultCloseEn=1;
                 }
@@ -3341,10 +3366,10 @@ void MainWidget::RefreshStatusLight(){//100ms
 //                            on_pushButtonReclaimTankClose_pressed();
                             on_m_LeftBtn_clicked();
                             LogInfo::setRunStatusText(tr("回收故障，关闭回收槽，关墨线"));
-//                            setRunStatus(tr("回收故障，关闭回收槽，关墨线")); hlp
+                            setRunStatus(tr("回收故障，关闭回收槽，关墨线"));
                         }
                     }
-//                    else setRunStatus(tr("回收故障.")); hlp
+                    else setRunStatus(tr("回收故障."));
 
                 }
                 else
@@ -3359,32 +3384,22 @@ void MainWidget::RefreshStatusLight(){//100ms
             else if(sysPara->status.lastRecycleWarn)sysPara->status.lastRecycleWarn--;
         }
 
-//        if(ui.labelRunStatus->text().length()<4){
 //        if(startPrintingFlag ){
 //            if(printintFlag)
-//                    setRunStatus(tr("正在喷印..............."));
+//                setRunStatus(tr("正在喷印..."));
 //            else
-//                    setRunStatus(tr("暂停喷印..............."));
+//                setRunStatus(tr("暂停喷印..."));
 //        }
-//        } hlp
+
 
         // 20160620   新增主界面显示：压力，粘度，隔膜位置，晶振电压数，相位
 
-//        ui->labPress->setText(QString("%1/%2").arg(sysPara->status.PRESSURE).arg(sysPara->para.pressure));
-//        ui->labViso->setText(QString("%1/%2").arg(sysPara->status.viscosity).arg(sysPara->para.viscosity) );
         alarmStatus.pressValue = QString("%1/%2").arg(sysPara->status.PRESSURE).arg(sysPara->para.pressure);
         alarmStatus.visoValue = QString("%1/%2").arg(sysPara->status.viscosity).arg(sysPara->para.viscosity);
         if(sysPara->para.gearPumpEnable)
         {
-//            ui->labPosition->setText(QString("%1").arg(sysPara->status.gearPumpRunSpeed));
             alarmStatus.gearPumpRunSpeed = QString("%1").arg(sysPara->status.gearPumpRunSpeed);
         }
-        else
-        {
-//            ui->labPosition->setText(QString("%1/%2").arg(sysPara->status.SEPTAL_POSITION).arg(sysPara->para.septalPostion) );
-        }
-//        ui->labOscVol->setText(QString::number(sysPara->status.HV_DETOUT) + "/" + QString::number(sysPara->para.maxHighVoltageDAC));
-//        ui->label_size->setText(tr("%1/%2/%3").arg(sysPara->status.sizeFPGA).arg(sysPara->status.sizequeueFPGA).arg(sysPara->status.sizeSTM32));
 
         alarmStatus.highVol = QString::number(sysPara->status.HV_DETOUT) + "/" + QString::number(sysPara->para.maxHighVoltageDAC);
         alarmStatus.dataSize = QString("%1/%2/%3").arg(sysPara->status.sizeFPGA).arg(sysPara->status.sizequeueFPGA).arg(sysPara->status.sizeSTM32);
@@ -3396,9 +3411,6 @@ void MainWidget::RefreshStatusLight(){//100ms
 bool MainWidget::updatePhaseIndicatorLight(){
     if(sysPara==0) return 0;
 
-//    if(dlgMyWarringShowDlyCnt)dlgMyWarringShowDlyCnt--;
-//    if(dlgMyWarringShowDlyCnt==1) dlgMyWarring.hide();
-
     /*------------------------------------------喷头盖未关或回收槽未全部打开的时候不报相位故障-------------------------------------------------*/
     if((!sysPara->status.flight_tm_error && !sysPara->status.detect_phase_error) || (sysPara->status.statWarn & WARN_STATUS_HDINT) || !sysPara->status.reclainTankReachEnd){
         //故障后必须等手动按故障恢复才会继续
@@ -3416,7 +3428,6 @@ bool MainWidget::updatePhaseIndicatorLight(){
             sysPara->status.phaseErrorCnt ++ ;
         else {
             if(!sysPara->status.lastPhaseFault){
-//                ui->labelStatusChargefault->setPixmap(QPixmap(QString::fromUtf8(":/image/ALARMRed.PNG")));
                  alarmStatus.chargeFault = DEV_STATUS_RED;
                 sysPara->status.lastPhaseFault = 1;
                 if(sysPara->status.flight_tm_error)
@@ -3434,7 +3445,7 @@ bool MainWidget::updatePhaseIndicatorLight(){
                     sysPara->status.powerOffAfterPhaseFaultAppending = 1;
                     _on_pushButtonPowerOff_pressed(false);
                     LogInfo::setRunStatusText(tr("相位故障，准备关机"));
-//                    setRunStatus(tr("相位故障，准备关机"));hlp
+                    setRunStatus(tr("相位故障，准备关机"));
                     strTitle = tr("相位故障，准备关机");
 
 
@@ -3446,7 +3457,7 @@ bool MainWidget::updatePhaseIndicatorLight(){
 //                        on_pushButtonPausePrint_pressed();
                         on_m_StopBtn_clicked();
                         LogInfo::setRunStatusText(tr("相位故障，暂停打印"));
-//                        setRunStatus(tr("相位故障，暂停打印")); hlp
+                        setRunStatus(tr("相位故障，暂停打印"));
                         strTitle = tr("相位故障，暂停打印");
 
                     }
@@ -3455,7 +3466,7 @@ bool MainWidget::updatePhaseIndicatorLight(){
                     sysPara->devOp->printCtrl(PRINT_CTRL_DAC_DISABLE);
                     sysPara->status.DACDisable = true;
                     LogInfo::setRunStatusText(tr("相位故障，屏蔽DAC输出"));
-//                    setRunStatus(tr("相位故障，屏蔽充电")); hlp
+                    setRunStatus(tr("相位故障，屏蔽充电"));
                     strTitle = tr("相位故障，屏蔽充电");
 
