/*
 * SysPara.cpp
 *
 *  Created on: Jun 25, 2013
 *      Author: yiyu
 *  QQ:1036184468
 *  Descriptoin:
 *
 *  2013-9-29   高压
 */


#include "SysPara.h"
#include <string.h>
#include <QFile>
#include <QIODevice>
#include <QDir>
#include <QMessageBox>
#include <QDebug>
//#include <qobject.h>
#include "LogInfo.h"
#define VNLG
SysPara::SysPara(void):
	devOp(new DevOp(this)){


    memset(&para,0,sizeof(para));
    memset(&status,0,sizeof(status));
    //qDebug("start to  loadParaFromFile.");
    loadParaFromFile();
    //qDebug("loadParaFromFile ok.");

    //para.HVFaultCloseEn= 0;

    if(para.ReadFileErrorCnt<10) para.ReadFileErrorCnt++;
    if(para.PowerOnErrorCnt<10) para.PowerOnErrorCnt++;
    // PowerOnErrorCnt
    //qDebug()<<"cnt ++:"<<para.ReadFileErrorCnt;
    if(para.ReadFileErrorCnt>3  || para.PowerOnErrorCnt>4) {
        //loadDefaultPara();
        memset( para.lastOpenedFileName,0,sizeof(para.lastOpenedFileName));
        if(para.ReadFileErrorCnt>=4 )
            para.ReadFileErrorCnt=0;
        if(para.PowerOnErrorCnt>=4)
            para.PowerOnErrorCnt=0;
        //qDebug()<<"sys Star Error, cnt :"<<para.ReadFileErrorCnt;
     }

    //saveParaToFile();//下面devOp->writeFpgaPrintPara(true)会调用这个，所以忽略

    //para.HVFaultCloseEn= 1; //开机默认为1，允许高压故障自动关闭回收功能

    devOp->writeFpgaPrintPara(true);	//系统起来的时候，将上次记录的配置写入fpga,比如晶振分频等信息
    devOp->writeFpgaVariCtrl();
    devOp->resumeFault();

    status.lastProductCnt = status.productCnt ;			//这会让产品计数显示出来
    status.gearPumpRunStopFlag = false;
    status.detectBestOscillatorFreqAppending = false;
    status.isPumpValveControledByHand = false;      //初始化为自动模式
    status.forTemplateUse = false;
    status.lastHighVoltageFault = false;
    status.needPowerOffTimerout = 0;
    status.circleProductCnt = false;
    status.flagOfWeiDaLiTCP = 0;
    status.flagOfWeiDaLiTCPClear = 0;
    status.flagLogInfo = 1;
    status.flagOfWeiDaLiTCPStartPrinting = 0;
    memset(para.reserved2,0,sizeof(para.reserved2));
#ifdef __RFID_CARD
    if(!loadRFIDPara()){
        memset(&RFIDPara,0,sizeof(RFIDPara));
        saveRFIDPara();
    }
#endif
}

void SysPara::loadParaFromFile(){
	QFile file(PARA_FILE_PATH);
    QFile DeviceCodefile(DeviceCode_FILE_PATH);
	QDir dir;
	char buf[200];
    //qDebug()<<"loadParaFromFile";
	if(!dir.exists(DOC_ROOT_DIR)){
		snprintf(buf,sizeof(buf),"mkdir -p %s",DOC_ROOT_DIR);
		system(buf);
	}
	if(!dir.exists(PARA_ROOT_DIR)){
		snprintf(buf,sizeof(buf),"mkdir -p %s",PARA_ROOT_DIR);
		system(buf);
	}
	if(!dir.exists(PARA_ROOT_DIR)){
                QMessageBox::warning(0,QString("warnning"),QString("Path") + PARA_ROOT_DIR + QString("not Found."));
		return ;
	}
	if(file.exists(PARA_FILE_PATH)){
            //qDebug("PARA_FILE_PATH");
        if(!file.open(QIODevice::ReadOnly)){
                        //QMessageBox::warning(0,("警告"),QString("无法打开配置文件 ") + PARA_FILE_PATH);
			loadDefaultPara();
		}
		else {
            //qDebug("PARA_FILE_PATH1");
#if 0
            QMessageBox::StandardButton ret = QMessageBox::Ok;
            qint32 copy_len;
			if(file.size() != sizeof(para)){
#ifdef VNLG
                ;
#else
                ret = QMessageBox::warning(NULL,QString("警告"),QString("配置文件大小不一致，按 确定 将采取兼容方式读取配置文件，否则将恢复成默认设置"),
                        QMessageBox::Ok | QMessageBox::Cancel, QMessageBox::Ok );

