/*
*
*
*2013-9-15高压报警停止充电
*/

/*
        QMessageBox::StandardButton ret;
                ret = QMessageBox::warning(this, tr("警告"),
                                                                   tr("是否初始化产品计数?"),
                                   QMessageBox::Ok | QMessageBox::Cancel);
        if (ret == QMessageBox::Ok){
                        updateTotalCnt(0);
                        sysPara->devOp->clearProductCnt(1);
                        sysPara->saveParaToFile();

        }
  */
#include "mainwindow.h"
#include "ui_mainwindow.h"
#include "InputMethod.h"
#include <QVBoxLayout>
#include <InputMethod.h>
#include <QKeyEvent>
#include <QTextCodec>
#include <QTextEdit>
#include <QFont>
#include <TextEditOption.h>
#include <QDesktopWidget>
#include <DevOp.h>
#ifndef Q_OS_WIN
#include <sys/reboot.h>
#else
#define reboot(a,...) (0 == 0)
#endif
#include <QPainter>
#include <QImage>
#include <QRgb>
#include <QDebug>
#include <QScrollBar>
#include <QFontMetrics>
#include <QChar>
#include <stdlib.h>
#include <unistd.h>
#include <string>
#include "DevOp.h"
#include "Public.h"
#include "LogInfo.h"
#include "QBarCode.h"
#include "scene/picscene.h"
#include <QGraphicsItem>
#include "MyInputMethod.h"
#include <QTextBlockFormat>
#include "VerBVersion.h"
//#define SAVEWHENPREVIEW  // 预览时先保存
#include <string>
#include <iostream>
#include <cstring>

#define MDTFLAG 0xff00FF10
#define QRFLAG  0xff00FF20
#define BARFLAG 0xff00FF30

// 统一使用相同的掩码和比较值
#define COLOR_MASK 0x00FFFFF0  // 忽略 Alpha 通道
// 定义比较用的 RGB 值
#define MDT_RGB     0x00FF10
#define QR_RGB      0x00FF20
#define BAR_RGB     0x00FF30

#define MMVAR  1
#define MAX_ALLOW_VISICOSITY_OVERFLOW_NUM		120		//连续超那么多次，会被认为粘度故障

#define EXPIRY_VARI_RECONISE    0x0000FF
#define RECICLARNUMBER 22

int firstGetFpgaVersionNumFlag=0;

static int weekendPowerOff = 0;
unsigned char test_flag,open_close;
extern QFile PrintDatafile;
extern MyInputMethod *myInputMethod;

MainWindow::MainWindow(QWidget *parent) :
    QWidget(parent),
    ui(new Ui::MainWindow)
{
    ui->setupUi(this);            //不使用布局

    //ui->textEdit->verticalScrollBar()->setStyleSheet("QScrollBar:vertical { width: 40px; }");
    QFont font = ui->textEdit->font();
    font.setPixelSize(12);
    ui->textEdit->setFont(font);
    previewFlag =0;
    ui->textEditOption->bindText(ui->textEdit);
    ui->textEditOption->bindPicWidget(ui->PicWidgetDisp);
    ui->textEditOption->bindStackWidget(ui->stackedWidgetOption,ui->stackedWidgetText);
    //ui->textEditOption->setl
#ifdef _2DCODE_
    //    dlgqrcode = new  dlgQrCode();
    dlgqrcode = ui->textEditOption->qrcode; // 实时更新二维码，使用同一个界面
    //barcode = ui->textEditOption->barcode;
    barcode = new QBarCode();
#endif
    //ui->pushButtonEditBarCode->hide();

    connect(ui->labelFaultResume,SIGNAL(pressed()),this,SLOT(onLabelFaultRusumePressed()));
#ifdef EnableArabic
    connect(ui->textEditOption,SIGNAL(fontSizeArabicSelect(bool)),myInputMethod,SLOT(getArabicFlag(bool)));
    connect(myInputMethod,SIGNAL(selectArabicPage(int)),ui->textEditOption,SLOT(changeArabicPage(int)));
    connect(myInputMethod,SIGNAL(switchEnglishOrArabic(bool)),ui->textEditOption,SLOT(swithchEnglisOrArabic(bool)));
    connect(ui->textEditOption,SIGNAL(EnableSwitchArabicFlag(bool)),myInputMethod,SLOT(switchArabicFlag(bool)));
#endif
    connect(ui->labelStatusHighVoltageFault,SIGNAL(pressed()),this,SLOT(onStatusHighVoltageFault()));
    connect(ui->labelStatusInkLeak,SIGNAL(pressed()),this,SLOT(onStatusInkLeak()));
    connect(ui->labelStatusInkSwint,SIGNAL(pressed()),this,SLOT(onStatusInkSwint()));
    connect(ui->labelStatusInkWaterLevel,SIGNAL(pressed()),this,SLOT(onStatusInkWaterLevel()));
    connect(ui->labelStatusRecycleWarn,SIGNAL(pressed()),this,SLOT(onStatusRecycleWarn()));
    connect(ui->labelStatusSolvLevelWarn,SIGNAL(pressed()),this,SLOT(onStatusSolvLevelWarn()));
    connect(ui->labelStatusViscosityWarn,SIGNAL(pressed()),this,SLOT(onStatusViscosityWarn()));
    connect(ui->labelStatusChargefault,SIGNAL(pressed()),this,SLOT(onStatusChargefault()));
    //connect(ui->labelStatu,SIGNAL(pressed()),this,SLOT(on()));  labelStatusChargefault
    //connect(ui->labelStatu,SIGNAL(pressed()),this,SLOT(on()));


    connect(ui->textEdit,SIGNAL(textChanged ()),this,SLOT(ontextEdittextChanged()));
    connect(ui->textEdit,SIGNAL(cursorPositionChanged()),this,SLOT(onTextEditCursorPositionChanged()));
    connect(ui->textEdit, SIGNAL(currentCharFormatChanged(QTextCharFormat)), ui->textEditOption, SLOT(currentCharFormatChanged(QTextCharFormat)));

    timer = new QTimer(this);
    connect(timer, SIGNAL(timeout()), this, SLOT(displayTime()));
    timer->start(1000);
    airPushTimer = new QTimer(this);
    connect(airPushTimer, SIGNAL(timeout()), this, SLOT(airPushingProcess()));
    timerShowItem = new QTimer(this);
    connect(timerShowItem, SIGNAL(timeout()), this, SLOT(onShowAndHideItem()));

    timerPowerOff = new QTimer(this);
    connect(timerPowerOff,SIGNAL(timeout()),this,SLOT(sendPowerOffCmd()));

    printingFlag = false;
    startPrintingFlag = false;

    connect(ui->labelProductCnt,SIGNAL(pressed()),this,SLOT(onLabelProductCntPressed()));
    connect(ui->labelTotalProductCnt,SIGNAL(pressed()),this,SLOT(onLabelTotalProductCntPressed()));
    connect(ui->textEditOption->getPushButtonPreview(),SIGNAL(pressed()),this,SLOT(onPushButtonPreviewPressed()));
#ifndef EnableArabic
    connect(ui->textEditOption,SIGNAL(fileNameChanged(QString)),ui->labelOpenedFileName,SLOT(setText(QString)));
#else
    connect(ui->textEditOption,SIGNAL(fileNameChanged(QString)),this,SLOT(setOpenFileName(QString)));
#endif
    connect(ui->textEditOption,SIGNAL(fileNameChanged(QString)),this,SLOT(changeTxtMode(QString)));
    //edit@02-07
    connect(ui->textEditOption,SIGNAL(switchBengalLanguage(bool)),myInputMethod,SLOT(switchBangalInput(bool)));

    connect(ui->textEditOption,SIGNAL(PicfileNameOpen(QString,bool)),this,SLOT(openPicFIleOpen(QString,bool))); // 由TEXTOPTION界面按键触发
    connect(ui->pushButtonTXTOpen,SIGNAL(clicked()),ui->textEditOption,SLOT( showDlg()));
    connect(ui->pushButtonCNTResetNow,SIGNAL(pressed()),this,SLOT(onPushButtonCNTResetNowPressed()));
#ifdef _2DCODE_
    connect(ui->pushButtonEditBarCode,SIGNAL(pressed()),this,SLOT(onEditBarCode()));
    connect(ui->pushButtonQREnCode,SIGNAL(pressed()),this,SLOT(onEditQRCode()));

    connect(ui->textEditOption, SIGNAL(fontSizeChange(int)), barcode, SLOT(setFontSize(int)));
    connect(barcode,SIGNAL(onBarCodeClose()),this,SLOT(onBarCodeClose()));
    connect(dlgqrcode,SIGNAL(onQRCodeCloseNow()),this,SLOT(onQRCodeClose()));

    //专门处理网络发送的二维码
    connect(dlgqrcode,SIGNAL(sig_updateNetworkQR()),this,SLOT(slt_updateNetworkQR()));
    connect(dlgqrcode, SIGNAL(sig_clearAllQRCode()), this, SLOT(slt_clearAllQRCode()));
#endif
    connect(this,SIGNAL(ShowWarnningText(QString,QString)),this,SLOT(ShowWarnningText1(QString,QString)));

    msgtest = new QMessageBox(this);
    connect(msgtest, SIGNAL(finished(int)), this, SLOT(OnFinished(int)));

    //QFile file(SYS_ROOT_DIR"UseEn");
    if( Public::ReadLanguageName()!="Chinese")
    {
        ui->pushButtonStartPrint->setIcon(QIcon(":/icon/Estartprint2.png"));
        //ui->pushButtonPausePrint->setIcon(QIcon(":/icon/Epauseprint2.png"));
        ui->pushButtonStopPrint->setIcon(QIcon(":/icon/EstopPrint2.png"));
        if(Public::ReadLanguageName()=="Thai"){
            ui->pushButtonStartPrint->setIcon(QIcon(":/icon/Estartprint3.png"));
            ui->pushButtonStopPrint->setIcon(QIcon(":/icon/EstopPrint3.png"));
        }
    }
    // 立即清零
#ifdef ENGLISH
    ui->pushButtonStartPrint->setIcon(QIcon(":/icon/Estartprint2.png"));
    ui->pushButtonPausePrint->setIcon(QIcon(":/icon/Epauseprint2.png"));
    ui->pushButtonStopPrint->setIcon(QIcon(":/icon/EstopPrint2.png"));
#endif

#ifndef CLEARCNTNOW
    ui->pushButtonCNTResetNow->hide();
#endif
    fileChange=true;
    pushButtonFlag = true;

    if(sysPara)
    {
        sysPara->status.FileChangeRestCntFlag=0;
    }

    Public::derivePixelSizeFromHeight(12);
    pPicScene = new PicScene(this);
    //edit@12-09
    pPicScene->setSceneRect(QRectF(0,0, 3999, 220));
    ui->graphicsView->setScene(pPicScene);
    ui->graphicsView->centerOn(0,0);
    ui->senceEditOption->bindScene(pPicScene, ui->graphicsView, ui->textEdit);
    ui->senceEditOption->bindStackWidget(ui->stackedWidgetOption,ui->stackedWidgetText);
    connect(ui->senceEditOption,SIGNAL(generateQRCode(QString)),this,SLOT(onGenerateQRCode(QString)));
    connect(ui->senceEditOption,SIGNAL(previewScene()),this,SLOT(onPreviewScene()));
    connect(ui->textEditOption,SIGNAL(scenefileOpen(QString,bool)),ui->senceEditOption,SLOT(onFileOpen(QString,bool)));
    connect(this,SIGNAL(scenefileOpen(QString,bool)),ui->senceEditOption,SLOT(onFileOpen(QString,bool)));
    connect(ui->senceEditOption,SIGNAL(editItemMode()),ui->textEditOption,SLOT(onEditItemMode()));
    connect(ui->textEditOption,SIGNAL(editItemDone()),ui->senceEditOption,SLOT(onEditItemDone()));

    connect(ui->senceEditOption,SIGNAL(fileNameChanged(QString)),ui->labelOpenedFileName,SLOT(setText(QString)));
    connect(ui->senceEditOption,SIGNAL(fileNameChanged(QString)),this,SLOT(changeTxtMode(QString)));

    m_2sFlag = false;
    moveToThread(&ShowThead);
    ShowThead.start();
    ui->pushButtonStart->setHidden(true);//屏蔽紧急停机按钮
    ui->textEdit->viewport()->setProperty("cursor", QVariant(QCursor(Qt::IBeamCursor)));

    // 在 textChanged 信号中处理
    connect(ui->textEdit, &QTextEdit::textChanged, [=]() {
        QTextCursor c = ui->textEdit->textCursor();
        QRect r = ui->textEdit->cursorRect(c);
        int viewportWidth = ui->textEdit->viewport()->width();

        if (r.right() > viewportWidth - 20) {
            int diff = r.right() - viewportWidth + 20;
            ui->textEdit->horizontalScrollBar()->setValue(
                        ui->textEdit->horizontalScrollBar()->value() + diff
                        );
        }
    });
}

MainWindow::~MainWindow()
{
    disconnect(&ShowThead, SIGNAL(started()), this, SLOT(onShowAndHideItem()));
    if (ShowThead.isRunning()) {
        ShowThead.quit();
        ShowThead.wait();
    }

    delete ui;
    delete timer;
    delete pPicScene;

}

/*显示当前系统时间 */
void MainWindow::displayTime()
{
    if(sysPara){
        ui->labelCurrentTime->setText(tr("机箱:")+QString().sprintf("%d ",sysPara->status.AD_FIXED/4)+"°C");  // 机箱温度
        ui->labDate->setText(QDateTime::currentDateTime().toString("yyyy-MM-dd hh:mm:ss"));

        static bool CleanUPEn=1,preCleanUP=0;
        if(!sysPara->para.isCheckMagnet)
        {
            CleanUPEn = (sysPara->status.currReclaimTankPos<70) && (sysPara->status.statWarn & WARN_STATUS_HDINT);
        }
        else
        {
            CleanUPEn = (sysPara->status.currReclaimTankPos<70) ;
        }
        if(CleanUPEn != preCleanUP){
            ui->pushButtonCleanUP->setEnabled(CleanUPEn);
        }
        preCleanUP=CleanUPEn;
        if(m_2sFlag)
        {
            {
                sysPara->devOp->controlInkValve(!sysPara->devOp->isInkValveOpen()); //控制供墨阀开关
                sysPara->devOp->controlInkValvePWM(!sysPara->devOp->isInkValveOpen1()); //控制供墨阀开关
            }

        }
    }
}

void MainWindow::bindSysPara(SysPara *sysPara){
    this->sysPara = sysPara;
    ui->textEditOption->bindSysPara(sysPara);
    ui->widgetPrintTextDisplay->bindSysPara(sysPara);
#ifdef _2DCODE_
    barcode->bindSysPara(sysPara);
    dlgqrcode->setSysPara(sysPara);
    dlgqrcode->barCodeFlag =  this->sysPara->para.qrOption.barCodeFlag;
    dlgqrcode->SetOption((qrOption_t*)&sysPara->para.qrOption);
#endif
#ifdef PICSCENE
    ui->senceEditOption->bindSysPara(sysPara);
#endif
}

void MainWindow::updateSysParaToUI(){
    if(sysPara){
        //nothing here
        ui->textEditOption->updateSysParaToUI();
    }
}

void MainWindow::applyUIPara(){
    if(sysPara){

    }
}

void MainWindow::CheckStatus(int Flag){
    if(sysPara){
        static  unsigned int lastProductCnt=0;
        int AutoCount=0;
        int bcAutoCount=0;
        static int lastMinutes = 0;
        //QDate curDate=QDate::currentDate();
        int currMinutes = QDateTime::currentDateTime().time().minute();
        int usbDate = sysPara->status.ExpiryVarNum || sysPara->status.CurrDateVariNum ||sysPara->status.classVariNum;
        if(usbDate)
        {
            //qDebug()<<"CheckStatus";
            bool needSendPrintData=false;
            //if(sysPara->print.CurDateVar.endRowPos && (sysPara->print.CurDateVar.day != curDate.day()))
            if (sysPara->status.ExpiryVarNum && (lastMinutes != currMinutes))
            {
                ExpiryDotUpdate(1);
                needSendPrintData = true;
            }
            //if(sysPara->print.ExpiryVar.endRowPos && (sysPara->para.ExpiryDay != r_ExpiryDay))
            if(sysPara->status.CurrDateVariNum && (lastMinutes != currMinutes))
            {
                ExpiryDotUpdate(2);
                needSendPrintData = true;
            }
            if(sysPara->status.classVariNum && (lastMinutes != currMinutes))
            {
                ExpiryDotUpdate(3);
                needSendPrintData = true;
            }
            lastMinutes = currMinutes;
            //sysPara->print.CurDateVar.day = curDate.day();
            if(needSendPrintData)
            {
                sysPara->status.ExpiryDispUpdate=10;
                SendPrintDataToFpga(0);
            }
            //if(ui->stackedWidgetText->currentWidget()==ui->pagePrintTextDisplay)
            //    ui->widgetPrintTextDisplay->update();
            //sysPara->status.ExpiryDispUpdate=1;

        }
        if(sysPara->status.productCnt != lastProductCnt)
            //if( sysPara->para.calandar_and_dat.cnt1CurrValue  != sysPara->para.qrOption.counter )
        {
            lastProductCnt = sysPara->status.productCnt;
            //sysPara->para.qrOption.counter ++;//= sysPara->para.calandar_and_dat.cnt1CurrValue;
            // 荆州-四机赛瓦要求：跟计数器同步 此处优化逻辑，增量大于0才+=
            if (sysPara->para.qrOption.CntInc > 0)
                sysPara->para.qrOption.counter += sysPara->para.qrOption.CntInc;

            AutoCount = (sysPara->status.QRvariNum?1:0);
            //bcAutoCount = (sysPara->status.BCvariNum?1:0);
#ifdef MYARMTEST
            qDebug()<<"CheckStatus:"<<sysPara->para.qrOption.counter<<AutoCount;
#endif
            //qDebug()<<"CheckStatus :"<<sysPara->status.productCnt<<sysPara->para.qrOption.counter <<sysPara->status.QRvariNum;
        }
        //else qDebug()<<"P:"<<lastProductCnt<<sysPara->status.productCnt;

        if( sysPara->para.qrOption.RecFromHost || AutoCount  )
        {
            sysPara->para.qrOption.RecFromHost=0;
            sysPara->para.qrOption.type = sysPara->print.QRvars[0].type;
            sysPara->para.qrOption.height = sysPara->print.QRvars[0].height;
            sysPara->para.qrOption.width = sysPara->print.QRvars[0].width;

            if(ui->stackedWidgetText->currentWidget()==ui->pagePrintTextDisplay)
            {
                onUpdateDispQRCode(1); // 更新二维码显示
                //qDebug()<<"PN:"<<lastProductCnt;
            }
            else {  onUpdateDispQRCode(0);
                //qDebug()<<"P0:"<<lastProductCnt;
            }

            if(AutoCount)
            {
                SendPrintDataToFpga(0);
            }

            AutoCount =0;
        }

        if(Flag){//pulse_300ms
            sysPara->status.LightUpCnt ++ ;
            if((sysPara->status.LightUpCnt%3) == 0){
                if(printingFlag && startPrintingFlag && !sysPara->status.RedLightOnFlag && !sysPara->status.YellowLightOnFlag)
                    sysPara->status.GreenLightOnFlag = true;
                else
                    sysPara->status.GreenLightOnFlag = false;
                if(sysPara->status.GreenLightOnFlag){
                    if(!sysPara->para.isCheckPrintLight)
                        sysPara->devOp->controlGreenLight(!sysPara->devOp->isGreenLightEnable());
                    else
                        sysPara->devOp->controlGreenLight(true);
                }
                else{
                    sysPara->devOp->controlGreenLight(false);  // 只在确定不亮时才发关灯
                }
            }
            Test_Start_Stop();
            if(sysPara->status.circleProductCnt && (sysPara->status.productCnt >= sysPara->para.cnt1EndValue))
            {
                if(sysPara)
                {
                    sysPara->devOp->clearProductCnt(3 | 0x10);// [3]总产品计数器清零FPGA
                    sysPara->para.totalProductCnt = 0;
                }
            }
        }

    }
}


void MainWindow::RefreshStatusLight(){//100ms
    if(sysPara){
        static int hdint = 0;
        static int reclainTankReachEnd = 0;
        if((!(sysPara->status.statWarn & WARN_STATUS_HDINT)) && (hdint == 0)) { //喷头盖由开变关
            if (sysPara->status.reclainTankReachEnd) {
                sysPara->devOp->highVoltageCtrl(sysPara->para.HighVoltageAmplitude);
            }
        }
        hdint = !(sysPara->status.statWarn & WARN_STATUS_HDINT);

        if(sysPara->status.reclainTankReachEnd && reclainTankReachEnd == 0) { //开回收槽到底
            if (!(sysPara->status.statWarn & WARN_STATUS_HDINT)) { //喷头盖是关闭的状态
                sysPara->devOp->highVoltageCtrl(sysPara->para.HighVoltageAmplitude);
            }
        }
        reclainTankReachEnd = sysPara->status.reclainTankReachEnd;

        if(sysPara->status.lastStatWarn != sysPara->status.statWarn || flagOfClearHighVltageWarnning){
            if(!(sysPara->status.statWarn & WARN_STATUS_INK_SWINT)){//墨线开关
                ui->labelStatusInkSwint->setPixmap(QPixmap(QString::fromUtf8(":/image/ALARMGreen.PNG")));
            }
            else {
                ui->labelStatusInkSwint->setPixmap(QPixmap(QString::fromUtf8(":/image/ALARMRed.PNG")));
            }

            if(!(sysPara->status.statWarn & WARN_STATUS_HDINT)){//喷头盖
                ui->labelStatusHDINT->setPixmap(QPixmap(QString::fromUtf8(":/image/ALARMGreen.PNG")));

                if(printingFlag && startPrintingFlag)
                    setRunStatus(tr("正在喷印..............."));
            }
            else {
                ui->labelStatusHDINT->setPixmap(QPixmap(QString::fromUtf8(":/image/ALARMRed.PNG")));
                if(printingFlag && startPrintingFlag)
                    setRunStatus(tr("喷头盖开, 喷印无法正常进行!!!"));
            }


            if(!(sysPara->status.statWarn & WARN_STATUS_SUMP_WARN)){		//液位渗漏，高电平警告
                ui->labelStatusInkLeak->setPixmap(QPixmap(QString::fromUtf8(":/image/ALARMGreen.PNG")));
            }
            else {
                ui->labelStatusInkLeak->setPixmap(QPixmap(QString::fromUtf8(":/image/ALARMRed.PNG")));
                strTitle = tr("墨水缸满报警");
                if(sysPara->devOp->isMixValveOpen()) {
                    sysPara->devOp->controlMixValve(false); //关掉混合阀
                }
            }
            if(!(sysPara->status.statWarn & WARN_STATUS_INK_WARN)){
                ui->labelStatusInkWaterLevel->setPixmap(QPixmap(QString::fromUtf8(":/image/ALARMGreen.PNG")));
            }
            else {
                ui->labelStatusInkWaterLevel->setPixmap(QPixmap(QString::fromUtf8(":/image/ALARMRed.PNG")));
                strTitle = tr("墨水液位报警");


            }
            if(!(sysPara->status.statWarn & WARN_STATUS_SOLV_WARN)){
                ui->labelStatusSolvLevelWarn->setPixmap(QPixmap(QString::fromUtf8(":/image/ALARMGreen.PNG")));
            }
            else {
                ui->labelStatusSolvLevelWarn->setPixmap(QPixmap(QString::fromUtf8(":/image/ALARMRed.PNG")));
                strTitle = tr("溶剂液位报警");

            }

            if(!(sysPara->status.statWarn & WARN_STATUS_RECYCLE_FAULT) ){
                ui->labelStatusRecycleWarn->setPixmap(QPixmap(QString::fromUtf8(":/image/ALARMGreen.PNG")));

            }
            else {
                ui->labelStatusRecycleWarn->setPixmap(QPixmap(QString::fromUtf8(":/image/ALARMRed.PNG")));

            }

            //static int HVfaultCnt=0;
            if(!(sysPara->status.statWarn & WARN_STATUS_POWER_MON)){
                if(!sysPara->status.lastHighVoltageFault)
                {
                    flagOfClearHighVltageWarnning = false;
                    ui->labelStatusHighVoltageFault->setPixmap(QPixmap(QString::fromUtf8(":/image/ALARMGreen.PNG")));
                }
                //  HVfaultCnt=0;
                //sysPara->status.HVFaultCloseEn=0;
            }
            else {
                ui->labelStatusHighVoltageFault->setPixmap(QPixmap(QString::fromUtf8(":/image/ALARMRed.PNG")));
                if(startPrintingFlag && printingFlag){		//已经在打印，则暂停打印                               2013-9-15高压报警停止充电
                    on_pushButtonPausePrint_pressed();
                    LogInfo::setRunStatusText(tr("高压故障，暂停打印"));
                    setRunStatus(tr("高压故障，暂停打印"));

                    strTitle = tr("高压故障，暂停打印.");

                    sysPara->status.lastHighVoltageFault = true;
                }

                if((sysPara->status.currReclaimTankPos != 0) &&  sysPara->para.HVFaultCloseEn )
                {
                    //HVfaultCnt++;
                    //  高压故障关回收槽
                    if(sysPara->status.HVFaultCloseEn==0){
                        sysPara->status.reclaimTankBlockedAppending=0;
                        sysPara->status.reclaimCloseCnt=100;
                        on_pushButtonReclaimTankClose_pressed();
                        sysPara->status.reclaimTankBlockedAppending=1;
                        LogInfo::setRunStatusText(tr("高压故障，关回收槽"));
                        setRunStatus(tr("高压故障，关回收槽和墨线"));
                    }
                    sysPara->status.HVFaultCloseEn=1;
                }
            }

        }

        /*-----------------------------------------------------------------------------------*/
        sysPara->status.lastStatWarn = sysPara->status.statWarn;
        if(sysPara->status.lastViscosityFault != sysPara->status.viscosityFault){
            if(sysPara->status.viscosityFault==0){
                ui->labelStatusViscosityWarn->setPixmap(QPixmap(QString::fromUtf8(":/image/ALARMGreen.PNG")));
            }
            else {
                if(sysPara->status.viscosityFault==1){

                    ui->labelStatusViscosityWarn->setPixmap(QPixmap(QString::fromUtf8(":/image/ALARMRed.PNG")));