                 }
@@ -3469,7 +3480,7 @@ bool MainWidget::updatePhaseIndicatorLight(){
 bool MainWidget::eventFilter(QObject *watched, QEvent *event)
 {
     if (event->type() == QEvent::MouseButtonDblClick) {
-        //todo 双击事件，设置总数xxx，打印该数量后停止
+        //双击事件，设置总数xxx，打印该数量后停止
         if (watched == ui.sub3 || watched == ui.labelProductCnt) {
             if (m_setNumDlg) {
                 m_setNumDlg->show();
@@ -3495,7 +3506,7 @@ void MainWidget::onLabelFaultRusumePressed(){
         sysPara->status.compressPumpError = false;
         sysPara->status.compressPumpRunTmCnt = 0;
         sysPara->devOp->resumeFault();
-//        ui.labelRunStatus->clear(); hlp
+        ui.lb_nozzleState->clear();
         sysPara->status.beeperOnFlag = false;
         sysPara->devOp->controlBeeper(false);
         sysPara->status.heaterONTimeCnt = 0;		//加热块计数清零

mainwidget.h

@@ -80,6 +80,12 @@ public:
     void enableReclaimCtrlButton(bool);
     void enablePrintButton(bool);
     int getCurrPrintStatus();
+    /**
+     * @brief 设置回收槽开关状态
+     * @param isOpen true：开；false：关
+     * @param rate 回收槽开启程度，0~100；
+     */
+    void setReclaimStatus(bool isOpen, int rate = 0);
 
     void updateSysStatusToUI();		//重载
     //Mainwindow获取机器总状态

runtimectrl.cpp

@@ -0,0 +1,176 @@
+#include "LogInfo.h"
+#include "runtimectrl.h"
+
+#include <QFileInfo>
+
+RunTimeCtrl::RunTimeCtrl()
+{
+    init();
+}
+
+RunTimeCtrl::~RunTimeCtrl()
+{
+    m_checkTimer->stop();
+    m_alertTimer->stop();
+    delete m_checkTimer;
+    delete m_alertTimer;
+}
+
+void RunTimeCtrl::start()
+{
+    slt_checkRunTime();
+    m_checkTimer->start(1000 * 60 * 5);
+    m_runTimer->start(1000);
+}
+
+void RunTimeCtrl::stop()
+{
+    m_checkTimer->stop();
+    m_alertTimer->stop();
+    m_runTimer->stop();
+}
+
+void RunTimeCtrl::setAlertInterval(qint64 minutes)
+{
+    if (minutes > 0) {
+           m_alertIntervalMinutes = minutes;
+           m_alertTimer->stop();
+           m_alertTimer->start(m_alertIntervalMinutes * 60 * 1000);
+    }
+}
+
+qint64 RunTimeCtrl::getElapsedSeconds() const
+{
+    return m_elapsedSeconds;
+}
+
+qint64 RunTimeCtrl::getTotalSeconds() const
+{
+    return m_totalSeconds;
+}
+
+//5min
+void RunTimeCtrl::slt_checkRunTime()
+{
+    // 检查运行时间 || 检查保养时间
+    if (checkRunTime() || checkTimeoutDay()) {
+        // 立即发送第一次提示
+        emit sig_alertTimeout();
+
+        // 启动定时提示器
+        m_alertTimer->start(m_alertIntervalMinutes * 60 * 1000);
+    } else {
+        m_alertTimer->stop();
+    }
+}
+
+void RunTimeCtrl::slt_recodeTime()
+{
+    m_elapsedSeconds++;
+    if (m_elapsedSeconds % 30 == 0) {
+        m_totalSeconds += 30;
+        m_para.runTime += 30;
+        emit sig_saveRunTime();
+
+    }
+}
+
+void RunTimeCtrl::init()
+{
+    m_checkTimer = new QTimer(this);
+    m_alertTimer = new QTimer(this);
+    m_runTimer  = new QTimer(this);
+
+    // 每5分钟1次,检查运行时间
+    connect(m_checkTimer, &QTimer::timeout, this, &RunTimeCtrl::slt_checkRunTime);
+    // 每 m_alertIntervalMinutes 分钟一次消息框提示
+    connect(m_alertTimer, &QTimer::timeout, this, &RunTimeCtrl::sig_alertTimeout);
+    // 每30s，记录一次总时间
+    connect(m_runTimer, &QTimer::timeout, this, &RunTimeCtrl::slt_recodeTime);
+}
+
+bool RunTimeCtrl::checkRunTime()
+{
+    // 甲方要求提示越来越频繁
+    // 168h 72h 24h
+    int runHours = m_totalSeconds/60.0/60.0;
+    if (runHours + 24 >= m_para.maintenanceHours) {
+        setAlertInterval(15); //15min
+        return true;
+    }
+    if (runHours + 72 >= m_para.maintenanceHours) {
+        setAlertInterval(60); //1h
+        return true;
+    }
+    if (runHours + 168 >= m_para.maintenanceHours) {
+        setAlertInterval(1); //3h
+        return true;
+    }
+    return false;
+}
+
+bool RunTimeCtrl::checkTimeoutDay()
+{
+    return (timeoutDay < 30);
+}
+
+// 读配置 初始化的时候调用
+void RunTimeCtrl::loadConfig(RFIDPara_t* para)
+{
+    QDate curDate = QDate::currentDate();
+    unsigned int curDateInt = curDate.toString("yyMMdd").toInt();
+    // 第一次初始化
+    if(para->maintenanceDate == 0){
+        para->maintenanceDate = curDateInt;
+        para->maintenanceInterval = 6;
+        QDate mtEndDate = curDate.addMonths(para->maintenanceInterval);
+        para->maintenanceEndDate = mtEndDate.toString("yyMMdd").toInt();
+        para->runTime = 0;
+        para->maintenanceHours = 3000;
+    }
+    // 结束维护的天数
+    QString mtEndDatestr = "20" + QString::number(para->maintenanceEndDate);
+    QDate mtEndDate = QDate::fromString(mtEndDatestr,"yyyyMMdd");
+    timeoutDay = curDate.daysTo(mtEndDate);
+
+    LogInfo::setRunStatusText(tr("mtDate: %1").arg(para->maintenanceDate));
+    LogInfo::setRunStatusText(tr("mtInterval: %1").arg(para->maintenanceInterval));
+    LogInfo::setRunStatusText(tr("mtEndDate: %1").arg(para->maintenanceEndDate));
+    LogInfo::setRunStatusText(tr("mtFlag: %1").arg(para->needMaintenance));
+    LogInfo::setRunStatusText(tr("timeoutDay: %1").arg(timeoutDay));
+    LogInfo::setRunStatusText(tr("runTime: %1").arg(para->runTime));
+    LogInfo::setRunStatusText(tr("maintenanceHours: %1").arg(para->maintenanceHours));
+    if(timeoutDay <= 0 && !para->needMaintenance)
+        para->needMaintenance = true;
+
+    emit sig_updateTimeoutDay(timeoutDay);
+
+    m_para = *para;
+    m_totalSeconds = para->runTime;
+}
+
+void RunTimeCtrl::updatePara(RFIDPara_t* para)
+{
+    QString mtDatestr = QString::number(para->maintenanceDate);
+    QDate mtDate = QDate::fromString(mtDatestr,"yyMMdd");
+    QDate mtEndDate = mtDate.addMonths(para->maintenanceInterval);  // 结束维护日期
+
+    para->maintenanceEndDate = mtEndDate.toString("yyMMdd").toInt();
+    LogInfo::setRunStatusText(tr("mtDate1: %1").arg(para->maintenanceDate));
+    LogInfo::setRunStatusText(tr("mtInterval1: %1").arg(para->maintenanceInterval));
+    LogInfo::setRunStatusText(tr("mtEndDate1: %1").arg(para->maintenanceEndDate));
+    LogInfo::setRunStatusText(tr("mtFlog1: %1").arg(para->needMaintenance));
+
+    m_para = *para;
+}
+
+void RunTimeCtrl::authorizationAccepted(RFIDPara_t* para)
+{
+    para->maintenanceDate = m_para.maintenanceDate;
+    para->maintenanceInterval = m_para.maintenanceInterval;
+    para->maintenanceEndDate = m_para.maintenanceEndDate;
+    para->runTime = m_para.runTime;
+    para->maintenanceHours = m_para.maintenanceHours;
+    updatePara(para);
+}
+