#endif
                if(ret == QMessageBox::Ok){
                    if(file.size()>sizeof(print))
                        copy_len = sizeof(print);
                    else
                        copy_len = file.size();
                    file.seek(0);
                    file.read((char *)&para,copy_len);
                    file.close();
                    //qDebug("normal load para");
                }
                else if(ret == QMessageBox::Cancel){
                    loadDefaultPara();//qDebug("loadDefaultPara");
                    file.close();
                }

			}
            else
#endif
            {
                file.seek(0);
				file.read((char *)&para,(long long int)sizeof(para));
				file.close();
                ////////////////////
                        if (DeviceCodefile.isOpen()) {
                            DeviceCodefile.close();
                        }
                        //jdDataRwLock.lockForRead();
                        if(!DeviceCodefile.open(QIODevice::ReadOnly)){//怀疑是QIODevice::Truncate 引起参数错误，去掉试试看
                            //QMessageBox::warning(0,"警告",QString("无法打开文件") );
                        }
                        else {
                            DeviceCodefile.seek(0);
                            //file.read((char *)&jd.addr,(long long int)sizeof(jd));
                            DeviceCodefile.read((char *)&para.Json_device_code,(qint64)sizeof(para.Json_device_code));
                            DeviceCodefile.close();
                        }
                        //////////////
			}
		}
	}
    else {
#ifdef VNLG
            ;
#else
        QMessageBox::information(0,QString("提示"),QString("这可能是你设备第一次上电，或是进行了出厂设置，我们将使用系统默认配置"));
#endif

        loadDefaultPara();
        //loadDefaultPara();//qDebug("loadDefaultPara2");
	}
    //qDebug()<<"SYSPrar:"<<sysFile<<"LO:"<<para.lastOpenedFileName;
    loadPrintParaFromFile(sysFile);


}

void SysPara::loadDefaultPara(){
#ifdef VNLG
            ;
#else

        QMessageBox::information(0,"提示2014","这可能是你设备第一次上电，或是进行了出厂设置，我们将使用系统默认配置");
#endif
        memset(&para,0,sizeof(para));
        para.startVoltage = 30;//首行电压
        para.endVoltage = 75;//行末电压
        para.HighVoltageAmplitude = 75;		//字高75%
        para.phaseHighCnt = 300;//高压阀值
        para.alterPrint.enable = 0;//交替打印
        para.stepPrint.enbale = 0;//跳米打印
        para.synPulseNumPerMm = 8;// 同步器参数 脉冲/毫米
        para.OuputPulseCol = 0;//桂林客户,精准控制输出脉冲的位置,精确到打印的列数
        para.gearPumpEnable = 1;

        para.oscillatorVoltage = 30;//晶振电压
        para.highVoltageLevel = 100;//高压包容差
        para.reclaimPumpPWMWidth = 50;//回收泵力度
        para.viscosityPumpInterval = 30;//粘度泵动作时间间隔
        para.reclaimTankTime = 25;//回收槽电机当前开关时长(s)
        para.septalPostion = 500;//隔膜位置
        para.pressure = 520;//压力
        para.viscosity = 1200;//粘度设定值
        para.temperature = 35;//喷头温度设定值
        para.divideRatio = (FPGA_SYS_HZ/64000)/2;//晶振频率

        para.phaseDetectVol = 35;//相位检测电压
        para.phase_detect_pulse_num = 7;//检测墨点数量
        para.phaseShift = -280;//相位偏移
        para.phaseHighLowRatio = 50;//相检
        para.phaseDetectDelay = 120;//检测延时
        para.enableChargeFullTime = 1;//充电占空百分比

        para.mixValveisNewVersion = 1;//混和阀是否是新管路
}

void SysPara::saveParaToFile(){
	QFile file(PARA_FILE_PATH);
    QFile DeviceCodefile(DeviceCode_FILE_PATH);

    if (DeviceCodefile.isOpen()) {
        file.close();
    }
        // qDebug()<<"saveParaToFile:"<<sysFile<<"LO:"<<para.lastOpenedFileName;

    if(!file.open(QIODevice::ReadWrite)){//怀疑是QIODevice::Truncate 引起参数错误，去掉试试看
#ifdef VNLG
        ;
#else

