hlp:分段计米部分bug修复，按需求不需要超级密码就可以使用分段计米

DevOp.cpp

@@ -3179,7 +3179,6 @@ void DevOp::writeCnt1GroupSetting(bool bCntByGroupEnable){
     {
         fpgaWr(WRITE_CNT1GROUP_COUNT,(unsigned char *)&sysPara->para.Cnt1ByGroup.cnt1GroupCnt,sizeof(sysPara->para.Cnt1ByGroup.cnt1GroupCnt));
 
-        qDebug() << "Groups of CNT1: " << sysPara->para.Cnt1ByGroup.cnt1GroupCnt;
         for(int i=0;i<sysPara->para.Cnt1ByGroup.cnt1GroupCnt;i++)
         {
             cnt1GroupSettingSend.cnt1GroupNum = (unsigned char)i;
@@ -3225,7 +3224,6 @@ void DevOp::writeCnt2GroupSetting(bool bCntByGroupEnable)
     {
         fpgaWr(WRITE_CNT2GROUP_COUNT,(unsigned char *)&sysPara->para.Cnt2ByGroup.cnt2GroupCnt,sizeof(sysPara->para.Cnt2ByGroup.cnt2GroupCnt));
 
-        qDebug() << "sysPara->para.Cnt2ByGroup.cnt2GroupCnt： " << sysPara->para.Cnt2ByGroup.cnt2GroupCnt;
         for(int i=0;i<sysPara->para.Cnt2ByGroup.cnt2GroupCnt;i++)
         {
             cnt2GroupSettingSend.cnt2GroupNum = (unsigned char)i;

InkJetPrinter.cpp

@@ -882,7 +882,7 @@ void InkJetPrinter::handleStoppedState(int err, bool canSwitch)
 void InkJetPrinter::handleStartingState(int err, int actual, int target)
 {
     const int STARTING_TO_RUNNING_RANGE = 30;  // 进入目标±50范围转到运行状态
-    const float MAX_WORKING_SPEED = 500.0f;    // 最大工作转速
+    const float MAX_WORKING_SPEED = 350.0f;    // 最大工作转速
     const float START_SPEED_STEP_LARGE = 40.0f;
     const float START_SPEED_STEP_MED = 30.0f;
     const float START_SPEED_STEP_SMALL = 20.0f;
@@ -1006,7 +1006,7 @@ void InkJetPrinter::handleRunningState(int err, bool canSwitch)
 
     // 限制范围
     const float MIN_RUNNING_SPEED = 30.0f;  // 最低运行转速（低于此值泵不转）
-    const float MAX_WORKING_SPEED = 500.0f;
+    const float MAX_WORKING_SPEED = 350.0f;
 
     if(u < MIN_RUNNING_SPEED) u = MIN_RUNNING_SPEED;
     if(u > MAX_WORKING_SPEED) u = MAX_WORKING_SPEED;
@@ -1705,9 +1705,10 @@ void InkJetPrinter::timerHandler(void){
             if(sysPara->status.RandomNum>0)
                 sysPara->devOp->Read_RanddomFromFpga();
 #ifdef COUNTER1_BY_GROUP /* 分段计米 */
-            cnt1GroupCheck();//分段计米
+//            cnt1GroupCheck();//分段计米
-#endif
             cntGroupCheck();//分段计米
+#endif
+
 
             QWidget *widget = this->currentWidget();
             static bool read_flag =  false;

PrintSetting.cpp

@@ -139,9 +139,6 @@ PrintSetting::PrintSetting(QWidget *parent) :
    current_print_col_num=0;
    ui->tabWidget_2->addTab(ui->tab_11,tr("打印电压缩放"));
 
