#include "DlgVolteParaNo73.h"
#include "DevOp.h"
#include <QFile>

DlgVolteParaNo73::DlgVolteParaNo73(DevOp *devOp, QWidget *parent)
    : QDialog(parent)
    , m_devOp(devOp)
{
    memset(editContinuous, 0, sizeof(editContinuous));
    memset(editFull, 0, sizeof(editFull));
    memset(editFullRowDelay, 0, sizeof(editFullRowDelay));
    memset(editRowDelay, 0, sizeof(editRowDelay));
    memset(editHead1RowDelay, 0, sizeof(editHead1RowDelay));
    memset(edit1Dot, 0, sizeof(edit1Dot));
    memset(editOtherAdjust, 0, sizeof(editOtherAdjust));
    memset(edit2Dots, 0, sizeof(edit2Dots));
    memset(edit3Dots, 0, sizeof(edit3Dots));
    memset(edit4Dots, 0, sizeof(edit4Dots));
    memset(edit5Dots, 0, sizeof(edit5Dots));
    memset(editGap3Dot, 0, sizeof(editGap3Dot));
    memset(editGap, 0, sizeof(editGap));
    memset(editBigDot, 0, sizeof(editBigDot));
    memset(editGeneralPara, 0, sizeof(editGeneralPara));

    setupUI();
}

DlgVolteParaNo73::~DlgVolteParaNo73()
{
}

// 创建4列网格布局的tab页（竖排）
QWidget* DlgVolteParaNo73::createGridTab(int count, QLineEdit* edits[])
{
    QWidget *page = new QWidget(this);
    QGridLayout *grid = new QGridLayout(page);
    grid->setSpacing(2);
    grid->setContentsMargins(4, 4, 4, 4);

    int numCols = 4;
    int rowsPerCol = (count + numCols - 1) / numCols;

    for (int i = 0; i < count; i++) {
        int col = i / rowsPerCol;
        int row = i % rowsPerCol;

        QLabel *label = new QLabel(QString("v%1").arg(i), page);
        label->setFixedWidth(28);
        label->setAlignment(Qt::AlignRight | Qt::AlignVCenter);

        QLineEdit *edit = new QLineEdit("0", page);
        edit->setAlignment(Qt::AlignCenter);
        edits[i] = edit;

        grid->addWidget(label, row, col * 2);
        grid->addWidget(edit, row, col * 2 + 1);
    }

    for (int c = 0; c < numCols; c++) {
        grid->setColumnStretch(c * 2, 0);
        grid->setColumnStretch(c * 2 + 1, 1);
    }

    return page;
}

void DlgVolteParaNo73::setupUI()
{
    setWindowTitle(QString("No73充电参数编辑"));
    
    QVBoxLayout *mainLayout = new QVBoxLayout(this);
    mainLayout->setContentsMargins(4, 4, 4, 4);
    mainLayout->setSpacing(4);

    tabWidget = new QTabWidget(this);

    tabWidget->addTab(createGridTab(48, editContinuous),    QString("连续电压"));
    tabWidget->addTab(createGridTab(48, editFullRowDelay),  QString("满电延迟"));
    tabWidget->addTab(createGridTab(48, editRowDelay),      QString("点延迟"));
    tabWidget->addTab(createGridTab(48, editHead1RowDelay), QString("首1点延迟"));
    tabWidget->addTab(createGridTab(48, editOtherAdjust),   QString("其他调整"));
    tabWidget->addTab(createGridTab(48, editFull),          QString("满电"));
    tabWidget->addTab(createGridTab(48, edit1Dot),          QString("单点"));
    tabWidget->addTab(createGridTab(48, edit2Dots),         QString("两点"));
    tabWidget->addTab(createGridTab(48, edit3Dots),         QString("三点"));
    tabWidget->addTab(createGridTab(48, edit4Dots),         QString("四点"));
    tabWidget->addTab(createGridTab(48, edit5Dots),         QString("五点"));
    tabWidget->addTab(createGridTab(48, editGap3Dot),       QString("3_空点"));
    tabWidget->addTab(createGridTab(48, editGap),           QString("空点"));
    tabWidget->addTab(createGridTab(8, editBigDot),         QString("巨点"));
    tabWidget->addTab(createGridTab(80, editGeneralPara),   QString("通用参数"));

    mainLayout->addWidget(tabWidget);

    // 底部按钮栏
    QHBoxLayout *btnLayout = new QHBoxLayout();
    btnLoad = new QPushButton(QString("读取当前值"), this);
    btnSave = new QPushButton(QString("保存并推送FPGA"), this);
    btnLoad->setMinimumHeight(40);
    btnSave->setMinimumHeight(40);
    btnLayout->addWidget(btnLoad);
    btnLayout->addStretch();
    btnLayout->addWidget(btnSave);
    mainLayout->addLayout(btnLayout);

    connect(btnLoad, SIGNAL(clicked()), this, SLOT(onBtnLoadClicked()));
    connect(btnSave, SIGNAL(clicked()), this, SLOT(onBtnSaveClicked()));
}