        QMessageBox::warning(0,QString("警告"),QString("无法打开配置文件 ") + PARA_FILE_PATH,
                     QMessageBox::Ok | QMessageBox::Cancel, QMessageBox::Ok );
#endif

	}
    else {

#ifdef DEBUG1
        qDebug()<<"sysFile:11"<<file.fileName()<<sizeof(para);
#endif
        if(file.isOpen()){
#ifdef DEBUG1
            qDebug()<<"sysFile:write"<<sysFile;
#endif
            file.seek(0);
            file.write((char *)&para,(long long int)sizeof(para));
            //#if defined(__CONVERTERBOARD__)|| defined(__VX__)
            #if 1
                    fsync(file.handle());
            #endif
                    file.close();
                    ///////
                    if(!DeviceCodefile.open(QIODevice::WriteOnly)){//怀疑是QIODevice::Truncate 引起参数错误，去掉试试看
                        //QMessageBox::warning(0,"警告",QString("无法打开文件:mac.bin") );
                    }
                    else {
                        DeviceCodefile.seek(0);
                        //file.write((char *)&jd.addr,(long long int)sizeof(jd));
                        DeviceCodefile.write((char *)&para.Json_device_code,(qint64)sizeof(para.Json_device_code));

                        fsync(DeviceCodefile.handle());

                        DeviceCodefile.close();
                    }
                        ////////////////
        }

#ifdef DEBUG1
        qDebug()<<"sysFile:close";
#endif
        if(sysFile!="")
        {
            if(sysFile=="")return ;
             if(!sysFile.endsWith(".dpn"))
                sysFile = QString( PARA_ROOT_DIR+QFileInfo( sysFile).baseName()+".dpn");

            savePrintParaToFile();

        }
	}
}


void SysPara::loadPrintParaFromFile(QString fileName){

       if(fileName=="") return;
       fileName = QString( PARA_ROOT_DIR+QFileInfo( fileName).baseName()+".dpn");
       QFile file(fileName);
        if(!file.exists(fileName)){
            //file.setFileName(TESTFILECD );
            return;
        }

        if(!file.open(QIODevice::ReadOnly)){
                  //QMessageBox::warning(0,"警告",QString("无法打开打印参数文件") + fileName);
                      //loadDefaultPrintPara();
        }
        else {
                        QMessageBox::StandardButton ret;
                        qint32 copy_len;
                        if(file.size() != sizeof(print)){
#ifdef VNLG
            ;
#else

                            QMessageBox::warning(NULL,QString("警告"),QString("文件是旧版软件生成，与当前版本参数不配套!") + fileName,
                                                 QMessageBox::Ok | QMessageBox::Cancel, QMessageBox::Ok );
#endif
                            if(file.size()>sizeof(print))
                                copy_len = sizeof(print);
                            else
                                copy_len = file.size();
                            file.seek(0);
                            file.read((char *)&print,copy_len);
                            file.close();
                        }
                        else {
                            file.seek(0);
                            file.read((char *)&print,(long long int)sizeof(print));
                            file.close();
                            memcpy( (char *)&para.alterPrint,(char *)&print.alterPrint,sizeof(alterPrint_t)) ;
                            para.charBold  = print.charBold ;

#ifndef CABLEUSER
                            para.SynCntEn  = 0 ;
                            para.autoSynSpeedEn  =0 ;
                            para.cnt1CurrValue  =0 ;
                            para.cnt1EndValue  = 0 ;
                            para.Cnt1NatureValue  =0 ;
#else
                            para.SynCntEn  = print.SynCntEn ;
                            para.autoSynSpeedEn  = print.autoSynSpeedEn ;
                            para.newAmplifyPlate = print.newAmplifyPlate;
                            para.cnt1CurrValue  =   print.cnt1CurrValue; // 20170313 cnt1StartValue;20191226 cnt1CurrValue
                            para.cnt1EndValue  = print.cnt1EndValue ;
                            para.Cnt1NatureValue  = print.Cnt1NatureValue ;
#endif