-   #ifdef COUNTER2_BY_GROUP
-   ui->secionCountPanel->hide();
-   #endif
 }
 
 PrintSetting::~PrintSetting()
@@ -197,7 +194,11 @@ void  PrintSetting::bindSysPara(SysPara *sysPara){
     this->sysPara =sysPara;
     //ui->volDacEdit
     //ui->volDacEdit->bindSysPara(sysPara);
-    if(sectionalWid) sectionalWid->bindSysPara(sysPara);
+#ifdef COUNTER2_BY_GROUP
+    ui->secionCountPanel->hide();
+    ui->tabWidget_2->addTab(ui->tab_9,tr("其他设置"));
+    initSection();
+#endif
 }
 
 void  PrintSetting::PrintupdateSysParaToUI()
@@ -383,26 +384,24 @@ void PrintSetting::updateSysParaToUI(){
         ModuleHideDisplay();
         displayForAdjustVoltage(sysPara->para.flagOfAdjustVoltage);
 
-        // todo
-        LoadCnt1GroupSettingsToUI();
 #ifdef COUNTER2_BY_GROUP
         SectionalManager::instance()->emitLoadUI();
+#else
+        LoadCnt1GroupSettingsToUI();
 #endif
         if(sysPara->para.mode0211 || sysPara->para.FullColFixVal)
         {
             ui->spinBoxStartVoltage->setEnabled(false);
             ui->spinBoxEndVoltage->setEnabled(false);
         }
-        if(sysPara->para.flagOfCnt1GroupDisp)
+//        if(sysPara->para.flagOfCnt1GroupDisp)
-        {
+//        {
-            //edit@12-03
+//            //edit@12-03
-            const int indexTab=ui->tabWidget_2->indexOf(ui->tab_9);
+//            const int indexTab=ui->tabWidget_2->indexOf(ui->tab_9);
-            if(-1==indexTab) {
+//            if(-1==indexTab) {
-             ui->tabWidget_2->addTab(ui->tab_9,tr("其他设置"));
+//             ui->tabWidget_2->addTab(ui->tab_9,tr("其他设置"));
-            }
+//            }
-
+//        }
-
-        }
         if(sysPara->para.flagOfstepPrint)
         {
             //edit@12-03
@@ -423,8 +422,7 @@ void PrintSetting::showMachInfo(QString Mac)
 void PrintSetting::showRemoteControl(QString SuperNodeIP,QString EdgeIP)
 {
     QString VernonBach;
-//    VernonBach.sprintf("%d.%d.%02d%s%s_", UP_PRINTER_MAJOR_VER, UP_PRINTER_MINOR_VER,UP_PRINTER_RIVISION_VER,SUB_VERSION,SUB_RFID);
+    VernonBach.sprintf("%s.%s.", MACHINAE_VER, PUMP_VER);
-    VernonBach=SUB_RFID;
     VernonBach = VernonBach + (QString) Public::DateToString(__DATE__)+"_";//+UP_PRINTER_STAGE_VER;
 }
 
@@ -480,7 +478,7 @@ void PrintSetting::applyUIPara(){
             sysPara->status.cnt1CurrentValueInitDoneFlag = !ui->checkBoxResetCnt1CurrValue->isChecked();
             sysPara->status.cnt2CurrentValueInitDoneFlag = !ui->checkBoxResetCnt2CurrValue->isChecked();
             sysPara->status.cnt3CurrentValueInitDoneFlag = !ui->checkBoxResetCnt3CurrValue->isChecked();
-            //将vx4的分段计米功能迁移了，这个应用设置以及界面后续会删除 hlp todo 0602
+            //将vx4的分段计米功能迁移了，这个应用设置后续会删除 hlp todo 0602
 #ifndef COUNTER2_BY_GROUP
             if(sysPara->para.cnt1ByGroupEnalbe)
                 ApplyCnt1GroupSetting();
@@ -665,19 +663,6 @@ void PrintSetting::applyUIPara(){
             ui->checkBoxResetCnt3CurrValue->setChecked(false);
 