runtimectrl.h

@@ -0,0 +1,86 @@
+#ifndef RUNTIMECTRL_H
+#define RUNTIMECTRL_H
+
+#include <QDateTime>
+#include <QObject>
+#include <QTimer>
+#include <QSettings>
+#include "SysPara.h"
+
+/**
+    当前类用于统计软件运行时间、到期提醒间隔
+    设备保养提醒
+*/
+class RunTimeCtrl : public QObject
+{
+    Q_OBJECT
+
+public:
+    static RunTimeCtrl* instance() {
+        static RunTimeCtrl ins;
+        return &ins;
+    }
+
+    ~RunTimeCtrl();
+
+    // 启动计时
+    void start();
+
+    // 停止计时
+    void stop();
+
+    // 设置提示间隔（单位：分钟，默认5分钟）
+    void setAlertInterval(qint64 minutes);
+
+    // 获取本次运行时间（秒）
+    qint64 getElapsedSeconds() const;
+
+    // 获取已运行时间（秒）
+    qint64 getTotalSeconds() const;
+
+    // 初始化加载参数
+    void loadConfig(RFIDPara_t* para);
+
+    // 更新参数
+    void updatePara(RFIDPara_t* para);
+
+    // 授权时
+    void authorizationAccepted(RFIDPara_t* para);
+signals:
+    void sig_alertTimeout();
+
+    void sig_updateTimeoutDay(int days);
+
+    void sig_saveRunTime();
+
+private slots:
+    void slt_checkRunTime();
+    void slt_recodeTime();
+
+private:
+    RunTimeCtrl();
+
+    QTimer *m_checkTimer = nullptr;      // 检查计时器
+    QTimer *m_alertTimer = nullptr;      // 提示计时器
+    QTimer *m_runTimer = nullptr;        // 运行计时器，记录运行时间和更新总时间
+    QDateTime m_startTime;               // 开始时间
+    QDateTime m_stopTime;                // 停止时间
+    unsigned int m_stopTimeHours = 0;    // 停止时间（小时）
+    int m_alertIntervalMinutes = 180;      // 提示间隔（分钟）
+    bool m_isAlter = false;              // 启动提示计时器标志
+    quint64 m_elapsedSeconds = 0;        // 本次运行的时间
+    quint64 m_totalSeconds = 0;          // 总运行时间 30s更新一次
+
+    // todo 后续一个相关功能建立一个结构体和独立定时器
+
+    RFIDPara_t m_para;
+    int timeoutDay = 0;
+
+    void init();
+
+    bool checkRunTime();
+
+    bool checkTimeoutDay();
+};
+
+#endif // RUNTIMECTRL_H

scene/BarcodeEditor.cpp

@@ -87,7 +87,16 @@ BarcodeEditor::~BarcodeEditor()
     delete ui;
 }
 
-void BarcodeEditor::bindViewModel(const BarcodeViewModel& vm)
+void BarcodeEditor::bindSysPara(SysPara *sysPara)
+{
+    if (!sysPara) {
+        qWarning() << "BarcodeEditor::bindSysPara: null pointer passed, ignored";
+        return;
+    }
+    m_sysPara = sysPara;
+}
+
+void BarcodeEditor::bindViewModel(const BarcodeViewModel &vm)
 {
     m_vm = vm;
 