// ========== 数据加载：结构体 → UI ==========

void DlgVolteParaNo73::loadDataToUI()
{
    if (!sysPara) return;

    voltePara_t_No73 &data = sysPara->voltePara_No73;

    // 连续电压
    for (int i = 0; i < 48; i++)
        editContinuous[i]->setText(QString::number(data.pixel_continous_table[i]));

    // 满电延迟
    for (int i = 0; i < 48; i++)
        editFullRowDelay[i]->setText(QString::number(data.full_row_delay_table[i]));

    // 点延迟
    for (int i = 0; i < 48; i++)
        editRowDelay[i]->setText(QString::number(data.row_delay_table[i]));

    // 首1点延迟
    for (int i = 0; i < 48; i++)
        editHead1RowDelay[i]->setText(QString::number(data.head1_row_delay_table[i]));

    // 其他调整：steal,head2,head3,tail2 四个值逗号分隔
    for (int i = 0; i < 48; i++) {
        editOtherAdjust[i]->setText(QString("%1,%2,%3,%4")
            .arg(data.pixel_steal_table[i])
            .arg(data.pixel_head2_table[i])
            .arg(data.pixel_head3_table[i])
            .arg(data.pixel_tail2_table[i]));
    }

    // 满电
    for (int i = 0; i < 48; i++)
        editFull[i]->setText(QString::number(data.pixel_full_table[i]));

    // 单点
    for (int i = 0; i < 48; i++)
        edit1Dot[i]->setText(QString::number(data.pixel_1_table[i]));

    // 两点（2值逗号分隔）
    for (int i = 0; i < 48; i++) {
        edit2Dots[i]->setText(QString("%1,%2")
            .arg(data.pixel_2_table[i][0])
            .arg(data.pixel_2_table[i][1]));
    }

    // 三点（3值逗号分隔）
    for (int i = 0; i < 48; i++) {
        edit3Dots[i]->setText(QString("%1,%2,%3")
            .arg(data.pixel_3_table[i][0])
            .arg(data.pixel_3_table[i][1])
            .arg(data.pixel_3_table[i][2]));
    }

    // 四点（4值逗号分隔）
    for (int i = 0; i < 48; i++) {
        edit4Dots[i]->setText(QString("%1,%2,%3,%4")
            .arg(data.pixel_4_table[i][0])
            .arg(data.pixel_4_table[i][1])
            .arg(data.pixel_4_table[i][2])
            .arg(data.pixel_4_table[i][3]));
    }

    // 五点（5值逗号分隔）
    for (int i = 0; i < 48; i++) {
        edit5Dots[i]->setText(QString("%1,%2,%3,%4,%5")
            .arg(data.pixel_5_table[i][0])
            .arg(data.pixel_5_table[i][1])
            .arg(data.pixel_5_table[i][2])
            .arg(data.pixel_5_table[i][3])
            .arg(data.pixel_5_table[i][4]));
    }

    // 3_空点（5值逗号分隔）
    for (int i = 0; i < 48; i++) {
        editGap3Dot[i]->setText(QString("%1,%2,%3,%4,%5")
            .arg(data.pixel_gap_post_3dot_table[i][0])
            .arg(data.pixel_gap_post_3dot_table[i][1])
            .arg(data.pixel_gap_post_3dot_table[i][2])
            .arg(data.pixel_gap_post_3dot_table[i][3])
            .arg(data.pixel_gap_post_3dot_table[i][4]));
    }

    // 空点（5值逗号分隔）
    for (int i = 0; i < 48; i++) {
        editGap[i]->setText(QString("%1,%2,%3,%4,%5")
            .arg(data.pixel_gap_table[i][0])
            .arg(data.pixel_gap_table[i][1])
            .arg(data.pixel_gap_table[i][2])
            .arg(data.pixel_gap_table[i][3])
            .arg(data.pixel_gap_table[i][4]));
    }

    // 巨点 pixel_big_table[8][8]，每行8个逗号分隔值
    for (int i = 0; i < 8; i++) {
        QString str;
        for (int j = 0; j < 8; j++) {
            if (j > 0) str += ",";
            str += QString::number((qint8)data.pixel_big_table[i][j]);
        }
        editBigDot[i]->setText(str);
    }

    // 通用参数：前16项为pixel_para_table，后64项为pixel_general_dac_parameter
    for (int i = 0; i < 16; i++)
        editGeneralPara[i]->setText(QString::number(data.pixel_para_table[i]));
    for (int i = 0; i < 64; i++)
        editGeneralPara[16 + i]->setText(QString::number(data.pixel_general_dac_parameter[i]));
}

// ========== 数据保存：UI → 结构体 ==========

void DlgVolteParaNo73::saveDataFromUI()
{
    if (!sysPara) return;

    voltePara_t_No73 &data = sysPara->voltePara_No73;