                            para.mixValveisNewVersion = 1;
                            para.cnt1RepeateValue  = print.cnt1RepeateValue ;
                            para.cnt1StartValue  = print.cnt1StartValue ;
                            para.cnt1StepValue  = print.cnt1StepValue ;
                            para.cnt2CurrValue  = print.cnt2CurrValue;//20170313 cnt2StartValue ; /// 20191226cnt2CurrValue
                            para.cnt2EndValue  = print.cnt2EndValue ;
                            para.cnt2RepeateValue  = print.cnt2RepeateValue ;
                            para.cnt2StartValue  = print.cnt2StartValue ;
                            para.cnt2StepValue  = print.cnt2StepValue ;

//                            para.cnt3CurrValue  = print.cnt3CurrValue;//20170313 cnt2StartValue ; /// 20191226cnt2CurrValue
//                            para.cnt3EndValue  = print.cnt3EndValue ;
//                            para.cnt3RepeateValue  = print.cnt3RepeateValue ;
//                            para.cnt3StartValue  = print.cnt3StartValue ;
//                            para.cnt3StepValue  = print.cnt3StepValue ;

                            para.cnt4CurrValue = print.cnt4CurrValue;
                            para.HiddenConditionValue = print.HiddenConditionValue;
                            para.HiddenFuncEnable = print.HiddenFuncEnable;
                            para.HiddenMeterEnable = print.HiddenMeterEnable;

                            para.currPrintMode  = print.currPrintMode ;
                            para.elecEyeTriggerInterval  = print.elecEyeTriggerInterval ;
                            para.eleEyeClearCntInSynMode  = print.eleEyeClearCntInSynMode ;
                            para.eleEyeTriggerPrintDelay  = print.eleEyeTriggerPrintDelay ;
                            para.eleEyeTriggerSynPrintEn  = print.eleEyeTriggerSynPrintEn ;
                            para.endVoltage  = print.endVoltage ;
                            para.extClearAllCntEnable  = print.extClearAllCntEnable ;
                            para.HighVoltageAmplitude  = print.HighVoltageAmplitude ;
                            para.lastLineEndPointFixedDACValue  = print.lastLineEndPointFixedDACValue ;
                            para.lastLineEndPointFixedValue  = print.lastLineEndPointFixedValue ;
                            para.FullColFixVal  = print.FullColFixVal ;

                            para.leftRightInverse  = print.leftRightInverse ;
                            para.lineEndAdjustPointCnt  = print.lineEndAdjustPointCnt ;
                            para.lineEndAdjustPointDelay  = print.lineEndAdjustPointDelay ;
                            para.outputPulseDelayMs  = print.outputPulseDelayMs ;
                            para.photoElectricityRepeateNum  = print.photoElectricityRepeateNum ;
                            para.pixNumPerCol  = print.pixNumPerCol ;
                            para.pointVoltageAdjustPos  = print.pointVoltageAdjustPos ;
                            para.PointVoltageAdjustValue  = print.PointVoltageAdjustValue ;
                            para.printColDelay  = print.printColDelay ;
                            para.printDelayMs  = print.printDelayMs ;
                            para.printDirection  = print.printDirection ;
                            para.printRowDelay  = print.printRowDelay ;
                            para.printTotalColNum  = print.printTotalColNum ;
                            para.printTriggerMode  = print.printTriggerMode ; //打印触发模式
                            para.productCntPerOutputPulse  = print.productCntPerOutputPulse ;
                            para.productNumToGenerateOutputPulse  = print.productNumToGenerateOutputPulse ;
                            para.pulseOutputEnable  = print.pulseOutputEnable ;
                            para.reducedPixelMode  = print.reducedPixelMode ;
                            para.reducedPixelNum  = print.reducedPixelNum ;
                            para.reducedPixelNumRatio  = print.reducedPixelNumRatio ;
                            para.scanInverse  = print.scanInverse ;
                            para.startVoltage  = print.startVoltage ;
                            //print.stepPrint  = print.stepPrint ;
                            memcpy( (char *)&para.stepPrint,(char *)&print.stepPrint,sizeof(stepPrint_t)) ;
                            memcpy( (char *)&para.adjVolDacRate,(char *)&print.adjVolDacRate,sizeof(print.adjVolDacRate)) ;
//edit-12.2
                            //para.synCharWidthRatio  = print.synCharWidthRatio ;
                            para.synClearCntInEleEyeMode  = print.synClearCntInEleEyeMode ;
#if 0 //不需要每个文件都存相位的参数
                            para.synPulseNumPerMm  = print.synPulseNumPerMm ;
                            para.synPulsePerMmX8  = print.synPulsePerMmX8 ;
#endif
                            para.synTriggerPrintLenMm  = print.synTriggerPrintLenMm ; //喷印间隔
                            //para.synTriggerPrintLenRatio  = print.synTriggerPrintLenRatio ;
                            para.sysTriggerPrintMode  = print.sysTriggerPrintMode ;
                            para.timeTriggerPrintDelayMs  = print.timeTriggerPrintDelayMs ;
                            para.timeTriggerPrintMode  = print.timeTriggerPrintMode ;
                            //para.totalSynPulseNum  = print.totalSynPulseNum ;
                            para.upDownInverse  = print.upDownInverse ;