@@ -221,7 +230,7 @@ BarcodeViewModel BarcodeEditor::viewModel()
 
 void BarcodeEditor::restoreViewModel()
 {
-    m_vm.generalSettingsVM = ItemGeneralSettingsVM();
+    m_vm.generalSettingsVM = TextItemModel();
     m_vm.contentPattern = "";
     m_vm.counterViewModel = CounterViewModel();
     m_vm.dateViewModel = DateItemModel::createDefaultReplaceModel();
@@ -239,6 +248,11 @@ void BarcodeEditor::applyCounterConfigToSysPara()
     if(!m_vm.contentPattern.contains("{c}"))
         return;
 
+    if (!m_sysPara) {
+        qWarning() << "BarcodeEditor::applyCounterConfigToSysPara: m_sysPara is null, skipping";
+        return;
+    }
+
     CounterEditorVM cnt = m_counterEditor->viewModel();
     if(cnt.counterType == COUNTER_TYPE_1) {
         m_sysPara->para.cnt1StartValue = cnt.counter1.startValue;

scene/BarcodeEditor.h

@@ -26,7 +26,7 @@ enum BarcodeType {
  *         仅当 contentPattern 含有相应变量时，counterViewModel / dateViewModel 字段才有意义。
  */
 struct BarcodeViewModel {
-    ItemGeneralSettingsVM generalSettingsVM;    // 通用设置视图模型
+    TextItemModel generalSettingsVM;    // 通用设置视图模型
     QString contentPattern;                     // 条形码内容模版，例如 "ABC{t}{c1}"
     CounterViewModel counterViewModel;          // 计数器视图模型
     DateItemModel dateViewModel;                // 日期视图模型
@@ -104,7 +104,7 @@ public:
      * 
      * @param sysPara 
      */
-    void bindSysPara(SysPara* sysPara) { m_sysPara = sysPara; }
+    void bindSysPara(SysPara* sysPara);
 
     /**
      * @brief 注入条形码视图模型（纯结构体，按值拷贝）

scene/DlgBarcodeFormat.ui

@@ -126,7 +126,7 @@ QSpinBox::down-arrow {
   <widget class="QSpinBox" name="BarCodeScale">
    <property name="geometry">
     <rect>
-     <x>300</x>
+     <x>280</x>
      <y>150</y>
      <width>60</width>
      <height>31</height>
@@ -173,9 +173,9 @@ QSpinBox::down-arrow {
   <widget class="QComboBox" name="BarCodeDot">
    <property name="geometry">
     <rect>
-     <x>190</x>
-     <y>150</y>
-     <width>71</width>
+     <x>70</x>
+     <y>230</y>
+     <width>111</width>
      <height>31</height>
     </rect>
    </property>
@@ -213,10 +213,10 @@ QSpinBox::down-arrow {
   <widget class="QCheckBox" name="checkBoxAddText">
    <property name="geometry">
     <rect>
-     <x>330</x>
-     <y>240</y>
-     <width>83</width>
-     <height>16</height>
+     <x>280</x>
+     <y>230</y>
+     <width>150</width>
+     <height>31</height>
     </rect>
    </property>
    <property name="sizePolicy">
@@ -240,7 +240,7 @@ QSpinBox::down-arrow {
     <rect>
      <x>70</x>
      <y>150</y>
-     <width>71</width>
+     <width>111</width>
      <height>31</height>
     </rect>
    </property>
@@ -248,9 +248,9 @@ QSpinBox::down-arrow {
   <widget class="QComboBox" name="comboBoxInkColor">
    <property name="geometry">
     <rect>
-     <x>300</x>
+     <x>280</x>
      <y>70</y>
-     <width>81</width>
+     <width>111</width>
      <height>31</height>
     </rect>
    </property>
@@ -271,8 +271,8 @@ QSpinBox::down-arrow {
   <widget class="QLabel" name="label_7">
    <property name="geometry">
     <rect>
-     <x>190</x>
-     <y>120</y>
+     <x>70</x>
+     <y>200</y>
      <width>76</width>
      <height>23</height>
     </rect>
@@ -299,7 +299,7 @@ QSpinBox::down-arrow {
     <rect>
      <x>70</x>
      <y>70</y>
-     <width>140</width>
+     <width>161</width>
      <height>31</height>
     </rect>
    </property>
@@ -319,7 +319,7 @@ QSpinBox::down-arrow {
   <widget class="QLabel" name="lab123">
    <property name="geometry">
     <rect>
-     <x>300</x>
+     <x>280</x>
      <y>40</y>
      <width>76</width>
      <height>23</height>
@@ -335,7 +335,7 @@ QSpinBox::down-arrow {
   <widget class="QLabel" name="label_4">
    <property name="geometry">
     <rect>
-     <x>300</x>
+     <x>280</x>
      <y>120</y>
      <width>129</width>
      <height>23</height>

scene/ItemCommon.cpp

@@ -6,6 +6,7 @@
 #include "BarCode/barcode.h"
 #include <QPainter>
 #include <cstring>
+#include <QDebug>
 
 /**
  * @brief 将libqrencode的QRcode结构渲染成QImage
@@ -308,10 +309,15 @@ static QImage generateBarCodeImage(const QString &content, int barCodeType)
     return generateBarCodeImage(content, vm);
 }
 
-QString generateTxtFromDateItemModel(const DateItemModel &model, const QDateTime &time)
+QString ItemUtils::generateTxtFromDateItemModel(const DateItemModel &model, const QDateTime &time)
 {
     QString result = model.datetimePattern;
 