                }
                else if(sysPara->status.viscosityFault==2) {
                    ui->labelStatusViscosityWarn->setPixmap(QPixmap(QString::fromUtf8(":/image/ALARMYellow.PNG")));

                }
            }
        }
        sysPara->status.lastViscosityFault = sysPara->status.viscosityFault;
        /*-----------------------------------------------------------------------------------*/
        if(!(sysPara->status.statWarn & WARN_STATUS_RECYCLE_FAULT)){                                            //20140211 nie
            if(sysPara->status.RecycleWarnCnt)
                ui->labelStatusRecycleWarn->setPixmap(QPixmap(QString::fromUtf8(":/image/ALARMGreen.PNG")));
            sysPara->status.RecycleWarnCnt = 0;
            sysPara->status.lastRecycleWarn = 0;
        }
        else {
            // 速度过快时墨线可能瞬时偏移导致误报回收故障，此时抑制计数器累加并重置，避免误触发关槽
            if(sysPara->status.lesslen_warn && (sysPara->para.printTriggerMode != PRINT_TRIGGER_TIME))
            {
                sysPara->status.RecycleWarnCnt = 0;
                ui->labelStatusRecycleWarn->setPixmap(QPixmap(QString::fromUtf8(":/image/ALARMYellow.PNG")));
            }
            else if(!sysPara->status.lastRecycleWarn && !sysPara->status.isPumpValveControledByHand && sysPara->status.selfCheckDone)
            {
                if(sysPara->status.RecycleWarnCnt > RECYCLE_WARN_DELAY)
                {
                    sysPara->status.lastRecycleWarn = RECYCLE_WARN_DELAY;//5s
                    ui->labelStatusRecycleWarn->setPixmap(QPixmap(QString::fromUtf8(":/image/ALARMRed.PNG")));
                    sysPara->status.reclaimCloseCnt=100;
                    if(sysPara->para.RecycleWarnAction)
                    {
                        if((sysPara->status.currReclaimTankPos != 0) && !sysPara->devOp->isReclaimTankCloseEnable()){
                            on_pushButtonStopPrint_pressed();
                            on_pushButtonReclaimTankClose_pressed();
                            LogInfo::setRunStatusText(tr("回收故障，关闭回收槽，关墨线"));
                            setRunStatus(tr("回收故障，关闭回收槽，关墨线"));
                        }
                    }
                    else setRunStatus(tr("回收故障."));

                }
                else
                {
                    sysPara->status.RecycleWarnCnt ++ ;
                    ui->labelStatusRecycleWarn->setPixmap(QPixmap(QString::fromUtf8(":/image/ALARMYellow.PNG")));
                    if(sysPara->status.RecycleWarnCnt%10==9)
                        LogInfo::setRunStatusText(tr("回收异常,墨线可能偏离.(%1)").arg(sysPara->status.RecycleWarnCnt));
                }
            }
            else if(sysPara->status.lastRecycleWarn)sysPara->status.lastRecycleWarn--;
        }

        if(ui->labelRunStatus->text().length()<4){
            if(startPrintingFlag ){
                if(printingFlag)
                    setRunStatus(tr("正在喷印..............."));
                else
                    setRunStatus(tr("暂停喷印..............."));
            }
        }

        // 20160620   新增主界面显示：压力，粘度，隔膜位置，晶振电压数，相位
        ui->labPress->setText(QString("%1/%2").arg(sysPara->status.PRESSURE).arg(sysPara->para.pressure));
        ui->labViso->setText(QString("%1/%2").arg(sysPara->status.viscosity).arg(sysPara->para.viscosity) );
        if(sysPara->para.gearPumpEnable)
        {
            ui->labPosition->setText(QString("%1").arg(sysPara->status.gearPumpRunSpeed));
        }
        else
        {
            ui->labPosition->setText(QString("%1/%2").arg(sysPara->status.SEPTAL_POSITION).arg(sysPara->para.septalPostion) );
        }
        ui->labOscVol->setText(QString::number(sysPara->status.HV_DETOUT) + "/" + QString::number(sysPara->para.maxHighVoltageDAC));
    }
}


bool MainWindow::updatePhaseIndicatorLight(){
    if(sysPara==0) return 0;

    if(dlgMyWarringShowDlyCnt)dlgMyWarringShowDlyCnt--;
    if(dlgMyWarringShowDlyCnt==1) dlgMyWarring.hide();

    /*------------------------------------------喷头盖未关或回收槽未全部打开的时候不报相位故障-------------------------------------------------*/
    if((!sysPara->status.flight_tm_error && !sysPara->status.detect_phase_error) || (sysPara->status.statWarn & WARN_STATUS_HDINT) || !sysPara->status.reclainTankReachEnd){
        //故障后必须等手动按故障恢复才会继续
        if(!sysPara->para.suspendAfterPhaseFault && !sysPara->para.powerOffAfterPhaseFault){
            if(sysPara->status.lastPhaseFault){
                sysPara->status.lastPhaseFault = 0;
                ui->labelStatusChargefault->setPixmap(QPixmap(QString::fromUtf8(":/image/ALARMGreen.PNG")));
            }
        }
        sysPara->status.phaseErrorCnt = 0;
    }
    else {
        if(sysPara->status.phaseErrorCnt < 10)
            sysPara->status.phaseErrorCnt ++ ;
        else {
            if(!sysPara->status.lastPhaseFault){
                ui->labelStatusChargefault->setPixmap(QPixmap(QString::fromUtf8(":/image/ALARMRed.PNG")));
                sysPara->status.lastPhaseFault = 1;
                if(sysPara->status.flight_tm_error)
                {
                    LogInfo::setRunStatusText(tr("相位故障:飞行时间错误!"));
                }
                if(sysPara->status.detect_phase_error)
                {
                    LogInfo::setRunStatusText(tr("相位故障:相位检测错误!"));
                }

            }
            if(sysPara->para.powerOffAfterPhaseFault ){
                if(!sysPara->status.powerOffAfterPhaseFaultAppending){
                    sysPara->status.powerOffAfterPhaseFaultAppending = 1;
                    _on_pushButtonPowerOff_pressed(false);
                    LogInfo::setRunStatusText(tr("相位故障，准备关机"));
                    setRunStatus(tr("相位故障，准备关机"));
                    strTitle = tr("相位故障，准备关机");


                }
            }
            else if(sysPara->para.suspendAfterPhaseFault){
                if(sysPara->para.stopCounterMeterAfterFault){
                    if(startPrintingFlag && printingFlag){		//已经在打印，则暂停打印
                        on_pushButtonPausePrint_pressed();
                        LogInfo::setRunStatusText(tr("相位故障，暂停打印"));
                        setRunStatus(tr("相位故障，暂停打印"));
                        strTitle = tr("相位故障，暂停打印");

                    }
                }
                else if(!sysPara->status.DACDisable){
                    sysPara->devOp->printCtrl(PRINT_CTRL_DAC_DISABLE);
                    sysPara->status.DACDisable = true;
                    LogInfo::setRunStatusText(tr("相位故障，屏蔽DAC输出"));
                    setRunStatus(tr("相位故障，屏蔽充电"));
                    strTitle = tr("相位故障，屏蔽充电");

                }

            }
        }
    }


    return sysPara->status.lastPhaseFault;
}

double MainWindow::getMaxSpeedCalcPara(){
    sysPara->para.printRowDelay = sysPara->para.currPrintMode;
    if(sysPara->status.isPrinting == false)
        sysPara->status.pixNumPerCol = sysPara->status.currPrintRow;
    // else
    //     sysPara->status.currPrintRow = sysPara->status.pixNumPerCol;
    sysPara->para.pixNumPerCol = sysPara->status.pixNumPerCol;

    sysPara->para.reducedPixelNum = sysPara->para.reducedPixelNumRatio*sysPara->para.pixNumPerCol/100;
    int dotNumPerCol = (sysPara->para.pixNumPerCol- sysPara->para.lineEndAdjustPointCnt)*(sysPara->para.printRowDelay + 1)
            + (sysPara->para.lineEndAdjustPointCnt)*(sysPara->para.lineEndAdjustPointDelay + 1);
    dotNumPerCol = sysPara->para.pixNumPerCol?
                ((dotNumPerCol*(sysPara->para.pixNumPerCol - sysPara->para.reducedPixelNum))/sysPara->para.pixNumPerCol):1;
    //    sysPara->para.dotNumPerCol += sysPara->para.printColDelay;
    dotNumPerCol =( sysPara->para.alterPrint.enable)? dotNumPerCol/2:dotNumPerCol;

    int dotNum = sysPara->para.divideRatio?(FPGA_SYS_HZ/(sysPara->para.divideRatio*2)):0;// 1s时间内墨点数 （即晶振频率 64000)
    int colNum = dotNumPerCol?dotNum/dotNumPerCol:0;  // 第列可用墨点数 ＝ 1s时间内墨点数/ 列需要墨点数
    double pulseNum = colNum*sysPara->para.synNumPerCol/(1<<8);	//synNumPerCol是被放大后的值

    if(sysPara->para.divideRatio == 0 || sysPara->para.synPulseNumPerMm == 0)
        return 600.0f;

    double freq = (FPGA_SYS_HZ/(sysPara->para.divideRatio*2));
    double ddotNumPerCol = sysPara->status.currPrintRow - (sysPara->status.currPrintRow * sysPara->para.reducedPixelNumRatio / 100.0);
    pulseNum = sysPara->para.printColDelay / sysPara->para.synPulseNumPerMm / 1000.0 * freq / ddotNumPerCol * 60.0;
    return qBound(0.0, pulseNum, 600.0);
}

static int reclaimTankDelay = 0;
void MainWindow::updateSysStatusToUI(){ //100ms
    if(sysPara){
        if(sysPara->para.gearPumpEnable)
        {
            ui->label_11->setText(tr("齿轮泵转速"));
        }
        else
        {
            ui->label_11->setText(tr("隔膜位置"));
        }
        RefreshStatusLight();
        if(sysPara->status.lastProductCnt != sysPara->status.productCnt){			//产品计数
            ui->labelProductCnt->setText(QString::number(sysPara->status.productCnt));
            updateTotalCnt(0);
        }
        if(sysPara->status.ExpiryDispUpdate >0 )
        {
            sysPara->status.ExpiryDispUpdate--;
            ui->widgetPrintTextDisplay->update();// 2018.5.25
        }
        if(sysPara->para.alterPrint.enable==1) ui->labelXFileName->setText (tr("交替打印"));
        else if(sysPara->para.alterPrint.enable==2) ui->labelXFileName->setText (tr("电眼交替"));
        else ui->labelXFileName->setText ("");
        /*--------------------------------------------------------------------------*/
        //if(sysPara->para.printTriggerMode == PRINT_TRIGGER_SYNCHRONIZER && printintFlag){	//同步器速度
        if((
                    (sysPara->para.printTriggerMode == PRINT_TRIGGER_SYNCHRONIZER)
                    ||(((sysPara->para.printTriggerMode == PRINT_TRIGGER_ELEC_EYE_VOLTATE_LEVEL)
                        ||(sysPara->para.printTriggerMode == PRINT_TRIGGER_ELEC_EYE_EDGE)
                        )&& sysPara->para.eleEyeTriggerSynPrintEn)
                    )
                )//&&printintFlag
        {
            if(sysPara->para.synPulseNumPerMm) {

                unsigned int tmp = ((unsigned int) sysPara->status.synPulseCntPer1s ) & 0xffffff;
                unsigned int mm = tmp /sysPara->para.synPulseNumPerMm * 60;  // 1min总脉冲/毫米脉冲数 = 1min走过的距离mm数
                int dotNum = sysPara->para.divideRatio?(FPGA_SYS_HZ/(sysPara->para.divideRatio*2)):0;// 1s时间内墨点数 （即晶振频率 64000)
                int colNum = sysPara->para.dotNumPerCol?dotNum/sysPara->para.dotNumPerCol:0;  // 第列可用墨点数 ＝ 1s时间内墨点数/ 列需要墨点数
                int pulseNum = colNum*sysPara->para.synNumPerCol/(1<<8);	//synNumPerCol是被放大后的值

                int maxMM = 0;
                if(!sysPara->para.charWidthSetEnable)
                {
                    if(    (sysPara->status.currPrintRow != 0)
                           && (sysPara->para.printTriggerMode == PRINT_TRIGGER_SYNCHRONIZER)
                           /*&& (sysPara->para.currPrintMode == FAST_PRINT || sysPara->para.currPrintMode == STANDARD_PRINT) */){
                        maxMM = calculateMaxSpeed(pulseNum);
                        maxMM = maxMM *60;
                        if(sysPara->para.alterPrint.enable)
                        {
                            maxMM = maxMM * 2;
                        }
                    }
                    else
                    {
                        maxMM = (pulseNum/sysPara->para.synPulseNumPerMm) * 60;// 列的最大间距
                        //                    qDebug()<< "[Info] OLD COUNT mm" << maxMM;
                    }
                }
                else
                {
                    double speed = getMaxSpeedCalcPara();//No67
                    maxMM = int(speed * 1000.0);
                }
                ui->labelSynRate->setText(tr("%1.%2[%3.%4]米/分").arg(mm/1000).arg(mm%1000,3,10,QLatin1Char('0'))
                                          .arg(maxMM/1000).arg(maxMM%1000,3,10,QLatin1Char('0')));
            }
            else
                ui->labelSynRate->setText("");
            sysPara->status.lastSynPulseCntPer1s = sysPara->status.synPulseCntPer1s;
        }
        else
            ui->labelSynRate->setText("");

        /*--------------------------------------------------------------------------*/
        if(sysPara->status.lastSynColDelay != sysPara->status.synColDelay){
            //			if(sysPara->para.printTriggerMode == PRINT_TRIGGER_SYNCHRONIZER)
            if((sysPara->para.printTriggerMode == PRINT_TRIGGER_SYNCHRONIZER)
                    ||((sysPara->para.printTriggerMode == PRINT_TRIGGER_ELEC_EYE_VOLTATE_LEVEL
                        ||sysPara->para.printTriggerMode == PRINT_TRIGGER_ELEC_EYE_EDGE)
                       && sysPara->para.eleEyeTriggerSynPrintEn))
                ui->labelSynColDelay->setText(tr("列延时:%1点").arg(sysPara->status.synColDelay));
            sysPara->status.lastSynColDelay = sysPara->status.synColDelay;
        }
        /*--------------------------------------------------------------------------*/
        static int i=0;
        i++;
        if(sysPara->status.stm32Verion == 0){
            if(i % 10 == 0){
                sysPara->devOp->readSTM32Version();
            }
        }
        if(sysPara->status.stm32Time == 0){
            if(i % 10 == 0){
                sysPara->devOp->readSTM32Time();
            }
        }
        if(sysPara->status.fpgaVersionNum == 0){		//因为进入系统就会进主界面，马上就会将版本号读出
            if(i % 10 == 0){
                sysPara->devOp->readFpgaVersionNum();
                sysPara->devOp->readbuilDat();
            }
            firstGetFpgaVersionNumFlag=1;
            QString ARM_Version;
            ARM_Version.sprintf("%s.%s.", MACHINAE_VER, PUMP_VER);
            ARM_Version = ARM_Version + (QString) Public::DateToString(__DATE__)+"."+SUB_VER+SUB_RFID;
            ui->labelFpgaVersionNum->setText(QString("%1/F%2.%3.%4").arg(ARM_Version).arg(0).arg(0).arg(0) );
        }
        else{
            static bool logflag5 = true;
            unsigned int num = sysPara->status.fpgaVersionNum & 0xf000;
            if(num != 0x1000 && num != 0x6000 && num != 0x2000 && num != 0x8000 && logflag5){
                sysPara->status.fpgaVersionNum = 0;
            }
            else if(logflag5){
                emit readFPGAVersionReady();
                logflag5 = false;
                sysPara->devOp->writeFpgaPrintPara(true);
                QString ARM_Version;
                ARM_Version.sprintf("%s.%s.", MACHINAE_VER, PUMP_VER);
                ARM_Version = ARM_Version + (QString) Public::DateToString(__DATE__)+"."+SUB_VER+SUB_RFID;
                ui->labelFpgaVersionNum->setText(QString("%1/F%2.%3.%4").arg(ARM_Version).arg(sysPara->status.fpgaVersionNum >> 12)
                                                 .arg((sysPara->status.fpgaVersionNum>>8) & 0x0f).arg(sysPara->status.fpgaVersionNum&0xff) );
            }
        }
        static bool logflag6 = false;
        if(!logflag6){
            if(sysPara->status.fpgaVersionNum !=0 && sysPara->status.stm32Verion != 0){
                UpdateUIVersion();
                logflag6 = true;
            }
        }

        bool found_CNT1 = false;
        bool found_CNT2 = false;
        bool found_CNT3 = false;
        bool found_CNT4 = false;
        /*--------------------------------------------------------------------------*/
        if(sysPara->status.variNum && (ui->stackedWidgetText->currentWidget() == ui->pagePrintTextDisplay)){

            bool updatePrintTextDisplayFlag = false;

            for(int i = 0; i < sysPara->status.variNum; i++){
                int val = 0;
                switch(  Public::getType(sysPara->status.vars[i].type))
                {
                case CALANDAR_YEAR:val = sysPara->status.calandar_and_dat.year;break;
                case CALANDAR_MONTH:val = sysPara->status.calandar_and_dat.month;break;
                case CALANDAR_DAY:val = sysPara->status.calandar_and_dat.day;break;
                case CALANDAR_WEEK:val = sysPara->status.calandar_and_dat.week;break;
                case CALANDAR_HOUR:val = sysPara->status.calandar_and_dat.hour;break;
                case CALANDAR_MINUTE:val = sysPara->status.calandar_and_dat.minute;break;
                case CALANDAR_SECOND:val = sysPara->status.calandar_and_dat.second;break;
                case CALANDAR_CNT1:val = QString::number(sysPara->status.calandar_and_dat.cnt1CurrValue,16).toInt();found_CNT1=true;break;
                case CALANDAR_CNT2:val = QString::number(sysPara->status.calandar_and_dat.cnt2CurrValue,16).toInt();found_CNT2=true;break;
                case CALANDAR_CNT3:val = QString::number(sysPara->status.Status_Counter3.cnt3CurrValue,16).toInt();found_CNT3=true;break;
                case CALANDAR_CNT4:val = QString::number(sysPara->para.cnt4CurrValue,10).toInt();found_CNT4=true;break;
                case RANDOMNUM : val = QString::number(  sysPara->status.calandar_and_dat.RandomValue1, 16).toInt(); break;
                case CALANDAR_XDAY:val = sysPara->status.XXXDay;break;
                case EXPIRYDATE: break;
                default:qDebug() << "error,unknown variable type:" << sysPara->status.vars[i].type;
                }

                if(sysPara->status.vars[i].currVal != val)
                    //{
                    updatePrintTextDisplayFlag = true;
                sysPara->status.vars[i].currVal = val;
                //}

            }
            if(updatePrintTextDisplayFlag)			//减少不必要的刷新动作
            {
                ui->widgetPrintTextDisplay->updateSysStatusToUI();
            }
        }
        emit setCNT1Select(found_CNT1);
        emit setCNT2Select(found_CNT2);
        emit setCNT3Select(found_CNT3);
        if(sysPara->para.isEnableGetDataButton)
        {
            ui->pushButtonGetData->setEnabled(true);
        }
        else
        {
            ui->pushButtonGetData->setEnabled(false);
        }
        if(SIMULATE_PRINTING_MODE)
            enablePrintButton(true);
        ui->label_size->setText(tr("%1/%2/%3").arg(sysPara->status.sizeFPGA).arg(sysPara->status.sizequeueFPGA).arg(sysPara->status.sizeSTM32));

        if(sysPara->status.currReclaimTankPos <= 5)
            sysPara->status.flagOfRebootEnable = true;
        else
            sysPara->status.flagOfRebootEnable = false;
        if(sysPara->status.flagOfRebootEnable || TEST_MODE){
            ui->pushButton_Reboot->setEnabled(true);
        }else{
            ui->pushButton_Reboot->setEnabled(false);
        }
#ifdef  NETWORKQRCODE //荆州-四机赛瓦要求：跟计数器同步
        // ========== 新增：检测计数器1变化并同步更新二维码 ==========
        int currentCnt1Value =
                QString::number(sysPara->status.calandar_and_dat.cnt1CurrValue, 16).toInt();

        if(sysPara->para.qrOption.counter != currentCnt1Value){

            // 检查是否有二维码变量需要更新
            if(sysPara->status.QRvariNum > 0 && sysPara->para.qrOption.AutoCount){
                // 更新二维码选项中的计数器值
                sysPara->para.qrOption.counter = currentCnt1Value;
                // 触发二维码重新生成
                onUpdateDispQRCode(1);

                // 如果正在打印，重新发送打印数据
                if(startPrintingFlag && printingFlag){
                    SendPrintDataToFpga(0);
                }
            }
        }
        // ========================================================
#endif
    }
}

void MainWindow::showPrintBitImage(){
    if(sysPara){
        unsigned char *dat;
        bool MaxCol4000;
        if(sysPara->status.flagOfNo67FPGA)
            MaxCol4000 = true;
        else
            MaxCol4000 = false;
        if(MaxCol4000){
            dat =sysPara->status.printDat_Normal;
        }else{
            dat =sysPara->status.printDat;
        }
        for(int j = sysPara->status.currPrintCol - 1; j >= 0 ; j --){
            for(int i = 0; i < sysPara->status.currPrintRow; i++){
                if(dat[j*MAX_PRINT_ROW_BYTE_NUM + i/8] & (1<<(i%8)))
                    printf("1");
                else
                    printf(" ");
            }
            printf("\n");
        }
    }
}

//void MainWindow::on_pushButtonTXTOpen_pressed(){

//}

void MainWindow::openPicFIleOpen(QString filePath,bool insertFlag) {
    fileChange=true;
#ifdef TXTEDIT
    ui->textEditOption->onFileOpenN(filePath,insertFlag);
    emit setMainTabNow(0);
#else
    Q_UNUSED(insertFlag);

    if(sysPara) {



        if(//filePath.endsWith(".gif") || filePath.endsWith(".jpeg") ||
                //filePath.endsWith(".jpg") ||
                //      ||filePath.endsWith(".bmp")
                filePath.endsWith(".png"))
        {
            QFile file(filePath);
            if(!file.open(QIODevice::ReadOnly)){
                QMessageBox::warning(this,tr("警告"),tr("无法打开文件") + filePath);
                return ;
            }
            else {

                QByteArray data = file.readAll();
                QTextCodec *codec = Qt::codecForHtml(data);
                QString str = codec->toUnicode(data);

                if(filePath.startsWith(UDISK_DOC_ROOT_DIR))
                    str.replace(DOC_ROOT_DIR,UDISK_DOC_ROOT_DIR);			//做相应处理
                file.close ();
                ui->PicWidgetDisp->loadImage (filePath,false);
                ui->labelOpenedFileName->setText (QFileInfo(filePath).fileName());
                LogInfo::setRunStatusText(tr("打开文件:")+(QString)(QFileInfo(filePath).fileName()));
                if(sysPara){
                    //QString str1 =QFileInfo( filePath).fileName ();
                    sysPara->sysFile= PARA_ROOT_DIR+QFileInfo( filePath).baseName()+".dpn";
                    sysPara->loadParaFromFile ();// 从磁盘读取参数文件
                    emit openFileChange();
                    // emit openFileChange();
                    snprintf(sysPara->para.lastOpenedFileName,sizeof(sysPara->para.lastOpenedFileName),"%s",filePath.toLatin1().constData());
                }
                /* other action */
                PreviewPressed();


                if(sysPara->status.addSpace)
                    ui->widgetPrintTextDisplay->setDisplaySize(sysPara->status.currPrintCol/2,  sysPara->para.AlterMode?sysPara->status.currAlterPrintRow : sysPara->status.currPrintRow);
                else ui->widgetPrintTextDisplay->setDisplaySize(sysPara->status.currPrintCol,  sysPara->para.AlterMode?sysPara->status.currAlterPrintRow : sysPara->status.currPrintRow);
                ui->stackedWidgetText->setCurrentWidget(ui->pagePrintTextDisplay);
                ui->widgetPrintTextDisplay->setScaleRatio(3);
                //ui->labelTextWidthHeight->setText(tr("[ %1行 x %2列 ]").arg(sysPara->status.currPrintRow).arg(sysPara->status.currPrintCol));
            }
        }
    }
#endif

}

void MainWindow::on_pushButtonGetData_pressed()
{
    emit getJSONData();
}

void MainWindow::onPushButtonPreviewPressed(){
    if(sysPara)
    {
        sysPara->para.EditMode = TXTFILE;
        if(previewFlag==0) {
#ifdef SAVEWHENPREVIEW
            if(ui->textEditOption->fileName.isEmpty()){
                QMessageBox::StandardButton ret = QMessageBox::Ok;
                ret = QMessageBox::warning(this, tr("提示"),
                                           tr("文件未保存，是否先保存文件!"),
                                           QMessageBox::Ok | QMessageBox::Cancel);
                if (ret == QMessageBox::Ok)
                {
                    ui->textEditOption->on_bottonSave_clicked();
                }
            }
            else
                ui->textEditOption->on_bottonSave_clicked();
#else

#endif
            PreviewPressed();
        }
    }
}


int MainWindow::getVarStarRow(int x,int y,int h,int w,char *dat)
{
    int t_x_start_pos = x;
    int t_x_end_pos = t_x_start_pos + w;
    bool MaxCol4000;
    if(sysPara->status.flagOfNo67FPGA)
        MaxCol4000 = true;
    else
        MaxCol4000 = false;
    if(t_x_end_pos > (MaxCol4000?MAX_PRINT_COL_NUM_Normal:MAX_PRINT_COL_NUM_Wide))
        t_x_end_pos = (MaxCol4000?MAX_PRINT_COL_NUM_Normal:MAX_PRINT_COL_NUM_Wide);
    int t_y_start_pos = y - h/2;
    //int t_y_end_pos = y ;
    if(t_y_start_pos < 0)
        t_y_start_pos = 0;

    for(int j=y - h/2;j>0;j--)
    {
        char startRowFound=0;
        for(int i = t_x_start_pos; i < t_x_end_pos; i++)
        {
            if( (dat[MAX_PRINT_ROW_BYTE_NUM*i + j/8] & (1 << (j%8))))
            {
                startRowFound=1;
                dat[MAX_PRINT_ROW_BYTE_NUM*i + j/8] &=~ (1 << (j%8));//将画点取消掉
            }
        }
        if(startRowFound)continue;
        t_y_start_pos=j+1;
        // qDebug()<<"F:"<<t_y_start_pos;
        break;
    }
    return t_y_start_pos;
}

void MainWindow::PreviewPressed(){
    int coldot=0;
    if(sysPara){
        previewFlag=1;
        sysPara->status.currPrintRow = 0;
        sysPara->status.variNum = 0;
        sysPara->status.QRvariNum = 0;
        sysPara->status.ExpiryVarNum=0;
        unsigned char *dat;
        bool MaxCol4000;
        if(sysPara->status.flagOfNo67FPGA)
            MaxCol4000 = true;
        else
            MaxCol4000 = false;
        if(MaxCol4000){
            dat =sysPara->status.printDat_Normal;
            memset(dat,0,sizeof(sysPara->status.printDat_Normal));
        }else{
            dat =sysPara->status.printDat;
            memset(dat,0,sizeof(sysPara->status.printDat));
        }