                            para.varLen = print.varLen;
                            print.varLen1 = para.varLen1;
                            para.varLenEn = print.varLenEn?1:0;
                            para.headLen = print.headLen;
                            para.endLen = print.endLen;

                            para.set_HVData_Flag = 0;

                            para.eleMaskTime = print.eleMaskTime;
                            para.AltMirrorGap = print.AltMirrorGap;
                            para.textEditLineSpace = print.textEditLineSpace;
                            //para.weihu  = print.wehu;
                            //qDebug()<<"sysFile3:"<<file.fileName()<< para.cnt1StartValue;
#if 0 //不需要每个文件都存相位的参数
                            //para.phaseHighLowRatio = 55; // ui->spinBoxHighLowRatio->value();
                            para.phaseHighLowRatio = print.phaseHighLowRatio;
                            para.phaseShift = print.phaseShift;
                            para.OuputPulseCol = print.OuputPulseCol;
#ifndef FOR_PHASE_ADJUST
                            print.phase_detect_pulse_num = 7;
                            para.phaseDetectVol = 40;
                            print.phaseDetectDelay = 100;
#else
                            para.phase_detect_pulse_num = print.phase_detect_pulse_num;
                            if (print.phase_detect_pulse_num<3 || print.phase_detect_pulse_num>10) {
                                print.phase_detect_pulse_num = 7;
                            }

                            para.phaseDetectVol = print.phaseDetectVol;
                            if (print.phaseDetectVol < 28 || print.phaseDetectVol > 70)
                                print.phaseDetectVol = 35;

                            para.phaseDetectDelay = print.phaseDetectDelay;//120;// ui->spinBoxPhaseDetectDelay->value();
                            if (print.phaseDetectDelay < 70 || print.phaseDetectDelay > 150)
                                print.phaseDetectDelay = 100;
#endif
                            para.enableChargeFullTime = 1;
#endif
                        }
                }

}

void SysPara::loadDefaultPrintPara(){
//        memset(&print,0,sizeof(print));
//        print.alterPrint.enable = 0;
//        print.stepPrint.enbale = 0;
    loadDefaultPara();
}

void SysPara::savePrintParaToFile(){
//qDebug()<<"savePrintParaToFile";
    if(sysFile=="") return;
    QString fileName = QString( PARA_ROOT_DIR+QFileInfo( sysFile).baseName()+".dpn");
    //qDebug()<<"savePrintParaToFile1:"<<fileName;
    QFile file(fileName);

        if(!file.open(QIODevice::WriteOnly)){//怀疑是QIODevice::Truncate 引起参数错误，去掉试试看
                //QMessageBox::warning(0,"警告",QString("无法打开打印参数文件") + fileName);
        }
        else {
            //qDebug()<<"savePrintParaToFile2:"<<fileName<< para.cnt1StartValue;
            memcpy( (char *)&print.alterPrint,(char *)&para.alterPrint,sizeof(alterPrint_t)) ;
           // print.armrst  = para.armrst ;
            //qDebug()<<"File1:10";
            //print.autoSynSpeedEn  = para.autoSynSpeedEn ;

#ifndef CABLEUSER
                            print.SynCntEn  = 0 ;
                            print.autoSynSpeedEn  =0 ;