             emit checkPrintIntervalSignal();
-//            if(sysPara->para.EditMode==SCENE)
-//            {
-//                 QList<QGraphicsItem *> items = pGetPicScene->selectedItems();
-//                 if(items.size() > 0)
-//                 {
-//                     PicTextItem* picText = qgraphicsitem_cast<PicTextItem*>(items.at(0));
-//                     picText->CatchCnt1StartValue = ui->lineEditStartValue->text().toInt();
-//                     picText->CatchCnt1CurrValue = ui->lineEditCountValue->text().toInt();
-//                     picText->SpecialConditions = ui->radioButtonSpecialCondition->isChecked();
-//                     pGetPicScene->clearSelection();
-//                     //emit SwitchTimerShowItem(true);
-//                 }
-//            }
         }
 
 
@@ -842,11 +827,11 @@ void PrintSetting::ondialogAuthorizationAccepted(){
           ModuleDecimalDisplay();
           ModuleHideDisplay();
           displayForAdjustVoltage(sysPara->para.flagOfAdjustVoltage);
-          const int indexTab1=ui->tabWidget_2->indexOf(ui->tab_9);
+//          const int indexTab1=ui->tabWidget_2->indexOf(ui->tab_9);
-          if(sysPara->para.flagOfCnt1GroupDisp)
+//          if(sysPara->para.flagOfCnt1GroupDisp)
-              ui->tabWidget_2->addTab(ui->tab_9,tr("其他设置"));
+//              ui->tabWidget_2->addTab(ui->tab_9,tr("其他设置"));
-          else
+//          else
-              ui->tabWidget_2->removeTab(indexTab1);
+//              ui->tabWidget_2->removeTab(indexTab1);
           const int indexTab2=ui->tabWidget->indexOf(ui->tab_6);
           if(sysPara->para.flagOfstepPrint)
               ui->tabWidget->addTab(ui->tab_6,tr("跳米设置"));
@@ -867,11 +852,11 @@ void PrintSetting::ondialogAuthorizationAccepted(){
         ModuleDecimalDisplay();
         ModuleHideDisplay();
         displayForAdjustVoltage(sysPara->para.flagOfAdjustVoltage);
-        const int indexTab1=ui->tabWidget_2->indexOf(ui->tab_9);
+//        const int indexTab1=ui->tabWidget_2->indexOf(ui->tab_9);
-        if(sysPara->para.flagOfCnt1GroupDisp)
+//        if(sysPara->para.flagOfCnt1GroupDisp)
-            ui->tabWidget_2->addTab(ui->tab_9,tr("其他设置"));
+//            ui->tabWidget_2->addTab(ui->tab_9,tr("其他设置"));
-        else
+//        else
-            ui->tabWidget_2->removeTab(indexTab1);
+//            ui->tabWidget_2->removeTab(indexTab1);
         const int indexTab2=ui->tabWidget->indexOf(ui->tab_6);
         if(sysPara->para.flagOfstepPrint)
             ui->tabWidget->addTab(ui->tab_6,tr("跳米设置"));
@@ -926,11 +911,11 @@ void PrintSetting::ondialogAuthorizationAccepted(){
                 sysPara->para.flagOfCnt1GroupDisp = true;
             else
                 sysPara->para.flagOfCnt1GroupDisp = false;
-            const int indexTab1=ui->tabWidget_2->indexOf(ui->tab_9);
+//            const int indexTab1=ui->tabWidget_2->indexOf(ui->tab_9);
-            if(sysPara->para.flagOfCnt1GroupDisp)
+//            if(sysPara->para.flagOfCnt1GroupDisp)
-                ui->tabWidget_2->addTab(ui->tab_9,tr("其他设置"));
+//                ui->tabWidget_2->addTab(ui->tab_9,tr("其他设置"));
-            else
+//            else
-                ui->tabWidget_2->removeTab(indexTab1);
+//                ui->tabWidget_2->removeTab(indexTab1);
 