    // 连续电压
    for (int i = 0; i < 48; i++)
        data.pixel_continous_table[i] = (qint16)editContinuous[i]->text().toInt();

    // 满电延迟
    for (int i = 0; i < 48; i++)
        data.full_row_delay_table[i] = (qint16)editFullRowDelay[i]->text().toInt();

    // 点延迟
    for (int i = 0; i < 48; i++)
        data.row_delay_table[i] = (qint16)editRowDelay[i]->text().toInt();

    // 首1点延迟
    for (int i = 0; i < 48; i++)
        data.head1_row_delay_table[i] = (qint16)editHead1RowDelay[i]->text().toInt();

    // 其他调整：steal,head2,head3,tail2
    for (int i = 0; i < 48; i++) {
        QStringList parts = editOtherAdjust[i]->text().split(",");
        data.pixel_steal_table[i] = parts.size() > 0 ? (qint16)parts[0].toInt() : 0;
        data.pixel_head2_table[i] = parts.size() > 1 ? (qint16)parts[1].toInt() : 0;
        data.pixel_head3_table[i] = parts.size() > 2 ? (qint16)parts[2].toInt() : 0;
        data.pixel_tail2_table[i] = parts.size() > 3 ? (qint16)parts[3].toInt() : 0;
    }

    // 满电
    for (int i = 0; i < 48; i++)
        data.pixel_full_table[i] = (qint16)editFull[i]->text().toInt();

    // 单点
    for (int i = 0; i < 48; i++)
        data.pixel_1_table[i] = (qint16)edit1Dot[i]->text().toInt();

    // 两点
    for (int i = 0; i < 48; i++) {
        QStringList parts = edit2Dots[i]->text().split(",");
        for (int j = 0; j < 2; j++)
            data.pixel_2_table[i][j] = parts.size() > j ? (qint16)parts[j].toInt() : 0;
    }

    // 三点
    for (int i = 0; i < 48; i++) {
        QStringList parts = edit3Dots[i]->text().split(",");
        for (int j = 0; j < 3; j++)
            data.pixel_3_table[i][j] = parts.size() > j ? (qint16)parts[j].toInt() : 0;
    }

    // 四点
    for (int i = 0; i < 48; i++) {
        QStringList parts = edit4Dots[i]->text().split(",");
        for (int j = 0; j < 4; j++)
            data.pixel_4_table[i][j] = parts.size() > j ? (qint16)parts[j].toInt() : 0;
    }

    // 五点
    for (int i = 0; i < 48; i++) {
        QStringList parts = edit5Dots[i]->text().split(",");
        for (int j = 0; j < 5; j++)
            data.pixel_5_table[i][j] = parts.size() > j ? (qint16)parts[j].toInt() : 0;
    }

    // 3_空点
    for (int i = 0; i < 48; i++) {
        QStringList parts = editGap3Dot[i]->text().split(",");
        for (int j = 0; j < 5; j++)
            data.pixel_gap_post_3dot_table[i][j] = parts.size() > j ? (qint16)parts[j].toInt() : 0;
    }

    // 空点
    for (int i = 0; i < 48; i++) {
        QStringList parts = editGap[i]->text().split(",");
        for (int j = 0; j < 5; j++)
            data.pixel_gap_table[i][j] = parts.size() > j ? (qint16)parts[j].toInt() : 0;
    }

    // 巨点
    for (int i = 0; i < 8; i++) {
        QStringList parts = editBigDot[i]->text().split(",");
        for (int j = 0; j < 8; j++)
            data.pixel_big_table[i][j] = parts.size() > j ? (qint8)parts[j].toInt() : 0;
    }

    // 通用参数
    for (int i = 0; i < 16; i++)
        data.pixel_para_table[i] = (qint16)editGeneralPara[i]->text().toInt();
    for (int i = 0; i < 64; i++)
        data.pixel_general_dac_parameter[i] = (qint16)editGeneralPara[16 + i]->text().toInt();
}

// ========== 按钮槽函数 ==========

void DlgVolteParaNo73::onBtnLoadClicked()
{
    loadDataToUI();
}

void DlgVolteParaNo73::onBtnSaveClicked()
{
    saveDataFromUI();

    QFile file(DOC_ROOT_DIR"voltePara_No73.bin");
    if(!file.open(QIODevice::WriteOnly)) {
        QMessageBox::information(this, QString("注意"), QString("充电数据已经写入FPGA, 但是没有保存到文件。"));
        return;
    }

    int written = file.write((const char*)&(sysPara->voltePara_No73), sizeof(voltePara_t_No73));
    file.close();

    if(written != sizeof(voltePara_t_No73)) {
        QMessageBox::information(this, QString("注意"), QString("写入文件voltePara_No73.bin失败"));
    }

    if (m_devOp) {
        m_devOp->writeDacValue2Fpga_No73();
    }

    QMessageBox::information(this, QString("完成"), QString("充电参数已保存并推送至FPGA。"));
}