                            print.cnt1CurrValue  =0 ;
                            print.cnt1EndValue  = 0 ;
                            print.Cnt1NatureValue  =0 ;
#else
                            print.SynCntEn  = para.SynCntEn ;
                            print.autoSynSpeedEn  = para.autoSynSpeedEn ;
                            print.autoSynSpeedEn  = para.autoSynSpeedEn ;
                            print.newAmplifyPlate = para.newAmplifyPlate;
                            print.cnt1CurrValue  = para.cnt1CurrValue; // 20170313 cnt1StartValue;20191226 cnt1CurrValue
                            print.cnt1EndValue  = para.cnt1EndValue ;
                            print.Cnt1NatureValue  = para.Cnt1NatureValue ;
#endif

            print.charBold  = para.charBold ;
            print.cnt1RepeateValue  = para.cnt1RepeateValue ;
            print.cnt1StartValue  = para.cnt1StartValue ;
            print.cnt1StepValue  = para.cnt1StepValue ;
            print.cnt2CurrValue  = para.cnt2CurrValue ;
            print.cnt2EndValue  = para.cnt2EndValue ;
            print.cnt2RepeateValue  = para.cnt2RepeateValue ;
            print.cnt2StartValue  = para.cnt2StartValue ;
            print.cnt2StepValue  = para.cnt2StepValue ;

//            print.cnt3CurrValue  = para.cnt3CurrValue ;
//            print.cnt3EndValue  = para.cnt3EndValue ;
//            print.cnt3RepeateValue  = para.cnt3RepeateValue ;
//            print.cnt3StartValue  = para.cnt3StartValue ;
//            print.cnt3StepValue  = para.cnt3StepValue ;

            print.cnt4CurrValue = para.cnt4CurrValue;
            print.HiddenConditionValue = para.HiddenConditionValue;
            print.HiddenFuncEnable = para.HiddenFuncEnable;
            print.HiddenMeterEnable = para.HiddenMeterEnable;


            print.currPrintMode  = para.currPrintMode ;
            print.elecEyeTriggerInterval  = para.elecEyeTriggerInterval ;
            print.eleEyeClearCntInSynMode  = para.eleEyeClearCntInSynMode ;
            print.eleEyeTriggerPrintDelay  = para.eleEyeTriggerPrintDelay ;
            print.eleEyeTriggerSynPrintEn  = para.eleEyeTriggerSynPrintEn ;
            print.endVoltage  = para.endVoltage ;
            print.extClearAllCntEnable  = para.extClearAllCntEnable ;
            print.HighVoltageAmplitude  = para.HighVoltageAmplitude ;
            print.FullColFixVal  = para.FullColFixVal ;
            print.lastLineEndPointFixedDACValue  = para.lastLineEndPointFixedDACValue ;
            print.lastLineEndPointFixedValue  = para.lastLineEndPointFixedValue ;
            print.leftRightInverse  = para.leftRightInverse ;
            print.lineEndAdjustPointCnt  = para.lineEndAdjustPointCnt ;
            print.lineEndAdjustPointDelay  = para.lineEndAdjustPointDelay ;
            print.outputPulseDelayMs  = para.outputPulseDelayMs ;
            print.photoElectricityRepeateNum  = para.photoElectricityRepeateNum ;
            print.pixNumPerCol  = para.pixNumPerCol ;
            print.pointVoltageAdjustPos  = para.pointVoltageAdjustPos ;
            print.PointVoltageAdjustValue  = para.PointVoltageAdjustValue ;
            print.printColDelay  = para.printColDelay ;
            print.printDelayMs  = para.printDelayMs ;
            print.printDirection  = para.printDirection ;
            print.printRowDelay  = para.printRowDelay ;
            print.printTotalColNum  = para.printTotalColNum ;
            print.printTriggerMode  = para.printTriggerMode ;
            print.productCntPerOutputPulse  = para.productCntPerOutputPulse ;
            print.productNumToGenerateOutputPulse  = para.productNumToGenerateOutputPulse ;
            print.pulseOutputEnable  = para.pulseOutputEnable ;
            print.reducedPixelMode  = para.reducedPixelMode ;
            print.reducedPixelNum  = para.reducedPixelNum ;
            print.reducedPixelNumRatio  = para.reducedPixelNumRatio ;
            print.scanInverse  = para.scanInverse ;
            print.startVoltage  = para.startVoltage ;
            //print.stepPrint  = para.stepPrint ;
            memcpy( (char *)&print.stepPrint,(char *)&para.stepPrint,sizeof(stepPrint_t)) ;
            memcpy( (char *)&print.adjVolDacRate,(char *)&para.adjVolDacRate,sizeof(para.adjVolDacRate)) ;
//edit-12.2
            //print.synCharWidthRatio  = para.synCharWidthRatio ;
            print.synClearCntInEleEyeMode  = para.synClearCntInEleEyeMode ;
#if 0 //不需要每个文件都存相位的参数
            print.synPulseNumPerMm  = para.synPulseNumPerMm ;
            print.synPulsePerMmX8  = para.synPulsePerMmX8 ;
#endif
            print.synTriggerPrintLenMm  = para.synTriggerPrintLenMm ;
            print.synTriggerPrintLenRatio  = para.synTriggerPrintLenRatio ;
            print.sysTriggerPrintMode  = para.sysTriggerPrintMode ;
            print.timeTriggerPrintDelayMs  = para.timeTriggerPrintDelayMs ;
            print.timeTriggerPrintMode  = para.timeTriggerPrintMode ;
            print.totalSynPulseNum  = para.totalSynPulseNum ;
            print.upDownInverse  = para.upDownInverse ;
            print.eleMaskTime = para.eleMaskTime;
            print.AltMirrorGap = para.AltMirrorGap;