        //qDebug()<<"Preview:";
        //////////////////////////////////////////////////////在这里清变量参数
        sysPara->status.ExpiryVarNum=0;
        sysPara->status.CurrDateVariNum = 0;
        sysPara->status.classVariNum = 0;
        sysPara->print.ExpiryVar.startColPos = 0;
        sysPara->print.ExpiryVar.endRowPos = 0;
        sysPara->print.ExpiryVar.letterSpace =0;
        sysPara->print.CurDateVar.startColPos = 0;
        sysPara->print.CurDateVar.endRowPos = 0;
        sysPara->print.CurDateVar.letterSpace = 0;
        /////////////////////////////////////////////////////////////////
        if(sysPara->para.EditMode==PICFILE)
        {

            ui->PicWidgetDisp->getPrintDat (dat,0,sysPara);
            ui->PicWidgetDisp->readVar (sysPara,0);

            // qDebug ()<<"v-n1:"<<sysPara->status.variNum<<"v-nLeter1:"<<sysPara->status.vars[0].letterSpace<<"v-nLeter2:"<<sysPara->status.vars[1].letterSpace<<"v-nLeter3:"<<sysPara->status.vars[2].letterSpace;
            sysPara->status.variNum=ui->PicWidgetDisp->getVarNum ();
            sysPara->status.currPrintCol=ui->PicWidgetDisp->getWidth ();
            sysPara->status.currPrintRow=ui->PicWidgetDisp->getPicRealHeight();

            ui->PicWidgetDisp->getCharRamData(sysPara);

        }
        //  end of PICFILE
        else  if(sysPara->para.EditMode==TXTFILE)// TXTFLE
        {
            sysPara->status.addSpace = sysPara->para.checkSpace;
            ontextEdittextChanged();
            coldot = (int)ui->textEdit->document()->size().width();
            if(coldot > (MaxCol4000?MAX_PRINT_COL_NUM_Normal:MAX_PRINT_COL_NUM_Wide))
            {
                coldot = (MaxCol4000?MAX_PRINT_COL_NUM_Normal:MAX_PRINT_COL_NUM_Wide);
                QMessageBox::warning(this, tr("警告"),
                                     tr("最多支持的列数目为:%1请减小信息长度.").arg((MaxCol4000?MAX_PRINT_COL_NUM_Normal:MAX_PRINT_COL_NUM_Wide)));
            }
            int maxPicHeight = MAX_PRINT_ROW_NUM + 12;
            QSize size(coldot,maxPicHeight);

            sysPara->status.currPrintRow =0;
            sysPara->status.currPrintCol = coldot + ( sysPara->status.addSpace?coldot:0) ; //checkSpace


            QImage image(size,QImage::Format_ARGB32);
            image.fill(0x00ffffff);//填充白色
            //image.fill(0x00f0f000);//填充白色
            QPainter painter(&image);
            //image.save("./printImage.jpg");
            ui->textEdit->document()->drawContents (&painter, image.rect());		/*将text写到pic*/

            image.save("./printImage.bmp");
            //ui->widgetPrintTextDisplay
            int firstRow = maxPicHeight;
            /*--------------------------------------------------------------------------*/
            for(int j = 0; j < maxPicHeight; j++){		//计算首行位置
                for(int i = 0; i < coldot; i++){
                    QRgb rgb = image.pixel(i,j);
                    if(rgb !=0x00ffffff )//& 0xff000000)
                    {
                        //qDebug()<<j<< QString().sprintf("%08X",rgb);
                        //if((rgb&0x00FFFFFF)==0)
                        {
                            firstRow = j;
                            break;
                        }
                    }
                }
                if(firstRow != maxPicHeight)
                    break;
            }
            firstRow = 0;
            //qDebug()<<"firstRow"<<firstRow<<maxPicHeight;
            //firstRow = 0;
            /*--------------------------------------------------------------------------*/
            int lastRow = firstRow + MAX_PRINT_ROW_NUM;
            int TempVarNum=0;
            int varLastRow=0;
            lastRow = (lastRow>maxPicHeight)?maxPicHeight:lastRow;
            sysPara->status.ExpiryVarNum=0;
            sysPara->status.CurrDateVariNum = 0;
            sysPara->status.classVariNum = 0;
            sysPara->print.ExpiryVar.startColPos = 0;
            sysPara->print.ExpiryVar.endRowPos = 0;
            sysPara->print.ExpiryVar.letterSpace =0;
            sysPara->print.CurDateVar.startColPos = 0;
            sysPara->print.CurDateVar.endRowPos = 0;
            sysPara->print.CurDateVar.letterSpace = 0;

            //接下来就是要把打印到数据data填充以及确认变量的个数，变量对应的开始列和结束行
            for(int j = 0; j < lastRow - firstRow; j++){  // Y
                for(int i = 0; i < coldot; i++){  //
                    QRgb rgb = image.pixel(i,j + firstRow);
                    // 修改code判断逻辑
                    long unsigned int rgbValue = rgb & COLOR_MASK;

                    if(rgb&0x80000000) {		//判断alpha,rgb<0xFFE0E0E0->过滤偏白背景
                        if((rgb & 0xf0f0ff) == 0xf0f000){				//处理变量， 查找左下角，因为同一行的左下角是对齐的 看起来这个颜色是黄色

                            bool foundvar=0;
                            if(j>0){
                                QRgb r_rgb = image.pixel(i,j + firstRow+1);
                                if((r_rgb & 0xf0f0ff) != 0xf0f000 ){foundvar =1;}
                                //QRgb r_rgb = image.pixel(i,j + firstRow-1);if((r_rgb & 0xf0f0ff) == 0xf0f000 )foundvar =0;
                            }
                            if(foundvar){
                                if(sysPara->status.variNum < MAX_VARI_NUM){
                                    sysPara->status.vars[sysPara->status.variNum].startColPos = i+(sysPara->status.addSpace?i:0);
                                    sysPara->status.vars[sysPara->status.variNum].endRowPos = j;
                                    if(varLastRow<j+1) varLastRow=j+1;
                                    sysPara->status.variNum ++;TempVarNum++;
                                    i+=5;
                                    //qDebug()<<"VARr:"<<TempVarNum<<i<<j;
                                }
                                else TempVarNum++;
                                //dat[MAX_PRINT_ROW_BYTE_NUM*i + j/8] |= 1 << (j%8);			//画黑点
                            }
                        }
                        else  if( (rgbValue == MDT_RGB) || (rgbValue == QR_RGB)  ||
                                  (rgbValue == BAR_RGB)){
                            if(sysPara->status.QRvariNum>=4)continue;
                            if(rgbValue == MDT_RGB) { //MDT
                                handleCode(i,j,&varLastRow, MDT);
                            }
                            else if(rgbValue == QR_RGB) { //QR
                                handleCode(i,j,&varLastRow, QR);
                            }
                            else if(rgbValue == BAR_RGB) { //BAR
                                handleCode(i,j,&varLastRow, BAR);
                            }

                            if(sysPara->status.QRvariNum>=4)sysPara->status.QRvariNum=4;

                        }
                        //else if((rgb & 0xfffff0)==0xff00f0)
                        else if((rgb & 0x00ffffff)==EXPIRY_VARI_RECONISE)
                        {   // 有效期变量 : 处理变量， 查找左下角，因为同一行的左下角是对齐的
                            bool foundExVar=0;
                            if(j>0){
                                QRgb r_rgb = image.pixel(i,j + firstRow+1);
                                if((r_rgb & 0x00ffffff) != EXPIRY_VARI_RECONISE ){foundExVar =1;}
                            }
                            if(foundExVar)
                            {
                                qDebug()<<"expiryVar:";
                                //if(sysPara->status.ExpiryVarNum <3)
                                {
                                    sysPara->print.ExpiryVar.startColPos = i+(sysPara->status.addSpace?i:0);
                                    sysPara->print.ExpiryVar.endRowPos = j;
                                    if(varLastRow<j+1) varLastRow=j+1;
                                    if(sysPara->status.ExpiryVarNum == 0)
                                        sysPara->status.ExpiryVarNum ++;
                                    i+=10;
                                }
                                //else TempVarNum++;
                                //dat[MAX_PRINT_ROW_BYTE_NUM*i + j/8] |= 1 << (j%8);			//画黑点
                            }
                        }
                        else if((rgb & 0xfffff0)==0xff0cf0)
                        {   // 有效期变量 : 处理变量， 查找左下角，因为同一行的左下角是对齐的
                            //qDebug()<<"before found CurDateVar:"<<rgb;
                            bool foundExVar=0;
                            if(j>0){
                                QRgb r_rgb = image.pixel(i,j + firstRow+1);
                                if((r_rgb & 0xfffff0) != 0xff0cf0 ){foundExVar =1;}
                            }
                            if(foundExVar)
                            {
                                //   qDebug()<<"found CurDateVar:";
                                //if(sysPara->status.ExpiryVarNum <2)
                                {
                                    sysPara->print.CurDateVar.startColPos = i+(sysPara->status.addSpace?i:0);
                                    sysPara->print.CurDateVar.endRowPos = j;
                                    if(varLastRow<j+1) varLastRow=j+1;
                                    if(sysPara->status.CurrDateVariNum == 0)
                                        sysPara->status.CurrDateVariNum ++;
                                    i+=10;
                                }

                                //else TempVarNum++;
                                //dat[MAX_PRINT_ROW_BYTE_NUM*i + j/8] |= 1 << (j%8);			//画黑点
                            }
                        }
                        //else if((rgb & 0xffffff)==0x0032c8)
                        else if((rgb & 0x0000ff)>0x0000c0 && (rgb & 0x00ff00)>0x002F00 && (rgb & 0x00ff0000)==0x00000000)
                        {
                            //qDebug()<<"before found class:"<<rgb;
                            //qDebug()<<" found class:"<<i<<j + firstRow;
                            {
                                qDebug()<<"found class:";
                                //if(sysPara->status.classVariNum <3)
                                {
                                    EXPIRYVAR_t *currCLass = &sysPara->print.ClassVari ;
                                    currCLass->startColPos = i+(sysPara->status.addSpace?i:0);
                                    if (currCLass->startColPos>1)
                                        currCLass->startColPos = currCLass->startColPos - 1;
                                    currCLass->endRowPos = j;
                                    if(varLastRow<j+1) varLastRow=j+1;
                                    if(sysPara->status.classVariNum == 0)
                                        sysPara->status.classVariNum ++;
                                    i+=5;
                                }
                            }
                        }
                        else {		//Y = 0.299*R' + 0.587*G' + 0.114*B
                            int y = (((rgb&0xff)*299 + ((rgb>>8)&0xff)*587 + ((rgb>>16)&0xff)*114))/1000;
                            if(y < 125 ) {
                                dat[MAX_PRINT_ROW_BYTE_NUM*(i+(sysPara->status.addSpace?i:0)) + j/8] |= 1 << (j%8);			//画黑点

                                if((j+1) > sysPara->status.currPrintRow) {
                                    sysPara->status.currPrintRow = j+1;
                                }
                            }
                        }
                    }/*判断alpha end*/
                }
            }

            // var
            //qDebug() <<"VarNum"<<TempVarNum;
            if(TempVarNum>8){
                setRunStatus(tr("变量数大于8个，某些变量将不起作用!!!"));
                strTitle=  tr("变量数大于8个，某些变量将不起作用!!!");
                strTitle.append("\r\n");
                strTitle.append(tr("请减少信息中的变量(或计数器)数量."));
                QMessageBox::warning(this, tr("警告"),strTitle,QMessageBox::Ok);
            }

            //qDebug()<<firstRow<<lastRow<< sysPara->status.vars[0].startRowPos<<sysPara->status.vars[0].endRowPos<< sysPara->status.currPrintRow;
            // ==============查找QRV， DMTV，BARV 变量  MAX_QVARI_NUM
            //qDebug()<<"qrvar"<<sysPara->status.QRvariNum;
            searchQrVar();
            //if(sysPara->status.ExpiryVarNum)
            searchExpiryVar();
            //ui->widgetPrintTextDisplay->update();
            //===============
            if(sysPara->status.variNum){
                //
                /*--------------------------------提取变量------------------------------------------*/
                QString pattern = "<img src=\":/(\\d*)/(\\d*)_([a-zA-Z_][a-zA-Z0-9_]*)/../image/digitalWidth(\\d*).bmp\" width=\"(\\d*)\" height=\"(\\d*)\" />";
                QRegExp rx(pattern);
                QString textHtml = ui->textEdit->toHtml();

                int from = 0;
                int varNum = 0;
                // 正常变量
                while(from < textHtml.size() && from != -1) {
                    from = textHtml.indexOf(rx,from);//返回匹配到到起始地址
                    bool ok;

                    if(from != -1){//找到匹配的
                        from ++;
                        if(varNum < sysPara->status.variNum){

                            qDebug() << rx.capturedTexts();

                            sysPara->status.vars[varNum].digitalNum = rx.cap(4).toInt(&ok);//第二个匹配，数字到个数
                            sysPara->status.vars[varNum].bold = (sysPara->status.vars[varNum].digitalNum%100) == 75;
                            if(sysPara->status.vars[varNum].bold)
                                sysPara->status.vars[varNum].digitalNum = sysPara->status.vars[varNum].digitalNum/100;

                            sysPara->status.vars[varNum].type = rx.cap(2).toInt(&ok);//第一个匹配
                            strcpy(sysPara->status.vars[varNum].fontname,rx.cap(3).toUtf8().data());
                            sysPara->status.vars[varNum].width = rx.cap(5).toInt(&ok)*(sysPara->status.addSpace?2:1);
                            sysPara->status.vars[varNum].height = rx.cap(6).toInt(&ok);

                            //qDebug() <<varNum<< "startRowPos=:" << sysPara->status.vars[varNum].startRowPos
                            // << "endRowPos" << sysPara->status.vars[varNum].endRowPos
                            // <<"Height"<<sysPara->status.vars[varNum].height;
                            //sysPara->status.vars[varNum].endRowPos = sysPara->status.vars[varNum].startRowPos + sysPara->status.vars[varNum].height-1;
                            sysPara->status.vars[varNum].startRowPos = sysPara->status.vars[varNum].endRowPos - sysPara->status.vars[varNum].height+1;
                            if(sysPara->status.vars[varNum].startRowPos<0)sysPara->status.vars[varNum].startRowPos=0;
                            //sysPara->status.vars[varNum].startRowPos = sysPara->status.vars[varNum].endRowPos - sysPara->status.vars[varNum].height+(sysPara->status.vars[varNum].height==15||sysPara->status.vars[varNum].height==16?0:1);
                            // qDebug()<<"Hei:"<<sysPara->status.vars[varNum].height;
                            /*-----------------------------------------------------------------------------------------*/
                            int t_x_start_pos = sysPara->status.vars[varNum].startColPos;
                            int t_x_end_pos = t_x_start_pos + sysPara->status.vars[varNum].width ;
                            if(t_x_end_pos > (MaxCol4000?MAX_PRINT_COL_NUM_Normal:MAX_PRINT_COL_NUM_Wide))
                                t_x_end_pos = (MaxCol4000?MAX_PRINT_COL_NUM_Normal:MAX_PRINT_COL_NUM_Wide);
                            int t_y_start_pos = sysPara->status.vars[varNum].startRowPos;
                            int t_y_end_pos = sysPara->status.vars[varNum].endRowPos+1 ;
                            if(t_y_start_pos < 0)
                                t_y_start_pos = 0;
                            for(int i = t_x_start_pos; i < t_x_end_pos; i++){
                                for(int j = t_y_start_pos; j < t_y_end_pos; j++){

                                    dat[MAX_PRINT_ROW_BYTE_NUM*(i+(sysPara->status.addSpace?0:0)) + j/8] &= ~(1 << (j%8));			//将画点取消掉

                                }
                            }

                            sysPara->status.vars[varNum].height = rx.cap(6).toInt(&ok);
                            if(sysPara->status.vars[varNum].height>16  ){
                                if(sysPara->status.vars[varNum].height==24)
                                    ;
                                else {
                                    if(sysPara->status.vars[varNum].startRowPos)
                                    {
                                        sysPara->status.vars[varNum].endRowPos--;
                                        sysPara->status.vars[varNum].startRowPos--;
                                    }
                                }
                            }

                            if(sysPara->status.vars[varNum].type ==  RANDOMNUM)
                            {
                                //qDebug()<<"RAND:"<<sysPara->status.vars[varNum].type<< sysPara->status.vars[varNum].digitalNum;
                                sysPara->status.RandomDigitNum = sysPara->status.vars[varNum].digitalNum;


                            }

                            if(sysPara->status.vars[varNum].type >59 && sysPara->status.vars[varNum].type<70)
                            {
                                sysPara->status.vars[varNum].endRowPos = sysPara->status.vars[varNum].endRowPos-3;
                                sysPara->status.vars[varNum].startRowPos = sysPara->status.vars[varNum].startRowPos-3;
                            }
                            /*-----------------------------------------------------------------------------------------*/
                            int pixelSize = Public::derivePixelSizeFromHeight(sysPara->status.vars[varNum].height);

                            //qDebug()<<"MainWindows"<<sysPara->status.vars[varNum].height<<pixelSize;

                            sysPara->status.vars[varNum].letterSpace = 0;
                            if(sysPara->status.vars[varNum].digitalNum){			//算出letterspace
                                QFont font;
                                //font.setFamily(Public::getFontFamily(pixelSize));
                                font.setFamily(sysPara->status.vars[varNum].fontname); // 20160812
                                //pixelSize==7? font.setFamily(ui->textEditOption->getLabelFontFamily()->text()):font.setFamily(Public::getFontFamily(pixelSize, 0));
                                // font.setPixelSize(pixelSize);
                                font.setPixelSize(sysPara->status.vars[varNum].height);
                                font.setWeight(sysPara->status.vars[varNum].bold?QFont::Bold:QFont::Normal);
                                font.setLetterSpacing(QFont::AbsoluteSpacing, 0);
                                QFontMetrics fontMetrics(font);
                                int charWidth = (fontMetrics.horizontalAdvance("0123456789")) / 10 ;
                                if(sysPara->para.flagOfModuleDecimal || sysPara->para.flagOfModuleHide){
                                    charWidth = (fontMetrics.horizontalAdvance("0123456789.m "))/13;
                                }
                                
                                sysPara->status.vars[varNum].letterSpace =
                                        (sysPara->status.vars[varNum].width - charWidth * sysPara->status.vars[varNum].digitalNum)
                                        / (sysPara->status.vars[varNum].digitalNum);
                                //sysPara->status.vars[varNum].width/sysPara->status.vars[varNum].digitalNum/(sysPara->status.addSpace?2:1) - charWidth;
                            }

                            if(varNum<7) varNum ++;
                        }
                        else
                        {
                            qDebug() << tr("warning,界面上有变量未显示完全");
                        }
                    }
                }
            }

            //if(sysPara->status.variNum) qDebug()<< sysPara->status.vars[0].startColPos<<sysPara->status.vars[0].endRowPos ;

            /*--------------------------------------------------------------------------*/
            generateCharRamData();

            /*---------------------------------------------------------------------------*/
            //sysPara->status.currPrintRow ++;//总的行数，从1~n,而不是从0~n,
            //if(sysPara->status.currPrintRow>39)sysPara->status.currPrintRow=39;
            if(sysPara->status.currPrintRow>MAX_PRINT_ROW_NUM-1) sysPara->status.currPrintRow=MAX_PRINT_ROW_NUM-1;
            bool found=0;

            lastRow = sysPara->status.currPrintRow;
            //qDebug()<<"lastRow:"<<lastRow;
            for(int j = sysPara->status.currPrintRow; j >2 ; j--){		//计算首行位置
                for(int i = 0; i < coldot; i++){
                    if(dat[MAX_PRINT_ROW_BYTE_NUM*i + j/8] & (1 << (j%8))){
                        lastRow = j+1;
                        found=1;//qDebug()<<"fOUND:"<<i<<j<<dat[MAX_PRINT_ROW_BYTE_NUM*i + j/8]<<sysPara->status.currPrintRow;
                        break;
                    }
                }
                if(found)
                    break;
            }
            if(lastRow>MAX_PRINT_ROW_NUM-1)lastRow =MAX_PRINT_ROW_NUM-1;
            if(lastRow<varLastRow)lastRow= varLastRow-1;

            if(lastRow<1) lastRow =1;
            //if(lastRow>20 &&lastRow<=25) lastRow =24;

            sysPara->status.currPrintRow =lastRow;
            //sysPara->status.currPrintRow = (lastRow > varLastRow) ? lastRow : varLastRow; //配合賴工省点打印少行問题

            if(sysPara->status.specialVarPrint.SpecialVarEnable)
            {
                sysPara->devOp->fpgaWr(0xa4b0,(unsigned char *)&sysPara->status.specialVarPrint,sizeof(SpecialVarPrint));  // Send specialVarPrint 20240716
            }
        }
        // end of TxtMode

        // 交替打印
        // sysPara->status.currAlterPrintRow = sysPara->status.currPrintRow/2;


#ifdef _2DCODE_
        if(sysPara->status.QRvariNum) {
            onUpdateDispQRCode(1);
        }
#endif
        //if(sysPara->status.currPrintRow==11) sysPara->status.currPrintRow=12;
        int wmax = sysPara->status.currPrintRow;
        sysPara->status.currAlterPrintRow = sysPara->status.currPrintRow/2;
        if(sysPara->para.alterPrint.enable<1) sysPara->para.AlterMode=0;
        else {
            if(sysPara->para.AlterMode==0)sysPara->para.AlterMode=1;
            wmax = sysPara->status.currAlterPrintRow;
        }
        /*-------------------------------切换到显示窗口-----------------------------------*/
        if(sysPara->status.addSpace)
            ui->widgetPrintTextDisplay->setDisplaySize(sysPara->status.currPrintCol/2,sysPara->status.currPrintRow);
        else ui->widgetPrintTextDisplay->setDisplaySize(sysPara->status.currPrintCol,sysPara->status.currPrintRow);

        ui->widgetPrintTextDisplay->setDisplaySize(sysPara->status.currPrintCol,
                                                   sysPara->para.AlterMode?
                                                   sysPara->status.currAlterPrintRow : sysPara->status.currPrintRow);
        ui->stackedWidgetText->setCurrentWidget(ui->pagePrintTextDisplay);
        ui->stackedWidgetOption->setCurrentWidget(ui->pageOption);
        ui->labelTextWidthHeight->setText(tr("[ %1行 x %2列 ]").arg(wmax).arg(sysPara->status.currPrintCol));
        ui->widgetPrintTextDisplay->update();
        //qDebug()<<"3"<<sysPara->status.currPrintRow;
    }
    previewFlag=0;
}

void MainWindow::showDat(unsigned char * Dat)
{
    Q_UNUSED(Dat);
}
void MainWindow::alterDataPrint(unsigned char m)
{
    if(sysPara)
    {

        ui->widgetPrintTextDisplay->setDisplaySize(sysPara->status.currPrintCol,sysPara->para.AlterMode?sysPara->status.currAlterPrintRow : sysPara->status.currPrintRow);
        emit  ui->widgetPrintTextDisplay->update();

    }
}

void MainWindow::generateCharRamData(){/* 生成字模数据  */
    if(sysPara->status.variNum){
        QTextEdit textEdit;
        textEdit.document()->setDocumentMargin(0);
        textEdit.setLineWrapMode(QTextEdit::NoWrap);
        int ramAddress = 0;
        int i;
        qDebug()<<"sysPara->status.variNum:"<<sysPara->status.variNum;
        for( i = 0; i < sysPara->status.variNum; i++){
            vars_t *p_var = &sysPara->status.vars[i];
            p_var->bassAddr = -1;
            if(p_var->original){				//清除原来的记录
                if(p_var->dat){
                    free(p_var->dat);
                }
                p_var->original = false;
            }

            int width;
            if(p_var->bassAddr == -1){
                if(sysPara->para.flagOfModuleDecimal || sysPara->para.flagOfModuleHide)
                    width = (p_var->digitalNum)?(13*(p_var->width/p_var->digitalNum)):12;
                else
                    width = (p_var->digitalNum)?(10*(p_var->width/p_var->digitalNum)):12;
                int width2 = width;//+(sysPara->status.addSpace?width:0);
                int height = Public::derivePixelSizeFromHeight(p_var->height);
                //                int height = p_var->height;

                textEdit.clear();
                int DPI = textEdit.logicalDpiX();
                DPI = DPI?DPI:1;	//Pixel = DPI * Point / 72

                auto fontFamily = QString(p_var->fontname);
                textEdit.setFontFamily(fontFamily);

                if(sysPara->para.flagOfModuleDecimal || sysPara->para.flagOfModuleHide){
                    textEdit.insertHtml(QString("<span style=\" font-family:'%1'; font-size:%2pt;  font-weight:%3;\">0123456789.m </span>")
                                        .arg(fontFamily)  // 20160812 增加横向字体 p_var->type <9 正常， p_var->type 20～28 左横  p_var->type 40～48 右横
                                        .arg(height*96/DPI).arg(p_var->bold?600:400));	//600表示加粗，400表示普通
                }else{
                    textEdit.insertHtml(QString("<span style=\" font-family:'%1'; font-size:%2pt; font-weight:%3;\">0123456789</span>")
                                        .arg(fontFamily)  // 20160812 增加横向字体 p_var->type <9 正常， p_var->type 20～28 左横  p_var->type 40～48 右横
                                        .arg(height*96/DPI).arg(p_var->bold?600:400));
                }
                