             if (type & 1<<3)
                 sysPara->para.flagOfstepPrint = true;
@@ -968,11 +953,11 @@ void PrintSetting::ondialogAuthorizationAccepted(){
 //edit@11-29 输入密码显示，再次输入隐藏
     else if(authString == "07710441"){
         //edit@12-03
-        const int indexTab=ui->tabWidget_2->indexOf(ui->tab_9);
+//        const int indexTab=ui->tabWidget_2->indexOf(ui->tab_9);
-        if(sysPara->para.flagOfCnt1GroupDisp)
+//        if(sysPara->para.flagOfCnt1GroupDisp)
-            ui->tabWidget_2->removeTab(indexTab);
+//            ui->tabWidget_2->removeTab(indexTab);
-        else
+//        else
-            ui->tabWidget_2->addTab(ui->tab_9,tr("其他设置"));
+//            ui->tabWidget_2->addTab(ui->tab_9,tr("其他设置"));
         sysPara->para.flagOfCnt1GroupDisp=!sysPara->para.flagOfCnt1GroupDisp;
 
     }
@@ -1066,6 +1051,8 @@ void PrintSetting::SpecailSettingsDisplay()
 {
    if(flagOfSpecailSettng)
    {
+       const int indexTab=ui->tabWidget_2->indexOf(ui->tab_11);
+       if (indexTab == -1)
            ui->tabWidget_2->addTab(ui->tab_11,tr("打印电压缩放"));
        ui->comboBoxIndustry->setVisible(1);
        ui->checkBoxNewAmplifyPlate->setVisible(1);
@@ -1081,8 +1068,8 @@ void PrintSetting::SpecailSettingsDisplay()
    {
        if(flagOfEngineeringMode)
            ui->tabWidget_2->removeTab(5);
-       else
+//       else
-           ui->tabWidget_2->removeTab(4);
+//           ui->tabWidget_2->removeTab(4);
        ui->comboBoxIndustry->hide();
        ui->checkBoxNewAmplifyPlate->hide();
 //       ui->labelRecommendedPrintSpeed->hide();
@@ -1099,14 +1086,17 @@ void PrintSetting::EngineeringModeDisplay()
 {
     if(flagOfEngineeringMode)
     {
+#ifdef COUNTER2_BY_GROUP
         ui->tabWidget_2->addTab(ui->tab_9,tr("其他设置"));
-        // hlp test todo
+        ui->tabWidget_2->addTab(sectionalWid, tr("分段计数"));
-     #ifdef COUNTER2_BY_GROUP /* 分段计米 */
+#endif
-        // 初始化先于bindSysPara
+
-        initSection();
+        if(flagOfSpecailSettng) {
-     #endif
+            const int indexTab=ui->tabWidget_2->indexOf(ui->tab_11);
-        if(flagOfSpecailSettng)
+            if (indexTab == -1)
                 ui->tabWidget_2->addTab(ui->tab_11,tr("打印电压缩放"));
+        }
+
         ui->tabWidget->addTab(ui->tab_8,tr("计数器3设置"));
         ui->tabWidget->addTab(ui->tab_6,tr("跳米设置"));
         ui->checkBoxSpeedOver->setVisible(1);
@@ -1134,11 +1124,13 @@ void PrintSetting::EngineeringModeDisplay()
         if(flagOfSpecailSettng)
         {
             ui->tabWidget_2->removeTab(5);
-            ui->tabWidget_2->removeTab(4);
+            const int indexTab=ui->tabWidget_2->indexOf(ui->tab_11);
+            if (indexTab == -1)
                 ui->tabWidget_2->addTab(ui->tab_11,tr("打印电压缩放"));
+        } else {
+//            ui->tabWidget_2->removeTab(4);
         }
-        else
+
-            ui->tabWidget_2->removeTab(4);
         ui->tabWidget->removeTab(3);
         ui->tabWidget->removeTab(2);
         ui->checkBoxSpeedOver->hide();
@@ -1491,6 +1483,7 @@ void PrintSetting::ApplyCnt1GroupSetting()
     updateCnt1GroupsTblWgt();
 #endif
 }
+
 void PrintSetting::rowWidgetCreate(int rowIndex)
 {
 #ifdef COUNTER1_BY_GROUP /* 分段计米 */
@@ -2308,8 +2301,10 @@ void PrintSetting::initSection()
         ui->tabWidget_2->addTab(sectionalWid, tr("分段计数"));
         connect(SectionalManager::instance(), &SectionalManager::sig_updateCntShow,
                 this, &PrintSetting::slt_updateCntShow);
-        SectionalManager::instance()->emitLoadUI();
+//        SectionalManager::instance()->emitLoadUI();
-    }
+    } /*else {
+        ui->tabWidget_2->addTab(sectionalWid, tr("分段计数"));
+    }*/
 }
 