            print.varLen = para.varLen;
            print.varLen1 = para.varLen1;
            print.varLenEn = para.varLenEn;
            print.headLen = para.headLen;
            print.endLen = para.endLen;
#if 0 //不需要每个文件都存相位的参数
            print.phaseHighLowRatio = para.phaseHighLowRatio;
            print.phaseDetectVol = para.phaseDetectVol;
            print.phaseShift = para.phaseShift;
            print.phase_detect_pulse_num = para.phase_detect_pulse_num;
            print.phaseDetectDelay = para.phaseDetectDelay;
#endif
            print.OuputPulseCol = para.OuputPulseCol;
            int varNum=0;
            snprintf(print.QRvars[varNum].text,sizeof(print.QRvars[varNum].text),"%s",para.qrOption.text);
            snprintf(print.QRvars[varNum].text2,sizeof(print.QRvars[varNum].text2),"%s",para.qrOption.text2);
            snprintf(print.QRvars[varNum].textCnt,sizeof(print.QRvars[varNum].textCnt),"%s",para.qrOption.textCnt);
            varNum++;
            snprintf(print.QRvars[varNum].text,sizeof(print.QRvars[varNum].text),"%s",para.qrOption.text);
            snprintf(print.QRvars[varNum].text2,sizeof(print.QRvars[varNum].text2),"%s",para.qrOption.text2);
            snprintf(print.QRvars[varNum].textCnt,sizeof(print.QRvars[varNum].textCnt),"%s",para.qrOption.textCnt);
            print.textEditLineSpace = para.textEditLineSpace;
            //print.weihu  = para.wehu;
            //qDebug()<<"File1:1";
            if(file.isOpen())
            {
                file.seek(0);
                file.write((char *)&print,(long long int)sizeof(print));
//#if defined(__CONVERTERBOARD__)|| defined(__VX__)
#if 1
                fsync(file.handle());
#endif
                file.close();
                //qDebug()<<"File1:2";
            }
            //qDebug()<<"File1:3";
        }
}

void SysPara::showDebug(QString s){
#ifdef DEBUG1
    qDebug()<<s;
#endif
}
void SysPara::showDebug(int s){
#ifdef DEBUG1
    qDebug()<<s;
#endif
}