                
                QFont font = textEdit.font();
                font.setLetterSpacing(QFont::AbsoluteSpacing, p_var->letterSpace);
                textEdit.setFont(font);
                // width = p_var->width;
                qDebug() << "letterSpace: " << p_var->letterSpace<< "font:" << font.family()<< "font width:" << width;
                int imgHeight = height + 12;
                QSize size(width,imgHeight);
                QImage image(size,QImage::Format_ARGB32);
                image.fill(0x00ffffff);
                QPainter painter(&image);
                textEdit.show();				//如果不显示，似乎不会绘制
                textEdit.document()->drawContents (&painter, image.rect());		/*将text写到pic*/

                QString fileName = "/home/plg/doc/002.html";
                QTextDocumentWriter writer(fileName);
                bool success = writer.write(textEdit.document());

                textEdit.hide();
                image.save(QString::number(i) + "varRam.png");
                // 找到最下面的行
                int lastValidRow = 0;
                for(int k = imgHeight - 1; k >= 0 ; k--){
                    for(int j = 0; j < width; j ++){
                        QRgb rgb = image.pixel(j,k);
                        if(rgb&0xff000000){
                            lastValidRow = k + 1;
                            break;
                        }
                    }
                    if(lastValidRow != 0)
                        break;
                }

                qDebug()<<"lastValidRow"<<lastValidRow;
                qDebug()<<"GetData"<<p_var->endRowPos<< p_var->startRowPos;
                int rowDiff = p_var->endRowPos - p_var->startRowPos;

                int firstValidRow = -1; // 变量的第一行所处的行地址
                for(int y = 0; y < image.height(); ++y) {
                    for(int x = 0; x < image.width(); ++x) {
                        if(image.pixel(x, y) & 0xff000000) {
                            firstValidRow = y;
                            break;
                        }
                    }

                    if(firstValidRow != -1)
                        break;
                }

                firstValidRow = qMax(firstValidRow, 0);

                int rowByteNum = rowDiff/8 + ((rowDiff%8)?1:0); // 一列占用字节数
                if (rowByteNum > 0) {// 防崩溃保护
                    unsigned char *dat = (unsigned char *)calloc(width2,rowByteNum);
                    for(int k = firstValidRow; k < lastValidRow; k++){
                        for(int j = 0; j < width; j ++){
                            QRgb rgb = image.pixel(j,k);

                            int currRow = k - firstValidRow;
                            if(((rgb >> 24)&0xff) > 0x80){ // 判断是否有效的像素点
                                dat[rowByteNum*(j+(sysPara->status.addSpace?j:0) )+ currRow/8] |= (1<<(currRow%8));
                            }
                        }
                    }
                    p_var->bassAddr = ramAddress;
                    p_var->datHeight = height;

                    p_var->datWidth = width2;
                    p_var->rowByteNum = rowByteNum;
                    p_var->dat = dat;
                    p_var->original = true;
                    p_var->currVal = -1;		//相当于初始化
                    ramAddress += rowByteNum * width2;
                } else {
                    qDebug() << "startRowPos:" << p_var->startRowPos
                             <<" endRowPos:" << p_var->endRowPos
                             <<" rowDiff:" << rowDiff
                            << " 按原逻辑，执行这一步的时候软件就已经崩溃了";
                }

            }
        }
    }
}

void MainWindow::updateTotalCnt(int en)
{
    // No50 USEING
    //sysPara->para.totalProductCnt += (sysPara->status.productCnt>sysPara->status.lastProductCnt)?sysPara->status.productCnt-sysPara->status.lastProductCnt:
    //                                                                                             (sysPara->status.productCnt>=0&&sysPara->status.productCnt<20)?sysPara->status.productCnt:0;
    //if(en) sysPara->para.totalProductCnt=0;

    //sysPara->para.totalProductCnt = sysPara->status.totalProductCnt;  // No51版本改进
    sysPara->status.lastProductCnt = sysPara->status.productCnt;
    ui->labelProductCnt->setText(QString::number(sysPara->status.productCnt));
    ui->labelTotalProductCnt->setText(QString::number( sysPara->para.totalProductCnt+sysPara->status.totalProductCnt));

}
static int numOfTextChange = 0;
void MainWindow::on_pushButtonStartPrint_pressed()
{
    unsigned int type = sysPara->status.fpgaVersionNum >> 12;
    if(sysPara->status.isPrinting){
        qDebug("Mainwindow:  Printing 开始打印");
    }else{
        qDebug("Mainwindow:  Non printing 开始打印");
    }
    static int fileCount = 0;
    fileCount++;
    if(fileCount > 5)
    {
        fileCount = 1;
    }

    if(sysPara){
        bool MaxCol4000;
        if(sysPara->status.flagOfNo67FPGA)
            MaxCol4000 = true;
        else
            MaxCol4000 = false;
        test_flag = 0;
        /******2020/2/29*****/
        if(sysPara->para.printTriggerMode == PRINT_TRIGGER_SYNCHRONIZER && type == 8)   //同步模式下，判断喷印间隔是否设置合理
        {
            QSizeF size = ui->textEdit->document()->size();
            float stroke,print_len_min;
            stroke = sysPara->para.printColDelay/sysPara->para.synPulseNumPerMm;
            print_len_min = stroke * size.width();
            if(print_len_min > sysPara->para.synTriggerPrintLenMm && !sysPara->para.charWidthSetEnable)
            {
                QMessageBox::information(this,tr("错误"),tr("喷印间隔过短,应高于%1!").arg(print_len_min));
                return;
            }
        }
        /******2020/2/29 end*****/
#ifndef FPGATEST
        if(!SIMULATE_PRINTING_MODE){
            if (!sysPara->status.reclainTankReachEnd) {
                return;
            }
            if((sysPara->status.statWarn & WARN_STATUS_HDINT)){
                QMessageBox::information(this,tr("错误"),tr("喷头盖未关,请先关喷头盖!"));
                return ;
            }
            if((sysPara->status.statWarn & WARN_STATUS_INK_SWINT)){
                QMessageBox::information(this,tr("错误"),tr("墨线未开，请先开墨线开关!"));
                return ;
            }
        }
#endif
        sysPara->devOp->highVoltageCtrl(1);
        sysPara->devOp->setHighVoltageAmplitudetoSTM32();
        sysPara->status.waitHightVolOff = 0;
        if(!printingFlag)setRunStatus(tr("正在加高压..."));
        // 复位计数器
        if(sysPara->status.FileChangeRestCntFlag){
            if(sysPara->para.ResetAllProductCntEn)
            {
                sysPara->devOp->clearProductCnt(3 | 0x10); // [3]总产品计数器清零FPGA
                sysPara->para.totalProductCnt=0;
            }
            else if(sysPara->para.ResetProductCntEn)
            {
                sysPara->devOp->clearProductCnt(3);
            }
            sysPara->status.FileChangeRestCntFlag=0;
            sysPara->saveParaToFile();
        }
        if(sysPara->para.EditMode == TXTFILE||sysPara->para.EditMode== PICFILE)
            PreviewPressed();		//生成打印数据，确定变量的位置和对应生成字模
        else if(sysPara->para.EditMode == SCENE)
            onPreviewScene();

        if(numOfTextChange >= 5){
            numOfTextChange = 0;
            emit autoUpdateFontWidthByMainWindow((const unsigned int)sysPara->status.currPrintCol);
        }

        if(sysPara->status.currPrintCol > (MaxCol4000?MAX_PRINT_COL_NUM_Normal:MAX_PRINT_COL_NUM_Wide)){
            QMessageBox::critical(0,tr("错误"),tr("当前总列数 %1 ,支持的总列数为 %2,请减少打印串的长度").arg(sysPara->status.currPrintCol).arg((MaxCol4000?MAX_PRINT_COL_NUM_Normal:MAX_PRINT_COL_NUM_Wide)));
            return ;
        }
        // LogInfo::setRunStatusText(tr("有效打印区域  %1行 x %2 列").arg(sysPara->status.currPrintRow).arg(sysPara->status.currPrintCol));
        //if(sysPara->para.printTriggerMode != PRINT_TRIGGER_SYNCHRONIZER)
        if(!((sysPara->para.printTriggerMode == PRINT_TRIGGER_SYNCHRONIZER)
             ||((sysPara->para.printTriggerMode == PRINT_TRIGGER_ELEC_EYE_VOLTATE_LEVEL
                 ||sysPara->para.printTriggerMode == PRINT_TRIGGER_ELEC_EYE_EDGE)
                && sysPara->para.eleEyeTriggerSynPrintEn))
                )
        {
            int dotNumPerCol = sysPara->status.currPrintRow*(1 + sysPara->para.printRowDelay) + sysPara->para.printColDelay;
            long printTmUs = 1.0f*dotNumPerCol*(1 + sysPara->para.charBold)*sysPara->status.currPrintCol*(2*sysPara->para.divideRatio)/(FPGA_SYS_HZ/1000000);
            if((printTmUs/1000  + 3) > (sysPara->para.printDelayMs)
                    && (sysPara->para.timeTriggerPrintMode == TIME_TRIGGER_PRINT_MODE_HEAD_TO_HEAD)
                    && (sysPara->para.printTriggerMode == PRINT_TRIGGER_TIME )
                    ) // 在电眼方式下，是否需要判呢？
            {
                QMessageBox::critical(0,tr("错误"),tr("打印耗时 %1ms ,触发间隔 :%2ms ,触发间隔至少应当大于打印耗时3ms").arg(printTmUs/1000).arg(sysPara->para.printDelayMs));
                return ;
            }
        }
        sysPara->status.isPrinting=false;

        setRunStatus(tr("开始打印1"));
        qDebug()<<QString("mainwindow 打印内容:%1").arg(ui->textEdit->toPlainText());

        SendPrintDataToFpga(0);  // 0－－正常打印，1－－打印交替部分信息1; 2－－打印交替部分信息2,
        if(sysPara->para.isCheckInsertTime)
        {
            if(!startPrintingFlag)
            {
                LogInfo::setRunStatusText(tr("开始打印"));
            }
        }
        else
        {
            LogInfo::setRunStatusText(tr("开始打印"));
        }
        /*-------------------------------------------------------------------*/
        ui->labelSynColDelay->setText("");
        sysPara->status.lastSynColDelay = -1;			//目的是为了清空原来的数据
        /*--------------------------------暂停按钮------------------------------*/
        ui->pushButtonPausePrint->setEnabled(true);
        // ui->pushButtonPausePrint->setText(tr("暂停打印"));
        /*---------------------------------开关回收槽------------------------------*/
        enableReclaimCtrlButton(false);
        updatePrintDisplayLabel();
        // 20170717 移动此，以观察条形码打印异常问题。
        if(!startPrintingFlag)
        {
            sysPara->devOp->printCtrl(PRINT_CTRL_START);
            printingFlag = true;
        }
        else
        {
            //如果已经在打印，则不要在发送start命令，只要更新相应的数据即可
            if(!printingFlag)		//如果在暂停，重复取消暂停
                on_pushButtonPausePrint_pressed();
        }
        startPrintingFlag = true;sysPara->status.isPrinting=true;
    }
}
unsigned char blankDat1[BLANK_COL_NUM*MAX_PRINT_ROW_BYTE_NUM]={0};
void MainWindow::SendPrintDataToFpga(unsigned char alterEnable)
{
    if(!sysPara) return ;
    fileChange=false;

    sysPara->devOp->writeFpgaPrintPara(1);	/*务必放在最后一步*/
    sysPara->devOp->writeFpgaVariCtrl();

    sysPara->devOp->fpgaWr(0,blankDat1,sizeof(blankDat1));//...所加的空白偏移地址
    // 交替打印处理
    unsigned char *dat;
    size_t sizeofdat;
    bool MaxCol4000;
    if(sysPara->status.flagOfNo67FPGA)
        MaxCol4000 = true;
    else
        MaxCol4000 = false;
    if(MaxCol4000){
        dat =sysPara->status.printDat_Normal;
        sizeofdat = sizeof(sysPara->status.printDat_Normal);
    }else{
        dat =sysPara->status.printDat;
        sizeofdat = sizeof(sysPara->status.printDat);
    }
    if(sysPara->status.currPrintCol* MAX_PRINT_ROW_BYTE_NUM <= 20000)
        sysPara->devOp->fpgaWr(sizeof(blankDat1),dat, sysPara->status.currPrintCol* MAX_PRINT_ROW_BYTE_NUM);
    else
        sysPara->devOp->fpgaWrD2(sizeof(blankDat1),dat, sysPara->status.currPrintCol* MAX_PRINT_ROW_BYTE_NUM);
}
int MainWindow::getCurrPrintStatus()
{
    int printStatus;
    if (startPrintingFlag ) {
        if(printingFlag) {
            printStatus = 1;   // 正在打印
        }
        else {
            printStatus = 2;   // 暂停喷印
        }
    }
    else {
        printStatus = 3;      // 停止打印
    }
    return printStatus;
}

void MainWindow::updatePrintDisplayLabel(){
    if(sysPara && !sysPara->status.reclainTankReachEnd){
        setRunStatus(tr("回收槽未到底!!!!!!"));
    }
    else  if(startPrintingFlag ){
        if(printingFlag)
            setRunStatus(tr("正在喷印..............."));
        else
            setRunStatus(tr("暂停喷印..............."));
    }
    else
        setRunStatus("");
}

void MainWindow::on_pushButtonStopPrint_pressed()
{
    if(sysPara->status.isPrinting){
        qDebug("Mainwindow:  Printing 停止打印");
    }else{
        qDebug("Mainwindow:  Non printing 停止打印");
    }

    if(sysPara){

#ifndef FPGATEST
        if (!sysPara->status.reclainTankReachEnd && !SIMULATE_PRINTING_MODE) {
            return;
        }
#endif

        sysPara->status.flagOfAbnormalStatus = false;
        sysPara->status.isPrinting=false;
        sysPara->devOp->printCtrl2(1);
        sysPara->devOp->printCtrl( PRINT_CTRL_STOP);//:PRINT_CTRL_STOPSYNCNT
        LogInfo::setRunStatusText(tr("停止打印"));
        ui->pushButtonStartPrint->setEnabled(true);

        ui->pushButtonPausePrint->setEnabled(false);
        // ui->pushButtonPausePrint->setText(tr("暂停打印"));
        enableReclaimCtrlButton(true);
        printingFlag = false;
        startPrintingFlag = false;
        updatePrintDisplayLabel();
        sysPara->status. waitHightVolOff = 1;
        sysPara->saveParaToFile();					// 将相关配置保存

        if(sysPara->status.RandomBackCnt>5 && (sysPara->status.RandomNum>0))
        {
            QMessageBox::StandardButton ret;
            ret = QMessageBox::warning(this, tr("提示"),
                                       tr("随机码文本将展出到U盘，请插入U盘"),
                                       QMessageBox::Ok | QMessageBox::Cancel);
            if (ret == QMessageBox::Ok){
                LogInfo::setRunStatusText("正在导出随机码文件到U盘......");
                sysPara->devOp->RandTxtBakup(0); //备份到U盘
                LogInfo::setRunStatusText("随机码文件导出完成.");
            }
        }
    }
}

void MainWindow::on_pushButtonPausePrint_pressed()
{
    if(sysPara){
        if(sysPara->status.WorkTimeOut && !SIMULATE_PRINTING_MODE) { sysPara->devOp->printCtrl(PRINT_CTRL_STOP);
            return;
        }
        if (!sysPara->status.reclainTankReachEnd && !SIMULATE_PRINTING_MODE) {
            return;
        }
        sysPara->devOp->printCtrl(PRINT_CTRL_PAUSE);
        LogInfo::setRunStatusText(printingFlag?tr("暂停打印"):tr("继续打印"));
        ui->pushButtonStartPrint->setEnabled(true);
        printingFlag = !printingFlag;
        if(printingFlag)
        {
            ui->pushButtonPausePrint->setText(tr("继续打印\n保持高压"));
            ui->pushButtonPausePrint->setStyleSheet("QPushButton{color:rgb(0, 255, 0)}");
            sysPara->devOp->highVoltageCtrl(sysPara->para.HighVoltageAmplitude);
        }
        else
        {
            ui->pushButtonPausePrint->setText(tr("暂停打印\n停止高压"));
            ui->pushButtonPausePrint->setStyleSheet("QPushButton{color:rgb(255, 0, 0)}");
        }
        updatePrintDisplayLabel();
        sysPara->saveParaToFile();					// 将相关配置保存

        if(sysPara->status.RandomBackCnt>5 && (sysPara->status.RandomNum>0))
        {
            QMessageBox::StandardButton ret;
            ret = QMessageBox::warning(this, tr("提示"),
                                       tr("随机码文本将展出到U盘，请插入U盘"),
                                       QMessageBox::Ok | QMessageBox::Cancel);
            if (ret == QMessageBox::Ok){
                LogInfo::setRunStatusText("正在导出随机码文件到U盘......");
                sysPara->devOp->RandTxtBakup(0); //备份到U盘
                LogInfo::setRunStatusText("随机码文件导出完成.");
            }
        }
    }
}

void MainWindow::resetReclaimCtrlButtonText(){
    ui->pushButtonReclaimTanOpen->setText(tr("开"));
    ui->pushButtonReclaimTankClose->setText(tr("关"));
}

void MainWindow::enableReclaimCtrlButton(bool enable) {
    ui->pushButtonReclaimTanOpen->setEnabled(enable);
    ui->pushButtonReclaimTankClose->setEnabled(enable);
}

void MainWindow::enablePushButtonStart(bool enable)
{
    ui->pushButtonStart->setEnabled(enable);
}

void MainWindow::enablePrintButton(bool enable){
    ui->pushButtonPausePrint->setEnabled(false);
#ifdef FPGATEST
    enable = true;
#endif

    ui->pushButtonStartPrint->setEnabled(enable);
    ui->pushButtonStopPrint->setEnabled(enable);
}

static int mainInkPumpCtrlStatus = 0;
static int mainInkPumpCtrlCnt = 0;
//100ms 为单位
void MainWindow::airPushingProcess()
{
    if(sysPara){
        if (sysPara->status.airPushing) {
            //qDebug()<< "start airPushingProcess "<<sysPara->status.airPushingOnTime;
            // 执行排气 7 秒
            setRunStatus(tr("正在排气 ..............."));
            ++sysPara->status.airPushingOnTime;
            if(sysPara->status.airPushingOnTime >= 50) {
                static int delayCount = 0;
                ++delayCount;
                m_2sFlag = true;
                //sysPara->devOp->controlInkValve(false); //关供墨阀
                if(delayCount >= 40)
                {
                    m_2sFlag = false;
                }

                if(delayCount >= 60)
                {
                    delayCount = 0;
                    airPushTimer->stop();
                    sysPara->devOp->controlViscosityPump(false);
                    reclaimTanOpen();
                    //qDebug()<< "start stop";
                    sysPara->status.airPushingDone = 1;
                    sysPara->status.airPushing = 0;
                    sysPara->status.airPushingOnTime = 0;
                }


                return;
            }

            if (sysPara->status.airPushingOnTime%10 >= 5) {
                sysPara->devOp->controlCycleValve(true);
            }
            else {
                sysPara->devOp->controlCycleValve(false);
            }
            if (mainInkPumpCtrlStatus == 0) {
                if(++mainInkPumpCtrlCnt > 15) { //100ms 为单位, 时间到关闭
                    sysPara->devOp->controlMainInkPump(false);
                    sysPara->devOp->mainInkCtrl();
                    mainInkPumpCtrlStatus = 1;
                    mainInkPumpCtrlCnt = 0;
                }
            }
            else if (mainInkPumpCtrlStatus == 1) { //100ms 为单位, 时间到开启
                sysPara->devOp->controlMainInkPump(true);
                sysPara->devOp->mainInkCtrl();
                mainInkPumpCtrlStatus = 2;
            }
            else if (mainInkPumpCtrlStatus == 2) {
                if(++mainInkPumpCtrlCnt>7) {
                    sysPara->devOp->controlMainInkPump(false);
                    sysPara->devOp->mainInkCtrl();
                    mainInkPumpCtrlStatus = 3;
                    mainInkPumpCtrlCnt = 0;
                }
            }
            else if (mainInkPumpCtrlStatus == 3) {
                if(++mainInkPumpCtrlCnt>8) {
                    sysPara->devOp->controlMainInkPump(true);
                    sysPara->devOp->mainInkCtrl();
                    mainInkPumpCtrlStatus = 4;
                    mainInkPumpCtrlCnt = 0;
                }
            }
            else if (mainInkPumpCtrlStatus == 4) {
                if(++mainInkPumpCtrlCnt>8) {
                    sysPara->devOp->controlMainInkPump(false);
                    sysPara->devOp->mainInkCtrl();
                    mainInkPumpCtrlStatus = 3;
                    mainInkPumpCtrlCnt = 0;
                }
            }
        }
    }
}

void MainWindow::reclaimTanOpen()
{
    // 还原当前模式
    if (sysPara->status.airPushing) {
        sysPara->status.isPumpValveControledByHand = sysPara->status.byHandStore;
    }
    sysPara->status.isPumpValveControledByHand = false;
    sysPara->devOp->mainInkCtrl();
    sysPara->devOp->controlReclaimTankClose(false);//开回收槽之前先让关回收槽停止
    MySleep(1000);
    sysPara->devOp->controlReclaimTankOpen(!sysPara->devOp->isReclaimTankOpenEnable());
    ui->pushButtonReclaimTanOpen->setText(sysPara->devOp->isReclaimTankOpenEnable()?tr("停止"):tr("开"));
    ui->pushButtonReclaimTankClose->setText(tr("关"));
    enablePrintButton(SIMULATE_PRINTING_MODE);
    sysPara->devOp->highVoltageCtrl(0);		/*回收槽动作的时候务必关高压*/
    //    sysPara->status.reclaimTankstatus = 1;
    setRunStatus(sysPara->devOp->isReclaimTankOpenEnable()?tr("正在打开回收槽..."):tr("停止打开"));
    if (!sysPara->para.reclaimTankTime) {
        LogInfo::setRunStatusText(tr("警告!回收槽开关时间未设置!"));
    }
    sysPara->status.currReclaimOperationCnt = 0;
    sysPara->status.reclainTankReachEnd = false;
    sysPara->status.reclainOpenAppending = true;
    sysPara->status.reclainCloseAppending = false;
    sysPara->status.reclaimBlockedCnt = 0;
    sysPara->status.canRunAirPushing = false;
}

void MainWindow::handleCode(int col, int row, int *varLastRow, int type)
{
    int idx = sysPara->status.QRvariNum;
    sysPara->print.QRvars[idx].type=type;
    sysPara->print.QRvars[idx].countEn=1;
    sysPara->print.QRvars[idx].Counter=sysPara->status.productCnt;
    sysPara->print.QRvars[idx].startColPos=col+(sysPara->status.addSpace?col:0);
    sysPara->print.QRvars[idx].endRowPos=row+1;
    if(*varLastRow<row+1) *varLastRow=row+1;
    sysPara->status.QRvariNum++;
}

void MainWindow::handleCodeScene(int col, int row, int *varLastRow, int type, int textItemPosX, int textItemPosY)
{
    int idx = sysPara->status.QRvariNum;
    sysPara->print.QRvars[idx].type=type;
    sysPara->print.QRvars[idx].countEn=1;
    sysPara->print.QRvars[idx].Counter=sysPara->status.productCnt;
    sysPara->print.QRvars[idx].startColPos=col+(sysPara->status.addSpace?col:0)+textItemPosX;
    sysPara->print.QRvars[idx].endRowPos=row+1+textItemPosY;
    if(*varLastRow<row+1) *varLastRow=row+1;
    sysPara->status.QRvariNum++;
}

void MainWindow::on_pushButtonReclaimTanOpen_pressed()
{
    if(sysPara){
        if (!sysPara->status.reclaimTankBlockedAppending) {
            if (sysPara->status.canRunAirPushing && (sysPara->status.currReclaimTankPos == 0)) { // 回收槽关闭的情况下才可以执行排气;//2019/10/24 当回收槽未在顶的位置，不需要排气
                if (!sysPara->status.airPushing) { // 先执行排气后开回收槽
                    sysPara->status.byHandStore = sysPara->status.isPumpValveControledByHand;
                    sysPara->status.isPumpValveControledByHand = true;
                    sysPara->devOp->mainInkCtrl();
                    sysPara->devOp->controlCycleValve(true);
                    sysPara->devOp->controlViscosityPump(false);//关粘度泵
                    sysPara->devOp->controlMainInkPump(true);//主墨泵敞开
                    sysPara->devOp->mainInkCtrl();
                    sysPara->devOp->controlReclaimPump(true, false); // 回收泵开
                    sysPara->devOp->controlInkValve(true); //墨水阀
                    sysPara->devOp->controlInkValvePWM(true); //墨水阀
                    //qDebug()<< "start airpushings";

                    sysPara->status.airPushing = 1;
                    sysPara->status.airPushingDone = 0;
                    sysPara->status.airPushingOnTime = 0;
                    airPushTimer->start(100); // 100ms
                }
            }
            else
                reclaimTanOpen();
        }
        if(sysPara->status.reclaimTankBlockedAppending) {
            sysPara->status.reclaimTankBlockedAppending = false;
            QMessageBox::StandardButton ret;
            ret = QMessageBox::warning(this, tr("警告"),
                                       tr("回收槽之前发生阻塞或回收槽时间设置错误，是否强制将当前位置设为到顶位置?"),
                                       QMessageBox::Ok | QMessageBox::Cancel);
            if (ret == QMessageBox::Ok){
                sysPara->para.reclaimTankTime = sysPara->status.currReclaimTankPos/10;
                onReclainTankPositionChanged(sysPara->para.reclaimTankTime * 10);
            }
        }
    }
}

void MainWindow::on_pushButtonReclaimTankClose_pressed()
{
    if(sysPara){
        if(sysPara->status.reclaimTankBlockedAppending){
            sysPara->status.reclaimTankBlockedAppending = false;
            QMessageBox::StandardButton ret;
            ret = QMessageBox::warning(this, tr("警告"),
                                       tr("回收槽之前发生阻塞或回收槽时间设置错误，是否强制将当前位置设为到顶位置?"),
                                       QMessageBox::Ok | QMessageBox::Cancel);
            if (ret == QMessageBox::Ok){
                sysPara->status.currReclaimTankPos = 0;
                onReclainTankPositionChanged(0);
            }
        }

        sysPara->devOp->controlReclaimTankClose(!sysPara->devOp->isReclaimTankCloseEnable());
        ui->pushButtonReclaimTanOpen->setText(tr("开"));
        ui->pushButtonReclaimTankClose->setText(sysPara->devOp->isReclaimTankCloseEnable()?tr("停止"):tr("关"));
        enablePrintButton(SIMULATE_PRINTING_MODE);
        sysPara->devOp->highVoltageCtrl(0);
        //        sysPara->status.reclaimTankstatus = 2;
        setRunStatus(sysPara->devOp->isReclaimTankCloseEnable()?tr("正在关闭回收槽..."):tr("停止关闭"));
        if(!sysPara->para.reclaimTankTime){
            LogInfo::setRunStatusText(tr("警告!回收槽开关时间未设置!"));
        }
        sysPara->status.currReclaimOperationCnt = 0;
        sysPara->status.reclainTankReachEnd = false;
        sysPara->status.reclainOpenAppending = false;
        sysPara->status.reclainCloseAppending = true;
        sysPara->status.reclaimBlockedCnt = 0;