+    if (!time.isValid()) {
+        qWarning() << "generateTxtFromDateItemModel: invalid QDateTime passed";
+        return result;
+    }
+
     // 应用偏移量
     QDateTime applyDateTime = time;
     if(model.monthsOffset != 0) {
@@ -341,19 +347,37 @@ QString generateTxtFromDateItemModel(const DateItemModel &model, const QDateTime
     // 匹配两位数月份 MM
     i = result.indexOf("MM");
     if(i != -1) {
-        result.replace(i, 2, model.monthsMap[applyDateTime.date().month() - 1]);
+        int monthIdx = applyDateTime.date().month() - 1;
+        if (monthIdx >= 0 && monthIdx < model.monthsMap.size()) {
+            result.replace(i, 2, model.monthsMap[monthIdx]);
+        } else {
+            qWarning() << "generateTxtFromDateItemModel: monthsMap index out of range:" << monthIdx;
+            result.replace(i, 2, QString::number(applyDateTime.date().month()).rightJustified(2, '0'));
+        }
     }
     
     // 匹配两位数日期 dd
     i = result.indexOf("dd");
     if(i != -1) {
-        result.replace(i, 2, model.daysMap[applyDateTime.date().day() - 1]);
+        int dayIdx = applyDateTime.date().day() - 1;
+        if (dayIdx >= 0 && dayIdx < model.daysMap.size()) {
+            result.replace(i, 2, model.daysMap[dayIdx]);
+        } else {
+            qWarning() << "generateTxtFromDateItemModel: daysMap index out of range:" << dayIdx;
+            result.replace(i, 2, QString::number(applyDateTime.date().day()).rightJustified(2, '0'));
+        }
     }
     
     // 匹配两位数小时 HH
     i = result.indexOf("HH");
     if(i != -1) {
-        result.replace(i, 2, model.hoursMap[applyDateTime.time().hour()]);
+        int hourIdx = applyDateTime.time().hour();
+        if (hourIdx >= 0 && hourIdx < model.hoursMap.size()) {
+            result.replace(i, 2, model.hoursMap[hourIdx]);
+        } else {
+            qWarning() << "generateTxtFromDateItemModel: hoursMap index out of range:" << hourIdx;
+            result.replace(i, 2, QString::number(applyDateTime.time().hour()).rightJustified(2, '0'));
+        }
     }
     
     // 匹配两位数分钟 mm
@@ -373,7 +397,13 @@ QString generateTxtFromDateItemModel(const DateItemModel &model, const QDateTime
     // 格式化周几 w
     i = result.indexOf("w");
     if (i != -1) {
-        result.replace(i, 1, model.weeksMap[applyDateTime.date().dayOfWeek() - 1]);
+        int weekIdx = applyDateTime.date().dayOfWeek() - 1;
+        if (weekIdx >= 0 && weekIdx < model.weeksMap.size()) {
+            result.replace(i, 1, model.weeksMap[weekIdx]);
+        } else {
+            qWarning() << "generateTxtFromDateItemModel: weeksMap index out of range:" << weekIdx;
+            result.replace(i, 1, QString::number(applyDateTime.date().dayOfWeek()));
+        }
     }
     
     // 格式化年中周数 c
@@ -386,7 +416,7 @@ QString generateTxtFromDateItemModel(const DateItemModel &model, const QDateTime
 }
 
 
-QString generateTxtFromBarcodeViewModel(const BarcodeViewModel &vm, const std::array<int, 2> counterValues, const QDateTime &time)
+QString ItemUtils::generateTxtFromBarcodeViewModel(const BarcodeViewModel &vm, const std::array<int, 2> counterValues, const QDateTime &time)
 {
     QString txt = vm.contentPattern;
     auto pos = vm.contentPattern.indexOf("{t}");
@@ -424,7 +454,7 @@ QString generateTxtFromBarcodeViewModel(const BarcodeViewModel &vm, const std::a
  *   - BARCODE_TYPE_BARCODE: DlgBarcodeFormatVM（完整配置）或 int（条形码类型索引，使用默认值）
  * @return QImage 生成的图像；失败返回空QImage
  */
-QImage generateBarcodeImage(const QString &content, BarcodeType type, const QVariant &format)
+QImage ItemUtils::generateBarcodeImage(const QString &content, BarcodeType type, const QVariant &format)
 {
     if (content.isEmpty()) {
         return QImage();
@@ -516,7 +546,7 @@ end:
     return img.copy(clipRect);
 }
 
-QImage txtToImage(const QString &txt, const QFont &font, const QColor &fgColor, const QColor &bgColor)
+QImage ItemUtils::txtToImage(const QString &txt, const QFont &font, const QColor &fgColor, const QColor &bgColor)
 {
     if (txt.isEmpty()) {
         return QImage();

scene/ItemCommon.h

@@ -9,7 +9,10 @@
 #include <array>
 #include <QImage>
 
-/**
+
+namespace ItemUtils
+{
+    /**
     * @brief 根据日期视图模型和时间生成字符串
     * @param model 包含日期格式模版和相关配置的视图模型
     * @param time 用于生成字符串的时间
@@ -26,9 +29,9 @@
     * - w: 星期几，支持替换为自定义字符串（通过 model.weeksMap）
     * - c: 年中周数
     */
-QString generateTxtFromDateItemModel(const DateItemModel& model, const QDateTime& time);
+    QString generateTxtFromDateItemModel(const DateItemModel& model, const QDateTime& time);
 
-/**
+    /**
      * @brief 根据条形码视图模型的内容模版生成字符串，
      * 生成的字符串可用于创建条形码或二维码
      * 
@@ -45,9 +48,9 @@ QString generateTxtFromDateItemModel(const DateItemModel& model, const QDateTime
      * @return QString 格式化后的字符串
      * 
      */
-QString generateTxtFromBarcodeViewModel(const BarcodeViewModel& vm, const std::array<int, 2> counterValues, const QDateTime& time);
+    QString generateTxtFromBarcodeViewModel(const BarcodeViewModel& vm, const std::array<int, 2> counterValues, const QDateTime& time);
 