 int tempReclaimTankStatus = 0;

QtUI.pro

@@ -57,7 +57,7 @@ DEFINES+=WARNING
 
 DEFINES+=TEMPMIMA
 DEFINES+=COUNTER1_BY_GROUP #分段计米
-#DEFINES+=COUNTER2_BY_GROUP #分段计米2
+DEFINES+=COUNTER2_BY_GROUP #分段计米2
 DEFINES+=_2DCODE_ #QR二维码
 DEFINES+=PICSCENE
 #DEFINES+=__2451WIFI__

SectionalCounting/sectionalmanager.cpp

@@ -25,6 +25,11 @@ void SectionalManager::emitLoadUI()
     emit sig_loadSettings2UI();
 }
 
+void SectionalManager::emitCancelSection()
+{
+    emit sig_cancelSection();
+}
+
 SectionalManager::SectionalManager()
 {
 

SectionalCounting/sectionalmanager.h

@@ -25,6 +25,8 @@ public:
     //应用配置
     void emitLoadUI();
 
+    // 取消分段计米
+    void emitCancelSection();
 private:
     SectionalManager();
 
@@ -33,7 +35,7 @@ signals:
     void sig_applySetting();
     void sig_loadSettings2UI();
     void sig_updateCntGroupDisp(bool);
-
+    void sig_cancelSection();
 };
 
 #endif // SECTIONALMANAGER_H

SectionalCounting/sectionalwid.cpp

@@ -18,6 +18,8 @@ SectionalWid::SectionalWid(QWidget *parent) :
             this, &SectionalWid::slt_loadSettings2UI);
     connect(SectionalManager::instance(), &SectionalManager::sig_updateCntGroupDisp,
             this, &SectionalWid::slt_updateCntGroupDisp);
+    connect(SectionalManager::instance(), &SectionalManager::sig_cancelSection,
+            this, &SectionalWid::slt_cancelSection);
 }
 
 SectionalWid::~SectionalWid()
@@ -152,7 +154,7 @@ void SectionalWid::on_cnt3RemoveAllRowsBtn_3_clicked()
 void SectionalWid::on_checkBoxGroupCnt1_clicked(bool checked)
 {
     // 信号修改计数器的显示
-    ui->checkBoxGroupCnt_2->setChecked(checked);
+//    ui->checkBoxGroupCnt_2->setChecked(checked);
     SectionalManager::instance()->emitUpdateCntShow(checked);
 }
 