    }
}

void MySleep(unsigned int msec);
/*
 *  关机前务必保存参数
 * */
void MainWindow::checkForPowerOff(){
    if(sysPara->status.powerOffAppending){
        if(!sysPara->status.selfCheckDone)
            sysPara->status.selfCheckDone = true;
        this->setDisabled(true);
        emit setDisableAll();
        ////////关机时提高转速和回收泵压力，粘度泵和循环阀/////
        quint16 gearPumpValue_backup = sysPara->para.gearPumpValue;
        int reclaimPumpPWMWidth_backup = sysPara->para.reclaimPumpPWMWidth;;
        if(!(sysPara->status.statWarn & WARN_STATUS_INK_WARN))
        {
            if(!TEST_MODE && sysPara->para.flagOfReclaimPumEnable){
                for(int i=25;i>21;i--)
                {
                    if(i == 25){
                        sysPara->status.isPumpValveControledByHand = true;		//停止自动
                        sysPara->devOp->controlInkValve(true);
                        sysPara->devOp->controlInkValvePWM(true);
                        sysPara->devOp->controlReclaimPump(true,true);
                        sysPara->devOp->controlViscosityPump(true);
                        sysPara->devOp->controlCycleValve(true);
                        sysPara->para.gearPumpValue = 0;
                        sysPara->devOp->WriteMoterPump();
                    }
                    if(i == 22){
                        sysPara->devOp->controlInkValve(false);
                        sysPara->devOp->controlInkValvePWM(false);
                    }
                    this->setRunStatus(tr("正在准备关机,请等待%1秒...............").arg(i*2));
                    MySleep(2000);
                }
            }
            sysPara->devOp->controlReclaimTankOpen(true);
            sysPara->status.isPumpValveControledByHand = true;		//停止自动
            if(sysPara->para.gearPumpEnable ){
                if(!sysPara->para.flagOfReclaimPumEnable){
                    sysPara->para.gearPumpValue = 360;
                    sysPara->devOp->WriteMoterPump();
                }
                else{
                    sysPara->devOp->controlReclaimPump(true,false);
                    sysPara->para.gearPumpValue = 0;
                    sysPara->devOp->WriteMoterPump();
                }
            }
            else{
                sysPara->para.reclaimPumpPWMWidth = 95;
                sysPara->devOp->controlReclaimPump(true,true);
            }

            if(!sysPara->devOp->isViscosityPumpOpen())
                sysPara->devOp->controlViscosityPump(true);
            sysPara->devOp->controlCycleValve(true);
            sysPara->devOp->controlInkValve(false);		//关供墨
            sysPara->devOp->controlInkValvePWM(false);		//关供墨

            if(!TEST_MODE){
                for(int i=14;i>7;i--)
                {
                    if(i==13)
                        sysPara->devOp->controlReclaimTankOpen(false);
                    this->setRunStatus(tr("正在准备关机,请等待%1秒...............").arg(i*3));
                    MySleep(3000);
                }
            }

            if(!sysPara->status.lostCommuFlag){
                sysPara->para.calandar_and_dat.cnt1CurrValue = QString::number(sysPara->status.calandar_and_dat.cnt1CurrValue,16).toInt();
                sysPara->para.calandar_and_dat.cnt2CurrValue = QString::number(sysPara->status.calandar_and_dat.cnt2CurrValue,16).toInt();
                sysPara->para.Counter3.cnt3CurrValue = QString::number(sysPara->status.Status_Counter3.cnt3CurrValue,16).toInt();

                updateTotalCnt(0);
                sysPara->saveParaToFile();					// 关机前将相关配置保存
            }
            sysPara->status.powerOffAppending = false;
            if(!TEST_MODE){
                for(int i=7;i>0;i--)
                {
                    if(i == 3)
                        sysPara->devOp->controlReclaimTankClose(true);
                    if(i == 2){
                        sysPara->devOp->controlViscosityPump(false);
                        sysPara->devOp->controlCycleValve(false);
                        sysPara->devOp->controlReclaimPump(false,false);
                        sysPara->para.gearPumpValue = 0;
                        sysPara->devOp->WriteMoterPump();
                    }
                    this->setRunStatus(tr("正在准备关机,请等待%1秒...............").arg(i*3));
                    MySleep(3000);
                }
            }
        }
        emit CloseJd();
        sysPara->para.gearPumpValue=gearPumpValue_backup;
        sysPara->para.reclaimPumpPWMWidth = reclaimPumpPWMWidth_backup;
        sysPara->devOp->controlCompressPump(false);
        setRunStatus(tr("准备关机......"));
        qDebug()<<"准备关机";
        sysPara->para.totalProductCnt +=sysPara->status.totalProductCnt;
        sysPara->devOp->clearProductCnt(3 | 0x10);//总产器计数器立即清零
        sysPara->para.ReadFileErrorCnt=0;
        sysPara->para.PowerOnErrorCnt=0;
        if(sysPara->para.isCntSaveStateValue)
        {
            sysPara->para.cnt1CurrValue = QString::number(sysPara->status.calandar_and_dat.cnt1CurrValue,16).toInt();
            sysPara->para.cnt2CurrValue = QString::number(sysPara->status.calandar_and_dat.cnt2CurrValue,16).toInt();
            sysPara->para.cnt3CurrValue = QString::number(sysPara->status.Status_Counter3.cnt3CurrValue,16).toInt();
        }
        updateTotalCnt(0);
        sysPara->saveParaToFile();					// 关机前将相关配置保存
        sysPara->saveRFIDPara();
        system("sync");//缓存同步

        timerPowerOff->start(1000);
    }
}

static int numOfPowerOffCMD = 0;
void MainWindow::sendPowerOffCmd(){
    if(++numOfPowerOffCMD == 120){
        sysPara->devOp->color_flag = 2;
        setRunStatus(tr("关机失败!!!"));
        timerPowerOff->stop();
        numOfPowerOffCMD = 0;
        return;
    }
    sysPara->devOp->powerOff();
}

void MainWindow::powerOffConfirmed(){
    timerPowerOff->stop();
    QProcess process;
    process.startDetached("poweroff");
    qApp->exit(0);
}

void MainWindow::on_pushButtonStart_pressed()
{
    QMessageBox::StandardButton ret;
    if(pushButtonFlag)
        ret = QMessageBox::information(this, tr("提示"),
                                       tr("是否关闭齿轮泵,关闭齿轮泵会导致墨水停止流动!"),
                                       QMessageBox::Ok | QMessageBox::Cancel);
    else
        ret = QMessageBox::information(this, tr("提示"),
                                       tr("是否启动齿轮泵?"),
                                       QMessageBox::Ok | QMessageBox::Cancel);
    if (ret == QMessageBox::Ok){
        pushButtonFlag = !pushButtonFlag;
        if(pushButtonFlag)
        {
            ui->pushButtonStart->setStyleSheet("QPushButton{background-color:rgb(0, 255, 0)}");
            ui->pushButtonStart->setText(tr("泵启动"));
        }
        else
        {
            ui->pushButtonStart->setStyleSheet("QPushButton{background-color:rgb(255, 0, 0)}");
            ui->pushButtonStart->setText(tr("泵停止"));
        }
        //ui->pushButtonStart->setEnabled(false);
        emit pushButtonStartPressed(pushButtonFlag);
    }
}

void MainWindow::_on_pushButtonPowerOff_pressed(bool notice){
    if(sysPara){
        if(sysPara->status.currReclaimTankPos != 0)
        {
            QMessageBox::StandardButton ret = QMessageBox::Ok;
            if(notice)
                ret = QMessageBox::warning(this, tr("警告"),
                                           tr("回收槽未关，是否关闭回收槽后关机!"),
                                           QMessageBox::Ok | QMessageBox::Cancel);
            if (!notice || ret == QMessageBox::Ok){

                system((char *)((QString("mkdir %1").arg(TESTDIR)).toLatin1().data()));
                system((char *)((QString("cp %1/*.bin %2/. ").arg(PARA_ROOT_DIR).arg(TESTDIR)).toLatin1().data())); //先备份UP*
                sysPara->status.reclaimCloseCnt=10;
                on_pushButtonStopPrint_pressed();
                on_pushButtonReclaimTankClose_pressed();
                sysPara->status.powerOffAppending = true;
                enableReclaimCtrlButton(false);			//所有的按钮全部屏蔽
            }
        }
        else {
            QMessageBox::StandardButton ret = QMessageBox::Ok;
            if(notice)
                ret = QMessageBox::warning(this, tr("警告"),
                                           tr("是否确认关机?"),
                                           QMessageBox::Ok | QMessageBox::Cancel);

            if (!notice || ret == QMessageBox::Ok){
                sysPara->status.powerOffAppending = true;
                checkForPowerOff();
            }
        }
    }
}


void MySleep(unsigned int msec)
{
    QTime dieTime = QTime::currentTime().addMSecs(msec);
    while( QTime::currentTime() < dieTime )
        QCoreApplication::processEvents(QEventLoop::AllEvents, 100);
}

//extern MyInputMethod *myInputMethod;

void MainWindow::ontextEdittextChanged()
{
    bool MaxCol4000;
    if(sysPara->status.flagOfNo67FPGA)
        MaxCol4000 = true;
    else
        MaxCol4000 = false;
    QSizeF size = ui->textEdit->document()->size();
    sysPara->status.textEditTotalCol = size.width();
    //编辑界面
    ui->labelTextWidthHeight->setText(tr("[ %1行 x %2列 ]").arg(size.height()).arg(size.width()));
    if(size.width() > (MaxCol4000?MAX_PRINT_COL_NUM_Normal:MAX_PRINT_COL_NUM_Wide)){
        myInputMethod->getInputMethod()->on_Key_Backspace_released();
        MySleep(300);
    }
    if(size.width() == 0)
    {		//在通过关标选择文本然后删除的时候，不会调用cursorPosition事件
        onTextEditCursorPositionChanged();
    }

    if(0<size.width() && ++numOfTextChange > 10)
    {
        numOfTextChange = 0;
        emit autoUpdateFontWidthByMainWindow((const unsigned int)size.width());
    }
}
QPoint QTextCursorPos(const QTextEdit * myTextEdit)
{
    QPoint pt;
    QTextCursor tc=myTextEdit->textCursor();
    QTextLayout *pLayout=tc.block().layout();
    pt.setY(tc.position()-tc.block().position());
    pt.setX(pLayout->lineForTextPosition(pt.y()).lineNumber()+tc.block().firstLineNumber());
    return pt;
}

extern MyInputMethod *myInputMethod;
void MainWindow::onTextEditCursorPositionChanged(){
    for(int i = 0; i < 2; i++){
        QTextCharFormat fmt = ui->textEdit->currentCharFormat ();
        QString s = ui->textEdit->document()->toPlainText();
        QFont font = fmt.font();
        QLabel *labelFontSize = ui->textEditOption->getLabelFontSize();
        QLabel *labelFontFamily = ui->textEditOption->getLabelFontFamily();
        QCheckBox *checkBoxBold = ui->textEditOption->getCheckBoxBold();
        bool ok;
        //qDebug()<<"onTextEditCursorPositionChanged"<< font.family()<<labelFontSize->text().toInt(&ok,10)<<s.length()<<s;
        if(labelFontSize && checkBoxBold){
            int DPI = labelFontSize->logicalDpiX();
            DPI = DPI?DPI:1;
            int pixeSize = font.pointSizeF()*DPI/72;
            if(pixeSize >= Public::getMinFontPixelSize()){
                labelFontSize->setText(QString::number(Public::getAdjustedPixelSize(pixeSize)));
                checkBoxBold->setChecked(font.weight() == QFont::Bold);
                labelFontFamily->setText(font.family());
                barcode->setFontSize(Public::getAdjustedPixelSize(pixeSize));
                break;
            }
            else {
                if(s.length()<=1) {
                    ui->textEdit->selectAll();
                    font.setFamily(Public::getFontFamily(labelFontSize->text().toInt(&ok,10) ));
                    ui->textEditOption->setFontFormat();		//设置完格式后，在第二轮重设字体
                    ui->textEdit->moveCursor(QTextCursor::End);
                } else
                    ui->textEditOption->setFontFormat();		//设置完格式后，在第二轮重设字体
            }
        }
    }

}

void MainWindow::onLabelFaultRusumePressed(){
    if(sysPara){
        sysPara->status.flagOfSpeedAlarm = false;
        sysPara->status.mainInkPumpError = false;
        sysPara->status.mainInkPumpRunTmCnt = 0;
        sysPara->status.compressPumpError = false;
        sysPara->status.compressPumpRunTmCnt = 0;
        sysPara->devOp->resumeFault();
        ui->labelRunStatus->clear();
        sysPara->status.beeperOnFlag = false;
        sysPara->devOp->controlBeeper(false);
        sysPara->status.heaterONTimeCnt = 0;		//加热块计数清零
        ui->labelStatusChargefault->setPixmap(QPixmap(QString::fromUtf8(":/image/ALARMGreen.PNG")));
        sysPara->status.DACDisable = false;
        sysPara->status.lastPhaseFault = 0;
        sysPara->status.phaseErrorCnt = 0;
        if(sysPara->status.lastHighVoltageFault && !(sysPara->status.statWarn & WARN_STATUS_POWER_MON)){
            sysPara->status.lastHighVoltageFault = false;
            flagOfClearHighVltageWarnning = true;
        }

        if(sysPara->status.gearPumpRunStopFlag && pushButtonFlag)
        {
            emit repeatInitedPid();
            sysPara->status.gearPumpRunStopFlag = false;//齿轮泵报警恢复
        }
        if((sysPara->devOp->color_flag == 2) ||(sysPara->devOp->color_flag == 1))
        {
            sysPara->devOp->color_flag = 3;
            sysPara->devOp->controlYellowLight(false);
            sysPara->devOp->controlRedLight(false);
        }
        sysPara->status.visocityValueOverflowNum = 0;

        if(sysPara->status.visocityValueOverflowNum>=MAX_ALLOW_VISICOSITY_OVERFLOW_NUM) //
            sysPara->status.viscosityFault = 0;

        sysPara->status.powerOffAfterPhaseFaultAppending = 0;
        sysPara->status.lastwarmInkPump = 0;
        sysPara->status.RecycleWarnCnt =0;
        sysPara->status.lastRecycleWarn =0 ;
        sysPara->status.powerOffAfterInkOrSOLVEmptyAppending=0;
        //sysPara->status.lastStatWarn=0;  // 机器报故障后，点击故障恢复按钮，再点击打印按钮，“正在喷印中…”字符未立即显示出来，需等待大约10秒才会出现。
        //LogInfo::setRunStatusText(tr("故障恢复"));
        sysPara->status.RecycleWarnCnt=0;
        sysPara->status.HVFaultCloseEn=0;
        if(sysPara->status.flagOfPressureFault){
            sysPara->status.flagOfPressureFault = false;
            sysPara->status.isPumpValveControledByHand = false;
            sysPara->devOp->mainInkCtrl();
            emit clearPressureFault();
        }
        if(printingFlag) {
            sysPara->devOp->highVoltageCtrl(sysPara->para.HighVoltageAmplitude);
        }
    }
}

void MainWindow::onEnableReclaimCtrlButton(bool flag)
{
    enableReclaimCtrlButton(flag);
}

void MainWindow::onInkJetPrinterCurrentChanged(int index)
{
    ui->senceEditOption->onInkJetPrinterCurrentChanged(index);
}

void MainWindow::onLabelProductCntPressed(){
    if(sysPara){
        QMessageBox::StandardButton ret;
        ret = QMessageBox::warning(this, tr("警告"),
                                   tr("是否初始化产品计数?"),
                                   QMessageBox::Ok | QMessageBox::Cancel);
        if (ret == QMessageBox::Ok){
            updateTotalCnt(0);
            sysPara->devOp->clearProductCnt(1);
            sysPara->saveParaToFile();

        }
    }
}

void MainWindow::onLabelTotalProductCntPressed(){
    if(sysPara){
        QMessageBox::StandardButton ret;
        ret = QMessageBox::warning(this, tr("警告"),
                                   tr("是否清除总产品计数?"),
                                   QMessageBox::Ok | QMessageBox::Cancel);
        if (ret == QMessageBox::Ok){
            sysPara->devOp->clearProductCnt(1  | 0x10 );// [3]总产品计数器清零FPGA
            sysPara->para.totalProductCnt = 0;

        }
    }
}

void MainWindow::onPushButtonCNTResetNowPressed(){
    if(sysPara){
        //        emit closeSerial();

        QMessageBox::StandardButton ret;
        ret = QMessageBox::warning(this, tr("警告"),
                                   tr("是否立即重新计米?"),
                                   QMessageBox::Ok | QMessageBox::Cancel);
        if (ret == QMessageBox::Ok){
            sysPara->devOp->clearProductCnt(3 | 0x10);// [3]总产品计数器清零FPGA
            sysPara->para.totalProductCnt = 0;
        }

    }



}

void MainWindow::on_bottonEditText_pressed()
{
    //qDebug()<<"EditMode"<<sysPara->para.EditMode;
    if(sysPara->para.EditMode==TXTFILE){
        bool MaxCol4000;
        if(sysPara->status.flagOfNo67FPGA)
            MaxCol4000 = true;
        else
            MaxCol4000 = false;
        ui->stackedWidgetText->setCurrentWidget(ui->pageTextEdit);
        ui->stackedWidgetOption->setCurrentWidget(ui->textEditOption);
        ontextEdittextChanged();			//显示大小
        int coldot = (int)ui->textEdit->document()->size().width();
        if(coldot > (MaxCol4000?MAX_PRINT_COL_NUM_Normal:MAX_PRINT_COL_NUM_Wide))
        {
            coldot = MaxCol4000?MAX_PRINT_COL_NUM_Normal:MAX_PRINT_COL_NUM_Wide;
            QMessageBox::warning(this, tr("警告"),
                                 tr("最多支持的列数目为:%1请减小信息长度.").arg((MaxCol4000?MAX_PRINT_COL_NUM_Normal:MAX_PRINT_COL_NUM_Wide)));
        }
    }
    else if(sysPara->para.EditMode==PICFILE){
        emit openCurrFile(sysPara->para.lastOpenedFileName);
    }
    else if(sysPara->para.EditMode==SCENE){
        //qDebug()<<"SCENE";
        //emit openCurrFile(sysPara->para.lastOpenedFileName);
        ui->stackedWidgetText->setCurrentWidget(ui->fileSceneViewer);
        ui->stackedWidgetOption->setCurrentWidget(ui->senceEditOption);
    }

}

void MainWindow::on_pushButtonReduceTextDisplay_pressed()
{
    ui->widgetPrintTextDisplay->reduceDisplay();
}

void MainWindow::on_pushButtonEnlargeTextDisplay_pressed()
{

    ui->widgetPrintTextDisplay->enlargeDisplay();
    //update();
}

/*
 * 	value以100ms为单位
 * */
void MainWindow::onReclainTankPositionChanged(int value){
    static bool init = false;
    static int totalCharNum = 0;
    if(!init){
        int w = ui->labelReclaimStatus->geometry().width() - 1;		//预留几个像素
        QFontMetrics fontMetrics = QApplication::fontMetrics();
        w -= fontMetrics.width(QString(" |>|"));
        int t = fontMetrics.width(QChar('-'));
        if(fontMetrics.width(QChar('-')) != fontMetrics.width(QChar(' '))){
            LogInfo::setRunStatusText(tr("警告:‘-’和空格的宽度不一样"));		//可能有的字体两者宽度不同
        }
        totalCharNum = t?w/t:w;								//t永远都不应该为零，保险起见
        init = true;
    }
    if(sysPara){
        int reclaimTime = sysPara->para.reclaimTankTime?sysPara->para.reclaimTankTime:15;
        int charNum = value*totalCharNum/(reclaimTime*10);

        charNum = (charNum > totalCharNum)?totalCharNum:charNum;
        QString str = " |";
        for(int i = 0; i <= totalCharNum; i++) {		//多加”>|“
            if(i < charNum)
                str.append(QChar('-'));
            else if(i == charNum)
                str.append(QChar('>'));
            else
                str.append(QChar(' '));
        }
        str.append(QChar('|'));
        ui->labelReclaimStatus->setText(str);
    }
}


void MainWindow::setRunStatus(QString str){
    switch(sysPara->devOp->color_flag){
    case 1:
        ui->labelRunStatus->setStyleSheet("color:yellow");
        break;
    case 2:
        ui->labelRunStatus->setStyleSheet("color:red");
        break;
    default:
        ui->labelRunStatus->setStyleSheet("color:black");
        break;
    }
    ui->labelRunStatus->setText(str);
}


void MainWindow::changeTxtMode(QString str){
    if(sysPara){
        fileChange=true;
        sysPara->status.FileChangeRestCntFlag = true;
        emit openFileChange();
        unsigned char SpecialVarEnable = 0;
        sysPara->devOp->fpgaWr(0xa4b0,(unsigned char *)&SpecialVarEnable,1);
    }
}

void MainWindow::update_scroll()
{
    ui->widgetPrintTextDisplay->scroll_update();
}

void MainWindow::changeEditMode(int editMode)
{
    if(sysPara){
        //qDebug()<<"changeEditMode"<<sysPara->para.EditMode;
        if(sysPara->para.EditMode==PICFILE){
            ui->stackedWidgetText->setCurrentWidget(ui->pagePrintTextDisplay);
            ui->stackedWidgetOption->setCurrentWidget(ui->pageOption);
            ui->widgetPrintTextDisplay->update();
            ui->pushButtonTXTOpen->show();
            ui->textEditOption->editMode=sysPara->para.EditMode;
        }
        else if(sysPara->para.EditMode==TXTFILE)
        {
            //            ui->stackedWidgetText->setCurrentWidget(ui->pageTextEdit);
            //            ui->stackedWidgetOption->setCurrentWidget(ui->textEditOption);
            sysPara->para.EditMode=TXTFILE;
            ui->stackedWidgetText->setCurrentWidget(ui->pageTextEdit);
            ui->stackedWidgetOption->setCurrentWidget(ui->textEditOption);
            ui->widgetPrintTextDisplay->update();
            ui->pushButtonTXTOpen->hide();
            ui->textEditOption->editMode=sysPara->para.EditMode;
            ui->textEditOption->editItemModeDone();
        }
        else if(sysPara->para.EditMode==SCENE)
        {
            //qDebug()<<"CCCCCENE";
            sysPara->para.EditMode=SCENE;
            ui->stackedWidgetText->setCurrentWidget(ui->fileSceneViewer);
            ui->stackedWidgetOption->setCurrentWidget(ui->senceEditOption);
            ui->widgetPrintTextDisplay->update();
            ui->pushButtonTXTOpen->hide();
            ui->textEditOption->editMode=sysPara->para.EditMode;
            //edit@12-12
            ui->senceEditOption->show_scene_new_dlg();
        }
        //ontextEdittextChanged();			//显示大小 20140831
        if(sysPara->para.EditMode==SCENE)
        {
            onSwitchTimerShowItem(true);
        }
        else
        {
            onSwitchTimerShowItem(false);
        }
    }
}

TextEditOption* MainWindow::getTexteditOption()
{
    return ui->textEditOption;
}

void MainWindow::SetEditMode(int mode)
{
    ui->textEditOption->editMode = sysPara->para.EditMode;
    //    if(sysPara->para.EditMode==SCENE)
    //    {
    //        timerShowItem->start(10);
    //    }
}

void MainWindow::setRunStatus(QPixmap pixMap){
    ui->labelRunStatus->setPixmap(pixMap);
}
void MainWindow::SetMainTabEdit(int n){

}

void MainWindow::testPrint(){
    //on_pushButtonStartPrint_pressed();
}


void MainWindow::onEditBarCode(){
#ifdef _2DCODE_
    if(sysPara)  {
        dlgqrcode->move( 0,10);
        barcode->setWindowTitle(tr("条形码信息编辑"));
        //qDebug()<<"bcOption->height"<<sysPara->para.bcOption.height;
        barcode->SetOption((bcOption_t*)&sysPara->para.bcOption);
        barcode->show();
        //barcode->GetOption((bcOption_t*)&sysPara->para.bcOption);
    }
#endif

}
void MainWindow::onBarCodeClose(){
#ifdef _2DCODE_
    barcode->GetOption((bcOption_t*)&sysPara->para.bcOption);
    unsigned char *dat;
    bool MaxCol4000;
    if(sysPara->status.flagOfNo67FPGA)
        MaxCol4000 = true;
    else
        MaxCol4000 = false;
    if(MaxCol4000){
        dat =sysPara->status.printDat_Normal;
    }else{
        dat =sysPara->status.printDat;
    }
    if(barcode->flagCount)
    {
        barcode->getDat(dat,0);
        barcode->flagCount=0;
        ui->widgetPrintTextDisplay->update();
    }
    if(barcode->flagInsert )
    {
        barcode->flagInsert=0;
        if(sysPara->para.EditMode==PICFILE)
        {