void SysPara::loadVolteParaFromFile(PRINT_MODE mode)
{
    QString volParaFilePath;
    unsigned int type = status.fpgaVersionNum >> 12;
    if(mode == FAST_PRINT )
    {
        volParaFilePath = ":/conf/VoltParaHi.bin";
    }
    else if(mode == STANDARD_PRINT)
    {
        volParaFilePath = PARA_ROOT_DIR"VoltParaStd.bin";
    }
    if(status.build_dat.builTime == 73)
        volParaFilePath = ":/conf/VoltePara_No73.bin";
    else if(type == 6){
        if(status.currPrintRow<=21){
            volParaFilePath = ":/conf/VoltDataStd21.bin";
        }
        else if(status.currPrintRow <=25){
            volParaFilePath = ":/conf/VoltDataStd25.bin";
        }
        else if(para.flagOf5Row5Dot){
            volParaFilePath = ":/conf/VoltDataStd5Row5Dot.bin";
        }
        else
            volParaFilePath = ":/conf/VoltDataStd32.bin";
    }
    QFile file(volParaFilePath);
#if 1
    QDir dir;
    char buf[200];
    if (!dir.exists(DOC_ROOT_DIR)){
        snprintf(buf, sizeof(buf), "mkdir -p %s", DOC_ROOT_DIR);
        system(buf);
    }
    if (!dir.exists(PARA_ROOT_DIR)){
        snprintf(buf, sizeof(buf), "mkdir -p %s", PARA_ROOT_DIR);
        system(buf);
    }
    if (!dir.exists(PARA_ROOT_DIR)){
        QMessageBox::warning(0, QString("warnning"), QString("Path") + PARA_ROOT_DIR + QString("not Found."));
        return;
    }
#endif
    if (file.exists(volParaFilePath)){
        if (!file.open(QIODevice::ReadOnly)){
        }
        else {
            QMessageBox::StandardButton ret = QMessageBox::Ok;
            qint32 copy_len;
            char *volteStruct = (char *)&voltePara;
            size_t sizeofVolteParaStruct = sizeof(voltePara);
            if(status.build_dat.builTime == 73){
                volteStruct = (char *)&voltePara_No73;
                sizeofVolteParaStruct = sizeof(voltePara_No73);
            }
            else if(type == 6){
                memset(&voltePara_25Dots,0,sizeof(voltePara_25Dots));
                volteStruct = (char *)&voltePara_25Dots;
                sizeofVolteParaStruct = sizeof(voltePara_25Dots);
            }
            if (file.size() != sizeofVolteParaStruct){
                qDebug()<<"注意，电压文件大小不对！";
                LogInfo::setRunStatusText(QString("注意，电压文件大小不对！"));
#ifdef VNLG
                ;
#else
                ret = QMessageBox::warning(NULL, QString("警告"), QString("配置文件大小不一致，按 确定 将采取兼容方式读取配置文件"),
                    QMessageBox::Ok | QMessageBox::Cancel, QMessageBox::Ok);

#endif
                if (ret == QMessageBox::Ok){
                        copy_len = file.size() < sizeofVolteParaStruct?file.size():sizeofVolteParaStruct;
                    file.seek(0);
                    file.read(volteStruct, copy_len);
                    file.close();
                }
                else if (ret == QMessageBox::Cancel){
                    file.close();
                }
            }
            else {
                file.seek(0);
                file.read(volteStruct, (long long int)sizeofVolteParaStruct);
                file.close();
            }
        }
    }
    else{
        qDebug()<<"There is no Volte Para File.";
        LogInfo::setRunStatusText(QString("There is no Volte Para File."));
    }
}
#ifdef __RFID_CARD
void SysPara::saveRFIDPara()
{
    QFile file(RFID_FILE_PATH);
    if (!file.open(QIODevice::WriteOnly | QIODevice::Truncate)) {
        qDebug() << "Error: Could not open file for writing";
        return;
    }
    QDataStream out(&file);
    out.setVersion(QDataStream::Qt_4_6); // Set the version compatible with Qt 4.8.5
    out << RFIDPara.PrintInkDots;
    out << RFIDPara.InkEmptyCnt;
    out << RFIDPara.SOLVEmptyCnt;
    out << RFIDPara.InkRFIDCnt;
    out << RFIDPara.SOLVRFIDCnt;
    out << RFIDPara.solventNumber;

    file.close();
}
bool SysPara::loadRFIDPara()
{
    QFile file(RFID_FILE_PATH);
    if (!file.open(QIODevice::ReadOnly)) {
        qDebug() << "Error: Could not open file for reading";
        return false;
    }

    QDataStream in(&file);
    in.setVersion(QDataStream::Qt_4_6); // Set the version compatible with Qt 4.8.5

    in >> RFIDPara.PrintInkDots;
    in >> RFIDPara.InkEmptyCnt;
    in >> RFIDPara.SOLVEmptyCnt;
    in >> RFIDPara.InkRFIDCnt;
    in >> RFIDPara.SOLVRFIDCnt;
    in >> RFIDPara.solventNumber;

    file.close();
    return true;
}
#endif