@@ -234,27 +236,30 @@ void SectionalWid::rowWidgetCreate2(int rowIndex)
 
 void SectionalWid::LoadCnt2GroupSettingsToUI()
 {
-    ui->checkBoxGroupCnt_2->setChecked(sysPara->para.cnt2ByGroupEnalbe);
+    // 两个同时启用，这个cb设true就会都取消
+//    ui->checkBoxGroupCnt_2->setChecked(sysPara->para.cnt2ByGroupEnalbe);
     on_checkBoxGroupCnt_2_clicked(sysPara->para.cnt2ByGroupEnalbe);
-    //qDebug()<<"LoadCnt1GroupSettingsToUI:cnt1GroupCnt "<<sysPara->para.Cnt1ByGroup.cnt1GroupCnt;
     ui->tableWidget_2->setRowCount(sysPara->para.Cnt2ByGroup.cnt2GroupCnt);
     for(int i=0; i<sysPara->para.Cnt2ByGroup.cnt2GroupCnt; i++)
     {
         QSpinBox *spinBox = new QSpinBox();
         spinBox->setButtonSymbols(QSpinBox::NoButtons);
-        spinBox->setValue(sysPara->para.Cnt2ByGroup.cnt2GroupSettings[i].StartValue);
+        int startV = sysPara->para.Cnt2ByGroup.cnt2GroupSettings[i].StartValue;
+        spinBox->setValue(startV);
         spinBox->setRange(0, INT_MAX);
         ui->tableWidget_2->setCellWidget(i,0,spinBox);
 
         spinBox = new QSpinBox();
         spinBox->setButtonSymbols(QSpinBox::NoButtons);
-        spinBox->setValue(sysPara->para.Cnt2ByGroup.cnt2GroupSettings[i].EndValue);
+        int endV = sysPara->para.Cnt2ByGroup.cnt2GroupSettings[i].EndValue;
+        spinBox->setValue(endV);
         spinBox->setRange(0, INT_MAX);
         ui->tableWidget_2->setCellWidget(i,1,spinBox);
 
         spinBox = new QSpinBox();
         spinBox->setButtonSymbols(QSpinBox::NoButtons);
-        spinBox->setValue(sysPara->para.Cnt2ByGroup.cnt2GroupSettings[i].LoopTimes);
+        int loopV = sysPara->para.Cnt2ByGroup.cnt2GroupSettings[i].LoopTimes;
+        spinBox->setValue(loopV);
         spinBox->setRange(1, INT_MAX);
         ui->tableWidget_2->setCellWidget(i,2,spinBox);
     }
@@ -265,7 +270,7 @@ void SectionalWid::LoadCnt2GroupSettingsToUI()
 void SectionalWid::on_checkBoxGroupCnt_2_clicked(bool checked)
 {
     // 信号修改计数器的显示
-    ui->checkBoxGroupCnt1->setChecked(checked);
+//    ui->checkBoxGroupCnt1->setChecked(checked);
     SectionalManager::instance()->emitUpdateCntShow(checked);
 }
 
@@ -306,7 +311,8 @@ void SectionalWid::ApplyCnt2GroupSetting()
 {
     QSpinBox *spinBox = nullptr;
     sysPara->para.cnt2ByGroupEnalbe = ui->checkBoxGroupCnt_2->isChecked();
-    sysPara->para.Cnt2ByGroup.cnt2GroupCnt=ui->tableWidget_2->rowCount();
+    sysPara->para.Cnt2ByGroup.cnt2GroupCnt = ui->tableWidget_2->rowCount();
+    int r = ui->tableWidget_2->rowCount();
     if(sysPara->para.cnt2ByGroupEnalbe && sysPara->para.Cnt2ByGroup.cnt2GroupCnt==0)
     {
         sysPara->para.cnt2ByGroupEnalbe=false;
@@ -547,6 +553,12 @@ void SectionalWid::slt_updateCntGroupDisp(bool bChangeToNext)
     }
 }
 
+void SectionalWid::slt_cancelSection()
+{
+    ui->checkBoxGroupCnt1->setChecked(false);
+    ui->checkBoxGroupCnt_2->setChecked(false);
+}
+
 void SectionalWid::initUI()
 {
 #ifdef COUNTER1_BY_GROUP /* 分段计米 */