        }
        else
        {
            //ui->textEditOption->InsertBarCodeToEdit(barcode->pictureName,barcode->imgBar.width(),barcode->imgBar.height());
            QString html = "<img src='" + barcode->pictureName + "'/>";
            QTextCharFormat fmt = ui->textEditOption->textEdit->currentCharFormat ();
            ui->textEditOption->textEdit->insertHtml (html);
            ui->textEditOption->textEdit->mergeCurrentCharFormat(fmt);
            ui->stackedWidgetText->setCurrentWidget(ui->pageTextEdit);
            ui->stackedWidgetOption->setCurrentWidget(ui->textEditOption);
        }
    }
    sysPara->saveParaToFile();
#endif
}

void MainWindow::onEditQRCode(){
#ifdef _2DCODE_
    if(sysPara)  {
        dlgqrcode->SetOption((qrOption_t*)&sysPara->para.qrOption);
        dlgqrcode->move( (this->width() -  dlgqrcode->width())/2 ,10);
        dlgqrcode->setWindowTitle(tr("二维码信息编辑"));

        dlgqrcode->setCntCheckBoxHide(1);

        dlgqrcode->show();
    }
#endif
}
void MainWindow::onInitQRCode(){
#ifdef _2DCODE_
    if(sysPara)  {
        dlgqrcode->SetOption((qrOption_t*)&sysPara->para.qrOption);
        dlgqrcode->move( (this->width() -  dlgqrcode->width())/2 ,10);
        dlgqrcode->setWindowTitle(tr("二维码信息编辑"));
        //dlgqrcode->show();
    }
#endif
}
void MainWindow::onQRCodeClose(){
#ifdef _2DCODE_
    //    dlgqrcode->GetOption((qrOption_t*)&sysPara->para.qrOption);
    if(dlgqrcode->flagInsert ) {
        dlgqrcode->GetOption((qrOption_t*)&sysPara->para.qrOption);
        dlgqrcode->flagInsert=0;
        if(sysPara->para.EditMode==PICFILE){
            return;
        }
        //   qDebug()<<"flagInsert2"<<dlgqrcode->flagInsert<<dlgqrcode->bcWidth<<dlgqrcode->bcHeight;
        ui->textEditOption->InsertBarCodeToEdit(dlgqrcode->pictureName,dlgqrcode->bcWidth,dlgqrcode->bcHeight);
        ui->stackedWidgetText->setCurrentWidget(ui->pageTextEdit);
        ui->stackedWidgetOption->setCurrentWidget(ui->textEditOption);

    }
    if( sysPara->para.qrOption.barCodeFlag != dlgqrcode->barCodeFlag)
    {
        sysPara->para.qrOption.barCodeFlag = dlgqrcode->barCodeFlag;
        ui->textEditOption->textEdit->setHtml(QApplication::translate("MainWindow", "<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0//EN\" \"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
                                                                                    "<html><head><meta name=\"qrichtext\" content=\"1\" /><style type=\"text/css\">\n"
                                                                                    "p, li { white-space: pre-wrap; }\n"
                                                                                    "</style></head><body style=\" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;\">\n"
                                                                                    "<p style=\"-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'wenquanyi'; font-size:10pt;\"><br /></p></body></html>", 0));
    }
    sysPara->saveParaToFile();
#endif
}

void MainWindow::onGenerateQRCode(QString strData)
{
    dlgqrcode->extSetText(strData);
    dlgqrcode->GetOption((qrOption_t *)&sysPara->para.qrOption);
}

void MainWindow::onShowAndHideItem()
{
    /////////特殊条件
    //while(1)
    {
        static bool startFlag= false, lastStarFlag = false;

        QList<QGraphicsItem *> items = pPicScene->items();
        foreach (QGraphicsItem *item, items)
        {
            PicTextItem *picText = qgraphicsitem_cast<PicTextItem*>(item);
            if(picText->SpecialConditions)
            {
                //setRunStatus(tr("六个内容(%1,%2)").arg(picText->CatchCnt1CurrValue).arg(QString::number(sysPara->status.calandar_and_dat.cnt1CurrValue,16).toInt()));
                if(picText->CatchCnt1StartValue <= QString::number(sysPara->status.calandar_and_dat.cnt1CurrValue,16).toInt() &&
                        QString::number(sysPara->status.calandar_and_dat.cnt1CurrValue,16).toInt() <= picText->CatchCnt1CurrValue)
                {
                    picText->show();
                    startFlag = true;
                }
                else
                {
                    picText->hide();
                    startFlag = false;
                }
                if(startFlag != lastStarFlag)
                {
                    lastStarFlag = startFlag;
                    //on_pushButtonStartPrint_pressed();
                    if(sysPara->para.EditMode == TXTFILE||sysPara->para.EditMode== PICFILE)
                        PreviewPressed();		//生成打印数据，确定变量的位置和对应生成字模
                    else if(sysPara->para.EditMode == SCENE)
                        onPreviewScene();
                    //                     unsigned char blankDat[BLANK_COL_NUM*MAX_PRINT_ROW_BYTE_NUM];
                    //                     memset(blankDat,0,sizeof(blankDat));
                    //                     sysPara->devOp->fpgaWr(0,blankDat,sizeof(blankDat));//...所加的空白偏移地址
                    //                     sysPara->devOp->fpgaWr(sizeof(blankDat),sysPara->status.printDat,sizeof(sysPara->status.printDat)-sizeof(blankDat));
                }
            }
        }
        //QApplication::processEvents();
    }
    //////////////
}

void MainWindow::onSwitchTimerShowItem(bool flag)
{
    if(flag)
    {
        // timerShowItem->start(10);
    }
    else
    {
        timerShowItem->stop();
        unsigned char SpecialVarEnable = 0;
        sysPara->devOp->fpgaWr(0xa4b0,(unsigned char *)&SpecialVarEnable,1);
    }
}

void MainWindow::JSON_UpdateDATA(){

    QLabel *labelFontSize = ui->textEditOption->getLabelFontSize();
    bool ok;
    int font_size = labelFontSize->text().toInt(&ok,10);
    QString font_family = Public::getFontFamily(font_size);
    static int save_uniCode = 33; //数据码固定33位
    ui->textEditOption->textEdit->clear();//宴令需要屏蔽

    QString strContentPrint(sysPara->Get_JSON_DATA.PrintingContent);
    strContentPrint.replace(' ',"&nbsp;");
    QString strContent =  sysPara->Get_JSON_DATA.QRCodeContent;
    int left_int =  strContent.indexOf("https://dwz.cn/");
    if(left_int == 0)
    {
        strContent = strContent.mid(8, strContent.size());
        strContent = "www." + strContent;
    }
    if(sysPara->para.isRemoveCode)
    {
        QSize size(2,5);
        QImage image(size,QImage::Format_ARGB32);
        image.fill(0x00ffffff);//填充白色
        //image.fill(0x00f0f000);//填充白色
        //        QPainter painter(&image);
        //        //image.save("./printImage.jpg");
        //        ui->textEdit->document()->drawContents (&painter, image.rect());		/*将text写到pic*/
        image.save("/home/plg/doc/modbusQR.bmp");
    }
    else
    {
        if(dlgqrcode->barCodeFlag == 1)
        {
            barcode->extSetText(QString::fromUtf8(strContent.toStdString().c_str()));
            barcode->GetOption((bcOption_t*)&sysPara->para.bcOption);
        }
        else
        {
            dlgqrcode->extSetText(QString::fromUtf8(strContent.toStdString().c_str()), true);
            dlgqrcode->GetOption((qrOption_t *)&sysPara->para.qrOption);
        }
    }
    QString save_text = ui->textEditOption->textEdit->toHtml();

    if(save_text.contains("<img src=\"/home/plg/doc/modbusQR.bmp\" />", Qt::CaseSensitive)){
        int left_int =  save_text.indexOf("<img src=\"/home/plg/doc/modbusQR.bmp\" />");
        QString str_html = save_text.left(left_int);    //get the QRcode pic left html
        QString right_str_html = save_text.mid(left_int, save_text.size());

        if(!sysPara->para.isRemoveDigitCode)
        {
            str_html += "<img src=\"/home/plg/doc/modbusQR.bmp\" />";
            left_int =  right_str_html.indexOf(";\">") + 1;
            int index_size = QString(";\">").size();
            QString right_html = right_str_html.mid(left_int+index_size+save_uniCode, right_str_html.size());
            save_uniCode = QString::fromUtf8(sysPara->Get_JSON_DATA.ProductUniqueCode).size();
            //        qDebug()<<"right_html="<<right_html;

            QString txt_fomart = QString::fromUtf8("<span style=\" font-family:'%1'; font-size:%2pt;font-weight:%3;\">&nbsp;").arg(font_family)
                    .arg(font_size).arg(ui->textEditOption->getCheckBoxBold()->isChecked()? 600:400);
            txt_fomart += QString::fromUtf8(sysPara->Get_JSON_DATA.ProductUniqueCode);

            if(!right_html.startsWith("<")){     //situation: "$ProductUniqueCodexxxx</span>"
                QString crash_word =  right_html.left(right_html.indexOf("<"));
                txt_fomart += crash_word;
                //            qDebug()<<"crash_word="<<crash_word;
            }
            txt_fomart += "</span>";
            str_html += txt_fomart;

            left_int =  right_html.indexOf("</span>");
            index_size = QString("</span>").size();
            QString final_str = right_html.mid(left_int +index_size, right_html.size());

            str_html += final_str;
        }
        else
        {
            str_html += right_str_html;
        }
        //        QMessageBox::StandardButton ret;
        //        ret = QMessageBox::question(this, tr("提示"),tr("是否接收新的信息!"), QMessageBox::Ok | QMessageBox::Cancel);
        //        if (ret == QMessageBox::Ok)
        {
            ui->textEditOption->textEdit->setHtml(str_html);
            ui->textEditOption->textEdit->moveCursor(QTextCursor::EndOfLine);
        }
    }else{
        QString txt_fomart = "";
        txt_fomart = QString::fromUtf8("<span style=\" font-family:'%1'; font-size:%2pt;font-weight:%3;\">").arg(font_family).arg(font_size)
                .arg(ui->textEditOption->getCheckBoxBold()->isChecked()? 600:400);
        txt_fomart += strContentPrint.toUtf8();
        txt_fomart += "</span>";
        txt_fomart += "<img src=\"/home/plg/doc/modbusQR.bmp\" />";

        if(!sysPara->para.isRemoveDigitCode)
        {
            txt_fomart += QString::fromUtf8("<span style=\" font-family:'%1'; font-size:%2pt;font-weight:%3;\">&nbsp;").arg(font_family).arg(font_size)
                    .arg(ui->textEditOption->getCheckBoxBold()->isChecked()? 600:400);
            txt_fomart += QString::fromUtf8(sysPara->Get_JSON_DATA.ProductUniqueCode);
            save_uniCode = QString::fromUtf8(sysPara->Get_JSON_DATA.ProductUniqueCode).size();
            txt_fomart += "</span>";
        }
        else
        {
            txt_fomart += QString::fromUtf8("<span style=\" font-family:'%1'; font-size:%2pt;font-weight:%3;\">&nbsp;</span>").arg(font_family).arg(font_size);
        }
        //        QMessageBox::StandardButton ret;
        //        ret = QMessageBox::question(this, tr("提示"),tr("是否接收新的信息!"), QMessageBox::Ok | QMessageBox::Cancel);
        //        if (ret == QMessageBox::Ok)
        {
            ui->textEditOption->textEdit->insertHtml(txt_fomart);
        }
        //        QString refresh_text = ui->textEditOption->textEdit->toHtml();
        //        ui->textEditOption->textEdit->setHtml(refresh_text);
        //        ui->textEditOption->textEdit->moveCursor(QTextCursor::EndOfLine);
    }

    if(sysPara->para.EditMode == TXTFILE||sysPara->para.EditMode== PICFILE)
        PreviewPressed();		//生成打印数据，确定变量的位置和对应生成字模
    else if(sysPara->para.EditMode == SCENE)
        onPreviewScene();
    //on_pushButtonStartPrint_pressed();

    ui->label_24->setFocus();   //prevent keyboard pop up
}

QStringList stringListRecive;

// mdOpenFile(QString("/home/plg/doc/%1").arg(fileName));
void MainWindow::modbusUpdateQRCode(){
    //    QString temp = QString();
    sysPara->modbusStatus.printFinishFlag = 0;//置打印标志
    sysPara->status.printDoneFlag = false;
    static QString lastReceiveContent = "";
    char temp[120] = {0};
    int i,j = 0;
    for(i=0; i<110; i+=2)
    {
        //if(sysPara->modbusParas.QRcode_buf[i] == 0) break;
        temp[j] = sysPara->modbusParas.QRcode_buf[i];
        j++;
    }
    if(strlen(&temp[1]) == 0)
    {
        LogInfo::setRunStatusText(tr("获取DM码内容为空!"));
        return;
    }

    if(sysPara->para.EditMode == TXTFILE)
    {
        QString receiveContent = QString::fromUtf8(&temp[1]);
        dlgqrcode->extSetText(receiveContent);
        LogInfo::setRunStatusText(tr("获取DM码内容:"));
        LogInfo::setRunStatusText(tr("receiveContent").arg(receiveContent));

        //    dlgqrcode->extSetText("asbasb");
        dlgqrcode->GetOption((qrOption_t *)&sysPara->para.qrOption);

        //    ui->textEditOption->modbus_insert_pic("/home/plg/doc/QR_aa.bmp");
        ui->textEditOption->textEdit->clear();//插入之前先清空
        //ui->textEditOption->modbus_insert_pic("/home/plg/doc/modbusQR.bmp");
        QString html = "<img src=\"/home/plg/doc/modbusQR.bmp\" />";
        ui->textEditOption->textEdit->setHtml(html);
        ui->textEditOption->textEdit->moveCursor(QTextCursor::EndOfLine);
        //sysPara->modbusStatus.printFinishFlag = 0;//置打印标志
        if(receiveContent == lastReceiveContent)
        {
            LogInfo::setRunStatusText(tr("获取DM码内容跟上次相同"));
            //sysPara->modbusStatus.printFinishFlag = 1;//置打印标志
            MySleep(200);
            sysPara->status.printDoneFlag = true;
            return;
        }
        lastReceiveContent = receiveContent;
        sysPara->status.oneCodePrintOnce = true;
        on_pushButtonStartPrint_pressed();//开始打印
    }
    else if(sysPara->para.EditMode == SCENE)
    {
        QString receiveContent = QString::fromUtf8(&temp[1]);
        LogInfo::setRunStatusText(tr("获取DM码内容:"));
        LogInfo::setRunStatusText(tr("receiveContent").arg(receiveContent));
        if(receiveContent == lastReceiveContent)
        {
            LogInfo::setRunStatusText(tr("获取DM码内容跟上次相同"));
            MySleep(200);
            sysPara->status.printDoneFlag = true;
            return;
        }
        lastReceiveContent = receiveContent;

        stringListRecive =  receiveContent.split(";");

        QString lastopenedFileName = sysPara->para.lastOpenedFileName;
        lastopenedFileName = QFileInfo(lastopenedFileName).baseName();
        int left_int = lastopenedFileName.indexOf('@');
        if(left_int == 0)
        {
            sysPara->status.forTemplateUse = true;
            emit scenefileOpen(sysPara->para.lastOpenedFileName,false);//sceneeditoption 接收这个信号然后打开文件
            //emit fileNameChanged(QFileInfo(filePath).fileName());
            sysPara->status.forTemplateUse = false;
            sysPara->status.oneCodePrintOnce = true;
            on_pushButtonStartPrint_pressed();//开始打印
        }
    }


}

void MainWindow::onUpdateDispQRCode(int type){
#ifdef _2DCODE_
    int varNum;

    qDebug()<<"onUpdateDispQRCode";
    //QRcode string test
    //    static int cc = 0;
    for(varNum=0;varNum<sysPara->status.QRvariNum;varNum++){
        if(sysPara->print.QRvars[varNum].type<2)
        {
            sysPara->print.QRvars[varNum].Counter = sysPara->para.qrOption.counter;
            sysPara->print.QRvars[varNum].cntNum = sysPara->para.qrOption.cntNum;

            dlgqrcode->TextToQRImg((qrOption_t *)&sysPara->para.qrOption);
            dlgqrcode->getDat(sysPara,varNum);
        }else if(sysPara->print.QRvars[varNum].type==2)
        {
            QString txt,txt2,txt3,txt4,txtVar1,txtVar2;
            //char fmt[]="%08d%04d";
            txt2=sysPara->para.bcOption.TxtModule;
            txt3=sysPara->para.bcOption.TxtLine;
            txt4=sysPara->para.bcOption.TxtLine1;
            sysPara->para.bcOption.var1Type =1;
            sysPara->para.bcOption.var2Type =2;
            txtVar1=barcode->getVarTxt(sysPara->para.bcOption.var1En,sysPara->para.bcOption.var1Type);
            txtVar2=barcode->getVarTxt(sysPara->para.bcOption.var2En,sysPara->para.bcOption.var2Type);
            //txt.sprintf(fmt,sysPara->status.calandar_and_dat.cnt1CurrValue,sysPara->status.calandar_and_dat.cnt2CurrValue);
            txt = txt2.trimmed()+txtVar1+txt3.trimmed()+txtVar2+txt4.trimmed();
            barcode->TextToBCImg((bcOption_t *)&sysPara->para.bcOption,txt);    //
            barcode->getDat2(sysPara,varNum);
            //qDebug()<<"update BAR"<<sysPara->status.calandar_and_dat.cnt1CurrValue<<sysPara->status.calandar_and_dat.cnt2CurrValue;
            //qDebug()<<txt;
        }

        sysPara->print.QRvars[varNum].startRowPos = sysPara->print.QRvars[varNum].endRowPos-sysPara->print.QRvars[varNum].height;
        if(sysPara->status.currPrintCol < (sysPara->print.QRvars[varNum].startColPos+sysPara->print.QRvars[varNum].width)) {
            sysPara->status.currPrintCol = sysPara->print.QRvars[varNum].startColPos+sysPara->print.QRvars[varNum].width;
        }
        if (sysPara->status.currPrintRow<sysPara->print.QRvars[varNum].endRowPos) {
            sysPara->status.currPrintRow = sysPara->print.QRvars[varNum].endRowPos;
        }
        //sysPara->status.currPrintCol = (sysPara->status.currPrintCol<sysPara->print.QRvars[varNum].startColPos+sysPara->print.QRvars[varNum].width)?
        //            sysPara->print.QRvars[varNum].startColPos+sysPara->print.QRvars[varNum].width:sysPara->status.currPrintCol;
        //sysPara->status.currPrintRow = (sysPara->status.currPrintRow<sysPara->print.QRvars[varNum].endRowPos)?sysPara->print.QRvars[varNum].endRowPos:sysPara->status.currPrintRow;

        //        qDebug()<<"onUpdate:"<< sysPara->print.QRvars[varNum].startColPos
        //               <<sysPara->print.QRvars[varNum].endRowPos              <<sysPara->print.QRvars[varNum].width
        //                  <<sysPara->print.QRvars[varNum].height                 <<sysPara->print.QRvars[varNum].type;
    }

    if(type)
    {

        sysPara->para.qrOption.DisplayUpdate=1;
        //  ui->widgetPrintTextDisplay->updateSysStatusToUI();
        if(sysPara->status.addSpace)
            ui->widgetPrintTextDisplay->setDisplaySize(sysPara->status.currPrintCol/2,sysPara->status.currPrintRow);
        else ui->widgetPrintTextDisplay->setDisplaySize(sysPara->status.currPrintCol,sysPara->status.currPrintRow);
        ui->stackedWidgetText->setCurrentWidget(ui->pagePrintTextDisplay);
        ui->stackedWidgetOption->setCurrentWidget(ui->pageOption);
        ui->labelTextWidthHeight->setText(tr("[ %1行 x %2列 ]").arg(sysPara->status.currPrintRow ).arg(sysPara->status.currPrintCol));
        ui->widgetPrintTextDisplay->update();
        //qDebug()<<"update BAR ??";
    }
#endif
}

int MainWindow::searchExpiryVar(QString html)
{
    int varNum = 0;
    if( sysPara->status.ExpiryVarNum || sysPara->status.CurrDateVariNum || sysPara->status.classVariNum)
    {
        QString pattern = "<img src=\":/(\\d*)/(\\d*)/../image/(\\w*).bmp\" width=\"(\\d*)\" height=\"(\\d*)\" />";
        // 1 type ,2 name,3 width,4 height
        //<img src=":/80/image/expiryDate8.bmp" width="16" height="16" /></p><
        //<img src=":/81/image/curDate8.bmp" width="25" height="21" />
        QRegExp rx(pattern);
        QString textHtml = html==""? ui->textEdit->toHtml() : html;
//        qDebug() << "searchExpiryVar:"<< textHtml;
        int from = 0;
        // int xx =textHtml.size();
        sysPara->print.ExpiryVar.type = 0;
        sysPara->print.CurDateVar.type = 0;
        //sysPara->print.CurDateVar[1].type = 0;
        sysPara->print.ClassVari.type = 0;
        while(from < textHtml.size() && from != -1){
            from = textHtml.indexOf(rx,from);
            bool ok;
            if(from != -1)
            {
                from ++;
                if(varNum < 3)
                {
                    QString s = rx.cap(3);
                    int type = rx.cap(1).toInt(&ok);
                    // 填充信息
                    //qDebug()<<"QVARName:"<<type<<rx.cap(1)<<rx.cap(2)<<rx.cap(3)<<rx.cap(4);
                    if(type==EXPIRYDATE || type==EXPIRYDATE + 10 || type==EXPIRYDATE + 20 || type==EXPIRYDATE + 30)
                    {    //expiryDate
                        //qDebug()<<"ExpiryVar:"<<type<<rx.cap(1)<<rx.cap(2).left(10)<<rx.cap(2)<<rx.cap(3)<<rx.cap(4);
                        sysPara->print.ExpiryVar.type = type;
                        sysPara->print.ExpiryVar.width =  rx.cap(4).toInt(&ok);// *(sysPara->status.addSpace && type==9 ?2:1) ;
                        sysPara->print.ExpiryVar.height = rx.cap(5).toInt(&ok);
                        //sysPara->print.ExpiryVar.startRowPos = sysPara->print.ExpiryVar.endRowPos-sysPara->print.ExpiryVar.height;
                        sysPara->print.ExpiryVar.startRowPos = sysPara->print.ExpiryVar.endRowPos-(sysPara->print.ExpiryVar.height-1);
                        sysPara->print.ExpiryVar.letterSpace = rx.cap(2).toInt();
                        if(sysPara->print.ExpiryVar.startRowPos < 0)
                        {
                            sysPara->print.ExpiryVar.startRowPos = 0;
                        }
                        if(rx.cap(3).contains("75"))
                        {
                            sysPara->print.ExpiryVar.bold = 1;
                        }
                        else
                        {
                            sysPara->print.ExpiryVar.bold = 0;
                        }
                        // 直接更新有效期，并退出?
                        ExpiryDotUpdate(1);
                        varNum++;
                    }
                    else if(type == CURDATE || type==CURDATE + 10 || type==CURDATE + 20 || type==CURDATE + 30)
                    {
                        sysPara->print.CurDateVar.type = type;
                        sysPara->print.CurDateVar.width =  rx.cap(4).toInt(&ok);// *(sysPara->status.addSpace && type==9 ?2:1) ;
                        sysPara->print.CurDateVar.height = rx.cap(5).toInt(&ok);
                        sysPara->print.CurDateVar.startRowPos = sysPara->print.CurDateVar.endRowPos-(sysPara->print.CurDateVar.height-1);
                        sysPara->print.CurDateVar.letterSpace = rx.cap(2).toInt();
                        if(sysPara->print.CurDateVar.startRowPos < 0)
                        {
                            sysPara->print.CurDateVar.startRowPos = 0;
                        }
                        if(rx.cap(3).contains("875"))
                        {
                            //qDebug()<<"bold";
                            sysPara->print.CurDateVar.bold = 1;
                        }
                        else
                        {
                            //qDebug()<<"normal";
                            sysPara->print.CurDateVar.bold = 0;
                        }
                        //sysPara->print.CurDateVar.startRowPos = sysPara->print.CurDateVar.endRowPos-(sysPara->print.CurDateVar.height-1);
                        //qDebug()<<"CurDateVar:startRowPos"<<sysPara->print.CurDateVar.startRowPos<<" height"<<sysPara->print.CurDateVar.height;
                        // 生产日期即当前日期
                        ExpiryDotUpdate(2);
                        varNum++;
                    }
                    else if(type == CURCLASS)
                    {
                        //qDebug()<<"CURCLASS:"<<type<<rx.cap(1)<<rx.cap(2).contains("875")<<rx.cap(2)<<rx.cap(3)<<rx.cap(4);
                        EXPIRYVAR_t *currClass = &sysPara->print.ClassVari ;
                        currClass->type = type;
                        currClass->width =  rx.cap(4).toInt(&ok);// *(sysPara->status.addSpace && type==9 ?2:1) ;
                        currClass->height = rx.cap(5).toInt(&ok);
                        currClass->startRowPos = currClass->endRowPos-currClass->height-1;
                        currClass->letterSpace = rx.cap(2).toInt();
                        if(rx.cap(3).contains("875")) {
                            //qDebug()<<"bold";
                            currClass->bold = 1;
                        }
                        else {
                            //qDebug()<<"normal";
                            currClass->bold = 0;
                        }