-/**
+    /**
      * @brief 根据条形码类型和内容生成条形码或二维码图像
      * @param content 已格式化的文本内容
      * @param type 条码类型
@@ -60,9 +63,9 @@ QString generateTxtFromBarcodeViewModel(const BarcodeViewModel& vm, const std::a
      * 如果 format 是 int 类型, 对于 QR Code，0 表示 Data Matrix，1 表示 QR Code；对于条形码，int 值对应 DlgBarcodeFormatVM 中 type 的索引。
      * 如果 format 是 int 类型，则使用默认配置并根据 int 值选择二维码或条形码的子类型；如果 format 是对应的 VM 类型，则使用其中的详细配置。
      */
-QImage generateBarcodeImage(const QString& content, BarcodeType type, const QVariant& format);
+    QImage generateBarcodeImage(const QString& content, BarcodeType type, const QVariant& format);
 
-/**
+    /**
      * @brief 将文本转换为图像
      * @param txt 要转换的文本
      * @param font 文本使用的字体
@@ -71,6 +74,6 @@ QImage generateBarcodeImage(const QString& content, BarcodeType type, const QVar
      * @return QImage 转换后的图像
      * @note 返回的字符串图像会裁剪至最小边界以节省空间。例如字符串"aaa"的高度会比"bbbjjj"小，因为前者没有上下行部分。
      */
-QImage txtToImage(const QString& txt, const QFont& font, const QColor& fgColor = Qt::black, const QColor& bgColor = Qt::white);
-
+    QImage txtToImage(const QString& txt, const QFont& font, const QColor& fgColor = Qt::black, const QColor& bgColor = Qt::white);
+}
 #endif // _ITEM_COMMON_H_

scene/ItemGeneralSettings.cpp

@@ -38,7 +38,7 @@ void ItemGeneralSettings::edit(PicTextItem *item)
     m_currItem = item;
     
     // 从item快照创建ViewModel（如果item为空，使用默认值）
-    setViewModel(ItemGeneralSettingsVM::fromItem(item));
+    setViewModel(TextItemModel::fromItem(item));
 }
 
 void ItemGeneralSettings::initUI()
@@ -53,7 +53,7 @@ void ItemGeneralSettings::initUI()
     ui->counterIDSpinBox->setValue(0);
 }
 
-void ItemGeneralSettings::setViewModel(const ItemGeneralSettingsVM &vm)
+void ItemGeneralSettings::setViewModel(const TextItemModel &vm)
 {
     m_vmSnapshot = vm;
     m_vm = vm;

scene/ItemGeneralSettings.h

@@ -11,46 +11,6 @@ namespace Ui {
 class ItemGeneralSettings;
 }
 
-/**
- * @brief 图元通用属性的ViewModel
- * 
- * 目的：解耦UI编辑器与PicTextItem，支持灵活的数据绑定和批量操作。
- * UI修改属性时先更新VM，再决定何时应用到item（实时或延迟）。
- */
-struct ItemGeneralSettingsVM {
-    // 图元类型，用于判断是否显示字间距
-    SourceType sourceType = SourceType::UNKNOWN;
-
-    ItemDirectionType direction = NORMAL;
-    int boldMultiple = 1;
-    int letterSpace = 0;
-    bool colorReversal = false;
-
-    std::function<QImage()> imageGenerator; // 图片生成函数
-    
-    // 便利方法：从PicTextItem快照创建VM
-    static ItemGeneralSettingsVM fromItem(PicTextItem *item) {
-        ItemGeneralSettingsVM vm;
-        if (item) {
-            vm.sourceType = item->sourceType();
-            vm.direction = item->direction();
-            vm.boldMultiple = item->boldMultiple();
-            vm.letterSpace = item->letterSpace();
-            vm.colorReversal = item->colorReversal();
-        }
-        return vm;
-    }
-    
-    // 检查是否有改动
-    bool hasDifference(const ItemGeneralSettingsVM &other) const {
-        return sourceType != other.sourceType ||
-               direction != other.direction || 
-               boldMultiple != other.boldMultiple || 
-               letterSpace != other.letterSpace || 
-               colorReversal != other.colorReversal;
-    }
-};
-
 class ItemGeneralSettings : public QWidget
 {
     Q_OBJECT
@@ -72,14 +32,14 @@ public:
      * 
      * @param vm 
      */
-    void setViewModel(const ItemGeneralSettingsVM& vm);
+    void setViewModel(const TextItemModel& vm);
 
        /**
      * @brief 获取当前ViewModel
      * 
      * 调用者可以检查是否有改动，并决定是否应用
      */
-    ItemGeneralSettingsVM viewModel() const { return m_vm; }
+    TextItemModel viewModel() const { return m_vm; }
     
     /**
      * @brief 将ViewModel的属性应用到指定的PicTextItem
@@ -117,10 +77,10 @@ private:
     PicTextItem* m_currItem = nullptr;
     
     // UI编辑的状态，独立于m_currItem
-    ItemGeneralSettingsVM m_vm;
+    TextItemModel m_vm;
     
     // 初始加载时的VM状态，用于检测改动
-    ItemGeneralSettingsVM m_vmSnapshot;
+    TextItemModel m_vmSnapshot;
     
     QPainter m_painter;
 };

scene/PicDateItem.cpp

@@ -26,7 +26,7 @@ void PicDateItem::setSource(QVariant var)
     if(m_model.datetimePattern.isEmpty())
         return;
 
-    m_currDateTimeStr = generateTxtFromDateItemModel(m_model, QDateTime::currentDateTime());
+    m_currDateTimeStr = ItemUtils::generateTxtFromDateItemModel(m_model, QDateTime::currentDateTime());
     applyModify();
 }
 