SectionalCounting/sectionalwid.h

@@ -64,7 +64,7 @@ private slots:
     void slt_applySetting();
     void slt_loadSettings2UI();
     void slt_updateCntGroupDisp(bool bChangeToNext);
-
+    void slt_cancelSection();
 private:
     Ui::SectionalWid *ui;
     SysPara* sysPara = nullptr;

TextEditOption.cpp

@@ -2,7 +2,7 @@
 #include "ui_texteditoption.h"
 #include "PicWidget.h"
 #include "scene/picscene.h"
-
+#include "SectionalCounting/sectionalmanager.h"
 #include <QFileDialog>
 #include <QDebug>
 #include <QInputDialog>
@@ -645,10 +645,13 @@ bool TextEditOption::maybeSave(){
         on_bottonSave_clicked();
         return false;
     } else if (msgBox.clickedButton() == cancleSaveButton) {
+        SectionalManager::instance()->emitCancelSection();
     	return true;
     }
-    else
+    else {
         return false;
+    }
+
 
 	return true;
 }
@@ -669,7 +672,6 @@ void TextEditOption::on_bottonNew_pressed()
 #ifdef   VARCOLOR
         textEdit->insertHtml(QString("<span style='background:#ffffff;color=#000000;'> &nbsp;<span />"));
 #endif
-
 }
 
 void TextEditOption::onOpenNewFile()

mainwindow.cpp

@@ -840,7 +840,10 @@ void MainWindow::updateSysStatusToUI(){ //100ms
                 sysPara->devOp->readbuilDat();
             }
             firstGetFpgaVersionNumFlag=1;
-            ui->labelFpgaVersionNum->setText(QString("%1/F%2.%3.%4").arg(SOFTWARE_VER_NUM).arg(0).arg(0).arg(0) );
+            QString ARM_Version;
+            ARM_Version.sprintf("%s.%s.", MACHINAE_VER, PUMP_VER);
+            ARM_Version = ARM_Version + (QString) Public::DateToString(__DATE__)+"."+SUB_VER+SUB_RFID;
+            ui->labelFpgaVersionNum->setText(QString("%1/F%2.%3.%4").arg(ARM_Version).arg(0).arg(0).arg(0) );
         }
         else{
             static bool logflag5 = true;
@@ -852,9 +855,10 @@ void MainWindow::updateSysStatusToUI(){ //100ms
                 emit readFPGAVersionReady();
                 logflag5 = false;
                 sysPara->devOp->writeFpgaPrintPara(true);
-                QString ARM_Version = SUB_RFID;
+                QString ARM_Version;
-//                ARM_Version.sprintf("%d.%d.%02d%s%s", UP_PRINTER_MAJOR_VER, UP_PRINTER_MINOR_VER,UP_PRINTER_RIVISION_VER,SUB_VERSION,SUB_RFID);
+                ARM_Version.sprintf("%s.%s.", MACHINAE_VER, PUMP_VER);
-                ui->labelFpgaVersionNum->setText(QString("A%1/F%2.%3.%4").arg(ARM_Version).arg(sysPara->status.fpgaVersionNum >> 12)
+                ARM_Version = ARM_Version + (QString) Public::DateToString(__DATE__)+"."+SUB_VER+SUB_RFID;
+                ui->labelFpgaVersionNum->setText(QString("%1/F%2.%3.%4").arg(ARM_Version).arg(sysPara->status.fpgaVersionNum >> 12)
                                                  .arg((sysPara->status.fpgaVersionNum>>8) & 0x0f).arg(sysPara->status.fpgaVersionNum&0xff) );
             }
         }

myinclude.h

@@ -7,8 +7,6 @@
 #define SYS_ROOT_DIR	"/home/plg/"
 #include "qnamespace.h"
 
-#define SOFTWARE_VER_NUM	"A3.09"
-
 #define MYSAVEFILEDLG  // 定义自己的保存文件对话框，解决系统对话框按键不弹起问题
 #define     LANINTERFACE_NAME "eth0"