                        //sysPara->print.CurDateVar.startRowPos = sysPara->print.CurDateVar.endRowPos-(sysPara->print.CurDateVar.height-1);
                        //qDebug()<<"CurDateVar:startRowPos"<<sysPara->print.CurDateVar.startRowPos<<" height"<<sysPara->print.CurDateVar.height;
                        // 生产日期即当前日期
                        ExpiryDotUpdate(3);
                        varNum++;
                    }
                }
                else if(varNum>=3) break;
            }
            //break;
            //if(varNum>sysPara->status.ExpiryVarNum)break;
        }
    }
    return varNum;
}
void MainWindow::ExpiryDotUpdate(char Mode)
{  //更新有效期    
    QTextEdit textEdit;
    //textEdit.document()->setDocumentMargin(0);
    textEdit.setLineWrapMode(QTextEdit::NoWrap);
    int height,width;
    //QDate curDate=QDate::currentDate();
    EXPIRYVAR_t *p_var;//=(Mode==1)?&sysPara->print.ExpiryVar:&sysPara->print.CurDateVar;

    if(sysPara->status.flagOfAdjustWidth_1){
        sysPara->print.ExpiryVar.splitMode = sysPara->status.splitMode_Adjust_1;
        sysPara->status.flagOfAdjustWidth_1 = false;
    }
    if(sysPara->status.flagOfAdjustWidth_2){
        sysPara->print.CurDateVar.splitMode = sysPara->status.splitMode_Adjust_2;
        sysPara->status.flagOfAdjustWidth_2 = false;
    }
    if(Mode==1)
    {
        qDebug()<<"Mode==1";
        if(sysPara->status.ExpiryVarNum == 0) {
            return;
        }
        p_var = &sysPara->print.ExpiryVar;
        QDate expiryDate=QDate::currentDate().addDays(sysPara->para.ExpiryDay);
        sysPara->print.ExpiryVar.year  = expiryDate.year();
        sysPara->print.ExpiryVar.month = expiryDate.month();
        sysPara->print.ExpiryVar.day   = expiryDate.day();
        r_ExpiryDay = sysPara->para.ExpiryDay;
    }
    else if(Mode==2)
    {
        p_var = &sysPara->print.CurDateVar;
        if(sysPara->status.CurrDateVariNum == 0) {
            return;
        }
    }
    else if(Mode==3)
    {
        p_var = &sysPara->print.ClassVari;
        qDebug()<<"Mode==3";
        if(sysPara->status.classVariNum == 0) {
            return;
        }
    }
    else
        return;
    {
        textEdit.clear();
        height = p_var->height;
        width = p_var->width;
        QString str;
        QHash<int, QString> dateFormat;
        dateFormat.insert(0,"yyyy-MM-dd");
        dateFormat.insert(1,"yyyy/MM/dd");
        dateFormat.insert(2,"yyyyMMdd");
        dateFormat.insert(3,"yyyy年MM月dd日");
        dateFormat.insert(4,"yyyy-MM-dd hh:mm");
        dateFormat.insert(5,"yyyy/MM/dd hh:mm");
        dateFormat.insert(6,"yyyyMMddhhmm");
        dateFormat.insert(7,"yyyy年MM月dd日 hh:mm");
        dateFormat.insert(8,"hh:mm");
        dateFormat.insert(9,"ddhhmm");
        dateFormat.insert(10,"dd MM yy");
        dateFormat.insert(11,"dd/MM/yy");
        dateFormat.insert(12,"dd/MM/yyyy");
        dateFormat.insert(13,"dd-MM-yy");
        dateFormat.insert(14,"dd-MM-yyyy");

        /*****轮班变量功能 start******/
        /*00:00-08:00
          08:00-16:00
          16:00-00:00
        */
        QTime current_time =QTime::currentTime();
        int hour = current_time.hour();
        QString DateTime;
        if(Mode==1) {
            DateTime = QDateTime::currentDateTime().addDays(sysPara->para.ExpiryDay).toString(dateFormat.value(sysPara->print.ExpiryVar.splitMode));
        }
        else if(Mode==2 ) {
            DateTime = QDateTime::currentDateTime().toString(dateFormat.value(p_var->splitMode));
        }
        else if (Mode == 3) {
            if(hour >= 0 && hour <8)
            {
                dateFormat.insert(15,"A");
                DateTime = "A";
            }
            else if(hour >= 8 && hour < 16)
            {
                dateFormat.insert(15,"B");
                DateTime = "B";
            }
            else if(hour >= 16)
            {
                dateFormat.insert(15,"C");
                DateTime = "C";
            }
        }

        /*****轮班变量功能 end******/
        int DPI = textEdit.logicalDpiX();
        DPI = DPI?DPI:1;	//Pixel = DPI * Point / 72
        if(p_var->bold) {
            textEdit.insertHtml(QString("<span style=\" font-family:'%1'; font-size:%2pt;  font-weight:%3;\">%4</span>")
                                .arg(Public::getFontFamily(height-1,p_var->type))  // 20160812 增加横向字体 p_var->type <9 正常， p_var->type 20～28 左横  p_var->type 40～48 右横
                                .arg(height*72/DPI-1)
                                .arg(600)
                                .arg(DateTime)
                                );	//600表示加粗，400表示普通
        }
        else {
            textEdit.insertHtml(QString("<span style=\" font-family:'%1'; font-size:%2pt;  font-weight:%3;\">%4</span>")
                                .arg(Public::getFontFamily(height,p_var->type))  // 20160812 增加横向字体 p_var->type <9 正常， p_var->type 20～28 左横  p_var->type 40～48 右横
                                .arg(height*72/DPI)
                                .arg(400)
                                .arg(DateTime)
                                //								.arg("x")
                                );	//600表示加粗，400表示普通
        }

        QFont font = textEdit.font();
        font.setLetterSpacing(QFont::AbsoluteSpacing, p_var->letterSpace);
        textEdit.setFont(font);

        int imgHeight = height + 12;
        bool MaxCol4000;
        if(sysPara->status.flagOfNo67FPGA)
            MaxCol4000 = true;
        else
            MaxCol4000 = false;
        if(imgHeight> MAX_PRINT_ROW_NUM+12)
            imgHeight = MAX_PRINT_ROW_NUM+12;
        if(width> (MaxCol4000?MAX_PRINT_COL_NUM_Normal:MAX_PRINT_COL_NUM_Wide))
            width = MaxCol4000?MAX_PRINT_COL_NUM_Normal:MAX_PRINT_COL_NUM_Wide;
        QSize size(width+2,imgHeight);
        QImage image(size,QImage::Format_ARGB32);
        image.fill(0x00ffffff);
        QPainter painter(&image);
        textEdit.show();				//如果不显示，似乎不会绘制
        textEdit.document()->drawContents (&painter, image.rect());		/*将text写到pic*/
        textEdit.hide();
        image.save("./Expiry.bmp");

        int lastValidRow = 0;
        for(int k = imgHeight - 1; k >= 0 ; k--){
            for(int j = 0; j < width+1; j ++){
                QRgb rgb = image.pixel(j,k);
                if(rgb&0xff000000){
                    lastValidRow = k + 1;
                    break;
                }
            }
            if(lastValidRow != 0)
            {
                break;
            }
        }
        int rowDiff = p_var->endRowPos - p_var->startRowPos;
        int firstValidRow=0;
        int firstValidRowDiff;
        if(lastValidRow >= rowDiff)
        {
            firstValidRow = lastValidRow - rowDiff;
            firstValidRowDiff = firstValidRow;
        }
        else
        {
            firstValidRow = 0;
            firstValidRowDiff = lastValidRow > rowDiff;
        }

        firstValidRow = firstValidRow >= 0?firstValidRow:0;			//纠正
        str="";//s2="";
        int wStart=p_var->startColPos;
        int hStart= p_var->startRowPos;
        unsigned char *dat;
        if(MaxCol4000){
            dat =sysPara->status.printDat_Normal;
        }else{
            dat =sysPara->status.printDat;
        }
        for(int j = 2; j < width+1; j ++)
        {
            unsigned char c=0;
            hStart= p_var->startRowPos;
            c=dat[(wStart)*5+(hStart)/8];
            for(int k = firstValidRow; k <= lastValidRow; k++)
            {
                QRgb rgb = image.pixel(j,k);
                if(((rgb >> 24)&0xff) > 0x80)
                {
                    c |= (1 << (hStart%8));
                }
                else
                {
                    c &= ~(1 << (hStart%8));
                }
                if(hStart%8==7) {
                    dat[(wStart)*5+(hStart)/8]=c;
                    c=dat[(wStart)*5+(hStart+1)/8];
                }
                hStart++;
            }
            dat[(wStart)*5+(hStart)/8]=c;
            wStart++;
        }
    }
}

int MainWindow::searchQrVar(){
    int varNum = 0;
    if( sysPara->status.QRvariNum){
        QString pattern = "<img src=\":/(\\d*)/image/(\\w*).bmp\" width=\"(\\d*)\" height=\"(\\d*)\" />";
        // 1 type ,2 name,3 width,4 height
        //<img src=":/9/image/DMTV16.bmp" width="16" height="16" /></p><
        //<img src=":/10/image/QRV21.bmp" width="25" height="21" />
        QRegExp rx(pattern);
        //QString textHtml = ui->textEdit->toHtml();
        /////////////
        QTextEdit textEdit ;
        for(int i=0;i<sysPara->status.QRvariNum;i++)
        {

            if(sysPara->print.QRvars[i].type==0){
                textEdit.insertHtml(QString("<img src=':/%1/image/DMTV%2.bmp'  height='%2' width='%3' />")
                                    .arg(9).arg(sysPara->para.qrOption.height).arg(sysPara->para.qrOption.width));		//插入索引后
            }
            else if(sysPara->print.QRvars[i].type==1){
                textEdit.insertHtml(QString("<img src=':/%1/image/QRV%2.bmp'  height='%2' width='%3' />")
                                    .arg(10).arg(sysPara->para.qrOption.height).arg(sysPara->para.qrOption.width));		//插入索引后
            }
            else if(sysPara->print.QRvars[i].type==2){
                textEdit.insertHtml(QString("<img src=':/%1/image/BARV%2.bmp'  height='%2' width='%3' />")
                                    .arg(11).arg(sysPara->para.qrOption.height).arg(sysPara->para.qrOption.width));		//插入索引后
            }
        }
        QString textHtml = textEdit.toHtml();
        ////////////
        int from = 0;
        // int xx =textHtml.size();
        while(from < textHtml.size() && from != -1){
            from = textHtml.indexOf(rx,from);
            bool ok;
            //qDebug()<<xx<<"from:"<<from;
            if(from != -1){
                from ++;
                if(varNum < 4){
                    QString s = rx.cap(2);
                    int type = rx.cap(1).toInt(&ok);
                    // 填充信息
                    //qDebug()<<"QVARName:"<<type<<rx.cap(1)<<rx.cap(2)<<rx.cap(3)<<rx.cap(4);
                    if(type<20  && type>=9  && (sysPara->print.QRvars[varNum].type ==type-9))
                    {
                        //sysPara->print.QRvars[varNum].type = type-9;
                        sysPara->para.qrOption.type = type-9;
                        sysPara->para.qrOption.width=sysPara->print.QRvars[varNum].width =  rx.cap(3).toInt(&ok);// *(sysPara->status.addSpace && type==9 ?2:1) ;
                        sysPara->para.qrOption.height =sysPara->print.QRvars[varNum].height = rx.cap(4).toInt(&ok);
                        sysPara->print.QRvars[varNum].startRowPos = sysPara->print.QRvars[varNum].endRowPos-sysPara->print.QRvars[varNum].height;

                        //qDebug()<<"type:"<<varNum<<sysPara->print.QRvars[varNum].type<<sysPara->status.QRvariNum
                        //         <<sysPara->print.QRvars[varNum].startColPos<<sysPara->print.QRvars[varNum].startRowPos<<sysPara->print.QRvars[varNum].endRowPos
                        //            <<sysPara->print.QRvars[varNum].width<<sysPara->print.QRvars[varNum].height
                        //          <<rx.cap(1)<<rx.cap(2)<<rx.cap(3)<<rx.cap(4);
                        //type: 0 1 1 0 0 21 25  21 "10" "QRV21" "25" "21"
                        //type: 0 2 1 0 0 12 325 12 "11" "BARV12" "325" "12"
                        varNum++;
                        //break;
                    }

                }
            }
        }
    }
    return varNum;
}

PicScene* MainWindow::getPicScene()
{
    return pPicScene;
}

void MainWindow::on_pushButtonCleanUP_pressed(){

    emit  InkjetCleanUP();

}
void MainWindow::ShowWarnningText1(QString strTitle,QString strWarring){

    dlgMyWarring.SetTitleText(strTitle);
    dlgMyWarring.SetWarringText(strWarring);
    dlgMyWarring.show();
    dlgMyWarringShowDlyCnt =20;

}

void MainWindow::onStatusHighVoltageFault(){
#ifdef X86TEST

#else
    if(!(sysPara->status.statWarn & WARN_STATUS_POWER_MON)) return;
#endif
    strTitle = tr("高压故障，暂停打印.");

    strWarring = tr("高压故障：两高压偏转板间的电压检测异常");strWarring.append("\r\n");
    strWarring.append(tr("1.高压偏转板和高压底座潮湿、脏污，请清洗并吹干高压板和高压底座;"));strWarring.append("\r\n");
    strWarring.append( tr("2.机器更换主板或者高压包，请进入“系统设置”点击“重置高压”，字高设置为90时，重置高压报警值应在480—550之间;"));strWarring.append("\r\n");
    //strWarring.append( tr("字高设置为90时，重置高压报警值应在480—550之间;"));strWarring.append("\r\n");
    strWarring.append( tr("3.高压线路漏电，请更换高压线路;"));strWarring.append("\r\n");
    strWarring.append( tr("4.高压底座漏电，请更换高压底座。"));strWarring.append("\r\n");
    emit ShowWarnningText(strTitle,strWarring);

}
void MainWindow::onStatusInkLeak(){
#ifdef X86TEST

#else
    if(!(sysPara->status.statWarn & WARN_STATUS_SUMP_WARN)) return;
#endif
    strTitle = tr("墨水缸满报警");

    strWarring = tr("墨水过多：墨水溢出");strWarring.append("\r\n");
    strWarring.append(tr("1. 请停止添加墨水;"));strWarring.append("\r\n");
    strWarring.append(tr("2. 请排出多余墨水。"));strWarring.append("\r\n");
    emit ShowWarnningText(strTitle,strWarring);
}

void MainWindow::onStatusInkSwint(){

    if(!(sysPara->status.statWarn & WARN_STATUS_INK_SWINT)) return;

}
void MainWindow::onStatusInkWaterLevel(){
#ifdef X86TEST

#else
    if(!(sysPara->status.statWarn & WARN_STATUS_INK_WARN)) return;
#endif
    strTitle = tr("墨水液位报警");

    strWarring = tr("墨水液位：墨水即将耗尽");strWarring.append("\r\n");
    strWarring.append(tr("1. 墨水耗尽，3小时后将自动关机，请及时添加墨水。"));strWarring.append("\r\n");
    emit ShowWarnningText(strTitle,strWarring);
}
void MainWindow::onStatusRecycleWarn(){
#ifdef X86TEST

#else
    if(!(sysPara->status.statWarn & WARN_STATUS_RECYCLE_FAULT)) return;
#endif
    strTitle = tr("回收故障，关闭回收槽，关墨线");
    strWarring = tr("回收故障：未检测到有墨水回收");strWarring.append("\r\n");
    strWarring.append( tr("1. 墨水未射入回收管，请修正墨线方向;"));strWarring.append("\r\n");
    strWarring.append( tr("2. 墨水粘度太低，请更换新墨水;"));strWarring.append("\r\n");
    strWarring.append( tr("3. 回收管堵塞，请清通或者更换回收管;"));strWarring.append("\r\n");
    strWarring.append(tr("4. 回收泵故障，请清洗或者更换回收泵;"));strWarring.append("\r\n");
    strWarring.append( tr("5. 确认各参数及设备无异常后请进入“打印设置”取消“回收故障处理”的勾选，退回主窗口界面点击“故障恢复”按钮."));strWarring.append("\r\n");
    //strWarring.append( tr("   退回主窗口界面点击“故障恢复”按钮."));strWarring.append("\r\n");
    emit ShowWarnningText(strTitle,strWarring);
}
void MainWindow::onStatusSolvLevelWarn(){
#ifdef X86TEST

#else
    if(!(sysPara->status.statWarn & WARN_STATUS_SOLV_WARN)) return;
#endif

    strTitle = tr("溶剂液位报警");

    strWarring = tr("溶剂液位：溶剂即将耗尽");strWarring.append("\r\n");
    strWarring .append(tr("1. 溶剂耗尽，3小时后将自动关机，请及时添加溶剂。"));strWarring.append("\r\n");
    emit ShowWarnningText(strTitle,strWarring);
}
void MainWindow::onStatusViscosityWarn(){
#ifdef X86TEST

#else
    if(sysPara->status.viscosityFault==1)
#endif
    {
        strTitle = tr("粘度故障报警");
        strWarring = tr("粘度故障:墨水粘度无法自动调整");strWarring.append("\r\n");
        strWarring.append( tr("1. 混合阀失灵，请冲洗或者更换混合阀;"));strWarring.append("\r\n");
        strWarring.append( tr("2. 墨水罐内的墨水异常，请更换新墨水;"));strWarring.append("\r\n");
        emit ShowWarnningText(strTitle,strWarring);
#ifdef X86TEST

#else
    }
    else if(sysPara->status.viscosityFault==2)
    {

#endif
        strTitle = tr("粘度故障报警");
        strWarring= tr("粘度计异常:");strWarring.append("\r\n");
        strWarring.append(tr("1. 泵前过滤网堵塞，请更换泵前滤网;"));strWarring.append("\r\n");
        strWarring.append( tr("2. 粘度泵异常，请清洗或更换粘度泵;"));strWarring.append("\r\n");
        strWarring.append(tr("3. 粘度传感器异常，请检查传感器线路或者更换传感器."));strWarring.append("\r\n");
        emit ShowWarnningText(strTitle,strWarring);
    }

}
void MainWindow::onStatusChargefault(){
#ifdef X86TEST

#else
    if(sysPara->status.lastPhaseFault)
#endif
    {

        strTitle = tr("相位故障报警");
        strWarring = tr("相位故障：相位信号检测异常");strWarring.append("\r\n");
        strWarring.append(tr("1. 墨水分裂不正常，请调整墨水分裂;"));strWarring.append("\r\n");
        strWarring.append(tr("2. 充电槽或者相检头脏污，请清洗充电槽和相检头;"));strWarring.append("\r\n");
        strWarring.append(tr("3. 放大板功能性异常，请更换放大板;"));strWarring.append("\r\n");
        strWarring.append( tr("4. 相检头和墨线的距离过远，请检测喷头活动机构，调整相检头和墨线间的距离;"));strWarring.append("\r\n");
        strWarring.append( tr("5. 地线未接或者外界干扰，请连接地线或者隔离外界干扰;"));strWarring.append("\r\n");
        strWarring.append( tr("6. 墨水质量异常，请更换新墨水。"));strWarring.append("\r\n");
        emit ShowWarnningText(strTitle,strWarring);

    }
}

void MainWindow::OnFinished(int event){
    //msgtest->setText("孔一:60分钟灌浆结束条件!请点击\"结束\"按钮!");
    //msgtest->show();
    msgtest->hide();

}

void MainWindow::onPreviewScene()
{
    pPicScene->clearSelection();
    QSize size(pPicScene->itemsBoundingRect().width(),pPicScene->itemsBoundingRect().height());
    QImage image(size,QImage::Format_ARGB32);
    image.fill(0x00ffffff);//填充白色
    QPainter painter(&image);
    pPicScene->render(&painter,QRectF(),pPicScene->itemsBoundingRect());

    int coldot=0;
    if(sysPara){
        bool MaxCol4000 = sysPara->status.flagOfNo67FPGA;
        previewFlag=1;
        sysPara->status.currPrintRow = 0;
        sysPara->status.variNum = 0;
        sysPara->status.QRvariNum = 0;
        unsigned char *dat;
        if(MaxCol4000){
            dat =sysPara->status.printDat_Normal;
            memset(dat,0,sizeof(sysPara->status.printDat_Normal));
        }else{
            dat =sysPara->status.printDat;
            memset(dat,0,sizeof(sysPara->status.printDat));
        }

        {
            sysPara->status.addSpace = sysPara->para.checkSpace;

            coldot = (int)ui->textEdit->document()->size().width();
            coldot = pPicScene->itemsBoundingRect().width();
            if(coldot > (MaxCol4000?MAX_PRINT_COL_NUM_Normal:MAX_PRINT_COL_NUM_Wide))
                coldot = MaxCol4000?MAX_PRINT_COL_NUM_Normal:MAX_PRINT_COL_NUM_Wide;
            int maxPicHeight = MAX_PRINT_ROW_NUM + 12;
            QSize size(coldot,maxPicHeight);

            sysPara->status.currPrintRow =0;
            sysPara->status.currPrintCol = coldot + ( sysPara->status.addSpace?coldot:0) ; //checkSpace

            QImage image(size,QImage::Format_ARGB32);
            image.fill(0x00ffffff);//填充白色
            QPainter painter(&image);
            QRectF validRectF(pPicScene->itemsBoundingRect().x(),pPicScene->itemsBoundingRect().y(),coldot,maxPicHeight);
            pPicScene->render(&painter,QRectF(),validRectF);

            int firstRow = 0;
            int lastRow = MAX_PRINT_ROW_NUM > maxPicHeight? maxPicHeight:MAX_PRINT_ROW_NUM; //MAX_PRINT_ROW_NUM=40
            int TempVarNum=0;
            int varLastRow=0;

            //接下来就是要把打印到数据data填充以及确认变量的个数，变量对应的开始列和结束行
            for(int j = 0; j < lastRow - firstRow; j++){  // Y
                for(int i = 0; i < coldot; i++){  //
                    QRgb rgb = image.pixel(i,j + firstRow);
                    // 修改code判断逻辑
                    long unsigned int rgbValue = rgb & COLOR_MASK;
                    if(rgb&0x80000000){		//判断alpha
                        if((rgb & 0xf0f0ff) == 0xf0f000){				//处理变量， 查找左下角，因为同一行的左下角是对齐的 看起来这个颜色是黄色
                            bool foundvar=0;
                            if(j>0){
                                QRgb r_rgb = image.pixel(i,j + firstRow+1);
                                if((r_rgb & 0xf0f0ff) != 0xf0f000 ){foundvar =1;}
                                //QRgb r_rgb = image.pixel(i,j + firstRow-1);if((r_rgb & 0xf0f0ff) == 0xf0f000 )foundvar =0;
                            }
                            if(foundvar){
                                if(sysPara->status.variNum < MAX_VARI_NUM){
//                                    sysPara->status.vars[sysPara->status.variNum].startColPos = i+(sysPara->status.addSpace?i:0);
//                                    sysPara->status.vars[sysPara->status.variNum].endRowPos = j;
                                }
                                else TempVarNum++;
                            }
                        }
                        
                        else  if( (rgbValue == MDT_RGB) || (rgbValue == QR_RGB)  ||
                                  (rgbValue == BAR_RGB)){
                            if(sysPara->status.QRvariNum>=4)continue;
                            if(rgbValue == MDT_RGB) { //MDT
                                handleCode(i,j,&varLastRow, MDT);
                            }
                            else if(rgbValue == QR_RGB) { //QR
                                handleCode(i,j,&varLastRow, QR);
                            }
                            else if(rgbValue == BAR_RGB) { //BAR
                                handleCode(i,j,&varLastRow, BAR);
                            }

                            if(sysPara->status.QRvariNum>=4)sysPara->status.QRvariNum=4;
                        }

                        else if((rgb & 0x00ffffff)==EXPIRY_VARI_RECONISE)
                        {   // 有效期变量 : 处理变量， 查找左下角，因为同一行的左下角是对齐的
                        }
                        else if((rgb & 0xfffff0)==0xff0cf0)
                        {   // 有效期变量 : 处理变量， 查找左下角，因为同一行的左下角是对齐的
                        }
                        else if((rgb & 0xffffff)==0xff00ff)
                        {   // 有效期变量 : 处理变量， 查找左下角，因为同一行的左下角是对齐的
                        }
                        else
                        {		//Y = 0.299*R' + 0.587*G' + 0.114*B   //非变量
                            int y = (((rgb&0xff)*299 + ((rgb>>8)&0xff)*587 + ((rgb>>16)&0xff)*114))/1000;
                            if(y < 125 ){
                                dat[MAX_PRINT_ROW_BYTE_NUM*(i+(sysPara->status.addSpace?i:0)) + j/8] |= 1 << (j%8);			//画黑点
                                if((j+1) > sysPara->status.currPrintRow) {
                                    sysPara->status.currPrintRow = j+1;
                                }
                            }
                        }

                    }/*判断alpha end*/
                }
            }

            if(TempVarNum>MAX_VARI_NUM){
                setRunStatus(tr("变量数大于8个，某些变量将不起作用!!!"));
                strTitle=  tr("变量数大于8个，某些变量将不起作用!!!");
                strTitle.append("\r\n");
                strTitle.append(tr("请减少信息中的变量(或计数器)数量."));
                QMessageBox::warning(this, tr("警告"),strTitle,QMessageBox::Ok);
            }

            sysPara->status.variNum = 0;
            sysPara->status.ExpiryVarNum = 0;
            sysPara->print.ExpiryVar.startColPos = 0;
            sysPara->print.ExpiryVar.endRowPos = 0;
            sysPara->print.ExpiryVar.letterSpace =0;
            sysPara->print.CurDateVar.startColPos = 0;
            sysPara->print.CurDateVar.endRowPos = 0;
            sysPara->print.CurDateVar.letterSpace = 0;
            sysPara->status.CurrDateVariNum = 0;
            sysPara->status.QRvariNum=0;//lch add

            // 处理变量和常量的渲染和更新
            handleSceneShow(MaxCol4000, dat);

            if(sysPara->status.currPrintRow>MAX_PRINT_ROW_NUM-1)sysPara->status.currPrintRow=MAX_PRINT_ROW_NUM-1;
            bool found=0;
            lastRow = sysPara->status.currPrintRow;
            for(int j = sysPara->status.currPrintRow; j >2 ; j--){		//计算首行位置
                for(int i = 0; i < coldot; i++){
                    if(dat[MAX_PRINT_ROW_BYTE_NUM*i + j/8] & (1 << (j%8))){
                        lastRow = j+1;
                        found=1;
                        break;
                    }
                }
                if(found)
                    break;
            }
            if(lastRow>MAX_PRINT_ROW_NUM-1)lastRow = MAX_PRINT_ROW_NUM-1;
            if(lastRow<varLastRow)lastRow= varLastRow-1;//在场景模式下，变量的最低一行并不一定是打印的最后一行

            if(lastRow<1) lastRow =1;
            // lastRow只检测了一部分，优先选择大的那个
            sysPara->status.currPrintRow = sysPara->status.currPrintRow > lastRow?
                        sysPara->status.currPrintRow : lastRow;
        }

        if(sysPara->status.QRvariNum) {
            onUpdateDispQRCode(1);
        }

        int wmax = sysPara->status.currPrintRow;
        sysPara->status.currAlterPrintRow = sysPara->status.currPrintRow/2;
        if(sysPara->para.alterPrint.enable<1) sysPara->para.AlterMode=0;
        else {
            if(sysPara->para.AlterMode==0) sysPara->para.AlterMode=1;
            wmax = sysPara->status.currAlterPrintRow;
        }
        /*-------------------------------切换到预览显示窗口-----------------------------------*/
        ui->widgetPrintTextDisplay->setDisplaySize(sysPara->status.currPrintCol,
                                                   sysPara->para.AlterMode?
                                                   sysPara->status.currAlterPrintRow : sysPara->status.currPrintRow);
        ui->stackedWidgetText->setCurrentWidget(ui->pagePrintTextDisplay);
        ui->stackedWidgetOption->setCurrentWidget(ui->pageOption);
        ui->labelTextWidthHeight->setText(tr("[ %1行 x %2列 ]").arg(wmax).arg(sysPara->status.currPrintCol));
        ui->widgetPrintTextDisplay->update();
    }
    previewFlag=0;
}

int MainWindow::calculateMaxSpeed(int backup)
{
    float stroke;
    int valid_array;
    int rongdian = 0;
    int mm;
    int oscfreq = 0;