@@ -47,13 +47,13 @@ bool PicDateItem::updateDatetimeStr()
         return false;
 
     if(m_currDateTimeStr.isEmpty()) {
-        m_currDateTimeStr = generateTxtFromDateItemModel(m_model, QDateTime::currentDateTime());
+        m_currDateTimeStr = ItemUtils::generateTxtFromDateItemModel(m_model, QDateTime::currentDateTime());
         applyModify();
         return true;
     }
     
     auto now = QDateTime::currentDateTime();
-    auto str = generateTxtFromDateItemModel(m_model, now);
+    auto str = ItemUtils::generateTxtFromDateItemModel(m_model, now);
     if(str == m_currDateTimeStr) {
         return false;
     }

scene/ScheduleShiftsEditor.cpp

@@ -52,22 +52,20 @@ ScheduleShiftsEditor::~ScheduleShiftsEditor()
     delete ui;
 }
 
-void ScheduleShiftsEditor::edit(PicScheduleShiftItem* item)
+void ScheduleShiftsEditor::setItemModel(QVector<ScheduleModel> schedulesModel, TextItemModel txtModel)
 {
-    m_backup.clear();
-    m_generalSettings->edit(item);
-    if(item) {
-        item->saveAttrs(m_backup);
-        m_dataModel = item->schedules();
-    }
-    else {
-        m_dataModel.clear();
-    }
+    m_generalSettings->setViewModel(txtModel);
+    m_dataModel = schedulesModel;
 
     applyDataModel();
 }
 
-const QVector<ScheduleModel>& ScheduleShiftsEditor::dataModel() const
+TextItemModel ScheduleShiftsEditor::textItemModel()
+{
+    return m_generalSettings->viewModel();
+}
+
+const QVector<ScheduleModel>& ScheduleShiftsEditor::scheduleModel() const
 {
     return m_dataModel;
 }
@@ -79,10 +77,6 @@ PicScheduleShiftItem *ScheduleShiftsEditor::currEditItem()
 
 void ScheduleShiftsEditor::onBtnCloseClicked()
 {
-    if(currEditItem()) {
-        currEditItem()->setAttrs(m_backup);
-    }
-
     emit rejected();
 }
 

scene/ScheduleShiftsEditor.h

@@ -35,7 +35,11 @@ public:
 
     void edit(PicScheduleShiftItem* item);
 
-    const QVector<ScheduleModel>& dataModel() const;
+    void setItemModel(QVector<ScheduleModel> schedulesModel, TextItemModel txtModel);
+
+    TextItemModel textItemModel();
+
+    const QVector<ScheduleModel>& scheduleModel() const;
 
     PicScheduleShiftItem* currEditItem();
 
@@ -59,8 +63,6 @@ private:
     Ui::ScheduleShiftsEditor *ui;
     QVector<ScheduleModel> m_dataModel;
     ItemGeneralSettings* m_generalSettings = nullptr;
-
-    QXmlStreamAttributes m_backup;
 };
 
 #endif // SCHEDULESHIFTSEDITOR_H

scene/piccodeitem.cpp

@@ -37,17 +37,23 @@ void PicCodeItem::setBarcodeViewModel(const BarcodeViewModel &vm)
 {
     m_vm = vm;
     m_currCodeTxt = "";
+    setTextItemModel(m_vm.generalSettingsVM);
     updateVariants();
     qInfo() << "Barcode model: \r\n" << qPrintable(BarcodeViewModel::toString(vm));
 }
 
 BarcodeViewModel PicCodeItem::barcodeViewModel()
 {
+    m_vm.generalSettingsVM = textItemModel();
     return m_vm;
 }
 
 bool PicCodeItem::updateVariants(const QVector<int> counters)
 {
+    if (counters.size() < 2) {
+        qWarning() << "PicCodeItem::updateVariants: counters size insufficient:" << counters.size() << ", expected >= 2";
+        return false;
+    }
     m_currCounterValues = counters;
     return updateVariants();
 }
@@ -70,10 +76,15 @@ void PicCodeItem::saveCustomAttrs(QXmlStreamAttributes &attrs)
 
 bool PicCodeItem::updateVariants()
 {
-    auto txt = generateTxtFromBarcodeViewModel(m_vm, {m_currCounterValues[0], m_currCounterValues[1]}, QDateTime::currentDateTime());
+    if (m_currCounterValues.size() < 2) {
+        qWarning() << "PicCodeItem::updateVariants: m_currCounterValues size < 2, cannot generate barcode text";
+        return false;
+    }
+
+    auto txt = ItemUtils::generateTxtFromBarcodeViewModel(m_vm, {m_currCounterValues[0], m_currCounterValues[1]}, QDateTime::currentDateTime());
     if(txt != m_currCodeTxt || m_currCodeTxt.isEmpty()) {
         m_currCodeTxt = txt;
-        m_codeImage = generateBarcodeImage(txt, m_vm.type, m_vm.format);
+        m_codeImage = ItemUtils::generateBarcodeImage(txt, m_vm.type, m_vm.format);
         applyModify();
         return true;
     }

scene/pictextitem.cpp

@@ -300,6 +300,19 @@ QImage PicTextItem::preview()
 {
     return m_itemImage;
 }
+void PicTextItem::setTextItemModel(const TextItemModel &model)
+{
+    setLetterSpace(model.letterSpace);
+    setBoldMultiple(model.boldMultiple);
+    setDirection(model.direction);
+    setColorReversal(model.colorReversal);
+}
+
+TextItemModel PicTextItem::textItemModel()
+{
+    return TextItemModel::fromItem(this);
+}
+
 //! [1]
 QVariant PicTextItem::itemChange(GraphicsItemChange change,
                                  const QVariant &value)
@@ -441,3 +454,16 @@ QPointF PicTextItem::clampItemPos(const QPointF &p)
     return QPointF (std::min(qreal(scene()->width() - boundingRect().width()), std::max(0.0, p.x())),
                    std::min(qreal(scene()->height() - boundingRect().height()), std::max(0.0, p.y())));
 }
+
+TextItemModel TextItemModel::fromItem(PicTextItem *item)
+{
+    TextItemModel vm;
+    if (item) {
+        vm.sourceType = item->sourceType();
+        vm.direction = item->direction();
+        vm.boldMultiple = item->boldMultiple();
+        vm.letterSpace = item->letterSpace();
+        vm.colorReversal = item->colorReversal();
+    }
+    return vm;
+}

scene/pictextitem.h

@@ -42,6 +42,39 @@ enum SourceType{
     COUNTER,
 };
 