    //    QSizeF size = ui->textEdit->document()->size();

    switch (sysPara->para.oscillatoFreq) {
    case CRYS_64K:
        oscfreq = 64000;
        break;
    case CRYS_83K:
        oscfreq = 83000;
        break;
    case CRYS_96K:
        oscfreq = 96000;
        break;
    case CRYS_128K:
        oscfreq = 128000;
        break;
    default:
        break;
    }
    stroke = sysPara->para.printColDelay/sysPara->para.synPulseNumPerMm;

    rongdian = sysPara->status.currPrintRow * (float)sysPara->para.reducedPixelNumRatio/100;
    valid_array = sysPara->status.currPrintRow - rongdian;

    switch (sysPara->para.currPrintMode) {
    case FAST_PRINT:
        mm = (float)(stroke * oscfreq /(sysPara->status.currPrintRow +1));
        break;
    case STANDARD_PRINT:
        mm = (float)( (stroke * oscfreq) / (valid_array * 2));
        break;
    case SLOW_PRINT_ONE:
        mm = (float)( (stroke * oscfreq) / (valid_array * 3));
        break;
    case SLOW_PRINT_TWO:
        mm = (float)( (stroke * oscfreq) / (valid_array * 4));
        break;
    case SLOW_PRINT_THR:
        mm = (float)( (stroke * oscfreq) / (valid_array * 5));
        break;
    case SLOW_PRINT_FOR:
        mm = (float)( (stroke * oscfreq) / (valid_array * 6));
        break;
    case SLOW_PRINT_FIV:
        mm = (float)( (stroke * oscfreq) / (valid_array * 7));
        break;
    case SLOW_PRINT_SIX:
        mm = (float)( (stroke * oscfreq) / (valid_array * 8));
        break;
    case SLOW_PRINT_SEV:
        mm = (float)( (stroke * oscfreq) / (valid_array * 9));
        break;
    case SLOW_PRINT_EIG:
        mm = (float)( (stroke * oscfreq) / (valid_array * 10));
        break;
    case SLOW_PRINT_NIE:
        mm = (float)( (stroke * oscfreq) / (valid_array * 11));
        break;
    default:
        mm = backup/sysPara->para.synPulseNumPerMm;
        break;
    }

    return mm;

}

void MainWindow::Test_Start_Stop()
{
    if(test_flag <=0)   return;
    if(test_flag >= RECICLARNUMBER){
        LogInfo::setRunStatusText(tr("回收槽开关检测完成!"));
        test_flag = 0;
        return;
    }
    if((test_flag%2) == 0){
        if(!open_close){
            on_pushButtonReclaimTanOpen_pressed();
            open_close = 1;
        }
    }
    else if(test_flag%2 == 1){
        if(open_close){
            on_pushButtonReclaimTankClose_pressed();
            open_close = 0;
        }
    }
}

int MainWindow::checkRange(QImage textImage, int textColdot,
                           int posX, int posY)
{
    int firstRow = 0;//变量显示底部会多一条横线
    int lastRow = MAX_PRINT_ROW_NUM;

    int variNum = 0;
    for(int j = 0; j < lastRow - firstRow; j++){  // Y
        for(int i = 0; i < textColdot; i++){  //
            QRgb rgb = textImage.pixel(i,j + firstRow);
            long unsigned int rgbValue = rgb & COLOR_MASK;
            if((rgb&0x80000000)){		//判断alpha
                if((rgb & 0xf0f0ff) == 0xf0f000){				//处理变量， 查找左下角，因为同一行的左下角是对齐的 看起来这个颜色是黄色

                    bool textfoundvar = 0;
                    if(j>0){
                        QRgb r_rgb = textImage.pixel(i,j + firstRow+1);
                        if((r_rgb & 0xf0f0ff) != 0xf0f000 )
                        {
                            textfoundvar =1;
                        }
                    }
                    if(textfoundvar) {

                        if(sysPara->status.variNum < MAX_VARI_NUM){
                            sysPara->status.vars[sysPara->status.variNum].startColPos = i+(sysPara->status.addSpace?i:0)+posX;
                            sysPara->status.vars[sysPara->status.variNum].endRowPos = j+posY;

                            if(lastRow<j+1)
                                lastRow=j+1;
                            sysPara->status.variNum ++;
                            variNum++;
                            i+=5;//scene 每一行可能都包含变量

                        }
                        else variNum++;

                    }
                }

                else if((rgbValue == MDT_RGB) || (rgbValue == QR_RGB)  ||
                          (rgbValue == BAR_RGB)){
                    if(sysPara->status.QRvariNum>=4)continue;
                    if(rgbValue == MDT_RGB) { //MDT
                        handleCodeScene(i, j, &lastRow, MDT, posX, posY);
                    }
                    else if(rgbValue == QR_RGB) { //QR
                        handleCodeScene(i, j, &lastRow, QR, posX, posY);
                    }
                    else if(rgbValue == BAR_RGB) { //BAR
                        handleCodeScene(i, j, &lastRow, BAR, posX, posY);
                    }

                    if(sysPara->status.QRvariNum>=4)sysPara->status.QRvariNum=4;
                }

                else if((rgb & 0x0000ffff)==EXPIRY_VARI_RECONISE)
                {   // 有效期变量 : 处理变量， 查找左下角，因为同一行的左下角是对齐的
                    bool foundExVar=0;
                    if(j>0){
                        QRgb r_rgb = textImage.pixel(i,j + firstRow+1);
                        if(((r_rgb & 0x0000ffff) != EXPIRY_VARI_RECONISE )){foundExVar =1;}
                    }
                    if(foundExVar)
                    {
                        if(sysPara->status.ExpiryVarNum == 0)
                        {
                            sysPara->status.ExpiryVarNum ++;
                        }
                        sysPara->print.ExpiryVar.startColPos = i+(sysPara->status.addSpace?i:0)+posX;
                        sysPara->print.ExpiryVar.endRowPos = j+posY;
                        if(lastRow<j+1) lastRow=j+1;

                        i+=10;

                    }
                }
                else if((rgb & 0xfffff0)==0xff0cf0)
                {   // 有效期变量 : 处理变量， 查找左下角，因为同一行的左下角是对齐的
                    bool foundExVar=0;
                    if(j>0){
                        QRgb r_rgb = textImage.pixel(i,j + firstRow+1);
                        if((r_rgb & 0xfffff0) != 0xff0cf0 ){foundExVar =1;}
                    }
                    if(foundExVar)
                    {
                        if(sysPara->status.CurrDateVariNum == 0)
                        {
                            sysPara->status.CurrDateVariNum ++;
                        }
                        sysPara->print.CurDateVar.startColPos = i+(sysPara->status.addSpace?i:0)+posX;
                        sysPara->print.CurDateVar.endRowPos = j + posY;
                        if(lastRow<j+1) lastRow=j+1;

                        i+=10;
                    }
                }

                if(j > sysPara->status.currPrintRow) {
                    sysPara->status.currPrintRow = j+posY;
                }
            }
        }
    }
    return variNum;
}

void MainWindow::handleSceneShow(bool MaxCol4000, unsigned char *dat)
{
    int myvariNum=0;
    QList<QGraphicsItem *> items = ui->senceEditOption->getPicSceneItems();
    foreach (QGraphicsItem *item, items) {
        PicTextItem *picText = qgraphicsitem_cast<PicTextItem*>(item);
        bool ok;

        int textColdot=0;
        textColdot = picText->boundingRect().width();
        if(textColdot > (MaxCol4000?MAX_PRINT_COL_NUM_Normal:MAX_PRINT_COL_NUM_Wide))
            textColdot = MaxCol4000?MAX_PRINT_COL_NUM_Normal:MAX_PRINT_COL_NUM_Wide;
        int maxTextHeight = MAX_PRINT_ROW_NUM + 12;
        QSize textSize(textColdot, maxTextHeight);
        QImage textImage(textSize,QImage::Format_ARGB32);
        textImage.fill(0x00ffffff);//填充白色
        QPainter textPainter(&textImage);

        QRectF validtextRectF(picText->pos().x(),picText->pos().y(),textColdot,picText->document()->size().height());
        pPicScene->render(&textPainter,QRectF(),validtextRectF);

        /*--------------------------------------------------------------------------*/
        int textItemPosX;
        int textItemPosY;
        textItemPosX = picText->pos().x() - pPicScene->itemsBoundingRect().x();
        textItemPosY = picText->pos().y() - pPicScene->itemsBoundingRect().y();

        //接下来就是要把打印到数据data填充以及确认变量的个数，变量对应的开始列和结束行
        checkRange(textImage, textColdot, textItemPosX, textItemPosY);

        //===================一般变量=====================
        QString textVariPattern = "<img src=\":/(\\d*)/(\\d*)_([a-zA-Z_][a-zA-Z0-9_]*)/../image/digitalWidth(\\d*).bmp\" width=\"(\\d*)\" height=\"(\\d*)\" />";
        QRegExp textrx(textVariPattern);
        QString textHtml = picText->toHtml();
        int from = 0;
        while(from < textHtml.size() && from != -1){
            from = textHtml.indexOf(textrx,from);

            if(from != -1){//找到匹配的
                from ++;
                if(myvariNum < sysPara->status.variNum)
                {
                    sysPara->status.vars[myvariNum].digitalNum = textrx.cap(4).toInt(&ok);//第二个匹配，数字到个数
                    sysPara->status.vars[myvariNum].bold = (sysPara->status.vars[myvariNum].digitalNum%100) == 75;
                    if(sysPara->status.vars[myvariNum].bold)
                        sysPara->status.vars[myvariNum].digitalNum = sysPara->status.vars[myvariNum].digitalNum/100;
                    sysPara->status.vars[myvariNum].type = textrx.cap(2).toInt(&ok);//第一个匹配
                    QByteArray fontNameUtf8 = textrx.cap(3).toUtf8();
                    strncpy(sysPara->status.vars[myvariNum].fontname, fontNameUtf8.data(), sizeof(sysPara->status.vars[myvariNum].fontname) - 1);
                    sysPara->status.vars[myvariNum].fontname[sizeof(sysPara->status.vars[myvariNum].fontname) - 1] = '\0';
                    sysPara->status.vars[myvariNum].width = textrx.cap(5).toInt(&ok)*(sysPara->status.addSpace?2:1);
                    sysPara->status.vars[myvariNum].height = textrx.cap(6).toInt(&ok);
                    sysPara->status.vars[myvariNum].startRowPos = sysPara->status.vars[myvariNum].endRowPos - sysPara->status.vars[myvariNum].height+1;

                    if(sysPara->status.vars[myvariNum].startRowPos<0)
                        sysPara->status.vars[myvariNum].startRowPos=0;

                    int item_x_start_pos = sysPara->status.vars[myvariNum].startColPos;
                    int item_x_end_pos = item_x_start_pos + sysPara->status.vars[myvariNum].width ;
                    if(item_x_end_pos > (MaxCol4000?MAX_PRINT_COL_NUM_Normal:MAX_PRINT_COL_NUM_Wide))
                        item_x_end_pos = MaxCol4000?MAX_PRINT_COL_NUM_Normal:MAX_PRINT_COL_NUM_Wide;
                    int item_y_start_pos = sysPara->status.vars[myvariNum].startRowPos;
                    int item_y_end_pos = sysPara->status.vars[myvariNum].endRowPos+1 ;
                    if(item_y_start_pos < 0)
                        item_y_start_pos = 0;
                    // 擦除占位图
                    for(int i = item_x_start_pos; i < item_x_end_pos; i++){
                        for(int j = item_y_start_pos; j < item_y_end_pos; j++){
                            dat[MAX_PRINT_ROW_BYTE_NUM*(i+(sysPara->status.addSpace?0:0)) + j/8] &= ~(1 << (j%8));		//将画点取消掉
                        }
                    }
                    sysPara->status.vars[myvariNum].height = textrx.cap(6).toInt(&ok);
                    if(sysPara->status.vars[myvariNum].height>16  ){
                        if(sysPara->status.vars[myvariNum].height==24)
                            ;
                        else {
                            if(sysPara->status.vars[myvariNum].startRowPos)
                            {
                                sysPara->status.vars[myvariNum].endRowPos--;
                                sysPara->status.vars[myvariNum].startRowPos--;
                            }
                        }
                    }

                    if(sysPara->status.vars[myvariNum].type ==  RANDOMNUM)
                    {
                        sysPara->status.RandomDigitNum = sysPara->status.vars[myvariNum].digitalNum;
                    }

                    sysPara->status.vars[myvariNum].letterSpace = 0;
                    if(sysPara->status.vars[myvariNum].digitalNum){			//算出letterspace
                        QFont font;
                        font.setFamily(sysPara->status.vars[myvariNum].fontname); // 20160812
                        font.setPixelSize(sysPara->status.vars[myvariNum].height);
                        font.setWeight(sysPara->status.vars[myvariNum].bold?QFont::Bold:QFont::Normal);
                        font.setLetterSpacing(QFont::AbsoluteSpacing, 0);
                        QFontMetrics fontMetrics(font);
                        int charWidth = (fontMetrics.horizontalAdvance("0123456789"))/10 ;
                        sysPara->status.vars[myvariNum].letterSpace =
                                (sysPara->status.vars[myvariNum].width - charWidth * sysPara->status.vars[myvariNum].digitalNum)
                                / (sysPara->status.vars[myvariNum].digitalNum);
                    }
                    myvariNum++;
                }
            }
        }
        //==========================一般变量结束=======================

        //=========================二维码变量==================
        searchQrVar();

        //=========================有效期/生产日期变量==================
        searchExpiryVar(textHtml);

        //=========================数模转换=================
        generateCharRamData();
    }
}

void MainWindow::UpdateDateTimeQRCode(QString strContent)
{
    if(!printingFlag || !sysPara->para.isCheckInsertTime)
    {
        return ;
    }

    QLabel *labelFontSize = ui->textEditOption->getLabelFontSize();
    bool ok;
    int font_size = labelFontSize->text().toInt(&ok,10);
    QString font_family = Public::getFontFamily(font_size);
    if(sysPara->para.EditMode == TXTFILE)
    {
        QFile file("/home/plg/doc/modbusQR.bmp");
        if(file.exists())
        {
            file.remove();
        }
        if(dlgqrcode->barCodeFlag == 1)
        {
            barcode->extSetText("");
            barcode->GetOption((bcOption_t*)&sysPara->para.bcOption);
        }
        else
        {
            QString receiveContent = QString::fromUtf8(strContent.toStdString().c_str());
            dlgqrcode->extSetText(receiveContent,sysPara->para.qrOption.type);
            dlgqrcode->GetOption((qrOption_t *)&sysPara->para.qrOption);
        }

        QString txt_fomart = "";
        txt_fomart = QString::fromUtf8("<span style=\" font-family:'%1'; font-size:%2pt;font-weight:%3;\">").arg(font_family).arg(font_size)
                .arg(ui->textEditOption->getCheckBoxBold()->isChecked()? 600:400);
        txt_fomart += barcode->getLabe_TxtString().toUtf8();
        txt_fomart += "&nbsp;</span>";
        txt_fomart  += "<img src=\"/home/plg/doc/modbusQR.bmp\" />";
        ui->textEditOption->textEdit->setHtml(txt_fomart);
        ui->textEditOption->textEdit->moveCursor(QTextCursor::EndOfLine);
        on_pushButtonStartPrint_pressed();//开始打印
    }

}
QSizeF MainWindow::getDocSize()const
{
    QSizeF size = ui->textEdit->document()->size();
    return size;
}

#ifdef EnableArabic
void MainWindow::setOpenFileName(QString fileName){
    qDebug()<<"set open fileName"<<fileName;
    int lastIndex = fileName.lastIndexOf(".");
    QFont font;
    if(lastIndex != -1){
        int secondLastIndex = fileName.lastIndexOf(".",lastIndex-1);
        if(secondLastIndex != -1){
            QString subsuffix = fileName.mid(secondLastIndex);
            if(subsuffix.contains(".a")){
                QString subsuffix2=fileName.mid(lastIndex);
                QString subname=fileName.mid(0,secondLastIndex);
                QString stringhtml=QString("<span style=font-family:'biyangarabic';>%1</span><span style=font-family:'biyang';>%2</span>").arg(subname).arg(subsuffix2);
                ui->labelOpenedFileName->setText(stringhtml);
            }else{
                font.setFamily("biyang");
                ui->labelOpenedFileName->setFont(font);
                ui->labelOpenedFileName->setText(fileName);
            }
        }else{
            font.setFamily("biyang");
            ui->labelOpenedFileName->setFont(font);
            ui->labelOpenedFileName->setText(fileName);
        }
    }else{
        ui->labelOpenedFileName->setText(fileName);
    }
}
#endif


void MainWindow::showFPGAData(QByteArray data){
    ui->textEdit->clear();
    ui->textEdit->setText(QString::fromUtf8(data));
}


void MainWindow::showFPGAqueuesize(int size){
    sysPara->status.sizeFPGA = size;
}

void MainWindow::showSTM32queuesize(int size){
    sysPara->status.sizeSTM32 = size;
}

void MainWindow::showqueueFPGAsize(int size){
    sysPara->status.sizequeueFPGA = size;
}

void MainWindow::on_pushButton_Reboot_clicked()
{
    QMessageBox::StandardButton ret = QMessageBox::Ok;
    ret = QMessageBox::warning(this, tr("警告"),
                               tr("是否确认重启?"),
                               QMessageBox::Ok | QMessageBox::Cancel);
    if (ret == QMessageBox::Ok){
        if(!sysPara->status.selfCheckDone)
            sysPara->status.selfCheckDone = true;
        this->setDisabled(true);
        emit setDisableAll();
        if(!TEST_MODE && sysPara->para.flagOfReclaimPumEnable){
            for(int i=15;i>11;i--)
            {
                if(i == 15){
                    sysPara->status.isPumpValveControledByHand = true;		//停止自动
                    sysPara->devOp->controlInkValve(true);
                    sysPara->devOp->controlInkValvePWM(true);
                    sysPara->devOp->controlReclaimPump(true,true);
                    sysPara->devOp->controlViscosityPump(true);
                    sysPara->devOp->controlCycleValve(true);
                    sysPara->para.gearPumpValue = 0;
                    sysPara->devOp->WriteMoterPump();
                }
                if(i == 12){
                    sysPara->devOp->controlInkValve(false);
                    sysPara->devOp->controlInkValvePWM(false);
                }
                this->setRunStatus(tr("正在准备重启,请等待%1秒...............").arg(i));
                MySleep(1000);
            }
        }
        sysPara->devOp->controlReclaimTankOpen(true);
        sysPara->status.isPumpValveControledByHand = true;		//停止自动
        if(sysPara->para.gearPumpEnable ){
            if(!sysPara->para.flagOfReclaimPumEnable){
                sysPara->para.gearPumpValue = 360;
                sysPara->devOp->WriteMoterPump();
            }
            else{
                sysPara->devOp->controlReclaimPump(true,false);
                sysPara->para.gearPumpValue = 0;
                sysPara->devOp->WriteMoterPump();
            }
        }
        else{
            sysPara->para.reclaimPumpPWMWidth = 95;
            sysPara->devOp->controlReclaimPump(true,true);
        }

        if(!sysPara->devOp->isViscosityPumpOpen())
            sysPara->devOp->controlViscosityPump(true);
        sysPara->devOp->controlCycleValve(true);
        sysPara->devOp->controlInkValve(false);		//关供墨
        sysPara->devOp->controlInkValvePWM(false);		//关供墨

        if(!TEST_MODE){
            for(int i=11;i>7;i--)
            {
                if(i==9)
                    sysPara->devOp->controlReclaimTankOpen(false);
                this->setRunStatus(tr("正在准备重启,请等待%1秒...............").arg(i));
                MySleep(1000);
            }
        }

        if(!sysPara->status.lostCommuFlag){
            sysPara->para.calandar_and_dat.cnt1CurrValue = QString::number(sysPara->status.calandar_and_dat.cnt1CurrValue,16).toInt();
            sysPara->para.calandar_and_dat.cnt2CurrValue = QString::number(sysPara->status.calandar_and_dat.cnt2CurrValue,16).toInt();
            sysPara->para.Counter3.cnt3CurrValue = QString::number(sysPara->status.Status_Counter3.cnt3CurrValue,16).toInt();

            updateTotalCnt(0);
            sysPara->saveParaToFile();					// 关机前将相关配置保存
        }
        sysPara->status.powerOffAppending = false;
        if(!TEST_MODE){
            for(int i=7;i>0;i--)
            {
                if(i == 5)
                    sysPara->devOp->controlReclaimTankClose(true);
                if(i == 4){
                    sysPara->devOp->controlViscosityPump(false);
                    sysPara->devOp->controlCycleValve(false);
                    sysPara->devOp->controlReclaimPump(false,false);
                    sysPara->para.gearPumpValue = 0;
                    sysPara->devOp->WriteMoterPump();
                }
                this->setRunStatus(tr("正在准备重启,请等待%1秒...............").arg(i));
                MySleep(1000);
            }
        }

        sysPara->saveParaToFile();					// 关机前将相关配置保存
        sysPara->saveRFIDPara();
        MySleep(200);
        system("sync");//缓存同步
        QCoreApplication::quit();
    }
}

void MainWindow::setReBootQtUIEnable(bool flag){
    ui->pushButton_Reboot->setEnabled(flag);
}

void MainWindow::on_pushButtonPowerOff_clicked()
{
    _on_pushButtonPowerOff_pressed(true);
}

/**
 * @brief MainWindow::slt_updateNetworkQR
 *   响应 dlgQrCode::sig_updateNetworkQR 信号，将网络（TCP）收到的新二维码
 *   更新到主界面的文本编辑区。
 */
void MainWindow::slt_updateNetworkQR()
{
#ifdef _2DCODE_
    // 图片模式下不操作文本编辑区，直接返回
    if(sysPara->para.EditMode==PICFILE)  return;

    sysPara->saveParaToFile();

    // 刷新预览
    if(sysPara->para.EditMode == TXTFILE) {
        PreviewPressed();
    } else if(sysPara->para.EditMode == SCENE) {
        onPreviewScene();
    }

    // 切换到预览页面，让用户看到更新后的二维码
    ui->stackedWidgetText->setCurrentWidget(ui->pagePrintTextDisplay);

    // 如果正在打印，立即发送新数据到 FPGA
    if(startPrintingFlag && printingFlag) {
        SendPrintDataToFpga(0);
    }
#endif
}

void MainWindow::slt_clearAllQRCode()
{
#ifdef _2DCODE_
    // 1. 清除 textEdit 中的所有二维码图片
    QTextCursor cursor(ui->textEdit->document());
    bool modified = false;

    while (!cursor.atEnd()) {
        cursor.movePosition(QTextCursor::NextCharacter, QTextCursor::KeepAnchor);
        QTextCharFormat fmt = cursor.charFormat();

        if (fmt.isImageFormat()) {
            QString imgName = fmt.toImageFormat().name();
            // 删除所有二维码相关的图片（包括普通二维码和网络二维码）
            if (imgName.contains("QRV") || imgName.contains("DMTV") ||
                    imgName.contains("BARV") || imgName.contains("networkQR")) {
                cursor.deleteChar();
                modified = true;
            }
        }
        cursor.clearSelection();
    }

    // 2. 清除场景中的二维码变量标记
    sysPara->status.QRvariNum = 0;
    memset(sysPara->print.QRvars, 0, sizeof(sysPara->print.QRvars));

    // 3. 复位二维码参数
    sysPara->para.qrOption.width = 0;
    sysPara->para.qrOption.height = 0;

    // 4. 刷新显示
    if (modified) {
        ui->widgetPrintTextDisplay->update();
        LogInfo::setRunStatusText(tr("已清除所有二维码，准备添加网络二维码"));
    }
#endif
}

extern int baudRateValue;
void MainWindow::UpdateUIVersion(){
    int fpgaType = sysPara->status.fpgaVersionNum>>12;
    QString fpgaVersion;
    if(fpgaType == 6){
        fpgaVersion = "72";
    }else if(fpgaType == 1){
        fpgaVersion = "67";
    }

    fpgaVersion = fpgaVersion + QString("_F%1.%2.%3").arg(sysPara->status.fpgaVersionNum >> 12)
            .arg((sysPara->status.fpgaVersionNum>>8) & 0x0f).arg(sysPara->status.fpgaVersionNum&0xff);

    QString STM32Ver = QString("S:%1.%2.%3_B%4").arg((sysPara->status.stm32Verion>>16)&0x7F)
            .arg((sysPara->status.stm32Verion>>8) & 0xFF).arg(sysPara->status.stm32Verion&0xFF).arg(baudRateValue);

    QString VernonBach = SUB_RFID;
//    VernonBach.sprintf("A%d.%d.%02d%s%s", UP_PRINTER_MAJOR_VER, UP_PRINTER_MINOR_VER,UP_PRINTER_RIVISION_VER,SUB_VERSION,SUB_RFID);

    QString Mac = QString::number(sysPara->status.machineMac);
    LogInfo::showVerionInformation(Mac,VernonBach,fpgaVersion,STM32Ver,sysPara->status.flagOfPowerOnMode);
}

void MainWindow::checkPrintingInterval(){
    unsigned int type = sysPara->status.fpgaVersionNum >> 12;
    if(sysPara->para.printTriggerMode == PRINT_TRIGGER_SYNCHRONIZER && type == 8)   //72版本同步模式下，判断喷印间隔是否设置合理
    {
        QSizeF size = ui->textEdit->document()->size();
        float stroke,print_len_min;
        stroke = sysPara->para.printColDelay/sysPara->para.synPulseNumPerMm;
        print_len_min = stroke * size.width();
        if(print_len_min > sysPara->para.synTriggerPrintLenMm && !sysPara->para.charWidthSetEnable)
        {
            QMessageBox::information(this,tr("错误"),tr("喷印间隔过短,应高于%1!").arg(print_len_min));
            return;
        }
    }
}