+class PicTextItem;
+
+/**
+ * @brief 图元通用属性的ViewModel
+ * 
+ * 目的：解耦UI编辑器与PicTextItem，支持灵活的数据绑定和批量操作。
+ * UI修改属性时先更新VM，再决定何时应用到item（实时或延迟）。
+ */
+struct TextItemModel {
+    // 图元类型，用于判断是否显示字间距
+    SourceType sourceType = SourceType::UNKNOWN;
+
+    ItemDirectionType direction = NORMAL;
+    int boldMultiple = 1;
+    int letterSpace = 0;
+    bool colorReversal = false;
+
+    std::function<QImage()> imageGenerator; // 图片生成函数
+    
+    // 便利方法：从PicTextItem快照创建VM
+    static TextItemModel fromItem(PicTextItem *item);
+    
+    // 检查是否有改动
+    bool hasDifference(const TextItemModel &other) const {
+        return sourceType != other.sourceType ||
+               direction != other.direction || 
+               boldMultiple != other.boldMultiple || 
+               letterSpace != other.letterSpace || 
+               colorReversal != other.colorReversal;
+    }
+};
+
+
 class PicTextItem : public QGraphicsTextItem
 {
     Q_OBJECT
@@ -121,6 +154,10 @@ public:
      */
     QImage preview();
 
+    void setTextItemModel(const TextItemModel& model);
+    
+    TextItemModel textItemModel();
+
 signals:
     void lostFocus(PicTextItem *item);
     void selectedChange(QGraphicsItem *item);

setnumdlg.ui

@@ -11,7 +11,7 @@
    </rect>
   </property>
   <property name="windowTitle">
-   <string>Dialog</string>
+   <string>设置计数器</string>
   </property>
   <widget class="QCheckBox" name="cb_setNum">
    <property name="geometry">

testprintwidget.cpp

@@ -1376,7 +1376,7 @@ void TestPrintWidget::onBtnItemConfigClicked()
 
     if(item->sourceType() == SourceType::SCHEDULE_SHIFT) {
         auto scheduleItem = dynamic_cast<PicScheduleShiftItem*>(item);
-        emit sig_showScheduleShiftsEditor(scheduleItem);
+        emit sig_showScheduleShiftsEditor(scheduleItem->schedules(), scheduleItem->textItemModel());
         return;
     }
 
@@ -1561,7 +1561,7 @@ void TestPrintWidget::addDateTimeItem(const DateItemModel &model)
     item->setModel(model);
 }
 
-void TestPrintWidget::addScheduleShiftsItem(QVector<ScheduleModel> schedules)
+void TestPrintWidget::addScheduleShiftsItem(QVector<ScheduleModel> schedules, TextItemModel txtModel)
 {
     // 如果当前选中了一个日期时间item，则直接设置模型
     auto selectItems = pPicScene->selectedItems();
@@ -1570,6 +1570,7 @@ void TestPrintWidget::addScheduleShiftsItem(QVector<ScheduleModel> schedules)
         if(item->sourceType() == SourceType::SCHEDULE_SHIFT) {
             auto scheduleItem = dynamic_cast<PicScheduleShiftItem*>(item);
             scheduleItem->setSchedules(schedules);
+            scheduleItem->setTextItemModel(txtModel);
             return;
         }
     }
@@ -1584,6 +1585,7 @@ void TestPrintWidget::addScheduleShiftsItem(QVector<ScheduleModel> schedules)
     item->setPos(boundingRect.right(), 0.0);
     item->setSelected(true);
     item->setSchedules(std::move(schedules));
+    item->setTextItemModel(txtModel);
 }
 
 void TestPrintWidget::addCounterItem(CounterViewModel vm, QSharedPointer<QFont> f)
@@ -1654,7 +1656,7 @@ void TestPrintWidget::showBarcodeEditor(bool restoreViewModel)
 void TestPrintWidget::onBtnArrowClicked()
 {
     pPicScene->clearSelection();
-    emit sig_showScheduleShiftsEditor(nullptr);
+    emit sig_showScheduleShiftsEditor(QVector<ScheduleModel>(), TextItemModel());
 }
 
 void TestPrintWidget::on_btn_copy_clicked()

testprintwidget.h

@@ -74,7 +74,7 @@ public:
 
     void addDateTimeItem(const DateItemModel& model);
 
-    void addScheduleShiftsItem(QVector<ScheduleModel> schedules);
+    void addScheduleShiftsItem(QVector<ScheduleModel> schedules, TextItemModel txtModel);
 
     void addCounterItem(CounterViewModel vm, QSharedPointer<QFont> font = nullptr);
 
@@ -216,7 +216,7 @@ signals:
     // 如果item为null，表明是从新建按钮发出的，如果item不为null，表明用户正在尝试编辑一个日期item
     void sig_showEditDataTime(PicDateItem* item);
 
-    void sig_showScheduleShiftsEditor(PicScheduleShiftItem* item);
+    void sig_showScheduleShiftsEditor(QVector<ScheduleModel> schedules, TextItemModel txtModel);
 };
 
 #endif // TESTPRINTWIDGET_H